| 2212069 | 64640 | None | B01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Note: Cost of De-watering upto 5 % of (A+B) may be added, where required as sessment for dewatering shall be made as per site condition PWD SR-2023-24 - Vol. 1 - Page No. 8 - Item No. 1.14.1 | Cum | 105.06 | 105.06 | 26.04 | False | None | None | False | None | False | 2735.7624 | 0 |
| 2212070 | 64640 | None | B02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 15 - Item No. 2.1.3 | Cum | 6168.67 | 6168.67 | 5.92 | False | None | None | False | None | False | 36518.5264 | 0 |
| 2212071 | 64640 | None | B03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)PWD SR-2023-24 - Vol. 2- Page No. 9 - Item No. 5.4 | Cum | 6580.67 | 6580.67 | 12.9 | False | None | None | False | None | False | 84890.643 | 0 |
| 2212072 | 64640 | None | B04 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.4.2 | Cum | 7033.71 | 7033.71 | 1.8 | False | None | None | False | None | False | 12660.678 | 0 |
| 2212073 | 64640 | None | B05 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.4.2 | Cum | 11071.57 | 11071.57 | 0.28 | False | None | None | False | None | False | 3100.0396 | 0 |
| 2212074 | 64640 | None | B06 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.4.2 | Cum | 9769.04 | 9769.04 | 1.85 | False | None | None | False | None | False | 18072.724 | 0 |
| 2212075 | 64640 | None | B07 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.5.1 | Cum | 11609.13 | 11609.13 | 1.28 | False | None | None | False | None | False | 14859.6864 | 0 |
| 2212076 | 64640 | None | B08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.5.1 | Cum | 10926.24 | 10926.24 | 0.79 | False | None | None | False | None | False | 8631.7296 | 0 |
| 2212077 | 64640 | None | B09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD SR-2023-24 - Vol. 1 - Page No. 17 - Item No. 2.5.1 | Cum | 10926.24 | 10926.24 | 1.85 | False | None | None | False | None | False | 20213.544 | 0 |
| 2212078 | 64640 | None | B10 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR-2023-24 - Vol. 1 - Page No. 17 - Item No. 2.5.1 | Cum | 10243.35 | 10243.35 | 3.33 | False | None | None | False | None | False | 34110.3555 | 0 |
| 2212079 | 64640 | None | B11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour,cleaning,straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.PWD SR-2023-24 - Vol. 2 - Page No. 84 - Item No. 11.32 | Tonne | 92140.71 | 92140.71 | 0.99 | False | None | None | False | None | False | 91219.3029 | 0 |
| 2212080 | 64640 | None | B12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD SR-2023-24 - Vol. 1 - Page No. 7 - Item No. 1.9 | Cum | 273.98 | 273.98 | 2.08 | False | None | None | False | None | False | 569.8784 | 0 |
| 2212081 | 64640 | None | B13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work PWD SR-2023-24 - Vol. 2 - Page No. 14 - Item No.6.12 | Sqm | 1033.09 | 1033.09 | 90.41 | False | None | None | False | None | False | 93401.6669 | 0 |
| 2212082 | 64640 | None | B14 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD SR-2023-24 - Vol. 2 - Page No. 41 - Item No.8.1.1 | Sqm | 262.65 | 262.65 | 40.12 | False | None | None | False | None | False | 10537.518 | 0 |
| 2212083 | 64640 | None | B15 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD SR-2023-24 - Vol. 2 - Page No. 41 - Item No.8.2.2 | Sqm | 287.37 | 287.37 | 61.98 | False | None | None | False | None | False | 17811.1926 | 0 |
| 2212084 | 64640 | None | B16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.PWD SR-2023-24 - Vol. 2 - Page No. 60 - Item No.9.10 | Sqm | 1139.18 | 1139.18 | 25.03 | False | None | None | False | None | False | 28513.6754 | 0 |
| 2212085 | 64640 | None | B17 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete PWD SR-2023-24 - Vol. 2 - Page No. 71 - Item No.10.14 | Sqm | 1139.18 | 1139.18 | 138.18 | False | None | None | False | None | False | 157411.8924 | 0 |
| 2212086 | 64640 | None | B18 | Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR-2023-24 - Vol. 2 - Page No. 45 - Item No. 8.25 | Sqm | 141.11 | 141.11 | 40.12 | False | None | None | False | None | False | 5661.3332 | 0 |
| 2212087 | 64640 | None | B19 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats
applied @ 1.43 L/ 10 m². Over and including priming coat of exterior
primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR-2023-24 - Vol. 2 - Page No. 46 - Item No. 8.32 | Sqm | 160.68 | 160.68 | 61.98 | False | None | None | False | None | False | 9958.9464 | 0 |
| 2212088 | 64640 | None | B20 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge PWD SR-2023-24 - Vol. 2 - Page No. 104 - Item No.12.54 | Mtr | 327.54 | 327.54 | 54.0 | False | None | None | False | None | False | 17687.16 | 0 |
| 2212089 | 64640 | None | B21 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with one side prelam PWD SR-2023-24 - Vol. 2 - Page No. 104 - Item No.12.55.2 | Sqm | 2101.2 | 2101.2 | 17.01 | False | None | None | False | None | False | 35741.412 | 0 |
| 2212090 | 64640 | None | B22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD SR-2023-24 - Vol. 2 -Page 85- Item No.11.28 | Kgs | 581.95 | 581.95 | 100.0 | False | None | None | False | None | False | 58195.0 | 0 |
| 2212091 | 64640 | None | B23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6
mm angle iron and 3 mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a priming
coat of approved steel primer. Using flats 30x6mm for diagonal braces
and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD SR-2023-24 - Vol. 2 -Page 77- Item No.11.5.2 | Sqm | 4369.26 | 4369.26 | 2.52 | False | None | None | False | None | False | 11010.5352 | 0 |
| 2212092 | 64640 | None | B24 | Providing & fixing of louvered ventilator made out of multi chambered
UPVCMatching to RAL9016sections and with minimum TiO2Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm 1000mmThe cost is inclusive of all fixtures and separate charges for minor TP s shall not be made PWD SR-2023-24 - Vol. 2 - Page No. 109 - Item No.12.85 | Sqm | 5890.57 | 5890.57 | 2.43 | False | None | None | False | None | False | 14314.0851 | 0 |
| 2212093 | 64640 | None | B25 | Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting
out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting
& stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces
required to complete the work. In all kinds of soils Depth upto 3 m Note: Cost of De-watering upto 5 % of (A+B) may be added, where required as sessment for dewatering shall be made as per site conditionPWD SR-2023-24 - Vol. 1 - Page No. 8 - Item No. 1.14.1 | Cum | 105.06 | 105.06 | 7.93 | False | None | None | False | None | False | 833.1258 | 0 |
| 2212094 | 64640 | None | B26 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregatesPWD SR-2021-22 - Vol. 1 - Page No. 63 - Item No. 2.1.4 | Cum | 6168.67 | 6168.67 | 0.44 | False | None | None | False | None | False | 2714.2148 | 0 |
| 2212095 | 64640 | None | B27 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD SR-2021-22 - Vol. 2 - Page No. 13 - Item No. 6.3 | Cum | 9140.22 | 9140.22 | 3.07 | False | None | None | False | None | False | 28060.4754 | 0 |
| 2212096 | 64640 | None | B28 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD SR-2021-22 - Vol. 1 - Page No. 16 - Item No. 2.3.1 | Cum | 6638.8 | 6638.8 | 0.26 | False | None | None | False | None | False | 1726.088 | 0 |
| 2212097 | 64640 | None | B30 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour,cleaning,straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.PWD SR-2023-24 - Vol. 2 - Page No. 84 - Item No. 11.32 | Cum | 10243.35 | 10243.35 | 0.39 | False | None | None | False | None | False | 3994.9065 | 0 |
| 2212098 | 64640 | None | B32 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD SR-2023-24 - Vol. 2 - Page No. 41 - Item No.8.1.1 | Sqm | 282.22 | 282.22 | 10.46 | False | None | None | False | None | False | 2952.0212 | 0 |
| 2212099 | 64640 | None | B33 | Providing and laying water proofing treatment to the Water tanks & Liq uid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification. | Sqm | 522.21 | 522.21 | 16.19 | False | None | None | False | None | False | 8454.5799 | 0 |
| 2212100 | 64640 | None | B34 | Extra for providing and mixing water proofing material in cement plaster
work in proportion recommended by the manufacturers including cost of
material etc as per specifications and as per directions of the Engineer in-Charge.PWD SR-2021-22 - Vol. 2 - Page No. 43- Item No. 8.12 | Kg | 65.92 | 65.92 | 4.0 | False | None | None | False | None | False | 263.68 | 0 |
| 2212101 | 64640 | None | B35 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete. for:PVC pipes 90mm dia., 6 kg/sqcm & class 3PWD SR-2021-22 - Vol. 5 - Page No. 113- Item No.10.1.6 | m | 302.82 | 302.82 | 2.4 | False | None | None | False | None | False | 726.768 | 0 |
| 2212102 | 64640 | None | B36 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD SR-2023-24 - Vol. 1 - Page No. 7 - Item No. 1.9 | Cum | 273.98 | 273.98 | 3.53 | False | None | None | False | None | False | 967.1494 | 0 |
| 2212103 | 64640 | None | B37 | Rectangular cover 600X850 mm with frame (low duty)PWD SR-2023-24 - Vol. 2 - Page No. A-33 - Item No. 709 | No | 1802.5 | 1802.5 | 1.0 | False | None | None | False | None | False | 1802.5 | 0 |
| 2212104 | 64640 | None | B38 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thickS.R. Electrical Works for 2023-24 Chapter - 1, Item No.1.1.1 Page No 2 | Mtr | 69.0 | 69.0 | 30.0 | False | None | None | False | None | False | 2070.0 | 0 |
| 2212105 | 64640 | None | B39 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thickS.R. Electrical Works for 2023-24 Chapter - 1. Item No.1.2.2 Page No 2 | Mtr | 78.0 | 78.0 | 30.0 | False | None | None | False | None | False | 2340.0 | 0 |
| 2212106 | 64640 | None | B40 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick S.R. Electrical Works for 2023-24 Chapter - 1, Item No.1.3.1 Page No 2 | Mtr | 68.0 | 68.0 | 30.0 | False | None | None | False | None | False | 2040.0 | 0 |
| 2212107 | 64640 | None | B41 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thickS.R. Electrical Works for 2023-24 Chapter - 1, Item No.1.3.2 Page No 2 | Mtr | 79.0 | 79.0 | 30.0 | False | None | None | False | None | False | 2370.0 | 0 |
| 2212108 | 64640 | None | B42 | Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.32 mm dia 2.5 mm thickS.R. Electrical Works for 2023-24 Chapter - 1, Item No.1.1.3 Page No 2 | Mtr | 100.0 | 100.0 | 30.0 | False | None | None | False | None | False | 3000.0 | 0 |
| 2212109 | 64640 | None | B43 | Supplying and fixing surfaceflush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 3 WayS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.3.2 | Each | 124.0 | 124.0 | 2.0 | False | None | None | False | None | False | 248.0 | 0 |
| 2212110 | 64640 | None | B44 | Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 WayS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.3.3 | Each | 137.0 | 137.0 | 2.0 | False | None | None | False | None | False | 274.0 | 0 |
| 2212111 | 64640 | None | B45 | Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 WayS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.3.5 | Each | 219.0 | 219.0 | 2.0 | False | None | None | False | None | False | 438.0 | 0 |
| 2212112 | 64640 | None | B46 | Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 ModuleS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.5.2 | Each | 161.0 | 161.0 | 2.0 | False | None | None | False | None | False | 322.0 | 0 |
| 2212113 | 64640 | None | B47 | Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 ModuleS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.5.3 | Each | 175.0 | 175.0 | 2.0 | False | None | None | False | None | False | 350.0 | 0 |
| 2212114 | 64640 | None | B48 | Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 ModuleS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.5.5 | Each | 284.0 | 284.0 | 2.0 | False | None | None | False | None | False | 568.0 | 0 |
| 2212115 | 64640 | None | B49 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way SwitchS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.6.1 | Each | 102.0 | 102.0 | 6.0 | False | None | None | False | None | False | 612.0 | 0 |
| 2212116 | 64640 | None | B50 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way SwitchS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.6.2 | Each | 166.0 | 166.0 | 2.0 | False | None | None | False | None | False | 332.0 | 0 |
| 2212117 | 64640 | None | B51 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socketS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.6.3 | Each | 171.0 | 171.0 | 2.0 | False | None | None | False | None | False | 342.0 | 0 |
| 2212118 | 64640 | None | B52 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP SwitchS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.6.9 | Each | 326.0 | 326.0 | 2.0 | False | None | None | False | None | False | 652.0 | 0 |
| 2212119 | 64640 | None | B53 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal SocketS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.6.10 | Each | 180.0 | 180.0 | 2.0 | False | None | None | False | None | False | 360.0 | 0 |
| 2212120 | 64640 | None | B54 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switchS.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.1.1 | Point | 285.0 | 285.0 | 2.0 | False | None | None | False | None | False | 570.0 | 0 |
| 2212121 | 64640 | None | B55 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switchS.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.1.2 | Point | 394.0 | 394.0 | 2.0 | False | None | None | False | None | False | 788.0 | 0 |
| 2212122 | 64640 | None | B56 | Point Wiring using Copper wire with switch.
Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to outlet via switch.S.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.1.3 | Nos | 570.0 | 570.0 | 2.0 | False | None | None | False | None | False | 1140.0 | 0 |
| 2212123 | 64640 | None | B57 | Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 6 Amps 3/5 wayS.R. Electrical Works for 2023-24 Chapter - 3, Item No.3.1.2 | Each | 147.0 | 147.0 | 4.0 | False | None | None | False | None | False | 588.0 | 0 |
| 2212124 | 64640 | None | B58 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 1 mm2S.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.3.1 | m | 19.0 | 19.0 | 15.0 | False | None | None | False | None | False | 285.0 | 0 |
| 2212125 | 64640 | None | B59 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 1.5 mm2S.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.3.2 | m | 26.0 | 26.0 | 15.0 | False | None | None | False | None | False | 390.0 | 0 |
| 2212126 | 64640 | None | B60 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 2.5 mm2S.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.3.3 | m | 42.0 | 42.0 | 15.0 | False | None | None | False | None | False | 630.0 | 0 |
| 2212127 | 64640 | None | B61 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP 4 mm2S.R. Electrical Works for 2023-24 Chapter - 2, Item No.2.3.4 | m | 63.0 | 63.0 | 15.0 | False | None | None | False | None | False | 945.0 | 0 |
| 2212128 | 64640 | None | B62 | Supplying of .4'.feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.S.R. Electrical Works for 2023-24 Chapter - 11, Item No.11.3.2 | Each | 690.0 | 690.0 | 2.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 2212129 | 64640 | None | B63 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.S.R. Electrical Works for 2023-24 Chapter - 13, Item No.13.7.1 | Each | 122.0 | 122.0 | 2.0 | False | None | None | False | None | False | 244.0 | 0 |
| 2212130 | 64640 | None | B64 | Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 AmpsS.R. Electrical Works for 2023-24 Chapter - 5, Item No.5.7.3 | Each | 401.0 | 401.0 | 2.0 | False | None | None | False | None | False | 802.0 | 0 |
| 2212131 | 64640 | None | B65 | Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 - 32 Amps DPS.R. Electrical Works for 2023-24 Chapter - 5, Item No.5.18.4 | Each | 739.0 | 739.0 | 2.0 | False | None | None | False | None | False | 1478.0 | 0 |
| 2212132 | 64640 | None | B66 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.S.R. Electrical Works for 2023-24 Chapter - 5, Item No.5.19.5 | Each | 2932.0 | 2932.0 | 1.0 | False | None | None | False | None | False | 2932.0 | 0 |
| 2212133 | 64640 | None | B67 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16-25A 4 poleS.R. Electrical Works for 2023-24 Chapter - 5, Item No.5.20.6 | Each | 5066.0 | 5066.0 | 2.0 | False | None | None | False | None | False | 10132.0 | 0 |
| 2212134 | 64640 | None | B68 | Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.
S.R. Electrical Works for 2023-24 Chapter - 5, Item No.5.42.2 | cm | 0.43 | 0.43 | 2500.0 | False | None | None | False | None | False | 1075.0 | 0 |
| 2212135 | 64640 | None | B69 | Supplying fixing of retrofit type LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322IEC 60598, LM 79 LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5of lamp Wage., short circuit open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABLCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical conditioNS.R. Electrical Works for 2023-24 Chapter - 11, Item No.11.11.4 | Each | 154.0 | 154.0 | 2.0 | False | None | None | False | None | False | 308.0 | 0 |
| 2212136 | 64640 | None | B70 | Supplying fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABLCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.S.R. Electrical Works for 2023-24 Chapter - 11, Item No.11.11.5 | Each | 269.0 | 269.0 | 4.0 | False | None | None | False | None | False | 1076.0 | 0 |
| 2212137 | 64640 | None | B71 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975BESCOM. Electrical Works for 2021-22, Item No. 32.04 | Km | 114683.0 | 114683.0 | 0.03 | False | None | None | False | None | False | 3440.49 | 0 |
| 2212138 | 64640 | None | B72 | Grounding Material Pipe Grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 KgBESCOM Electrical Works for 2021-22, Item No. 54.01 | No | 770.0 | 770.0 | 1.0 | False | None | None | False | None | False | 770.0 | 0 |
| 2212139 | 64640 | None | B73 | Grounding Material Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg eachBESCOM Electrical Works for 2021-22, Item No. 54.02 | No | 660.0 | 660.0 | 1.0 | False | None | None | False | None | False | 660.0 | 0 |
| 2212140 | 64640 | None | B74 | Grounding Material Good Quality Salt for grounding purposes packed in 50
Kg gunny bagBESCOM Electrical Works for 2021-22, Item No. 54.03 | Bag | 303.0 | 303.0 | 1.0 | False | None | None | False | None | False | 303.0 | 0 |
| 2212141 | 64640 | None | B75 | LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations)BESCOM Electrical Works for 2021-22, Item No. 56.05 | No | 934.0 | 934.0 | 1.0 | False | None | None | False | None | False | 934.0 | 0 |
| 2212142 | 64640 | None | B76 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete. for:PVC pipes 25mm dia, 10 kg/sqcm & class 5PWD SR-2023-24 - Vol. 5 - Page No. 113- Item No.10.1.1 | m | 49.44 | 49.44 | 50.0 | False | None | None | False | None | False | 2472.0 | 0 |
| 2212143 | 64640 | None | B77 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete. for:PVC pipes 25mm dia, 10 kg/sqcm & class 5PWD SR-2023-24 - Vol. 5 - Page No. 113- Item No.10.1.2 | m | 69.01 | 69.01 | 50.0 | False | None | None | False | None | False | 3450.5 | 0 |
| 2212144 | 64640 | None | B78 | Making connection of G.I. distribution branch with G.I. main of following
sizes by providing and fixing tee, including cutting and threading the pipe
etc. completePWD SR-2023-24 - Vol. 2 - Page No. 117 - Item No. 13.1.1 | Nos | 626.24 | 626.24 | 11.0 | False | None | None | False | None | False | 6888.64 | 0 |
| 2212145 | 64640 | None | B79 | Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gPWD SR-2023-24 - Vol. 2 - Page No. 120 - Item No. 13.18.1 | Nos | 134.93 | 134.93 | 9.0 | False | None | None | False | None | False | 1214.37 | 0 |
| 2212146 | 64640 | None | B80 | Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 86 mm long,PWD SR-2023-24 - Vol. 2 - Page No. 120 - Item No. 13.18.2 | Nos | 148.32 | 148.32 | 2.0 | False | None | None | False | None | False | 296.64 | 0 |
| 2212147 | 64640 | None | B81 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) :25 mm nominal borePWD SR-2023-24 - Vol. 2 - Page No. 117 - Item No. 13.4.1 | Nos | 565.47 | 565.47 | 2.0 | False | None | None | False | None | False | 1130.94 | 0 |
| 2212148 | 64640 | None | B82 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) :32 mm nominal borePWD SR-2023-24 - Vol. 2 - Page No. 117 - Item No. 13.4.2 | Nos | 615.94 | 615.94 | 2.0 | False | None | None | False | None | False | 1231.88 | 0 |
| 2212149 | 64640 | None | B83 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gPWD SR-2023-24 - Vol. 2 - Page No. 118 - Item No. 13.17.1 | Nos | 162.47 | 162.47 | 2.0 | False | None | None | False | None | False | 324.94 | 0 |
| 2212150 | 64640 | None | B84 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal borePWD SR-2023-24 - Vol. 2 - Page No. 115 - Item No. 13.5.3 | Nos | 341.96 | 341.96 | 2.0 | False | None | None | False | None | False | 683.92 | 0 |
| 2212151 | 64640 | None | B85 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal borePWD SR-2023-24 - Vol. 2 - Page No. 119 - Item No. 13.11.2 | Nos | 581.95 | 581.95 | 4.0 | False | None | None | False | None | False | 2327.8 | 0 |
| 2212152 | 64640 | None | B86 | Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 25 mm nominal bore HorizontalPWD SR-2023-24 - Vol. 2 - Page No. 117 - Item No. 13.6.1.1 | Nos | 638.6 | 638.6 | 2.0 | False | None | None | False | None | False | 1277.2 | 0 |
| 2212153 | 64640 | None | B87 | Providing and fixing rectangular high density polyethylene water storage
loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.PWD SR-2023-24 - Vol. 2 - Page No. 123 - Item No. 13.34A | l | 9.27 | 9.27 | 1000.0 | False | None | None | False | None | False | 9270.0 | 0 |
| 2212154 | 64640 | None | B88 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the walls wherever
required: using White Vitreous China Wash basin size 550x400 mm with
a 15 mm CP Brass single hole basin mixerPWD SR-2023-24 - Vol. 2 - Page No. 133 - Item No. 14.7A | Each | 4244.63 | 4244.63 | 2.0 | False | None | None | False | None | False | 8489.26 | 0 |
| 2212155 | 64640 | None | B87 | Constructing brick masonry chamber of internal dimension 600x450mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering
12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixingCI cover & frame etc. excluding the cost of CI frame and coverPWD SR-2023-24 - Vol. 5 - Page No. 191 - Item No. 116.8 | Each | 4934.73 | 4934.73 | 4.0 | False | None | None | False | None | False | 19738.92 | 0 |
| 2212156 | 64640 | None | B88 | Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls andfloors wherever required :W.C. pan with ISI marked white solid plastic seat and lid PWD SR-2023-24 - Vol. 2 - Page No. 123 - Item No. 14.3.1 | Each | 5126.31 | 5126.31 | 7.0 | False | None | None | False | None | False | 35884.17 | 0 |
| 2212157 | 64640 | None | B89 | Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsPWD SR-2023-24 - Vol. 2 - Page No. 123 - Item No. 14.1.1 | Each | 5030.52 | 5030.52 | 2.0 | False | None | None | False | None | False | 10061.04 | 0 |
| 2212158 | 64640 | None | B90 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal borePWD SR-2023-24 - Vol. 2 - Page No. 119 - Item No. 13.10.5 | Nos | 524.27 | 524.27 | 8.0 | False | None | None | False | None | False | 4194.16 | 0 |
| 2212159 | 64640 | None | B91 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete. for:PVC pipes 90mm dia., 6 kg/sqcm & class 3PWD SR-2023-24 - Vol. 5 - Page No. 113- Item No.10.1.6 | m | 302.8 | 302.8 | 50.0 | False | None | None | False | None | False | 15140.0 | 0 |
| 2212160 | 64640 | None | B92 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3PWD SR-2023-24 - Vol. 5 - Page No. 113- Item No.10.1.7 | m | 423.33 | 423.33 | 50.0 | False | None | None | False | None | False | 21166.5 | 0 |
| 2212161 | 64640 | None | B93 | Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.
2 HP, Size 65x5PWD SR-2023-24 - Vol. 5 - Page No.157 - Item No. 13.40.1 | Each | 16078.3 | 16078.3 | 1.0 | False | None | None | False | None | False | 16078.3 | 0 |
| 2212162 | 64640 | None | B94 | Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting
out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting
& stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces
required to complete the work. In all kinds of soils Depth upto 3 m Note: Cost of De-watering upto 5 % of (A+B) may be added, where required as sessment for dewatering shall be made as per site conditionPWD SR-2023-24 - Vol. 1 - Page No. 8 - Item No. 1.14.1 | Cum | 105.26 | 105.26 | 11.25 | False | None | None | False | None | False | 1184.175 | 0 |
| 2212163 | 64640 | None | B95 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregatesPWD SR-2023-24 - Vol. 1 - Page No. 63 - Item No. 2.1.4 | Cum | 6168.67 | 6168.67 | 0.62 | False | None | None | False | None | False | 3824.5754 | 0 |
| 2212164 | 64640 | None | B96 | Providing Brick work with common burnt clay modular bricks of class
designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement
: 4 coarse sand) including cost of all materials, labour, scaffolding and
usage charges of machinery & other incidental charges complete as per
the direction of engineer incharge of work.PWD SR-2023-24 - Vol. 2 - Page No. 13 - Item No. 6.3 | Cum | 9140.22 | 9140.22 | 3.54 | False | None | None | False | None | False | 32356.3788 | 0 |
| 2212165 | 64640 | None | B97 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.3.1 | Cum | 6638.8 | 6638.8 | 0.31 | False | None | None | False | None | False | 2058.028 | 0 |
| 2212166 | 64640 | None | B98 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD SR-2023-24 - Vol. 1 - Page No. 16 - Item No. 2.5.1 | Cum | 10243.35 | 10243.35 | 0.57 | False | None | None | False | None | False | 5838.7095 | 0 |
| 2212167 | 64640 | None | B99 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour,cleaning,straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.PWD SR-2023-24 - Vol. 2 - Page No. 84 - Item No. 11.32 | Cum | 92140.71 | 92140.71 | 0.05 | False | None | None | False | None | False | 4607.0355 | 0 |
| 2212168 | 64640 | None | B100 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD SR-2023-24 - Vol. 2 - Page No. 41 - Item No.8.1.1 | Sqm | 282.22 | 282.22 | 11.42 | False | None | None | False | None | False | 3222.9524 | 0 |
| 2212169 | 64640 | None | B101 | Providing and laying water proofing treatment to the Water tanks & Liq uid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification.PWD SR-2023-24 - Vol. 2 - Page No. 150 - Item No. 15.6 | Sqm | 522.21 | 522.21 | 18.02 | False | None | None | False | None | False | 9410.2242 | 0 |
| 2212170 | 64640 | None | B102 | Extra for providing and mixing water proofing material in cement plaster
work in proportion recommended by the manufacturers including cost of
material etc as per specifications and as per directions of the Engineer in-Charge.PWD SR-2023-24 - Vol. 2 - Page No. 43- Item No. 8.12 | Kg | 65.92 | 65.92 | 4.0 | False | None | None | False | None | False | 263.68 | 0 |
| 2212171 | 64640 | None | B103 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete. for:PVC pipes 90mm dia., 6 kg/sqcm & class 3PWD SR-2023-24 - Vol. 5 - Page No. 113- Item No.10.1.6 | m | 302.82 | 302.82 | 2.4 | False | None | None | False | None | False | 726.768 | 0 |
| 2212172 | 64640 | None | B104 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD SR-2023-24 - Vol. 1 - Page No. 7 - Item No. 1.9 | Cum | 273.98 | 273.98 | 3.33 | False | None | None | False | None | False | 912.3534 | 0 |
| 2212173 | 64640 | None | B105 | Rectangular cover 600X850 mm with frame (low duty)PWD SR-2023-24 - Vol. 2 - Page No. A-33 - Item No. 709 | No | 1802.5 | 1802.5 | 1.0 | False | None | None | False | None | False | 1802.5 | 0 |