Tender Document

General Information

Template Group	ITEM RATE AND PERCENTAGE BOQ V1.6
Bid Parts	2	Category	PERCENTAGE
Tender Creator	Mr Om Prakash (CHIEF ENGINEER)	Organization Hierarchy	Government of Bihar->Bihar State Educational Infrastructure Development Corporation Limited->Bihar State Educational Infrastructure Development Corporation Limited, HQ
System Tender No.	63134	Tender Reference No.	NIT-78/2023-24/1
Procurement Category	CIVIL	Tender Currency	INR
Bidding Currency	INR
Tender Type	Open Tender	Estimated Value Visibility Flag	N
Minimum Number Of Bids	2
Ranking Sequence	L1 Ranking	Offer Validity(In Days)	120
Tender Issuing Authority	Om Prakash (Chief Engineer)	Tender Approving Authority	Om Prakash (Chief Engineer)
Detailed Description	Construction of Academic Building, Administrative Building, Indoor Games Complex with Cafetaria, Boundary Wall, Campus Development & other works at new campus of Patliputra University, Bakhtiyarpur, Patna
NIT	Construction of Academic Building, Administrative Building, Indoor Games Complex with Cafetaria, Boundary Wall, Campus Development & other works at new campus of Patliputra University, Bakhtiyarpur, Patna

Bid Part Template	Bid Part Number	Scheduled Open Date

Date Schedule

32626	101	100	1522	2522	3916	rfqdate	Fixed_rfqdate_dataset	RFQ DATE	538	538	A		3724	1584609918000	3724	1584610071000	1	1	19485	0	Y	1	N	Date Schedule	0			990019	0	0	0	0	false	false	Y	false

Bid Submission Start Date	25-06-2024 06:00 PM
Bid Submission Due Date	03-07-2024 03:00 PM
Bid Open Date	05-07-2024 03:30 PM
Physical doc Submission End Date as allowed in the tender document	04-07-2024 03:00 PM

Pre-bid Discussion

32634	101	100	1522	2522	3919	prebiddiscussion	Pre Bid Discussion	Pre Bid Discussion	538	538	A		3724	1584609918000	3724	1584610072000	1	1	19489	0	Y	2	N	Pre-bid Discussion	0			990020	0	0	0	0	false	false	Y	false

Pre-Bid Discussion Type	OFFLINE
Pre-Bid Meeting Start Date	28-06-2024 03:00 PM
Pre-Bid Meeting End Date	28-06-2024 03:30 PM
Venue Details	CE Office, BSEIDC, Patna
Remarks

Payment

Payment Type	Amount	Payment Mode	Payment Currency	Exemption Allowed/Disallowed
EMD	22287000	Internet Payment Gateway(IPG),Challan\|Bank Guarantee	INR	N
Tender Fee	10000	Internet Payment Gateway(IPG),Challan\|	INR	N
Tender Processing Fee	5900	Internet Payment Gateway(IPG),Challan\|	INR	N

GENERAL PARTICULARS

Description
Bid Security Amount in Rupees (A) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given. 16.1 Total Bid Security Amount in Rupees Rs. 22287000.00 IFB
(i) Legal Status of Bidder 4.3(a)
(ii) Place of Registration.
(iii) write Principal place of Business
(iv) Power of attorney of signatory
4.5.A To qualify for award of the contract, each bidder in its name should have in the last five yearsas referred to in Appendix :-
4.5.A(a) Total value of civil engineering construction work, in Rupees, Performed in last five years - Achieved in any one year a minimum annual financial turnover (in all classes of civil engineering construction works only) volume of construction work of at least the amount equal to the 50 % (fifty percent) estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year - Rs. 1064319000.00 (2019-20, 2020-21, 2021-22, 2022-23, 2023-24)
4.5.A(b) The contracting Firm/Agency should have satisfactorily completed as a Prime contractor during the last five years, Three similar works (Building) each costing not less than 40% (forty percent) of the BOQ Amount or completed two similar works (Building) each costing not less than 60% (sixty percent) of the BOQ Amount or completed one similar work (Building) costing not less than 80% (eighty percent) of the BOQ Amount (Escalataion factor applicable as per Sr. No. 19 of Appendix to ITB).
Similar works (Building) means :- Constructing of Educational/Institutional/Residential/Medical/Dental College building more than 15 mtr height on completion basis i.e. civil work with associated MEP services like PHE & Electrical for Central/State government/PSU.
(a) Contractors/Firm's should have completed 3 similar works (Building) costing not less than 40% of BOQ Amount. i.e. Rs.851455000.00
OR,
(b) Contractors/Firm's should have completed 2 similar works (Building) costing not less than 60% of BOQ Amount. i.e. Rs.1277182000.00
OR,
(C) Contractors/Firm's should have completed 1 similar works (Building) costing not less than 80% of BOQ Amount i.e.Rs. 1702910000.00
4.5A(c) Executed in any one year, the minimum quantities /amount of the following items of work (units shall be same as in Requirement column).
i) PCC / RCC 17115.0 M3
ii) Brick work 11091.0 M3
iii) Flooring 19098.0 M2
4.5A(e) PHE work Rs 15192000.00
4.5A(d) Electrical work Rs 42653000.00
Fire Fighting Rs 4976000.00
Furniture Rs 80742000.00
ITB 4.7 Amount of Existing commitments and ongoing works in Rupees
ITB 4.7 Amount of Work for which Bid already submitted, in Rupees
4.5(B) (a) Numbers and Maximum age of Equipment with bidder / Type of Equipment Nos. Max. Age
Concrete Batching & Mixing plant Minimum capacity 15m3/hr - 2 Nos, Maximum age - 5Y
Pump for concreting 2 Nos , Maximum age - 5Y
Transit Mixture 2 Nos , Maximum age - 5Y
Vibrator (Plate & Niddle) - 8 Nos, Maximum age - 5Y
Water Tanker 4 Nos, Maximum age - 5Y
Steel shuttering 20000sft, Maximum age - 5Y
4.5(B) (b) Name of the Personnel and Experience in years and Select from drop down list Personnel / Qualification
1. Project Manager B.E. Civil + 10 Years Exp. (5 years as Manager having MBA) or retired E.E. - 1 No.
2. Site Engineer B.E. (Civil) + 07 Years Exp. (3 years in Building Construction) or retired A.E. - 5 Nos
3. Plant Engineer B.E. Mech./ Civil + 05 Years Exp. or Dip. Mech + 07 Years Exp. or Retired J.E. - 2 Nos.
4. Quantity Surveyor B.E. Civil + 05 Years Exp. or Dip. Civil + 07 Years Exp. - 2 Nos.
5. Soil & Material Engineer - B.E. Civil + 07 Years Exp.. - 2 Nos.
6. Site Supervisor - Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. or retired I.T.I Holder. - 5 Nos.
ITB 4.7 Bid Capacity of Rs. 2128637140/-
4.2(i) Evidence of accesses to Financial Resources in Rupees Evidence of access to or availability of credit facilities (10% of estimated cost i.e. Rs. 212864000/-), certified by bankers (for work under this bid).
4.3(l) Proposed methodology and program of construction Select From drop down list the proposed methodology and program of construction, backed with equipment planning and deployment
4.3(j) Litigation History. Select from drop down list. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not)
Affidavit Select as indicated in page no 32 of SBD document, regarding statements made in the required attachments are true and correct.
4.3(h) Undertaking towards able to invest a minimum of cost up to 25% of contract value of work. During implementation of contract. Sec-2, Undertaking
Registration No. IT.& GST Registration & clearance Certificate Labor License Character Certificate NOC for Debar (If required)
Electrical Licence (Self registrataion / Sub-contractor registration with affidavit)
Licence for water supply/sanitary engineering works (Self registrataion / Sub-contractor registration with affidavit)
The OEM of the Furniture products with the following certificates :-
(a) Valid ISO: 9001 issued from NABCB Govt of India Accredited agencies only.
(b) Valid BIFMA Membership
( c) Green guard certification
(d) AIOTA Certificate
(e) Laboratory Test Certificate of all Product to be supplied

Description Bid Security Amount in Rupees (A) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given. 16.1 Total Bid Security Amount in Rupees Rs. 22287000.00 IFB
Description (i) Legal Status of Bidder 4.3(a)
Description (ii) Place of Registration.
Description (iii) write Principal place of Business
Description (iv) Power of attorney of signatory
Description 4.5.A To qualify for award of the contract, each bidder in its name should have in the last five yearsas referred to in Appendix :-
Description 4.5.A(a) Total value of civil engineering construction work, in Rupees, Performed in last five years - Achieved in any one year a minimum annual financial turnover (in all classes of civil engineering construction works only) volume of construction work of at least the amount equal to the 50 % (fifty percent) estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year - Rs. 1064319000.00 (2019-20, 2020-21, 2021-22, 2022-23, 2023-24)
Description 4.5.A(b) The contracting Firm/Agency should have satisfactorily completed as a Prime contractor during the last five years, Three similar works (Building) each costing not less than 40% (forty percent) of the BOQ Amount or completed two similar works (Building) each costing not less than 60% (sixty percent) of the BOQ Amount or completed one similar work (Building) costing not less than 80% (eighty percent) of the BOQ Amount (Escalataion factor applicable as per Sr. No. 19 of Appendix to ITB).
Description Similar works (Building) means :- Constructing of Educational/Institutional/Residential/Medical/Dental College building more than 15 mtr height on completion basis i.e. civil work with associated MEP services like PHE & Electrical for Central/State government/PSU.
Description (a) Contractors/Firm's should have completed 3 similar works (Building) costing not less than 40% of BOQ Amount. i.e. Rs.851455000.00
Description OR,
Description (b) Contractors/Firm's should have completed 2 similar works (Building) costing not less than 60% of BOQ Amount. i.e. Rs.1277182000.00
Description OR,
Description (C) Contractors/Firm's should have completed 1 similar works (Building) costing not less than 80% of BOQ Amount i.e.Rs. 1702910000.00
Description 4.5A(c) Executed in any one year, the minimum quantities /amount of the following items of work (units shall be same as in Requirement column).
Description i) PCC / RCC 17115.0 M3
Description ii) Brick work 11091.0 M3
Description iii) Flooring 19098.0 M2
Description 4.5A(e) PHE work Rs 15192000.00
Description 4.5A(d) Electrical work Rs 42653000.00
Description Fire Fighting Rs 4976000.00
Description Furniture Rs 80742000.00
Description ITB 4.7 Amount of Existing commitments and ongoing works in Rupees
Description ITB 4.7 Amount of Work for which Bid already submitted, in Rupees
Description 4.5(B) (a) Numbers and Maximum age of Equipment with bidder / Type of Equipment Nos. Max. Age
Description Concrete Batching & Mixing plant Minimum capacity 15m3/hr - 2 Nos, Maximum age - 5Y
Description Pump for concreting 2 Nos , Maximum age - 5Y
Description Transit Mixture 2 Nos , Maximum age - 5Y
Description Vibrator (Plate & Niddle) - 8 Nos, Maximum age - 5Y
Description Water Tanker 4 Nos, Maximum age - 5Y
Description Steel shuttering 20000sft, Maximum age - 5Y
Description 4.5(B) (b) Name of the Personnel and Experience in years and Select from drop down list Personnel / Qualification
Description 1. Project Manager B.E. Civil + 10 Years Exp. (5 years as Manager having MBA) or retired E.E. - 1 No.
Description 2. Site Engineer B.E. (Civil) + 07 Years Exp. (3 years in Building Construction) or retired A.E. - 5 Nos
Description 3. Plant Engineer B.E. Mech./ Civil + 05 Years Exp. or Dip. Mech + 07 Years Exp. or Retired J.E. - 2 Nos.
Description 4. Quantity Surveyor B.E. Civil + 05 Years Exp. or Dip. Civil + 07 Years Exp. - 2 Nos.
Description 5. Soil & Material Engineer - B.E. Civil + 07 Years Exp.. - 2 Nos.
Description 6. Site Supervisor - Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. or retired I.T.I Holder. - 5 Nos.
Description ITB 4.7 Bid Capacity of Rs. 2128637140/-
Description 4.2(i) Evidence of accesses to Financial Resources in Rupees Evidence of access to or availability of credit facilities (10% of estimated cost i.e. Rs. 212864000/-), certified by bankers (for work under this bid).
Description 4.3(l) Proposed methodology and program of construction Select From drop down list the proposed methodology and program of construction, backed with equipment planning and deployment
Description 4.3(j) Litigation History. Select from drop down list. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not)
Description Affidavit Select as indicated in page no 32 of SBD document, regarding statements made in the required attachments are true and correct.
Description 4.3(h) Undertaking towards able to invest a minimum of cost up to 25% of contract value of work. During implementation of contract. Sec-2, Undertaking
Description Registration No. IT.& GST Registration & clearance Certificate Labor License Character Certificate NOC for Debar (If required)
Description Electrical Licence (Self registrataion / Sub-contractor registration with affidavit)
Description Licence for water supply/sanitary engineering works (Self registrataion / Sub-contractor registration with affidavit)
Description The OEM of the Furniture products with the following certificates :-
Description (a) Valid ISO: 9001 issued from NABCB Govt of India Accredited agencies only.
Description (b) Valid BIFMA Membership
Description ( c) Green guard certification
Description (d) AIOTA Certificate
Description (e) Laboratory Test Certificate of all Product to be supplied

Terms and Conditions

Clause No.	Specification	Attachment
1	Accept terms and conditions as per NIT	NIT-78 of 2023-24.pdf

Attachments

Label	File Name	Attach File
NIT-78	NIT-78 of 2023-24.pdf	NIT-78 of 2023-24.pdf
Corrigendum No.-1	Corrigendum No.-1 NIT-78 2023-24.pdf	Corrigendum No.-1 NIT-78 2023-24.pdf
Notice-1	Liability-registration-manual-73.pdf	Liability-registration-manual-73.pdf
Notice-2	OfficeOrder- 240.pdf	OfficeOrder- 240.pdf
SBD	SBD2023NIT78SL01.docx	SBD2023NIT78SL01.docx
BOQ	BOQ 01.xlsx	BOQ 01.xlsx

Required Attachment from Bidder

Supporting Document	Mandatory	Attachement Group	Evaluation Type
EXISTING COMMITMENTS	Y	Others	BidPart1
AFFIDAVIT	Y	Others	BidPart1
EMD(BANK GUARANTEE for offline mode) / ONLINE RECEPT	Y	Others	BidPart1
CHARACTER CERTIFICATE ISSUED BY SP	Y	Others	BidPart1
GST REGISTRATION	Y	Others	BidPart1
GST RETURN OF PREVIOUS MONTH	Y	Others	BidPart1
PAN NO	Y	Others	BidPart1
Registration Certificate	Y	Others	BidPart1
LEGAL STATUS OF BIDDER	Y	Others	BidPart1
POWER OF ATTORNEY	Y	Others	BidPart1
LAST 05 YEARS ANNUAL TURN OVER	Y	Others	BidPart1
EXPERIENCE OF SIMILAR NATURE OF WORKS	Y	Others	BidPart1
AMOUNT OF EXISTING COMMITMENTS AND ON GOING WORKS	Y	Others	BidPart1
AMOUNT OF WORK FOR ALREADY SUBMITTED	Y	Others	BidPart1
BIDDING CAPACITY (BC-AxNx3-B)	Y	Others	BidPart1
KEY PERSONNEL	Y	Others	BidPart1
BANKERS CERTIFICATE FOR EVIDENCE OF ACCESS TO OR AVAILABILITY OF CREDIT FACILITIES	Y	Others	BidPart1
UNDERTAKING	Y	Others	BidPart1
LITIGATION HISTORY	Y	Others	BidPart1
NOC FOR DEBAR	Y	Others	BidPart1
PROGRAMME OF CONSTRUCTION	Y	Others	BidPart1
ELECTRICAL REGISTARTION	Y	Others	BidPart1
The OEM of the Furniture products with the following certificates :-	Y	Others	BidPart1
(a) Valid ISO: 9001 issued from NABCB Govt of India Accredited agencies only.	Y	Others	BidPart1
(b) Valid BIFMA Membership	Y	Others	BidPart1
( c) Green guard certification	Y	Others	BidPart1
(d) AIOTA Certificate	Y	Others	BidPart1
(e) Laboratory Test Certificate of all Product to be supplied	Y	Others	BidPart1
Any Other		Others	BidPart1

Supporting Document EXISTING COMMITMENTS Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document AFFIDAVIT Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document EMD(BANK GUARANTEE for offline mode) / ONLINE RECEPT Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document CHARACTER CERTIFICATE ISSUED BY SP Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document GST REGISTRATION Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document GST RETURN OF PREVIOUS MONTH Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document PAN NO Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document Registration Certificate Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document LEGAL STATUS OF BIDDER Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document POWER OF ATTORNEY Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document LAST 05 YEARS ANNUAL TURN OVER Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document EXPERIENCE OF SIMILAR NATURE OF WORKS Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document AMOUNT OF EXISTING COMMITMENTS AND ON GOING WORKS Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document AMOUNT OF WORK FOR ALREADY SUBMITTED Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document BIDDING CAPACITY (BC-AxNx3-B) Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document KEY PERSONNEL Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document BANKERS CERTIFICATE FOR EVIDENCE OF ACCESS TO OR AVAILABILITY OF CREDIT FACILITIES Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document UNDERTAKING Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document LITIGATION HISTORY Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document NOC FOR DEBAR Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document PROGRAMME OF CONSTRUCTION Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document ELECTRICAL REGISTARTION Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document The OEM of the Furniture products with the following certificates :- Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document (a) Valid ISO: 9001 issued from NABCB Govt of India Accredited agencies only. Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document (b) Valid BIFMA Membership Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document ( c) Green guard certification Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document (d) AIOTA Certificate Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document (e) Laboratory Test Certificate of all Product to be supplied Mandatory Y Allow Exemption Attachement Group Others Evaluation Type BidPart1
Supporting Document Any Other Mandatory Allow Exemption Attachement Group Others Evaluation Type BidPart1

BOQ

Work Ref No	Name of the Work	UOM	QUANTITY	Rate	GST (%)	GST Value	Estimated Cost (Inclusive of GST)	Attachment	Mandatory Item
1	Construction of Academic Building, Administrative Building, Indoor Games Complex with Cafetaria, Boundary Wall, Campus Development & other works at new campus of Patliputra University, Bakhtiyarpur, Patna	Work	1	1766221409	0	0	1766221409	BOQ 01.xlsx	Yes
							SUM: 1766221409 One hundred and seventy-six crore sixty-two lakh twenty-one thousand four hundred and nine

RFQ Item

Item Code	Item Description	UOM	QUANTITY	GST Value	Estimated Cost (Inclusive of GST)	Mandatory Item
1	415V LT DG SET Supply, Installation, testing & Commissioning of 500 KVA Silent DG set along with 415V AC Power distribution board comprising of suitable engine coupled to 415V Stamford make alternator both mounted on common base frame with other standard accesies i.e. Fuel tank, Batteries with leads. On Mains failure the DG set shall be started by means of a switch on the control panel.	SET	2	0	0	Yes
2	Transformer - 630 KVA 11/0.433kVA Out door Oil Type Supplying/Receiving, Installation/Erection, Testing and Commissioning of 630kvA ONAN, Copper wound 11/0.433 KV, 50 C/S, Delta star connected, Dyn11 vector group, Oil immersed Outdoor transformer with Off Load circuit Tap changer for Voltage regulation from -10% to +15% in 7 steps of 1.25% on HV side complete with AVR and RTCC panel, including Bucholtz relay, MOG, Oil & Winding temperature alarm and trip contacts with wiring upto marshalling box, and all standard accesies as required, complete with Cable End box suitable for 1RX3C x 95sq.mm. 11 KV(UE) XLPE insulated Al. Ar. Cable at HT side and XLPE insulated Al. Busduct for LT side, including S/F of M.S. channel of size 100 x 50 x 6mm for foundation support for transformer, including Drying/filtration of oil of transformer and OLTC Enclousere.Connection with Tap Changing Mechanism etc. as per IS 2026-1977. Rate of SITC of 630kVA Transformer after analysis	SET	2	0	0	Yes
3	Transformer - 500 KVA 11/0.433kVA Out door Oil Type Supplying/Receiving, Installation/Erection, Testing and Commissioning of 500kvA ONAN, Copper wound 11/0.433 KV, 50 C/S, Delta star connected, Dyn11 vector group, Oil immersed Outdoor transformer with Off Load circuit Tap changer for Voltage regulation from -10% to +15% in 7 steps of 1.25% on HV side complete with AVR and RTCC panel, including Bucholtz relay, MOG, Oil & Winding temperature alarm and trip contacts with wiring upto marshalling box, and all standard accesies as required, complete with Cable End box suitable for 1RX3C x 95sq.mm. 11 KV(UE) XLPE insulated Al. Ar. Cable at HT side and XLPE insulated Al. Busduct for LT side, including S/F of M.S. channel of size 100 x 50 x 6mm for foundation support for transformer, including Drying/filtration of oil of transformer and OLTC Enclousere.Connection with Tap Changing Mechanism etc. as per IS 2026-1977. Rate of SITC of 500kVA Transformer after analysis	SET	1	0	0	Yes
4	LT Switchboard-1 (Indoor Type) Design, Fabrication, Supply, Erection,Testing and commissioning of Powder coated Main LT Switchboard fabricated out of 14 gauge CRCA sheet steel in cubical, compartmentalised, free standing floor /wall mounted, dust and vermin proof, (degree of protection IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval shall be taken for each panel before fabrication. (All hardware's like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification and LT Switchboard shall be comprising broadly of the following equipment's Incomer: 1000Amps, S.C.C 50kA for 1 Sec ACB (EDO) - 2 Nos. 1 Bus coupler 1000Amps, S.C.C 50kA for 1 Sec ACB Outgoing Feeders: 4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;400 Amps - 2 Nos. (35/36 kA S.C.C);250 Amps - 2 Nos. (35/36 kA S.C.C);160 Amps - 15 Nos. (35/36 kA S.C.C);100 Amps - 15 Nos. (25 kA S.C.C);Aluminium Bus 1000 Amps, S.C.C 40kA for 1 Sec;CT, PT, MCBs, Ammeter, Voltmeter with Selector Switches, Energy meter,indication lamps(On- Off Trip, Power On - RYB);630Amps Isolator, S.C.C 35kA for interconnection with DG Set;Supply, Testing, Installation & Commissioning of LT Switchboard (Indoor Type)	SET	1	0	0	Yes
5	LT Switchboard-2 for Quarters (Indoor Type) Design, Fabrication, Supply, Recontesting and commissioning of Powder coated Main LT Switchboard fabricated out of 14 gauge CRCA sheet steel in cubical, compartmentallised, free standing floor /wall mounted, dust and vermin proof, (degree ofprotection IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification and LT Switchboard shall be comprising broadly of the following equipments;Incomer each 800Amps, S.C.C 50kA for 1 Sec ACB (EDO);1 Buscoupler 800Amps, S.C.C 50kA for 1 Sec ACB;Outgoing Feeders:;4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;400 Amps - 2 Nos. (35/36 kA S.C.C);250 Amps - 2 Nos. (35/36 kA S.C.C);160 Amps - 15 Nos. (35/36 kA S.C.C);Aluminium Bus 800 Amps, S.C.C 40kA for 1 Sec;CT, PT, MCBs, Ammeter, Voltmeter with Selector Switches, Energy meter, indication lamps(On- Off Trip, Power On - RYB);Supply, Testing, Installation & Commisioning of LT Switchboard-2 for Quarters (Indoor Type)	SET	1	0	0	Yes
6	LIGHTING DISTRIBUTION BOARD FOR STREET LIGHTING (LDB). Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Lighting dist. Boards (LDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing, dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.;Each LDB shall broadly comprise of the following equipment/components);Incomer: 100A, 4 Pole, MCCB (P-2), 25kA S.C.C (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links - 1 No.;Outgoing feeders:;4 Pole, MCCB (P-2), (Ics=100%Icu) 16kA S.C.C Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;63A TPN MCCBs - 2 Nos.;63A TPN MCBs - 15 Nos.;Indication lamps(On- Off Trip Power On -- RYB),200 A aluminium bus, s.c.c 35 KA for 1s;This LDB shall cater power supply to all feeder pillars for campus lighting.;Supply, Testing, Installation & Commisioning cost of LDB.	SET	1	0	0	Yes
7	AC DISTRIBUTION BOARD;Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Aux.Power dist. Boards (Aux.PDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing, dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.;Each ACDB shall broadly comprise of the following equipment/components);Incomer: 160A, 4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links - 1 Nos.;Outgoing feeders:;4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;100A, TPN MCCBs - 2 Nos. (25kA S.C.C);63A TPN MCCBs - 6 Nos. (16kA S.C.C);Indication lamps(On- Off Trip Power On -- RYB), 300 A aluminium bus, s.c.c 35 KA for 1s;ACDB shall be provided for internal power distribution for control & auxiliaries of LT Substation & Switchyard equipments.;Supply, Testing, Installation & Commisioning cost of ACDB	SET	2	0	0	Yes
8	ESE Make: 3 Phase 415 VAC, 50Hz contract type 200 KVAR APFC standard specification with delta connected capacitor bank.	each	3	0	0	Yes
9	Public Address System	No	12	0	0	Yes
10	Transmitters	No	60	0	0	Yes
11	MAIN DESK- Top Panel: Made of 90mm Thick (41mm) using MDF and Veneer. Finish- PU Coating, Scratch Resistance 2H Leg: Made of 25mm thk using MDF and Veneer with PU coating. Modesty: Made of 16mm thk using MDF and Veneer with PU coating. ERU- Top Panel: Made of 25mm Thick (+imm) using MDF and Veneer. Finish- PU Coating, Scratch Resistance 2H Other Panel: Made of 18mm Thick (41mm) Pre-Lam Particle Board. Drawer base : Made of 8mm thick (41mm) Pre-Lam Particle Board. Castor: Dia - 40mm & height 55mm (6 no.s lockable) Finish- Veener with PU Coating 2DR/3DR PEDESTAL- Top Panel: Made of 25mm Thick (41mm) using MDF and Veneer Other Panel: Made of 18mm Thick (41mm) Pre-Lam Particle Board. Castor: Dia - 40mm & height 55mm (2 lockable & 2 unlockable) Finish- Veener with PU Coating. As per the direction of engineer-in-charge.	each	15	0	0	Yes
12	BACK UNIT- Top Panel: Made of 18mm Thick (£1mm) Pre-lam Particle Board. Finish: Veener with PU Side Panel : Made of 16mm Thick (41mm) Pre-lam Particle Board. Shelf Panel: Made of 22mm Thick (41mm) Pre-Lam Particle Board. Door Panel: Made of 18mm Thick (41mm) MDF Board. Upper door : Made up of 5mm thick Glass.As per the direction of engineer-in-charge.	each	85	0	0	Yes
13	The Main table shall be of size 2400 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. As per the direction of engineer-in-charge.	each	45	0	0	Yes
14	Back Unit Dimension- 2215 x 410 x 2000As per the direction of engineer-in-charge.	each	45	0	0	Yes
15	MAIN DESK-Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. As per the direction of engineer-in-charge.	each	35	0	0	Yes
16	MAIN DESK-Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management. Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. As per the direction of engineer-in-charge.	each	15	0	0	Yes
17	The main desk of shall be of size 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick MFC (Melamine Faced Chipboard) also there should be 30 mm MDF (Medium density fiberboard) black pad.The modesty panel shall be of 18 mm thick MFC (Melamine faced chipboard).The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad.The main table should be of duck noise profile edge in order to enhance the workspace aesthetics. The maestro return desk size shall be 1200 Width mm x 600 Depth mm x 730 Height mm.The top panel shall 25 mm thick MFC ( Melamine Faced Chipboard) .The Modesty panel shall be 18 mm thick MFC coated. The leg of the return desk shall be 25 mm thick MFC (Melamine faced chipboard) plus the right and left pad should be 30 mm thick MDF (medium density fiber ) coated. The Maestro Mobile Pedestal size shall be 400 Width mm x 560 Depth mm x 560 Height mm.The top panel shall be 25 mm thick MFC( Melamine Faced Chipboard) plus all the other panels shall be 18 mm thick coated with MFC (Melamine Faced Chipboard). In Mobile pedestal all other panels shall be of 18 mm thick MFC (Melamine Faced Chipboard).In Mobile pedestal lock and Castors shall be Provided. The handle shall be of Metal. The maestro joining table RHS shall be of size 1200 Width mm x 1050 Depth mm x 750 Height mm.The top panel shall be 25 mm thick with MFC (Melamine Faced Chipboard).The leg of the joining table shall be of metal.Pigmented Polyurethane Coated joining table. As per the direction of engineer-in-charge.	each	15	0	0	Yes
18	Book Case Unit of size 790 x 400 x 2200 made of 25mm Thick (±1mm) MDF Board with 2 side PU painted finish & hardness 2H. Leg:Made of metal tubes.As per the direction of engineer-in-charge.	each	90	0	0	Yes
19	Back Unit of size 1400 x 470 x 760 made of 25mm Thick (±1mm) MDF Board with 2 side PU painted finish & hardness 2H. Leg:Made of metal tubes. As per the direction of engineer-in-charge.	each	35	0	0	Yes
20	Desk With ERU LHS size shall be 2100 Width mm x 1600 Depth mm x 765 Height mm .The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm.The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top .Also there shall be 0.35 mm PVC lipping on frame.The Modesty panel shall be 1100 x 405 x 46 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping.The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish).As per the direction of engineer-in-charge.	each	15	0	0	Yes
21	Table of size 1500 x 750 x 740 TABLE TOP The panel is made from 25 $0.5 mm THK Pre Laminated Boards as per lS?12823 with 2 mm Thick PVC beading on all sides SIDE PANEL -The panel is made from 25 $0.5 mm THK Pre Laminated Boards as per lS?12823 with 2 mm Thick PVC beading on user sides and 0.8 mm on Top & Bottom side. The side panels have 2 glide screws each for leveling of the desk. MODESTY PANEL -The panel is made from 18 $0.5 mm THK Pre Laminated Boards as per lS-12823 with 0.8 mm Thick PVC beading on all edges.FREE STANDING PEDESTAL- The free standing pedestal is made from 18 :05 mm THK Pre Laminated Boards as per lS-12823 with combination of 2mm & 0.8 mm Thick PVC. As per the direction of engineer-in-charge.	each	80	0	0	Yes
22	OFFICE TABLE Office Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18 mm thick Pre Laminated top size 1365 X 680 X 735 (Approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with both side drawer lock. As per the direction of engineer-in-charge.	each	75	0	0	Yes
23	Table 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. As per the direction of engineer-in-charge.	each	86	0	0	Yes
24	Office Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side one drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. As per the direction of engineer-in-charge.	each	86	0	0	Yes
25	Study Table Study Table made of 15mm MDF for table/drawer front 14mm MDF for inner drawer left & right. 3mm for drawer bottom,15mm PB for other panels,0.18mm PVC vacuum laminating for surface of table top and drawer front, 0.4mm lippingfor other panels. Load bearing capacity (table top):35 Kg. Construction: Knock down fitting Dimension- 1000L x 480 W x720H. As per the direction of engineer-in-charge.	each	90	0	0	Yes
26	Computer Table Model Companion C-2 size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. As per the direction of engineer-in-charge.	each	125	0	0	Yes
27	Table Size-600W x 450D x 750H mm Compact and easy to use . There is enough space to accommodate a printer shelf and CD rack. small, but truly luxurious in space.Top made-up of 1.5 cm Medium Density Fiber. All the other panels are made of Particle board. Vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels. As per the direction of engineer-in-charge.	each	75	0	0	Yes
28	Reception Table Double Arch with DL Top of size 2410 x 1065 x 725-Worksurface, 1035-Counter, D L Top Top-Clean matt PU finish 18mm thick Inside radius 700.0 Mm Outside radius ? 1350.0 mm Depth ? 650 mm Glass-Frosted Glass 10mm thick Diamond cut finishing on edges Inside Radius ? 1202.5mm Outside radius ? 1402.5mm Depth ? 200mm, Modesty Panel-MS Perforated sheet Below Worksurface : 0.8 mm (thick) x 665.0 mm (height) x 1345.0 mm (flat length) Above Worksurface : 0.8mm (Thick) x 260 mm (height) x 1345.0 mm (flat length), Legs-MS tube 1.6 mm thick Diameter 50.8 mm Height 604 mm. As per the direction of engineer-in-charge.	each	10	0	0	Yes
29	Conference Table-Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. As per the direction of engineer-in-charge.	each	15	0	0	Yes
30	Conference Table-Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. As per the direction of engineer-in-charge.	each	10	0	0	Yes
31	HIGH BACK CONFERENCE CHAIR WITH FIX BACK, FIX SEAT & FIX ARMREST- SEAT/BACK ASSEMBLY:The seat is made up of 1.2 +0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back is made up 1.2 +0.1cm. thick hot pressed plywood measured as per QA method describedin OCP-OQLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. HIGH BACK SIZE 48cm.(W) X 76.0cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM:The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 + 2 kgf as per 1S:7888 for 25% compression.ARMREST(FIXED)-The armrest top is moulded from polyurethane (PU) and moulded on to a fixed type tubular armrest support made of @3.8140.03 cm x 0.240.01 cm thk M.S. E.R.W tube having chrome plated finish. KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT MECHANISM. The mechanism is designed with the following features 360° revolving type, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features: 360° revolving type. Single point control. Front pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment. 4-position locking with anti-shock feature.FIXED SPINE The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 40.05 cm thk HR Steel andiis black powder-coated ( DFT 40-60 microns). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0£0.3 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. As per the direction of engineer-in-charge.	each	300	0	0	Yes
32	Very High Back Chair SEAT/BACK ASSEMBLY: The seat is made up of 1.2 1 0.10m. thick hot pessed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with leather and moulded . Polyurethane Foam. The back foam is designed with contoured lumber support for extra comfort. The chair is available in three models SIZE: 53.0cm.(W) X 95.4cm.(H), SEAT SIZE: 54.6cm.(W) X 49.00m.(D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness load 16 i 2 kgf as per IS:7888 for 25% compression. SEAT-BACK CONNECTING SPINE:The seat and back are arrested together with ?spine made of 0.8, 10.05 cm thk HR Steel and is black powder-coated ( DFT 40?60 microns ). ARMREST ASSY: The armrest assy. comprises of three parts viz. the armrest support tube and P.U.armrest and the armrest top. The armrest tube assy. is made of 2.54:0.03cm x 0.16:0.0128cm M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with MS. insert. The armrest top is made of ABS & upholstered with foam & leather.Static seat depth adjustment = 5.0 i 0.5cm with 5 position locking.PNEUMATIC HEIGHT ADJUSTMENT: it has an adjustment stroke of PNEUMATIC HEIGHT ADJUSTMENT (for PCH-9202RV): it has an adjustment stroke of 12.0 .TELESCOPIC BELLOW ASSEMBLY (for PCH-9202RV): The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSY: The pedestal is made of die-cast aluminium with buf?ng finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 i 0.5cm pitch~center dia. (77.0 i 1.00m with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. As per the direction of engineer-in-charge.	each	160	0	0	Yes
33	Very High back chair with headrest- SEAT/BACK ASSEMBLY: The seat is made up of hot pressed moulded reconstituted wood of 1.240.1cm thickness and backis two part injection moulded plastic.SEAT SUB ASSEMBLYSIZE: 49.0cm (W) X 49.5cm (D), BACK SUB ASSEMBLYSIZE: (HIGH BACK): 46.0 cm (W) X 57.0 em (H)., HEAD REST SUB ASSEMBLYSIZE: 26.0cm (W) X 12.0 cm (L) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam is moulded with Density = 45 kg/m* and Hardness load 16 + 2 kgf as per 1S:7888 for 25% compression. ARMRESTS -The armrests are Pressure die casted in polished Aluminium with PP Arm, Tops. PNEUMATIC HEIGHT ADJUSTMENT-The pneumatic height adjustment has an adjustment stroke of 10.0 t0.3cm. ADJUSTABLE BACK SUPPOR: The backrest is connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0£0.5cm for the comfortable back support to suitable individual need. PEDESTAL ASSEMBLY(FOR SE 00/01/02TX }: The pedestal is Pressure Die cast polished Aluminium and fitted with 5 nos. twin-wheel castors. The pedestal is 65.0£0.5cm.pitch-centre-dia.(75.0 1.0cm. with castors). HEADREST -The headrest assembly is consist of Leather upholstered and inner with PU foam with density =45 kg/m®. It has swiveling movement. As per the direction of engineer-in-charge.	each	50	0	0	Yes
34	Full Back Chair with Head Rest Seat/Back Assembly: The Cushioned seat assembly consists of seat outer (material-30% Glass Fiber Nylon) & upholstered Seat inner (material-Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back is mad up of Back outer (material-Glass Fiber Filled Nylon) & Back inner (material-PP) and upholstered using Polyester Mesh Fabric with high tenacity yarn. with The Active Bio-Synchro mechanism automatically adjusts the tilt tension based on user?s body weight. On reclining, the seat glides backward and provides uninterrupted back support thereby increasing seating comfort.The chair back is ergonomically contoured and has a wide back form. The bio flex lumbar support made from engineered plastic is flexible yet provides firm support to the back. The structural mesh allows free movement of air eliminating odour. As per the direction of engineer-in-charge.	each	450	0	0	Yes
35	Fabric upholstery, Adjustable Armrests, Knee Tilt Synchro Mechanism, Nylon Pedestal. As per the direction of engineer-in-charge.	each	200	0	0	Yes
36	Half Mesh and Half Fabric Back Upolstery, Adjustable Armrests, Knee Tilt Synchro Mechanism, Nylon Pedestal. As per the direction of engineer-in-charge.	each	120	0	0	Yes
37	HIGH BACK CHAIR WITH SEAT DEPTH ADJUSTMENT- SEAT ASSEMBLY The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 4542 kg/m*,and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.The stitched cover is made from spacer fabric and leatherette Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.940.03cm x 0.16 +0.0128cm. it upholstered with spacer fabric and leatherette, BACK SIZE : 45 cm. (W) x 75.5 cm. (D), Armrest- The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of @3.8140.03 cm x 0.240.01 cm thk MS E.R.W tube. The armrest height adjustable up fo 6.540.5cm in 5 steps.The Armrest structure is powder coated (DFT 40-60 micron)., Pedestal Assembly- The pedestal is injection moulded ip-biSck\33% giass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal \| 1205 om. pit h-center dia.(76.1+1.0 cm. With castors.). As per the direction of engineer-in-charge.	each	120	0	0	Yes
38	SEAT/BACK ASSEMBLY: The seat/back are made up of 1.2 +0.1cm. thick hot pressed plywood (measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. PCH-7000 HIGH BACKSIZE 56.0 cm. (W) x 88.0 cm. (H) PCH-7000 SEAT SIZE 56.0 cm. (W) x 49.0 cm. (D), HIGH RESILIENCE " style="color: #0C730F;" ng-if="perItem.filevisibleType == ndaConstantval && perItem.isDownloadPossible == 'Y' && fieldLocal.shortName == 'file_name'">(NDA accepted at }) -->	each	75	0	0	Yes
39	Half Mesh and Half Fabric Back Upolstery, Adjustable Armrests, Knee Tilt Synchro Mechanism, Nylon Pedestal. As per the direction of engineer-in-charge.	each	100	0	0	Yes
40	Adj Seat & back Ht, Adj Pu Arms, Bi-Synchro Mechanism, Wishbone? inspired, T- Spine structure, Nylon Pedestal, 5 Position Tilt Limiter. As per the direction of engineer-in-charge.	each	120	0	0	Yes
41	Revolving Chair Made up of Mild Steel Understructure With Leatherette Upholstery with premium net back gives snug feel & superior finish, while the contact-tilt mechanism offers you different adjustments. Use the armrest or shift the seat height to help you obtain maximum comfort.The Poise chair with ergonomic lumbar support rises to the occasion of the challenging task of combining design and function. Its ergonomic back curves along your spine, ensuring your posture does not suffer. As per the direction of engineer-in-charge.	each	160	0	0	Yes
42	Visitor Chair SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression, Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette VISITOR TUBULAR FRAME (FU3312): The tubular frame is cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk S.S 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece, Overall Size-60.9W x 64.2 D x 98.2H x 44.8 SH cm. As per the direction of engineer-in-charge.	each	140	0	0	Yes
43	Chair The seat and back are made up of 1.2cm thick hot pressed plywood, Upholstered with fabric and moulded Polyurethane be Foam together with moulded ABS seat and back covers.. The Back foam is designed with contoured lumber support for extra comport. The back size: 50cm (W) x 49cm (H) and seat size 50cm (W) x 46cm (D). The Tubular Frame is cantilever type & made of dia 2.54cm x 14 BG M.S. E.R.W. tube and black Powder coated. The polyurethane foam is moulded with density= 45+/-2Kg/m3 and hardness =20+/2 kg. on hampden machine at 25% compression. The Armrest is one piece made of black integral skin polyurethane with 50-70 shore ?A? hardness and reinforced with MS insert. . As per the direction of engineer-in-charge.	each	140	0	0	Yes
44	Chair with SS Understructure SEAT/BACK: The Seat and Back are made up of injection moulded high impact strength PolyPropylene polymer compound with indoor grade UV resistance SEAT SIZE: 52.5 cm. (W) x 53.2 cm. (D), BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) .S.S. UNDERSTRUCTURE: The tubular welded frame is made from Dia 2.22 ± 0.03 cm x O.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm Stainless Steel 202 grade tube. The tubes are buff polished to give shiny finish. As per the direction of engineer-in-charge.	each	160	0	0	Yes
45	Sofa Set(3+1+1) Single Seater of Size 840 x 900, Three Seater of size 1900 x 990 mm Upholstery Material: PVC, Burgundy, Thickness : 1 mm Frame- Material : Pine Wood, Moisture content : 10 -12 %, Thickness of Plywood used : 12 mm & 18 mm, Foam : Seat -Material : Slab stock + moulded foam with pocket spring embedded at moulded foam, Density : 28 kg/m3 of slab stock foam and 42 kg/m3. As per the direction of engineer-in-charge.	each	20	0	0	Yes
46	Three Seater Sofa of size Sturdy Solid Wood Construct The sofa frame is made up of plywood that undergoes multi-step treatment for protection against termites and bugs. Horizontal metal stiffeners are added to make the frame more robustTwo Tone Upholstery The PVC upholstery gives the furniture a contemporary appeal. It also helps provide a cool feeling, while you are relaxing. Stainless Steel Legs Stainless Steel Legs enhances aesthetics and prevents the sofa from rusting. Squivel Mechanism In this sofa you will be able to experience a smooth 360 degree clockwise and anti-clockwise rotation while sitting. Elegant Design The sofa displays sharp edges, fillets and angles that give the sofa an elegant touch. The detailed features is indicative of the excellent craftsmanship Opulent Single Seater Sofa of size Sturdy Solid Wood Construct The sofa frame is made up of plywood that undergoes multi-step treatment for protection against termites and bugs. Horizontal metal stiffeners are added to make the frame more robustTwo Tone Upholstery The PVC upholstery gives the furniture a contemporary appeal. It also helps provide a cool feeling, while you are relaxing. Stainless Steel Legs Stainless Steel Legs enhances aesthetics and prevents the sofa from rusting. Squivel Mechanism In this sofa you will be able to experience a smooth 360 degree clockwise and anti-clockwise rotation while sitting. Elegant Design The sofa displays sharp edges, fillets and angles that give the sofa an elegant touch. The detailed features is indicative of the excellent craftsmanship. As per the direction of engineer-in-charge.	each	20	0	0	Yes
47	Coffee Table-Coffee Table of size 1100 W x 600D x 500H mm With a black and glass top base, Glaze coffee table is the perfect center piece for your living room. The table is crafted from an 8 mm tempered glass top and a silver powder coated understructure, which adds resilience to the table. The table also has a 6 mm tempered bottom glass for storing all essentials.. As per the direction of engineer-in-charge.	each	92	0	0	Yes
48	Three seater chair Cross Beam- made of MS ERW rectangular black powder coated Tube of 80 x 40 x 2 mm Leg & arm rest chrome plated made of cold rolled steel. Arm rest & leg assembled to the cross beam with M10 x 100 mm bolts. Seat & back 1.6mm thick powder coated perforated shell of cold rolled MS Sheet. Side Bar of chrome plated solid steel 30 x 12 mm (DIN 174) with flunting & plastic insert .The shell is assembled on the cross beam with help of M8 Bolts The overall dimension is 1608mm (L) x 695mm (H) x 555mm (D), Seat Height : 405mm. As per the direction of engineer-in-charge.	each	70	0	0	Yes
49	seat shell : the seat shell should be a welded assembly of seat,back and side frame. the seat and back should be made of 0.12±0.013cm thk cr steel sheet with oblong perforations.they should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk hr steel.the welded assembly should be powder coated ( dft 40-60 microns ). the seat has a front water fall edge to provide popliteal clearance for comfortable seating. it also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. clean and flat surfaces of seat and back aids in easy maintenance. * seat size : 47.8 cm (w) x 44.6 cm (d) * back size : 41.6 cm (w) x 23.0 cm (h) understructure assembly: understructure assembly consshould be ts of connecting beam and leg assembly made of m.s. e.r.w. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.the welded structure assembly should be powder coated ( dft 40-60 microns ).the leg assembly should be fitted with shoes and levellers in nylon. the leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. the shoes fitted to leg assembly help in aligning the structure for back to back arrangements. levellers take cshould be of uneven flooring.connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment arm rest assembly: armrest assembly consshould be ts of armrest frame and armrest pad . the armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk hr steel and it should be powder coated ( dft 40-60 microns ). armrest pad should be injection molded in nylon and should be fitted onto the armrest frame. The cushions for seat and back should be made up of 1.5 ± 0.1 cm thk foam on a flat MR grade ply 0.8±0.04cm thk and should be upholstered with leatherite As per the direction of engineer-in-charge.	each	40	0	0	Yes
50	Desk cum bench Scholar combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This Four seater model is best suited for schools and colleges.Dimension-1800 * 895 * 750 (Appx.) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS ?C? sections. Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS ?C? sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop. Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor. As per the direction of engineer-in-charge.	each	280	0	0	Yes
51	Desk cum bench Scholar combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges.Dimension-1500 * 895 * 750 (Appx.) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS ?C? sections. Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS ?C? sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop. Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor. As per the direction of engineer-in-charge.	each	140	0	0	Yes
52	Steel MF System of size 6'x36"x18" with six shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf, All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964. As per the direction of engineer-in-charge.	each	62	0	0	Yes
53	Single Sided Wood & Steel Book Rack- Width: 925mm Main Unit/900mm Add On Unit, Height: 1890mm(Incl. 85mm Skirting)Depth: 300mm, construction- Rigid knockdown construction, Back panel up to the bottom of third rack for additional rigidity.Material- Racks, Back Panel & Skirting: CRCA 0.8mm Thickness Side panels:25mm thk Prelaminated particle board (PLB) with laminate on both sides.Finish- Metal panels: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Stackability-The add-on units can be stacked width wise to form a bank of racks having common side panel.Number of Racks- Bottom plus four fixed racks. (Total 5 loading levels). Each rack is provided with stiffener at bottom for strength. Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum, Label Holder- Label Holder on each main unit to insert labels for identification As per the direction of engineer-in-charge.	each	65	0	0	Yes
54	Auditorium Chair :- High Back Without Desklet with PU Armtop SEAT ASSEMBLY: The seat assembly is made of polyurethane foam moulded with M.S. tubular frame made of 01.9 ±0.02cm x 0.16±0.013cm thk MS. E.R.W round tube with flexible support straps running across the length and width of the frame insert which is upholstered with fabric. The Seat has an auto-tip up feature making it stay in upright position when not in use enabling clear row passage. Approx. Seat Size : 45.5cm (W) x 46.5cm (D). BACKREST ASSEMBLY: The back assembly is made of polyurethane foam moulded with M.S. tubular frame made of 01.9 ±0.02cm x 0.16 ±0.013cm thk M.S.E.R.W round tube with flexible support straps running across the length and width of the frame insert, upholstered with fabric and has a plastic back cover.. Approx. Back Size : High Back- 45.5cm (W) x 82.4cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-3 kg/m3. SIDE PANEL / AISLE PANEL: The chair rests on the ground on two side panel frames fabricated from 0.12±0.020cm thk CR steel sheet which is cladded with fabric upholstery. The side panel frame is grouted to the floor using 2 nos. of anchors for each panel through 0.3 ± 0.05cm thk HR steel base plate. SYNCHRO SLIDE MECHANISM: The Synchro-slide mechanism is designed using heavy duty slides aiding in relaxed posture. The slider is connected to back using linkages to achieve synchronous motion between seat & back.The Synchro-slide has an stroke of 60+/-5 mm and is mounted on the side panel. PU ARMREST:The armrest is made up of integral skin Polyurethane Foam The armrest is snapfitted with sidepanel. POWDER COATING: Steel components are epoxy polyester powder coated . (Methodex, Wipro, Godrej, Durian, Geeken)	each	45	0	0	Yes
55	Mid Back Auditorium Chair as per layout design UNDERSTRUCTURE: MS black powder coated understructure with integrated, auto tip-up mechanism. Footprint area of base plate: 150mm X 230mm X 5mm thick. Backrest supporting beam width: 460mm (L) X 80 X 40 ? 14 BG HR tube. Understructure fixed to ground by foundation expansion bolts M10 X 100 with washer and nut. SEAT ASSEMBLY: Seat assembly is made of Polyurethane foam moulded with 1.5 cm. thick plywood insert as per the following dimensions: BACKREST ASSEMBLY: Back assembly consists of Polyurethane foam moulded with MS tubular frame insert. The insert is composed of Diameter 19mm x 16BG MS tubular frame with flexible nylon support straps running across the length and width of the frame. POLYURETHANE FOAM: The polyurethane foam used for seat and back is moulded with density = 45+ 2 kg/c.m. ARMREST ASSEMBLY: Armrest understructure is upholstered PU foam moulded with MS insert. Arm tops are made of black Integral Skin polyurethane with 50-70 Shore ?A? Hardness & reinforced with wooden insert. Armrest width = 70mm and are offered as common / individual armrest between chairs (Methodex, Wipro, Godrej, Durian or equivalent)	each	500	0	0	Yes
56	Conference Table made of particle board and has wire management facilities for uncluttered wiring. It has profiled legs with twin colored modesty for better looks, Single 675.0 Wx600.0Dx 750.0H Double 1350.0Wx 600.0Dx 750.0H, Work surface Top thickness is 25mm PLB with PVC beading allover, Legs Modesty Wire Manager Made from 18mm thick PLT having curved profile.Made from PLT (Prelaminated Twin) boards 18mm thick in two shades. A Wire Manager running along the width of desk fitted on the modesty Panel from Inside. (Methodex, Wipro, Godrej, Durianor equivalent) do do all complete job as per direction of E/I.	each	20	0	0	Yes
57	High Back Chair - The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric Back Size : 45.5 cm. (W) x 53.0 cm. (H), Seat Size :48.5 cm. (W) x 47.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "SM shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. of approoved brand as per direction of E/I. (Methodex, Wipro, Godrej, Durian, Geeken or equivalent)	each	20	0	0	Yes
58	Sofa Set(3+1+1) Single Seater Sofa- 860 (W) X 920 (D) X 820 (H) mm Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, available in Rich Black Leatherite, Three Seater Sofa- 2050 (W) X 920 (D) X 820 (H) mm Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, available in Rich Black Leatherite of approoved brand (Methodex, Wipro, Godrej, Durian, geeken or equivalent) do do all complete job as per direction of E/I.	each	4	0	0	Yes
59	Centre Table Sturdy Coffee tables, elegantly crafted in wood and metal combinations with float glass top & second layer below the top, the float glass top joined using UV technology for a good & clean look of top size 1000 mmW x 450 mmH x 650mm D (Methodex, Wipro, Godrej, Durian or Equivalent).	each	2	0	0	Yes
60	Corner Table Sturdy Corner tables, elegantly crafted in wood and metal combinations with float glass top & second layer below the top, the float glass top joined using UV technology for a good & clean look of top size 300 mmW x 450 mmH x 300mm D (Methodex, Wipro, Godrej, Durian or Equivalent).	each	5	0	0	Yes
61	Table-size 1200 x 750 x 743 Desk Top thickness 18, Top Dimensions- 1200 x 750, Overall Height 743 Understructure: The understructure is in prelam panels, made with PLT boards.2Drawer and 3Drawer storage units with different combinations to support Tops, made with 18mmPLT boards of different colours. Modesty and back panels, made with 18mm PLT boards. The Pedestals/Storages are fitted with necessary Locks PLT Board Tops (Straight Edges): Tops are of 18mm thickness. Made of 18mm thick PLT board with 2mm Edge banding. Wenge and Savannah Maple PLT board used for making Tops. PVC membrane Tops (with profiles):Tops for senior main and back unit desk are of PVC membrane pressed. Made of 25mm thick MDFone side laminate board with 0.4mm PVC membrane pressed on to tops. The top has Duck nose and half round profiles edges. he top is made in only one finish: European Ash. (Methodex, Wipro, Godrej, Durian or Equivalent).	each	2	0	0	Yes
62	High Back Chair - The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric Back Size : 45.5 cm. (W) x 53.0 cm. (H), Seat Size :48.5 cm. (W) x 47.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "SM shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent.	each	20	0	0	Yes
63	Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock (Methodex, Wipro, Godrej, Durian or equivalent) do do all complete job as per direction of E/I.	each	4	0	0	Yes
64	Visitor Chair The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric Seat Size :48.5 cm. (W) x 47.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression (Methodex, Wipro, Godrej, Durian or equivalent) do do all complete job as per direction of E/I.	each	10	0	0	Yes
65	Storage Rack of size 8'x36"x18" with eight shelves Prime quality CRC sheet conforming to IS 513D/10748/5986.The pitches of the slots at 19.05mm, Panels/Shelves: 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964 of approoved brand as per direction of E/I. (Methodex, Wipro, Godrej, Durian or Equivalent).	each	10	0	0	Yes
66	Almirah Plain with four shelves Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm. (Methodex, Wipro, Godrej, Durian or Equivalent).	each	5	0	0	Yes
67	Reception Table double arch with DL Top Modular elegant table of curvilinear decorative laminate top 18mm thick at 725mm H (Approx) and 10mm frosted glass at 1035mm H(Approx) above the work surface. The understructure made of mild steel tube dia 50.8mm. The front modesty panel below and above work surface made of 0.8mm mild steel perforated sheet. nova 3 drawers free standing pedestal of size 300W x 435Dx 646H (Methodex, Wipro, Godrej, Durian or Equivalent).	each	2	0	0	Yes
68	Woodden Chair of Size of seat size 50cm (W) x 46cm (D) having cushion on seat without arms for green room. (Methodex, Wipro, Godrej, Durian or equivalent)	each	20	0	0	Yes
69	Table of size 1800x2100x750 Work Surface- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade.Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management, Modesty Panel- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to 1S-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Under structure- Made of 25mm Thick Pre-lamlnated twin board of E1-P2 grade and approved shade confirming to 1S-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door Storage - Made of 25mm Thick Pre-lamlnated twin board of E1-P2 grade and approved shade confirming to 1S-12823:1990, Edge banded with matching 2 mm thick PVC lipping . Handle is provided for ease of opening, Storage is provided with cam lock for security of approoved brand as per direction of E/I.(Methodex, Wipro, Godrej, Durian or equivalent)	each	3	0	0	Yes
70	Chair High back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded ABS seat & back integral skin polyurethane with reinforced with M.S. Insert. The tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm of approoved brand as per direction of E/I. (Methodex, Wipro, Godrej, Durian or equivalent)	each	3	0	0	Yes
71	Visitor Chair The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric Seat Size :48.5 cm. (W) x 47.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression of approoved brand as per direction of E/I. (Methodex, Wipro, Godrej, Durian or equivalent)	each	10	0	0	Yes
72	Lab Table of Size 4130mm X 1540mm X 900mm Frames - All CFrames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994. The suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame shall also have skirting at back bottom side. Horizontal Members - should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. As per the direction of engineer-in-charge.	each	92	0	0	Yes
73	Notice Board with size 4' X 3' Surface Material-woolen felt / fabric in various colours,Core material-9 mm thick soft board,Backing Material-0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thick ISI mark GP sheet,Aluminium frame-Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - 16 mm thickness. As per the direction of engineer-in-charge.	each	40	0	0	Yes
74	Non Magnetic Small White Board 4' x 3'- Surface Material-0.62 to 0.72 mm thick laminate sheet with extra melamine surface,Core material-8 mm thick Particle board,Backing Material-0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,Aluminium frame-Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - 16 mm thickness. As per the direction of engineer-in-charge.	each	70	0	0	Yes
75	Lab Stool of circular type 30.0 +/- 0.5 cm and made up of 0.1+/- 0.012 cm thk CR Steel. It is welded to the understructure and black powder coated ( DFT 40-60 microns). UNDERSTRUCTURE ASSEMBLY: The understructure is made of MS tube 2.2 +/- 0.03 cm x 0.16+/- 0.0128 cm thk MS ERW tube. lt is welded ti the MS fabricated circular seat assembly and black powder coated ( DFT 40-60 microns ). The understructure is provided with black PP injection moulded ferrules. As per the direction of engineer-in-charge.	each	260	0	0	Yes
76	Supply, Installation, Testing, commissioning and handing over of passenger electric traction lift a) Speed-1.00 meter per second b) Stop at all levels. c) Opening-All opening on same side i. Passenger capacity: 08 Passenger/544 Kg ii. Serving floors: GF + 9 Floors. iii. Travel-54.00 Meter (approx) Make- KONE/OTIS/THYSSEN KRUPP or equivalent	each	13	0	0	Yes
77	STP-100 KLD CAPACITY Nature of effluent -Domestic Sewage from Kitchen water,W.C, Bathroom Water. Effluent Discharge after Treatment PH-6.5-7.5 BOD (3 days) 10-15mg/liter S.Solids-10-15mg/liter COD -60-80 Oil & Grease -5 mg/Liter Design,Installation,testing & Commisioning of Sewage treatment plant completely for integrated Commercial & Domestic waste capacity 100 cum/MBBR Technology Treated efluent will be used for garding flushing water & soft water purpose & overflow will go to Municipal sewer Comprising of following item.Any other item which the agency envisage for better performence of the plant is requred to be included in the rate. BAR SCREEN-SS-304 fabricated bar screen with 8-12 mm normally placed gaps in screen to allow sewage water flow and prevent higher size debris from entering into the Collection tank at the very entry point it self of the tank,Screen kept inclined at 45 degree to the horizontal with hand track as requried. MS TANKS OF 5 MM MSFRP tanks of requried sizes such as Aeration tank, Tube Settler, No Choice Tank, Sludge Holding, Treated Water Tank. RAW SEWAGE PUMPS -Centrifugal,Non Clogl,Submersible raw sewage pumps to pump sewage from equalization tank to areation tank suitable for handling minimum of 10-12 mm solid particles having a liquid discharge rate of minimum 3 cum /hrs at a head of 10-12 meters suitable for operation on 3 phase 400 voit AC supply Contractor shall ensure submission of detail civil GA Drawings, P & I diagram for the above mentioned component & additional component if so required fcr complete working of the STP.	SET	1	0	0	Yes
78	Providing and fixing guard rails as per drawing & Technical Specifications and direction of engineer in charge.	Meter	350	0	0	Yes
79	Providing and fixing Litter bins complete as per Technical Specifications and direction of engineer in charge.	No	30	0	0	Yes
80	Utility ducts in form of 600 mm Ø of NP-4 Pipe across the Project Highway and along with inspection chamber. and direction of engineer in charge.	No	1300	0	0	Yes
81	Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.	SET	4	0	0	Yes
82	Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge	No	4	0	0	Yes
83	Design, manufacture, supply, erection, testing & commissioning of following rating of DG Sets in Accoustic Enclosure, having self excited & self regulated 415 V, 3 Phase, 4- Wire, 50 Hz, 0.8 p.f. Alternator coupled with multi-cylinder, turbo-charged/ turbo- charged after cooled as called for, Diesel Engine capable to generate the power not less than the required BHP to achieve the alternator capacity as given below, with radiator Cooled, hospital type silencers and Electronic governer (G3 Governing System), DG set controller suitable for Auto Synchronization & Auto Load Sharing with microproces based Synchronization relay like Woodward/Dief/ Deepsea or equivalent including providing of Engine control panel, 24V batteries of suitable rating, battery-charger with battery leads, inbuilt oil fuel tank of capacity as per OEM standards and complete with all standard accesies & protection as required and as per specifications, including first filling of lube oil, fuel tank, providing common base plate, anti vibration pads, drip trays, foundation bolts, nuts, bolts, cable termination/adopter box sutiable to terminate upto 5 nos. of 3.5Cx300 sq.mm. XLPE cables as required for a complete installation including RCC/PCC foundation for DG set as per the structural detail for Dynamic Load submitted by the Vendor and approve by the Client. DG set should comply relevant Indian standards. DG shall have Remote Monitoring System.;400 KVA (With Acoustic Enclosure)	SET	1	0	0	Yes
84	Mural painting with good quality paints as per approved size, theme, design, colour, drawing, etc. and at locations directed by the Employer?s Representative. Note: The graffiti/ representative images shown here are indicative only. Contractor shall submit various designs and approved designs (different for different places/locations) shall be executed.	Square meter	160	0	0	Yes
85	Art work with CNC Machines on granite, marble, sand stone, wood or metals. Art work on granite stone, sand stone, marble stone, solid wood, metals of required thickness as per approved size, theme, design, colour, drawing, etc. and at locations directed by the Employer?s Representative. Note: The graffiti/ representative images shown here are indicative only. Contractor shall submit various designs and approved designs (different for different places/locations) shall be executed	Square meter	350	0	0	Yes
86	Suppliying and filling good quality cinder in down slab etc. all complete as per building specification and direction of E/I. First floor to third floor	Cubic meter	420	0	0	Yes
87	S/F/F 2 H.P. CROMPTION SUBMERSIBLE PUMP OF ISI MARK WITH STARTER, PANNEL, CABLE, WELL COVER etc. ALL COMPLETE JOB	SET	8	0	0	Yes
88	Supplying, Installing, Testing, Commissioning of 2.0 T inverter AC including appropriate stabilizer complete setup of Make- (Daikin/Carrier/Hitachi/Voltas or equivalent ) all complete job as per direction of E/I.	each	400	0	0	Yes
89	Double Ended LT Outdoor Substation and Indoor Switch Gear Room comprising of following major items Gang operated 3-Phase 11Kv, Manually operated outdoor Air Break Switch (AB Switch) Supplying/Receiving, Installation/Erection, Testing and Commissioning of Gang operated 3-Phase 11Kv, 200A 40kA for 1Sec Manually operated Air Break Switch(AB Switch) with Earth Switch to be mounted on two pole structures.	SET	4	0	0	Yes
90	Providing and fixing of Plain Colour (RAL) finished steel doors made of GPSP (120 GSM Galvanized) sheet; 1.2mm thick for frame and 0.8 mm thick for shutter with shutter thickness of 46mm with SS304 accessories like Ball Bearing Hinges, Mortize Lock, Dore Stopper and Tower Bolt and other necessary items with all complete job. (Make Tata Pravesh, JSW, Shakti Hormann, Jindal or equivalent)	Square meter	3445.37	0	0	Yes
91	Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange	each	436	0	0	Yes
92	Heavy Duty Wall mounted Liquid Soap Dispenser Silver Colour. Chrome finish	each	352	0	0	Yes
93	Heavy Duty Towel Ring Round with Round Flange - Chrome finish	each	256	0	0	Yes
94	Heavy Duty Soap Dish Holder	each	92	0	0	Yes
95	Heavy Duty Stainless Steel 304 Floor Grating with cockroach trap of 125x125 (mm) size	each	532	0	0	Yes
96	Heavy Duty Bib Cock with Wall Flange 15 mm nominal bore.	each	832	0	0	Yes
97	Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required.	SET	2	0	0	Yes
98	Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse and refilling and secured with holding clamps, bolts, nuts etc. as required.	each	2	0	0	Yes
99	Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.	each	6	0	0	Yes
100	Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.	SET	12	0	0	Yes
101	Erection of disc/ pin insulator for 11 KV over head lines as required.	SET	12	0	0	Yes
102	Installation and Commissioning of Display Type LCD, Display Panel Diagonal size (mm) 1778 Width of The Effective Display Area of The Panel (mm) 1539, Height of The Effective Display Area of The Panel (mm) 866, Backlight Technology LED, Display Resolution (Pixels) 1440X1080, Display Brightness (Nits) 329, Touch interface Touch sensitive as well as pen driven,Touch Technology Infrared optical, Number of touch points (Number) 10, Response time (milli seconds) 8, Provision of in built speakers, other peripherals as per technical specifications and as directed by engineer in charge. (Make-Sony/panasonic/LG/Ben-Q/Viewsonic or equivalent)	each	8	0	0	Yes
103	Installation and Commissioning of Display Screen size Diagonal 65" 4K Interactive Display dual-pen writing with a 3mm diameter pen tip 2.1 Stereo sound with a built-in woofer Built-in myViewBoard? whiteboarding software to collaborate on the go 4-way split screen content sharing with built-in ViewBoard® Cast software LAN sharing with slot-in PC Built-in RS232 port and vController software for remote control Panel Size 65" Type/Tech TFT LCD Module with DLED Backlight. Display Area (mm) 1431 (H) x 807 (V) (64.5? diagonal) Aspect Ratio 16:9 Native Resolution UHD 3840x2160(Pixels) Colours 1.07B colours (10bit) Brightness 350 nits (typ.) 300 nits (min.) Contrast Ratio 5000:1 (DCR) Response Time 8ms Viewing Angles H = 178, V = 178 typ. Backlight Life 30,000 Hours (Min) Surface Treatment Anti-Glare Bezel Slim rientation Landscape Platform Processor ARM Cortex A73 dual-core 1.2GHz RAM 2GB DDR4 Storage 16GB Touch Type/ Tech IR Recognition Touch Resolution 32767 x 32767 Touch Point 20 points touch, 10 points writing INPUT HDMI 2.0 x3 (3840x2160 @60Hz) RGB / VGA x1 Audio x1 other peripherals as per technical specifications and as directed by engineer in charge. (Make-Sony/panasonic/LG/Ben-Q/Viewsonic or equivalent)	each	16	0	0	Yes
104	Supplying,Installing,Testing of Day/night fixed IP Dome Camera with a discreet, dust and IK rated vandal-resistant indoor casing. Varifocal 2.5-10 mm P-Iris lens, remote focus and zoom. Multiple, individually configurable H.264 and Motion JPEG streams; max HDTV 1020P or 2MP resolution at 30 fps. WDR more than 70dB. Video motion detection and active tampering alarm. Memory card slot for optional local video storage. Power over Ethernet. Includes mounting bracket for wall/ceiling or junction boxes as per technical specifications all complete job as per direction of E/I Make- Secure eye/Hikvision/CP Plus or equivalent	each	60	0	0	Yes
105	Supplying,Installing,Testing of Day/night IP Bullet with a discreet, dust and IK rated vandal-resistant indoor casing. Varifocal 2.8-10 mm P-Iris lens, remote focus and zoom. Multiple, individually configurable H.264 and Motion JPEG streams; max HDTV 1020P or 2MP resolution at 30 fps. WDR more than 70dB.Video motion detection and active tampering alarm. Memory card slot for optional local video sorage. Power over Ethernet. Includes mounting bracket for wall/ceiling or junction boxes as per technical specifications all complete job as per direction of E/I Make- Secure eye/Hikvision/ CP Plus or equivalent.	each	10	0	0	Yes
106	Supplying,Installing,Testing of Multi- Directional Sensor PTZ Camera 5 MP,1/2.3? 5 MP CMOS Sensor with Built-in Automatic IR Cut Filter, 360 ? degrees at all times irrespective of Angle of View32 X Digital Zoom, H.264 and MJPEG, motion detection, Analytics based Pan/ Tilt/ Zoom camera.Built in SD card slot with support upto 64 GB with Class 10 speed, Microphone input support, IP 66, IK10,Axis, ONCAM as per technical specifications all complete job as per direction of E/I Make- Secure eye/ Hikvision/CP Plus or equivalent.	each	18	0	0	Yes
107	Supplying,Installing,Testing of All-in-one Video Network recording solution (NVR) for up to 64 channels, Pre-installed, pre-configured IP storage solution with 32 TB storage capacity, RAID-5 protected,Hot-swappable hard drives, Temperature +10 °C to +35 °C, Relative humidity-8 to 90% (non-condensing), CE, UL Certified. Recording shall be calculated for all cameras at full frame rate & resolution for 15 days as per technical specifications all complete job as per direction of E/I Make- Secure eye/Hikvision/ CP Plus or equivalent.	each	4	0	0	Yes
108	Supplying,Installing,Testing of 42"/43" Full HD LED Professional Display for Monitoring with mounting accessories as per technical specifications all complete job as per direction of E/I (Make- LG/Samsung/ Panasonic/Sony or equivalent)	each	16	0	0	Yes
109	Supplying,Installing,Testing of Networking Poe Switch, 10/100/1000 BT ports, 24 ports providing PoE as per 802.3a/f as per technical specifications all complete job as per direction of E/I (Make- D-Link / Cisco/ Panasonic or equivalent)	each	20	0	0	Yes
110	Supplying,Installing,Testing of Layer 2 networking switch, 10/100/1000 BT ports, 24 ports providing PoE as technical specifications all complete job as per direction of E/I. (Make- D-Link / Cisco/ Panasonic or equivalent)	each	2	0	0	Yes
111	Supplying,Installing,Testing of 1 G SFP Module as per technical specifications all complete job as per direction of E/I. (Make- D-Link / Cisco/ Panasonic or equivalent)	each	10	0	0	Yes
112	Supplying,Installing,Testing of KVM Switch 8 Port as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent)	each	5	0	0	Yes
113	Supplying,Installing,Testing of 6 Core Optical Fibre cable in prelaid PVC conduits / pipes / raceway all complete job as per direction of E/I. (Make: Finolex/havells or equivalent)	Meter	3000	0	0	Yes
114	Supplying,Installing,Testing of Optical Fibre cable Jointer as per technical specifications all complete job as per direction of E/I	each	500	0	0	Yes
115	Supply, installation and Testing of Media Convertor as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent)	each	5	0	0	Yes
116	Supplying & installing UTP networking Cat-6 cable suitable for LAN/WAN computer net working as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent)	Meter	2000	0	0	Yes
117	Supplying,Installing,Testing of 42 U Rack for Switches as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent)	each	10	0	0	Yes
118	Supplying,Installing,Testing of 3x3 I/O box with face place Female Rf45 as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent)	each	200	0	0	Yes
119	Supplying,Installing,Testing of CAT 6 Giga Speed 1.2 m Patch Cord as per technical specifications all complete job as per direction of E/I. (Make:Digisol / D-Link/Cisco or equivalent)	each	200	0	0	Yes
120	Supplying,Installing,Testing of Command Centre Workstattion with Intel Xeon ProcessorE3-1240 v3 (Quad Core HT, 3.40GHz Turbo, 8MB) or higher, 16 GB Memory or Higher, 6 TB 3.5 inch Serial ATA (7200 rpm) HDD, 16X DVD RW Drive, 1 GB NVIDIA QUADRO K600 Graphic card or higher, Operating System: Windows 10 Professional with1920 x 1080 Display all complete job as per direction of E/I (Make: DELL/HP/ACER or equivalent)	each	2	0	0	Yes
121	Supply, installation, testing and commissioning of the following components as required of IP PBX systems,16 S AC, Configration: 8 Trunk Line with 224 Analog Extention all complete job as per direction of E/I. Make:- MATRIX/Dlink./Panasonic or equivalent	each	1	0	0	Yes
122	Supply, installation, testing and commissioning of the following components as required of IP PBX systems, 12S AC, Configration :- 110 Analog Extention all complete job as per direction of E/I Make:- MATRIX/Dlink./Panasonic or equivalent	each	1	0	0	Yes
123	Supply, installation, testing and commissioning of the following components as required of IP PBX systems, 12S AC, Configration :- 48 Analog Extention all complete job as per direction of E/I Make:- MATRIX/Dlink./Panasonic or equivalent	each	2	0	0	Yes
124	Supply, installation, testing and commissioning of Opertor Console all complete job as per direction of E/I Make:- MATRIX/Dlink./Panasonic or equivalent	each	2	0	0	Yes
125	Supply, installation, testing and commissioning of DP BOX 100 PAIR all complete job as per direction of E/I	each	2	0	0	Yes
126	Supply, installation, testing and commissioning of 100 PAIR KRONE BOX all complete job as per direction of E/I	each	8	0	0	Yes
127	3C X 1.5 Sqmm Power twisted pair copper cable all complete job as per direction of E/I (Make: Havells or equivalent)	Meter	600	0	0	Yes
128	Supply, installation, testing and commissioning of 12 U Networking Rack with Glassdoor all complete job as per direction of E/I (Make:- MATRIX/Dlink./Panasonic or equivalent)	each	16	0	0	Yes
129	Supply, installation, testing and commissioning of Telephone Sets (analog and digital) shall be line powered from the system and connected on two wires (single pair) only all complete job as per direction of E/I. Make: BEETEL/ Panasonic/Motorola or equivalent)	each	80	0	0	Yes
130	Supply, installation, testing and commissioning of RJ 11 1.2m Patch Cord all complete job as per direction of E/I Make:- MATRIX/Dlink./Panasonic or equivalent)	each	100	0	0	Yes
131	Supply, installation, testing and commissioning of 20 KVA Online UPS without Battery, Input 3 Phase Ouput 1 Phase, True Online UPS Systems with input Power factor of 0.99, THDi < 5%, AC-AC efficiency 94 %, Inbuilt isolation transformer covering Online as well as Bypass path having 30 Minutes battery Backup with each UPS System with all accessoriesas as per Eaton. Parllaling Upto 6 Units ( without Synchronization Panel as per oem) Isolation Transformer, Active Input power factor Correction, Input Phase Sequence Corrector shall be inbuild with UPS. Including For 30 Minutes Backup, 32 Nos of 12V 42AH Battery,Racks Links and Interlink DC cable from Battery to UPS and other neccessary accessories all complete job as per direction of E/I. (Make:- APC / MICROTEK / NUMERO or equivalent)	each	2	0	0	Yes
132	Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).	Cubic meter	300	0	0	Yes
133	Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).	Cubic meter	300	0	0	Yes
134	Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).	Cubic meter	300	0	0	Yes
135	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm	Cubic meter	100	0	0	Yes
136	Fine dressing of the ground.	Square meter	750	0	0	Yes
137	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).	Cubic meter	100	0	0	Yes
138	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge	Cubic meter	100	0	0	Yes
139	Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions	Square meter	300	0	0	Yes
140	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately);Holes 1.2 m dia and 1.2 m deep	each	70	0	0	Yes
141	Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.	each	70	0	0	Yes
142	Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical ? U ? shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm	each	200	0	0	Yes
143	Supplying & Fixing of Vertical/Roller Blinds approved Colour & Sample of Make- Vista/Decor all complete job as per direction of EI.	Square meter	800	0	0	Yes
144	Fixing of Storage type water heater/ Geyser with required accessories like 15 mm CP angle valve on inlet, heavy duty reinforced flexible PVC connector for cold water line and flexible CP brass connector with CP checkout for hot water line, CPVC line connection, MS bracket with two coats of enamel paint, anchor fastners etc to hang the units, providing and fixing of 16 A 3 Pin plug of, etc complete as required. Make- Hindware/ parryware/cera/jaquar as per direction of E/I. Capacity 15 Liters	each	20	0	0	Yes
145	Providing & Fixing water purifier cum water cooler made of stainless steel having storage capacity of 40 liter & cooling capacity 40 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge .	each	20	0	0	Yes
146	Supplying and fixing Water Purifier with R.O & U.V :- Water Purifier of 15 Ltr. with with R.O & U.V Technology heavy duty all complete job as per direction of EI. (Make-Aquagaurd/Eureka Forbes /Kent or equivalent )	each	10	0	0	Yes
147	Providing and fixing of 15 Watt LED round Down lighter of make- Havells/ Crompton/ Bajaj/polycab /Phillips or equivalent all complete with necessary fittings and connections all complete job as per direction of EI.	each	150	0	0	Yes
148	Supplying and fixing 10/15 watt LED type garden light of make- Havells/ Crompton/ Bajaj/polycab /Phillips or equivalent with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc., on pipe post including connection with FR PVC insulated copper conductor cable and earthing the body etc. etc as required all complete job as per direction of EI.	each	80	0	0	Yes
149	Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.	each	160	0	0	Yes
150	Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.	each	90	0	0	Yes
151	Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.	each	90	0	0	Yes
152	Supplying, installation, testing & commissioning fire talk back slave station in surface/recess with ptt knob & speaker/microphone enclosed in ms/abs box	each	90	0	0	Yes
153	Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete.;10 Zone	each	4	0	0	Yes
154	Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos.(one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.	each	4	0	0	Yes
155	Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having xlpe insulation ,steel wire armouring & FRLS outer sheath complete as required	Meter	1600	0	0	Yes
156	Supplying & fixing of 25 mm dia MS flexible pipe with pvc coating and all necessary ancilaries and accessories like coupler as required	Meter	80	0	0	Yes
157	Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below: 6 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder of Make :- ABC/Eco Fire all complete job as per direction of E/I.	each	10	0	0	Yes
158	Supply, installation and fixing of M.S bucket of 9 liters capacity painted with red oxide paint & lettered as 'Fire' with White and red mounted on freestanding stand, as required including filling with dry sand all complete job as per direction of E/I.	each	20	0	0	Yes
159	Supply, installation and fixing of First aid box as approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 all complete job as per direction of E/I.	each	30	0	0	Yes
160	Supply, installation and fixing of MS Axe of approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 all complete job as per direction of E/I.	each	20	0	0	Yes
161	Supply, installation and fixing of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) all complete job as per direction of E/I.	each	20	0	0	Yes
162	Providing and fixing Hand dryer of Make Dolphy/Alpine all complete job as per direction of E/I.	each	5	0	0	Yes
163	Providing laminated ply wood panelling upto specified height with 1.0 mm lamination mica matt finish of make- Green/Century laminate/ Mika over 6 mm thick ply wood fitted and fixed over hollock wood frame of 25 x 25mm posts at 60 cm centres and 25 x 25mm horizontal members at approx 60 cm centers including cost of anchoring the panelling to walls properly including TW lipping on the top surface as per drawing specification and direction of E/I.	Square meter	325	0	0	Yes
164	Providing fixing testing and commissioning of cp brass shower mixer with provision of over head shower with 115 mm long bend pipe in built spout ,spout/shower selector with wall flange complete with all accessories as requried and making good the walls wherever required Make- Hindware/ parryware/cera/jaquar as per direction of E/I.	each	20	0	0	Yes
165	Providing Fixing Saith finish Stainless steel AiSI 316 grade wall mounted coat hook on door complete Make- Hindware/ parryware/cera/jaquar as per direction of E/I.	each	5	0	0	Yes
166	Providing Fixing hand Shower (Health Fauct) (ABS Body) with 1mtr long Easy Flex Tube in Chrome Finish and wall hook. Make- Hindware/ parryware/cera/jaquar as per direction of E/I.	each	5	0	0	Yes
167	12x 6 Feet, Snooker Table, Cherry Colour, covered with Wiraka 777 cloth with 8 Legs(7x7) and Wooden Block Cushion	each	1	0	0	Yes
168	Natural Wood Frame Club Size Carrom Board With Coins, Striker & Powder 90 cm Carrom Board (Brown)	each	4	0	0	Yes
169	Full Size Yoga Mat	each	50	0	0	Yes
170	Synthetic Badminton Court Mat, Water Resistant & Pest Control	Square meter	330.03	0	0	Yes
171	Table Tennis Board 100mm wheels, 4 Wheels With Lock and 4 Without 20mm x 50mm Frame Dupont Polyurethane Antiglare Paint 25mm Top ITTF Approved	each	2	0	0	Yes
172	Chess, Lodo, Jigsaw and other small board games.	SET	2	0	0	Yes
173	Smartrun Dallas 7 HP Peak Treadmill \| 15-level Auto-Incline \| Max Weight-150kg \| Max Speed-20kmph	SET	10	0	0	Yes
174	Heavy Duty Dumbbell of all sizes and length	SET	10	0	0	Yes
175	26 KG Magnetic Aluminium Cast Flywheel Upto 180 KG weight-bearing capacity Foam grip handle with heart rate sensors Large & Non-Slip Footpads Mounted Wheels for Easy movability Gym Trainer Machine	SET	10	0	0	Yes
176	Smart Bike trainer Floor Space - 10005101165mm Carton Size - L1005W260H945mm Flywheel Weight - 16.5lb Max User Weight - 120Kg Max User Height - 6ft 4in	SET	5	0	0	Yes
177	Marsh Rowing Machine \| 8 Level Magnetic Resistance \| Max Weight-120kg	SET	5	0	0	Yes
178	Foldable Water Rower \| 16 Level Water Resistance \| Max Weight-150kg	SET	5	0	0	Yes
179	Smartcross Bern Elliptical Cross Trainer with Bluetooth \| 2kg Flywheel \| Max Weight-120kg \| 8 Level Magnetic Resistance	SET	5	0	0	Yes
180	Provision of Wall décor with Decorative wall paper of requires themes of standard quality selected as per direction of engineer incharge for intire decoration of the block all complete job as per direction of EI.	Square meter	200	0	0	Yes
181	Providing and installing of copper flower pot having capacity of 1 Cft with pvc decorative plant/flower for interior decoration all complete job as per direction of EI.	each	40	0	0	Yes
182	Providing and supplying of floor matt of size 4 feet x 2.5 feet of juit finish all complete job as per direction of EI.	each	20	0	0	Yes
183	MAIN CURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor, 2nos. air breaker contactors , 2nos. micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering.	No	1	0	0	Yes
184	CENTER CURTAIN made out of glazed cotton curtain cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangements & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1HP motor ; 2nos. air breaker, 2 nos. micro switches for auto stop, 3nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering.	No	2	0	0	Yes
185	REAR CURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement and motorised operation complete with runners, master runners, pullies, 3mm steel rope wire, 1HP motor 2 nos, air breaker contactors 2 nos. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm. The curtain should be stitched in double gathering.	No	2	0	0	Yes
186	WINGS :-;Providing and fixing cloth wings made out of black glazed cotton cloth fixed on overhead pivote track	No	6	0	0	Yes
187	FRILLS :-;Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipe.	No	3	0	0	Yes
188	50mm dia B class GI pipe to be hung from existing grid or roof structure for side wings, lighting bars.	Meter	100	0	0	Yes
189	Front of House Light Bar 1 and 2;Pabble Convex Spotlight 2000 ;SITC of Pabble Convex spot light 2500W 230V/240V Lens Type 150mm dia, pebble-convex, Reflector 100mm dia. Aluminium, Colour Gel Dimension 185x185mm, Throw 2-17m, Beam angle 8degree-60degree;Type: TONOPC 2000 Plus of LDR or equivalent models in Selecon/ ETC	No	6	0	0	Yes
190	1000W, 240 Volt, PAR Sealed Beam Light with CRC Sheet Metal and aluminum die casting, mat black color/aluminum & yoke. ;Type: PAR-64 (With Lamp)	No	14	0	0	Yes
191	575 W CMY moving head spotlight, fitted with a discharge 575W lamp combined with a dicroic parabolic reflector which gives a light efficiency of 10.100 Lux at 5 mt.with motorized focussing, motorized iris, 3 selectable beam aperture angles (11° / 15° / 18°), 2 gobo wheels (18 gobos), with extractable gobo holders to change gobos rapidly in any working condition, 2 colour wheels (16 colours), rotating prism, 2 frost filters, and electronic or electromagnetic ballast.;Type: XR-9 of DTS or equivalent models in SGM/ Clay Paky or equivalent	No	4	0	0	Yes
192	Ist Lighting BAR; Pabble Convex Spotlight 1000	No	4	0	0	Yes
193	SITC of Pabble Convex spot light 1000W 230V/240V Lens Type 150mm dia, pebble-convex, Reflector 100mm dia. Aluminium, Colour Gel Dimension 185x185mm, Throw 2-17m, Beam angle 8degree-60degree;Type: ARIA-PC1000 Plus of LDR or equivalent models in Selecon/ ETC;Profile Spotlight	No	4	0	0	Yes
194	SITC of 1200W profile light with Double condenser & zoom, 68mm dia. Glass reflector, 185 x185mm colour frame, narrow beam angle, GX9.5 lamp base, 5-25m throw, 14,3 Kg net weight in 10853020 Black colour.;Type:NOTA 8/22 of LDR or equivalent models in Selecon/ ETC;Fresnel Spotlight, 1000W	No	4	0	0	Yes
195	SITC of Lens Type 150mm dia. Fresnel, Reflector 100mm dia. Aluminium, Colour Gel Dimension 185x185mm, Throw 2-15m, Beam angle 10degree-56degree. ;Type: ARIA-F1000 PLUSof LDR or equivalent models in Selecon/ ETC;1000W flood light with aluminum Asymmetrical reflector, double pole micro switch, 290x270mm color frame, R7s lamp base, 2-10m throw, 5,3 kg weight in 10806050 Black, (10806051) white/ (10806052) Silver color.;Type: INNO A 1000 of LDR or equivalent models in Selecon/ ETC	No	4	0	0	Yes
196	15 x 3W Full colour LEDs, 16 million colours; linear colour temperature 3200°K ÷ , 500°K; 16 selectable types of White. No infrared emission; no ultraviolet emission, LEDs average lifespan: 100.000, hours, 3 lenses sets available (Spot, Medium flood, Wide flood) Optical units, Via any DMX lighting console Control, IP65 protection level against the penetration of solids and liquids Protection, FOS is made on aluminium and steel Construction, Integrated power supply / LED controller (Z10 IP65 or Z10 IP20); external dedicated Power supply, Z1 or Z4 power supply / LED controllers Connection, Powerconn + XLR connectors (Z10 IP20) or Harting connectors (Z10 IP65) ;Type: FOS 100 Full Color of DTS or equivalent models of SGM/ Studio Due	No	4	0	0	Yes
197	IInd Lighting BAR;Profile Spotlight SITC of 1200W profile light with Double condenser & zoom, 68mm dia. Glass reflector, 185 x185mm colour frame, narrow beam angle, GX9.5 lamp base, 5-25m throw, 14,3 Kg net weight in 10853020 Black colour. Type:NOTA 8/22 of LDR or equivalent models in Selecon/ ETC.	No	4	0	0	Yes
198	Fresnel Spotlight, 1000W SITC of Lens Type 150mm dia. Fresnel, Reflector 100mm dia. Aluminium, Colour Gel Dimension 185x185mm, Throw 2-15m, Beam angle 10degree-56degree. Type: ARIA-F1000 PLUSof LDR or equivalent models in Selecon/ ETC Make: LDR/ Selecon/ ETC	No	4	0	0	Yes
199	1000W flood light with aluminum Asymmetrical reflector, double pole micro switch, 290x270mm color frame, R7s lamp base, 2-10m throw, 5,3 kg weight in 10806050 Black, (10806051) white/ (10806052) Silver color. Type : INNO A 1000 of LDR or equivalent models in Selecon/ ETC	No	4	0	0	Yes
200	Cyclorama Lighting BAR;FOS 33 FULL COLOUR TRIPLE BRACKET with 15 x 3W Full colour LEDs, 16 million colours; linear colour temperature 3200°K ÷ 5500°K; 16 selectable types of White, No infrared emission; no ultraviolet emission, LEDs average lifespan: 100.000 hours, Optical units: 3 lenses sets available (Spot, Medium flood, Wide flood), Control: Via any DMX lighting console, Protection: IP65 protection level against the penetration of solids and liquids, Construction: FOS is made on aluminium and steel, Power supply: External dedicated Z1, Z1 Outdoor or Z4 power supply / LED controllers. ;Type: FOS 33 Full Color Triple Solo of DTS or equivalent models of SGM/ Studio Due	No	2	0	0	Yes
201	6 Channel Splitter;Make: Modern Stage Service/ Canara / Effectron or equivalent	No	4	0	0	Yes
202	Back Lighting BAR;1000W, 240 Volt, PAR Sealed Beam Light with CRC Sheet Metal and aluminum die casting, mat black color/aluminum & yoke. ;Type: PAR-64 (With Lamp)	No	22	0	0	Yes
203	Ladder;M.S. Pipe Ladders to be provided on sides of the Stage to be fixed on the existing GI pipe or top grid. Made of 50mm x 25mm MS pipe of following Size	No	12	0	0	Yes
204	1000W, 240 Volt, PAR Sealed Beam Light with CRC Sheet Metal and aluminum die casting, mat black color/aluminum & yoke. ;Type: PAR-64 (With Lamp)	each	22	0	0	Yes
205	Dimmer and Controller;SITC of 24CH×4KW Electronic Dimmer with Dual DMX signals input and can work simultaneously, Fade accuracy: 4096 ( 16 bit) , Integrative design, light weight, easy for maintenance, Independent dimming, Soft and hard patch for optional, English menu, LCD display, user-friendly interface, Response time: quick, normal or slow, helping prolong lamp's life, 50 backup cues, run both manually and automatically, Status selectable when no DMX signal, 3 working modes for each channel: normal, fix and switch, 5 User-selectable curves: linear, square, s-curve, extraction or user-defined, Very low interference, Over load and Neutral-lost warning system force to limit output, Each dimmer output can be set as range of 110 to 250VAC Technical parameter, Voltage: 160Vac~240 Vac, Frequency: 45Hz~65Hz, Fade accuracy: 4096 ( 16 bit), Auto voltage compensation: effective with a 10% voltage variation input, output variation?1%, Power Consumption: 60W, Output: 3KW for 24 channel, Signal: DMX-512, Dimming range: 0~100%, Dimming Curves: Linear, S-curve, square and extraction or user-defined, Dielectric intensity: ?2500/1min, Response time: 23ms, Pre-heating: 0~25/255, Operating: 24 hours daily, IP Rating: IP 33, Dimensions: 824 x 405 x 158 mm.;Type: MSS- 24 WM of Modern Stage Services or equivalent models of Canara / Effectron	No	4	0	0	Yes
206	Control panel with Internal Flash Drive, similar in functionality to a hard disk but faster and more rugged. Provides enough storage for:- The entire Fixture Library of more than 3,000 files, Over a hundred show files. Removable external Memory Stick. Cache the entire Fixture library of more than 3,000 files, Improved method of Fixture selection for Patching, New Locate Fixture button, Fixture Selects (selecting the top row of faders), 2048 Channels. 240 Intelligent Fixtures. 240 Dimmer Control Channels. Theatrical Plotting and Playback functions. Shape Generator for instant creation of patterns and effects. 15 Playback Masters controlling 450 memories, chases or cue lists. MIDI and Bass, Mid, Treble sound to light triggers. Colour VGA output fitted as standard. Front panel now reverse printed Poly Carbonate Laminate using technology from the Diamond 4, this is incredibly hard wearing and looks excellent. Each console individually has an electronic serial number, linked to physically engraved metalwork numbering making reselling of stolen consoles more difficult. Supplied with PC applications: Avolites Visualiser, Pearl Simulation program and Cache builder Type: Pearl 2010 of Avolite (UK) of equivalent model of SGM/ 088	No	4	0	0	Yes
207	Supplying, instalation, testing & commissioning of All LED Light fixtures. Ceiling Surface mounted LED Down lighter made of white powdercoated CRCA housing and PMMA dome diffuser , with 14W led complete with all accessories & electronic constant current driver as required(Make- Philips/ Wipro/Syska/havells or equivalent	each	35	0	0	Yes
208	Supplying, instalation, testing & commissioning of All LED Light fixtures. 36W recessed 600x600 LED light fixture with high end diffuser for uniform distribution of light complete with electronic constant current driver & accessories as required(Make- Polycab/ Philips/ Wipro/Syska/havelles or equivalent	each	96	0	0	Yes
209	Supplying, instalation, testing & commissioning of All LED Light fixtures. 20W LED batten 4' long with high end diffuser for uniform distribution of light complete with electronic deriver & accessories as required (Make- Polycab/ Philips/ Wipro/Syska/havells or equivalent	each	30	0	0	Yes
210	Supplying, instalation, testing & commissioning of All LED Light fixtures. 15W recessed round LED light fixture with high end diffuser for uniform distribution of light complete with electronic constant current driver & accessories as required (Make- Polycab/Philips/ Wipro/Syska/havells or equivalent	each	90	0	0	Yes
211	Supplying, instalation, testing & commissioning of All LED Light fixtures. Mirror light 8W LED batten 1' long with high end diffuser for uniform distribution of light complete with electronic deriver & accessories as required (Make- Polycab/Philips/ Wipro/Syska/havells or equivalent	each	20	0	0	Yes
212	Supplying, instalation, testing & commissioning of All LED Light fixtures. LED Down lighter made of white powdercoated CRCA housing and PMMA dome diffuser , with 10W led complete with all accessories & electronic constant current driver as required (Make- Polycab/Philips/ Wipro/Syska/havells or equivalent	each	40	0	0	Yes
213	Supplying, instalation, testing & commissioning of All LED Light fixtures. 15W recessed round LED light fixture with high end diffuser for uniform distribution of light complete with electronic constant current driver & accessories as required (Make- Polycab/ Philips/ Wipro/Syska or equivalent	each	15	0	0	Yes
214	Supplying, instalation, testing & commissioning of All LED Light fixtures. 36W recessed 600x600 LED light fixture with high end diffuser for uniform distribution of light complete with electronic constant current driver & accessories as required (Make- Polycab/ Philips/ Wipro/Syska/havells or equivalent	each	80	0	0	Yes
215	LED exit signage of Box size in mm 325x425x365(Make- Prolite/syska/havells or equivalent	each	10	0	0	Yes
216	9w RECESSED MOUNTED downlighter luminaire as required (Make- Polycab/Syska/Havelles/ Philips/ Wipro or equivalent	each	45	0	0	Yes
217	Supply Installation, Testing and commissioning of Variable Refrigerant Volume (VRV-X) type multi unit air-conditioning system by using 410A refrigerent complete with indoor and outdoor units with individual controller for cooling & Heating application Unit shall be provided with micro processor based panel for sequential starting of condensing units, coils,expansion valves etc with lifting and placing on MS structure as required as per the specifications and drawings as per direction & approoval of E/I. 20 hp	No	4	0	0	Yes
218	Supply Installation, Testing and commissioning of Variable Refrigerant Volume (VRV-X) type multi unit air-conditioning system by using 410A refrigerent complete with indoor and outdoor units with individual controller for cooling & Heating application Unit shall be provided with micro processor based panel for sequential starting of condensing units, coils,expansion valves etc with lifting and placing on MS structure as required as per the specifications and drawings as per direction & approoval of E/I. 16 HP	No	2	0	0	Yes
219	Supply, Installation, Testing and commissioning of variable refrigerant volume modular type indoor units comprising of all accessories as per the specifications. The indoor units shall be suitable to work on cooling as well as heating mode.The indoor units shall be suitable for operation on 220 ±6% volts, 50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under "Special Conditions" and the indoor units shall be of following capacities as per direction & approoval of E/I. 3.3 TR Cassette Type IDU	No	10	0	0	Yes
220	Supply, Installation, Testing and commissioning of variable refrigerant volume modular type indoor units comprising of all accessories as per the specifications. The indoor units shall be suitable to work on cooling as well as heating mode.The indoor units shall be suitable for operation on 220 ±6% volts, 50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under "Special Conditions" and the indoor units shall be of following capacities as per direction & approoval of E/I. 8.33 TR Duct Type IDU	No	8	0	0	Yes
221	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. Gas line - 19 mm thk. Insulation	Meter	200	0	0	Yes
222	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. Liquid Line - 13 mm thk. Insulation	Meter	200	0	0	Yes
223	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. 24 Gauge	Square meter	250	0	0	Yes
224	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. 22 Gauge	Square meter	160	0	0	Yes
225	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. Accoustic Insulation	Square meter	250	0	0	Yes
226	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. Themal Insulation	Square meter	160	0	0	Yes
227	Supply,installation,testing and commissioning of Inter connecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps. Grills & Diffuser-6" Grill	Square meter	60	0	0	Yes
228	Drain Piping:-Rigid PVC piping complete with fittings, supports as per specifications and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation.25MM	Meter	250	0	0	Yes
229	Control & Transmission Wiring 2core 1.5 sq.mm flexible control cable with saddles/supports & PVC conduits with hard PVC Pipe to connect Outdoor units with Indoor units	Meter	300	0	0	Yes
230	Commissioning of VRV systems including topping of R410A gas as per site requirements. Refrigerant shall be environmental friendly.	Kilogram	50	0	0	Yes
231	Collar Piece, Duct, Canvass, Grills, Insulation & accessories	LOT	10	0	0	Yes
232	Supllying, Installing, Testing and Commisioning of S9022-RCF Powerd,2way 2x12",900w RMS Line Arry Speakerwith HF, MAXSPL 134dB(4Ohms)(FOH Speaker) of studio master or equivalent.	No	2	0	0	Yes
233	Supllying,Installing,Testing and Commisioning of S9022.Rigging Kit-Ply Bar (FOH) studio master or equivalent.	No	2	0	0	Yes
234	Supllying,Installing,Testing and Commisioning of PA 3.0-RMS-POWER at 2 ?:2x1500w,4 ?:2x1100w,8 ?:2x700w Bridged 4 ?:3000w,8 ?:2200w(For FOH SPEAKER) Studio Master or equivalent.	No	2	0	0	Yes
235	Supllying,Installing,Testing and Commisioning of S028-RCF-POWER at 2 x18",3000w,Sub Woofer,Max SPL 134 DB(SUB WOOFER For FOH ) Studio Master or equivalent.	No	2	0	0	Yes
236	Supllying,Installing,Testing and Commisioning of PA 7.5-RMS-POWER at 2 ?:2x3750w,4 ?:2x2600w,8 ?:2x1800w Bridged 4 ?:7500w,8 ?:5200w(Amplifier For Sub Woofer) studio master or equivalent.	No	2	0	0	Yes
237	Supllying,Installing,Testing and Commisioning of Fire 51-2way 15",500w RMS Passsive Speaker MAXSPL 131dB(Side Feel Speaker) studio master or equivalent.	No	2	0	0	Yes
238	Supllying,Installing,Testing and Commisioning of PA 3.0-RMS-POWER at 2 ?:2x1500w,4 ?:2x1100w,8 ?:2x700w Bridged 4 ?:3000w,8 ?:2200w(For Side Feel SPEAKER) studio master or equivalent.	No	2	0	0	Yes
239	Supllying,Installing,Testing and Commisioning of AIR PRO 28-28 input mixer:24Mic/Line,2sterio,6Aux,6group,Dual EFX PROCESSOR studio master or equivalent.	No	2	0	0	Yes
240	Supllying,Installing,Testing and Commisioning of SDX-4SPEAKER Mgmt System,Line Delay,2way Crossover studio master or equivalent.	No	2	0	0	Yes
241	Supllying,Installing,Testing and Commisioning of Multi 111-8-CH Splitter/Mixer/DIBox studio master or equivalent.	No	1	0	0	Yes
242	Supllying,Installing,Testing and Commisioning of PA 3.0-RMS-POWER at 2 ?:2x1500w,4 ?:2x1100w,8 ?:2x700w Bridged 4 ?:3000w,8 ?:2200w(For monitor Speaker) studio master or equivalent.	No	2	0	0	Yes
243	Supllying,Installing,Testing and Commisioning of Arc 60-6",60W Wall mount Speaker with power tap selection switch studio master or equivalent.	No	4	0	0	Yes
244	Supllying,Installing,Testing and Commisioning of Arc 240A-240W.4 ?,8 ?,16? or 70V,100V output option,5 input studio master or equivalent.	No	4	0	0	Yes
245	Supllying,Installing,Testing and Commisioning of TR 47H-Premium Quality Uhf wireless microphone system,LCD Disply & upto 100 selectable UHF CH studio master or equivalent.	No	2	0	0	Yes
246	Supllying,Installing,Testing and Commisioning of TR 47L-Premium Quality Uhf wireless microphone system,LCD Disply & upto 100 selectable UHF CH WITH Headset STUDIO MASTER or equivalent.	No	2	0	0	Yes
247	Supllying,Installing,Testing and Commisioning of SM 300 I Dynamic Hyper Cardioid instrument microphone studio master or equivalent.	No	2	0	0	Yes
248	Supllying,Installing,Testing and Commisioning of SM 650 XLR pROFESSIONALDynamic Cardioid microphone studio master or equivalent.	No	2	0	0	Yes
249	Supllying,Installing,Testing and Commisioning of 9U Rack Netrack or equivalent.	No	2	0	0	Yes
250	Supllying,Installing,Testing and Commisioning of SVC 10000 Servo Stabilizer of studio master or equivalent.	No	2	0	0	Yes
251	Supllying,Installing,Testing and Commisioning of Podium wired Microphone PGM 625 studio master or equivalent.	No	2	0	0	Yes
252	Supllying,Installing,Testing and Commisioning of Base for Podium wired Mic PGB 10 studio master or equivalent.	No	2	0	0	Yes
253	Supllying,Installing,Testing and Commisioning of Microphone Stand (BIG) DGN ahuja or equivalent.	No	3	0	0	Yes
254	Supllying,Installing,Testing and Commisioning of Microphone Stand (SMALL) DGT ahuja or equivalent.	No	3	0	0	Yes
255	Supllying,Installing,Testing and Commisioning of Speaker Hanging Kit AWB 30 ahuja or equivalent.	No	5	0	0	Yes
256	Supllying,Installing,Testing and Commisioning of Flat Coaxail Speaker Cable FLATO77 Falcon or equivalent.	No	5	0	0	Yes
257	Supllying,Installing,Testing and Commisioning of Microphone Cable MIKE013 Falcon or equivalent.	No	10	0	0	Yes
258	Supllying,Installing,Testing and Commisioning of Male Female Connectors Falcon or equivalent.	No	10	0	0	Yes
259	Supllying,Installing,Testing and Commisioning of Line Array Hanging Kit with Clamp Ahuja or equivalent.	No	10	0	0	Yes
260	Supllying,Installing,Testing and Commisioning of SMX 302T WALL SPEAKER ahuja or equivalent.	No	10	0	0	Yes
261	Supllying,Installing,Testing and Commisioning of CMA 5400 AMPLIFIER ahuja or equivalent.	No	10	0	0	Yes
262	Supllying,Installing,Testing and Commisioning of AWM 700 U2 CORDLESS MIC ahuja or equivalent.	No	10	0	0	Yes
263	Supllying,Installing,Testing and Commisioning of CMD 5200 Delegate Wired Mic ahuja or equivalent.	No	10	0	0	Yes
264	Providing fitting and fixing podium with Inbuilt Speakers, Amplifier, Cordless Mic, Podium Mic, Usb Port make of Ahuja(Wsl2500R) or equivalent do do all complete job as per direction of E/I.	No	10	0	0	Yes
265	Supllying,Installing,Testing and Commisioning of CMC 5100 Chairman Wired Mic ahuja or equivalent.	No	2	0	0	Yes
266	Supllying,Installing,Testing and Commisioning of 4U Rack Netrack or equivalent.	No	2	0	0	Yes
267	Supllying & Installing of Confrence cable Wire of ahuja or equivalent.	No	5	0	0	Yes
268	Supplying Installinng, Testing and commissioning of WXGA projector having Projection Technology RGB liquid crystal shutter projection system (3LCD) Size 0.59" with MLA (D8), Focal Length 6.4mm Zoom Ratio 1.0 - 1.35 (Digital Zoom) with Power Cable: 4.5m, Remote Control ,Computer Cable (VGA Cable): 1.8 m (EB-535W/EB-525W), Interactive Pen x 1 (EB-536Wi), USB cable: 5m (EB-536Wi) of make Panasonic / EPSON Equivalent as per direction of E/I.	each	2	0	0	Yes
269	Supplying Installinng, Testing and commissioning of Ceiling mount kit for projector Online / Equivalent as per direction of E/I.	each	2	0	0	Yes
270	Supplying Installinng, Testing and commissioning of 6'X8', 16:10 Aspect Ratio, Motorized Projection Screen of make Suvira/Milan or equivalent as per direction of E/I.	each	2	0	0	Yes
271	Supplying Installinng, Testing and commissioning of Passive Face Plate with VGA + Audio and HDMI of make Extron/Kramer or equialent as per direction of E/I.	each	2	0	0	Yes
272	Supplying Installinng, Testing and commissioning of 43" Smart LED Display of make Sony or Equivalent as per direction of E/I.	each	3	0	0	Yes
273	Supplying Installinng, Testing and commissioning of 49" LED Display of make LG/Samsung or Equivalent with movable stand made MS as per direction of E/I.	each	5	0	0	Yes
274	Supplying Installinng, Testing and commissioning of P4 mm indoor die-casting aluminum LED Display Screen Size:15.6 x 9.3 ft. Pixel Pitch 4 mm, Module Pixels 4096dots, Module Resolution 80dots × 40dots, Module Size 320mm × 160mm, Module Weight 0.58kg/pc, Drive IC ICN2038S, Cabinet Size(WXH) 960*960 mm, Cabinet Resolution 240 dots x 240 dots, Module Quantity 18 pcs, Pixel Density 65025 dots/m2, Life span ?100,000 hours, IP rating(Front/Rear) IP31, Temperature-operating ?10??60?, Humidity-operating 10%?90% having Source compatibility (with video processor) AV,DVI,HDMI,SDI,S-Video,DPetc. do do all complete job as per direction of E/I.	each	1	0	0	Yes
275	Supply and laying of 20 Mtr. HDMI - HDMI Cable complete with standard accessories as per tender specifications. Approved Makes - Klotz / Kramer or equivalent	No	5	0	0	Yes
276	Supply and laying of 20 Mtr. VGA - VGA Cable complete with standard accessories as per tender specifications. Approved Makes - Klotz / Kramer or equivalent	No	5	0	0	Yes
277	P/F Wooden slats panels with lineal perforations. The panels shall be fire resistant grade with melamine laminate panels 2430mm x 128mm x16mm with 2mm slats at 16 mm pitch, Tongue and Groove edges for seamless mounting having density of 800kg/m3 (base panel confirming to IS 12406 and laminated panel confirming to IS 14587) . The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method. Panel is to be fixed on framework with screw fixed horizontal / vertical to wall at every 600mm c/c with centre & edge bracket in tongue & groove system on CC18 framework along with all accessories.	Square meter	1200	0	0	Yes
278	P/F Gypsum false ceiling and bulkhead, as marked in the drawings, consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 457mm c/c. 12.5mm tapered egged gypboard (confirming to IS: 2095-1996: Part-I) is then screw fixed to ceiling section with 25mm drywall screws at 230mm c/c. Screw fixing is done mechanically with drilling machine with suitable attachment. Finishing with 21 or more coats of plastic emulsion paint.	Square meter	1550	0	0	Yes
279	P/F of acoustically absorptive false ceiling consisting of compressed rockwool/ glass wool acoustical ceiling tiles of size 600 x 600mm, finished in black acoustical fleece. The tiles shall be laid on a black matt finished Galvanized T grid system comprising of main runners 3600x38x24, cross tee 1200x 28x 24mm & wall angle of 3050x24x24mm. The framework to be suitably supported from the false ceiling by means of the GI wire butterfly clips level adjusters etc. , complete as per details. P/F square edge Glass-Wool acoustic ceiling of approved make in size 600 x 600 x 15mm having noise reduction co-efficient of 0.90, and humidity resistance of 95% at 30*C. The weight of the system with the tile should be approx. 4 kg/m2 and the tile should have class A absorption.	Square meter	500	0	0	Yes
280	Providing, Supplying & Fixing 4 mm thick click-n-lock tiles with wear layer of 0.3 mm, made up of Welspun or Unitex Stone Polymer composite, 100% Water & Termitre Proof, Scratch Proof, Scratch / Flame / UV resistant, anti-microbial, 100% recyclable green product having lock click system with suitable skirting, having 2 mm underlay. Classification of abrasion resistance. All complete as per directions and instructions of engineer in charge.	Square meter	900	0	0	Yes
281	P/F19mm thick hardwood flooring over 2"x3" wooden section gridwork at 600mm c/c in both directions, resting on 12.5mm thick neoprene pads on stage floor, filled with fine river sand/ 48kg density glass wool, and covered with two layers of12.5mm thick waterproof ply, with staggered joints. Finished in 19mm thick hardwood as per architectural details.	Square meter	99	0	0	Yes
282	P/F acoustical doors for the Auditorium. The door to be fabricated with 12mm MDF board exterior grade of approved make veneer facing and finished with varnish on both side. The door will have insulation with one layer of 50mm th. 24 kg. Cu. M density fiberglass. The fiberglass should be supported with wooden batten of Kail wood frame work minimum 610mm X 610mm to avoid sagging. The door leaf will be fabricated using 100mm x 74mm th. Teakwood frame. The fixed door frame (Chowkhat) shall be Teakwood of size 125mm x 79mm, the door frame shall be provided on all four sides. The door will have hydraulic door closer, cross bar door handle and relevant hardware for fabrication and fixing. The door seal of rubber Magnetic type of to be provided all around of the door frame as shown in the drawing the door to be attached with the door frame by brass metal hinges with adequate strength and numbers to avoid sagging. All joints to be sealed with mastic sealant of approved make. Panic bars to be provided on each leaf of the doors. The doors on the auditorium side to be finished using non light reflective media like carpet of dull laminate/ veneer.	Square meter	60	0	0	Yes
					SUM: 0

-->

Item Code 1 Item Description 415V LT DG SET Supply, Installation, testing & Commissioning of 500 KVA Silent DG set along with 415V AC Power distribution board comprising of suitable engine coupled to 415V Stamford make alternator both mounted on common base frame with other standard accesies i.e. Fuel tank, Batteries with leads. On Mains failure the DG set shall be started by means of a switch on the control panel. UOM SET QUANTITY 2 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 2 Item Description Transformer - 630 KVA 11/0.433kVA Out door Oil Type Supplying/Receiving, Installation/Erection, Testing and Commissioning of 630kvA ONAN, Copper wound 11/0.433 KV, 50 C/S, Delta star connected, Dyn11 vector group, Oil immersed Outdoor transformer with Off Load circuit Tap changer for Voltage regulation from -10% to +15% in 7 steps of 1.25% on HV side complete with AVR and RTCC panel, including Bucholtz relay, MOG, Oil & Winding temperature alarm and trip contacts with wiring upto marshalling box, and all standard accesies as required, complete with Cable End box suitable for 1RX3C x 95sq.mm. 11 KV(UE) XLPE insulated Al. Ar. Cable at HT side and XLPE insulated Al. Busduct for LT side, including S/F of M.S. channel of size 100 x 50 x 6mm for foundation support for transformer, including Drying/filtration of oil of transformer and OLTC Enclousere.Connection with Tap Changing Mechanism etc. as per IS 2026-1977. Rate of SITC of 630kVA Transformer after analysis UOM SET QUANTITY 2 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 3 Item Description Transformer - 500 KVA 11/0.433kVA Out door Oil Type Supplying/Receiving, Installation/Erection, Testing and Commissioning of 500kvA ONAN, Copper wound 11/0.433 KV, 50 C/S, Delta star connected, Dyn11 vector group, Oil immersed Outdoor transformer with Off Load circuit Tap changer for Voltage regulation from -10% to +15% in 7 steps of 1.25% on HV side complete with AVR and RTCC panel, including Bucholtz relay, MOG, Oil & Winding temperature alarm and trip contacts with wiring upto marshalling box, and all standard accesies as required, complete with Cable End box suitable for 1RX3C x 95sq.mm. 11 KV(UE) XLPE insulated Al. Ar. Cable at HT side and XLPE insulated Al. Busduct for LT side, including S/F of M.S. channel of size 100 x 50 x 6mm for foundation support for transformer, including Drying/filtration of oil of transformer and OLTC Enclousere.Connection with Tap Changing Mechanism etc. as per IS 2026-1977. Rate of SITC of 500kVA Transformer after analysis UOM SET QUANTITY 1 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 4 Item Description LT Switchboard-1 (Indoor Type) Design, Fabrication, Supply, Erection,Testing and commissioning of Powder coated Main LT Switchboard fabricated out of 14 gauge CRCA sheet steel in cubical, compartmentalised, free standing floor /wall mounted, dust and vermin proof, (degree of protection IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval shall be taken for each panel before fabrication. (All hardware's like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification and LT Switchboard shall be comprising broadly of the following equipment's Incomer: 1000Amps, S.C.C 50kA for 1 Sec ACB (EDO) - 2 Nos. 1 Bus coupler 1000Amps, S.C.C 50kA for 1 Sec ACB Outgoing Feeders: 4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;400 Amps - 2 Nos. (35/36 kA S.C.C);250 Amps - 2 Nos. (35/36 kA S.C.C);160 Amps - 15 Nos. (35/36 kA S.C.C);100 Amps - 15 Nos. (25 kA S.C.C);Aluminium Bus 1000 Amps, S.C.C 40kA for 1 Sec;CT, PT, MCBs, Ammeter, Voltmeter with Selector Switches, Energy meter,indication lamps(On- Off Trip, Power On - RYB);630Amps Isolator, S.C.C 35kA for interconnection with DG Set;Supply, Testing, Installation & Commissioning of LT Switchboard (Indoor Type) UOM SET QUANTITY 1 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 5 Item Description LT Switchboard-2 for Quarters (Indoor Type) Design, Fabrication, Supply, Recontesting and commissioning of Powder coated Main LT Switchboard fabricated out of 14 gauge CRCA sheet steel in cubical, compartmentallised, free standing floor /wall mounted, dust and vermin proof, (degree ofprotection IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification and LT Switchboard shall be comprising broadly of the following equipments;Incomer each 800Amps, S.C.C 50kA for 1 Sec ACB (EDO);1 Buscoupler 800Amps, S.C.C 50kA for 1 Sec ACB;Outgoing Feeders:;4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;400 Amps - 2 Nos. (35/36 kA S.C.C);250 Amps - 2 Nos. (35/36 kA S.C.C);160 Amps - 15 Nos. (35/36 kA S.C.C);Aluminium Bus 800 Amps, S.C.C 40kA for 1 Sec;CT, PT, MCBs, Ammeter, Voltmeter with Selector Switches, Energy meter, indication lamps(On- Off Trip, Power On - RYB);Supply, Testing, Installation & Commisioning of LT Switchboard-2 for Quarters (Indoor Type) UOM SET QUANTITY 1 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 6 Item Description LIGHTING DISTRIBUTION BOARD FOR STREET LIGHTING (LDB). Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Lighting dist. Boards (LDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing, dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.;Each LDB shall broadly comprise of the following equipment/components);Incomer: 100A, 4 Pole, MCCB (P-2), 25kA S.C.C (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links - 1 No.;Outgoing feeders:;4 Pole, MCCB (P-2), (Ics=100%Icu) 16kA S.C.C Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;63A TPN MCCBs - 2 Nos.;63A TPN MCBs - 15 Nos.;Indication lamps(On- Off Trip Power On -- RYB),200 A aluminium bus, s.c.c 35 KA for 1s;This LDB shall cater power supply to all feeder pillars for campus lighting.;Supply, Testing, Installation & Commisioning cost of LDB. UOM SET QUANTITY 1 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 7 Item Description AC DISTRIBUTION BOARD;Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Aux.Power dist. Boards (Aux.PDB), fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing, dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)As per Specification.;Each ACDB shall broadly comprise of the following equipment/components);Incomer: 160A, 4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links - 1 Nos.;Outgoing feeders:;4 Pole, MCCB (P-2), (Ics=100%Icu) Breaking capacity (Variable thermal rating 80-100%, variable magnetic rating 6-10 times) with factory made silver plated copper spreading links;100A, TPN MCCBs - 2 Nos. (25kA S.C.C);63A TPN MCCBs - 6 Nos. (16kA S.C.C);Indication lamps(On- Off Trip Power On -- RYB), 300 A aluminium bus, s.c.c 35 KA for 1s;ACDB shall be provided for internal power distribution for control & auxiliaries of LT Substation & Switchyard equipments.;Supply, Testing, Installation & Commisioning cost of ACDB UOM SET QUANTITY 2 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 8 Item Description ESE Make: 3 Phase 415 VAC, 50Hz contract type 200 KVAR APFC standard specification with delta connected capacitor bank. UOM each QUANTITY 3 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 9 Item Description Public Address System UOM No QUANTITY 12 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 10 Item Description Transmitters UOM No QUANTITY 60 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 11 Item Description MAIN DESK- Top Panel: Made of 90mm Thick (41mm) using MDF and Veneer. Finish- PU Coating, Scratch Resistance 2H Leg: Made of 25mm thk using MDF and Veneer with PU coating. Modesty: Made of 16mm thk using MDF and Veneer with PU coating. ERU- Top Panel: Made of 25mm Thick (+imm) using MDF and Veneer. Finish- PU Coating, Scratch Resistance 2H Other Panel: Made of 18mm Thick (41mm) Pre-Lam Particle Board. Drawer base : Made of 8mm thick (41mm) Pre-Lam Particle Board. Castor: Dia - 40mm & height 55mm (6 no.s lockable) Finish- Veener with PU Coating 2DR/3DR PEDESTAL- Top Panel: Made of 25mm Thick (41mm) using MDF and Veneer Other Panel: Made of 18mm Thick (41mm) Pre-Lam Particle Board. Castor: Dia - 40mm & height 55mm (2 lockable & 2 unlockable) Finish- Veener with PU Coating. As per the direction of engineer-in-charge. UOM each QUANTITY 15 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 12 Item Description BACK UNIT- Top Panel: Made of 18mm Thick (£1mm) Pre-lam Particle Board. Finish: Veener with PU Side Panel : Made of 16mm Thick (41mm) Pre-lam Particle Board. Shelf Panel: Made of 22mm Thick (41mm) Pre-Lam Particle Board. Door Panel: Made of 18mm Thick (41mm) MDF Board. Upper door : Made up of 5mm thick Glass.As per the direction of engineer-in-charge. UOM each QUANTITY 85 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 13 Item Description The Main table shall be of size 2400 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. As per the direction of engineer-in-charge. UOM each QUANTITY 45 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 14 Item Description Back Unit Dimension- 2215 x 410 x 2000As per the direction of engineer-in-charge. UOM each QUANTITY 45 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 15 Item Description MAIN DESK-Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. As per the direction of engineer-in-charge. UOM each QUANTITY 35 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 16 Item Description MAIN DESK-Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Gromet provided on work surface for wire management. Modesty Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeonfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security. As per the direction of engineer-in-charge. UOM each QUANTITY 15 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 17 Item Description The main desk of shall be of size 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick MFC (Melamine Faced Chipboard) also there should be 30 mm MDF (Medium density fiberboard) black pad.The modesty panel shall be of 18 mm thick MFC (Melamine faced chipboard).The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad.The main table should be of duck noise profile edge in order to enhance the workspace aesthetics. The maestro return desk size shall be 1200 Width mm x 600 Depth mm x 730 Height mm.The top panel shall 25 mm thick MFC ( Melamine Faced Chipboard) .The Modesty panel shall be 18 mm thick MFC coated. The leg of the return desk shall be 25 mm thick MFC (Melamine faced chipboard) plus the right and left pad should be 30 mm thick MDF (medium density fiber ) coated. The Maestro Mobile Pedestal size shall be 400 Width mm x 560 Depth mm x 560 Height mm.The top panel shall be 25 mm thick MFC( Melamine Faced Chipboard) plus all the other panels shall be 18 mm thick coated with MFC (Melamine Faced Chipboard). In Mobile pedestal all other panels shall be of 18 mm thick MFC (Melamine Faced Chipboard).In Mobile pedestal lock and Castors shall be Provided. The handle shall be of Metal. The maestro joining table RHS shall be of size 1200 Width mm x 1050 Depth mm x 750 Height mm.The top panel shall be 25 mm thick with MFC (Melamine Faced Chipboard).The leg of the joining table shall be of metal.Pigmented Polyurethane Coated joining table. As per the direction of engineer-in-charge. UOM each QUANTITY 15 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 18 Item Description Book Case Unit of size 790 x 400 x 2200 made of 25mm Thick (±1mm) MDF Board with 2 side PU painted finish & hardness 2H. Leg:Made of metal tubes.As per the direction of engineer-in-charge. UOM each QUANTITY 90 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 19 Item Description Back Unit of size 1400 x 470 x 760 made of 25mm Thick (±1mm) MDF Board with 2 side PU painted finish & hardness 2H. Leg:Made of metal tubes. As per the direction of engineer-in-charge. UOM each QUANTITY 35 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 20 Item Description Desk With ERU LHS size shall be 2100 Width mm x 1600 Depth mm x 765 Height mm .The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm.The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top .Also there shall be 0.35 mm PVC lipping on frame.The Modesty panel shall be 1100 x 405 x 46 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping.The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish).As per the direction of engineer-in-charge. UOM each QUANTITY 15 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 21 Item Description Table of size 1500 x 750 x 740 TABLE TOP The panel is made from 25 $0.5 mm THK Pre Laminated Boards as per lS?12823 with 2 mm Thick PVC beading on all sides SIDE PANEL -The panel is made from 25 $0.5 mm THK Pre Laminated Boards as per lS?12823 with 2 mm Thick PVC beading on user sides and 0.8 mm on Top & Bottom side. The side panels have 2 glide screws each for leveling of the desk. MODESTY PANEL -The panel is made from 18 $0.5 mm THK Pre Laminated Boards as per lS-12823 with 0.8 mm Thick PVC beading on all edges.FREE STANDING PEDESTAL- The free standing pedestal is made from 18 :05 mm THK Pre Laminated Boards as per lS-12823 with combination of 2mm & 0.8 mm Thick PVC. As per the direction of engineer-in-charge. UOM each QUANTITY 80 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 22 Item Description OFFICE TABLE Office Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18 mm thick Pre Laminated top size 1365 X 680 X 735 (Approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with both side drawer lock. As per the direction of engineer-in-charge. UOM each QUANTITY 75 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 23 Item Description Table 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. As per the direction of engineer-in-charge. UOM each QUANTITY 86 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 24 Item Description Office Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side one drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. As per the direction of engineer-in-charge. UOM each QUANTITY 86 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 25 Item Description Study Table Study Table made of 15mm MDF for table/drawer front 14mm MDF for inner drawer left & right. 3mm for drawer bottom,15mm PB for other panels,0.18mm PVC vacuum laminating for surface of table top and drawer front, 0.4mm lippingfor other panels. Load bearing capacity (table top):35 Kg. Construction: Knock down fitting Dimension- 1000L x 480 W x720H. As per the direction of engineer-in-charge. UOM each QUANTITY 90 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 26 Item Description Computer Table Model Companion C-2 size 1200 (W) x 600 (D) x 750 (H) made of 18mm thick Pre-Laminated Board with PVC edge banding. Panel of 18mm thick Pre-Laminated Board with Single extrusion slide for Key Board fitted with 4 Nos. Caster. As per the direction of engineer-in-charge. UOM each QUANTITY 125 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 27 Item Description Table Size-600W x 450D x 750H mm Compact and easy to use . There is enough space to accommodate a printer shelf and CD rack. small, but truly luxurious in space.Top made-up of 1.5 cm Medium Density Fiber. All the other panels are made of Particle board. Vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels. As per the direction of engineer-in-charge. UOM each QUANTITY 75 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 28 Item Description Reception Table Double Arch with DL Top of size 2410 x 1065 x 725-Worksurface, 1035-Counter, D L Top Top-Clean matt PU finish 18mm thick Inside radius 700.0 Mm Outside radius ? 1350.0 mm Depth ? 650 mm Glass-Frosted Glass 10mm thick Diamond cut finishing on edges Inside Radius ? 1202.5mm Outside radius ? 1402.5mm Depth ? 200mm, Modesty Panel-MS Perforated sheet Below Worksurface : 0.8 mm (thick) x 665.0 mm (height) x 1345.0 mm (flat length) Above Worksurface : 0.8mm (Thick) x 260 mm (height) x 1345.0 mm (flat length), Legs-MS tube 1.6 mm thick Diameter 50.8 mm Height 604 mm. As per the direction of engineer-in-charge. UOM each QUANTITY 10 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 29 Item Description Conference Table-Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. As per the direction of engineer-in-charge. UOM each QUANTITY 15 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 30 Item Description Conference Table-Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. As per the direction of engineer-in-charge. UOM each QUANTITY 10 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 31 Item Description HIGH BACK CONFERENCE CHAIR WITH FIX BACK, FIX SEAT & FIX ARMREST- SEAT/BACK ASSEMBLY:The seat is made up of 1.2 +0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back is made up 1.2 +0.1cm. thick hot pressed plywood measured as per QA method describedin OCP-OQLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. HIGH BACK SIZE 48cm.(W) X 76.0cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM:The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 + 2 kgf as per 1S:7888 for 25% compression.ARMREST(FIXED)-The armrest top is moulded from polyurethane (PU) and moulded on to a fixed type tubular armrest support made of @3.8140.03 cm x 0.240.01 cm thk M.S. E.R.W tube having chrome plated finish. KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT MECHANISM. The mechanism is designed with the following features 360° revolving type, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features: 360° revolving type. Single point control. Front pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment. 4-position locking with anti-shock feature.FIXED SPINE The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 40.05 cm thk HR Steel andiis black powder-coated ( DFT 40-60 microns). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0£0.3 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. As per the direction of engineer-in-charge. UOM each QUANTITY 300 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 32 Item Description Very High Back Chair SEAT/BACK ASSEMBLY: The seat is made up of 1.2 1 0.10m. thick hot pessed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with leather and moulded . Polyurethane Foam. The back foam is designed with contoured lumber support for extra comfort. The chair is available in three models SIZE: 53.0cm.(W) X 95.4cm.(H), SEAT SIZE: 54.6cm.(W) X 49.00m.(D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness load 16 i 2 kgf as per IS:7888 for 25% compression. SEAT-BACK CONNECTING SPINE:The seat and back are arrested together with ?spine made of 0.8, 10.05 cm thk HR Steel and is black powder-coated ( DFT 40?60 microns ). ARMREST ASSY: The armrest assy. comprises of three parts viz. the armrest support tube and P.U.armrest and the armrest top. The armrest tube assy. is made of 2.54:0.03cm x 0.16:0.0128cm M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with MS. insert. The armrest top is made of ABS & upholstered with foam & leather.Static seat depth adjustment = 5.0 i 0.5cm with 5 position locking.PNEUMATIC HEIGHT ADJUSTMENT: it has an adjustment stroke of PNEUMATIC HEIGHT ADJUSTMENT (for PCH-9202RV): it has an adjustment stroke of 12.0 .TELESCOPIC BELLOW ASSEMBLY (for PCH-9202RV): The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSY: The pedestal is made of die-cast aluminium with buf?ng finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 i 0.5cm pitch~center dia. (77.0 i 1.00m with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. As per the direction of engineer-in-charge. UOM each QUANTITY 160 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 33 Item Description Very High back chair with headrest- SEAT/BACK ASSEMBLY: The seat is made up of hot pressed moulded reconstituted wood of 1.240.1cm thickness and backis two part injection moulded plastic.SEAT SUB ASSEMBLYSIZE: 49.0cm (W) X 49.5cm (D), BACK SUB ASSEMBLYSIZE: (HIGH BACK): 46.0 cm (W) X 57.0 em (H)., HEAD REST SUB ASSEMBLYSIZE: 26.0cm (W) X 12.0 cm (L) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam is moulded with Density = 45 kg/m* and Hardness load 16 + 2 kgf as per 1S:7888 for 25% compression. ARMRESTS -The armrests are Pressure die casted in polished Aluminium with PP Arm, Tops. PNEUMATIC HEIGHT ADJUSTMENT-The pneumatic height adjustment has an adjustment stroke of 10.0 t0.3cm. ADJUSTABLE BACK SUPPOR: The backrest is connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0£0.5cm for the comfortable back support to suitable individual need. PEDESTAL ASSEMBLY(FOR SE 00/01/02TX }: The pedestal is Pressure Die cast polished Aluminium and fitted with 5 nos. twin-wheel castors. The pedestal is 65.0£0.5cm.pitch-centre-dia.(75.0 1.0cm. with castors). HEADREST -The headrest assembly is consist of Leather upholstered and inner with PU foam with density =45 kg/m®. It has swiveling movement. As per the direction of engineer-in-charge. UOM each QUANTITY 50 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 34 Item Description Full Back Chair with Head Rest Seat/Back Assembly: The Cushioned seat assembly consists of seat outer (material-30% Glass Fiber Nylon) & upholstered Seat inner (material-Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back is mad up of Back outer (material-Glass Fiber Filled Nylon) & Back inner (material-PP) and upholstered using Polyester Mesh Fabric with high tenacity yarn. with The Active Bio-Synchro mechanism automatically adjusts the tilt tension based on user?s body weight. On reclining, the seat glides backward and provides uninterrupted back support thereby increasing seating comfort.The chair back is ergonomically contoured and has a wide back form. The bio flex lumbar support made from engineered plastic is flexible yet provides firm support to the back. The structural mesh allows free movement of air eliminating odour. As per the direction of engineer-in-charge. UOM each QUANTITY 450 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 35 Item Description Fabric upholstery, Adjustable Armrests, Knee Tilt Synchro Mechanism, Nylon Pedestal. As per the direction of engineer-in-charge. UOM each QUANTITY 200 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 36 Item Description Half Mesh and Half Fabric Back Upolstery, Adjustable Armrests, Knee Tilt Synchro Mechanism, Nylon Pedestal. As per the direction of engineer-in-charge. UOM each QUANTITY 120 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 37 Item Description HIGH BACK CHAIR WITH SEAT DEPTH ADJUSTMENT- SEAT ASSEMBLY The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 4542 kg/m,and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.The stitched cover is made from spacer fabric and leatherette Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.940.03cm x 0.16 +0.0128cm. it upholstered with spacer fabric and leatherette, BACK SIZE : 45 cm. (W) x 75.5 cm. (D), Armrest- The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of @3.8140.03 cm x 0.240.01 cm thk MS E.R.W tube. The armrest height adjustable up fo 6.540.5cm in 5 steps.The Armrest structure is powder coated (DFT 40-60 micron)., Pedestal Assembly- The pedestal is injection moulded ip-biSck\33% giass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal \| 1205 om. pit h-center dia.(76.1+1.0 cm. With castors.). As per the direction of engineer-in-charge. UOM* each QUANTITY 120 Rate GST (%) GST Value 0 Estimated Cost (Inclusive of GST) 0 Mandatory Item Yes
Item Code 38 Item Description SEAT/BACK ASSEMBLY: The seat/back are made up of 1.2 +0.1cm. thick hot pressed plywood (measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. PCH-7000 HIGH BACKSIZE 56.0 cm. (W) x 88.0 cm. (H) PCH-7000 SEAT SIZE 56.0 cm. (W) x 49.0 cm. (D), HIGH RESILIENCE	Sum(Estimated Cost (Inclusive of GST)): 0 ()

Created By : Mr Om Prakash (CHIEF ENGINEER)

Created On : 25-06-2024 04:02 PM

Payment Type EMD Amount 22287000 Payment Mode Internet Payment Gateway(IPG),Challan\|Bank Guarantee Payment Currency INR Exemption Allowed/Disallowed N Exemption Reason
Payment Type Tender Fee Amount 10000 Payment Mode Internet Payment Gateway(IPG),Challan\| Payment Currency INR Exemption Allowed/Disallowed N Exemption Reason
Payment Type Tender Processing Fee Amount 5900 Payment Mode Internet Payment Gateway(IPG),Challan\| Payment Currency INR Exemption Allowed/Disallowed N Exemption Reason