| 2335899 | 69022 | None | ITEM01 | Road Side Nursery-B. 1. Borewell Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE. 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test (P. 153, I. 4) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Each BW | 5141.0 | 5141.0 | 1.0 | False | None | None | False | None | False | 5141.0 | 0 |
| 2335900 | 69022 | None | ITEM02 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ( P. 151 / I. 1 PRED SR 2019-20 WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V 0 to 50 m | Rmtr | 290.0 | 290.0 | 50.0 | False | None | None | False | None | False | 14500.0 | 0 |
| 2335901 | 69022 | None | ITEM03 | 50 to 100 m | Each | 364.0 | 364.0 | 50.0 | False | None | None | False | None | False | 18200.0 | 0 |
| 2335902 | 69022 | None | ITEM04 | 100 to 150 m | Each | 387.0 | 387.0 | 50.0 | False | None | None | False | None | False | 19350.0 | 0 |
| 2335903 | 69022 | None | ITEM05 | 150 to 200 m | Each | 449.0 | 449.0 | 50.0 | False | None | None | False | None | False | 22450.0 | 0 |
| 2335904 | 69022 | None | ITEM06 | 200 to 250 m | Each | 527.0 | 527.0 | 50.0 | False | None | None | False | None | False | 26350.0 | 0 |
| 2335905 | 69022 | None | ITEM07 | 250 to 300 m | Each | 558.0 | 558.0 | 50.0 | False | None | None | False | None | False | 27900.0 | 0 |
| 2335906 | 69022 | None | ITEM08 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty (P. 154, I. 32) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Rmtr | 1933.0 | 1933.0 | 60.0 | False | None | None | False | None | False | 115980.0 | 0 |
| 2335907 | 69022 | None | ITEM09 | Providing 250mm dia PVC Pipe 6kg/cm (P. 34, I. 1175) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Rmtr | 1100.0 | 1100.0 | 18.0 | False | None | None | False | None | False | 19800.0 | 0 |
| 2335908 | 69022 | None | ITEM10 | Providing and fixing Borewell Cap & Clamp Set P. XLVII, SI No. 17 PWD SR 2018-19 | Set | 1800.0 | 1800.0 | 1.0 | False | None | None | False | None | False | 1800.0 | 0 |
| 2335909 | 69022 | None | ITEM11 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work 12.50 HP - 90 LPM @ 264 m = 24 STG Outlet Dia - 2.00 (P. 161, I No. 17.7) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | No | 63498.0 | 63498.0 | 1.0 | False | None | None | False | None | False | 63498.0 | 0 |
| 2335910 | 69022 | None | ITEM12 | Providing, Laying and Fixing GI pipes conforming to IS 1239.1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) Medium Duty GI pipe of 50mm dia (P 142, I No. 2.6), WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Mtr | 479.0 | 479.0 | 280.0 | False | None | None | False | None | False | 134120.0 | 0 |
| 2335911 | 69022 | None | ITEM13 | Providing wrought mild steel (galvanized) 50 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. (P. 144, I No. 6.5) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Nos | 219.0 | 219.0 | 47.0 | False | None | None | False | None | False | 10293.0 | 0 |
| 2335912 | 69022 | None | ITEM14 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50 mm (P. 162, I No. 28.1) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Nos | 1275.0 | 1275.0 | 1.0 | False | None | None | False | None | False | 1275.0 | 0 |
| 2335913 | 69022 | None | ITEM15 | Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments 10 to 120 HP centrifugal pump (P. 165, I No. 49.3) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | No | 35480.0 | 35480.0 | 1.0 | False | None | None | False | None | False | 35480.0 | 0 |
| 2335914 | 69022 | None | ITEM16 | Submersible Cable 1x3x6.0 Sq.mm (PWD SR 2018-19 Page No. XLVII SI No. 8) | Mtr | 144.0 | 144.0 | 580.0 | False | None | None | False | None | False | 83520.0 | 0 |
| 2335915 | 69022 | None | ITEM17 | Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and released pump set should be handed over to department) including transportation (Each length = 6 m (P. 154, I No. 28) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Job | 151.0 | 151.0 | 47.0 | False | None | None | False | None | False | 7097.0 | 0 |
| 2335916 | 69022 | None | ITEM18 | Supplying and fixing 20"x20"x2.5" polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws., P No. 24 / I No. 5.6.6 KPWD Electrical SR 2019-20 | Each | 292.0 | 292.0 | 1.0 | False | None | None | False | None | False | 292.0 | 0 |
| 2335917 | 69022 | None | ITEM19 | Providing, Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen / insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work.3 1/2 x6 Sqm (P. 164, I No. 44.1) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021 22 Volume V | Mtr | 515.0 | 515.0 | 35.0 | False | None | None | False | None | False | 18025.0 | 0 |
| 2335918 | 69022 | None | ITEM20 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) P No. 41 / I. No. 6.6.1 KPWD Electrical SR 2019-20 | Mtr | 76.0 | 76.0 | 30.0 | False | None | None | False | None | False | 2280.0 | 0 |
| 2335919 | 69022 | None | ITEM21 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. P. No. 41 / I No. 6.9.1 KPWD Electrical SR 2019-20 | Mtr | 335.0 | 335.0 | 4.0 | False | None | None | False | None | False | 1340.0 | 0 |
| 2335920 | 69022 | None | ITEM22 | Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. P. No. 42 / I.No. 7.10.2 KPWD Electrical SR 2019-20 | No. | 270.0 | 270.0 | 1.0 | False | None | None | False | None | False | 270.0 | 0 |
| 2335921 | 69022 | None | ITEM23 | Earthing. Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia (P. 164, I No. 45) WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Job | 3750.0 | 3750.0 | 1.0 | False | None | None | False | None | False | 3750.0 | 0 |
| 2335922 | 69022 | None | ITEM24 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.P No. 24 / I No. 5.7.2 KPWD Electrical SR 2019-20 | No. | 174.0 | 174.0 | 6.0 | False | None | None | False | None | False | 1044.0 | 0 |
| 2335923 | 69022 | None | ITEM25 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps TPN P No. 27 / I No.5.17.7 KPWD SR 2019-20 | No | 1715.0 | 1715.0 | 1.0 | False | None | None | False | None | False | 1715.0 | 0 |
| 2335924 | 69022 | None | ITEM26 | Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete P.No. 30, I. No. 5.42.2 KPWD Electrical SR 2019-20 | Sq CM | 0.35 | 0.35 | 23400.0 | False | None | None | False | None | False | 8190.0 | 0 |
| 2335925 | 69022 | None | ITEM27 | Road Side Nursery-B. 2. Pipeline | Cum | 213.4 | 213.4 | 46.58 | False | None | None | False | None | False | 9940.172 | 0 |
| 2335926 | 69022 | None | ITEM28 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete., 75mm(weight of pipe -0.917 kg P .139, I No. 13.1 WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Rmtr | 210.0 | 210.0 | 230.0 | False | None | None | False | None | False | 48300.0 | 0 |
| 2335927 | 69022 | None | ITEM29 | Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete Item No. 1.11 Page No. 7, PWD SR 2021-2 Vol-I | Cum | 2394.7 | 2394.7 | 25.88 | False | None | None | False | None | False | 61974.836 | 0 |
| 2335928 | 69022 | None | ITEM30 | Refilling available earth around trenches / pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Item No. 1.10 Page No. 7, PWD SR 2021-22 Vol-I | Cum | 103.0 | 103.0 | 20.7 | False | None | None | False | None | False | 2132.1 | 0 |
| 2335929 | 69022 | None | ITEM31 | Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendment Size 65 mm P .162, I No. 27.2, WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES 2021-22 Volume - V | Each | 1550.0 | 1550.0 | 5.0 | False | None | None | False | None | False | 7750.0 | 0 |
| 2335930 | 69022 | None | ITEM32 | Road Side Nursery-B 3. RFO Office Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (PWD SR 2021-22 Vol -I Pg 8 item No. 1.14.1) | Cum | 80.3 | 80.3 | 70.43 | False | None | None | False | None | False | 5655.529 | 0 |
| 2335931 | 69022 | None | ITEM33 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1.3.6 (M10) Using 20 mm nominal size graded crushed coarse aggregates.Specification (PWD SR 2021-22 Vol -I Pg 15 item no 2.1.4) | Cum | 6300.8 | 6300.8 | 19.44 | False | None | None | False | None | False | 122487.552 | 0 |
| 2335932 | 69022 | None | ITEM34 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1.6 (1 cement . 6 coarse sand) Item No. 5.4, Page No. 9, Vol - II PWD SR 2021-22 | Cum | 5964.2 | 5964.2 | 26.64 | False | None | None | False | None | False | 158886.288 | 0 |
| 2335933 | 69022 | None | ITEM35 | Providing ruled pointing to cursed stone masonry with lime mortar 1.3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery, curing complete as pre specification. Item No. 21.10 Page No. 190, Vol - II PWD SR 2021-22 | Sqm | 261.8 | 261.8 | 14.94 | False | None | None | False | None | False | 3911.292 | 0 |
| 2335934 | 69022 | None | ITEM36 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ((PWD SR 2021-22 Vol- 1 P.No -7 / I.No -1.9) | Cum | 224.4 | 224.4 | 70.43 | False | None | None | False | None | False | 15804.492 | 0 |
| 2335935 | 69022 | None | ITEM37 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol 2/ P No-17/ I no- 2.4.3 of PWD SR 2021-22) | Cum | 8239.0 | 8239.0 | 38.48 | False | None | None | False | None | False | 317036.72 | 0 |
| 2335936 | 69022 | None | ITEM38 | Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (Vol- 1 P.No. 84/I.No. 11.32 of PWD SR 2021-22 1st Corrigenda) | Kgs | 105.6 | 105.6 | 4617.72 | False | None | None | False | None | False | 487631.232 | 0 |
| 2335937 | 69022 | None | ITEM39 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1.4 as per IS 2572.2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (Vol 2/ P No-17/ I no- 6.33 of PWD SR 2021-22) | Sqm | 1167.1 | 1167.1 | 151.32 | False | None | None | False | None | False | 176605.572 | 0 |
| 2335938 | 69022 | None | ITEM40 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC.Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (PWD SR 2021-22 Vol -II Pg 133 item no 15.1) | Sqm | 819.5 | 819.5 | 69.92 | False | None | None | False | None | False | 57299.44 | 0 |
| 2335939 | 69022 | None | ITEM41 | Providing 12mm thick cement plaster in floating coat of neat cement of mix .1.4 to Brick masonry including rounding off corners wherever reduired smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per diredtion of Engineer-in-charge (PWD SR 2021-22 Vol -II Pg 41 item no 8.4.2) | Sqm | 288.2 | 288.2 | 69.37 | False | None | None | False | None | False | 19992.434 | 0 |
| 2335940 | 69022 | None | ITEM42 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1.5 (1 cement . 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1.3 (1 cement. 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2021-22 Vol -II Pg 42 item no 8.9) | Sqm | 354.2 | 354.2 | 210.92 | False | None | None | False | None | False | 74707.864 | 0 |
| 2335941 | 69022 | None | ITEM43 | Providing 20 mm cement plaster of mix .1.4 (1 cement. 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Vol 2/ P No-41/ I no- 8.3.1 of PWD SR 2021-22) | Sqm | 328.9 | 328.9 | 163.4 | False | None | None | False | None | False | 53742.26 | 0 |
| 2335942 | 69022 | None | ITEM44 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(PWD SR 2021-22 Vol -II Pg 50 item no 8.51) | Sqm | 91.3 | 91.3 | 280.28 | False | None | None | False | None | False | 25589.564 | 0 |
| 2335943 | 69022 | None | ITEM45 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade .Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2021-22 Vol -II Pg 48 item no 8.41) | Sqm | 143.0 | 143.0 | 280.28 | False | None | None | False | None | False | 40080.04 | 0 |
| 2335944 | 69022 | None | ITEM46 | Finishing walls with Acrylic Smooth exterior paint of required shade .New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 Vol -II Pg 46 item no 8.30) | Sqm | 149.6 | 149.6 | 163.4 | False | None | None | False | None | False | 24444.64 | 0 |
| 2335945 | 69022 | None | ITEM47 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1.2.4 (1cement . 2 coarse sand . 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1.2 (1 cement hardener mix . 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. (PWD SR 2021-22 Vol -II Pg 59 item no 9.2) | Sqm | 796.4 | 796.4 | 62.32 | False | None | None | False | None | False | 49631.648 | 0 |
| 2335946 | 69022 | None | ITEM48 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1.4 (1 cement . 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. (PWD SR 2021-22 Vol -II Pg 63 item no 9.24) | Sqm | 3157.0 | 3157.0 | 62.87 | False | None | None | False | None | False | 198480.59 | 0 |
| 2335947 | 69022 | None | ITEM49 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms. Toilet. Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS . 4457, In flooring on a bed of 10 mm thick mortar 1.4 (1 acid proof cement . 4 coarse sand) with Acid and alkali resistant tile complete as per the direction of Engineer-in- Charge. (PWD SR 2021-22 Vol -II Pg 59 item no 9.7.1) | Sqm | 1158.3 | 1158.3 | 5.25 | False | None | None | False | None | False | 6081.075 | 0 |
| 2335948 | 69022 | None | ITEM50 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1.3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR 2021-22 Vol -II Pg 65 item no 9.39) | Sqm | 1140.7 | 1140.7 | 23.61 | False | None | None | False | None | False | 26931.927 | 0 |
| 2335949 | 69022 | None | ITEM51 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD SR 2021-22 Vol -II Pg 99 item no 12.11) | Sqm | 99432.3 | 99432.3 | 0.47 | False | None | None | False | None | False | 46733.181 | 0 |
| 2335950 | 69022 | None | ITEM52 | Providing and fixing in position honnewood fully panelled shutters for windows with stiles and rails of 35mm thick, 75mm wide in two halves with panels of 25 mm thick including cost of materials, labour charges, usage charges complete as per specifications. (Excluding cost of fixtures) (PWD SR 2021-22, Vol -2, Page 101 item no 12.23) | Sqm | 5700.2 | 5700.2 | 8.19 | False | None | None | False | None | False | 46684.638 | 0 |
| 2335951 | 69022 | None | ITEM53 | Providing and fixing fiber glass reinforced plastic (FRP) Door frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyrster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frames shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame (PWD SR 2021-22 Vol -2 CORRIGENDA, item No.12.98) | Mtr | 694.1 | 694.1 | 11.4 | False | None | None | False | None | False | 7912.74 | 0 |
| 2335952 | 69022 | None | ITEM54 | Providing and fixing to existing door frames. 30mm thick glass fiber reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made ith fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS.14856, including fixing to frames(PWD SR 2021-22 Vol -2 CORRIGENDA, item No.12.99.1) | Sqm | 3437.5 | 3437.5 | 3.15 | False | None | None | False | None | False | 10828.125 | 0 |
| 2335953 | 69022 | None | ITEM55 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (PWD SR 2021-22 Vol -II Pg 85 item no 11.34B) | Kg | 157.3 | 157.3 | 275.94 | False | None | None | False | None | False | 43405.362 | 0 |
| 2335954 | 69022 | None | ITEM56 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). (PWD SR 2021-22 Vol -II Pg 112 item no 12.9) | Sqm | 7964.0 | 7964.0 | 12.6 | False | None | None | False | None | False | 100346.4 | 0 |
| 2335955 | 69022 | None | ITEM57 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). (PWD SR 2021-22 Vol -II Pg 110 item no 12.85) | Sqm | 5357.0 | 5357.0 | 0.54 | False | None | None | False | None | False | 2892.78 | 0 |
| 2335956 | 69022 | None | ITEM58 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr / 10 m 2 over an under coat of primer applied at 0.80 ltr / 10 m 2 of approved brand and manufacture including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. (PWD SR 2021-22 Vol -II Page 47 item no 8.33.3) | Sqm | 116.6 | 116.6 | 6.48 | False | None | None | False | None | False | 755.568 | 0 |
| 2335957 | 69022 | None | ITEM59 | Sanitary Work for Building Providing and placing on terrace(at all floor levels), polyethylene water storage tanks as per IS 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank(For 1000 litre capacity) (PWD SR 2021-22 1st Corrigenda Vol II.SI No.12.Item No 13.34). | Ltr | 8.8 | 8.8 | 1000.0 | False | None | None | False | None | False | 8800.0 | 0 |
| 2335958 | 69022 | None | ITEM60 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required . W.C. pan with ISI marked white solid plastic seat and lid(PWD SR 2021-22 Vol II. PgNo.123.Item No14.3.1 ) | Each | 5505.5 | 5505.5 | 2.0 | False | None | None | False | None | False | 11011.0 | 0 |
| 2335959 | 69022 | None | ITEM61 | PTMT grating 100 mm dia.(PWD SR 2021-22 Vol II. PgNo.A-26 Item No 470) | Each | 17.6 | 17.6 | 2.0 | False | None | None | False | None | False | 35.2 | 0 |
| 2335960 | 69022 | None | ITEM62 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(PWD SR 2021-22 Vol II. PgNo 124.Item No 14.7.1) | Each | 2781.9 | 2781.9 | 2.0 | False | None | None | False | None | False | 5563.8 | 0 |
| 2335961 | 69022 | None | ITEM63 | Providing and fixing brass bib cock of approved quality . 20 mm nominal bore (PWD SR 2021-22 Vol II. PgNo 115.Item No 13.2.2 ) | Nos | 379.5 | 379.5 | 4.0 | False | None | None | False | None | False | 1518.0 | 0 |
| 2335962 | 69022 | None | ITEM64 | Providing and fixing brass stop cock of approved quality . 20 mm nominal bore | Nos | 379.5 | 379.5 | 4.0 | False | None | None | False | None | False | 1518.0 | 0 |
| 2335963 | 69022 | None | ITEM65 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete . 20 mm nominal bore (PWD SR 2021-22 Vol II. PgNo 115.Item No 13.5.2) | Nos | 396.0 | 396.0 | 4.0 | False | None | None | False | None | False | 1584.0 | 0 |
| 2335964 | 69022 | None | ITEM66 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (PWD SR 2021-22 Vol II. Page No 128 Item No 14.31) | Nos | 1068.1 | 1068.1 | 2.0 | False | None | None | False | None | False | 2136.2 | 0 |
| 2335965 | 69022 | None | ITEM67 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.,) 20mm nominal dia pipes (PWD SR 2021-22 1st Corrigenda Vol II. SL No. 10 .Item No 13.33.3) | Mtr | 410.3 | 410.3 | 50.0 | False | None | None | False | None | False | 20515.0 | 0 |
| 2335966 | 69022 | None | ITEM68 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS. 13592 Type A, including jointing with seal ring conforming to IS.5382, leaving 10 mm gap for thermal expansion, i single socketed pipes 100 mm diameter. (PWD SR 2021-22 1st Corrigenda Vol II, SL No. 27, Item No 13.48) | Mtr | 278.3 | 278.3 | 40.0 | False | None | None | False | None | False | 11132.0 | 0 |
| 2335967 | 69022 | None | ITEM69 | PVC pipe - OD 160mm and 6 Kg/sqcm(PWD SR 2021-22 Vol V. Pg No.34 .Item No 1171) | Mtr | 280.5 | 280.5 | 50.0 | False | None | None | False | None | False | 14025.0 | 0 |
| 2335968 | 69022 | None | ITEM70 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1.6, bed concrete 150 mm thick with 1.3.6, plastering 12 mm thick with cement mortar 1.4, CC 1.2.4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(PWD SR 2021-22 Vol V. Pg No.187. Item No 10) | No | 4250.4 | 4250.4 | 2.0 | False | None | None | False | None | False | 8500.8 | 0 |
| 2335969 | 69022 | None | ITEM71 | Elecrical Items Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal / PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick (including audio system) complete and as per the directions of the Engineer-in-charge of the work. (PWD SR 2021-2022 Electrical Work-Part I, Pg 1, Item No.1.1.1) | Mtr | 61.0 | 61.0 | 50.0 | False | None | None | False | None | False | 3050.0 | 0 |
| 2335970 | 69022 | None | ITEM72 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick(including audio system)complete and as per the directions of the Engineer-in-charge of the work 25mm dia 2mm thick(PWD SR 2021-2022-Electrical Work-Part I,Pg 1,Item No.1.1.2) | Mtr | 70.0 | 70.0 | 50.0 | False | None | None | False | None | False | 3500.0 | 0 |
| 2335971 | 69022 | None | ITEM73 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal / PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 32mm dia 2mm thick thick(including audio system)complete and as per the directions of the Engineer-in-charge of the work (PWD SR 2021-2022 Electrical Work-Part I, Pg 1, Item No.1.2.3) | Mtr | 93.0 | 93.0 | 10.0 | False | None | None | False | None | False | 930.0 | 0 |
| 2335972 | 69022 | None | ITEM74 | Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required. 25mm.(PWD SR 2021-2022-Electrical Work-Part I,Pg 2,Item No.1.8.2) | Mtr | 28.0 | 28.0 | 5.0 | False | None | None | False | None | False | 140.0 | 0 |
| 2335973 | 69022 | None | ITEM75 | Supplying And Fixing Metal Fan Box with Round Hook.(PWD SR 2021-2022-Electrical Work-Part I,Pg 2,Item No.1.12) | Each | 163.0 | 163.0 | 7.0 | False | None | None | False | None | False | 1141.0 | 0 |
| 2335974 | 69022 | None | ITEM76 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. GROUP A. Short point upto 3Mtr from tapping point to out let via switch box(PWD SR 2021-2022-Electrical Work-Part I,Pg 3,Item No.2.2.1) | Each | 251.0 | 251.0 | 1.0 | False | None | None | False | None | False | 251.0 | 0 |
| 2335975 | 69022 | None | ITEM77 | Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box.(PWD SR 2021-2022-Electrical Work-Part I,Pg 3,Item No.2.2.2) | Each | 361.0 | 361.0 | 4.0 | False | None | None | False | None | False | 1444.0 | 0 |
| 2335976 | 69022 | None | ITEM78 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694.1990 & confirming to GTP of GROUP-A. 1.5 sqmm. (PWD SR 2021-2022 Electrical Work-Part I, Pg 3, Item No.2.3.2) | Mtr | 26.0 | 26.0 | 50.0 | False | None | None | False | None | False | 1300.0 | 0 |
| 2335977 | 69022 | None | ITEM79 | Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694.1990 & confirming to GTP of GROUP-A.2.5 sqm. (PWD SR 2021-2022 Electrical Work-Part I, Pg 3, Item No.2.3.3) | Mtr | 40.0 | 40.0 | 50.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 2335978 | 69022 | None | ITEM80 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694.1990 & confirming to GTP of GROUP -A 4 sqmm..(PWD SR 2021-2022-Electrical Work-Part I,Pg 3,Item No.2.3.4) | Mtr | 59.0 | 59.0 | 10.0 | False | None | None | False | None | False | 590.0 | 0 |
| 2335979 | 69022 | None | ITEM81 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way.(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No.3.4.1) | Each | 123.0 | 123.0 | 10.0 | False | None | None | False | None | False | 1230.0 | 0 |
| 2335980 | 69022 | None | ITEM82 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way.(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No.3.4.4) | Each | 250.0 | 250.0 | 5.0 | False | None | None | False | None | False | 1250.0 | 0 |
| 2335981 | 69022 | None | ITEM83 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module..(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No.3.5.1) | Each | 152.0 | 152.0 | 3.0 | False | None | None | False | None | False | 456.0 | 0 |
| 2335982 | 69022 | None | ITEM84 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module.(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No.3.5.4) | Each | 302.0 | 302.0 | 2.0 | False | None | None | False | None | False | 604.0 | 0 |
| 2335983 | 69022 | None | ITEM85 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A 6Amps one way..(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No 3.6.1) | Each | 88.0 | 88.0 | 5.0 | False | None | None | False | None | False | 440.0 | 0 |
| 2335984 | 69022 | None | ITEM86 | Stepped Fan Regulator..(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No.3.6.4) | Each | 313.0 | 313.0 | 3.0 | False | None | None | False | None | False | 939.0 | 0 |
| 2335985 | 69022 | None | ITEM87 | 16Amps one way switch.(PWD SR 2021-2022-Electrical Work-Part I,Pg 5,Item No.3.6.8) | Each | 249.0 | 249.0 | 1.0 | False | None | None | False | None | False | 249.0 | 0 |
| 2335986 | 69022 | None | ITEM88 | LED Indoor Supplying of 2 feet - LED PVC Square Batten ..W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input. 220-240V 50Hz & Power factor 0.9 along with CE approved drivers. 5 years Warranty against any manufacturing defect working under standard electrical condition LED light fighting 4 - 28 watts complete and as per the directions of the Engineer-in-charge of the work.(PWD SR 2021-2022-Electrical Work-Part I,Pg 34,Item No.11.3.1) | Each | 496.0 | 496.0 | 3.0 | False | None | None | False | None | False | 1488.0 | 0 |
| 2335987 | 69022 | None | ITEM89 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5-32Amps SP.(PWD SR 2021-2022-Electrical Work-Part I,Pg 13,Item No.5.17.1) | Each | 523.0 | 523.0 | 1.0 | False | None | None | False | None | False | 523.0 | 0 |
| 2335988 | 69022 | None | ITEM90 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 5-32Amps SP.(PWD SR 2021-2022-Electrical Work-Part I,Pg 13,Item No.5.17.1) | Each | 523.0 | 523.0 | 1.0 | False | None | None | False | None | False | 523.0 | 0 |
| 2335989 | 69022 | None | ITEM91 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door 12Way SP &N.(PWD SR 2021-2022-Electrical Work-Part I,Pg 13,Item No.5.18.9) | Each | 2067.0 | 2067.0 | 1.0 | False | None | None | False | None | False | 2067.0 | 0 |
| 2335990 | 69022 | None | ITEM92 | Furnitures for RFO Office Providing Waiting chairs of Feather Lite or any other Equivalent Brand as per Specifications and Directions of The Engineer Incharge (Data Rate To Be Approved ) | Each | 5000.0 | 5000.0 | 5.0 | False | None | None | False | None | False | 25000.0 | 0 |
| 2335991 | 69022 | None | ITEM93 | Providing Office Table of Feather Lite,Royal Oak or any other Equivalent Brand as per Specifications and Directions of The Engineer Incharge (Data Rate To Be Approved ) | Each | 30000.0 | 30000.0 | 1.0 | False | None | None | False | None | False | 30000.0 | 0 |
| 2335992 | 69022 | None | ITEM94 | Providing Chairs of Feather Lite,Royal Oak or any other Equivalent Brand as per Specifications and Directions of The Engineer Incharge (Data Rate To Be Approved ) | Each | 8000.0 | 8000.0 | 5.0 | False | None | None | False | None | False | 40000.0 | 0 |
| 2335993 | 69022 | None | ITEM95 | Providing Officier Chairs for RFO Chamber office of Feather Lite,Royal Oak or any other Equivalent Brand as per Specifications and Directions of The Engineer Incharge (Data Rate To Be Approved ) | Each | 25000.0 | 25000.0 | 1.0 | False | None | None | False | None | False | 25000.0 | 0 |
| 2335994 | 69022 | None | ITEM96 | Providing Goorej Wardrobe for Store Room or any other Equivalent Brand as per Specifications and Directions of The Engineer Incharge (Data Rate To Be Approved ) | Each | 30000.0 | 30000.0 | 1.0 | False | None | None | False | None | False | 30000.0 | 0 |
| 2335995 | 69022 | None | ITEM97 | Road Side Nursery - B. 4. Road Work | Cum | 71.5 | 71.5 | 76.12 | False | None | None | False | None | False | 5442.58 | 0 |
| 2335996 | 69022 | None | ITEM98 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density MORTH Specification No. 406 (PWD SR 21-22 Vol III Pg no. 24 Item No. 4.27 (A)) | Cum | 2633.4 | 2633.4 | 76.12 | False | None | None | False | None | False | 200454.408 | 0 |