| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1706648507000 | 0 | None | None | Buildings | Construction of 2 Room to Govt Model Primary School in Revoor Village in Jewargi Taluka. Under KKRDB Micro for the year 2023-24(KLB231023358) | 1561089.36 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2343624 | 69328 | None | PWD DSR 2023-24 IT.NO 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. | Cum | 2547.3 | 2547.3 | 9.64 | False | None | None | False | None | False | 24555.972 | 0 | | 2343625 | 69328 | None | PWD DSR 2023-24 IT.NO 19.4 | Demolishing R.B. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. | Cum | 2282.7 | 2282.7 | 4.61 | False | None | None | False | None | False | 10523.247 | 0 | | 2343626 | 69328 | None | PWD DSR 2023-24 IT.NO 1.5.1 | Earth work excavation by manual means for drains,canals, waste weir draft,
approach channels, key trench, foundation of Bridges and such similar works,
as per drawing and technical specifications, including setting out, shoring,
strutting, barricading, caution lights, excavated surface leveled and sides neatly
dressed disposing off or leveling the excavated stuff or sorting & stacking the
selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost
of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth | Cum | 313.95 | 313.95 | 53.1 | False | None | None | False | None | False | 16670.745 | 0 | | 2343627 | 69328 | None | PWD DSR 2023-24 IT.NO 19.7.1 | Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. | Cum | 506.1 | 506.1 | 25.79 | False | None | None | False | None | False | 13052.319 | 0 | | 2343628 | 69328 | None | PWD DSR 2023-24 IT.NO 2.1.2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 6.26 | False | None | None | False | None | False | 37229.472 | 0 | | 2343629 | 69328 | None | PWD DSR 2023-24 IT.NO 2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 27.91 | False | None | None | False | None | False | 194295.465 | 0 | | 2343630 | 69328 | None | Vol-I S R Sl no. 1(b) Page No. 111 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for Foundation upto Plinth All other types add 3 Percent | Cum | 208.84 | 208.84 | 5.83 | False | None | None | False | None | False | 1217.5372 | 0 | | 2343631 | 69328 | None | Vol-I S R Sl no. 9 Page No. 111 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70 Percent | Cum | 4873.05 | 4873.05 | 4.0 | False | None | None | False | None | False | 19492.2 | 0 | | 2343632 | 69328 | None | Vol-I S R Sl no. 2 Page No. 111 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for Plinth Beams of Buildings add 50 Percent | Cum | 3480.75 | 3480.75 | 2.53 | False | None | None | False | None | False | 8806.2975 | 0 | | 2343633 | 69328 | None | Vol-I S R No. 14 Page No. 112 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts add 60 Percent | Cum | 4176.9 | 4176.9 | 5.48 | False | None | None | False | None | False | 22889.412 | 0 | | 2343634 | 69328 | None | Vol-I SR Sl no. 15 Page No. 112 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for RCC Roof Slabs add 50 Percent | Cum | 3480.75 | 3480.75 | 9.93 | False | None | None | False | None | False | 34563.8475 | 0 | | 2343635 | 69328 | None | Vol-I S R Sl no. 19 Page No.112 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of
minor sections add 45 Percent | Cum | 3132.67 | 3132.67 | 0.14 | False | None | None | False | None | False | 438.5738 | 0 | | 2343636 | 69328 | None | PWD DSR 2023-24 IT.NO 5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5891.6 | 5891.6 | 16.51 | False | None | None | False | None | False | 97270.316 | 0 | | 2343637 | 69328 | None | PWD DSR 2023-24 IT.NO 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6708.5 | 6708.5 | 11.74 | False | None | None | False | None | False | 78757.79 | 0 | | 2343638 | 69328 | None | PWD DSR 2023-24 IT.NO 2.11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. | t | 93929.9 | 93929.9 | 3.35 | False | None | None | False | None | False | 314665.165 | 0 | | 2343639 | 69328 | None | PWD DSR 2023-24 IT.NO 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 30.34 | False | None | None | False | None | False | 8473.962 | 0 | | 2343640 | 69328 | None | PWD DSR 2023-24 IT.NO 1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 88.72 | False | None | None | False | None | False | 44155.944 | 0 | | 2343641 | 69328 | None | PWD DSR 2023-24 IT.NO 6.7 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8621.6 | 8621.6 | 17.28 | False | None | None | False | None | False | 148981.248 | 0 | | 2343642 | 69328 | None | PWD DSR 2023-24 IT.NO 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 130412.1 | 130412.1 | 0.32 | False | None | None | False | None | False | 41731.872 | 0 | | 2343643 | 69328 | None | PWD DSR 2021-22 IT.NO 11.34B | Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kg | 192.2 | 192.2 | 108.0 | False | None | None | False | None | False | 20757.6 | 0 | | 2343644 | 69328 | None | PWD DSR 2023-24 IT.NO 8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 52.5 | 52.5 | 9.72 | False | None | None | False | None | False | 510.3 | 0 | | 2343645 | 69328 | None | PWD DSR 2023-24 IT.NO 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 120.8 | 120.8 | 9.72 | False | None | None | False | None | False | 1174.176 | 0 | | 2343646 | 69328 | None | PWD DSR 2023-24 IT.NO 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | No | 1066.8 | 1066.8 | 1.0 | False | None | None | False | None | False | 1066.8 | 0 | | 2343647 | 69328 | None | PWD DSR 2023-24 IT.NO 12.52 | Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | No | 811.7 | 811.7 | 3.0 | False | None | None | False | None | False | 2435.1 | 0 | | 2343648 | 69328 | None | PWD DSR 2023-24 IT.NO 8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.8 | 267.8 | 52.45 | False | None | None | False | None | False | 14046.11 | 0 | | 2343649 | 69328 | None | PWD DSR 2023-24 IT.NO 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a
top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement
: 3 coarse sand) finished rough with sponge to brick masonry including
rounding off corners wherever required smooth rendering, providing and
removing scaffolding, including cost of materials, labour, curing complete
as per specifications and as per directions of Engineer-in-charge. | Sqm | 404.25 | 404.25 | 206.2 | False | None | None | False | None | False | 83356.35 | 0 | | 2343650 | 69328 | None | PWD DSR 2023-24 IT.NO 2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 5.25 | False | None | None | False | None | False | 34271.2125 | 0 | | 2343651 | 69328 | None | PWD DSR 2023-24 IT.NO 9.35 | Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1717.8 | 1717.8 | 73.28 | False | None | None | False | None | False | 125880.384 | 0 | | 2343652 | 69328 | None | PWD DSR 2023-24 IT.NO 12.21 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6029.1 | 6029.1 | 2.52 | False | None | None | False | None | False | 15193.332 | 0 | | 2343653 | 69328 | None | PWD DSR 2023-24 IT.NO 12.32 | Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6134.1 | 6134.1 | 4.32 | False | None | None | False | None | False | 26499.312 | 0 | | 2343654 | 69328 | None | PWD DSR 2023-24 IT.NO 12.58 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | No | 126.0 | 126.0 | 1.0 | False | None | None | False | None | False | 126.0 | 0 | | 2343655 | 69328 | None | PWD DSR 2023-24 IT.NO 12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete | No | 248.85 | 248.85 | 11.0 | False | None | None | False | None | False | 2737.35 | 0 | | 2343656 | 69328 | None | PWD DSR 2023-24 IT.NO 12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | No | 136.5 | 136.5 | 20.0 | False | None | None | False | None | False | 2730.0 | 0 | | 2343657 | 69328 | None | PWD DSR 2023-24 IT.NO 12.71.1 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. | No | 312.9 | 312.9 | 21.0 | False | None | None | False | None | False | 6570.9 | 0 | | 2343658 | 69328 | None | PWD DSR 2023-24 IT.NO 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 143.85 | 143.85 | 163.91 | False | None | None | False | None | False | 23578.4535 | 0 | | 2343659 | 69328 | None | PWD DSR 2023-24 IT.NO 8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality
to give an even shade, after thoroughly brooming the surface to remove all
dirt, dust, mortar drops and foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge. | Sqm | 182.7 | 182.7 | 101.94 | False | None | None | False | None | False | 18624.438 | 0 | | 2343660 | 69328 | None | PWD DSR 2023-24 IT.NO 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 55.65 | 55.65 | 15.39 | False | None | None | False | None | False | 856.4535 | 0 | | 2343661 | 69328 | None | PWD DSR 2023-24 IT.NO 8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 144.9 | 144.9 | 15.39 | False | None | None | False | None | False | 2230.011 | 0 | | 2343662 | 69328 | None | PWD DSR 2023-24 IT.NO 8.84 | Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. | Sqm | 498.75 | 498.75 | 5.76 | False | None | None | False | None | False | 2872.8 | 0 | | 2343663 | 69328 | None | Vol-2 I No. 8.51 Page No. 50 | Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
specifications and as per directions of Engineer in charge. | Sqm | 105.0 | 105.0 | 163.91 | False | None | None | False | None | False | 17210.55 | 0 | | 2343664 | 69328 | None | Vol-2 I No. 11.28 Page No. 85 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners, stainless
steel bolts etc., of required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of Engineer-in- charge,
(for payment purpose only weight of stainless steel members shall be
considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
including cost of materials, labour, usage charges of machinery complete
as per specifications and as per directions of the Engineer-in-Charge. | Kg | 593.25 | 593.25 | 51.3 | False | None | None | False | None | False | 30433.725 | 0 | | 2343665 | 69328 | None | Vol-3 I No. 16.31 Page No. 151 | Providing and fixing of typical Logo board as per
specifications and drawing. Two ACP Sheet of 3mm thick,
top and Bottom plate duly welded/bolted with MS Square
angle 25mm x25mmx 5mm size on back and on the edges.
The Top and Bottom plate will be welded/ bolted to 1
nos75x75x6 mm square Hallow section duly embedded in
cement concrete M15 Grade of 600*600*600 mm, 450 mm
below ground level.Retro-Reflecting Sheet as per IRC:67
made of encapsulated lens type reflective sheeting vide
Clause 1701.2.3 fixed over aluminium sheeting.All sections
of steel tube will be painted with primer and two coats of
epoxy paint as per drawing.Retro Reflective Trafic Sign As per IRC 67 Clause
1701.3.8.1 Class A Type-1 | No | 10156.65 | 10156.65 | 1.0 | False | None | None | False | None | False | 10156.65 | 0 |
| | 1706648507000 | 0 | None | None | Buildings | FIRST FLOOR | 1035615.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2343666 | 69329 | None | PWD DSR 2023-24 IT.NO 2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7031.11 | 7031.11 | 16.59 | False | None | None | False | None | False | 116646.1149 | 0 | | 2343667 | 69329 | None | Vol-I S R Sl no. 9 Page No. 111 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70 Percent | Cum | 4921.78 | 4921.78 | 2.5 | False | None | None | False | None | False | 12304.45 | 0 | | 2343668 | 69329 | None | Vol-I S R No. 14 Page No. 112 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts add 60 Percent | Cum | 4218.67 | 4218.67 | 5.48 | False | None | None | False | None | False | 23118.3116 | 0 | | 2343669 | 69329 | None | Vol-I SR Sl no. 15 Page No. 112 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for RCC Roof Slabs add 50 Percent | Cum | 3515.56 | 3515.56 | 8.47 | False | None | None | False | None | False | 29776.7932 | 0 | | 2343670 | 69329 | None | Vol-I S R Sl no. 19 Page No.112 | Addendum I-Percentage Additionalities for Formwork,
Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of
minor sections add 45 Percent | Cum | 3164.0 | 3164.0 | 0.14 | False | None | None | False | None | False | 442.96 | 0 | | 2343671 | 69329 | None | PWD DSR 2023-24 IT.NO 2.11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. | t | 94869.2 | 94869.2 | 1.99 | False | None | None | False | None | False | 188789.708 | 0 | | 2343672 | 69329 | None | PWD DSR 2023-24 IT.NO 6.7 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8707.82 | 8707.82 | 18.3 | False | None | None | False | None | False | 159353.106 | 0 | | 2343673 | 69329 | None | PWD DSR 2023-24 IT.NO 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 131716.22 | 131716.22 | 0.32 | False | None | None | False | None | False | 42149.1904 | 0 | | 2343674 | 69329 | None | PWD DSR 2021-22 IT.NO 11.34B | Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kg | 194.12 | 194.12 | 108.0 | False | None | None | False | None | False | 20964.96 | 0 | | 2343675 | 69329 | None | PWD DSR 2023-24 IT.NO 8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 53.02 | 53.02 | 9.72 | False | None | None | False | None | False | 515.3544 | 0 | | 2343676 | 69329 | None | PWD DSR 2023-24 IT.NO 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 122.01 | 122.01 | 9.72 | False | None | None | False | None | False | 1185.9372 | 0 | | 2343677 | 69329 | None | PWD DSR 2023-24 IT.NO 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | No | 1077.47 | 1077.47 | 1.0 | False | None | None | False | None | False | 1077.47 | 0 | | 2343678 | 69329 | None | PWD DSR 2023-24 IT.NO 12.52 | Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | No | 819.82 | 819.82 | 3.0 | False | None | None | False | None | False | 2459.46 | 0 | | 2343679 | 69329 | None | PWD DSR 2023-24 IT.NO 8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 270.48 | 270.48 | 52.45 | False | None | None | False | None | False | 14186.676 | 0 | | 2343680 | 69329 | None | PWD DSR 2023-24 IT.NO 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a
top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement
: 3 coarse sand) finished rough with sponge to brick masonry including
rounding off corners wherever required smooth rendering, providing and
removing scaffolding, including cost of materials, labour, curing complete
as per specifications and as per directions of Engineer-in-charge. | Sqm | 408.29 | 408.29 | 217.18 | False | None | None | False | None | False | 88672.4222 | 0 | | 2343681 | 69329 | None | PWD DSR 2023-24 IT.NO 2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6593.13 | 6593.13 | 0.3 | False | None | None | False | None | False | 1977.939 | 0 | | 2343682 | 69329 | None | PWD DSR 2023-24 IT.NO 9.35 | Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1734.98 | 1734.98 | 55.55 | False | None | None | False | None | False | 96378.139 | 0 | | 2343683 | 69329 | None | PWD DSR 2023-24 IT.NO 12.21 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6089.39 | 6089.39 | 2.52 | False | None | None | False | None | False | 15345.2628 | 0 | | 2343684 | 69329 | None | PWD DSR 2023-24 IT.NO 12.32 | Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6195.44 | 6195.44 | 4.32 | False | None | None | False | None | False | 26764.3008 | 0 | | 2343685 | 69329 | None | PWD DSR 2023-24 IT.NO 12.58 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | No | 127.26 | 127.26 | 1.0 | False | None | None | False | None | False | 127.26 | 0 | | 2343686 | 69329 | None | PWD DSR 2023-24 IT.NO 12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete | No | 251.34 | 251.34 | 11.0 | False | None | None | False | None | False | 2764.74 | 0 | | 2343687 | 69329 | None | PWD DSR 2023-24 IT.NO 12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | No | 137.86 | 137.86 | 20.0 | False | None | None | False | None | False | 2757.2 | 0 | | 2343688 | 69329 | None | PWD DSR 2023-24 IT.NO 12.71.1 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. | No | 316.03 | 316.03 | 21.0 | False | None | None | False | None | False | 6636.63 | 0 | | 2343689 | 69329 | None | PWD DSR 2023-24 IT.NO 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.29 | 145.29 | 185.08 | False | None | None | False | None | False | 26890.2732 | 0 | | 2343690 | 69329 | None | PWD DSR 2023-24 IT.NO 8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality
to give an even shade, after thoroughly brooming the surface to remove all
dirt, dust, mortar drops and foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge. | Sqm | 184.53 | 184.53 | 89.59 | False | None | None | False | None | False | 16532.0427 | 0 | | 2343691 | 69329 | None | PWD DSR 2023-24 IT.NO 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 56.21 | 56.21 | 15.39 | False | None | None | False | None | False | 865.0719 | 0 | | 2343692 | 69329 | None | PWD DSR 2023-24 IT.NO 8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 146.35 | 146.35 | 15.39 | False | None | None | False | None | False | 2252.3265 | 0 | | 2343693 | 69329 | None | PWD DSR 2023-24 IT.NO 8.84 | Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. | Sqm | 503.74 | 503.74 | 5.76 | False | None | None | False | None | False | 2901.5424 | 0 | | 2343694 | 69329 | None | Vol-2 I No. 8.51 Page No. 50 | Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
specifications and as per directions of Engineer in charge. | Sqm | 106.05 | 106.05 | 163.91 | False | None | None | False | None | False | 17382.6555 | 0 | | 2343695 | 69329 | None | Vol-2 I No. 6.7 Page No. 13 | Providing Brick work with common burnt clay Non Modular bricks of
class designation 3.5 in superstructure above plinth level in all shapes and
sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of
all materials, labour, scaffolding and usage charges of machinery & other
incidental charges complete as per the direction of engineer incharge of
work. | Cum | 8707.76 | 8707.76 | 6.84 | False | None | None | False | None | False | 59561.0784 | 0 | | 2343696 | 69329 | None | Vol-I I No. 2.1.4 Page No. 15 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators,
including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6593.13 | 6593.13 | 0.76 | False | None | None | False | None | False | 5010.7788 | 0 | | 2343697 | 69329 | None | Vol-II I No. 8.9 Page No. 42 | Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a
top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement
: 3 coarse sand) finished rough with sponge to brick masonry including
rounding off corners wherever required smooth rendering, providing and
removing scaffolding, including cost of materials, labour, curing complete
as per specifications and as per directions of Engineer-in-charge. | Sqm | 408.29 | 408.29 | 59.47 | False | None | None | False | None | False | 24281.0063 | 0 | | 2343698 | 69329 | None | Vol-II I No. 8.30 page No. 46 | Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality
to give an even shade, after thoroughly brooming the surface to remove all
dirt, dust, mortar drops and foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge | Sqm | 184.53 | 184.53 | 59.47 | False | None | None | False | None | False | 10973.9991 | 0 | | 2343699 | 69329 | None | Vol-5 I No. 10.1.6 Page No. 113 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete For:PVC pipes 90mm dia., 6 kg/sqcm & class 3 | m | 308.7 | 308.7 | 47.2 | False | None | None | False | None | False | 14570.64 | 0 |
| | 1706648507000 | 0 | None | None | Buildings | ELECTRICAL WORK | 198512.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2343700 | 69330 | None | Electrical DSR It.no 1.2.1 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,
metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick | Mtr | 66.0 | 66.0 | 350.0 | False | None | None | False | None | False | 23100.0 | 0 | | 2343701 | 69330 | None | Electrical DSR It.no 1.3.2 | Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick | Mtr | 79.0 | 79.0 | 350.0 | False | None | None | False | None | False | 27650.0 | 0 | | 2343702 | 69330 | None | Electrical DSR It.no 1.5.2 | Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box | Mtr | 49.0 | 49.0 | 10.0 | False | None | None | False | None | False | 490.0 | 0 | | 2343703 | 69330 | None | Electrical DSR It.no 1.6.3 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x178x76mm) | Each | 112.0 | 112.0 | 4.0 | False | None | None | False | None | False | 448.0 | 0 | | 2343704 | 69330 | None | Electrical DSR It.no 1.12 | Supplying And Fixing Metal Fan Box with Round Hook. | No | 160.0 | 160.0 | 4.0 | False | None | None | False | None | False | 640.0 | 0 | | 2343705 | 69330 | None | Electrical DSR It.no 2.1.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch | Point | 285.0 | 285.0 | 20.0 | False | None | None | False | None | False | 5700.0 | 0 | | 2343706 | 69330 | None | Electrical DSR It.no 2.1.2 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out
let via switch | Point | 394.0 | 394.0 | 20.0 | False | None | None | False | None | False | 7880.0 | 0 | | 2343707 | 69330 | None | Electrical DSR It.no 2.1.3 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out
let via switch | Point | 570.0 | 570.0 | 20.0 | False | None | None | False | None | False | 11400.0 | 0 | | 2343708 | 69330 | None | Electrical DSR It.no 2.5.2 | Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5Sq.mm | Mtr | 72.0 | 72.0 | 320.0 | False | None | None | False | None | False | 23040.0 | 0 | | 2343709 | 69330 | None | Electrical DSR It.no 2.5.3 | Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5Sq.mm | Mtr | 94.0 | 94.0 | 350.0 | False | None | None | False | None | False | 32900.0 | 0 | | 2343710 | 69330 | None | Electrical DSR It.no 3.1.1 | Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6Amps 2 Way | Each | 128.0 | 128.0 | 2.0 | False | None | None | False | None | False | 256.0 | 0 | | 2343711 | 69330 | None | Electrical DSR It.no 3.14.2 | Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch | No | 70.0 | 70.0 | 20.0 | False | None | None | False | None | False | 1400.0 | 0 | | 2343712 | 69330 | None | Electrical DSR It.no 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module | Each | 137.0 | 137.0 | 20.0 | False | None | None | False | None | False | 2740.0 | 0 | | 2343713 | 69330 | None | Electrical DSR It.no 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module | Each | 175.0 | 175.0 | 20.0 | False | None | None | False | None | False | 3500.0 | 0 | | 2343714 | 69330 | None | Electrical DSR It.no 3.8 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. | Sq CM | 0.41 | 0.41 | 5000.0 | False | None | None | False | None | False | 2050.0 | 0 | | 2343715 | 69330 | None | Electrical DSR It.no 6.3.2 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. | Each | 3031.0 | 3031.0 | 4.0 | False | None | None | False | None | False | 12124.0 | 0 | | 2343716 | 69330 | None | Electrical DSR It.no 11.2.2 | Supplying & fixing retrofit type-PL- LED Lamp W LED linear source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per W, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PFgreater than0.95, power loss should lesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.18-20 w | Each | 702.0 | 702.0 | 8.0 | False | None | None | False | None | False | 5616.0 | 0 | | 2343717 | 69330 | None | Electrical DSR It.no 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps. | Each | 122.0 | 122.0 | 8.0 | False | None | None | False | None | False | 976.0 | 0 | | 2343718 | 69330 | None | Electrical DSR It.no 13.11 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated
twin twisted copper wire and wiring. | Each | 315.0 | 315.0 | 4.0 | False | None | None | False | None | False | 1260.0 | 0 | | 2343719 | 69330 | None | Electrical DSR It.no 12.57 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe tocomplete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts,washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | No | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 | | 2343720 | 69330 | None | WS & UGD DSR 2021-22 It.no44 P420A | Providing, Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work.3.5x6sqm | Mtr | 515.0 | 515.0 | 10.0 | False | None | None | False | None | False | 5150.0 | 0 | | 2343721 | 69330 | None | WS & UGD DSR 2021-22 It.no41 P390A | Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work.3.5x6 sqmm | m | 150.0 | 150.0 | 10.0 | False | None | None | False | None | False | 1500.0 | 0 | | 2343722 | 69330 | None | Electrical DSR It.no 5.18.8 | Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. | Each | 3044.0 | 3044.0 | 1.0 | False | None | None | False | None | False | 3044.0 | 0 | | 2343723 | 69330 | None | Vol-5 I No. 13.38.1 Page No. 156 | Providing and fixing suitable for 1.1 KV class UG cable filled with
necessary bitumen/insulating compound complete with terminals,
clamps,bolts,nuts and washers etc. with necessary materials and labour
tools and equipments as per instructions of engineer incharge of work. 3.5x6 Sqm | m | 375.0 | 375.0 | 30.0 | False | None | None | False | None | False | 11250.0 | 0 | | 2343724 | 69330 | None | Vol-5 I No. 13.35.2 Page No. 156 | Labour charges for providing connection using insulated sheathed
steel wire cable as per IS 1554/ 1988 with latest amendments from
KPTCL pole to meter board unit, with all necessary materials ,tools and
equipments,as per specificationswith testing of as per instructions of
engineer incharge of work 3.50x 6 sqmm | m | 160.0 | 160.0 | 30.0 | False | None | None | False | None | False | 4800.0 | 0 | | 2343725 | 69330 | None | 5.18.8 | Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
capacity of 10K and complete wiring as required confirming to IEC
60898.40 A TPN | Each | 3044.0 | 3044.0 | 2.0 | False | None | None | False | None | False | 6088.0 | 0 |
|
|
|---|