| 1705053495000 | 0 | None | None | Buildings | Construction of Community and Public and Aspirational Toilet in Gangavathi city limits | 15932919.66 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2131557 | 62627 | None | code001 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work PWD CSR 2023-24, Vol-I, P. No. 8, I. No. 1.14.1 | Cum | 107.1 | 107.1 | 319.91 | False | None | None | False | None | False | 34262.361 | 0 | | 2131558 | 62627 | None | code002 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.1.3 | Cum | 6288.45 | 6288.45 | 79.63 | False | None | None | False | None | False | 500749.2735 | 0 | | 2131559 | 62627 | None | code003 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD CSR 2023-24, Vol-II, P. No. 9, I. No. 5.4 | Cum | 6708.45 | 6708.45 | 94.81 | False | None | None | False | None | False | 636028.1445 | 0 | | 2131560 | 62627 | None | code004 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 300.99 | False | None | None | False | None | False | 84066.507 | 0 | | 2131561 | 62627 | None | code005 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.4.2 | Cum | 9958.73 | 9958.73 | 51.97 | False | None | None | False | None | False | 517555.1981 | 0 | | 2131562 | 62627 | None | code006 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.5.1 | Cum | 11138.4 | 11138.4 | 29.04 | False | None | None | False | None | False | 323459.136 | 0 | | 2131563 | 62627 | None | code007 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - For Buildings PWD CSR 2023-24, Vol-I, P. No. 18, I. No. 2.11a | Tonne | 93929.85 | 93929.85 | 8.3483 | False | None | None | False | None | False | 784154.566755 | 0 | | 2131564 | 62627 | None | code008 | Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer,
including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes including cost of materials, labour, usage
charges of machinery complete as per specifications and as per directions
of the Engineer-in-Charge. PWD CSR 2023-24, Vol-II, P. No. 82, I. No. 11.16.1 | Kg | 142.8 | 142.8 | 6562.52 | False | None | None | False | None | False | 937127.856 | 0 | | 2131565 | 62627 | None | code009 | Providing & fixing corrugated G.S. sheet roofing including vertical /
curved surface fixed with polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead, including a coat of approved steel primer
and two coats of approved paint on overlapping of sheets complete as
per design drawings (up to any pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins, rafters and trusses and including
cutting to size and shape wherever required as per the direction of
Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m² PWD CSR 2023-24, Vol-II, P. No. 21, I. No. 7.1.1 | Sqm | 922.95 | 922.95 | 686.8 | False | None | None | False | None | False | 633882.06 | 0 | | 2131566 | 62627 | None | code010 | Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x150x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications. PWD CSR 2023-24, Vol-II, P. No. 17, I. No. 6.33 | Sqm | 1292.55 | 1292.55 | 584.43 | False | None | None | False | None | False | 755404.9965 | 0 | | 2131567 | 62627 | None | code011 | Providing Half brick masonry with common burnt clay Non Modular bricks
of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1
cement : 4 coarse sand) including cost of all materials, labour, scaffolding
and usage charges of machinery & other incidental charges complete as
per the direction of engineer incharge of work. . PWD CSR 2023-24, Vol-II, P. No. 14, I. No. 6.13 | Sqm | 1024.8 | 1024.8 | 410.85 | False | None | None | False | None | False | 421039.08 | 0 | | 2131568 | 62627 | None | code012 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials,
labour, curing complete as per specifications and as per directions of
Engineer-in-charge.PWD CSR 2023-24, Vol-II, P. No. 41, I. No. 8.1.2 | Sqm | 253.05 | 253.05 | 1622.06 | False | None | None | False | None | False | 410462.283 | 0 | | 2131569 | 62627 | None | code013 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. PWD CSR 2023-24, Vol-II, P. No. 41, I. No. 8.2.1 | Sqm | 309.75 | 309.75 | 869.99 | False | None | None | False | None | False | 269479.4025 | 0 | | 2131570 | 62627 | None | code014 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) PWD CSR 2023-24, Vol-II, P. No. 46, I. No. 8.33.1 | Sqm | 165.9 | 165.9 | 2924.73 | False | None | None | False | None | False | 485212.707 | 0 | | 2131571 | 62627 | None | code015 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. PWD CSR 2023-24, Vol-II, P. No. 60, I. No. 9.10 | Sqm | 1161.3 | 1161.3 | 393.07 | False | None | None | False | None | False | 456472.191 | 0 | | 2131572 | 62627 | None | code016 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023-24, Vol-II, P. No. 71, I. No. 10.14 | Sqm | 1161.3 | 1161.3 | 606.0 | False | None | None | False | None | False | 703747.8 | 0 | | 2131573 | 62627 | None | code017 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications PWD CSR 2023-24, Vol-II, P. No. 85, I. No. 11.28 | Kg | 593.25 | 593.25 | 766.97 | False | None | None | False | None | False | 455004.9525 | 0 | | 2131574 | 62627 | None | code018 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. PWD CSR 2023-24, Vol-II, P. No. 86, I. No. 11.34B | Kg | 192.15 | 192.15 | 2945.25 | False | None | None | False | None | False | 565929.7875 | 0 | | 2131575 | 62627 | None | code019 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance Plus or minus1mm), with wall thickness 2.0 mm ( Plus or minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( Plus or minus0.1 mm) wall thickness and 3 nos.
stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.83.2 | Mtr | 250.95 | 250.95 | 586.6 | False | None | None | False | None | False | 147207.27 | 0 | | 2131576 | 62627 | None | code020 | Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 111, I. No. 12.92 | Sqm | 6557.25 | 6557.25 | 210.3 | False | None | None | False | None | False | 1378989.675 | 0 | | 2131577 | 62627 | None | code021 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm diasteel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge. PWD CSR 2023-24, Vol-II, P. No. 77, I. No. 11.3 | Sqm | 8689.8 | 8689.8 | 40.41 | False | None | None | False | None | False | 351154.818 | 0 | | 2131578 | 62627 | None | code022 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer in
Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.32.2 | m | 397.95 | 397.95 | 660.0 | False | None | None | False | None | False | 262647.0 | 0 | | 2131579 | 62627 | None | code023 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023-24, Vol-II, P. No. 123, I. No. 13.34 | l | 9.45 | 9.45 | 24000.0 | False | None | None | False | None | False | 226800.0 | 0 | | 2131580 | 62627 | None | code024 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 100 mm diameter PWD CSR 2023-24, Vol-II, P. No. 125, I. No. 13.48 | Mtr | 305.55 | 305.55 | 344.4 | False | None | None | False | None | False | 105231.42 | 0 | | 2131581 | 62627 | None | code025 | Providing, laying and jointing HDPE pipes of specified grade and
conforming to IS 4984-2016 with latest ammendments and conveying
to work site including loading and unloading at both destinations and
rolling and lowering into trenches, laying true to line and jointing of
pipes and specials with electrofusion welding, giving hydraulic test
as per relevant ISS with all lead and lifts including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excation, testing and commissioning. The
rate is exclusive of required specials and fittings wherever necessary
like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete
(Contractor will make his own arrangements for procuring water for
testing) etc. complete. NOTE: Upto 110mm dia Coil shall be HDPE Grade PE80-PN6.0 160mm dia PWD CSR 2023-24, Vol-V, P. No. 95, I. No. 9.1.7 | Mtr | 1006.95 | 1006.95 | 440.0 | False | None | None | False | None | False | 443058.0 | 0 | | 2131582 | 62627 | None | code026 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete PWD CSR 2023-24, Vol-II, P. No. 127, I. No. 13.59 | Each | 231.0 | 231.0 | 141.0 | False | None | None | False | None | False | 32571.0 | 0 | | 2131583 | 62627 | None | code027 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm (PWD CSR 2023-24, Vol-II, P. No. 202, I. No. 20.44.2) | Each | 3724.35 | 3724.35 | 94.0 | False | None | None | False | None | False | 350088.9 | 0 | | 2131584 | 62627 | None | code028 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid PWD CSR 2023-24, Vol-II, P. No. 131, I. No. 14.3.1 | Each | 6275.85 | 6275.85 | 26.0 | False | None | None | False | None | False | 163172.1 | 0 | | 2131585 | 62627 | None | code029 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD CSR 2023-24, Vol-II, P. No. 132, I. No. 14.7.1 | Each | 3236.1 | 3236.1 | 15.0 | False | None | None | False | None | False | 48541.5 | 0 | | 2131586 | 62627 | None | code030 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm (PWD CSR 2023-24, Vol-II, P. No. 136, I. No. 14.32.4) | Each | 1812.3 | 1812.3 | 15.0 | False | None | None | False | None | False | 27184.5 | 0 | | 2131587 | 62627 | None | code031 | Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy PWD CSR 2023-24, Vol-II, P. No. 144, I. No. 14.85a | Each | 1833.3 | 1833.3 | 15.0 | False | None | None | False | None | False | 27499.5 | 0 | | 2131588 | 62627 | None | code032 | Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2022 with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. Aluminium Alloy Plate for Over Head Sign (PWD CSR 2023-24, Vol-II, P. No. 136, I. No.8.9) | Sqm | 6108.9 | 6108.9 | 26.0 | False | None | None | False | None | False | 158831.4 | 0 | | 2131589 | 62627 | None | code033 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick (P.no.2.it.no.1.1.1) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 72.45 | 72.45 | 450.0 | False | None | None | False | None | False | 32602.5 | 0 | | 2131590 | 62627 | None | code034 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box (P.no.2.it.no.1.5) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 51.45 | 51.45 | 32.0 | False | None | None | False | None | False | 1646.4 | 0 | | 2131591 | 62627 | None | code035 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8" x 6" x 3" (203 x 152 x 76 mm) (P.no.3.it.no.1.6.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 90.3 | 90.3 | 28.0 | False | None | None | False | None | False | 2528.4 | 0 | | 2131592 | 62627 | None | code036 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 66.15 | 66.15 | 645.0 | False | None | None | False | None | False | 42666.75 | 0 | | 2131593 | 62627 | None | code037 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. (P.no.9.it.no.3.6.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 174.3 | 174.3 | 98.0 | False | None | None | False | None | False | 17081.4 | 0 | | 2131594 | 62627 | None | code038 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (P.no.9.it.no.3.8) (PWD CSR for Electrical Works for the Year 2023-24) | Sq CM | 0.43 | 0.43 | 13000.0 | False | None | None | False | None | False | 5590.0 | 0 | | 2131595 | 62627 | None | code039 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps (P.no.10.it.no.5.7.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 253.05 | 253.05 | 28.0 | False | None | None | False | None | False | 7085.4 | 0 | | 2131596 | 62627 | None | code040 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP .(p.no.17.it.no.5.18.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 775.95 | 775.95 | 13.0 | False | None | None | False | None | False | 10087.35 | 0 | | 2131597 | 62627 | None | code041 | PVC Batten with LED Tubes Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w (p.no.43.it.no.11.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 724.5 | 724.5 | 100.0 | False | None | None | False | None | False | 72450.0 | 0 | | 2131598 | 62627 | None | code042 | Lamp Holder Supplying & Fixing of 70-150 Watts lamp holder 2 Pin (p.no.52.it.no.12.46) (PWD CSR for Electrical Works for the Year 2023-24) | No | 66.15 | 66.15 | 123.0 | False | None | None | False | None | False | 8136.45 | 0 | | 2131599 | 62627 | None | code043 | Fixing all type of Luminaries Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders (p.no.56.it.no.13.7.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 128.1 | 128.1 | 123.0 | False | None | None | False | None | False | 15756.3 | 0 | | 2131600 | 62627 | None | code044 | Supplying,fixingandwiringElectronicTrivectorMeter(ETV)5to32/63Athreephase4wirewholecurrentclass-1AccuracyEnergyMeter. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.5.35) | Each | 5990.25 | 5990.25 | 12.0 | False | None | None | False | None | False | 71883.0 | 0 | | 2131601 | 62627 | None | code045 | Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall-roundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia . (PWD CSR for Electrical Works for the Year 2023-24 P.no.54.it.no.12.56) | Each | 3685.5 | 3685.5 | 13.0 | False | None | None | False | None | False | 47911.5 | 0 | | 2131602 | 62627 | None | code046 | Constructing masonry Chamber 30x30x50 cm inside, in brick
work in cement mortar 1:4 (1 cement :4 coarse sand) with C.
I. surface box 100x100 x75 mm (inside) with hinged cover fixed in
cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), i/c necessary excavation,
foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone
aggregate 40mm nominal size ) and inside plastering with cement
mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with
a floating coat of neat cement complete as per standard design :
With common burnt clay (non modular) bricks of class designation 3.5. (PWD CSR 2023-24 P.no.125.it.no.13.51) | Each | 1791.3 | 1791.3 | 44.0 | False | None | None | False | None | False | 78817.2 | 0 | | 2131603 | 62627 | None | code047 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m PWD SR 2023-24 Vol:1 P.NO.10 I.No:1.17.1 | Cum | 275.1 | 275.1 | 87.93 | False | None | None | False | None | False | 24189.543 | 0 | | 2131604 | 62627 | None | code048 | Refilling available earth around trenches/pipelines, cables in layers not
exceeding 20 cms in depth, compacting each deposited layer by ramming afterwatering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications PWD SR 2023-24 Vol:1 P.NO.7 I.No:1.10 | Cum | 168.0 | 168.0 | 81.61 | False | None | None | False | None | False | 13710.48 | 0 | | 2131605 | 62627 | None | code049 | Geophysical investigation at site for sinking borewells for Providing
drinking water to the habitation either through the Hand Pump MWS
or P.W.S.S, by vertical electrical sounding by adopting Venner or
Schlumbergers's method, including reconnaissance survey of geological
formation. Geophysical investigation of existing ground water in the
vicinity, its quality, quantity and acceptability of the users, indicating
the location of the site, recommended depth of casing pipe required to
seal the top unconsolidated formation including an extra depth of 1.0
metre in consolidated formation for proper seating of casing pipe, depth
of drilling required to cover full depth of aquifer proposed to be tapped,
probable yield and other information required including transportation
of instruments and accessories to work site, engaging technical personal
and labour required etc. NOTE: 1) Additional rate on item 1&2 is
allowed for drilling in over burden and fixing Casing pipes beyond 20
M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%,
b) Above 30 M - 30% (Measurement of overburden is restricted to the
depth of casing pipe fixed excluding initial depth of 20M and projection
above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry
Borewell towards yield test. etc. complete. | Each | 5552.4 | 5552.4 | 10.0 | False | None | None | False | None | False | 55524.0 | 0 | | 2131606 | 62627 | None | code050 | Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 0 to 50 m | Mtr | 324.45 | 324.45 | 500.0 | False | None | None | False | None | False | 162225.0 | 0 | | 2131607 | 62627 | None | code051 | Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 50 to 100 m Borewell depth of 0 to 50 Mtrs | Mtr | 406.85 | 406.85 | 98.0 | False | None | None | False | None | False | 39871.3 | 0 | | 2131608 | 62627 | None | code052 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.PVC pipes of 6 Kg/cm2 for 140mm(3.097) | Each | 359.1 | 359.1 | 180.0 | False | None | None | False | None | False | 64638.0 | 0 | | 2131609 | 62627 | None | code053 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter Upto 3 HP pumps | Each | 6825.0 | 6825.0 | 10.0 | False | None | None | False | None | False | 68250.0 | 0 | | 2131610 | 62627 | None | code054 | Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. | Each | 1207.5 | 1207.5 | 10.0 | False | None | None | False | None | False | 12075.0 | 0 | | 2131611 | 62627 | None | code055 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)
suitable for bore well confirming to IS 8034-2000 specifications, to work
site with testing of as per instructions of engineer incharge of work and latest amendment etc. complete.12 STG PWD SR 2023-24 Vol:5 P.NO.149 I.No:13.6.3 | Each | 15241.8 | 15241.8 | 10.0 | False | None | None | False | None | False | 152418.0 | 0 | | 2131612 | 62627 | None | code056 | Supply and delivery at site Brand new best make PVC insulated cable of
Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990
with ISI Mark and as per its latest amendments. 1x3x4 Sqm PWD SR 2023-24 Vol:5 P.NO.154 I.No:13.22.3 | Mtr | 141.75 | 141.75 | 600.0 | False | None | None | False | None | False | 85050.0 | 0 | | 2131613 | 62627 | None | code057 | Providing main connection from pole PVC insulated sheathed steel wire
cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI
mark from KPTCL pole to meter board unit. 13.37 PWD SR 2023-24 Vol:5 P.NO.156 I.No:13.37 | Mtr | 89.25 | 89.25 | 500.0 | False | None | None | False | None | False | 44625.0 | 0 | | 2131614 | 62627 | None | code058 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete For: PVC pipes 25mm dia, 10 kg/sqcm & class 5 PWD SR 2023-24 Vol:5 P.NO.113 I.No:10.1.1 | Mtr | 50.4 | 50.4 | 587.0 | False | None | None | False | None | False | 29584.8 | 0 | | 2131615 | 62627 | None | code059 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with
bracket blades complete for light duty suitable to operate on 230V
50Hz, AC Supply | Each | 1492.0 | 1492.0 | 88.0 | False | None | None | False | None | False | 131296.0 | 0 | | 2131616 | 62627 | None | code060 | Fixing one exhaust fan after making a suitable notch in the wall and
finishing with cement mortar and colouring to match the existing wall
or brackets, with bolts and nuts and a 5 A, ceiling rose with
sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of
approved make with wire mesh and wooden frame | Each | 742.35 | 742.35 | 72.0 | False | None | None | False | None | False | 53449.2 | 0 | | 2131617 | 62627 | None | code061 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Vol III Page no: 17 item no: 3.6) | Sqm | 517.65 | 517.65 | 243.0 | False | None | None | False | None | False | 125788.95 | 0 | | 2131618 | 62627 | None | code062 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)(Vol III Page no: 51 item no: 6.8.2) | Sqm | 1121.4 | 1121.4 | 810.0 | False | None | None | False | None | False | 908334.0 | 0 | | 2131619 | 62627 | None | code063 | Dismantling of existing structures like culverts, bridges, retaining
walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever
necessary, sorting the dismantled material, disposal of unserviceable
material and stacking the serviceable material with all lifts and lead Dismantling Brick in Cement mortar | Cum | 640.5 | 640.5 | 27.26 | False | None | None | False | None | False | 17460.03 | 0 | | 2131620 | 62627 | None | code064 | Dismantling of existing structures like culverts, bridges, retaining
walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever
necessary, sorting the dismantled material, disposal of unserviceable
material and stacking the serviceable material with all lifts and lead Dismantling Stone Masonry Rubble stone masonry in cement mortar. | Cum | 640.5 | 640.5 | 8.1 | False | None | None | False | None | False | 5188.05 | 0 | | 2131621 | 62627 | None | code065 | Demolishing cement concrete manually/ by mechanical means including
disposal of material to the appropriate disposal area as per direction of
Engineer-in-charge. | Cum | 1746.15 | 1746.15 | 13.5 | False | None | None | False | None | False | 23573.025 | 0 | | 2131622 | 62627 | None | code066 | Dismantling wood work in frames, trusses, purlins and rafters upto 10
metres span and 5 metres height including stacking to the appropriate
disposal area as per direction of Engineer-in-charge. | Cum | 3054.45 | 3054.45 | 0.32 | False | None | None | False | None | False | 977.424 | 0 | | 2131623 | 62627 | None | code067 | Dismantling tile work in floors and roofs laid in cement mortar includ ing stacking material to the appropriate disposal area as per direction
of Engineer-in-charge. | Sqm | 50.4 | 50.4 | 96.0 | False | None | None | False | None | False | 4838.4 | 0 | | 2131624 | 62627 | None | code068 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.1.3 | Cum | 6288.45 | 6288.45 | 15.72 | False | None | None | False | None | False | 98854.434 | 0 | | 2131625 | 62627 | None | code069 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.2.1 | Cum | 6601.35 | 6601.35 | 0.74 | False | None | None | False | None | False | 4884.999 | 0 | | 2131626 | 62627 | None | code070 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.4.2 | Cum | 9958.72 | 9958.72 | 9.15 | False | None | None | False | None | False | 91122.288 | 0 | | 2131627 | 62627 | None | code071 | Providing Brick work with Non Modular fly ash bricks conforming to IS:12894, class designation 5.0 average compressive strength in super structure above plinth level up to floor I level in Cement mortar 1:6 (1cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD CSR 2023-24, Vol-II, P. No. 13, I. No. 6.25 | Cum | 8008.35 | 8008.35 | 27.95 | False | None | None | False | None | False | 223833.3825 | 0 | | 2131628 | 62627 | None | code072 | Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS :12894, in super structure above plinth and upto floor I level cement mortar 1 : 3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.. . PWD CSR 2023-24, Vol-II, P. No. 13, I. No. 6.29 | Sqm | 1037.4 | 1037.4 | 58.55 | False | None | None | False | None | False | 60739.77 | 0 | | 2131629 | 62627 | None | code073 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD CSR 2023-24, Vol-II, P. No. 41, I. No. 8.4.2 | Sqm | 327.6 | 327.6 | 312.27 | False | None | None | False | None | False | 102299.652 | 0 | | 2131630 | 62627 | None | code074 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD CSR 2023-24, Vol-II, P. No. 42, I. No. 8.7 | Sqm | 384.3 | 384.3 | 120.4 | False | None | None | False | None | False | 46269.72 | 0 | | 2131631 | 62627 | None | code075 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. PWD CSR 2023-24, Vol-II, P. No. 63, I. No. 9.24 | Sqm | 2994.6 | 2994.6 | 14.6 | False | None | None | False | None | False | 43721.16 | 0 | | 2131632 | 62627 | None | code076 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels - Area of slab over 0.50 m2 PWD CSR 2023-24, Vol-II, P. No. 69, I. No. 10.1.2 | Sqm | 4133.85 | 4133.85 | 5.76 | False | None | None | False | None | False | 23810.976 | 0 | | 2131633 | 62627 | None | code077 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.84 | Sqm | 5274.15 | 5274.15 | 0.54 | False | None | None | False | None | False | 2848.041 | 0 | | 2131634 | 62627 | None | code078 | Water proofing materials | Kg | 46.2 | 46.2 | 50.0 | False | None | None | False | None | False | 2310.0 | 0 | | 2131635 | 62627 | None | code079 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length, 20mm NB PWD CSR 2023-24, Vol-II, P. No. 118, I. No. 13.8.2.2 | Nos | 115.5 | 115.5 | 10.0 | False | None | None | False | None | False | 1155.0 | 0 | | 2131636 | 62627 | None | code080 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 100 mm diameter PWD CSR 2023-24, Vol-II, P. No. 118, I. No. 13.9.1 | Nos | 269.85 | 269.85 | 10.0 | False | None | None | False | None | False | 2698.5 | 0 | | 2131637 | 62627 | None | code081 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.32.3 | m | 500.85 | 500.85 | 30.0 | False | None | None | False | None | False | 15025.5 | 0 | | 2131638 | 62627 | None | code082 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.33.4 | m | 390.6 | 390.6 | 30.0 | False | None | None | False | None | False | 11718.0 | 0 | | 2131639 | 62627 | None | code083 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. (P.no.9.it.no.3.6.9) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 326.0 | 326.0 | 4.0 | False | None | None | False | None | False | 1304.0 | 0 | | 2131640 | 62627 | None | code084 | KEB Meter Charges (Metere Charges will be paid to Contractors as Based on the Actual Gescom Bill) | Job | 6000.0 | 6000.0 | 11.0 | False | None | None | False | None | False | 66000.0 | 0 |
|