Item Description Providing & Fixing chicken wire mesh of 22 gauge in junction of RCC and Brick work walls for internal Works fixed with U nails @ 150 mm c/c including scaffolding etc complete as per direction of Engineer-in-charge. Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing glass reinforced concrete (GRC) customized jali 50mm thick on Aluminium Frame work (Tubular section of size as required). Approximate size of Jali 1100 mm x 1800mm). Basic Rate of jali 4200 Rs./SqM excluding taxes, freight and loading & unloading Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing white vitreous china wash basin under counter basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required. Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing & commissioning of Solar Water Heating System of 5 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm, Laser welded . with necessary Stands, Support etc. with 500 Ltrs capacity SS -304 hot water storage tank of thickness 4 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with suitable Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved) Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing hand held ablution fitting (health faucet) with 1.2 meter long flexible tube and wall hook, all complete approved engineer-in-charge Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length CP brass extension pipe all of approved engineer-in-charge Estimated Cost (Inclusive of GST) |
Item Description Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly valve, motorized valve controller with complete in all respect. (a) upto 50 mm dia. nominal bore Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. (a) 150 mm diameter Estimated Cost (Inclusive of GST) |
Item Description Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. (b) 200 mm diameter Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing S.S grating of approved quality and colour. Circular type 125 mm nominal dia. Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 80 mm dia Estimated Cost (Inclusive of GST) |
Item Description Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 150 mm dia Estimated Cost (Inclusive of GST) |
Item Description Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm. Estimated Cost (Inclusive of GST) |
Item Description Supply, installation and fixing of MS Axe of approved by St.John Ambulance Brigade /Indian Red Cross society or equivalent as per direction of engineer incharge conforming to IS : 2217 - 1963 all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Doors and frame - Supply, installation and fixing of MS door frame 1200x2100 door capable of accommodating fire hose reel, landing valve, hose pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) Cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making 1200x600x2100 Recessed type mansoary box all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below: 4 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder of Make :- ABC/Eco Fire or equivalent all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below: 6 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder of Make :- ABC/Eco Fire or equivalent all complete job as per direction of E/I. Estimated Cost (Inclusive of GST) |
Item Description Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) Primary point controlled by one MCB. Estimated Cost (Inclusive of GST) |
Item Description Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, testing and commissioning of 5W LED mirror light shall be 6500K. equivalent as specified in the approved list of make.) Estimated Cost (Inclusive of GST) |
Item Description Supply, Installation, Testing and Commissioning of 10W Surface mounted LED Bracket (Make-Bajaj Lighting or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description MAIN LT PANEL-Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 55 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks with sleeved TPN Aluminum Bus bars and GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade (RAL 7032) over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. This main panel must be extendable for future requirement in such a manner not to disrupt ongoing services at the point of use during extension. All LT Panel shall conform to latest IS/IEC -61439 code. All Panel shall be complete with power & control wiring, danger & inscription plate, Lifting hooks etc. Each incoming / outgoing breaker shall have microprocessor release with adjustable over current, short circuit & earth fault protection with instantaneous as mentioned in specification. The Panel will be made as per detailed specifications & drawings forming part of this document. Fault level of panel shall be 50 KA. All the MCCB with adustable overload, short circuit & earth fault protection and above shall have microprocessor. The panel shall be manufactured as per BOQ, tech specification and drawing. (Note:The contractor may select the next higher fault rating of ACB/ MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maxmum fault level of the panel.) NOTE: PANEL MUST BE AS PER IEC 61439 TYPE TESTED FROM ANY INDIA BASED TEST LABORATORY (CPRI/ERDA ETC) FOR ROTECTION AGAINST SHORT CIRCUIT/TEMPERATURE RISE/INTERNAL ARC/DEGREE OF PROTECTION) (PTTA PANEL UPTO 630A & TTA PANEL ABOVE 630A) Estimated Cost (Inclusive of GST) |
Item Description 5 KVA UPS 1 phase (240 V + 15%) Volts input & 1 phase output (240 V + 1%), 50 Hz, IGBT based technology, Input harmonic Current THD <=3% typical at 100% load, ,<=6% maximum at 100% load with inbuilt Isolation Transformer and 30 min battery backup for each UPS along with battery cabinet, Parallel card, BMS Port & communication card complete in all respect including supporting steel structure for UPS and Battery as required.Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to batteries etc complete in all respect and as per direction of Engineer in Charge. Estimated Cost (Inclusive of GST) |
Item Description Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561. Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 25 sq.mm. (28mm) Estimated Cost (Inclusive of GST) |
Item Description Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required. 3.5C x 150 sq.mm. (50mm) Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Trays-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required..150 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description S/ F powder coated of approved shade MS Cable Tray Bends- Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness Estimated Cost (Inclusive of GST) |
Item Description Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required. 10 Pair Cable As per Estimated Cost (Inclusive of GST) |
Item Description Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required. 2 Pair Estimated Cost (Inclusive of GST) |
Item Description SITC of Analog telephone instrument with CLI facilities, flash, redial . Estimated Cost (Inclusive of GST) |
Item Description Supply, installation, testing and commissioning of following krone type tag blocks enclosed in MS enclosure of suitable size with lockable cover.10 Pair MDF. Estimated Cost (Inclusive of GST) |
Item Description Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing and commissioning of Bollard light fitting suitable for 10 watt IP 65LED having system lumen output of minimum 900 lumens complete with all accessories and lamp. Wipro Cat No.: LB14-131-XXX-65-05 or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Supplying, installation, testing and commissioning of 70W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly & modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 6500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller & Intelligent control module/sensor with higher reliability, long service life, suitable for easy & quick installation. Wipro Cat No.:LR 14-591-XXX-65-XX. or equivalent as per direction of engineer incharge) Estimated Cost (Inclusive of GST) |
Item Description Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB?s and terminal block. Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete. Estimated Cost (Inclusive of GST) |
Item Description Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete. Estimated Cost (Inclusive of GST) |
Sum(Estimated Cost (Inclusive of GST)): () |