Item Description Providing, hoisting and fixing reinforment cement concrete in moulding and cornice etc. including including cost of required centering, shuttering and cost of reinforcement, with M-25 grade etc all complete as per drawing and direction by Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description Providing & Fixing chicken wire mesh of 22 gauge in junction of RCC and Brick work walls for internal Works fixed with U nails @ 150 mm c/c including scaffolding etc complete as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing glass reinforced concrete (GRC) customized jali 50mm thick on Aluminium Frame work (Tubular section of size as required). Approximate size of Jali 1100 mm x 1800mm). Basic Rate of jali 4200 Rs./SqM excluding taxes, freight and loading & unloading Estimated Cost (Inclusive of GST) |
Item Description Dismantling of building/ structures in entirety up to the ground level manually or with power machinery as approved by Engineer-in- charge including provision of necessary tools, tackle, plant scaffolding etc,following all safety requirements, ensuring adequate precaution to the neighborhood structures & equipment, putting necessary cover, removing debris outside station limit as directed by Engineer in charge all complete for making the site level,clear and tidy for construction of new building/structure etc. The rates shall be inclusive of rebate for servicable material. Note:-1. Buy back of all dismentling building materials of the existing building. The contractor shall be deemed to have full knowledge of the building being dismantled, which may be obtained from site inspection before submission of offer. 2. The work shall in general be done according to Latest CPWD specification. 3. Dismantling shall be allowed during day shift only & proper permission for the same shall be obtained. 4. Providing of necessary covers/barricades around the work area is to be done prior to dismantling operations. 5. The building shall be demolished stage by stage manually or with power machinery. Use of explosives or Dynamite shall not be allowed. 6. The unserviceable materials and rubbish shall be removed immediately during the course of demolition and disposed off as per Green Building norms at no extra cost .All required permissions & clearances shall be arranged by the Contractor. Dismantling of existing Building Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing white vitreous china wash basin under counter basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing CP brass auto closing system basin pillar tap of Jaquar PRS - 001 or Equivalent as approved by Engineer- In Charge Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required. Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of package type floor mounted RO plant complete with pre-treatment system comprising of feed water pump (1W+1S), MGF, ACF, dosing systems, RO membrances, RO high pressure pump (1W+1S), post treatment system comprising of dosing system; Antiscalent dosing system, UV Dose. The unit shall have all interlocking for safe operation of plant. The unit shall have MS skid mounted electrical panel complete with required starters and shall also have all Annuanciation and Controls. Indication instrumentation such as TDS meter at inlet/outlet, flow meter & totalizer, Pressure switches shall also be provided. The piping shall be HDPE for High Pressure Line. The filter shall be FRP and pumps shall be of SS construction. The basis of design shall be for feed water inlet TDS of 2000 PPM. Contractor is suggested to cary out the feed water chemical analysis and ensure suitability of RO plant operation. Make: BS Enviro/Thermax/Ion Exchange or equivalent as per direction of engineer incharge. (a) For 5000 LPH RO as described above. Estimated Cost (Inclusive of GST) |
Item Description Supply , Installation , Testing and Commissioning of Stainless Steel Water Storage Tank Grade SS -316 of 5000 liters capacity with 0.6mm thick , Fabrication of Inlet , outlet , overflow , drain , base etc . Stainless Tank Water Storage Tank shall be FDA Listed and NSF approved . Stainless Steel Water Storage Tank shall be Pressurized type and thickness of tank shall be 4 mm thick . Stainless Steel Water Storage Tank shall be duly insulated with 50 mm thick fibre glass wool insulation and 24 Gauge aluminium Cladding . Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SCH-40 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (a) 65 mm nominal outer dia Pipes Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SCH-40 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (b) 80 mm nominal outer dia Pipes Estimated Cost (Inclusive of GST) |
Item Description Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly valve, motorized valve controller with complete in all respect. (a) upto 50 mm dia. nominal bore Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing HDPE Pop Up Sprinkler Irrigation System Pop height 100 mm with fittings all complete as per direction of engineer in charge. Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. (a) 150 mm diameter Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. (b) 200 mm diameter Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. (c) 250 mm diameter Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing & commissioning of variable speed hydropneumatic system mounted on a common base plate comprising of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, shaft directly coupled to a TEFC induction motor with class IE -3 efficiency and IP 55 Protection and class F insulation suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, two Nos. variable frequency drives, one No.remote sensors, transmitters, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, two Nos. required capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including suction and delivery headers of G.I "C" class pipe of required dia, isolation valves, NRV of PN-16 grade & vibration eliminators on both suction & delivery side of pumps, power box, equipped with fuses/ isolators/circuit breakers as required. No. and capacity of Pressure Vessel - 01 Nos. x 200 litres min. (Or as per Manufacturer Calculations) The system shall also comprise the following:- Control Panel with Programmable Logic Controller (PLC) with in-built PID controller with 16 inputs and 12 outputs, digital display with fluorescent screen with 2 lines of 20 character each equipped with 8 function keys and 9 service keys, 3 Phase, 415 V I/P, 4 KW, AC variable speed drive with in-built EN55011 Class A RFI Filters, having standard function of BI Loop , energy saving, catching a spinning load with speed search, auto hunting jog, preset speeds, controlled stop on loss of supply power loss side through, D.C. injection braking, fast stop. Drive should have selectable, rated input frequency 50/60 Hz and output frequency range of 0.5-32 HZ, contractors, overlead relays and MCBs should confirm to IEC-898-1995 standards Ammeter, voltmeter. All strip indication should blink in case of trip and panel should only be accessible through an access code. Type 8202 pressure transducer with SS pressure sensor and control electronic board. Output 4-20m A on two wires conforming BS-6134 standards and IP 55 protection class. Domestic Water Transfer Pump (at existing pump room for science block) Set of Two pumps (1 Working + 1 Standby) Capacity - 275 LPM, Head - 60.0 Mtr., Eff. - Class IE-3 Estimated Cost (Inclusive of GST) |
Item Description Flushing Water Transfer Pump ( at existing pump room for science block ) Set of Two pumps (1 Working + 1 Standby), Capacity - 180LPM, Head - 60.0 Mtr. Eff. - Class IE-3 Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing S.S grating of approved quality and colour. Circular type 125 mm nominal dia. Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing CP liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Providing & Fixing water purifier cum water cooler made of stainless steel having storage capacity of 40 liter & cooling capacity 40 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge . Estimated Cost (Inclusive of GST) |
Item Description Supplying, storing, handling, shifting, installation, testing and commissioning of CP flxible hose, spray, wall flange of Make- Jaquar/ Cera/ Kohler/Marc or equivalent as per direction of the engineer in charge with all fittings and fixtures all complete job as per direction of the engineer in charge . Estimated Cost (Inclusive of GST) |
Item Description Providing, fitting & fixing of CP Bib Cock two in one Make- Jaquar/ Cera/ Kohler/Marc or equivalent as per direction of the engineer in charge all complete job as per direction of the engineer in charge . Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 80 mm dia Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 150 mm dia Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 200 mm dia Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing Fire Extinguishers (CO2 type powder ) 22.5 Kg Capacity ( heel type ) complete with all accessories as per manufacturers specifications. ( Pump room ) Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing GM fire Brigade Suction hose coupling (Draw out Connection) with nut for female coupling as per IS:902-1974 complete with 100mm dia. 1 No C.I Foot valve flanged (to be connected to static water tank) Estimated Cost (Inclusive of GST) |
Item Description Supply, installation and fixing weather proof of M.S. fire hose cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings & accessories. The box shall have a front glass door with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) - for external and roof hydrant all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Supply, installation and fixing of MS Axe of approved by St.John Ambulance Brigade /Indian Red Cross society or equivalent as per direction of engineer incharge conforming to IS : 2217 - 1963 all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Doors and frame Supply, installation and fixing of MS door frame 1200x2100 door capable of accommodating fire hose reel, landing valve, hose pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) Cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making 1200x600x2100 Recessed type mansoary box all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below: 4 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder of Make :- ABC/Eco Fire or equivalent all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below: 6 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder of Make :- ABC/Eco Fire or equivalent all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Supply, installation and fixing of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Switch Control Secondary Points) Group C Estimated Cost (Inclusive of GST) |
Item Description Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) Primary point controlled by one MCB. Estimated Cost (Inclusive of GST) |
Item Description Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning of 5W LED mirror light shall be 6500K. equivalent as specified in the approved list of make.) Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, Testing and Commissioning of 65W Surface mounted LED circular Downlighter (Cat no-Bajaj Lighting or equivalent as specified in the approved list of make) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT PANEL-MDB PANEL SCIENCE BLOCK-Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT PANEL-FLOOR PANEL/VTPN SCIENCE BLOCK-Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT PANEL-MDB UPS PANEL SCIENCE BLOCK-Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT PANEL-MDB OUTPUT PANEL SCIENCE BLOCK-Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT PANEL-MDB LIFT PANEL SCIENCE BLOCK-Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description 80 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V + 1%), 50 Hz, IGBT based technology, Input harmonic Current THD <=3% typical at 100% load, ,<=6% maximum at 100% load with inbuilt Isolation Transformer and 30 min battery backup for each UPS along with battery cabinet, Parallel card, BMS Port & communication card complete in all respect including supporting steel structure for UPS and Battery as required.Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to batteries etc complete in all respect and as per direction of Engineer in Charge. Estimated Cost (Inclusive of GST) |
Item Description Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561. Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 2C x 6 sq.mm. (19mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 2C x 10 sq.mm. (19mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 25 sq.mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 35 sq.mm. (32mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 50 sq.mm. (35mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 70 sq.mm. (38mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 95 sq.mm. (45mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 120 sq.mm. (45mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 150 sq.mm. (50mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 240 sq.mm. (62mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 300 sq.mm.(70mm) Estimated Cost (Inclusive of GST) |
Item Description 1C X 50 sqmm Cu flexible(Unarmoured) cable Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Trays-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required..150 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Trays-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Trays-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Trays-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. 600 mm width X 62.5 mm depth X 2.0 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Bends- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Bends- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Bends- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Tee's- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee's with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Tee's- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee's with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Tee's- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee's with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Cross Members- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Cross Members- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Cross Members- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness Estimated Cost (Inclusive of GST) |
Item Description Supplying & installing UTP networking Cat-6 cable suitable for LAN/WAN computer net working as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent as per direction of engineer in charge) Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing with Dome Camera Form factor 2 Megapixel high resolution Usage Indoor Usage Lens 1/3" angle of view: Day /night IR as per technical specifications including carriage and necessary required equipment all complete job as per direction of E/I Make Secure eye, Hikvision, CP Plus or equivalent as per direction of engineer in charge. Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing with bullet Camera Form factor 2 Megapixel high resolution Usage Indoor Usage Lens 1/3" angle of view: Day /night IR as per technical specifications including carriage and necessary required equipment all complete job as per direction of E/I. Make Secure eye, Hikvision, CP Plus or equivalent as per direction of engineer incharge. Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing of All-in-one Video Network recording solution (NVR) for up to 16 channels, Pre-installed, pre-configured IP storage solution with 8 TB storage capacity, RAID-5 protected,Hot-swappable hard drives, Temperature +10 °C to +35 °C, Relative humidity-8 to 90% (non-condensing), Recording shall be calculated for all cameras at full frame rate & resolution for 15 days as per technical specifications all complete job as per direction of E/I Make- Secure eye/Hikvision//CP Plus or equivalent as per direction of engineer incharge. Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing Hard Disk with Storage Capacity - 6 TB, HDD Type -Surveillance, Make- Seagate, WD, samsung or equivalent as per direction of the engineer in charge. Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing of Networking Poe Switch, 10/100/1000 BT ports, 8 ports providing PoE as per 802.3a/f as per technical specifications all complete job as per direction of E/I (Make- D-Link / Cisco/ Panasonic or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying, Installing, Testing & Commissioning of Desktop Computer with Intel core 8th Generation Intel® Core? i7 processor, 8 GB RAM, 2 TB HDD storage, (WIFI/BT), 256 GB SSD storage USB Keyboard, USB Mouse, Preofessional Win10, 18.5?TFT having 3 Years Onsite warranty as per technical specifications including carriage and necessary required equipment all complete job as per direction of E/I (Make-DELL/ACER/LENOVO/HP or equivalent as per direction of the engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing Display Panel with Screen Size- 32-inch Aspect Ratio- 16:9 Panel Backlight -IPS/Direct-LED Backlight Scanning -100Hz Resolution -1920 X 1080 pixels Viewing Angle-178 X 178 VIDEO IN -RCA X 1 AUDIO IN (L/R)/PC AUDIO IN -RCA Pin Type X 2 HDMI IN- TYPE A Connectors X 2 COMPONENT IN- Y, PB/CB, PR/CRX1 USB Input -USB 2.0 X 1as per technical specifications including carriage and necessary required equipment all complete job as per direction of E/I (Make:- Samsung/Sony/LG/Panasonic or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description HDMI to HDMI cable of 3 meter length as per technical specifications including carriage and necessary required equipment all complete job as per direction of E/I Estimated Cost (Inclusive of GST) |
Item Description Supllying,Installing,Testing and Commisioning of 6U Rack as per technical specifications including carriage and necessary required equipment all complete job as per direction of E/I. Make: VALRACK/D-LINK/Net Rack or equivalent as per direction of engineer incharge. Estimated Cost (Inclusive of GST) |
Item Description Supply , Installtion , Testing and comissioning of 42 port loaded LIU with adaptor plates , pigtel cables for connections. Estimated Cost (Inclusive of GST) |
Item Description Supply , Installtion , Testing and comissioning of LC-LC singlemode fiber patch cord. Estimated Cost (Inclusive of GST) |
Item Description Supply , Installtion , Testing and comissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination. Estimated Cost (Inclusive of GST) |
Item Description Supply , Installtion , Testing and comissioning of CAT6 patch cord 7 feet for user termination to information outlet Rack End. Estimated Cost (Inclusive of GST) |
Item Description Supplying & installing UTP networking Cat-6 cable suitable for LAN/WAN computer net working as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing of 6 Core Optical Fibre cable in prelaid PVC conduits / pipes / raceway all complete job as per direction of E/I. (Make: Finolex/havells or equivalent as per direction of the engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing of 3x3 I/O box with face place Female Rf45 as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing of CAT 6 Giga Speed 1.2 m Patch Cord as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco) Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of 12 U Networking Rack with Glassdoor all complete job as per direction of E/I (Make:- MATRIX/Dlink./Panasonic or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying,Installing,Testing of 1 G SFP Module as per technical specifications all complete job as per direction of E/I. (Make- D-Link / Cisco/ Panasonic or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. 02 loop Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing & commissioning of addressable manual call point complete as required. Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. Estimated Cost (Inclusive of GST) |
Item Description Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Estimated Cost (Inclusive of GST) |
Item Description Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25mm Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm. Estimated Cost (Inclusive of GST) |
Item Description Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required. 10 Pair Cable As per Estimated Cost (Inclusive of GST) |
Item Description Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required. 2 Pair Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of Telephone Sets (analog and digital) shall be line powered from the system and connected on two wires (single pair) only all complete job as per direction of E/I. Make: BEETEL/ Panasonic/Motorola or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of 50 PAIR KRONE BOX all complete job as per direction of E/I Estimated Cost (Inclusive of GST) |
Item Description Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing and commissioning of 70W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly & modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 6500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller & Intelligent control module/sensor with higher reliability, long service life, suitable for easy & quick installation. Wipro Cat No.:LR 14-591-XXX-65-XX. or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB?s and terminal block. Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete. Estimated Cost (Inclusive of GST) |
Item Description Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete. Estimated Cost (Inclusive of GST) |
Item Description 11 KV HT DP STRUCTURE-Supply, Installation, testing and commissioning of 11 KV DP structure as per CEI & HPSEB norms & comprising of the following, but not limited to it for completion of works,1.1-RSJ pole of 9.15 mt length of size 175 x 90 mm complete with suitable M.S. base plate welded at bottombase plate - 2 Nos. 1.2-MS Channel of size 100 x 50 mm, length 4 mts (approx), 1.3-11 KV AB switch - 1 set, 1.4-11 KV Horn Gap fuse Unit - 1 set, 1.5-11 KV Lightning Arrestor , 1.6-11 KV Disc insulator, 1.7-11 KV Pin insulator , 1.8- 6 SWG copper wire for jumpering, 1.9-Supply and erection of Stay set complete with necessary foundation, excavation and refilling of earth etc. as required. 1.10-Concrete foundation for RSJ poles burrioed upto a depth of 1830 mm in ground in a pit of size 450X450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work., 1.11-Necessary Nut, Bolts, clamps, operating handle for AB switch, clamping welding etc. complete as required. 1.12-Painting the RSJ poles complete with two coat of Red Oxide and two coats of GI enamel paints complete as required. Note:-Transpotation of all materials and accessories at site, Complete erection, testing and commissioning. Estimated Cost (Inclusive of GST) |
Item Description 11 KV H.T. METERING PANEL (INDOOR TYPE): Supply, Receiving, Unloading, Storing, Shifting, Installation, Testing & Commissioning of indoor type floor mounted, dust, damp and vermin proof, cubicle HT. Metering Panel made out of 14 gauge CRCA sheet steel complete with 5 Amp electronic trivector meter, C.T.'s of 120/60/5 Amp, 0.5 Class, 10 VA Burden, and P.T's of 11 KV / ?3, 110V / ?3, 100 VA conforming to relevant IS Standards and complete as required. H.T. Metering cubicle along with C.T.'s, P.T.'s and trivector meter shall be got tested and approved from local electricity supply authority. The GA drawing shall be got approved by SEB/ local statutory authorities before fabrication. Estimated Cost (Inclusive of GST) |
Item Description 11 KV HT SWITCHBOARD ( THREE PANEL) - INDOOR DUTY: Supply, installation , testing and commissioning of a Three panel ( One Incomer + Two Outgoing ) indoor duty totally enclosed sheet steel clad floor mounting, vermin proof, fully interlocked vertical isolation, extensible, horizontal draw out, air insulated, metal clad switchboard having double isolation features complete with circuits as detailed below. The switchboard would be complete with necessary PVC insulated copper busbars, small wiring, labels, cable eyes, cable termination to receive XLPE cables, foundation bolts and suitable for operation on 11 kV 3 phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA .This HT panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All Incoming and outgoing feeders shall have fault trip auxiliiary contacts for wiring to annunciation fault trip indication panel. One Incoming panel equipped with : 1- Air insulated metal clad housing,1- set of 3 phase PVC insulated copper busbars 630 amps rating, 6- single pole cluster type isolating contacts i.e. plug and switches, 1- Triple pole draw out truck mounted 11kV, 350 MVA, 630 Amps Vacuum Circuit Breaker fitted with arc control devices., 6 NO/NC contacts for remote ON/OFF/TRIP status at BMS , 1- Trip free 230 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches, emergency hand trip device and mechanical 'OFF' & 'ON' indicator., 1 - 24 Volt DC shunt trip coil, 1 set-Dual Core Cast Resin Current transformers of ratio 120/60/5A Class 5P10 and Class 0.5, 15 VA burden for protection & metering., 1- 3 Phase cast resin horizontal draw out line potential transformer ratio 11 KV/?3:110/?3 Volt, class 0.5, 200 VA connected with H.V. and L.V. connections, H.V.fuses and LV MPCB of adequate rating to withstand fault level in PT circuit, isolating plugs for H.V. and L.V. connection., 1- Strip heater to prevent absorption of moisture. The instrument and relay panel fitted with : 1- Square voltmeter of 96 x 96 mm scaled 0-15000 volt with 3 way and OFF selector switch., 1- Square Ammeter of 96 x 96 mm scaled 0-200 amps with 3 way and OFF selector switch., Estimated Cost (Inclusive of GST) |
Item Description Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger ( SMPS Based ) with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge. Estimated Cost (Inclusive of GST) |
Item Description DISTRIBUTION TRANSFORMERS: Supply, Installation, testing and commissioning of Oil Type Transformer 800 KVA 11/0.433 KV, 3 Phase, 50 Hz, Dyn 11 vector group, copper wound, class F insulation associated with On Load Tap Changer (OLTC) plus AVR and RTCC Panel for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote manual operation of On Load Tap Changer, winding temperature indicator/ controller actuated by means of resistance temperature detector embedded in LV windings, indoor type Transformer with impedance as per latest ECBC norms, tapping for off load operation on HV side in steps of +5% to - 15% in steps of 1.25% 17 steps to give a constant secondary voltage, having cable end boxes on HV side suitable for 3C x 300 sqmm XLPE cable of 11 KV grade and bus trunking as required on LV side with neutral brought out separately including supplying and laying of copper conductor multicore control cables for safety tripping, suitably mounted on M.S. Channel i/c supplying and grouting of suitable M.S. Channel with all accessories and conforming to IS 11171:1985, IEC 60726, ANSI, NEMA standards & as per specification complete in all respects as required at site. Transformer Losses shall be as per ECBC 2017. Transformer described as above. Estimated Cost (Inclusive of GST) |
Item Description Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per relevant IS code and technical specifications: 3C x 300 sq.mm. XLPE insulated Aluminium. Armored. Cable Estimated Cost (Inclusive of GST) |
Item Description Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm. Estimated Cost (Inclusive of GST) |
Item Description supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 300 sq. mm Estimated Cost (Inclusive of GST) |
Item Description Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 300 sq. mm Estimated Cost (Inclusive of GST) |
Item Description Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation. Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge Estimated Cost (Inclusive of GST) |
Item Description Supply of First Aid box as directed by Engineer Incharge Estimated Cost (Inclusive of GST) |
Item Description Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge. Estimated Cost (Inclusive of GST) |
Item Description Supplying & fixing standard shock treatment charts in English & Hindi duly framed and covered with glass as directed by Engineer Incharge. Estimated Cost (Inclusive of GST) |
Item Description Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 11KV dielectric strength AS PER relevant IS Code Estimated Cost (Inclusive of GST) |
Item Description Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code Estimated Cost (Inclusive of GST) |
Item Description SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF DG SET INCLUDING ALL ACCESSORIES: Design, manufacture, supply, erection, testing & commissioning of following rating of DG Sets in Accoustic Enclosure, having self excited & self regulated 415 V, 3 Phase, 4-Wire, 50 Hz, 0.8 p.f. Alternator coupled with multi-cylinder, turbo-charged/ turbo-charged after cooled as called for, Diesel Engine capable to generate the power not less than the required BHP to achieve the alternator capacity as given below, with radiator Cooled, hospital type silencers and Electronic governer (G3 Governing System), DG set controller suitable for Auto Synchronization & Auto Load Sharing with microprocessor based Synchronization relay like Woodward/Dief/ Deepsea or equivalent including providing of Engine control panel, 24V batteries of suitable rating, battery-charger with battery leads, inbuilt oil fuel tank of capacity as per OEM standards and complete with all standard accessories & protection as required and as per specifications, including first filling of lube oil, fuel tank, providing common base plate, anti vibration pads, drip trays, foundation bolts, nuts, bolts, cable termination/adopter box sutiable to terminate upto 8 nos. of 3.5Cx300 sq.mm. XLPE cables as required for a complete installation including RCC/PCC foundation for DG set as per the structural detail for Dynamic Load submitted by the Vendor and approve by the Client. DG set should comply relevant Indian standards. DG shall have Remote Monitoring System. 1010 KVA (With Acoustic Enclosure) Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe Class C Heavy duty conforming to IS:3589 with all fixing accessories and hardwares.The work include necessary cladding of exhaust pipe work using 50 mm thick Loosely bound resin (LBR) mattress/ mineral wool/ Rockwool, density not less than 120 kg/m3 and aluminium cladding (0.6 mm thick) for the complete portion. The exhaust pipe work includes necessary supports, foundation etc. to avoid any load & stress on turbo charger / exhaust piping.The exhaust pipe shall be run along the existing wall of the building duly clamped/supported on independent structure for which, the design and Drawing for such structure shall be got approved from the Engineer-in. 400mm dia Estimated Cost (Inclusive of GST) |
Item Description Design, supply, fabrication and erection of steel structure from channel /angle iron of suitable sizes to support the chimney /exhaust MS pipe duly taking into consideration of the wind load/pressure at the site etc. including the cost of civil foundations as required to support a maximum of 2 nos exhaust chimneys on the overhead platform complete as required. The structure shall be given primer coat and two coats of enamel painting. Estimated Cost (Inclusive of GST) |
Item Description SS Flexible Bellow 400 mm dia Estimated Cost (Inclusive of GST) |
Item Description Aluminium cladding for the residential silencers Estimated Cost (Inclusive of GST) |
Item Description Supply & Fixing of Y Bend for Exhaust pipe Estimated Cost (Inclusive of GST) |
Item Description Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections. 50 mm x 6 mm thick Cu flat Estimated Cost (Inclusive of GST) |
Item Description Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections. 50 mm x 6 m thick GI flat Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 2C x 6 sq.mm. (19mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 2C x 10 sq.mm. (19mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 35 sq.mm. (32mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 95 sq.mm. (45mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 120 sq.mm. (45mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 150 sq.mm. (50mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 185 sq.mm. (57mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 240 sq.mm. (62mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 300 sq.mm.(70mm) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT Panel : Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description Capacitor Panel : Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description EXTERNAL LIGHTING FEEDER PILLAR-1 (Outdoor Type weather proof, double door with canopy IP-65): Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description SITC of Lazer diode projector with Light Output (Standard Center)5000 ANSI. Display system: 3 LCD system. Display device: 0.64" * 3 BrightEra LCD Panel. Number of Pixels : 69,12,000 (1920*1200*3) Pixels. Support 4K 30P input . Contrast Ratio : ?:1 (Infinite). Laser Life : 20,000 Hours Lazer Diode. Screen Size: 40" to 300" ( measured Diagonally). Throw ratio : Throw ratio: 1.23 : 1 to 1.97 : 1. Lens shift: Manual ; Vertical: -35% to +55% ; Horizontal: +/- 15%. Keystone Correction: Vertical: +/- 30 degree ; Horizontal: +/- 30 Degree. Connectivity Ports: Mini D-sub 15-pin, HDMI (2), HDBaseT, Video In, Audio In, Audio Out. Control Ports: RS232, USB Type A, RJ45. Smart features: Reality Creation, Intelligent Settings, Bright View.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-BENQ/PANASONIC/SONY or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of customised ceiling mount for projector (custom) Estimated Cost (Inclusive of GST) |
Item Description SITC of 150" diagonal(WxH-127" x 79") 16:10 ratio HD febric motorized screen with remote control. (MAKES-DALITE/PRIMA/TELONE or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 55" diagonal commercial flat panel LED display , resolution-3840x2160,3 nos HDMI inputs,one USB input,RJ45 connector, Blutooth ,WIFI, USB media player, 2 nos of inbuilt speakers (10W+10W) complete with wall mount kit (PANASONIC/SAMSUNG/LG or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 70 Inches or above display Panel, Technology IPS Native Resolution 3840 x 2160 (UHD) Typical Brightness 250cd/m2. Static contrast Ratio 4500:1. Picture Engine: HDR10+. Safety UL, BIS, EMC & Energy Star FCC A. (PANASONIC/SAMSUNG/LG or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Installation and Commissioning of Display Screen size Diagonal 65" Backlight DLED Resolution 3840 x 2160 Aspect Ratio 16 : 9 Brightness 350nits Contrast Ratio 1200:1 Viewing Angle 178 degree (H) / 178 degree (V) Color gamut (x% NTSC) 68% Frame Rate 60Hz Response Time 8ms Panel bit 8-bit Light life 30,000hrs Orientation Landscape Built-in speaker 16W x 2 Input Power (AC) Inlet x 1 Audio line-in x 1 Composite video No Composite audio No Component video (RCA) No D-sub x 1 HDMI x 3 (2.0 x 3) Type A (USB Playback) x 5 ( USB 2.0 x 2 + USB 3.0 x 3) RS232 x 1 S-video No SPDIF x 1 LAN x 1 Output Microphone No RS232 No HDMI x 1 Line out (3.5mm) x 1 COAX No Others NFC Reader/Writer No IR receiver x 1 Dimension (WxHxD) (Without Packing / With Packing) 1488.7 x 938.9 x 115.6mm / 1675 x 1056 x 220mm Net Weight/Gross Weight 41.2Kg / 55.5Kg Power supply AC100 to 240V, 50 / 60 Hz Power consumption 240W (max.) other peripherals as per technical specifications and as directed by engineer in charge. Estimated Cost (Inclusive of GST) |
Item Description SITC of Display Screen size Diagonal 65" 4K Interactive Display dual-pen writing with a 3mm diameter pen tip2.1 Stereo sound with a built-in woofer Built-in myViewBoard? whiteboarding software to collaborate on the go 4-way split screen content sharing with built-in ViewBoard® Cast software LAN sharing with slot-in PC Built-in RS232 port and vController software for remote control Panel Size 65" Type/Tech TFT LCD Module with DLED Backlight. Display Area (mm) 1431 (H) x 807 (V) (64.5? diagonal) Aspect Ratio 16:9 Native Resolution UHD 3840x2160(Pixels) Colours 1.07B colours (10bit) Brightness 350 nits (typ.) 300 nits (min.) Contrast Ratio 5000:1 (DCR) Response Time 8ms Viewing Angles H = 178, V = 178 typ. Backlight Life 30,000 Hours (Min) Surface Treatment Anti-Glare Bezel Slim rientation Landscape Platform Processor ARM Cortex A73 dual-core 1.2GHz RAM 2GB DDR4 Storage 16GB Touch Type/ Tech IR Recognition Touch Resolution 32767 x 32767 Touch Point 20 points touch, 10 points writing INPUT HDMI 2.0 x3 (3840x2160 @60Hz) RGB / VGA x1 Audio x1 other peripherals as per technical specifications and as directed by engineer in charge. Estimated Cost (Inclusive of GST) |
Item Description SITC of lapel mic set Frequency Response : 50 to 15,000 Hz, Polar Pattern : Cardioid, Channels ? Upto 48 simultaneous Channels across all bands, Frequency Auto Scan Functionality, Range ? 300 ft, Maximum Output Level: -27 dBV (XLR, mic level),-13 dBV (1/4"), RF Sensitivity : -105 dBm for 12 dB SINAD, Image Rejection : >50 dB, typical, Audio Input Level : Max : -16dBV, Min : +10dBV, Gain Adjustment range : 26dB , Input Impedance - 1 M?, THD - <0.5%, Dynamic Range ? 100dB (A-weighted), RF Transmitter Output : 10 mW, Power Requirements : 2 X AA batteries, 1.5 V, alkaline , Battery Life : Should be more than 12 hours (alkaline) .Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-SHURE/SENNHEISER/BEYERDYNAMIC or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 20" Gooseneck Microphone with Audio frequency bandwidth:70 - 18000 Hz, Equivalent noise level:21 dB-A, Signal to Noise:73 dB-A, Electrical impedance:600 Ohm. (MAKES-SHURE/SENNHEISER/AKG or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of analog Premium ultra-low noise, high headroom mixer with 4 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps. 4 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound. Built-in stereo USB/Audio Interface to connect directly to your computer. Neo-classic "British" 3-band EQs for warm and musical sound. 2 aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for external FX devices. Control room/phones outputs with multi-input source matrix. (MAKES-ALLEN & HEATH /QSC/BEHRINGER or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 4 X 4 Digital Audio Matrix Processor: ADI SHARC 21489@450 MHz SIMD. DSP capability?400 MIPS; 1.6 GFLOPS. Applied with the software for managing the operation of all audio channels. Supports adaptive echo cancellation (AEC): 60dB/S convergence rate; 80dB echo cancellation level. Built-in automatic noise suppression (ANS): making the SNR increase 18db. Supports adaptive feedback control (AFC), automatic gain control (AGC)?auto-gain control -6dB~+18dB; auto-balance control -12dB~+12dB. Support ducker, ANC, AM, and Gate Mixer. Definable UI for managing and configurating the max. of 30 units. Centralized control: easily one click to control the power of A/V equipment and switch the audio source. USB audio for soft Audio conferencing.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-BIAMP/BXB/BOSE or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 2 channel network ampliifer Supply, Installation, testing and commissioning of Two channels 120W@8?<1% THD+N 120W@4?<1% THD+N 240W Bridged 70V/100V <1% THD+N. Adaptable with 4-8 Ohm loads. Bridged mode 240W output for 70V or 100V loudspeakers (direct drive). Power down after 15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby. LED at the front panel to indicate the current operation status. Frequency Response : 20Hz-20kHz, +/- 2dB@4? Load. Signal to Noise: >90dB@1W (20Hz-20kHz). Input Sensitivity: 1V (+2.2dBu)@Max Output 4?. Gain Value: 25db @ 4 Ohm.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-POWERSOFT/QSC/BXB or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of wall mount speaker with Rated input: 100V/ 15W, Sensitivity: 92dB Frequency response: 60~20KHZ, Speaker unit: Two-way (6.5? Woofer/ Tweeter), Box material: ABS cabinet.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-QSC/TWAUDIO/BXB or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of wireless handheld microphone, Frequency Response : 50 to 15,000 Hz, Polar Pattern : Cardioid, Channels ? Upto 48 simultaneous Channels across all bands,Frequency Auto Scan Functionality, Range ? 300 ft, Maximum Output Level: -27 dBV (XLR, mic level),-13 dBV (1/4"), RF Sensitivity : -105 dBm for 12 dB SINAD, Image Rejection : >50 dB, typical, Audio Input Level : -20dBV (@ 0dB), -10dBV (@ -10dB), Gain Adjustment range ? 10dB , THD - <0.5%, Dynamic Range ? 100dB (A-weighted), RF Transmitter Output : 10 mW, Power Requirements : 2 X AA batteries, 1.5 V, alkaline , Battery Life : Should be more than 12 hours (alkaline) e: 10 hours Approx.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (SHURE/SENNHEISER/BEYERDYNAMIC or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Control unit should have control minimum 9 chairman units & 500 delegate units by extension power supply. System should have to facility to PTZ control upto 12 or more cameras for look at me feature . It should have 128x64pixels digit LCD monitor display for configurations. The system should have auto testing facility when powered on. Support voting and GUI feature. Technical specification:- Frequency response : 50HZ~16KHZ( ±1dBV ) T.H.D. ? ?0.1% S/N Ratio ? ?85dBV AUX out: RCA jack balanced and AUX 1 input (RCA). 4 individual outputs specially for microphone units USB port (type A): audio recording and playback TCP / IP protocol control via wired or wireless network using a PC or mobile device. RS-232 , RS 485 port (D+, D --)and LAN Port for programming and controlling Conference microphone connection? CAT5E cable RJ-45 port x 4 sets Ethernet Technology: 10 MBPS Ethernet. OEM should be CE, FCC, Certified ..Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. ( Make-Televic/BXB/Brahler or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Table Top Chairman Unit should have a built-in DSP chip which can adjust the audio output and sensitivity automatically and support Cat5/6 cabling in flexible way through daisy-chain, ring, tree or star modes and with push to talk and priority speak button, pluggable gooseneck microphone easy to remove when not in use and with light ring for easy identification of the speaker. Gooseneck microphone Stem length: 48/56cm. Microphone should get auto off when not in use and also get auto activated when someone starts to speak. OEM should be CE and FCC, Certified . Technical Specification:- Frequency response : 100HZ~16KHZ Sensitivity : ?-50dB S/N ratio : ?70dB Auto Gain Control (AGC) -45 0dB Connections RJ-45 Jack x 2 .Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-Televic/BXB/Brahler or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Table Top Delegate Unit should have a built-in DSP chip which can adjust the audio output and sensitivity automatically and support Cat5/6 cabling in flexible way through daisy-chain, ring, tree or star modes and with push to talk button, pluggable gooseneck microphone easy to remove when not in use and with light ring for easy identification of the speaker.Gooseneck microphone Stem length: 48/56cm. Microphone should get auto off when not in use and also get auto activated when someone starts to speak. OEM should be CE and FCC, Certified . Technical Specification:- Frequency response : 100HZ~16KHZ Sensitivity : ?-50dB S/N ratio : ?70dB Auto Gain Control (AGC) -45 0dB Connections RJ-45 Jack x 2 . Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-Televic/BXB/Brahler or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 2.5 meters Cat6/Cat5e LAN-Patch, 8 x 0,14 mm2, RJ45 complete with standard accessories .Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-Televic/BXB/Brahler or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 4 ports of RJ45 connectors. Two screw holes for fixing on the table. Effectively decrease the length of using cables and increase the cabling flexibility.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-Televic/BXB/Brahler or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 10 meters Cat6/Cat5e LAN-Patch, 8 x 0,14 mm2, RJ45 complete with standard accessories .Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-Televic/BXB/Brahler or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of mixer amplifier with USB,mic, Aux and blutooth,Rated Power (at THD 10% 240 VAC,1kHz,4?)-300W,4?/8? & 70/100V,Signal to Noise ratio? 70 dB,Frequency Response-50-15,000 Hz ± 3dB,Tone Controls (Bass)-± 10 dB at 100 Hz,DC Power Supply Output Power ? 50% rated power (Make-CROWN/JBL/BXB or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Full HD PTZ Camera supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom with FoV of 72 degree and minimum 255 presets. Camera should support simultaneous outputs through IP, HDMI, USB 3.0 & 3G-SDI, Audio In and can be controlled via RS232/422 and IP. Panning angle -170° ~ +170° , Tilting angle -30° ~ +90. Camera should support SRT, PoE & should be compatible with Virtual USB Driver. OEM should be BIS, CE,RoHS & FCC Certified.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-PANASONIC/LUMENS/SONY or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of USB 3.1 Gen 1 Active Extender Cable. Connector USB Type A (male) to USB Type A (female). Data Rate 10 Gbps. Optical Fiber 850 nm VCSEL (multimode). Cable Diameter 4.5 mm. Supply Voltage 5V ± 0.25V. Flame Retardancy UL13. Compliance FCC-EMI, CE-EMC, RoHS, WEEE (Make-Lumens /Lindy/Kramer or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 4 x 4 USB 3.2 Gen 1 Industrial Hub Switch. Enables 4 computers to share 4 USB 3.2 Gen1 devices. Support port selection via remote controller or RS-422/RS-485 link through 5-pin terminal block. Supports DC 9-24V power input by terminal block. Supports USB BC 1.2 and over current protection. USB 3.2 Gen 1 compatibility with maximum data transfer rates up to 5 Gbps. (Make-ATEN/CYPRESS/BXB or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of HDMI to USB 3.0 video converter. Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output. simultaneously streaming the audio and video signal at 1080p to a USB connected PC for capture or re-broadcast. Automatically scales 4K sources to 1080p for USB capture. Video timing stabilization feature helps to ensure that the USB capture stream won?t lock up or drop, even if the HDMI input source is intermittent or becomes disconnected. Digital stereo audio from either HDMI (LPCM 2.0) or the 3.5mm analog audio input will be captured with the HDMI video source and is selectable within the configuration software. Inputs 1x HDMI, 1x 3.5mm, Outputs 1x HDMI. 1x USB Type-B.BidSpecific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-ATEN/CYPRESS/BXB or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of HDMI TX/RX extender set with ?3D, 4K×2K support, HDCP and DVI compliant Complies with the HDBaseT technology. Supports HDMI (including HDCP) over a single CAT5e/6 up to 60m. Full HD resolution support (1080p@60Hz/36-bit), 3D and 4Kx2K over 40m and PC resolution support (VGA to WUXGA) over CAT5e/6 cable. HDMI input up to 15m with 8-bit resolution or 10 m with 12-bit resolution. HDMI output up to 15 m with 8/12-bit resolution . Multiple control interfaces such as RS-232 with baud rate up to 115200/sec and IR. Supports HDCP repeater and CEC bypass. Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-Cypress /EXTRON/LIGHTWARE or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of hub that extends HDMI or VGA signals over a single Cat 5e/6/6a HDMI: 4K at distance up to 100 m, Supports Auto Switch ? automatically switches to a newly plugged-in source, Max. Data Rate 10.2Gbps (3.4Gbps per lane).Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-Cypress /EXTRON/LIGHTWARE or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of HDMI HDBaseT Receiver with Audio De-Embedding (4K@100m). Features HDMI audio de-embedding, capable of extracting audio signals to Coaxial or Stereo output separately.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (MAKES-Cypress /EXTRON/LIGHTWARE or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of table flush mount cable manager with 2 x universal Power socket, with Net, HDMI, VGA, 3.5mm. (Make-VAV/EXTRON/BESNET or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Eight HDMI inputs matrixed to eight HDMI outputs with HDMI 2.0a specification and 18Gbps (600MHz) 4K UHD support, HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) & 4096×2160@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to 1080p@60Hz. Eight Audio output ports can pair with eight HDMI outputs individually. Audio support Digital and analog Formats. Device should be provides an intuitive set of front panel controls with an LCD as well as RS-232, Telnet, WebGUI, and IR remote control options.Bid Specific ink signed MAF from the O.E.M(on OEM Letterhead) to be uploaded by the Bidder. (Make-Cypress /EXTRON/LIGHTWARE or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC ofRack 19" minimum 17U/600mm(W)/650mm(D) Alongwith Side Panels. Rack Consisting of the following accessories: Front Glass Door 17U, Rear Steel Door 17U Mesh, Castor Wheels with Front Brake (Set of 4 Nos), 2 Fan 90CFM 230VAC ( Top Mounted ), 19" Stationary Shelf 375mm(D), PDU 6 Points 6 Amp. Socket with MCB, Cable Manager 1U MS with PVC Loops, Hardware ( Pkt of 10 Nos). (MAKES-APW PRESIDENT/VALRACK/PRINET or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of customised podium with Institute logo, with gooseneck microphone (with on/off switch),HDMI port for laptop connectivity, minimum 21" touch monitor,USB port, Network point,i5 PC and minimum 2 nos electrical points . (Custom) Estimated Cost (Inclusive of GST) |
Item Description SITC of 1000Mbps 8 Port Gigabit Ethernet POE Switch,8 10/100/1000 Mbps Gigabit Ports. Auto MDI/MDIX Crossover for all ports. Store-and-forward Switching Scheme. Full/half-duplex for Ethernet/Fast. Ethernet Speeds. IEEE 802.3x Flow Control. Plug-and-play Installation. RoHS Compliant. IEEE 802.1p QoS (4 Queues, Strict Mode). (MAKES-Dlink/Netgear/TPLINK or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of New-generation IEEE 802.11ac Wave 2 wireless access point,High-speed 1750 Mbps throughput,WPA/WPA2 Personal/Enterprise encryption,64/128 bit WEP,MAC-based access filtering and WLAN partitioning,Captive Portal with industry-standard authentication ,VLAN support for network segmentation (MAKES-Dlink/Netgear/TPLINK or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Speaker Cables, Power cables, Audio Cables, HDMI cables & Connectors (MAKES-Falcon/MX/Aten or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC ofRack 19" minimum 22U/600mm(W)/650mm(D) Alongwith Side Panels. Rack Consisting of the following accessories: Front Glass Door 17U, Rear Steel Door 17U Mesh, Castor Wheels with Front Brake (Set of 4 Nos), 2 Fan 90CFM 230VAC ( Top Mounted ), 19" Stationary Shelf 375mm(D), PDU 6 Points 6 Amp. Socket with MCB, Cable Manager 1U MS with PVC Loops, Hardware ( Pkt of 10 Nos). (APW PRESIDENT/VALRACK/PRINET or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of i5 PC with 16GB RAM, 500 GB SSD with required software. For Soft VC and Operation. (Make-DELL/HP/LENOVO or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of 23.8-inch display with FHD (1920 X 1080) resolution. Connectivity: 2 HDMI (with H-Frequency: 30~83kHz / V-Frequency: 56~75Hz); D-Sub - 1, Headphone Out: 1 Contrast Ratio: 1000:1(Typ.) Response Time: 5 ms View angle: 178/178 with Anti glare 3H surface treatment. with Keyboard and Mouse. (Make-LG/ASUS/DELL or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Speaker Cables, Power cables, Audio Cables, HDMI cables & Connectors (Make-Falcon/MX/Aten or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC ofRack 19" minimum 9U/600mm(W)/650mm(D) Alongwith Side Panels. Rack Consisting of the following accessories: Front Glass Door 17U, Rear Steel Door 17U Mesh, Castor Wheels with Front Brake (Set of 4 Nos), 2 Fan 90CFM 230VAC ( Top Mounted ), 19" Stationary Shelf 375mm(D), PDU 6 Points 6 Amp. Socket with MCB, Cable Manager 1U MS with PVC Loops, Hardware ( Pkt of 10 Nos). (Make-APW PRESIDENT/VALRACK/PRINET or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description SITC of Speaker Cables, Power cables, Audio Cables, HDMI cables & Connectors Estimated Cost (Inclusive of GST) |
Item Description Supplying, Installing, Testing, Commissioning of 2.0 TR inverter AC including appropriate stabilizer complete setup of Make- (Daikin/Carrier/Hitachi/Voltas or equivalent as per direction of engineer incharge) all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Supplying, Installing, Testing, Commissioning of 1.5 TR inverter AC including appropriate stabilizer complete setup of Make- (Daikin/Carrier/Hitachi/Voltas or equivalent as per direction of engineer incharge) all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Supplying & fitting of Drain with PVC rigid including required fitting and support all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Supplying & fitting of powder coated iron structure for placement of outdoor unit all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Supply installation,testing commissiong of Ceiling Suspended Air-cooled Ductable Split Airconditioning Unit comprising of Imported Scroll compressors, multi row deep DX Cooling coil, air-cooled condenser, Microprocessor based control panel, etc. of following capacity each With Eco Friendly R 410 Gas & outdoor stand. Capacity - 11.0 TR Estimated Cost (Inclusive of GST) |
Item Description Supply installation,testing commissiong of Ceiling Suspended Air-cooled Ductable Split Airconditioning Unit comprising of Imported Scroll compressors, multi row deep DX Cooling coil, air-cooled condenser, Microprocessor based control panel, etc. of following capacity each With Eco Friendly R 410 Gas & outdoor stand. Capacity - 8.5 TR Estimated Cost (Inclusive of GST) |
Item Description Supply installation,testing commissiong of Ceiling Suspended Air-cooled Ductable Split Airconditioning Unit comprising of Imported Scroll compressors, multi row deep DX Cooling coil, air-cooled condenser, Microprocessor based control panel, etc. of following capacity each With Eco Friendly R 410 Gas & outdoor stand. Capacity - 5.5 TR Estimated Cost (Inclusive of GST) |
Item Description Corded Remotes Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for transmission Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for remotes Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 12.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.63 MM (24 gauge) Galvanized Sheet Steel Ducting Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.80 MM (22 gauge) Galvanized Sheet Steel Ducting Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.63 MM (24 gauge) Galvanized Sheet Steel Ducting Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.80 MM (22 gauge) Galvanized Sheet Steel Ducting Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Estimated Cost (Inclusive of GST) |
Item Description Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications. Estimated Cost (Inclusive of GST) |
Item Description Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers as per specifications. Estimated Cost (Inclusive of GST) |
Item Description Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. Estimated Cost (Inclusive of GST) |
Item Description Supplying, fixing testing commissioning of Return air/ Exhaust diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. Estimated Cost (Inclusive of GST) |
Item Description Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Fire damper Estimated Cost (Inclusive of GST) |
Item Description Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Actuator Estimated Cost (Inclusive of GST) |
Item Description Supplying, fixing acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 Kg/M3, with 25 mm x 25 mm GI section of 1.25 mm thick at 600 mm centre to centre covering with rienforced plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound complete as required and as per specification. Estimated Cost (Inclusive of GST) |
Item Description Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class?O?) insulation on existing duct after applying Suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 19 mm thick (In Condition Space) Estimated Cost (Inclusive of GST) |
Item Description Supply, installation and balancing of extruded aluminium powder coated air louvers complete with aluminium wire mesh birdscreen & volume conrtol dampers as per specifications. Fresh air louvers Estimated Cost (Inclusive of GST) |
Item Description Supply, installation and balancing of extruded aluminium powder coated air louvers complete with aluminium wire mesh birdscreen & volume conrtol dampers as per specifications. Exhaust air louvers(without volume control dampers) Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation & Testing of 125mm deep Antivibration Flexible Joints made out of imported fire retardant fabric with extruded aluminium frame/ flange on both sides of approved make. For Inline fan /Axial Fan/AHU or equivalent as per direction of engineer incharge. Estimated Cost (Inclusive of GST) |
Item Description Design, manufacture, supply, installation, testing, commissioning, approvals (statutory or otherwise) and handing over in satisfactory working conditions of Elevators with directional collective control for cars (as required) with AC VVVF control with automatic rescue device (ARD) and with, automatic centre opening car door SS finished, vine flooring including the cost of providing 4 weeks satisfactory trial operation and testing at 100% of design load and ALL safety checks including simulation tests of over load, over shoot, over speed, sudden breaks, emergency calls, fire man's switch operation etc. and each elevator to be programmed for jerkless operation and including providing free comprehensive maintenance service for 12 months after final virtual completion and satisfactory handing over as DLP, complete as per specifications as required and as below: 1. Capacity (kgs)-1088 Kgs, 2.Passenger -16 Nos., 3.Contract Speed (m/s)-1.5 M/S, 4.Machine-PM Gearless (Located above shaft), 5.Machine Location-Machine Room Less, 6.Operational Control-Duplex Selective Collective. Microprocessor-Based system, 7. Motor Control-AC Variable Voltage Variable Frequency, Microprocessor Based with Digital Closed Loop Feedback. 8. Power Characteristics-400/415 Volts (3 Phase AC) 9. Stops-10 Stops With (all opening on the same side) 10.TRACTION MEDIA- Flat Coated Steel Belt, 11.FALSE CEILING TYPE-Stainless Steel #4(Hairline), 12.Travel height-32.8 Mtrs. (approx.), 13.HOISTWAY DIMENSIONS (W x D ? mm)- 2180 mm W x 2400 mm D, 14-CAR DIMENSIONS (W x D x H - mm)- 1300 mm W x 2000 mm D x 2300 mm D, 15. DOOR OPENING (W x H - mm)-900 (W) × 2100 (H), 16-Door Fire Rating-Fire rating-60mins, 17.Door Operation-High Speed, Heavy-Duty Door Operator. Adjustable Door Speed. Centre Opening Door. Minimum opening speed 2-1/2 FPS. 18.CAR DOOR FINISH-Stainless Steel #4(Hairline), 19.Guide Rails-High Strength Steel Class-A / Planed Steel Tees, 20. FLOORING-Vinyl Tiles, 21.Compensation-Provider's standard application, 22.CAR FINISH-Rear Mid Panel = Stainless Steel #4(Hairline), Rear Corner Panels = Stainless Steel #4(Hairline), Side Mid Panels = Stainless Steel #4(Hairline), Side Corner Panels = Stainless Steel #4(Hairline), Front Panels = Stainless Steel #4(Hairline) 23.Signal Fixtures-Provider's Premium Design. 24.HAND RAILS-Stainless Steel Mirror Finish Handrails on rear car panels, 25.LANDING DOORS FINISH-Stainless Steel #4(Hairline) 26.CAR POSITION INDICATOR-Monochrome LCD-Blue Background & White font 27.PIT DEPTH-1600mm, Note: (a) BMS Compatible Power / Control panel for the above Lifts (b) Power and Control cabling for the above lifts (c) Necessary scaffolding for execution to be arranged by lift vendor. (d) Control cabling and panel shall be including with lift items. (e) Power for testing and commissioning shall be provided by owner / client at one point on chargeable basis for the distribution will be in contractor scope. Estimated Cost (Inclusive of GST) |
Item Description The Product should be SEFA certified Chemistry Lab: Island Table with 4 Storages & 2 Sink of size 4800mm L x 750mm W x 900mm H (Godrej, Haworth, BP ERGO LTD. or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description The Product should be SEFA certified Chemistry Lab: Island Table with 5 Storages & 2 Sink of size 6000mm L x 1200mm W x 900mm H (Godrej, Haworth, BP ERGO LTD. or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description The Product should be SEFA certified Chemistry Lab: Island Table with 3 Storages & 1 Sink of size 3600mm L x 1200mm W x 900mm H (Godrej, Haworth, BP ERGO LTD. or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description BIG LAB- High Adjustable Revolving Stool with Back- SEAT ASSEMBLY: The seat is made up of 1.2+0.1cm thick flat plywood measured as per QA method described in OCP-QLTA-P14-18 and with moulded Polyurethane foam and are-upholstered with replaceable synthetic leather covers SEATSIZE: Diameter 40.0 cm, ADJUSTMENTS: 360° Revolving type BACK. ASSEMBLY The back foam is designed with contoured: Lumbar support for extra comfort. The upholstery is available in synthetic leather *BACK SIZE: 45.0 cm (W) covered with polyurethane foam, _.-HIGH-RESILIENCE (HR).POLYURETHANE FOAM:.The . HRpolyurethanefoam is.moulded with density =:45 +/-2 kg/m* and Hardness load 16 + 2 kgf as per 1S:7888 for 25% compression., HEIGHT ADJUSTMENT: The manual height adjustment is very easy to operate with a help of a knob. It can be easily locked at the most comfortable position., TWIN WHEEL CASTORS: Thetwin wheel castors are injection moulded in Black Nylon. PEDESTAL ASSEMBLY The five-prong pedestal is fabricated from 0.2 + 0.02.cm thick HR sheet (1S : DD 1079/ HR ), powder coated ( DFT 40-60 microns) andfitted with an injection moulded black Polypropylene Hub Cap and 5 nos.twin wheelcastors. The pedestal-is-55.0+/-0.5em-pitch-circle-diameter.(65.0£1.0cm-with-castors).-Circular-foot-ring.of. - @52:0+0.2cm made up of @1.9+0.2 x 0.12+0.0096cm thk MS ERW Tubefor foot support in High-base stool. Overall Size 65 W x 65 D x 88-99.5 H x 67-78.5 sh cm (Godrej, Haworth , BPERGO LTD. or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying & Installing of 3 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges. Dimension-1500 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thick powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI or equivalent as per direction of engineer incharge) as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description Supplying & Installing of 2 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This two seater model is best suited for schools and colleges. Dimension-900 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thick Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI or equivalent as per direction of engineer incharge) as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description CLASS ROOM+LAB +INCHARGE ROOM-Supplying & Installing of Table Model T-8 Made of made of MS ERW round tube dia 25.4 x 1.2mm thick with 25mm thick Pre Laminated top size 4' x 2' with one side three drawer unt made of .5mm thick CIRCA sheet mild steel, All steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI or equivalent as per direction of engineer incharge) as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description TUTORIAL ROOM-Supplying & Installing of Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 25 mm thick Pre4 Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN or equivalent as per direction of engineer incharge) as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description CLASS ROOM+TUTORIAL ROOM+LABS-upplying & Installing of Dry - erase markers and easily cleaned Green / White Board of size 122 cm x 122 cm x 5 cm fixed on wall at proper height with clip, bracket & screws / toggle bolt. Estimated Cost (Inclusive of GST) |
Item Description TEACHER CHAIR+LAB+ INCHARGE ROOM-Supplying & Installing of Chair with Cushion chair on tubular frame with arm cantilever type made of dia 2.5cm X 14BG MS ERW round Tube with black powder coated paint and Back made of chemically treated and seasoned wood, caned and furnished with melamine polish. Seat height 43cm, back height 80 cm (Make-Godrej /Durian/Zuari/Methodex or equivalent as per direction of engineer incharge) as per direction of E/I Estimated Cost (Inclusive of GST) |
Item Description LAB STORE-Supplying & Installing of Steel Storwel Plain with Four Shelves Almirah of size 1980 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 weldipg. Anticorrosion treated components, oven baked powder coatinq process. Material thickness 0 9mm Top, Bottom.LH & RH sides and back material thickness - 0.9 mm, removable RH & LH main door with stiffeners materials thickness - 0.9 mm, 4 adjustable shelves of thickness - 0.8 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI or equivalent as per direction of engineer incharge) as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Sum(Estimated Cost (Inclusive of GST)): () |