| 2342742 | 69309 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m (P.No. 8, I.No. 1.14.1 VOL 1 of PWP & IWTD SR 2023-24) | Cum | 112.2 | 112.2 | 27.198 | False | None | None | False | None | False | 3051.6156 | 0 |
| 2342743 | 69309 | None | code02 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (P.No. 07, I.No. 1.9 VOL 1 of PWP & IWTD SR 2023-24) | Cum | 292.6 | 292.6 | 20.3985 | False | None | None | False | None | False | 5968.6011 | 0 |
| 2342744 | 69309 | None | code03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(P.No. 15, I.No. 2.1.3 VOL 1 of PWP & IWTD SR 2023-24) | Cum | 6587.9 | 6587.9 | 3.4 | False | None | None | False | None | False | 22398.86 | 0 |
| 2342745 | 69309 | None | code04 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (P.No. 9, I.No. 5.4 VOL 2 of PWP & IWTD SR 2023-24) | Cum | 7027.9 | 7027.9 | 10.683 | False | None | None | False | None | False | 75079.0557 | 0 |
| 2342746 | 69309 | None | code05 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (P.No. 17, I.No. 6.32 , VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 1441.0 | 1441.0 | 100.03 | False | None | None | False | None | False | 144143.23 | 0 |
| 2342747 | 69309 | None | code06 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No. 15, I.No. 2.2.2.1VOL 1 of PWP & IWTD SR 2023-24) | Cum | 7527.17 | 7527.17 | 1.215 | False | None | None | False | None | False | 9145.51155 | 0 |
| 2342748 | 69309 | None | code07 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(P.No. 16, I.No. 2.5.2 VOL 1 of PWP & IWTD SR 2023-24) | Cum | 9032.76 | 9032.76 | 9.03 | False | None | None | False | None | False | 81565.8228 | 0 |
| 2342749 | 69309 | None | code08 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(P.No. 16, I.No. 2.5.2 VOL 1 of PWP & IWTD SR 2023-24) for columns | Cum | 8280.03 | 8280.03 | 2.376 | False | None | None | False | None | False | 19673.35128 | 0 |
| 2342750 | 69309 | None | code09 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(P.No. 18, I.No.2.11.a VOL 1 of PWP & IWTD SR 2023-24) | Tonne | 98402.7 | 98402.7 | 1.4 | False | None | None | False | None | False | 137763.78 | 0 |
| 2342751 | 69309 | None | code10 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(P.No. 41, I.No. 8.1.1 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 280.5 | 280.5 | 141.28 | False | None | None | False | None | False | 39629.04 | 0 |
| 2342752 | 69309 | None | code11 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(P.No. 41, I.No. 8.2.1 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 324.5 | 324.5 | 66.655 | False | None | None | False | None | False | 21629.5475 | 0 |
| 2342753 | 69309 | None | code12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (P.No. 50, I.No. 8.51 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 110.0 | 110.0 | 207.94 | False | None | None | False | None | False | 22873.4 | 0 |
| 2342754 | 69309 | None | code13 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P.No. 45, I.No. 8.28 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 97.9 | 97.9 | 141.28 | False | None | None | False | None | False | 13831.312 | 0 |
| 2342755 | 69309 | None | code14 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P.No. 45, I.No. 8.29 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 311.3 | 311.3 | 66.655 | False | None | None | False | None | False | 20749.7015 | 0 |
| 2342756 | 69309 | None | code15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (P.No. 60, I.No. 9.9 of VOL 2 PWP & IWTD SR 2023-24) | Sqm | 1183.6 | 1183.6 | 29.25 | False | None | None | False | None | False | 34620.3 | 0 |
| 2342757 | 69309 | None | code16 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 500x500 mm (P.No. 61, I.No. 9.17.1 VOL 2of PWP & IWTD SR 2023-24) | Sqm | 1223.2 | 1223.2 | 66.75 | False | None | None | False | None | False | 81648.6 | 0 |
| 2342758 | 69309 | None | code17 | Providing and placing on terrace (at all floor levels) polyethylene water storage tanks, IS 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for the tank. (P.No. 123, I.No. 13.34 VOL 2 of PWP & IWTD SR 2023-24) | l | 9.27 | 9.27 | 1000.0 | False | None | None | False | None | False | 9270.0 | 0 |
| 2342759 | 69309 | None | code18 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (P.No. 132, I.No. 14.7.3 VOL 2 of PWP & IWTD SR 2023-24) | Each | 3152.6 | 3152.6 | 4.0 | False | None | None | False | None | False | 12610.4 | 0 |
| 2342760 | 69309 | None | code19 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid(P.No. 131, I.No. 14.3.1 VOL 2 of PWP & IWTD SR 2023-24) | Each | 6574.7 | 6574.7 | 5.0 | False | None | None | False | None | False | 32873.5 | 0 |
| 2342761 | 69309 | None | code20 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (P.No. 109, I.No. 12.85 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 6290.9 | 6290.9 | 0.9 | False | None | None | False | None | False | 5661.81 | 0 |
| 2342762 | 69309 | None | code21 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(P.No. 99, I.No. 12.11 VOL 2 of PWP & IWTD SR 2023-24) | Cum | 151881.4 | 151881.4 | 0.36 | False | None | None | False | None | False | 54677.304 | 0 |
| 2342763 | 69309 | None | code22 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )(P.No. 100, I.No. 12.15 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 8188.4 | 8188.4 | 1.8 | False | None | None | False | None | False | 14739.12 | 0 |
| 2342764 | 69309 | None | code23 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (P.No. 104, I.No. 12.54 VOL 2 of PWP & IWTD SR 2023-24) | m | 349.8 | 349.8 | 28.5 | False | None | None | False | None | False | 9969.3 | 0 |
| 2342765 | 69309 | None | code24 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do- with both side prelam.(P.No. 104, I.No. 12.55.1 VOL 2 of PWP & IWTD SR 2023-24) | Sqm | 2602.6 | 2602.6 | 6.75 | False | None | None | False | None | False | 17567.55 | 0 |
| 2342766 | 69309 | None | code25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 25mm nominal dia pipes.(P.NO. 122 I.No. 13.32.3 VOL 2 of PWP & IWTD SR 2023-24 ) | m | 524.7 | 524.7 | 30.0 | False | None | None | False | None | False | 15741.0 | 0 |
| 2342767 | 69309 | None | code26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 32mm nominal dia pipes.(P.NO.122 I.No. 13.32.4 VOL 2 of PWP & IWTD SR 2023-24) | m | 612.7 | 612.7 | 25.0 | False | None | None | False | None | False | 15317.5 | 0 |
| 2342768 | 69309 | None | code27 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(P.No. 191, I.NO.16.8 VOL 5 of PWP & IWTD SR 2023-24 ) | Each | 5270.1 | 5270.1 | 2.0 | False | None | None | False | None | False | 10540.2 | 0 |
| 2342769 | 69309 | None | code28 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc HDPE Grade PE100-PN6.0,200mm dia..(P.No. 102, I.NO. 9.10.9,VOL 5 SR 2023-24) | m | 1355.2 | 1355.2 | 10.0 | False | None | None | False | None | False | 13552.0 | 0 |
| 2342770 | 69309 | None | code29 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (P.No. 117, I.No. 13.2.2 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 335.5 | 335.5 | 8.0 | False | None | None | False | None | False | 2684.0 | 0 |
| 2342771 | 69309 | None | code30 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore(P.No. 117, I.No. 13.3.2 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 335.5 | 335.5 | 10.0 | False | None | None | False | None | False | 3355.0 | 0 |
| 2342772 | 69309 | None | code31 | providing and fixing square-mouth S. W. gully trap class SP-1 complete with C.1. grating brick masonry chamber 150 x100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover t5 be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:.( P.NO. 124 , I.No. 13.39 VOL 2 of PWP & IWTD SR 2023-24) | Each | 2839.1 | 2839.1 | 6.0 | False | None | None | False | None | False | 17034.6 | 0 |
| 2342773 | 69309 | None | code32 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia.(P.No. 120, I.No. 13.22.1VOL 2of PWP & IWTD SR 2023-24 ) | Nos | 45.1 | 45.1 | 10.0 | False | None | None | False | None | False | 451.0 | 0 |
| 2342774 | 69309 | None | code33 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (P.No. 136, I.No. 14.31 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 1342.0 | 1342.0 | 2.0 | False | None | None | False | None | False | 2684.0 | 0 |
| 2342775 | 69309 | None | code34 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern(P.No. 131, I.No. 14.4.2 of PWP & IWTDSR 2023-24,Vol-II ) | Each | 7462.4 | 7462.4 | 3.0 | False | None | None | False | None | False | 22387.2 | 0 |
| 2342776 | 69309 | None | code35 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.(P.No.119 , I.No.13.14 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 930.6 | 930.6 | 2.0 | False | None | None | False | None | False | 1861.2 | 0 |
| 2342777 | 69309 | None | code36 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(P.No135 , I.No.14.22A VOL 2 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 891.0 | 891.0 | 2.0 | False | None | None | False | None | False | 1782.0 | 0 |
| 2342778 | 69309 | None | code37 | Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (P.No. 1, I.No. 1.2 VOL 6 of PWD Ele SR 2023-24 ) 1.2.1) 19/20mm dia 2mm thick | m | 66.0 | 66.0 | 40.0 | False | None | None | False | None | False | 2640.0 | 0 |
| 2342779 | 69309 | None | code38 | Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (P.No. 1, I.No. 1.2 VOL 6 of PWD Ele SR 2023-24 ) 1.2.2) 25mm dia 2mm thick | m | 78.0 | 78.0 | 40.0 | False | None | None | False | None | False | 3120.0 | 0 |
| 2342780 | 69309 | None | code39 | Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (P.No. 1, I.No. 1.2 VOL 6 of PWD Ele SR 2023-24 1.2.3) 32mm dia 2.5mm thick | m | 103.0 | 103.0 | 30.0 | False | None | None | False | None | False | 3090.0 | 0 |
| 2342781 | 69309 | None | code40 | PVC pipe-50mm dia (P.No. 37, Sl.No. 24, VOL 6 of BESCOM SR 2023-24 ) | Mtr | 88.0 | 88.0 | 100.0 | False | None | None | False | None | False | 8800.0 | 0 |
| 2342782 | 69309 | None | code41 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (P.No. 1, I.No. 1.3 VOL 6 of PWD Ele SR 2023-24 ) 1.3.1) 19/20 mm dia 2 mm thick | m | 68.0 | 68.0 | 20.0 | False | None | None | False | None | False | 1360.0 | 0 |
| 2342783 | 69309 | None | code42 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (P.No. 1, I.No. 1.3 VOL 6 of PWD Ele SR 2023-24 ) 1.3.2) 25 mm dia 2 mm thick | m | 79.0 | 79.0 | 30.0 | False | None | None | False | None | False | 2370.0 | 0 |
| 2342784 | 69309 | None | code43 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (P.No. 1, I.No. 1.3 VOL 6 of PWD Ele SR 2023-24 ) 1.3.3) 32 mm dia 2.5 mm thick | m | 99.0 | 99.0 | 20.0 | False | None | None | False | None | False | 1980.0 | 0 |
| 2342785 | 69309 | None | code44 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Point wiring using Copper wire without Switch. (P.No.5 , I.No. 2.2 VOL 6, of PWD Ele SR 2023-24) 2.2.1)Short point upto 3Mtr from tapping point to out let via switch box | Nos | 269.0 | 269.0 | 10.0 | False | None | None | False | None | False | 2690.0 | 0 |
| 2342786 | 69309 | None | code45 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Point wiring using Copper wire without Switch. (P.No.5 , I.No. 2.2 VOL 6, of PWD Ele SR 2023-24) 2.2.2)Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box | Nos | 379.0 | 379.0 | 10.0 | False | None | None | False | None | False | 3790.0 | 0 |
| 2342787 | 69309 | None | code46 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Point wiring using Copper wire without Switch. (P.No.5 , I.No. 2.2 VOL 6, of PWD Ele SR 2023-24) 2.2.4)Two outlet in a row,above 3Mtr upto 6Mtr from tapping point to out let via switches | Nos | 677.0 | 677.0 | 12.0 | False | None | None | False | None | False | 8124.0 | 0 |
| 2342788 | 69309 | None | code47 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Point wiring using Copper wire without Switch. (P.No.5 , I.No. 2.2 VOL 6, of PWD Ele SR 2023-24) 2.2.5)Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches box | Nos | 989.0 | 989.0 | 10.0 | False | None | None | False | None | False | 9890.0 | 0 |
| 2342789 | 69309 | None | code48 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (P.No. 8, I.No. 3.4 VOL 6 of PWD Ele SR 2023-24 ) 3.4.1) 1-3Way | Each | 138.0 | 138.0 | 4.0 | False | None | None | False | None | False | 552.0 | 0 |
| 2342790 | 69309 | None | code49 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (P.No. 8, I.No. 3.4 VOL 6 of PWD Ele SR 2023-24 ) 3.4.2) 4-5Way | Each | 159.0 | 159.0 | 4.0 | False | None | None | False | None | False | 636.0 | 0 |
| 2342791 | 69309 | None | code50 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring.(P.No. 5, I.No. 2.3 VOL 6 of PWD Ele SR 2023-24 ) 2.3.2) 1.5 sqmm | Mtr | 26.0 | 26.0 | 30.0 | False | None | None | False | None | False | 780.0 | 0 |
| 2342792 | 69309 | None | code51 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring.(P.No. 5, I.No. 2.3 VOL 6 of PWD Ele SR 2023-24 ) 2.3.3) 2.5 sqmm | Mtr | 42.0 | 42.0 | 30.0 | False | None | None | False | None | False | 1260.0 | 0 |
| 2342793 | 69309 | None | code52 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box..(P.No. 8, I.No. 3.5 VOL 6 of PWD Ele SR 2023-24 ) 3.5.1) 1 to 3 Module | Each | 137.0 | 137.0 | 4.0 | False | None | None | False | None | False | 548.0 | 0 |
| 2342794 | 69309 | None | code53 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box..(P.No. 8, I.No. 3.5 VOL 6 of PWD Ele SR 2023-24 ) 3.5.2) 4 Module | Each | 161.0 | 161.0 | 4.0 | False | None | None | False | None | False | 644.0 | 0 |
| 2342795 | 69309 | None | code54 | Supplying and fixing regular MCB distribution boards on wall/oodboard / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. (P.No. 18, I.No. 5.19 VOL 6 of PWD Ele SR 2023-24) 5.19.8) 8Way SP & N | Each | 1854.0 | 1854.0 | 1.0 | False | None | None | False | None | False | 1854.0 | 0 |
| 2342796 | 69309 | None | code55 | Supplying and fixing regular MCB distribution boards on wall/oodboard / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. (P.No. 18, I.No. 5.19 VOL 6 of PWD Ele SR 2023-24) 5.19.9) 12Way SP & N | Each | 2329.0 | 2329.0 | 1.0 | False | None | None | False | None | False | 2329.0 | 0 |
| 2342797 | 69309 | None | code56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia (P.No.54, I.No. 12.56 VOL 6 of PWD Ele SR 2023-24 ) | Each | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 |
| 2342798 | 69309 | None | code57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. (P.No.54, I.No. 12.56 VOL 6 of PWD Ele SR 2023-24) | Each | 4256.0 | 4256.0 | 1.0 | False | None | None | False | None | False | 4256.0 | 0 |
| 2342799 | 69309 | None | code58 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (P.No. 54, I.No. 12.58 of PWD Ele SR 2023-24 ) GI strip ((12.58.2)25x6mm) | Mtr | 128.0 | 128.0 | 20.0 | False | None | None | False | None | False | 2560.0 | 0 |
| 2342800 | 69309 | None | code59 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (P.No. 54, I.No. 12.58 of PWD Ele SR 2023-24 ) Copper strip ((12.58.1)25x3mm) | Mtr | 82.0 | 82.0 | 20.0 | False | None | None | False | None | False | 1640.0 | 0 |
| 2342801 | 69309 | None | code60 | Supplying of recess mounting non integrated type LED down light 15 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI 70 efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5 of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. (P.No. 44, I.No. 11.4.3 VOL 6 of PWD Ele SR 2023-24 ) | Each | 1671.0 | 1671.0 | 4.0 | False | None | None | False | None | False | 6684.0 | 0 |
| 2342802 | 69309 | None | code61 | Supplying exhaust fan of 1440 RPM of 300 mm (12'') size with bracket blades complete for light duty suitable for operate of 230V 50Hz, AC Supply. (P.No. 30, I.No. 6.1 VOL 6 of PWD Ele SR 2023-24 ) | Each | 1542.0 | 1542.0 | 2.0 | False | None | None | False | None | False | 3084.0 | 0 |
| 2342803 | 69309 | None | code62 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same with CM 1:4 etc. complete as per
direction of Engineer-in-charge. (P.No. 202, I.No. 20.45 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 243.1 | 243.1 | 2.0 | False | None | None | False | None | False | 486.2 | 0 |
| 2342804 | 69309 | None | code63 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge to the appropriate disposal area. (P.No. 193, I.No.19.59 of PWP & IWTD SR 2023-24) | Cum | 400.4 | 400.4 | 5.0 | False | None | None | False | None | False | 2002.0 | 0 |