createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1706696191630 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 5500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-02-2024 16:00:00 tenderQueryClose 12-02-2024 11:00:00 technicalBidOpen None publishedDate 31-01-2024 17:28:59 publishedByPost RDPR_EE_DIV_SRS publishedByUser KPE13012 - SATISH HAYAGRIVACHARYA JAHAGIRDAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EXECUTIVE ENGINEER splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08384226381 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1706696191670 version 5 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT3910 title Construction of Toilet Room in Urdu HighSchool at Sirsi Taluk (SC Category) description Construction of Toilet Room in Urdu HighSchool at Sirsi Taluk (SC Category) category WORKS categoryText Works ecv 436829.39 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 976 locationName RDPR Division Office Sirsi provisionalAmount 520000.0 groupOverheadTotal None fileNumber EducationDept09
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1706696192000 0 None None Buildings Construction of Toilet Room in Urdu HighSchool at Sirsi Taluk 436829.39 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2353552 69610 None code01 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. ---- WORK COMPLETE WITHIN 45 DAYS Cum 542.08 542.08 1.8 False None None False None False 975.744 0 2353553 69610 None code02 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ---- WORK COMPLETE WITHIN 45 DAYS Cum 179.2 179.2 1.8 False None None False None False 322.56 0 2353554 69610 None code03 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth ---- WORK COMPLETE WITHIN 45 DAYS Cum 334.88 334.88 5.376 False None None False None False 1800.31488 0 2353555 69610 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 45 DAYS Cum 6343.68 6343.68 0.672 False None None False None False 4262.95296 0 2353556 69610 None code05 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S. 3620/1979 having compressive strength not less then 3.5 N/mm2 for saturated dry samples. For Foundation in CM 1:6 (Cement 45kgs/M3) ---- WORK COMPLETE WITHIN 45 DAYS Cum 7138.88 7138.88 4.032 False None None False None False 28783.96416 0 2353557 69610 None code06 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 45 DAYS Cum 6963.04 6963.04 3.387 False None None False None False 23583.81648 0 2353558 69610 None code07 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- WORK COMPLETE WITHIN 45 DAYS Cum 297.92 297.92 5.0 False None None False None False 1489.6 0 2353559 69610 None code08 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- WORK COMPLETE WITHIN 45 DAYS Sqm 1378.72 1378.72 38.84 False None None False None False 53549.4848 0 2353560 69610 None code09 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- WORK COMPLETE WITHIN 45 DAYS Mtr 460.32 460.32 10.0 False None None False None False 4603.2 0 2353561 69610 None code10 DO---PVC pipes 32mm dia., 10 kg/sqcm & class 5 ---- WORK COMPLETE WITHIN 45 DAYS Mtr 75.04 75.04 40.0 False None None False None False 3001.6 0 2353562 69610 None code11 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- WORK COMPLETE WITHIN 45 DAYS Sqm 4751.04 4751.04 3.6 False None None False None False 17103.744 0 2353563 69610 None code12 Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 and reinforced with 1.70 kg of TMT steel reinforced with 3 No. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 cm c/c in triangle shape per meter length of door frames, including cost of steel and fabrication charges having 4 No. of 304 Grade Stainless Steel hinges plate attachment made of 165 mm x 25 mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws made out of 304 grade stainless steel screws and MS square nuts of size 8 x 8 square and length 10 mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 32 mm, 21 days tank immersed curing including cost of labour, materials, usage charge of machinery complete excluding the cost of door fixtures as per the direction of Engineer ---- WORK COMPLETE WITHIN 45 DAYS Mtr 963.2 963.2 21.6 False None None False None False 20805.12 0 2353564 69610 None code13 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximumtoxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thick ---- WORK COMPLETE WITHIN 45 DAYS Sqm 3903.2 3903.2 5.13 False None None False None False 20023.416 0 2353565 69610 None code14 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- WORK COMPLETE WITHIN 45 DAYS Kg 188.16 188.16 96.96 False None None False None False 18243.9936 0 2353566 69610 None code15 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusiv ---- WORK COMPLETE WITHIN 45 DAYS Sqm 6405.28 6405.28 2.16 False None None False None False 13835.4048 0 2353567 69610 None code16 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- WORK COMPLETE WITHIN 45 DAYS Sqm 269.92 269.92 89.84 False None None False None False 24249.6128 0 2353568 69610 None code17 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Size of Tile 600x600 mm ---- WORK COMPLETE WITHIN 45 DAYS Sqm 1205.12 1205.12 18.56 False None None False None False 22367.0272 0 2353569 69610 None code18 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. ---- WORK COMPLETE WITHIN 45 DAYS Sqm 1238.72 1238.72 16.56 False None None False None False 20513.2032 0 2353570 69610 None code19 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes m 296.00 ---- WORK COMPLETE WITHIN 45 DAYS Mtr 331.52 331.52 28.0 False None None False None False 9282.56 0 2353571 69610 None code20 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge.. ---- WORK COMPLETE WITHIN 45 DAYS Sqm 59.36 59.36 89.84 False None None False None False 5332.9024 0 2353572 69610 None code21 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- WORK COMPLETE WITHIN 45 DAYS Sqm 194.88 194.88 70.4 False None None False None False 13719.552 0 2353573 69610 None code22 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. ---- WORK COMPLETE WITHIN 45 DAYS Sqm 123.2 123.2 84.08 False None None False None False 10358.656 0 2353574 69610 None code23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- WORK COMPLETE WITHIN 45 DAYS Each 4988.48 4988.48 4.0 False None None False None False 19953.92 0 2353575 69610 None code24 Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm ---- WORK COMPLETE WITHIN 45 DAYS Each 1599.36 1599.36 4.0 False None None False None False 6397.44 0 2353576 69610 None code25 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap ---- WORK COMPLETE WITHIN 45 DAYS Each 2868.32 2868.32 2.0 False None None False None False 5736.64 0 2353577 69610 None code26 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- WORK COMPLETE WITHIN 45 DAYS Sqm 3123.68 3123.68 1.8 False None None False None False 5622.624 0 2353578 69610 None code27 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ v0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ---- WORK COMPLETE WITHIN 45 DAYS Sqm 636.16 636.16 35.0 False None None False None False 22265.6 0 2353579 69610 None code28 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steelprimer, including welding and bolted with special shaped washers etc.complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications andas per directions of the Engineer-in-Charge ---- WORK COMPLETE WITHIN 45 DAYS Kgs 164.64 164.64 356.2 False None None False None False 58644.768 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1706696194000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1706696194000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1706696194000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1706696194000 0 None None ELIGIBILITY Department Registration Details None 1706696194000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1706696194000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1706696194000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1706696194000 0 None None ELIGIBILITY Banker Details None 1706696229000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end. None 1706696238000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1706696247000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1706696256000 0 None None ELIGIBILITY The bid is to be submitted through GOK kppp platform www.kppp.karnataka.gov.in only. None 1706696263000 0 None None ELIGIBILITY Tenderers who have not registered in the GOK kppp portal should be registered through web site www.kppp.karnataka.gov.in . None 1706696272000 0 None None ELIGIBILITY The Tenderer should obtain tender documents through kppp web site www.kppp.karnataka.gov.in at free of cost. Additional conditions and informations also can be obtained through the above mentioned website. None 1706696281000 0 None None ELIGIBILITY Any damage during the progress of work, the damage cost should be beared by the contractor. None 1706696290000 0 None None ELIGIBILITY Tender application cost will not be refundable or exchangeable in case of cancellation of tender. None 1706696298000 0 None None ELIGIBILITY All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost. None 1706696308000 0 None None ELIGIBILITY Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost. None 1706696315000 0 None None ELIGIBILITY Corrigendums / modifications / correction, if any, will be published in the website only. None 1706696323000 0 None None ELIGIBILITY More details should be collected from the office at working hours None 1706696330000 0 None None ELIGIBILITY The Executive Engineer, PRE SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered in KPWD with kppp portal for the construction of works None 1706696338000 0 None None ELIGIBILITY If the rates quoted by the Contractor is lesser than the amount put to tender, the difference cost (Additional Security Deposit) should be paid by the contractor, through FDR in the favour of Executive Engineer at the time of Agreement. None 1706696345000 0 None None ELIGIBILITY GST Shall be paid to the tendered amount separately None 1706696354000 0 None None ELIGIBILITY Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. None 1706696362000 0 None None ELIGIBILITY The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work. None 1706696370000 0 None None ELIGIBILITY The Executive Engineer rights accept and reject the tender without intimation or information None 1706696379000 0 None None ELIGIBILITY The contractor should scan the PWD Registration None 1706696387000 0 None None ELIGIBILITY The contractor should scan the PAN card and GST No None 1706696394000 0 None None ELIGIBILITY Contractors Postal address and Mobile No None 1706696402000 0 None None ELIGIBILITY Tendering should strictly adhere to Govt. order gazette notification FINANCE SECRETARIAT NOTIFICATION No:FD/876 Exp-12/2017 BENGALURU DATED:15-09-2017 None 1706696410000 0 None None ELIGIBILITY Only contractor belongs to scheduled Caste SC category and resident of Karnataka State for more than 10 years should participate in tender along with caste Certificate and Domicile Certificate issued by competent authority with RD No. as per the CEO ZP Karwar Order No. E-36126 / 2022-23, Dated 29-08-2022 which should be uploaded. None 1706696418000 0 None None ELIGIBILITY EMD shall be paid in the form of e-payment through kppp portal on or before as per the last date and time mentioned in the kppp portal. None 1706696427000 0 None None ELIGIBILITY Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder. None 1706696439000 0 None None ELIGIBILITY Contractor should obey with the above conditions in addition to the KW-1 None 1706696448000 0 None None ELIGIBILITY Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs: 4.37 lakhs None 1706696457000 0 None None ELIGIBILITY Turn over Certificate should be enclosed for the last previous 5 years from charted accountant in singal page and achieved in at least one financial year a minimum financial turnover is equal or above of Rs: 4.37 lakhs None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Reserved Category Certificate True Technical Bid The Executive Engineer, P.R.E.. SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered Eligible Contractor in KPWD and enrolled with kppp portal for the construction of works True Technical Bid KW-1 format 1.3 A & 1.3 B compulsary Submitted with details True Technical Bid The available tender capacity should be not less than Rs. 4.37 lakhs True Technical Bid Turnover Certificate From Charted Account For last Five years True Technical Bid The Contractor should scan the PAN Card and GST No. True Technical Bid Contractors Postal Address and Mobile No. True Technical Bid EMD shall be paid in the form of e-payment through kppp portal on or before as per the last date and time mentioned in the kppp portal. True Technical Bid Only contractor belongs to scheduled Caste SC category and resident of Karnataka State for more than 10 years should participate in tender along with caste Certificate and Domicile Certificate issued by competent authority with RD No. as per the CEO ZP Karwar Order No. E-36126 / 2022-23, Dated 29-08-2022 which should be uploaded. True Technical Bid Tendering should strictly adhere to Govt. order gazette notification FINANCE SECRETARIAT NOTIFICATION No.FD/876 Exp-12/2017 BENGALURU DATED. 15-09-2017 True Technical Bid Residential Certificate True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Uttara Kannada Sirsi Kanara SIRSI (SC) Urdu School Sirsi Town None None None None None None
tenderAddress	None
tenderRecallDTO	None