| 2339934 | 69214 | None | 19.22 V-II | Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. | Sqm | 50.4 | 50.4 | 83.61 | False | None | None | False | None | False | 4213.944 | 0 |
| 2339935 | 69214 | None | 19.55 V-II | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. | Sqm | 38.85 | 38.85 | 481.09 | False | None | None | False | None | False | 18690.3465 | 0 |
| 2339936 | 69214 | None | 19.12.2 V-II | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of area beyond 3 m² | Sqm | 275.1 | 275.1 | 11.88 | False | None | None | False | None | False | 3268.188 | 0 |
| 2339937 | 69214 | None | 19.24 V-II | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.. | Sqm | 190.05 | 190.05 | 264.35 | False | None | None | False | None | False | 50239.7175 | 0 |
| 2339938 | 69214 | None | 6.8 V-II | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8367.45 | 8367.45 | 23.27 | False | None | None | False | None | False | 194710.5615 | 0 |
| 2339939 | 69214 | None | 8.1.1 V-II | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 152.86 | False | None | None | False | None | False | 40928.265 | 0 |
| 2339940 | 69214 | None | 8.2.1 V-II | Providing 15 mm thick cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 309.75 | 309.75 | 220.72 | False | None | None | False | None | False | 68368.02 | 0 |
| 2339941 | 69214 | None | 8.3.1 V-II | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 371.7 | 371.7 | 273.08 | False | None | None | False | None | False | 101503.836 | 0 |
| 2339942 | 69214 | None | 8.51 V-II | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 105.0 | 105.0 | 152.86 | False | None | None | False | None | False | 16050.3 | 0 |
| 2339943 | 69214 | None | 8.33.1 V-II | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 165.9 | 165.9 | 199.85 | False | None | None | False | None | False | 33155.115 | 0 |
| 2339944 | 69214 | None | 8.30 V-II | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 182.7 | 182.7 | 250.67 | False | None | None | False | None | False | 45797.409 | 0 |
| 2339945 | 69214 | None | 9.24 V-II | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. | Sqm | 2994.6 | 2994.6 | 83.61 | False | None | None | False | None | False | 250378.506 | 0 |
| 2339946 | 69214 | None | 10.18 V-II | Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete.. | Sqm | 3526.95 | 3526.95 | 174.99 | False | None | None | False | None | False | 617180.9805 | 0 |
| 2339947 | 69214 | None | 12.11 V-II | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Sqm | 144977.7 | 144977.7 | 5.64 | False | None | None | False | None | False | 817674.228 | 0 |
| 2339948 | 69214 | None | 12.15 V-II | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ). | Sqm | 7816.2 | 7816.2 | 11.88 | False | None | None | False | None | False | 92856.456 | 0 |
| 2339949 | 69214 | None | 11.34A V-II | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kgs | 176.4 | 176.4 | 570.47 | False | None | None | False | None | False | 100630.908 | 0 |
| 2339950 | 69214 | None | 8.33.3 V-II | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.95 | 145.95 | 47.18 | False | None | None | False | None | False | 6885.921 | 0 |
| 2339951 | 69214 | None | 11.3 V-II | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 8689.8 | 8689.8 | 20.01 | False | None | None | False | None | False | 173882.898 | 0 |
| 2339952 | 69214 | None | 2.5.1 V-I | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 14.75 | False | None | None | False | None | False | 102682.125 | 0 |
| 2339953 | 69214 | None | 15.1 V-II | Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. | Sqm | 857.85 | 857.85 | 196.61 | False | None | None | False | None | False | 168661.8885 | 0 |
| 2339954 | 69214 | None | 10.6 V-IV | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 90mm dia., 6 kg/sqcm & class 3 | Mtr | 281.0 | 281.0 | 20.4 | False | None | None | False | None | False | 5732.4 | 0 |
| 2339955 | 69214 | None | 1.12 V-I | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work | Cum | 99.75 | 99.75 | 76.09 | False | None | None | False | None | False | 7589.9775 | 0 |
| 2339956 | 69214 | None | 3.7 V-III | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC andthen compacted byrolling so as to achieve minimum dry densityas given in Table 300-2 for embankment construction | Cum | 110.25 | 110.25 | 39.65 | False | None | None | False | None | False | 4371.4125 | 0 |
| 2339957 | 69214 | None | 3.6 V-I | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 | Cum | 517.65 | 517.65 | 39.65 | False | None | None | False | None | False | 20524.8225 | 0 |
| 2339958 | 69214 | None | 4.1A V-III | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.For Grading -II Material | Cum | 2688.0 | 2688.0 | 39.65 | False | None | None | False | None | False | 106579.2 | 0 |
| 2339959 | 69214 | None | 2.1.4 V-I | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 37.04 | False | None | None | False | None | False | 241791.564 | 0 |
| 2339960 | 69214 | None | 6.82 V-III | Providing and laying 80mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification | Sqm | 1219.05 | 1219.05 | 264.35 | False | None | None | False | None | False | 322255.8675 | 0 |
| 2339961 | 69214 | None | 7.4 V-III | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra 300 x 300 x 150 mm Kerb Stone | Mtr | 394.8 | 394.8 | 100.0 | False | None | None | False | None | False | 39480.0 | 0 |
| 2339962 | 69214 | None | 1.3.2 El | Supplying heavy gauge PVC Conduit piipe.... dia....mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19mm dia 2mm thick | Mtr | 69.0 | 69.0 | 150.0 | False | None | None | False | None | False | 10350.0 | 0 |
| 2339963 | 69214 | None | 1.3.2 El | Supplying heavy gauge PVC Conduit piipe.... dia....mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick | Mtr | 81.0 | 81.0 | 75.0 | False | None | None | False | None | False | 6075.0 | 0 |
| 2339964 | 69214 | None | 1.7.1 El | Groove cutting Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of conduit/GI pipe and plastering, finishing upto wall surface complete. Upto 50mm conduit | Mtr | 29.0 | 29.0 | 80.0 | False | None | None | False | None | False | 2320.0 | 0 |
| 2339965 | 69214 | None | 1.4 El | Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135*75*65 | Each | 139.0 | 139.0 | 8.0 | False | None | None | False | None | False | 1112.0 | 0 |
| 2339966 | 69214 | None | 1.4 El | Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200*200*65 | Each | 348.0 | 348.0 | 8.0 | False | None | None | False | None | False | 2784.0 | 0 |
| 2339967 | 69214 | None | 1.5 El | Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box | Each | 49.0 | 49.0 | 10.0 | False | None | None | False | None | False | 490.0 | 0 |
| 2339968 | 69214 | None | 1.5 El | Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box | Each | 56.0 | 56.0 | 10.0 | False | None | None | False | None | False | 560.0 | 0 |
| 2339969 | 69214 | None | 1.10 El | Supplying and fixing "S' Hook made out of 14mm dia MS Rod 19/20mm deep junction box | Nos | 36.0 | 36.0 | 40.0 | False | None | None | False | None | False | 1440.0 | 0 |
| 2339970 | 69214 | None | 2.1.1 El | Point wiring using Copper wire with switch : Supplying and wiring adopting loop system in existing PVC conduit /casing capping using 2x1.5sqmm (Phase and neutral) and 1x1.00sqmm (Earth wire0 FRLS multistrand PVC insulated copper wire (confirming to IS-694 : and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet | Point | 285.0 | 285.0 | 90.0 | False | None | None | False | None | False | 25650.0 | 0 |
| 2339971 | 69214 | None | 3.5.1 El | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1-2 Module | Each | 137.0 | 137.0 | 8.0 | False | None | None | False | None | False | 1096.0 | 0 |
| 2339972 | 69214 | None | 3.5.1 El | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module | Each | 234.0 | 234.0 | 5.0 | False | None | None | False | None | False | 1170.0 | 0 |
| 2339973 | 69214 | None | 3.4 El | Supplying and flush mounting powder coated/galvnized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall 1-2 Way | Each | 138.0 | 138.0 | 8.0 | False | None | None | False | None | False | 1104.0 | 0 |
| 2339974 | 69214 | None | 3.4 El | Supplying and flush mounting powder coated/galvnized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall 6 Way | Each | 220.0 | 220.0 | 5.0 | False | None | None | False | None | False | 1100.0 | 0 |
| 2339975 | 69214 | None | 3.6.1 El | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way | Each | 102.0 | 102.0 | 8.0 | False | None | None | False | None | False | 816.0 | 0 |
| 2339976 | 69214 | None | 3.6.1 El | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps Two way | Each | 166.0 | 166.0 | 5.0 | False | None | None | False | None | False | 830.0 | 0 |
| 2339977 | 69214 | None | 3.6.1 El | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan | Each | 357.0 | 357.0 | 5.0 | False | None | None | False | None | False | 1785.0 | 0 |
| 2339978 | 69214 | None | 3.6.1 El | Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone | Each | 156.0 | 156.0 | 2.0 | False | None | None | False | None | False | 312.0 | 0 |
| 2339979 | 69214 | None | 3.7 El | Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 volts. 50Hz AC supply and completely wired on existing box | Each | 646.0 | 646.0 | 1.0 | False | None | None | False | None | False | 646.0 | 0 |
| 2339980 | 69214 | None | 3.8 El | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches. regulators etc., and fixing on existing wooden or metal box using NF screws. | Each | 0.41 | 0.41 | 8.0 | False | None | None | False | None | False | 3.28 | 0 |
| 2339981 | 69214 | None | 3.12 El | Supplying way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws 1 way gang box | Each | 23.0 | 23.0 | 5.0 | False | None | None | False | None | False | 115.0 | 0 |
| 2339982 | 69214 | None | 3.12 El | Supplying way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws 2 to 4 way gang box | Each | 32.0 | 32.0 | 5.0 | False | None | None | False | None | False | 160.0 | 0 |
| 2339983 | 69214 | None | 3.14 El | Supplying and fixing /replacing of 6/16/32Amps electrical accessories on existing switch board | Each | 70.0 | 70.0 | 5.0 | False | None | None | False | None | False | 350.0 | 0 |
| 2339984 | 69214 | None | 5.4.1 El | Fixing a Shunt capacitor of ….KVAR capacity with necessary clamps, bolts and nuts on existing wooden or metal board including banking of more than one capacitor | Each | 154.0 | 154.0 | 8.0 | False | None | None | False | None | False | 1232.0 | 0 |
| 2339985 | 69214 | None | 2.3.1 El | Wiring for lighting /power circuit using one of PVC insulated 1100V Grade ,muftis and copper conductor single core cable in open or concealed system of wiring. Using class ‘A’ approved materialals. 1Sqmm | MT | 19.0 | 19.0 | 20.0 | False | None | None | False | None | False | 380.0 | 0 |
| 2339986 | 69214 | None | 2.3.1 El | Wiring for lighting /power circuit using one of PVC insulated 1100V Grade ,muftis and copper conductor single core cable in open or concealed system of wiring. Using class ‘A’ approved materialals.2.5Sqmm | MT | 42.0 | 42.0 | 40.0 | False | None | None | False | None | False | 1680.0 | 0 |
| 2339987 | 69214 | None | 5.6.6 El | Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws 20"x20"x2.5" | Each | 326.13 | 326.13 | 5.0 | False | None | None | False | None | False | 1630.65 | 0 |
| 2339988 | 69214 | None | 5.7.1 El | Supplying and fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts.bolts and washers 16 Amps | Each | 157.0 | 157.0 | 3.0 | False | None | None | False | None | False | 471.0 | 0 |
| 2339989 | 69214 | None | 5.18.1 El | Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure 4 way SP and N | Each | 1241.0 | 1241.0 | 2.0 | False | None | None | False | None | False | 2482.0 | 0 |
| 2339990 | 69214 | None | 6.3.1 El | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. single phase AC supply conforming to ISS-374-1979 and with double ball bearing system48" Sweep (1200 mm) Regular model (1200mm) Regular Model | Each | 2984.0 | 2984.0 | 5.0 | False | None | None | False | None | False | 14920.0 | 0 |
| 2339991 | 69214 | None | 32.05 El | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm | Mtr | 141842.0 | 141842.0 | 0.025 | False | None | None | False | None | False | 3546.05 | 0 |
| 2339992 | 69214 | None | 11.3.1 El | Supplying of LED light fighting 1x2'-9/10w.feet-PVC batten with integrated LED tube ..... W with high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power input 220-240v @ 50/60Hz and power factor 0.9 along with CE approved 2 years warranty against any maufacturing defect working under standard electrical condition.LED light fighting 1x2'-9/10w | Each | 551.0 | 551.0 | 12.0 | False | None | None | False | None | False | 6612.0 | 0 |