createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1705593276554 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1750.00 emd 70000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-02-2024 16:30:00 tenderQueryClose 08-02-2024 17:30:00 technicalBidOpen 12-02-2024 16:00:00 publishedDate 31-01-2024 18:36:26 publishedByPost PWD_EE_DIV_KLB publishedByUser KPE14204 - SUBHASH L SHIXNAKAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Executive Engineer PWD Division Kalaburgi splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08472256652 mobileNumber 9448652632 tenderSupplierList None
tenderSchedule	createdTs 1705593276591 version 7 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT7549 title CONSTRUCTION OF FOUR CLASS ROOM TO GOVERNMENT HIGHER PRIMARY & HIGH SCHOOL AT BIRAL (B) VILLAGE IN JEWARGI TALUKA DIST KALABURAGI UNDER KKRDB MICRO FOR THE YEAR 2023-24(KLB231023364) (Reserved for SC category) description CONSTRUCTION OF FOUR CLASS ROOM TO GOVERNMENT HIGHER PRIMARY & HIGH SCHOOL AT BIRAL (B) VILLAGE IN JEWARGI TALUKA DIST KALABURAGI UNDER KKRDB MICRO FOR THE YEAR 2023-24(KLB231023364) (Reserved for SC category) category WORKS categoryText Works ecv 6978034.59 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1689 locationName PWD Division Office Kalaburagi provisionalAmount 8250000.0 groupOverheadTotal 0.0 fileNumber PWD/SD/JEW/2022-23/KKRDB/6
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1705593277000 0 None None Buildings CONSTRUCTION OF FOUR CLASS ROOM TO GOVERNMENT HIGHER PRIMARY & HIGH SCHOOL AT BIRAL (B) VILLAGE IN JEWARGI TALUKA DIST KALABURAGI UNDER KKRDB MICRO FOR THE YEAR 2023-24 3883216.84 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2221924 65038 None Item No.1.5.1 Page No.6, Vol - I PWD CSR - 2023-24 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 313.95 313.95 127.3 False None None False None False 39965.835 0 2221925 65038 None Item No.1.9, Page No.7, Vol - I Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 101.83 False None None False None False 28441.119 0 2221926 65038 None Item No. 1.8, Page No.7, Vol - I Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 497.7 497.7 119.97 False None None False None False 59709.069 0 2221927 65038 None Item No.2.1.2, Page No.15, Vol - I Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 26.47 False None None False None False 157422.384 0 2221928 65038 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 10.57 False None None False None False 73583.055 0 2221929 65038 None Vol-I S R Sl no. 1 (b) page no. 111 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Foundation upto Plinth All other types add 8 Percent Cum 556.92 556.92 10.57 False None None False None False 5886.6444 0 2221930 65038 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 9.56 False None None False None False 66551.94 0 2221931 65038 None Vol-I S R Sl No. 9 page No. 111 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70 percent Cum 4873.05 4873.05 9.56 False None None False None False 46586.358 0 2221932 65038 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 8.18 False None None False None False 56945.07 0 2221933 65038 None Vol-I S R Sl no. 2 Page No. 111 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings add 50 Percent Cum 3480.75 3480.75 8.18 False None None False None False 28472.535 0 2221934 65038 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 19.22 False None None False None False 133800.03 0 2221935 65038 None Vol-I S R Sl no. 14 Page No. 112 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding RCC Beams, Lintels & Troughs of Aqueducts add 60 Percent Cum 4176.9 4176.9 19.22 False None None False None False 80280.018 0 2221936 65038 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 33.79 False None None False None False 235229.085 0 2221937 65038 None Vol-I S R SL no. 15 Page No. 112 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs add 50 Percent Cum / K 3480.75 3480.75 33.79 False None None False None False 117614.5425 0 2221938 65038 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 0.4 False None None False None False 2784.6 0 2221939 65038 None Vol-I S R SL No. 19 Page No. 112 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding Chejjas, Canopy & Other Architectural projections of minor sections add 45 Perecnt Cum 3132.67 3132.67 0.4 False None None False None False 1253.068 0 2221940 65038 None Item No.5.1.1, Page No.9, Vol - 2 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 55.13 False None None False None False 324801.1515 0 2221941 65038 None Item No.5.4, Page No.9, Vol - 2 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 33.94 False None None False None False 227684.793 0 2221942 65038 None Item No.6.8, Page No.14, Vol - 2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 68.64 False None None False None False 574341.768 0 2221943 65038 None Item No.8.2.2, Page No.41, Vol - 2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-Charge Sqm 292.95 292.95 530.94 False None None False None False 155538.873 0 2221944 65038 None Item No.8.1.2, Page No.41, Vol - 2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 253.05 253.05 215.45 False None None False None False 54519.6225 0 2221945 65038 None Item No.12.13.1 Page No.100, Vol - 2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.33 False None None False None False 34239.3975 0 2221946 65038 None Item No.12.21 Page No.100, Vol - 2 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 6029.1 6029.1 7.56 False None None False None False 45579.996 0 2221947 65038 None Item No.12.51 Page No.104, Vol - 2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1066.8 1066.8 4.0 False None None False None False 4267.2 0 2221948 65038 None Item No. 9.35 Page No.64, Vol - 2 Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1717.8 1717.8 228.22 False None None False None False 392036.316 0 2221949 65038 None Item No.11.44 Page No.91, Vol - 2 Providing and fixing double glazed hermetically sealed glazing in alu minium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4562.25 4562.25 23.76 False None None False None False 108399.06 0 2221950 65038 None Item No.11.34.B Page No.86, Vol - 2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 192.15 192.15 498.96 False None None False None False 95875.164 0 2221951 65038 None Item No.8.34.1 Page No.47, Vol - 2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge. Sqm 55.65 55.65 19.66 False None None False None False 1094.079 0 2221952 65038 None Item No.8.33.2 Page No.46, Vol - 2 Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 144.9 144.9 19.66 False None None False None False 2848.734 0 2221953 65038 None Item No.8.33.3 Page No.47, Vol - 2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.95 145.95 23.76 False None None False None False 3467.772 0 2221954 65038 None Item No.8.51, Page No.50, Vol - 2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 105.0 105.0 609.32 False None None False None False 63978.6 0 2221955 65038 None Item No.8.25, Page No.45, Vol - 2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 609.32 False None None False None False 87650.682 0 2221956 65038 None Item No.8.29, Page No.45, Vol - 2 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 297.15 297.15 149.47 False None None False None False 44415.0105 0 2221957 65038 None Item No.2.11 (a) Vol-I 2023-24 S R Page No. 18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings t 93929.85 93929.85 5.52 False None None False None False 518492.772 0 2221958 65038 None I No. 8.7 Vol-III 2023-24 S R Page No. 65 Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Sqm 9460.5 9460.5 1.0 False None None False None False 9460.5 0 1705593277000 0 None None Buildings FISRT FLOOR 2821135.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2221959 65039 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7031.11 7031.11 9.56 False None None False None False 67217.4116 0 2221960 65039 None Vol-I S R Sl No. 9 page No. 111 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70 percent Cum 4921.78 4921.78 9.56 False None None False None False 47052.2168 0 2221961 65039 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7031.11 7031.11 19.47 False None None False None False 136895.7117 0 2221962 65039 None Vol-I S R Sl no. 14 Page No. 112 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding RCC Beams, Lintels & Troughs of Aqueducts add 60 Percent Cum 4218.67 4218.67 19.47 False None None False None False 82137.5049 0 2221963 65039 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7031.11 7031.11 33.79 False None None False None False 237581.2069 0 2221964 65039 None Vol-I S R SL no. 15 Page No. 112 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs add 50 Percent Cum / K 3515.56 3515.56 33.79 False None None False None False 118790.7724 0 2221965 65039 None Item No.2.5.1, Page No.16, Vol - I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7031.11 7031.11 0.4 False None None False None False 2812.444 0 2221966 65039 None Vol-I S R SL No. 19 Page No. 112 Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding Chejjas, Canopy & Other Architectural projections of minor sections add 45 Perecnt Cum 3164.0 3164.0 0.4 False None None False None False 1265.6 0 2221967 65039 None Item No.6.8, Page No.14, Vol - 2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8451.12 8451.12 68.64 False None None False None False 580084.8768 0 2221968 65039 None Item No.8.2.2, Page No.41, Vol - 2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-Charge Sqm 295.88 295.88 530.94 False None None False None False 157094.5272 0 2221969 65039 None Item No.8.1.2, Page No.41, Vol - 2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 255.58 255.58 226.31 False None None False None False 57840.3098 0 2221970 65039 None Item No.12.13.1 Page No.100, Vol - 2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 104793.31 104793.31 0.33 False None None False None False 34581.7923 0 2221971 65039 None Item No.12.21 Page No.100, Vol - 2 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 6089.39 6089.39 7.56 False None None False None False 46035.7884 0 2221972 65039 None Item No.12.51 Page No.104, Vol - 2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1077.47 1077.47 4.0 False None None False None False 4309.88 0 2221973 65039 None Item No. 9.12.2 Page No.60, Vol - 2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1214.27 1214.27 239.08 False None None False None False 290307.6716 0 2221974 65039 None Item No.11.44 Page No.91, Vol - 2 Providing and fixing double glazed hermetically sealed glazing in alu minium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4607.87 4607.87 23.76 False None None False None False 109482.9912 0 2221975 65039 None Item No.11.34.B Page No.86, Vol - 2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 194.07 194.07 498.96 False None None False None False 96833.1672 0 2221976 65039 None Item No.8.34.1 Page No.47, Vol - 2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge. Sqm 56.21 56.21 19.66 False None None False None False 1105.0886 0 2221977 65039 None Item No.8.33.2 Page No.46, Vol - 2 Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 146.35 146.35 19.66 False None None False None False 2877.241 0 2221978 65039 None Item No.8.33.3 Page No.47, Vol - 2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 147.41 147.41 23.76 False None None False None False 3502.4616 0 2221979 65039 None Item No.8.51, Page No.50, Vol - 2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 106.05 106.05 609.32 False None None False None False 64618.386 0 2221980 65039 None Item No.8.25, Page No.45, Vol - 2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.29 145.29 609.32 False None None False None False 88528.1028 0 2221981 65039 None Item No.8.29, Page No.45, Vol - 2 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 300.12 300.12 149.47 False None None False None False 44858.9364 0 2221982 65039 None Item No.2.11 (a) Vol-I 2023-24 S R Page No. 18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings t 93859.15 93859.15 5.81 False None None False None False 545321.6615 0 1705593277000 0 None None Buildings ELECTRICAL WORK 273682.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2221983 65040 None 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Mtr 66.0 66.0 400.0 False None None False None False 26400.0 0 2221984 65040 None 1.3.2 Supplying heavy gauge PVC Conduit Pipe .dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick Mtr 79.0 79.0 400.0 False None None False None False 31600.0 0 2221985 65040 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box Mtr 56.0 56.0 20.0 False None None False None False 1120.0 0 2221986 65040 None 1.6.3 Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x178x76mm) Mtr 112.0 112.0 16.0 False None None False None False 1792.0 0 2221987 65040 None 1.12 Supplying And Fixing Metal Fan Box with Round Hook. No 160.0 160.0 16.0 False None None False None False 2560.0 0 2221988 65040 None 2.1.1 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch Point 285.0 285.0 16.0 False None None False None False 4560.0 0 2221989 65040 None 2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 394.0 394.0 16.0 False None None False None False 6304.0 0 2221990 65040 None 2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 570.0 570.0 16.0 False None None False None False 9120.0 0 2221991 65040 None 2.5.2 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5Sq.mm Mtr 72.0 72.0 400.0 False None None False None False 28800.0 0 2221992 65040 None 2.5.3 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5Sq.mm Mtr 94.0 94.0 400.0 False None None False None False 37600.0 0 2221993 65040 None Electrical DSR It.no 3.1.1 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6Amps 2 Way Each 128.0 128.0 16.0 False None None False None False 2048.0 0 2221994 65040 None 3.14.2 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch No 70.0 70.0 16.0 False None None False None False 1120.0 0 2221995 65040 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module Each 137.0 137.0 76.0 False None None False None False 10412.0 0 2221996 65040 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module Each 234.0 234.0 20.0 False None None False None False 4680.0 0 2221997 65040 None 3.8 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Sq CM 0.41 0.41 80000.0 False None None False None False 32800.0 0 2221998 65040 None 6.3.2 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. Each 3031.0 3031.0 16.0 False None None False None False 48496.0 0 2221999 65040 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076 twin twisted PVC insulatedwires, required Nos of round blocks and clamps. Each 122.0 122.0 32.0 False None None False None False 3904.0 0 2222000 65040 None 13.11 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 315.0 315.0 16.0 False None None False None False 5040.0 0 2222001 65040 None 5.19.12 Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. Each 4940.0 4940.0 2.0 False None None False None False 9880.0 0 2222002 65040 None 5.18.1 Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898 Each 415.0 415.0 6.0 False None None False None False 2490.0 0 2222003 65040 None 5.18.4 Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898. Each 739.0 739.0 4.0 False None None False None False 2956.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1705593279000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1705593279000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory. None 1705593279000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of kppp portal on or before the last date and time of bid submission. None 1706493774000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1706493778000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1706493783000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1706493789000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1706493791000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1706493796000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1706493802000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification. None 1706493873000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive). None 1706493886000 0 None None ELIGIBILITY The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification. None 1706493891000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder None 1706493896000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason. None 1706493900000 0 None None ELIGIBILITY The defect liability period for this work is 365 days None 1706493903000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing kppp portal. None 1706493909000 0 None None ELIGIBILITY The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts None 1706493913000 0 None None ELIGIBILITY The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules and any modifications before and after execution of agreement None 1706493919000 0 None None ELIGIBILITY After the award of the contract, the contractor has to furnish the details in respect of labour employed and the EPF details for this work in every RA bill. None 1706493925000 0 None None ELIGIBILITY Bidders are advised to note that , 18% GST will be added to the contract amount. None 1706493929000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2023-24 in the Technical Qualification Criteria mentioned in the next section. None 1706493933000 0 None None ELIGIBILITY The bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected. None 1706494002000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1706494010000 0 None None ELIGIBILITY The work should be completed in 06 (Six) Months ( including monsoon) None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23 a) a) Achieved in at least two financial years an average financial turnover (in all classes of civil engineering construction works only) of Rs. 69.78lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23 b) Satisfactorily completed, as prime contractor, at least one any nature or similar work such as Building Work of value not less than Rs. 17.44Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20 2020-21, 2021-22 & 2022-23 c) Executed in any one year, the following minimum quantities of work: 1) PCC/RCC 137.00Cum, 2) BBM/SSM 136.98Cum 3) Plaster 1050.91Sqm 4) TMT 9.06 Tonne Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None As per the Govt Order No: FD 263 EXP-12/2022 Bangelore Dated: 11.05.2022 as per condition no 3 relaxation of machinery upto Rs. 300.00 Lakhs i.e. KW-3 & KW-4 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format-8 and scanned copies of the owership Documents & Hire commitment Agreements None None None None Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Biodata of the personnel None None None None Liquid Assets and /or availability of credit facilities of no less than Rs. 20.93lakhs (Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Report on the financial standing of the Tenderer, such as profit and loss statements and auditors report for the last five years. Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Latest Income Tax Clearance Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Assessed Tender Capacity shall be more than the Tendered Amount Others Assessed Tender Capacity createdTs version createdDate modifiedDate documentName None None None None Others -- Assessement on the Letter Head of the Tenderer None None None None Constitutional or Legal Status of the Tenderer Others Legal Status createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Information of the works for which Tender acceptance letters are received. Others New Works createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format-6 and Letter of Acceptance None None None None Information on works which are yet to be completed Others Pending work createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format-5 and Certificates in Format-3 None None None None Information of the works for which Tenderer has submitted Tender. Others Tendered works createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format-7 None None None None The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion. Others CPM/PERT createdTs version createdDate modifiedDate documentName None None None None Others -- CPM/PERT Chart
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate having UDIN True Technical Bid PWD Contractor Registration certificate True Technical Bid Any nature of Work done or one similar work done certificate 25percent of APT to qualify Quanitiy True Technical Bid SC Reserved Category certificate and domicile certificate True Technical Bid Line of credit True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None