| 1706359885000 | 0 | None | None | Buildings | Package-20 1.Construction of Government Higher primery School Class room and other development work at Hucchangipura 2.Construction of class room in Government Higher primery School at Hucchangipura 3.Construction of class room in Government Higher primery School at Hucchangipura in jagalur Taluk | 7850807.4 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2316979 | 68376 | None | 1.14.1PWD | Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting
out, shoring, strutting, barricading, caution lights, including dressing of
excavated surfaces, disposing off or levelling the excavated earth or sorting
& stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5
m including cost of labour, tools, usage of machinery & other appurtenaces
required to complete the work | Cum | 102.0 | 102.0 | 63.3 | False | None | None | False | None | False | 6456.6 | 0 | | 2316980 | 68376 | None | 2.1.2PWD | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5664.0 | 5664.0 | 8.15 | False | None | None | False | None | False | 46161.6 | 0 | | 2316981 | 68376 | None | 2.2.1PWD | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6287.0 | 6287.0 | 20.05 | False | None | None | False | None | False | 126054.35 | 0 | | 2316982 | 68376 | None | 2.2.1PWD | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 628.7 | 628.7 | 11.31 | False | None | None | False | None | False | 7110.597 | 0 | | 2316983 | 68376 | None | 2.5.2PWD | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6843.0 | 6843.0 | 196.45 | False | None | None | False | None | False | 1344307.35 | 0 | | 2316984 | 68376 | None | 2.5.2PWD | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 3079.35 | 3079.35 | 1.5 | False | None | None | False | None | False | 4619.025 | 0 | | 2316985 | 68376 | None | 2.5.2PWD | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 4105.8 | 4105.8 | 29.34 | False | None | None | False | None | False | 120464.172 | 0 | | 2316986 | 68376 | None | 2.5.2PWD | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 3421.5 | 3421.5 | 114.89 | False | None | None | False | None | False | 393096.135 | 0 | | 2316987 | 68376 | None | 2.11aPWD | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification | Tonne | 89457.0 | 89457.0 | 25.357 | False | None | None | False | None | False | 2268361.149 | 0 | | 2316988 | 68376 | None | 1.10PWD | Refilling available earth around trenches/pipelines,
cables in layers not exceeding 20 cm in depth,
compacting each deposited layer by ramming after
watering with a lead upto 50 m , and lift upto 1.5
m. Including cost of all labour complete as per
specifications | Cum | 160.0 | 160.0 | 43.05 | False | None | None | False | None | False | 6888.0 | 0 | | 2316989 | 68376 | None | 6.32PWD | Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x200x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications | Sqm | 1310.0 | 1310.0 | 667.8 | False | None | None | False | None | False | 874818.0 | 0 | | 2316990 | 68376 | None | 8.2.2PWD | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. | Sqm | 279.0 | 279.0 | 775.55 | False | None | None | False | None | False | 216378.45 | 0 | | 2316991 | 68376 | None | 8.1.2PWD | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials,
labour, curing complete as per specifications and as per directions of
Engineer-in-charge. | Sqm | 241.0 | 241.0 | 354.16 | False | None | None | False | None | False | 85352.56 | 0 | | 2316992 | 68376 | None | 8.10PWD | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) on concrete surface / ceilings including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. | Sqm | 211.0 | 211.0 | 308.58 | False | None | None | False | None | False | 65110.38 | 0 | | 2316993 | 68376 | None | 10.18PWD | Providing and fixing of wall cladding using 20mm thick gang saw water
cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand)
proportion cut to required shape, pattern with paper joints, finished with
cement mortal using white cement and colour pigments to match the colour
of slab making through jointing with sealant, making holes 25mmx12mm
grooves in joints including cost of all materials, mortar, labour, curing etc.,
complete. | Sqm | 3359.0 | 3359.0 | 34.69 | False | None | None | False | None | False | 116523.71 | 0 | | 2316994 | 68376 | None | 9.19PWD | Providing and laying Vitrified tiles with thickness 9-10 mm in different
sizes with water absorption less than 0.08% and conforming to IS: 15622,
of approved brand & manufacturer, in all colours and shade, in skirting,
riser, treads of steps, laid with cement based high polymer modified
quick set tile adhesive (water based) conforming to IS: 15477, in average
6 mm thickness, including grouting of joints as per direction of Engineer
in charge. | Sqm | 1173.0 | 1173.0 | 263.67 | False | None | None | False | None | False | 309284.91 | 0 | | 2316995 | 68376 | None | 9.23PWD | Providing and laying flamed finish Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone
slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing,
curing and polishing etc. all complete as specified and as directed
by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent | Sqm | 2466.0 | 2466.0 | 131.76 | False | None | None | False | None | False | 324920.16 | 0 | | 2316996 | 68376 | None | 8.51PWD | Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
specifications and as per directions of Engineer in charge. | Sqm | 100.0 | 100.0 | 680.44 | False | None | None | False | None | False | 68044.0 | 0 | | 2316997 | 68376 | None | 8.29PWD | Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge. | Sqm | 283.0 | 283.0 | 107.86 | False | None | None | False | None | False | 30524.38 | 0 | | 2316998 | 68376 | None | 8.54.2PWD | Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional coats
wherever required to achieve even shade and colour. Two coats as per
specifications and as per directions of Engineer in charge. | Sqm | 110.0 | 110.0 | 456.43 | False | None | None | False | None | False | 50207.3 | 0 | | 2316999 | 68376 | None | 8.31PWD | Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up
resistant, Alkali & Water resistant of required shade: New work (Two
coats applied @ 1.43 L/10 m² over and including priming coat of exterior
primer applied @ 2.20 kg/10 m²) with paint of approved quality to give
an even shade, after thoroughly brooming the surface to remove all dirt,
dust, mortar drops and foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge | Sqm | 279.0 | 279.0 | 125.02 | False | None | None | False | None | False | 34880.58 | 0 | | 2317000 | 68376 | None | 15.1PWD | Providing and laying water proofing treatment to the Roof with PU based
single component elastomeric pure polyurethane based coating on New
terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing
membrane that is highly elastic with elongation greater than
400% and tensile strength greater than 2MPa as per ASTM D412. The
waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve
final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy
primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing
membrane. The finished cost to include surface preparation,
making coving at Junction, Bore Packing, treatment of construction joints
completely as per specification. | Sqm | 817.0 | 817.0 | 327.55 | False | None | None | False | None | False | 267608.35 | 0 | | 2317001 | 68376 | None | 2.2.3PWD | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6336.0 | 6336.0 | 19.34 | False | None | None | False | None | False | 122538.24 | 0 | | 2317002 | 68376 | None | 11.34APWD | Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel windows by welding | Kg | 168.0 | 168.0 | 2160.27 | False | None | None | False | None | False | 362925.36 | 0 | | 2317003 | 68376 | None | 8.33.3PWD | Painting Steel work with Deluxe Multi Surface Paint to give an even
shade. Two coat applied @ 0.90L/10 m² over an under coat of primer
applied @ 0.80 L/10 m² of approved brand and manufacture including
preparing the surface after thorougly cleaning oil, grease, dirt and foreign
matter, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge. | Sqm | 139.0 | 139.0 | 172.92 | False | None | None | False | None | False | 24035.88 | 0 | | 2317004 | 68376 | None | 11.3PWD | Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,
with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,
handles, including applying a priming coat of approved steel primer
including cost of materials ,labour, usage charges of machinery complete
as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 8276.0 | 8276.0 | 5.04 | False | None | None | False | None | False | 41711.04 | 0 | | 2317005 | 68376 | None | 12.93.1PWD | Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/rice husk/
wheat husk) and non toxic additives (maximum toxicity index of 12 for
100 g) fabricated with miter joints after applying PVC solvent cement and
screwed with full body threaded star headed SS screws having minimum
frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) &
1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of
elasticity 900 N/mm2 and resistance to spread of flame of Class A category
with property of being termite/borer proof, water/moisture proof and fire
retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners
of required dia and length complete as per direction of Engineer-InCharge.
(Fixtures shall be paid for separately) Size 62 x 100mm | Mtr | 702.0 | 702.0 | 12.6 | False | None | None | False | None | False | 8845.2 | 0 | | 2317006 | 68376 | None | 12.94.1PWD | Providing and fixing factory made Green certified, Anti Termite, UV resistant,
high water absorbant single extruded WPC (Wood PolymerComposite) solid
plain flush door shutter of required size comprising of virgin polymer of
K value 58-60 (Suspension Grade), calcium carbonate and natural fibers
(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and
screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum
compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant and fixing
with stainless steel butt hinges of required size with necessary full body
threaded star headed counter sunk S.S screws The cost includes cost of
materials, transportation, labour and fixing charges.(Cost of Fixtures to be
paid separately) 30 mm thickness | Sqm | 3485.0 | 3485.0 | 3.6 | False | None | None | False | None | False | 12546.0 | 0 | | 2317007 | 68376 | None | 16.15.CPWD | Providing and laying reinforced cement concrete pipe NP3
for culverts on first class bedding of granular material in
single row including fixing collar with cement mortar 1:2
but excluding excavation, protection works, backfilling,
concrete and masonry works in head walls and parapets
Clause 1101.6. 750 mm dia | Mtr | 3335.0 | 3335.0 | 10.0 | False | None | None | False | None | False | 33350.0 | 0 | | 2317008 | 68376 | None | 13.48PWD | Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes 100 mm diameter | Mtr | 291.0 | 291.0 | 92.69 | False | None | None | False | None | False | 26972.79 | 0 | | 2317009 | 68376 | None | 4.1PWD | Providing and injecting chemical emulsion for Pre-constructional
Anti-Termite Treatment, creating continuous chemical barrier under
and around the column pits, walls, trenches, basement excavation, top
surface of the plinth filling, junction of wall and floor, along the external
perimeter of building, expansion joints, over the top surface of consolidated
earth on which apron is to be laid, surrounding of pipes and conduits with
Chlorpyriphos 20% E.C. Lindane 20% E.C. @ 3.19 l/m2 including cost of
chemical, diluting in water to one percent concentration, labour, usage
charges of machinery, complete as per specifications. | Sqm | 118.0 | 118.0 | 13.2 | False | None | None | False | None | False | 1557.6 | 0 | | 2317010 | 68376 | None | 2.2.1PWD | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 502.96 | 502.96 | 4.14 | False | None | None | False | None | False | 2082.2544 | 0 | | 2317011 | 68376 | None | 2.2.1PWD | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 4400.9 | 4400.9 | 3.56 | False | None | None | False | None | False | 15667.204 | 0 | | 2317012 | 68376 | None | 2.2.1PWD | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 3143.5 | 3143.5 | 1.04 | False | None | None | False | None | False | 3269.24 | 0 | | 2317013 | 68376 | None | 2.5.2PWD | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 4790.1 | 4790.1 | 5.49 | False | None | None | False | None | False | 26297.649 | 0 | | 2317014 | 68376 | None | 11.31PWD | Providing and fixing angle iron frames for doors, windows and
ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred
and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the
existing T-iron frame or to the wall with dash fastener, including fixing of
necessary butt hinges and screws and applying a priming coat of approved
steel primer, all complete as per the direction of Engineer-In-charge
including cost of materials, labour, usage charges of machinery complete
as per specifications. | Kg | 115.0 | 115.0 | 1154.0 | False | None | None | False | None | False | 132710.0 | 0 | | 2317015 | 68376 | None | 8.53.2PWD | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound) content less than 50 g/L, of approved brand and
manufacture, including applying additional coats wherever required,
to achieve even shade and colour. Two coats as per specifications and as
per directions of Engineer in charge. | Sqm | 99.0 | 99.0 | 224.01 | False | None | None | False | None | False | 22176.99 | 0 | | 2317016 | 68376 | None | 11.28PWD | Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners, stainless
steel bolts etc., of required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of Engineer-in- charge,
(for payment purpose only weight of stainless steel members shall be
considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
including cost of materials, labour, usage charges of machinery complete
as per specifications and as per directions of the Engineer-in-Charge. | Kg | 565.0 | 565.0 | 437.08 | False | None | None | False | None | False | 246950.2 | 0 |
|