| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1706791961000 | 0 | None | None | Buildings | SAMBRANI- GROUND FLOOR | 63736752.56 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2383954 | 70910 | None | ITEM CODE-2.5.A | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer. In area of light jungle. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 4.12 | 4.12 | 20287.8 | False | None | None | False | None | False | 83585.736 | 0 | | 2383955 | 70910 | None | ITEM CODE-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 99.75 | 99.75 | 1170.0 | False | None | None | False | None | False | 116707.5 | 0 | | 2383956 | 70910 | None | ITEM CODE-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface ofconsolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per
specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 123.9 | 123.9 | 2835.04 | False | None | None | False | None | False | 351261.456 | 0 | | 2383957 | 70910 | None | ITEM CODE-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 2365.0 | False | None | None | False | None | False | 253291.5 | 0 | | 2383958 | 70910 | None | ITEM CODE-1.15.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 381.15 | 381.15 | 125.0 | False | None | None | False | None | False | 47643.75 | 0 | | 2383959 | 70910 | None | ITEM CODE-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6511.05 | 6511.05 | 521.0 | False | None | None | False | None | False | 3392257.05 | 0 | | 2383960 | 70910 | None | ITEM CODE-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 279.3 | 279.3 | 1130.0 | False | None | None | False | None | False | 315609.0 | 0 | | 2383961 | 70910 | None | ITEM CODE-1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Deduct 5% per m if rollers are not used and tamping is done manually. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 497.7 | 497.7 | 1967.0 | False | None | None | False | None | False | 978975.9 | 0 | | 2383962 | 70910 | None | ITEM CODE-2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Footings) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7185.02 | 7185.02 | 697.4 | False | None | None | False | None | False | 5010832.948 | 0 | | 2383963 | 70910 | None | ITEM CODE-2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (COLUMN) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11309.76 | 11309.76 | 106.0 | False | None | None | False | None | False | 1198834.56 | 0 | | 2383964 | 70910 | None | ITEM CODE-2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PLINGTH BEAM). (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10206.0 | 10206.0 | 290.0 | False | None | None | False | None | False | 2959740.0 | 0 | | 2383965 | 70910 | None | ITEM CODE-2.1.4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates. FLAGGING CONCRETE ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6527.85 | 6527.85 | 30.0 | False | None | None | False | None | False | 195835.5 | 0 | | 2383966 | 70910 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 178.8 | False | None | None | False | None | False | 16794657.18 | 0 | | 2383967 | 70910 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. COLULMNS (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12214.75 | 12214.75 | 95.22 | False | None | None | False | None | False | 1163088.495 | 0 | | 2383968 | 70910 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.LINTEL & ROOF BEAM (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11496.24 | 11496.24 | 49.17 | False | None | None | False | None | False | 565270.1208 | 0 | | 2383969 | 70910 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ROOF SLAB (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10777.72 | 10777.72 | 401.64 | False | None | None | False | None | False | 4328763.4608 | 0 | | 2383970 | 70910 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. STAIRCASE (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10777.72 | 10777.72 | 31.0 | False | None | None | False | None | False | 334109.32 | 0 | | 2383971 | 70910 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. CHEJJA (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10094.17 | 10094.17 | 13.64 | False | None | None | False | None | False | 137684.4788 | 0 | | 2383972 | 70910 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. WALL SHELVES (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10094.17 | 10094.17 | 5.07 | False | None | None | False | None | False | 51177.4419 | 0 | | 2383973 | 70910 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. LOFT (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10094.17 | 10094.17 | 6.0 | False | None | None | False | None | False | 60565.02 | 0 | | 2383974 | 70910 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (CILL CONCRETE) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6527.85 | 6527.85 | 6.0 | False | None | None | False | None | False | 39167.1 | 0 | | 2383975 | 70910 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 3500.0 | False | None | None | False | None | False | 4814250.0 | 0 | | 2383976 | 70910 | None | ITEM CODE-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1084.65 | 1084.65 | 280.37 | False | None | None | False | None | False | 304103.3205 | 0 | | 2383977 | 70910 | None | ITEM CODE-12.15 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 9800.7 | 9800.7 | 15.12 | False | None | None | False | None | False | 148186.584 | 0 | | 2383978 | 70910 | None | ITEM CODE-12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 103755.75 | 103755.75 | 5.0 | False | None | None | False | None | False | 518778.75 | 0 | | 2383979 | 70910 | None | ITEM CODE-12.57.2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3667.65 | 3667.65 | 127.36 | False | None | None | False | None | False | 467111.904 | 0 | | 2383980 | 70910 | None | ITEM CODE-12.93.1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately). Size 62 x 100mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 737.1 | 737.1 | 242.55 | False | None | None | False | None | False | 178783.605 | 0 | | 2383981 | 70910 | None | ITEM CODE-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately). 30 mm thickness ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3659.25 | 3659.25 | 80.32 | False | None | None | False | None | False | 293910.96 | 0 | | 2383982 | 70910 | None | ITEM CODE-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6004.95 | 6004.95 | 63.0 | False | None | None | False | None | False | 378311.85 | 0 | | 2383983 | 70910 | None | ITEM CODE-12.9 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7070.7 | 7070.7 | 132.0 | False | None | None | False | None | False | 933332.4 | 0 | | 2383984 | 70910 | None | ITEM CODE-12.86 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 5659.5 | 5659.5 | 119.0 | False | None | None | False | None | False | 673480.5 | 0 | | 2383985 | 70910 | None | ITEM CODE-11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 176.4 | 176.4 | 6638.0 | False | None | None | False | None | False | 1170943.2 | 0 | | 2383986 | 70910 | None | ITEM CODE-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Internal Plastering) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 309.75 | 309.75 | 5510.2 | False | None | None | False | None | False | 1706784.45 | 0 | | 2383987 | 70910 | None | ITEM CODE-8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 389.55 | 389.55 | 2859.51 | False | None | None | False | None | False | 1113922.1205 | 0 | | 2383988 | 70910 | None | ITEM CODE-8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 105.0 | 105.0 | 7309.16 | False | None | None | False | None | False | 767461.8 | 0 | | 2383989 | 70910 | None | ITEM CODE-8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 115.5 | 115.5 | 7309.16 | False | None | None | False | None | False | 844207.98 | 0 | | 2383990 | 70910 | None | ITEM CODE-8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 55.65 | 55.65 | 7309.16 | False | None | None | False | None | False | 406754.754 | 0 | | 2383991 | 70910 | None | ITEM CODE-8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 182.7 | 182.7 | 2860.0 | False | None | None | False | None | False | 522522.0 | 0 | | 2383992 | 70910 | None | ITEM CODE-8.41 | Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 175.35 | 175.35 | 517.2 | False | None | None | False | None | False | 90691.02 | 0 | | 2383993 | 70910 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 326.0 | False | None | None | False | None | False | 39364.5 | 0 | | 2383994 | 70910 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 317.0 | False | None | None | False | None | False | 38277.75 | 0 | | 2383995 | 70910 | None | ITEM CODE-9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 2994.6 | 2994.6 | 2350.01 | False | None | None | False | None | False | 7037339.946 | 0 | | 2383996 | 70910 | None | ITEM CODE-9.21.2 | Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1299.9 | 1299.9 | 417.63 | False | None | None | False | None | False | 542877.237 | 0 | | 2383997 | 70910 | None | ITEM CODE-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 933.45 | 933.45 | 197.13 | False | None | None | False | None | False | 184010.9985 | 0 | | 2383998 | 70910 | None | ITEM CODE-9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1521.45 | 1521.45 | 722.28 | False | None | None | False | None | False | 1098912.906 | 0 | | 2383999 | 70910 | None | ITEM CODE-8.16.2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 39.9 | 39.9 | 2596.0 | False | None | None | False | None | False | 103580.4 | 0 | | 2384000 | 70910 | None | ITEM CODE-11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 593.25 | 593.25 | 1230.0 | False | None | None | False | None | False | 729697.5 | 0 | | 2384001 | 70910 | None | ITEM CODE-9.25 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 840.0 | 840.0 | 144.74 | False | None | None | False | None | False | 121581.6 | 0 | | 2384002 | 70910 | None | ITEM CODE-22.15.1 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge. SS Handles 200mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 86.1 | 86.1 | 100.0 | False | None | None | False | None | False | 8610.0 | 0 | | 2384003 | 70910 | None | ITEM CODE-22.15.3 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 353.85 | 353.85 | 100.0 | False | None | None | False | None | False | 35385.0 | 0 | | 2384004 | 70910 | None | ITEM CODE-22.15.5 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge. SS Tower Bolts 150x10mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 193.2 | 193.2 | 200.0 | False | None | None | False | None | False | 38640.0 | 0 | | 2384005 | 70910 | None | ITEM CODE-22.15.8 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge. SS hinges 125 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 114.45 | 114.45 | 300.0 | False | None | None | False | None | False | 34335.0 | 0 | | 2384006 | 70910 | None | ITEM CODE-22.15.10 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge. SS Door stopper 75mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 115.45 | 115.45 | 100.0 | False | None | None | False | None | False | 11545.0 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-FIRST FLOOR | 28900633.58 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384007 | 70911 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. COLULMNS (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12336.9 | 12336.9 | 73.14 | False | None | None | False | None | False | 902320.866 | 0 | | 2384008 | 70911 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.LINTEL & ROOF BEAM (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11611.2 | 11611.2 | 125.29 | False | None | None | False | None | False | 1454767.248 | 0 | | 2384009 | 70911 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ROOF SLAB (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10885.5 | 10885.5 | 286.93 | False | None | None | False | None | False | 3123376.515 | 0 | | 2384010 | 70911 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. STAIRCASE (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10885.5 | 10885.5 | 26.61 | False | None | None | False | None | False | 289663.155 | 0 | | 2384011 | 70911 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. CHEJJA (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10195.11 | 10195.11 | 9.09 | False | None | None | False | None | False | 92673.5499 | 0 | | 2384012 | 70911 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. WALL SHELVES (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10195.11 | 10195.11 | 7.62 | False | None | None | False | None | False | 77686.7382 | 0 | | 2384013 | 70911 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. LOFT (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10195.11 | 10195.11 | 3.46 | False | None | None | False | None | False | 35275.0806 | 0 | | 2384014 | 70911 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (CILL CONCRETE) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6593.12 | 6593.12 | 4.39 | False | None | None | False | None | False | 28943.7968 | 0 | | 2384015 | 70911 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 94869.14 | 94869.14 | 44.17 | False | None | None | False | None | False | 4190369.9138 | 0 | | 2384016 | 70911 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1389.25 | 1389.25 | 3079.91 | False | None | None | False | None | False | 4278764.9675 | 0 | | 2384017 | 70911 | None | ITEM CODE-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1095.49 | 1095.49 | 294.08 | False | None | None | False | None | False | 322161.6992 | 0 | | 2384018 | 70911 | None | ITEM CODE-12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage
charges complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 104793.3 | 104793.3 | 2.79 | False | None | None | False | None | False | 292373.307 | 0 | | 2384019 | 70911 | None | ITEM CODE-12.57.2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3704.32 | 3704.32 | 91.56 | False | None | None | False | None | False | 339167.5392 | 0 | | 2384020 | 70911 | None | ITEM CODE-12.93.1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately). Size 62 x 100mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 744.47 | 744.47 | 227.7 | False | None | None | False | None | False | 169515.819 | 0 | | 2384021 | 70911 | None | ITEM CODE-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately). 30 mm thickness ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3695.84 | 3695.84 | 72.45 | False | None | None | False | None | False | 267763.608 | 0 | | 2384022 | 70911 | None | ITEM CODE-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6064.99 | 6064.99 | 22.95 | False | None | None | False | None | False | 139191.5205 | 0 | | 2384023 | 70911 | None | ITEM CODE-12.9 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7141.4 | 7141.4 | 144.24 | False | None | None | False | None | False | 1030075.536 | 0 | | 2384024 | 70911 | None | ITEM CODE-12.86 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 5716.09 | 5716.09 | 85.14 | False | None | None | False | None | False | 486667.9026 | 0 | | 2384025 | 70911 | None | ITEM CODE-11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 178.16 | 178.16 | 4591.75 | False | None | None | False | None | False | 818066.18 | 0 | | 2384026 | 70911 | None | ITEM CODE-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 312.84 | 312.84 | 3974.37 | False | None | None | False | None | False | 1243341.9108 | 0 | | 2384027 | 70911 | None | ITEM CODE-8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 393.44 | 393.44 | 2203.96 | False | None | None | False | None | False | 867126.0224 | 0 | | 2384028 | 70911 | None | ITEM CODE-8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 106.05 | 106.05 | 5097.43 | False | None | None | False | None | False | 540582.4515 | 0 | | 2384029 | 70911 | None | ITEM CODE-8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 116.65 | 116.65 | 5097.43 | False | None | None | False | None | False | 594615.2095 | 0 | | 2384030 | 70911 | None | ITEM CODE-8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 56.2 | 56.2 | 5097.43 | False | None | None | False | None | False | 286475.566 | 0 | | 2384031 | 70911 | None | ITEM CODE-8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 184.52 | 184.52 | 2203.96 | False | None | None | False | None | False | 406674.6992 | 0 | | 2384032 | 70911 | None | ITEM CODE-8.41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 177.1 | 177.1 | 517.2 | False | None | None | False | None | False | 91596.12 | 0 | | 2384033 | 70911 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 121.95 | 121.95 | 195.84 | False | None | None | False | None | False | 23882.688 | 0 | | 2384034 | 70911 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 121.95 | 121.95 | 524.77 | False | None | None | False | None | False | 63995.7015 | 0 | | 2384035 | 70911 | None | ITEM CODE-9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3024.54 | 3024.54 | 1301.68 | False | None | None | False | None | False | 3936983.2272 | 0 | | 2384036 | 70911 | None | ITEM CODE-9.21.2 | Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1406.22 | 1406.22 | 337.88 | False | None | None | False | None | False | 475133.6136 | 0 | | 2384037 | 70911 | None | ITEM CODE-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 942.78 | 942.78 | 279.84 | False | None | None | False | None | False | 263827.5552 | 0 | | 2384038 | 70911 | None | ITEM CODE-9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1536.66 | 1536.66 | 471.84 | False | None | None | False | None | False | 725057.6544 | 0 | | 2384039 | 70911 | None | ITEM CODE-8.16.2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 40.29 | 40.29 | 1500.0 | False | None | None | False | None | False | 60435.0 | 0 | | 2384040 | 70911 | None | ITEM CODE-11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 599.18 | 599.18 | 400.0 | False | None | None | False | None | False | 239672.0 | 0 | | 2384041 | 70911 | None | ITEM CODE-8.83 | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications. Specification. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1312.89 | 1312.89 | 58.8 | False | None | None | False | None | False | 77197.932 | 0 | | 2384042 | 70911 | None | ITEM CODE-7.18 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2139.02 | 2139.02 | 91.4 | False | None | None | False | None | False | 195506.428 | 0 | | 2384043 | 70911 | None | ITEM CODE-15.11 | Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof,bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break 120% as per ASTM D 412, Tensile strength 1N/mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 652.2 | 652.2 | 518.56 | False | None | None | False | None | False | 338204.832 | 0 | | 2384044 | 70911 | None | ITEM CODE-22.15.1 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Handles 200mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 477.22 | 477.22 | 100.0 | False | None | None | False | None | False | 47722.0 | 0 | | 2384045 | 70911 | None | ITEM CODE-22.15.3 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 318.15 | 318.15 | 100.0 | False | None | None | False | None | False | 31815.0 | 0 | | 2384046 | 70911 | None | ITEM CODE-22.15.5 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower Bolts 150x10mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 127.26 | 127.26 | 200.0 | False | None | None | False | None | False | 25452.0 | 0 | | 2384047 | 70911 | None | ITEM CODE-22.15.8 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS hinges 125 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 53.02 | 53.02 | 300.0 | False | None | None | False | None | False | 15906.0 | 0 | | 2384048 | 70911 | None | ITEM CODE-22.15.10 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Door stopper 75mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 106.05 | 106.05 | 100.0 | False | None | None | False | None | False | 10605.0 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-TERRACE FLOOR | 17591100.22 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384049 | 70912 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. COLULMNS (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12459.05 | 12459.05 | 12.55 | False | None | None | False | None | False | 156361.0775 | 0 | | 2384050 | 70912 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. COLULMNS (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11319.29 | 11319.29 | 19.72 | False | None | None | False | None | False | 223216.3988 | 0 | | 2384051 | 70912 | None | ITEM CODE-2.5.2 | Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (LINTEL& ROOF BEAM) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11726.16 | 11726.16 | 16.82 | False | None | None | False | None | False | 197234.0112 | 0 | | 2384052 | 70912 | None | ITEM CODE-2.5.2 | Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (ROOF SLAB) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10993.27 | 10993.27 | 33.3 | False | None | None | False | None | False | 366075.891 | 0 | | 2384053 | 70912 | None | ITEM CODE-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CHEJJA) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10296.05 | 10296.05 | 0.63 | False | None | None | False | None | False | 6486.5115 | 0 | | 2384054 | 70912 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (CILL CONCRETE) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6658.4 | 6658.4 | 7.64 | False | None | None | False | None | False | 50870.176 | 0 | | 2384055 | 70912 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 95808.44 | 95808.44 | 8.43 | False | None | None | False | None | False | 807665.1492 | 0 | | 2384056 | 70912 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1403.01 | 1403.01 | 843.39 | False | None | None | False | None | False | 1183284.6039 | 0 | | 2384057 | 70912 | None | ITEM CODE-12.9 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7212.11 | 7212.11 | 20.79 | False | None | None | False | None | False | 149939.7669 | 0 | | 2384058 | 70912 | None | ITEM CODE-11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 179.92 | 179.92 | 665.91 | False | None | None | False | None | False | 119810.5272 | 0 | | 2384059 | 70912 | None | ITEM CODE-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 315.94 | 315.94 | 351.0 | False | None | None | False | None | False | 110894.94 | 0 | | 2384060 | 70912 | None | ITEM CODE-8.6.2 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 397.34 | 397.34 | 1570.0 | False | None | None | False | None | False | 623823.8 | 0 | | 2384061 | 70912 | None | ITEM CODE-8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 107.1 | 107.1 | 476.0 | False | None | None | False | None | False | 50979.6 | 0 | | 2384062 | 70912 | None | ITEM CODE-8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 117.81 | 117.81 | 476.0 | False | None | None | False | None | False | 56077.56 | 0 | | 2384063 | 70912 | None | ITEM CODE-8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 56.76 | 56.76 | 476.0 | False | None | None | False | None | False | 27017.76 | 0 | | 2384064 | 70912 | None | ITEM CODE-8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 186.35 | 186.35 | 1570.0 | False | None | None | False | None | False | 292569.5 | 0 | | 2384065 | 70912 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 123.16 | 123.16 | 76.1 | False | None | None | False | None | False | 9372.476 | 0 | | 2384066 | 70912 | None | ITEM CODE-15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 875.0 | 875.0 | 466.75 | False | None | None | False | None | False | 408406.25 | 0 | | 2384067 | 70912 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6658.4 | 6658.4 | 23.33 | False | None | None | False | None | False | 155340.472 | 0 | | 2384068 | 70912 | None | ITEM CODE-11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 145.65 | 145.65 | 70414.0 | False | None | None | False | None | False | 10255799.1 | 0 | | 2384069 | 70912 | None | ITEM CODE-7.1.1 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 941.4 | 941.4 | 2278.1 | False | None | None | False | None | False | 2144603.34 | 0 | | 2384070 | 70912 | None | ITEM CODE-7.4.1 | Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings. 0.63 mm thick with zinc coating not less than 275 g/m² ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 684.36 | 684.36 | 142.0 | False | None | None | False | None | False | 97179.12 | 0 | | 2384071 | 70912 | None | ITEM CODE-7.6 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 690.79 | 690.79 | 142.0 | False | None | None | False | None | False | 98092.18 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-WATERSUPPLY AND SANITATION | 4880454.26 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384072 | 70913 | None | ITEM CODE-9.1.2 | Providing, laying and jointing HDPE pipes of specified grade and
conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE Grade PE80-PN6.0, 75mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 257.25 | 257.25 | 1000.0 | False | None | None | False | None | False | 257250.0 | 0 | | 2384073 | 70913 | None | ITEM CODE-13.33.6 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 50mm nominal OD pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 757.05 | 757.05 | 670.0 | False | None | None | False | None | False | 507223.5 | 0 | | 2384074 | 70913 | None | ITEM CODE-13.32.2 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of engineer incharge . Concealed work including cutting chases and good the walls etc. 20 mm nominal OD pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 397.95 | 397.95 | 490.0 | False | None | None | False | None | False | 194995.5 | 0 | | 2384075 | 70913 | None | ITEM CODE-13.32.4 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of engineer incharge . Concealed work including cutting chases and good the walls etc. 32 mm nominal OD pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 583.8 | 583.8 | 275.0 | False | None | None | False | None | False | 160545.0 | 0 | | 2384076 | 70913 | None | ITEM CODE-N180F | Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark For 50 mm dia GM (Copper alloy) Gate valves ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1772.4 | 1772.4 | 10.0 | False | None | None | False | None | False | 17724.0 | 0 | | 2384077 | 70913 | None | ITEM CODE-N190F | Providing GM (copper alloy) reflex valves/ globe valves confirming to Class-I and as per IS 778/1990 with latest amendments, 1 No. and with ISI mark screwed female ends confirming to IS 554/ 1990 horizontal body hydraulically tested for 1.50 HP and seat hydraulically tested 1 HP. For 50 mm dia GM (Copper alloy) Globe valves ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 833.7 | 833.7 | 5.0 | False | None | None | False | None | False | 4168.5 | 0 | | 2384078 | 70913 | None | ITEM CODE-1.17.1 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 203.7 | 203.7 | 474.75 | False | None | None | False | None | False | 96706.575 | 0 | | 2384079 | 70913 | None | ITEM CODE-1.10. | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 128.1 | 128.1 | 474.75 | False | None | None | False | None | False | 60815.475 | 0 | | 2384080 | 70913 | None | ITEM CODE-T130B | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5225.85 | 5225.85 | 50.0 | False | None | None | False | None | False | 261292.5 | 0 | | 2384081 | 70913 | None | ITEM CODE-T130C | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 4057.2 | 4057.2 | 25.0 | False | None | None | False | None | False | 101430.0 | 0 | | 2384082 | 70913 | None | ITEM CODE-13.34 | Providing and placing on terrace (at all floor levels), polyethylene water storage tanks IS:12701 marked, with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, But without Fittings and the base support ofr tank. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Ltr | 9.45 | 9.45 | 30000.0 | False | None | None | False | None | False | 283500.0 | 0 | | 2384083 | 70913 | None | ITEM CODE-13.17.4 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 g ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 254.1 | 254.1 | 230.0 | False | None | None | False | None | False | 58443.0 | 0 | | 2384084 | 70913 | None | ITEM CODE-13.8.2.2 | Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length, 20 mm nominal bore ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 115.5 | 115.5 | 160.0 | False | None | None | False | None | False | 18480.0 | 0 | | 2384085 | 70913 | None | ITEM CODE-14.2.1 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5079.9 | 5079.9 | 14.0 | False | None | None | False | None | False | 71118.6 | 0 | | 2384086 | 70913 | None | ITEM CODE-14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5128.2 | 5128.2 | 65.0 | False | None | None | False | None | False | 333333.0 | 0 | | 2384087 | 70913 | None | ITEM CODE-14.5.1 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9074.1 | 9074.1 | 24.0 | False | None | None | False | None | False | 217778.4 | 0 | | 2384088 | 70913 | None | ITEM CODE-14.7.3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Unit | 3009.3 | 3009.3 | 30.0 | False | None | None | False | None | False | 90279.0 | 0 | | 2384089 | 70913 | None | ITEM CODE-14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Unit | 1281.0 | 1281.0 | 36.0 | False | None | None | False | None | False | 46116.0 | 0 | | 2384090 | 70913 | None | ITEM CODE-14.40.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Unit | 520.8 | 520.8 | 59.0 | False | None | None | False | None | False | 30727.2 | 0 | | 2384091 | 70913 | None | ITEM CODE-601 | Providing & fixing in position 75x75 mm PVC 'P' traps of self cleansing design with outlet size of 75 mm diameter of approved make, including making connection with PVC soil / waste pipes using rubber gaskets, embedding the trap in 150 mm thick PCC 1:2:4 and fixing of top tile & strainer of approved make on top of the trap etc., complete all as specified & directed. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 53.39 | 53.39 | 140.0 | False | None | None | False | None | False | 7474.6 | 0 | | 2384092 | 70913 | None | ITEM CODE-516 | S.C.I. gully or nahani grating 100 mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 26.25 | 26.25 | 140.0 | False | None | None | False | None | False | 3675.0 | 0 | | 2384093 | 70913 | None | ITEM CODE-13.22.1.2 | Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 103.95 | 103.95 | 140.0 | False | None | None | False | None | False | 14553.0 | 0 | | 2384094 | 70913 | None | ITEM CODE-16.15.10 | Providing and constructing "WIRE CUT BRICK MACHINEHOLE
CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , FOR 1.9M depth & SFRC cover & frame ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 50869.35 | 50869.35 | 14.0 | False | None | None | False | None | False | 712170.9 | 0 | | 2384095 | 70913 | None | ITEM CODE-30.50.9 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 100 mm nominal dia Pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 976.5 | 976.5 | 600.0 | False | None | None | False | None | False | 585900.0 | 0 | | 2384096 | 70913 | None | ITEM CODE-30.50.9 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 150 mm nominal dia Pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 1672.65 | 1672.65 | 360.0 | False | None | None | False | None | False | 602154.0 | 0 | | 2384097 | 70913 | None | ITEM CODE-13.48 | Providing and fixing on wall face unplasticized Rigid PVC Rain water pipes confirming to IS : 13592 Type A Including jointing with seal ring confirming to IS : 5382, Leaving 10mm gap for Thermal expansion, (i) Single Socked pipes 100mm daimeter. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 265.65 | 265.65 | 370.0 | False | None | None | False | None | False | 98290.5 | 0 | | 2384098 | 70913 | None | ITEM CODE-3 | provding and fixing 2HP monoblock Motor with all accessories.. For single phase…Make : ATALATA / SUGUNA / CRI/ KIRILOSAKAR ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 22155.0 | 22155.0 | 2.0 | False | None | None | False | None | False | 44310.0 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI -UG SUMP | 1137380.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384099 | 70914 | None | ITEM CODE-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 160.27 | False | None | None | False | None | False | 17164.917 | 0 | | 2384100 | 70914 | None | ITEM CODE-1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Deduct 5% per mif rollers are not used and tamping is done manually. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 497.7 | 497.7 | 48.6 | False | None | None | False | None | False | 24188.22 | 0 | | 2384101 | 70914 | None | ITEM CODE-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6511.05 | 6511.05 | 8.9 | False | None | None | False | None | False | 57948.345 | 0 | | 2384102 | 70914 | None | ITEM CODE-2.2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (FOOTING) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7318.08 | 7318.08 | 52.0 | False | None | None | False | None | False | 380540.16 | 0 | | 2384103 | 70914 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 6.24 | False | None | None | False | None | False | 586122.264 | 0 | | 2384104 | 70914 | None | ITEM CODE-15.2 | Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 603.75 | 603.75 | 114.0 | False | None | None | False | None | False | 68827.5 | 0 | | 2384105 | 70914 | None | ITEM CODE-16.61.2 | Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc.with all lead and lifts. HEAVY DUTY ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1294.65 | 1294.65 | 2.0 | False | None | None | False | None | False | 2589.3 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-BOREWELL | 1468068.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384106 | 70915 | None | ITEM CODE-12.4 | Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depthof drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5552.4 | 5552.4 | 2.0 | False | None | None | False | None | False | 11104.8 | 0 | | 2384107 | 70915 | None | ITEM CODE-12.1.1 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 0 to 50 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 388.5 | 388.5 | 100.0 | False | None | None | False | None | False | 38850.0 | 0 | | 2384108 | 70915 | None | ITEM CODE-12.1.2 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 50 to 100 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 487.2 | 487.2 | 100.0 | False | None | None | False | None | False | 48720.0 | 0 | | 2384109 | 70915 | None | ITEM CODE-12.1.3 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 100 to 150 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 517.65 | 517.65 | 100.0 | False | None | None | False | None | False | 51765.0 | 0 | | 2384110 | 70915 | None | ITEM CODE-12.1.4 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 150 to 200 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 600.6 | 600.6 | 100.0 | False | None | None | False | None | False | 60060.0 | 0 | | 2384111 | 70915 | None | ITEM CODE-12.1.5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 200 to 250 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 704.55 | 704.55 | 100.0 | False | None | None | False | None | False | 70455.0 | 0 | | 2384112 | 70915 | None | ITEM CODE-12.1.6 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 250 to 300 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 777.0 | 777.0 | 100.0 | False | None | None | False | None | False | 77700.0 | 0 | | 2384113 | 70915 | None | ITEM CODE-9.1.2 | Providing, laying and jointing HDPE pipes of specified grade and
conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE Grade PE80-PN6.0, 75mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 257.25 | 257.25 | 500.0 | False | None | None | False | None | False | 128625.0 | 0 | | 2384114 | 70915 | None | ITEM CODE-1.17.1 | Earth work excavation for pipeline trenches in all kinds of soils by
mechanical means above 600 mm trench width as per drawing and
technical specifications, including setting out, construction of shoring,
strutting, barricading, caution lights, bracing, using sight rails & boning
rods at every 100 mm whevere necessary as directed, removal of
stumps and other deleterious matter, dressing of sides and levelling
the bottom of trench to the extent required , utilising the available
excavated earth locally for the work etc., and all other appurtenances
complete in the following strata. All kinds of soils. Depth upto 1.50 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 275.1 | 275.1 | 225.0 | False | None | None | False | None | False | 61897.5 | 0 | | 2384115 | 70915 | None | ITEM CODE-1.1 | Refilling available earth around trenches/pipelines, cables in layers
not exceeding 20 cms in depth, compacting each deposited layer by
ramming after watering with a lead upto 50 m , and lift upto 1.5 m.
Including cost of all labour complete as per specifications ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 168.0 | 168.0 | 225.0 | False | None | None | False | None | False | 37800.0 | 0 | | 2384116 | 70915 | None | ITEM CODE-13.28 | Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC
Column pipes with heavy duty collars,rubber profile ring,vibration
control profile ring,freezing and turbulence free leak proof EPDM ring
with ISI mark with its latest amendments ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 577.5 | 577.5 | 700.0 | False | None | None | False | None | False | 404250.0 | 0 | | 2384117 | 70915 | None | ITEM CODE-13.22.4 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 m2 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 194.25 | 194.25 | 800.0 | False | None | None | False | None | False | 155400.0 | 0 | | 2384118 | 70915 | None | ITEM CODE-13.16.7 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 10.00 HP - 90 LPM @ 220 m = 20 STG Outlet Dia - 2.00" ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 57342.6 | 57342.6 | 2.0 | False | None | None | False | None | False | 114685.2 | 0 | | 2384119 | 70915 | None | ITEM CODE-13.25.1 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 1312.5 | 1312.5 | 2.0 | False | None | None | False | None | False | 2625.0 | 0 | | 2384120 | 70915 | None | ITEM CODE-12.32 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe
grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and
latest ammendments, electrical resistance welded steel tubes, material
and conforming to IS 1387-1993 and manufactured by basic open
hearth electric or basic oxygen process in random length of 5-7m both
ends.threaded conforming to IS 554-1985 one end fixed with socket
conforming to IS 4270-2001 and the other end with screwed pipes all
shall be responsibaly free from defects. The tubes shall be responsible
straight end should be with ISI marking weighing 25.10kg/m.prices
include Collar-Medium duty. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 2029.65 | 2029.65 | 70.0 | False | None | None | False | None | False | 142075.5 | 0 | | 2384121 | 70915 | None | ITEM CODE-11.15.6 | Supply and delivery at site GM (copper alloy) gate valves confirming to
Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet
inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 50 mm dia GM (Copper alloy) Gate valves ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 1772.4 | 1772.4 | 4.0 | False | None | None | False | None | False | 7089.6 | 0 | | 2384122 | 70915 | None | ITEM CODE-10.6 | RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm etc. complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 17221.05 | 17221.05 | 2.0 | False | None | None | False | None | False | 34442.1 | 0 | | 2384123 | 70915 | None | ITEM CODE-10.7 | Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling, finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1976.1 | 1976.1 | 1.0 | False | None | None | False | None | False | 1976.1 | 0 | | 2384124 | 70915 | None | ITEM CODE-13.24.3 | Supply, installing,testing and commissioning COMMON control panel
consisting of the following INCOMING:1 No set of Phase indicating
lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog
Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING
for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable
for respective HP 1 No. Electrcal Protection Like single Phase preventor,
under voltage over Volage, under current over current & dry run
protection suitable for the pump described above 1 no Indoor type NOTE:
1) DOL- Direct Online Starter
2) S-D- Star Delta Starter etc. complete.. 6 to 15 HP pumps ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 18375.0 | 18375.0 | 1.0 | False | None | None | False | None | False | 18375.0 | 0 | | 2384125 | 70915 | None | ITEM CODE-12.34 | Providing and laying at site of work MS casing caps as per IS 1239 (partx005fI) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 172.2 | 172.2 | 1.0 | False | None | None | False | None | False | 172.2 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-STP | 2281442.56 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384126 | 70916 | None | ITEM CODE-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 341.0 | False | None | None | False | None | False | 36521.1 | 0 | | 2384127 | 70916 | None | ITEM CODE-1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Deduct 5% per mif rollers are not used and tamping is done manually. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 497.7 | 497.7 | 34.1 | False | None | None | False | None | False | 16971.57 | 0 | | 2384128 | 70916 | None | ITEM CODE-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface ofconsolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per
specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 123.9 | 123.9 | 80.0 | False | None | None | False | None | False | 9912.0 | 0 | | 2384129 | 70916 | None | ITEM CODE-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6511.05 | 6511.05 | 10.0 | False | None | None | False | None | False | 65110.5 | 0 | | 2384130 | 70916 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 11.0 | False | None | None | False | None | False | 15130.5 | 0 | | 2384131 | 70916 | None | ITEM CODE-2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Footings) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7318.08 | 7318.08 | 91.0 | False | None | None | False | None | False | 665945.28 | 0 | | 2384132 | 70916 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Tonne | 93929.85 | 93929.85 | 10.92 | False | None | None | False | None | False | 1025713.962 | 0 | | 2384133 | 70916 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 98.0 | False | None | None | False | None | False | 134799.0 | 0 | | 2384134 | 70916 | None | ITEM CODE-11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 176.4 | 176.4 | 399.0 | False | None | None | False | None | False | 70383.6 | 0 | | 2384135 | 70916 | None | ITEM CODE-12.86 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6226.5 | 6226.5 | 3.0 | False | None | None | False | None | False | 18679.5 | 0 | | 2384136 | 70916 | None | ITEM CODE-11.5.1 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 4701.9 | 4701.9 | 5.0 | False | None | None | False | None | False | 23509.5 | 0 | | 2384137 | 70916 | None | ITEM CODE-9.1 | Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 473.55 | 473.55 | 40.0 | False | None | None | False | None | False | 18942.0 | 0 | | 2384138 | 70916 | None | ITEM CODE-8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 389.55 | 389.55 | 99.0 | False | None | None | False | None | False | 38565.45 | 0 | | 2384139 | 70916 | None | ITEM CODE-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 309.75 | 309.75 | 94.0 | False | None | None | False | None | False | 29116.5 | 0 | | 2384140 | 70916 | None | ITEM CODE-8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 115.5 | 115.5 | 83.0 | False | None | None | False | None | False | 9586.5 | 0 | | 2384141 | 70916 | None | ITEM CODE-15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 857.85 | 857.85 | 40.0 | False | None | None | False | None | False | 34314.0 | 0 | | 2384142 | 70916 | None | ITEM CODE-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 55.65 | 55.65 | 19.0 | False | None | None | False | None | False | 1057.35 | 0 | | 2384143 | 70916 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.40) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 19.0 | False | None | None | False | None | False | 2294.25 | 0 | | 2384144 | 70916 | None | ITEM CODE-10.1.8 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For. PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 648.9 | 648.9 | 100.0 | False | None | None | False | None | False | 64890.0 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-STP MACHINE | 2566599.43 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384145 | 70917 | None | ITEMCODE-DR 1 | Supplying , installing , testing , commissioning of bar screen to exclude the large sized particles with associated set of guide angles in MS flat of 6.0 mm thick and 50 mm wide kept inclined at 45 degree . Size : 600 x 600 ( MS Construction ) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 22982.4 | 22982.4 | 1.0 | False | None | None | False | None | False | 22982.4 | 0 | | 2384146 | 70917 | None | ITEMCODE-DR 2 | Supplying , installing , testing , commissioning of Raw Sewage Pump (Centrifugal/Submersible).The pump shall be coupled to the adequate HP , electric motor , mounted on a common base frame (1W + 1S) Duty: 10 KLH @ 6-10 M head. (1W+1S) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 60480.0 | 60480.0 | 2.0 | False | None | None | False | None | False | 120960.0 | 0 | | 2384147 | 70917 | None | ITEMCODE-DR 3 | Supplying , installing , testing , commissioning of Coarse bubble diffusers 90 dia x 800mm long UPVC pipe grid with necessary orifices suitable for 6.0 kg/cm2 pressure rating to provide clog-free oxygen. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 7257.6 | 7257.6 | 8.0 | False | None | None | False | None | False | 58060.8 | 0 | | 2384148 | 70917 | None | ITEMCODE-DR 4 | Supplying , installing , testing , commissioning of Fine bubble diffusers 90 dia x 1000mm long with the membrane from SCOGEN shall consists of set of membranes , SS 304 clips , nylon rope braided hose with all accessories to make it retrievable . ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 10523.52 | 10523.52 | 12.0 | False | None | None | False | None | False | 126282.24 | 0 | | 2384149 | 70917 | None | ITEMCODE-DR 5 | Supplying , installing , testing , commissioning of approved make Twin Lobe roots type air blower of adequate capacity at 0.5 kg/cm2 capacity of required head comprising of common base frame , suction filter , suction silencer , non return , V belt , safety valve , belt guard , drive and driven pulleys , pressure gauge , inter connection piping , discharge silencer including required motor. Duty: 100 M3 /hr @ 0.5 KG/CM2 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 223776.0 | 223776.0 | 2.0 | False | None | None | False | None | False | 447552.0 | 0 | | 2384150 | 70917 | None | ITEMCODE-DR 6 | Supplying , installing , testing , commissioning of sludge disposal pumps to pump the sludge from SBR tank to sludge holding tank with wetted parts in CI construction. The pump shall be coupled to the adquate H.P electrical motor , mounted on a base frame . Duty: 10 KLH @10 M head. (1W) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 42336.0 | 42336.0 | 1.0 | False | None | None | False | None | False | 42336.0 | 0 | | 2384151 | 70917 | None | ITEMCODE-DR 7 | Supplying , installing , testing , commissioning of Filter Feed Pump consisting of Submersible type filter feed pumps to feed semi treated water to secondary treatment process through the filters.The pump shall be coupled to the adequate HP electrical motor , mounted on a common base frame . Duty: 30 KLH @ 30 M head. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 48384.0 | 48384.0 | 2.0 | False | None | None | False | None | False | 96768.0 | 0 | | 2384152 | 70917 | None | ITEMCODE-DR 8 | Supplying , installing , testing , commissioning of Chlorine Dosing System consisting of Dosing pump and 100 ltrs Solution Tank having detachable lid with molded inserts for mounting of pump . Capacity :0 - 6lph (1w ) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 31691.52 | 31691.52 | 1.0 | False | None | None | False | None | False | 31691.52 | 0 | | 2384153 | 70917 | None | ITEMCODE-DR 9 | Supplying , installing , testing , commissioning of Pressure Sand filter for filtration of treated sewage. The filter shall be made of MS with epoxy painting with first charge of media, frontal face piping and multiport valves Size : 800 mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 254016.0 | 254016.0 | 1.0 | False | None | None | False | None | False | 254016.0 | 0 | | 2384154 | 70917 | None | ITEMCODE-DR 10 | Supplying , installing , testing , commissioning of Activated Carbon filter for filtration of treated sewage, The filter shall be made of MS with epoxy painting with first charge of media, frontal face piping and multiport valves. Size : 800 mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 296352.0 | 296352.0 | 1.0 | False | None | None | False | None | False | 296352.0 | 0 | | 2384155 | 70917 | None | ITEMCODE-DR 11 | Supply , fixing , testing & commissioning of automatic PLC decant valve for suitable dia with auto electrical operated with isolation ( butterfly valve ) at suitable time as required opening & Closing automatically cost including all pipes with necessary fittings , electrical connection wiring etc complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos. | 90720.0 | 90720.0 | 1.0 | False | None | None | False | None | False | 90720.0 | 0 | | 2384156 | 70917 | None | ITEMCODE-DR 12 | Plant Piping with UPVC of 10 Kg/sqcm pipes with fittings and approved make valves, gauges, instrumentation etc., for all plumbing lines and MS B Class pipeline with fittings for Blower Air Lines ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Lot | 243129.6 | 243129.6 | 1.0 | False | None | None | False | None | False | 243129.6 | 0 | | 2384157 | 70917 | None | ITEMCODE-DR 13 | Supplying , installing , testing , commissioning of STP Treated Water transfer pump.The pump shall be submersible type coupled to the adequate HP electrical motor. Duty: 6 KLH @ 30 M head. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No. | 43954.44 | 43954.44 | 1.0 | False | None | None | False | None | False | 43954.44 | 0 | | 2384158 | 70917 | None | ITEMCODE-DR 14 | Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin proof Panel (Indoor non compartmental type) with IP 54 ingress protection, fabricated from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors including the cost of interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system with 16 KA rupturing capacity at 415 volts complete. Electrical Motor Control Centre shall be suitable for all equipments connected to the STP with 2 No of spare feeders ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 290304.0 | 290304.0 | 1.0 | False | None | None | False | None | False | 290304.0 | 0 | | 2384159 | 70917 | None | ITEMCODE-DR 15 | Inter unit cabling for all equipments with necessary armoured/ unarmoured cables with necessary termination lugs, glands etc complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Lot | 62802.43 | 62802.43 | 1.0 | False | None | None | False | None | False | 62802.43 | 0 | | 2384160 | 70917 | None | ITEMCODE-DR 16 | Maintainance Charges including Man power required during maintainance period( Rs 12500/month for 12 Months) for 1 shift and Consumables required for functioning and maintainance of 50KLD Sewage Treatment Plant ( Rs 2500/- per month for 12 Months) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Month | 28224.0 | 28224.0 | 12.0 | False | None | None | False | None | False | 338688.0 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI- INTERNAL ELECTRICAL WORKS | 7166299.37 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384161 | 70918 | None | Item code-1.2.1 | Concealed Conduit System Supplying 19/20 mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 69.3 | 69.3 | 6855.0 | False | None | None | False | None | False | 475051.5 | 0 | | 2384162 | 70918 | None | Item code-1.1.1 | Open Conduit System Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 72.45 | 72.45 | 1250.0 | False | None | None | False | None | False | 90562.5 | 0 | | 2384163 | 70918 | None | Item code-1.2.2 | Concealed Conduit System Supplying 25 mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 81.9 | 81.9 | 2750.0 | False | None | None | False | None | False | 225225.0 | 0 | | 2384164 | 70918 | None | Item code-1.3.1 | Supplying 19/20 dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 71.4 | 71.4 | 3725.0 | False | None | None | False | None | False | 265965.0 | 0 | | 2384165 | 70918 | None | Item code-1.3.2 | Supplying 25 mm dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 372.75 | 372.75 | 1010.0 | False | None | None | False | None | False | 376477.5 | 0 | | 2384166 | 70918 | None | Item code-2.1.1 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Short point upto 3m from tapping point to out let via switch box ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 299.25 | 299.25 | 74.0 | False | None | None | False | None | False | 22144.5 | 0 | | 2384167 | 70918 | None | Item code-2.1.2 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Medium point above - 3Mtr up to 6Mtr from tapping point to out let via switch ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 413.7 | 413.7 | 93.0 | False | None | None | False | None | False | 38474.1 | 0 | | 2384168 | 70918 | None | Item code-2.1.3 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 598.5 | 598.5 | 129.0 | False | None | None | False | None | False | 77206.5 | 0 | | 2384169 | 70918 | None | Item code-2.1.4 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 743.4 | 743.4 | 213.0 | False | None | None | False | None | False | 158344.2 | 0 | | 2384170 | 70918 | None | Item code-2.1.5 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 1086.75 | 1086.75 | 123.0 | False | None | None | False | None | False | 133670.25 | 0 | | 2384171 | 70918 | None | Item code-3.4.1 | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-3 Way ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 166.95 | 166.95 | 943.0 | False | None | None | False | None | False | 157433.85 | 0 | | 2384172 | 70918 | None | Item code-3.4.2 | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 Way ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 185.85 | 185.85 | 225.0 | False | None | None | False | None | False | 41816.25 | 0 | | 2384173 | 70918 | None | Item code-3.4.3 | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 Way ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 231.0 | 231.0 | 108.0 | False | None | None | False | None | False | 24948.0 | 0 | | 2384174 | 70918 | None | Item code-3.4.4 | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 274.05 | 274.05 | 82.0 | False | None | None | False | None | False | 22472.1 | 0 | | 2384175 | 70918 | None | Item code-3.4.5 | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 334.95 | 334.95 | 68.0 | False | None | None | False | None | False | 22776.6 | 0 | | 2384176 | 70918 | None | Item code-3.4.6 | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 16Way ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 381.15 | 381.15 | 42.0 | False | None | None | False | None | False | 16008.3 | 0 | | 2384177 | 70918 | None | Item code-3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 1 to 3 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 169.05 | 169.05 | 943.0 | False | None | None | False | None | False | 159414.15 | 0 | | 2384178 | 70918 | None | Item code-3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 4 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 183.75 | 183.75 | 225.0 | False | None | None | False | None | False | 41343.75 | 0 | | 2384179 | 70918 | None | Item code-3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 6 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 245.7 | 245.7 | 108.0 | False | None | None | False | None | False | 26535.6 | 0 | | 2384180 | 70918 | None | Item code-3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 8 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 298.2 | 298.2 | 82.0 | False | None | None | False | None | False | 24452.4 | 0 | | 2384181 | 70918 | None | Item code-3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 10 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 361.2 | 361.2 | 68.0 | False | None | None | False | None | False | 24561.6 | 0 | | 2384182 | 70918 | None | Item code-3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 12 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 361.2 | 361.2 | 68.0 | False | None | None | False | None | False | 24561.6 | 0 | | 2384183 | 70918 | None | Item code-3.5.7 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 16 Module ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 416.85 | 416.85 | 42.0 | False | None | None | False | None | False | 17507.7 | 0 | | 2384184 | 70918 | None | Item code-3.6.1 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps One Way. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 107.1 | 107.1 | 504.0 | False | None | None | False | None | False | 53978.4 | 0 | | 2384185 | 70918 | None | Item code-3.6.2 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two Way. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 174.3 | 174.3 | 74.0 | False | None | None | False | None | False | 12898.2 | 0 | | 2384186 | 70918 | None | Item code-3.6.3 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 179.55 | 179.55 | 504.0 | False | None | None | False | None | False | 90493.2 | 0 | | 2384187 | 70918 | None | Item code-3.6.4 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 'Stepped Fan Regulator. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 374.85 | 374.85 | 208.0 | False | None | None | False | None | False | 77968.8 | 0 | | 2384188 | 70918 | None | Item code-3.6.9 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps Bell Push ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 185.85 | 185.85 | 13.0 | False | None | None | False | None | False | 2416.05 | 0 | | 2384189 | 70918 | None | Item code-3.6.11 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps Universal Socket ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 247.8 | 247.8 | 98.0 | False | None | None | False | None | False | 24284.4 | 0 | | 2384190 | 70918 | None | Item code-3.6.7 | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 189.0 | 189.0 | 98.0 | False | None | None | False | None | False | 18522.0 | 0 | | 2384191 | 70918 | None | Item code-3.6.12 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone socket ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 163.8 | 163.8 | 8.0 | False | None | None | False | None | False | 1310.4 | 0 | | 2384192 | 70918 | None | Item code-3.6.13 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 RJ45/I.O Outlet Cat-6 Socket ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 353.85 | 353.85 | 46.0 | False | None | None | False | None | False | 16277.1 | 0 | | 2384193 | 70918 | None | Item code-8.2.2 | Supplying and drawing PVC flexible two pair telephone unarmoured tinned copper cable. 2
Pair. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 22.05 | 22.05 | 120.0 | False | None | None | False | None | False | 2646.0 | 0 | | 2384194 | 70918 | None | Item code-8.3 | Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG- 6 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 46.2 | 46.2 | 65.0 | False | None | None | False | None | False | 3003.0 | 0 | | 2384195 | 70918 | None | Item code-8.1 | Supplying and drawing UTP-CAT 6E LAN cable ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 35.7 | 35.7 | 700.0 | False | None | None | False | None | False | 24990.0 | 0 | | 2384196 | 70918 | None | Item code-2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 1.5 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 27.3 | 27.3 | 570.0 | False | None | None | False | None | False | 15561.0 | 0 | | 2384197 | 70918 | None | Item code-2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 2.5 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 44.1 | 44.1 | 1140.0 | False | None | None | False | None | False | 50274.0 | 0 | | 2384198 | 70918 | None | Item code-2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 4 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 66.15 | 66.15 | 2350.0 | False | None | None | False | None | False | 155452.5 | 0 | | 2384199 | 70918 | None | Item code-2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 6 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 96.6 | 96.6 | 3000.0 | False | None | None | False | None | False | 289800.0 | 0 | | 2384200 | 70918 | None | Item code-3.10.3 | Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws. 110mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 22.05 | 22.05 | 616.0 | False | None | None | False | None | False | 13582.8 | 0 | | 2384201 | 70918 | None | Item code-1.13 | Supplying and Fixing Metal Fan Box with Round Hook. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 122.85 | 122.85 | 208.0 | False | None | None | False | None | False | 25552.8 | 0 | | 2384202 | 70918 | None | Item code-12.45 | Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 34.65 | 34.65 | 1045.0 | False | None | None | False | None | False | 36209.25 | 0 | | 2384203 | 70918 | None | Item code-11.15 | Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 884.1 | 884.1 | 37.0 | False | None | None | False | None | False | 32711.7 | 0 | | 2384204 | 70918 | None | Item code-11.11.7 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 18W, 6500K ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 447.3 | 447.3 | 256.0 | False | None | None | False | None | False | 114508.8 | 0 | | 2384205 | 70918 | None | Item code-11.11.5 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 12W, 6500K ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 282.45 | 282.45 | 289.0 | False | None | None | False | None | False | 81628.05 | 0 | | 2384206 | 70918 | None | Item code-11.2.1 | Supplying & fixing retrofit type-PL- LED Lamp ...... W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 8-9 W ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 654.15 | 654.15 | 54.0 | False | None | None | False | None | False | 35324.1 | 0 | | 2384207 | 70918 | None | Item code-11.3.32 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard
electrical condition. - LED light fitting 1 x 4' - 20/22 W ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 724.5 | 724.5 | 468.0 | False | None | None | False | None | False | 339066.0 | 0 | | 2384208 | 70918 | None | Item code-11.9.1 | Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. - LED Floodlight 70W ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 7106.4 | 7106.4 | 7.0 | False | None | None | False | None | False | 49744.8 | 0 | | 2384209 | 70918 | None | Item code-13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. - On wall / celilin / Rafter / Girders ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 128.1 | 128.1 | 1104.0 | False | None | None | False | None | False | 141422.4 | 0 | | 2384210 | 70918 | None | Item code-13.5 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 170.1 | 170.1 | 7.0 | False | None | None | False | None | False | 1190.7 | 0 | | 2384211 | 70918 | None | Item code-6.2.1 | Supplying of 1440rpm heavy duty exhaust fan bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12"Sweep(300mm) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3117.45 | 3117.45 | 104.0 | False | None | None | False | None | False | 324214.8 | 0 | | 2384212 | 70918 | None | Item code-13.14 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 516.6 | 516.6 | 104.0 | False | None | None | False | None | False | 53726.4 | 0 | | 2384213 | 70918 | None | Item code-6.4.1 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) - 48" Sweep 5 Star (1200 mm) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2810.85 | 2810.85 | 208.0 | False | None | None | False | None | False | 584656.8 | 0 | | 2384214 | 70918 | None | Item code-13.1 | Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps, ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 179.55 | 179.55 | 208.0 | False | None | None | False | None | False | 37346.4 | 0 | | 2384215 | 70918 | None | Item code-5.6.5 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs
screws. - 15" x 12" x 2" ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 211.05 | 211.05 | 6.0 | False | None | None | False | None | False | 1266.3 | 0 | | 2384216 | 70918 | None | Item code-5.7.4 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 100A ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 725.55 | 725.55 | 24.0 | False | None | None | False | None | False | 17413.2 | 0 | | 2384217 | 70918 | None | Item code-5.9.3 | Supplying and fixing HRC fuse units base on existing switch / panel board - 100 to 300A ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 964.95 | 964.95 | 24.0 | False | None | None | False | None | False | 23158.8 | 0 | | 2384218 | 70918 | None | Item code-5.10.2 | Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. - Above 63 A to 200 A ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 400.05 | 400.05 | 24.0 | False | None | None | False | None | False | 9601.2 | 0 | | 2384219 | 70918 | None | Item code-5.42.2 | Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sq CM | 0.45 | 0.45 | 108000.0 | False | None | None | False | None | False | 48600.0 | 0 | | 2384220 | 70918 | None | Item code-5.40.1 | Supplying 100 amps rated 4x30x6mm Alluminium Strips 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing MDB. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete - 100 A 4 x 30 x 6 mm Aluminium Strips ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 2588.25 | 2588.25 | 24.0 | False | None | None | False | None | False | 62118.0 | 0 | | 2384221 | 70918 | None | Item code-3.9 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F screws. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sq CM | 0.36 | 0.36 | 27000.0 | False | None | None | False | None | False | 9720.0 | 0 | | 2384222 | 70918 | None | Item code-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 540.75 | 540.75 | 18.0 | False | None | None | False | None | False | 9733.5 | 0 | | 2384223 | 70918 | None | Item code-5.31 | Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 4609.5 | 4609.5 | 7.0 | False | None | None | False | None | False | 32266.5 | 0 | | 2384224 | 70918 | None | Item code-5.3 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. Separate RR NO ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1449.0 | 1449.0 | 13.0 | False | None | None | False | None | False | 18837.0 | 0 | | 2384225 | 70918 | None | Item code-5.21 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9717.75 | 9717.75 | 6.0 | False | None | None | False | None | False | 58306.5 | 0 | | 2384226 | 70918 | None | Item code-5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. - 100A, 25kA, 4 Pole ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 8911.35 | 8911.35 | 6.0 | False | None | None | False | None | False | 53468.1 | 0 | | 2384227 | 70918 | None | Item code-5.16 | Supplying and fixing of Shunt trip suitable for MCCB.CBCT ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1788.15 | 1788.15 | 6.0 | False | None | None | False | None | False | 10728.9 | 0 | | 2384228 | 70918 | None | Item code-5.34 | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 590.1 | 590.1 | 15.0 | False | None | None | False | None | False | 8851.5 | 0 | | 2384229 | 70918 | None | Item code-5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 63Amps TPN ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3242.4 | 3242.4 | 23.0 | False | None | None | False | None | False | 74575.2 | 0 | | 2384230 | 70918 | None | Item code-5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 6 - 32Amps DP ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 775.95 | 775.95 | 31.0 | False | None | None | False | None | False | 24054.45 | 0 | | 2384231 | 70918 | None | Item code-5.19.13 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. III- Double Door 12way TP & N ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9171.75 | 9171.75 | 12.0 | False | None | None | False | None | False | 110061.0 | 0 | | 2384232 | 70918 | None | Item code-5.19.10 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. III- Double Door 16way SP & N ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3053.4 | 3053.4 | 13.0 | False | None | None | False | None | False | 39694.2 | 0 | | 2384233 | 70918 | None | Item code-5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. 50-63Amps TPN ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3242.4 | 3242.4 | 3.0 | False | None | None | False | None | False | 9727.2 | 0 | | 2384234 | 70918 | None | Item code-5.18.7 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 5-32Amps TPN ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1802.85 | 1802.85 | 9.0 | False | None | None | False | None | False | 16225.65 | 0 | | 2384235 | 70918 | None | Item code-5.20.10 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.
- 63 A 4 pole ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5404.35 | 5404.35 | 5.0 | False | None | None | False | None | False | 27021.75 | 0 | | 2384236 | 70918 | None | Item code-5.20.4 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.
- 32 to 40 Amps 2 pole ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 4786.95 | 4786.95 | 40.0 | False | None | None | False | None | False | 191478.0 | 0 | | 2384237 | 70918 | None | Item code-5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 5-32Amps SP ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 435.75 | 435.75 | 444.0 | False | None | None | False | None | False | 193473.0 | 0 | | 2384238 | 70918 | None | Item code-12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 3685.5 | 3685.5 | 12.0 | False | None | None | False | None | False | 44226.0 | 0 | | 2384239 | 70918 | None | Item code-32.18 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5 core 240sqmm (2Runs) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 905.79 | 905.79 | 100.0 | False | None | None | False | None | False | 90579.0 | 0 | | 2384240 | 70918 | None | Item code-32.13 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5 core 70sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 333.8 | 333.8 | 670.0 | False | None | None | False | None | False | 223646.0 | 0 | | 2384241 | 70918 | None | Item code-32.07 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5core 25sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 146.52 | 146.52 | 60.0 | False | None | None | False | None | False | 8791.2 | 0 | | 2384242 | 70918 | None | Item code-32.03 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4core 10sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 123.9 | 123.9 | 40.0 | False | None | None | False | None | False | 4956.0 | 0 | | 2384243 | 70918 | None | Item code-21.05 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 2.5 sqmm to 25 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 21.93 | 21.93 | 40.0 | False | None | None | False | None | False | 877.2 | 0 | | 2384244 | 70918 | None | Item code-21.06 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 35 sqmm to 95 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 32.69 | 32.69 | 670.0 | False | None | None | False | None | False | 21902.3 | 0 | | 2384245 | 70918 | None | Item code-21.07 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 120 to 240 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 33.89 | 33.89 | 100.0 | False | None | None | False | None | False | 3389.0 | 0 | | 2384246 | 70918 | None | Item code-1.6.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 508.2 | 508.2 | 54.0 | False | None | None | False | None | False | 27442.8 | 0 | | 2384247 | 70918 | None | Item code-11.2.6 | Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Medium Duty GI pipe of 50mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 613.2 | 613.2 | 60.0 | False | None | None | False | None | False | 36792.0 | 0 | | 2384248 | 70918 | None | Item code-30.12 | Supplying and fixing of class B (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class - 100 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 1417.5 | 1417.5 | 200.0 | False | None | None | False | None | False | 283500.0 | 0 | | 2384249 | 70918 | None | Item code-35.04 | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 3.5 x 225/240/300 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 617.4 | 617.4 | 2.0 | False | None | None | False | None | False | 1234.8 | 0 | | 2384250 | 70918 | None | Item code-35.02 | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 3.5 x 70/95/120 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 401.1 | 401.1 | 12.0 | False | None | None | False | None | False | 4813.2 | 0 | | 2384251 | 70918 | None | Item code-35.01 | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - Up to 4C x 50 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 340.2 | 340.2 | 14.0 | False | None | None | False | None | False | 4762.8 | 0 | | 2384252 | 70918 | None | Item code-59.1 | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 240 Sqmm Copper Terminal, Apprx Wt: 218 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 372.75 | 372.75 | 12.0 | False | None | None | False | None | False | 4473.0 | 0 | | 2384253 | 70918 | None | Item code-59.06 | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 147.0 | 147.0 | 6.0 | False | None | None | False | None | False | 882.0 | 0 | | 2384254 | 70918 | None | Item code-59.04 | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 93.45 | 93.45 | 36.0 | False | None | None | False | None | False | 3364.2 | 0 | | 2384255 | 70918 | None | Item code-59.02 | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 35 Sqmm Copper Terminal, Apprx Wt: 17 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 42.0 | 42.0 | 12.0 | False | None | None | False | None | False | 504.0 | 0 | | 2384256 | 70918 | None | Item code-59.01 | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 28.35 | 28.35 | 48.0 | False | None | None | False | None | False | 1360.8 | 0 | | 2384257 | 70918 | None | Item code-60.12 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 240 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 64.05 | 64.05 | 12.0 | False | None | None | False | None | False | 768.6 | 0 | | 2384258 | 70918 | None | Item code-60.08 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 120 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 21.0 | 21.0 | 6.0 | False | None | None | False | None | False | 126.0 | 0 | | 2384259 | 70918 | None | Item code-60.06 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 70 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 13.65 | 13.65 | 36.0 | False | None | None | False | None | False | 491.4 | 0 | | 2384260 | 70918 | None | Item code-60.04 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 35 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 4.2 | 4.2 | 12.0 | False | None | None | False | None | False | 50.4 | 0 | | 2384261 | 70918 | None | Item code-60.03 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3.15 | 3.15 | 36.0 | False | None | None | False | None | False | 113.4 | 0 | | 2384262 | 70918 | None | Item code-60.02 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 16 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2.1 | 2.1 | 12.0 | False | None | None | False | None | False | 25.2 | 0 | | 2384263 | 70918 | None | Item code-60.01 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 10 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2.1 | 2.1 | 8.0 | False | None | None | False | None | False | 16.8 | 0 | | 2384264 | 70918 | None | Item code-63.01 | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 82.95 | 82.95 | 14.0 | False | None | None | False | None | False | 1161.3 | 0 | | 2384265 | 70918 | None | Item code-63.03 | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 40mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 155.4 | 155.4 | 12.0 | False | None | None | False | None | False | 1864.8 | 0 | | 2384266 | 70918 | None | Item code-63.04 | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 45mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 206.85 | 206.85 | 4.0 | False | None | None | False | None | False | 827.4 | 0 | | 2384267 | 70918 | None | Item code-12.58.5 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 50 x 6 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 228.9 | 228.9 | 150.0 | False | None | None | False | None | False | 34335.0 | 0 | | 2384268 | 70918 | None | Item code-12.58.3 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 25x6mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 134.4 | 134.4 | 400.0 | False | None | None | False | None | False | 53760.0 | 0 | | 2384269 | 70918 | None | Item code-19.3 | Supplying and fixing of DANGER / CAUTION board ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 333.9 | 333.9 | 6.0 | False | None | None | False | None | False | 2003.4 | 0 | | 2384270 | 70918 | None | Item code-5.37 | Suplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/400 volts grade, for power factor improvement of roating machinery. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kvar | 504.0 | 504.0 | 27.0 | False | None | None | False | None | False | 13608.0 | 0 | | 2384271 | 70918 | None | Item code-5.3 | Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20HP capacities. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 949.22 | 949.22 | 3.0 | False | None | None | False | None | False | 2847.66 | 0 | | 2384272 | 70918 | None | Item code-5.6.6 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. - 20"x20"x2.5" ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 342.43 | 342.43 | 2.0 | False | None | None | False | None | False | 684.86 | 0 | | 2384273 | 70918 | None | Item code-5.1 | Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 400/440 volts 3 phase motor/single phase motor upto 5 Hp. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2023.35 | 2023.35 | 6.0 | False | None | None | False | None | False | 12140.1 | 0 | | 2384274 | 70918 | None | Item code-15.117 | Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1995.0 | 1995.0 | 23.0 | False | None | None | False | None | False | 45885.0 | 0 |
| | 1706791961000 | 0 | None | None | Buildings | SAMBRANI-SUBSTATION | 1592160.81 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384275 | 70919 | None | ITEM CODE-48.08 | GI Pipe B - Class as per IS-1239 - GI Pipe - 100 mm Dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 1359.75 | 1359.75 | 50.0 | False | None | None | False | None | False | 67987.5 | 0 | | 2384276 | 70919 | None | ITEM CODE-1.17.1 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 203.7 | 203.7 | 51.12 | False | None | None | False | None | False | 10413.144 | 0 | | 2384277 | 70919 | None | ITEM CODE-45.04 | 11 kV, Jointing & Cable Termination Kit as per IS-13573 - Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable - 3x95 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kit | 3931.2 | 3931.2 | 2.0 | False | None | None | False | None | False | 7862.4 | 0 | | 2384278 | 70919 | None | ITEM CODE-45.07 | 11 kV, Jointing & Cable Termination Kit as per IS-13573 - Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable - 3x95 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kit | 4270.35 | 4270.35 | 2.0 | False | None | None | False | None | False | 8540.7 | 0 | | 2384279 | 70919 | None | ITEM CODE-52.01 | Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Coil | 542.85 | 542.85 | 1.0 | False | None | None | False | None | False | 542.85 | 0 | | 2384280 | 70919 | None | ITEM CODE-18.01 | LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)(Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 23820.3 | 23820.3 | 2.0 | False | None | None | False | None | False | 47640.6 | 0 | | 2384281 | 70919 | None | ITEM CODE-9.07 | Fixing LT Distribution box for 100/250/500 kVA DTC ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 404.25 | 404.25 | 1.0 | False | None | None | False | None | False | 404.25 | 0 | | 2384282 | 70919 | None | ITEM CODE-36.01 | 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 - 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Km | 934149.3 | 934149.3 | 0.14 | False | None | None | False | None | False | 130780.902 | 0 | | 2384283 | 70919 | None | ITEM CODE-21.01 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - HT Cable - 3x95 to 150 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Km | 64388.1 | 64388.1 | 0.14 | False | None | None | False | None | False | 9014.334 | 0 | | 2384284 | 70919 | None | ITEM CODE-45.04 | 11 kV, Jointing & Cable Termination Kit as per IS-13573 - Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable - 3x95 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kit | 3931.2 | 3931.2 | 6.0 | False | None | None | False | None | False | 23587.2 | 0 | | 2384285 | 70919 | None | ITEM CODE-21.2.3 | Disc Insulator 90 kN ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 622.65 | 622.65 | 6.0 | False | None | None | False | None | False | 3735.9 | 0 | | 2384286 | 70919 | None | ITEM CODE-12.57 | Supplyingfixingandwiringearthelectrodeforgroundingoflifts,transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopoftheearthelectrode.ThefunnelshouldbeenclosedinaCCchamberof400x400x400mmwithacastironcover.Theearthelectrodeshallhavestaggeredholesof12mmdiaandtheelectrodeshouldbecovered150mmall-roundwithalternatelayersofsaltandcharcoalfromthebottomoftheCCchamber.Theconnectionfromtheelectrode is to be established through GI strip using GI bolts and nuts. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 4468.8 | 4468.8 | 18.0 | False | None | None | False | None | False | 80438.4 | 0 | | 2384287 | 70919 | None | ITEM CODE-12.06 | Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 - 100 kVA, Aluminium Wdg, Star 2 (5 Star) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 233049.6 | 233049.6 | 1.0 | False | None | None | False | None | False | 233049.6 | 0 | | 2384288 | 70919 | None | ITEM CODE-59.05 | Heavy Duty Copper Terminal Long Barrel - 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 135.45 | 135.45 | 44.0 | False | None | None | False | None | False | 5959.8 | 0 | | 2384289 | 70919 | None | ITEM CODE-21.07 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable - 120 to 240 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Km | 33891.9 | 33891.9 | 0.31 | False | None | None | False | None | False | 10506.489 | 0 | | 2384290 | 70919 | None | ITEM CODE-32.15 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Km | 479733.45 | 479733.45 | 0.18 | False | None | None | False | None | False | 86352.021 | 0 | | 2384291 | 70919 | None | ITEM CODE-12.58.2 | GI/Copperstripsforgroundingconnections,usingnecessaryfixingmaterials as required.- 25 x 3 mm GI strip ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 86.1 | 86.1 | 192.5 | False | None | None | False | None | False | 16574.25 | 0 | | 2384292 | 70919 | None | ITEM CODE-22.09 | Prefabricated Platform for erection of 250 kVA Transformer on 11 Mtr Spun Pole Structure involving Rectangular hollow Sections 96x48x4.87 Thk and 66x3x4.5 Thk, Circular hollow section of 165.6 OD x 10 Thk , MS Stiffner plate 12 mm Thk, MS plate Base Plate 16 mm Thk, J Blots 12 mm dia, Gusset Plates, Clamps,15 mm rods 2.5 Mtr length as per drawing details. Tor Steel Rods cut of Dia 8 mm,10 mm,12 mm,16 mm and 20 mm bent as per drawing & tied inclusive of labour for Reinforced foundation(Dwg No. BESCOM/GM/QS&S/70 Dtd 24.11.2018) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 55773.9 | 55773.9 | 5.0 | False | None | None | False | None | False | 278869.5 | 0 | | 2384293 | 70919 | None | ITEM CODE-11.58 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin-charge. (Made of G.I. wire of dia 4 mm) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 843.15 | 843.15 | 80.0 | False | None | None | False | None | False | 67452.0 | 0 | | 2384294 | 70919 | None | ITEM CODE-11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 142.8 | 142.8 | 300.0 | False | None | None | False | None | False | 42840.0 | 0 | | 2384295 | 70919 | None | ITEM CODE-15.3 | Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 2A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with installation system with Superior quality EPDM Rubber Hosepipe etc., including cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall, , labour, usage charges of machinery complete as per specifications. complete IS 15683, CE Approved. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2782.5 | 2782.5 | 1.0 | False | None | None | False | None | False | 2782.5 | 0 | | 2384296 | 70919 | None | ITEM CODE-15.111 | Supplying of four bucket stand alongwith buckets. Complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1942.5 | 1942.5 | 1.0 | False | None | None | False | None | False | 1942.5 | 0 | | 2384297 | 70919 | None | ITEM CODE-15.113 | Supplying of Hand gloves. Complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Pair | 1023.75 | 1023.75 | 1.0 | False | None | None | False | None | False | 1023.75 | 0 | | 2384298 | 70919 | None | ITEM CODE-15.116 | Supplying of First Aid Chart with Lamination. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 420.0 | 420.0 | 1.0 | False | None | None | False | None | False | 420.0 | 0 | | 2384299 | 70919 | None | ITEM CODE-35.5 | Hickery rods ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 5668.95 | 5668.95 | 3.0 | False | None | None | False | None | False | 17006.85 | 0 | | 2384300 | 70919 | None | ITEM CODE-35.51 | Grounding sticks extendable upto 18 ft : 3 nos. of
each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 1842.75 | 1842.75 | 1.0 | False | None | None | False | None | False | 1842.75 | 0 | | 2384301 | 70919 | None | ITEM CODE-15.114 | Supplying of first aid box. Complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 630.0 | 630.0 | 1.0 | False | None | None | False | None | False | 630.0 | 0 | | 2384302 | 70919 | None | ITEM CODE-68.17 | Supplying and fixing of DANGER/NO ADMISSION/NO SMOKING board made out of MS sheet metal with two coats of non corrosive enameled paint. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 157.5 | 157.5 | 6.0 | False | None | None | False | None | False | 945.0 | 0 | | 2384303 | 70919 | None | ITEM CODE-68.17 | Caution/Danger Board ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 157.5 | 157.5 | 1.0 | False | None | None | False | None | False | 157.5 | 0 | | 2384304 | 70919 | None | ITEM CODE-5.15 | Fixing Danger Board ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 84.0 | 84.0 | 7.0 | False | None | None | False | None | False | 588.0 | 0 | | 2384305 | 70919 | None | ITEM CODE-5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6708.45 | 6708.45 | 3.14 | False | None | None | False | None | False | 21064.533 | 0 | | 2384306 | 70919 | None | ITEM CODE-5.6 | Providing and constructing laterite size stone masonry including cost
and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for
saturated dry samples - For Basement in CM 1:6 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6770.4 | 6770.4 | 2.51 | False | None | None | False | None | False | 16993.704 | 0 | | 2384307 | 70919 | None | ITEM CODE-1.23 | Providing and Filling in foundation with granite / trap broken metal 100mm. and
down size & with approved sand including hand packing, ramming, watering,
including cost of all materials and labour with all lead and lift complete as per
specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2816.1 | 2816.1 | 8.0 | False | None | None | False | None | False | 22528.8 | 0 | | 2384308 | 70919 | None | ITEM CODE-49.07 | 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 PVC Wire - 120 SqmmAl Wt: 32 Kg, Total Wt: 45.5Kg/100 Mtr Coil ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Coil | 15034.95 | 15034.95 | 0.5 | False | None | None | False | None | False | 7517.475 | 0 | | 2384309 | 70919 | None | ITEM CODE-43.2.9 | Quad Rigid Spacer ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 1943.55 | 1943.55 | 8.0 | False | None | None | False | None | False | 15548.4 | 0 | | 2384310 | 70919 | None | ITEM CODE-5.15 | GI Fish Plate ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 93.45 | 93.45 | 2.0 | False | None | None | False | None | False | 186.9 | 0 | | 2384311 | 70919 | None | ITEM CODE-58.02 | LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 83876.1 | 83876.1 | 1.0 | False | None | None | False | None | False | 83876.1 | 0 | | 2384312 | 70919 | None | ITEM CODE-9.02 | Erection of LT metering Cubicle on Platform. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 1741.95 | 1741.95 | 1.0 | False | None | None | False | None | False | 1741.95 | 0 | | 2384313 | 70919 | None | ITEM CODE-53.01 | CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL (Used for HT Installation, LT Metering Cubicle 50-150 KW) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 20595.75 | 20595.75 | 1.0 | False | None | None | False | None | False | 20595.75 | 0 | | 2384314 | 70919 | None | ITEM CODE-11.02 | Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC - 100 kVA TC ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 2043.3 | 2043.3 | 1.0 | False | None | None | False | None | False | 2043.3 | 0 | | 2384315 | 70919 | None | ITEM CODE-41.01 | Load Break Switch with Panel ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 76900.95 | 76900.95 | 1.0 | False | None | None | False | None | False | 76900.95 | 0 | | 2384316 | 70919 | None | ITEM CODE-68.08 | Route & Joint indicating slab with MS Anchor rod ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 139.65 | 139.65 | 5.0 | False | None | None | False | None | False | 698.25 | 0 | | 2384317 | 70919 | None | ITEM CODE-68.07 | Cable Covering Tile 125x125x40 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5383.35 | 5383.35 | 0.5 | False | None | None | False | None | False | 2691.675 | 0 | | 2384318 | 70919 | None | ITEM CODE-59.06 | Heavy Duty Copper Terminal Long Barrel 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm. Copper Lugs - 120sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 147.0 | 147.0 | 12.0 | False | None | None | False | None | False | 1764.0 | 0 | | 2384319 | 70919 | None | ITEM CODE-9.02 | PG Clamp - Rabbit to 120 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 107.1 | 107.1 | 4.0 | False | None | None | False | None | False | 428.4 | 0 | | 2384320 | 70919 | None | ITEM CODE-59.05 | Heavy Duty Copper Terminal Long Barrel 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm Copper Lugs - 95sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 135.45 | 135.45 | 12.0 | False | None | None | False | None | False | 1625.4 | 0 | | 2384321 | 70919 | None | ITEM CODE-30.02 | LT Feeder Pillar - 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar asper IS-13947 Part-1&2(Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 65670.15 | 65670.15 | 1.0 | False | None | None | False | None | False | 65670.15 | 0 | | 2384322 | 70919 | None | ITEM CODE-21.08 | Supply and erection of Double Pole TC structural set including all hardwares suitable for 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 32228.7 | 32228.7 | 1.0 | False | None | None | False | None | False | 32228.7 | 0 | | 2384323 | 70919 | None | ITEM CODE-24.07 | Supplying and Fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6374.55 | 6374.55 | 1.0 | False | None | None | False | None | False | 6374.55 | 0 | | 2384324 | 70919 | None | ITEM CODE-2.12 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - HT ST Support 50x8 mm Flat - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 127.05 | 127.05 | 4.0 | False | None | None | False | None | False | 508.2 | 0 | | 2384325 | 70919 | None | ITEM CODE-2.02 | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 511.35 | 511.35 | 2.0 | False | None | None | False | None | False | 1022.7 | 0 | | 2384326 | 70919 | None | ITEM CODE-24.01 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, 200 Amps Single Break GOS ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9922.5 | 9922.5 | 1.0 | False | None | None | False | None | False | 9922.5 | 0 | | 2384327 | 70919 | None | ITEM CODE-20.01 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1122.45 | 1122.45 | 1.0 | False | None | None | False | None | False | 1122.45 | 0 | | 2384328 | 70919 | None | ITEM CODE-19.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification of BESCOM. - 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1663.2 | 1663.2 | 1.0 | False | None | None | False | None | False | 1663.2 | 0 | | 2384329 | 70919 | None | ITEM CODE-1.02 | Supply and erection of 9 Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM.. RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 8731.8 | 8731.8 | 2.0 | False | None | None | False | None | False | 17463.6 | 0 | | 2384330 | 70919 | None | ITEM CODE-5.10,5.11,5.13,5.15, 5.16 & 8.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1709.87 | 1709.87 | 2.0 | False | None | None | False | None | False | 3419.74 | 0 | | 2384331 | 70919 | None | ITEM CODE-25.02 | Supplying and fixing of 11 kV, DOLO Cutout REC Specification(Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018) on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 4453.05 | 4453.05 | 3.0 | False | None | None | False | None | False | 13359.15 | 0 | | 2384332 | 70919 | None | ITEM CODE-63.04 | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 45mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 206.85 | 206.85 | 16.0 | False | None | None | False | None | False | 3309.6 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-11 KV LINE | 719245.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384333 | 70920 | None | Itemcode-21.08 | Supply and erection of Double Pole TC structural set including all hardwares suitable for 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 32228.7 | 32228.7 | 1.0 | False | None | None | False | None | False | 32228.7 | 0 | | 2384334 | 70920 | None | Itemcode-24.07 | Supplying and Fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6374.55 | 6374.55 | 1.0 | False | None | None | False | None | False | 6374.55 | 0 | | 2384335 | 70920 | None | Itemcode-24.01 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, 200 Amps Single Break GOS ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9922.5 | 9922.5 | 1.0 | False | None | None | False | None | False | 9922.5 | 0 | | 2384336 | 70920 | None | Itemcode-20.01 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1122.45 | 1122.45 | 1.0 | False | None | None | False | None | False | 1122.45 | 0 | | 2384337 | 70920 | None | Itemcode-19.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification of BESCOM. - 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1663.2 | 1663.2 | 1.0 | False | None | None | False | None | False | 1663.2 | 0 | | 2384338 | 70920 | None | Itemcode-1.02 | Supply and erection of 9 Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM.. RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 8731.8 | 8731.8 | 33.0 | False | None | None | False | None | False | 288149.4 | 0 | | 2384339 | 70920 | None | Itemcode-2.02 | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 511.35 | 511.35 | 33.0 | False | None | None | False | None | False | 16874.55 | 0 | | 2384340 | 70920 | None | Itemcode-2.12 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - HT ST Support 50x8 mm Flat - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 127.05 | 127.05 | 33.0 | False | None | None | False | None | False | 4192.65 | 0 | | 2384341 | 70920 | None | Itemcode-2.04 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, Special 3 Pin Cross Arm - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1208.55 | 1208.55 | 4.0 | False | None | None | False | None | False | 4834.2 | 0 | | 2384342 | 70920 | None | Itemcode-5.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification - RCC Pole Clamp - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 114.45 | 114.45 | 33.0 | False | None | None | False | None | False | 3776.85 | 0 | | 2384343 | 70920 | None | Itemcode-9.03 | Supplying and fixing of P.G Clamp inluding all Hardware's etc. complete as per the standard technical specification of BESCOM ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 90.3 | 90.3 | 33.0 | False | None | None | False | None | False | 2979.9 | 0 | | 2384344 | 70920 | None | Itemcode-5.16 | Supplying and Fixing Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator including all Hardwares etc complete as per the standard technical specification of BESCOM ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 742.35 | 742.35 | 18.0 | False | None | None | False | None | False | 13362.3 | 0 | | 2384345 | 70920 | None | Itemcode-6.06 | Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 215.25 | 215.25 | 90.0 | False | None | None | False | None | False | 19372.5 | 0 | | 2384346 | 70920 | None | Itemcode-5.10,5.11,5.13,5.15, 5.16 & 8.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1709.87 | 1709.87 | 10.0 | False | None | None | False | None | False | 17098.7 | 0 | | 2384347 | 70920 | None | Itemcode-2.16 | Providing Spiral Earth Electrode type earthing (without
charcoal, salt etc.,) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 97.65 | 97.65 | 33.0 | False | None | None | False | None | False | 3222.45 | 0 | | 2384348 | 70920 | None | Itemcode-2.06 | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - LT 4 Pin Cross Arm - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 397.95 | 397.95 | 4.0 | False | None | None | False | None | False | 1591.8 | 0 | | 2384349 | 70920 | None | Itemcode-7.02 | Supplying and fixing of Rabbit ACSR
(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 48.54 | 48.54 | 6000.0 | False | None | None | False | None | False | 291240.0 | 0 | | 2384350 | 70920 | None | Itemcode-6.08 | Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification BESCOM - No. 15 Strain Insulator ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 61.95 | 61.95 | 20.0 | False | None | None | False | None | False | 1239.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-LT LINE | 747301.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384351 | 70921 | None | Item code-1.03 | Supply of 8Mtr RCC Pole including earth work etc,. complete as per the standard technical specification BESCOM - b) 8Mtr 115Kg WL ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5385.45 | 5385.45 | 25.0 | False | None | None | False | None | False | 134636.25 | 0 | | 2384352 | 70921 | None | Item code-2.01 | Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5
Mtr depth ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 968.1 | 968.1 | 25.0 | False | None | None | False | None | False | 24202.5 | 0 | | 2384353 | 70921 | None | Item code-2.06 | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - LT 4 Pin Cross Arm - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 397.95 | 397.95 | 25.0 | False | None | None | False | None | False | 9948.75 | 0 | | 2384354 | 70921 | None | Item code-2.08 | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM. b)
2 Pin GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 181.65 | 181.65 | 25.0 | False | None | None | False | None | False | 4541.25 | 0 | | 2384355 | 70921 | None | Item code-5.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification - RCC Pole Clamp - GI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 114.45 | 114.45 | 50.0 | False | None | None | False | None | False | 5722.5 | 0 | | 2384356 | 70921 | None | Item code-5.10,5.11,5.13,5.15, 5.16 & 8.02 | Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1709.87 | 1709.87 | 10.0 | False | None | None | False | None | False | 17098.7 | 0 | | 2384357 | 70921 | None | Item code-6.05 | Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification. 1.1 kV Polymeric Pin Insulator ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 91.35 | 91.35 | 100.0 | False | None | None | False | None | False | 9135.0 | 0 | | 2384358 | 70921 | None | Item code-6.07 | Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification BESCOM - No. 8 Strain Insulator ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 28.35 | 28.35 | 30.0 | False | None | None | False | None | False | 850.5 | 0 | | 2384359 | 70921 | None | Item code-42.08 | 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995
3x16 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 114.2 | 114.2 | 1650.0 | False | None | None | False | None | False | 188430.0 | 0 | | 2384360 | 70921 | None | Item code-2.16 | Providing Spiral Earth Electrode type earthing (without
charcoal, salt etc.,) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 97.65 | 97.65 | 25.0 | False | None | None | False | None | False | 2441.25 | 0 | | 2384361 | 70921 | None | Item code-1.1.2 | Open Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 85.05 | 85.05 | 250.0 | False | None | None | False | None | False | 21262.5 | 0 | | 2384362 | 70921 | None | Item code-2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 4 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 66.15 | 66.15 | 750.0 | False | None | None | False | None | False | 49612.5 | 0 | | 2384363 | 70921 | None | Item code-11.8.3 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. - LED Streetlight 70W ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6291.6 | 6291.6 | 25.0 | False | None | None | False | None | False | 157290.0 | 0 | | 2384364 | 70921 | None | Item code-32.03 | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4core 10sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 123.9 | 123.9 | 750.0 | False | None | None | False | None | False | 92925.0 | 0 | | 2384365 | 70921 | None | Item code-21.05 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 2.5 sqmm to 25 sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 21.93 | 21.93 | 750.0 | False | None | None | False | None | False | 16447.5 | 0 | | 2384366 | 70921 | None | Item code-35.01 | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - Up to 4C x 50 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 340.2 | 340.2 | 25.0 | False | None | None | False | None | False | 8505.0 | 0 | | 2384367 | 70921 | None | Item code-60.01 | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 10 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2.1 | 2.1 | 50.0 | False | None | None | False | None | False | 105.0 | 0 | | 2384368 | 70921 | None | Item code-63.01 | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 82.95 | 82.95 | 50.0 | False | None | None | False | None | False | 4147.5 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-RO | 1308000.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384369 | 70922 | None | 21.1.7 | Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components. For 500 LPH SS : Skid Type
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 327000.0 | 327000.0 | 4.0 | False | None | None | False | None | False | 1308000.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-SOLAR WATER | 935200.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384370 | 70923 | None | ITEM CODE-7.3.2 | Supplying, installation ,testing and commissioning of solar hot water heater comprising of solar flat plate collector of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with approximate capacity electrical back up arrangement excluding inlet and out let pipes. As per the directions SS Model with 100mm thick of 48kg/Meter cube density Rock wool insulation with 22SWG Aluminium cladding for 200 liter capacity. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 46914.0 | 46914.0 | 8.0 | False | None | None | False | None | False | 375312.0 | 0 | | 2384371 | 70923 | None | ITEM CODE-7.3.3 | Supplying, installation ,testing and commissioning of solar hot water heater comprising of solar flat plate collector of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with approximate capacity electrical back up arrangement excluding inlet and out let pipes. As per the directions SS Model with 100mm thick of 48kg/Meter cube density Rock wool insulation with 22SWG Aluminium cladding for 300 liter capacity. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 69986.0 | 69986.0 | 8.0 | False | None | None | False | None | False | 559888.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-WASH AREA | 865895.38 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384372 | 70924 | None | ITEM CODE-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 76.65 | 76.65 | 92.78 | False | None | None | False | None | False | 7111.587 | 0 | | 2384373 | 70924 | None | ITEM CODE-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6039.6 | 6039.6 | 20.94 | False | None | None | False | None | False | 126469.224 | 0 | | 2384374 | 70924 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6222.3 | 6222.3 | 14.33 | False | None | None | False | None | False | 89165.559 | 0 | | 2384375 | 70924 | None | ITEM CODE-5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 5065.2 | 5065.2 | 15.22 | False | None | None | False | None | False | 77092.344 | 0 | | 2384376 | 70924 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1321.0 | 1321.0 | 44.21 | False | None | None | False | None | False | 58401.41 | 0 | | 2384377 | 70924 | None | ITEM CODE-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 292.95 | 292.95 | 263.48 | False | None | None | False | None | False | 77186.466 | 0 | | 2384378 | 70924 | None | ITEM CODE-9.23 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1993.95 | 1993.95 | 12.96 | False | None | None | False | None | False | 25841.592 | 0 | | 2384379 | 70924 | None | ITEM CODE-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 214.2 | 214.2 | 8.21 | False | None | None | False | None | False | 1758.582 | 0 | | 2384380 | 70924 | None | ITEM CODE-11.2 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 118.65 | 118.65 | 1870.8 | False | None | None | False | None | False | 221970.42 | 0 | | 2384381 | 70924 | None | ITEM CODE-7.1.1 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 922.95 | 922.95 | 196.0 | False | None | None | False | None | False | 180898.2 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI- CONCRETE ROAD AND DRAIN | 5354833.85 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384382 | 70925 | None | Item code-2.5.A | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer. In area of light jungle ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 4.12 | 4.12 | 2100.0 | False | None | None | False | None | False | 8652.0 | 0 | | 2384383 | 70925 | None | Item code-1.4.1 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 195.3 | 195.3 | 302.4 | False | None | None | False | None | False | 59058.72 | 0 | | 2384384 | 70925 | None | Item code-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 68.25 | 68.25 | 819.0 | False | None | None | False | None | False | 55896.75 | 0 | | 2384385 | 70925 | None | Item code-4.17 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2686.95 | 2686.95 | 273.0 | False | None | None | False | None | False | 733537.35 | 0 | | 2384386 | 70925 | None | Item code-6.2.1 | Construction of M40 Grade un-reinforced, dowel jointed,
plain cement concrete pavement over a prepared sub base in
recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a slip form paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing OPC @ 420 kg/m3 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7112.7 | 7112.7 | 224.0 | False | None | None | False | None | False | 1593244.8 | 0 | | 2384387 | 70925 | None | Item code-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6288.45 | 6288.45 | 50.4 | False | None | None | False | None | False | 316937.88 | 0 | | 2384388 | 70925 | None | Item code-2.1.6 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6555.15 | 6555.15 | 50.4 | False | None | None | False | None | False | 330379.56 | 0 | | 2384389 | 70925 | None | Item code-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 784.0 | False | None | None | False | None | False | 1078392.0 | 0 | | 2384390 | 70925 | None | Item code-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 292.95 | 292.95 | 1456.0 | False | None | None | False | None | False | 426535.2 | 0 | | 2384391 | 70925 | None | Item code-2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10206.0 | 10206.0 | 14.0 | False | None | None | False | None | False | 142884.0 | 0 | | 2384392 | 70925 | None | Item code-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 1.68 | False | None | None | False | None | False | 157802.148 | 0 | | 2384393 | 70925 | None | Item code-1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 497.7 | 497.7 | 907.2 | False | None | None | False | None | False | 451513.44 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-COMPOUND WALL | 7365554.84 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384394 | 70926 | None | ITEM CODE-2.5.ii | Clearing and Grubbing Road Land.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (ii) By Mechanical Means using Dozer. In area of light jungle. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 4.12 | 4.12 | 1800.0 | False | None | None | False | None | False | 7416.0 | 0 | | 2384395 | 70926 | None | ITEM CODE-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 467.1 | False | None | None | False | None | False | 50026.41 | 0 | | 2384396 | 70926 | None | ITEM CODE-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6511.05 | 6511.05 | 61.56 | False | None | None | False | None | False | 400820.238 | 0 | | 2384397 | 70926 | None | ITEM CODE-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 279.3 | 279.3 | 321.15 | False | None | None | False | None | False | 89697.195 | 0 | | 2384398 | 70926 | None | ITEM CODE-2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Footings) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7185.02 | 7185.02 | 72.0 | False | None | None | False | None | False | 517321.44 | 0 | | 2384399 | 70926 | None | ITEM CODE-2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (COLUMN) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11363.31 | 11363.31 | 43.92 | False | None | None | False | None | False | 499076.5752 | 0 | | 2384400 | 70926 | None | ITEM CODE-2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PLINGTH BEAM). (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10206.0 | 10206.0 | 36.0 | False | None | None | False | None | False | 367416.0 | 0 | | 2384401 | 70926 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 16.4 | False | None | None | False | None | False | 1540449.54 | 0 | | 2384402 | 70926 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 1196.16 | False | None | None | False | None | False | 1645318.08 | 0 | | 2384403 | 70926 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. The rates are including formwork (Coping Concrete) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7180.63 | 7180.63 | 12.0 | False | None | None | False | None | False | 86167.56 | 0 | | 2384404 | 70926 | None | ITEM CODE-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 292.95 | 292.95 | 2949.36 | False | None | None | False | None | False | 864015.012 | 0 | | 2384405 | 70926 | None | ITEM CODE-8.16.4 | Providing 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): Moulded Band including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 8.4 | 8.4 | 1200.0 | False | None | None | False | None | False | 10080.0 | 0 | | 2384406 | 70926 | None | ITEM CODE-8.27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 55.65 | 55.65 | 2949.36 | False | None | None | False | None | False | 164131.884 | 0 | | 2384407 | 70926 | None | ITEM CODE-8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 182.7 | 182.7 | 2949.36 | False | None | None | False | None | False | 538848.072 | 0 | | 2384408 | 70926 | None | ITEM CODE-11.25.2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 142.8 | 142.8 | 3268.0 | False | None | None | False | None | False | 466670.4 | 0 | | 2384409 | 70926 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 132.84 | False | None | None | False | None | False | 16040.43 | 0 | | 2384410 | 70926 | None | ITEM CODE-11.57.1 | Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 18.9 | 18.9 | 5400.0 | False | None | None | False | None | False | 102060.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI -STAGE | 4447688.36 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384411 | 70927 | None | ITEM CODE-2.5.A | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer. In area of light jungle. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 4.12 | 4.12 | 170.0 | False | None | None | False | None | False | 700.4 | 0 | | 2384412 | 70927 | None | ITEM CODE-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 99.75 | 99.75 | 60.0 | False | None | None | False | None | False | 5985.0 | 0 | | 2384413 | 70927 | None | ITEM CODE-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface ofconsolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 123.9 | 123.9 | 240.0 | False | None | None | False | None | False | 29736.0 | 0 | | 2384414 | 70927 | None | ITEM CODE-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 283.0 | False | None | None | False | None | False | 30309.3 | 0 | | 2384415 | 70927 | None | ITEM CODE-1.15.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 381.15 | 381.15 | 15.0 | False | None | None | False | None | False | 5717.25 | 0 | | 2384416 | 70927 | None | ITEM CODE-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6511.05 | 6511.05 | 61.0 | False | None | None | False | None | False | 397174.05 | 0 | | 2384417 | 70927 | None | ITEM CODE-5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6288.45 | 6288.45 | 2.0 | False | None | None | False | None | False | 12576.9 | 0 | | 2384418 | 70927 | None | ITEM CODE-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 279.3 | 279.3 | 15.0 | False | None | None | False | None | False | 4189.5 | 0 | | 2384419 | 70927 | None | ITEM CODE-1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Deduct 5% per m if rollers are not used and tamping is done manually. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 472.81 | 472.81 | 348.08 | False | None | None | False | None | False | 164575.7048 | 0 | | 2384420 | 70927 | None | ITEM CODE-2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Footings) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7185.02 | 7185.02 | 22.23 | False | None | None | False | None | False | 159722.9946 | 0 | | 2384421 | 70927 | None | ITEM CODE-2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (COLUMN) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11309.76 | 11309.76 | 13.68 | False | None | None | False | None | False | 154717.5168 | 0 | | 2384422 | 70927 | None | ITEM CODE-2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PLINGTH BEAM). (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10206.0 | 10206.0 | 26.94 | False | None | None | False | None | False | 274949.64 | 0 | | 2384423 | 70927 | None | ITEM CODE-2.1.4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates. FLAGGING CONCRETE ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6527.85 | 6527.85 | 4.0 | False | None | None | False | None | False | 26111.4 | 0 | | 2384424 | 70927 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 5.89 | False | None | None | False | None | False | 553246.8165 | 0 | | 2384425 | 70927 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. COLULMNS (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 19399.9 | 19399.9 | 7.17 | False | None | None | False | None | False | 139097.283 | 0 | | 2384426 | 70927 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.LINTEL & ROOF BEAM (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11496.24 | 11496.24 | 9.06 | False | None | None | False | None | False | 104155.9344 | 0 | | 2384427 | 70927 | None | ITEM CODE-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ROOF SLAB (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10777.72 | 10777.72 | 9.78 | False | None | None | False | None | False | 105406.1016 | 0 | | 2384428 | 70927 | None | ITEM CODE-2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. CHEJJA (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10094.17 | 10094.17 | 0.36 | False | None | None | False | None | False | 3633.9012 | 0 | | 2384429 | 70927 | None | ITEM CODE-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (CILL CONCRETE) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6527.85 | 6527.85 | 0.23 | False | None | None | False | None | False | 1501.4055 | 0 | | 2384430 | 70927 | None | ITEM CODE-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 2.74 | False | None | None | False | None | False | 257367.789 | 0 | | 2384431 | 70927 | None | ITEM CODE-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 239.7 | False | None | None | False | None | False | 329707.35 | 0 | | 2384432 | 70927 | None | ITEM CODE-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1084.65 | 1084.65 | 40.95 | False | None | None | False | None | False | 44416.4175 | 0 | | 2384433 | 70927 | None | ITEM CODE-12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 103755.75 | 103755.75 | 0.25 | False | None | None | False | None | False | 25938.9375 | 0 | | 2384434 | 70927 | None | ITEM CODE-12.57.2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3667.65 | 3667.65 | 11.52 | False | None | None | False | None | False | 42251.328 | 0 | | 2384435 | 70927 | None | ITEM CODE-12.93.1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately). Size 62 x 100mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 737.1 | 737.1 | 53.0 | False | None | None | False | None | False | 39066.3 | 0 | | 2384436 | 70927 | None | ITEM CODE-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately). 30 mm thickness ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3659.25 | 3659.25 | 15.75 | False | None | None | False | None | False | 57633.1875 | 0 | | 2384437 | 70927 | None | ITEM CODE-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6004.95 | 6004.95 | 2.43 | False | None | None | False | None | False | 14592.0285 | 0 | | 2384438 | 70927 | None | ITEM CODE-12.9 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7070.7 | 7070.7 | 9.0 | False | None | None | False | None | False | 63636.3 | 0 | | 2384439 | 70927 | None | ITEM CODE-11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 176.4 | 176.4 | 189.0 | False | None | None | False | None | False | 33339.6 | 0 | | 2384440 | 70927 | None | ITEM CODE-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Internal Plastering) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 309.75 | 309.75 | 162.68 | False | None | None | False | None | False | 50390.13 | 0 | | 2384441 | 70927 | None | ITEM CODE-8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 389.55 | 389.55 | 241.03 | False | None | None | False | None | False | 93893.2365 | 0 | | 2384442 | 70927 | None | ITEM CODE-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Rough Plastering) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 306.6 | 306.6 | 104.55 | False | None | None | False | None | False | 32055.03 | 0 | | 2384443 | 70927 | None | ITEM CODE-8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 105.0 | 105.0 | 214.74 | False | None | None | False | None | False | 22547.7 | 0 | | 2384444 | 70927 | None | ITEM CODE-8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 115.5 | 115.5 | 214.74 | False | None | None | False | None | False | 24802.47 | 0 | | 2384445 | 70927 | None | ITEM CODE-8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 55.65 | 55.65 | 214.74 | False | None | None | False | None | False | 11950.281 | 0 | | 2384446 | 70927 | None | ITEM CODE-8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 182.7 | 182.7 | 242.0 | False | None | None | False | None | False | 44213.4 | 0 | | 2384447 | 70927 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 19.0 | False | None | None | False | None | False | 2294.25 | 0 | | 2384448 | 70927 | None | ITEM CODE-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 18.0 | False | None | None | False | None | False | 2173.5 | 0 | | 2384449 | 70927 | None | ITEM CODE-9.31 | Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 2189.25 | 2189.25 | 98.12 | False | None | None | False | None | False | 214809.21 | 0 | | 2384450 | 70927 | None | ITEM CODE-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 933.45 | 933.45 | 36.7 | False | None | None | False | None | False | 34257.615 | 0 | | 2384451 | 70927 | None | ITEM CODE-9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1521.45 | 1521.45 | 104.55 | False | None | None | False | None | False | 159067.5975 | 0 | | 2384452 | 70927 | None | ITEM CODE-8.16.2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 39.9 | 39.9 | 200.0 | False | None | None | False | None | False | 7980.0 | 0 | | 2384453 | 70927 | None | ITEM CODE-11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 593.25 | 593.25 | 27.0 | False | None | None | False | None | False | 16017.75 | 0 | | 2384454 | 70927 | None | ITEM CODE-15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 857.85 | 857.85 | 65.26 | False | None | None | False | None | False | 55983.291 | 0 | | 2384455 | 70927 | None | ITEM CODE-9.25 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 840.0 | 840.0 | 330.0 | False | None | None | False | None | False | 277200.0 | 0 | | 2384456 | 70927 | None | ITEM CODE-11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 142.8 | 142.8 | 1587.72 | False | None | None | False | None | False | 226726.416 | 0 | | 2384457 | 70927 | None | ITEM CODE-7.1.1 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 922.95 | 922.95 | 86.4 | False | None | None | False | None | False | 79742.88 | 0 | | 2384458 | 70927 | None | ITEM CODE-7.4.1 | Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings. 0.63 mm thick with zinc coating not less than 275 g/m² ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 670.95 | 670.95 | 5.0 | False | None | None | False | None | False | 3354.75 | 0 | | 2384459 | 70927 | None | ITEM CODE-7.6 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 677.25 | 677.25 | 10.0 | False | None | None | False | None | False | 6772.5 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI - ENTRANCE GATE | 777770.04 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384460 | 70928 | None | Item code-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 57.4 | False | None | None | False | None | False | 6147.54 | 0 | | 2384461 | 70928 | None | Item code-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 279.3 | 279.3 | 53.57 | False | None | None | False | None | False | 14962.101 | 0 | | 2384462 | 70928 | None | Item code-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface ofconsolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 123.9 | 123.9 | 10.24 | False | None | None | False | None | False | 1268.736 | 0 | | 2384463 | 70928 | None | Item code-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. . Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6511.05 | 6511.05 | 4.285 | False | None | None | False | None | False | 27899.84925 | 0 | | 2384464 | 70928 | None | Item code-2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Footings) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7185.02 | 7185.02 | 7.56 | False | None | None | False | None | False | 54318.7512 | 0 | | 2384465 | 70928 | None | Item code-2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (COLUMN) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11309.76 | 11309.76 | 4.09 | False | None | None | False | None | False | 46256.9184 | 0 | | 2384466 | 70928 | None | Item code-2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PLINGTH BEAM). (The cost of Formwork is included) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10206.0 | 10206.0 | 1.75 | False | None | None | False | None | False | 17860.5 | 0 | | 2384467 | 70928 | None | Item code-2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (LINTEL& ROOF BEAM) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11496.24 | 11496.24 | 10.05 | False | None | None | False | None | False | 115537.212 | 0 | | 2384468 | 70928 | None | Item code-2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (ROOF SLAB) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10777.72 | 10777.72 | 0.74 | False | None | None | False | None | False | 7975.5128 | 0 | | 2384469 | 70928 | None | Item code-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 1.28 | False | None | None | False | None | False | 120230.208 | 0 | | 2384470 | 70928 | None | Item code-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1375.5 | 1375.5 | 60.72 | False | None | None | False | None | False | 83520.36 | 0 | | 2384471 | 70928 | None | Item code-11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 176.4 | 176.4 | 85.05 | False | None | None | False | None | False | 15002.82 | 0 | | 2384472 | 70928 | None | Item code-12.9 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7070.7 | 7070.7 | 4.32 | False | None | None | False | None | False | 30545.424 | 0 | | 2384473 | 70928 | None | Item code-12.93.1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately). Size 62 x 100mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Rmtr | 737.1 | 737.1 | 5.5 | False | None | None | False | None | False | 4054.05 | 0 | | 2384474 | 70928 | None | Item code-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately). 30 mm thickness ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3659.25 | 3659.25 | 2.1 | False | None | None | False | None | False | 7684.425 | 0 | | 2384475 | 70928 | None | Item code-9.21.2 | Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1299.9 | 1299.9 | 8.0 | False | None | None | False | None | False | 10399.2 | 0 | | 2384476 | 70928 | None | Item code-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Internal Plastering) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 306.6 | 306.6 | 34.83 | False | None | None | False | None | False | 10678.878 | 0 | | 2384477 | 70928 | None | Item code-8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 389.55 | 389.55 | 154.35 | False | None | None | False | None | False | 60127.0425 | 0 | | 2384478 | 70928 | None | Item code-8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 115.5 | 115.5 | 42.33 | False | None | None | False | None | False | 4889.115 | 0 | | 2384479 | 70928 | None | Item code-8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 55.65 | 55.65 | 42.33 | False | None | None | False | None | False | 2355.6645 | 0 | | 2384480 | 70928 | None | Item code-8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and includingpriming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 182.7 | 182.7 | 154.35 | False | None | None | False | None | False | 28199.745 | 0 | | 2384481 | 70928 | None | Item code-8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 105.0 | 105.0 | 43.0 | False | None | None | False | None | False | 4515.0 | 0 | | 2384482 | 70928 | None | Item code-11.25.2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 142.8 | 142.8 | 700.0 | False | None | None | False | None | False | 99960.0 | 0 | | 2384483 | 70928 | None | Item code-8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 120.75 | 120.75 | 28.0 | False | None | None | False | None | False | 3381.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI-FURNITURE | 9884119.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384484 | 70929 | None | ITEM CODE-DR1 | Two tier cot to MDRS/KRCRS / P U MDRS Size: 1980L X 760W X 1980mmH. The verticals shall be made out of 38mm square MS tubes of 16G thick on all the four corners & 19mm square MS tubes in-between. A single CRCA sheet of 14G thick and uniformly bent on all sides vertically and further inside and with one lengthwise rib of 18G in the middle underneath for both the cots shall be provided. For the upper cot 25mm dia pipe to be bent and fixed in the middle on either sides as obstacle to avoid dropping of the person while sleeping to the side. The height for bottom tier from the floor shall be 460mm. The distance between bottom tier and top tier shall be 1000mm. The ladder shall be provided on one side to enable the person to climb to upper tier. Curtain hooks at the top corners for both the cots shall be welded for tying mosquito curtains. Strong rubber bushes shall be fixed for the verticals at the bottom. The entire cot shall be neatly de rusted, powder coated with epoxy polyesterpowder. Name of the institution i.e., KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 14950.0 | 14950.0 | 125.0 | False | None | None | False | None | False | 1868750.0 | 0 | | 2384485 | 70929 | None | ITEM CODE-DR2 | Desk cum Bench Dimensions: Size : 1800 (L) * 787 (W) * 787mm (H) Specification: Made using 25mm*25mm & 25mm*50mm 16g MS ERW tubular section frame & book shelf of 20 swg CRCA sheet, fitted with 25mm thick PLPB & 2mm thick PVC edge binding for all the exposed edges for sitting & writing planks & 18mm thick PLPB for back rest planks respectively. The desk frame shall be epoxy powder coated upto 40microns with siemens grey colour. Part Details:- 1) Writing Plank: Size: 1800 Mm(L) * 355mm(W)*25mm(T) 2) Sitting Plank: Size: 1800 Mm(L) * 305mm(W)*25mm(T) 3) Backrest Plank: Size: 1800 Mm(L) * 203mm(W)*18mm(T) 4) Book Shelve: Made Out Of MS 20swg. Name of the institution i.e, KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 12600.0 | 12600.0 | 62.0 | False | None | None | False | None | False | 781200.0 | 0 | | 2384486 | 70929 | None | ITEM CODE-DR3 | Steel Almirah plain with shelves &Door 6.6 Feet with 20 Guage doors & 22 Guage body. Size : 198cm H x 915cm W x 48cm D (including leg of 15.24cm) , fitted with four fixed shelves making five compartments with double door with three way locking device and duplicate keys, all joints outside and inside should be spot or co2 welded and neatly finished by sandering. The outside corners should be rounded off to give good appearance. The edges of doors and shelves should be properly bent to U shape of 25mm width to ensure good strength and the outer edge of U bent of the door length wise should be double folded and neatly finished. The shelves front side should be bent to U shape neatly and finished to avoid any possible cuts to fingers and hand when handled. Longitudinal rib of 15.24cm wide including bent to required shape should be provided and fixed to each door at its centre. The breadth of the shelf in the Almirah should be to the entire width leaving above 12mm gap from the shutter when it is closed. Locking Device: Three ways locking device with 10 Gauge M.S. sheet for locking and lever plate, and with locking rod of 10mm dia with strong bracket at top and bottom to hold the locking rod with six lever lock should be provided. 65mm size 6 lever strong lock to be fixed. Handle should be made out of cast alloy with nickel chrome plated. The entire almirah shall be derusted, powder coated with epoxy polyester powder Name of the institution i.e, KREIS should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 21823.0 | 21823.0 | 12.0 | False | None | None | False | None | False | 261876.0 | 0 | | 2384487 | 70929 | None | ITEM CODE-DR4 | S Type continuous armrest chair: SEAT/BACK ASSEMBLY: The seat and back are made from well seasoned& polished wood. CANE FOR SEAT/BACK: Cane is made from mix of LDPE+HDPE MIX material. The caning used for seat/back shall have high tensile strength. ARMREST TUBE: The armrest tube is made of MS ERW tube of dia.2.54cm x 16G thick and powder coated. The armrest is gas-assisted injection moulded from black polypropylene. Name of the institution i.e, KREIS should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 3492.0 | 3492.0 | 25.0 | False | None | None | False | None | False | 87300.0 | 0 | | 2384488 | 70929 | None | ITEM CODE-DR5 | Staff Table Size: 1365mm W X 680mm D X 750mm H the Table Top work surface to be manufactured using 25mm thick pre laminated particle board (PLPB). All work surface edges are to be duly sealed with 2mm thick PVC edge banding. The understructure C- frame to be made using CRCA MS sheet 20 gauge Thick and Tubular Frame to be made using MS ERW Square Tube with dia 25.4 mm X 1.2mm Thick. The MS ERW Square Tubes: 25.4 mm X 25.4mm X 1.2mm Thickness. The modesty panel is to be made using 20 gauge thick CRCA MS sheet. The table should contain 1 drawer & cupboard unit to the left hand side and 3 drawer units on the right hand side of the table. The metal drawer unit with shell made out of 0.5mm thick CRCA sheet and MS Drawer Tray made out of 0.5mm Thick CRCA MS sheet and the drawer facia to be made out of 22 gauge Thick CRCA sheet. The drawer to be provided with MS Lock with 10 Lever Cam Lock. The handles to be fixed made out of Built in Plastic. The table should have connecting leg rest made out of MS tube. The entire table shall be neatly derusted, powder coated with epoxy polyester powder Name of the institution i.e., KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 12990.0 | 12990.0 | 12.0 | False | None | None | False | None | False | 155880.0 | 0 | | 2384489 | 70929 | None | ITEM CODE-DR6 | Shoe Cabinet: Shoe racks with shelves 8.1ft with uniformly welded 18 gauge pipes for verticals & 16 gauge sheet folded L angles for horizontals and covered with 20guage thick CRCA sheet on top, sides and back. Size 1371H,2463W,381D fitted with pipes consisting of 30 shelvesof size 203H & 381 W in inclined position to stock footwear. The rack will be provided with 4 castors. The entire rack will be derusted, powder coated with epoxy polyster power. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 16810.0 | 16810.0 | 12.0 | False | None | None | False | None | False | 201720.0 | 0 | | 2384490 | 70929 | None | ITEM CODE-DR7 | Class Room Tables: Under structure: C frame shall be made up of 0.9 +/- 0.09mm thick powder coated 50 microns (+/- 10) CRCA MS. Tubular frame is made up of Sq. 25.4 (+/- 0.3mm) X 1.2 (+/- 0.096mm) Thick MS ERW tube. The modesty panel is made up from 1.0 (+/- 0.09mm) thick powder coated 50 microns (+/- 10mm) CRCA MS. The work surface shall be made up of 18 (+/-0.5mm ) thick pre laminated particle board as per with 2 mm thick PVC edge banding on all sides. Shell of the storage unit shall be made up of 0.5 (+/-0.07mm) thick CRCA steel. The drawer tray shall be made up of 0.5 (+/-0.07mm) thick CRCA steel. Drawer front shall be made up of 0.8 (+/- 0.1mm ) thick CRCA steel. Lock shall be of 10 lever cam lock. Handles shall be of plastic handle. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 10480.0 | 10480.0 | 8.0 | False | None | None | False | None | False | 83840.0 | 0 | | 2384491 | 70929 | None | ITEM CODE-DR8 | Library Racks: a Product Size: Width 900mm, Height: 1850mm, Depth: 300mm (DMX Drg. - PL13-A4-20825 R0) b. Construction: Rigid Knockdown construction. c. Material: CRCA 0.8mm Thickness d Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-1) e. Number of Adjustable shelf: Five adjustable shelves (Total 6 Loading levels). Uniformly Distributed Load Capacity per each shelf shall be 80 Kg maximum. f. Shelf back stiffener At the rear side of the shelves back stiffeners are provided. These act as separators between front & rear books. g. Label holder & range indicator Label Holder & Range indicator on each main unit for inserting labels. h. Accessories: Optional stand of 125 mm Height with levelling screws. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 15416.0 | 15416.0 | 10.0 | False | None | None | False | None | False | 154160.0 | 0 | | 2384492 | 70929 | None | ITEM CODE-DR9 | PLATE & TUMBLER STAND: 125 plates Supply of plate & tumbler stand with heavy duty wheels of size 8ft W x 2ft D x 6ft H to stack plates in five rows and tumblers in two rows as per Drawing. MS powder coated to60 microns welded main frame 25mmx50mmx2mm rectangular tubes vertically and horizontally with 6mm rod spaced 1.5 INCH vertically to stack plates individually. Tumbler stand made of 2mm thick MS sheet powder coated to 60 microns on either side with holes to insert tumblers all as directed by the engineer in charge and sample to be approved before supply. The entire stand shall be neatly derusted, powder coated with epoxy polyester powder. Name of the institution i.e., KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 15000.0 | 15000.0 | 2.0 | False | None | None | False | None | False | 30000.0 | 0 | | 2384493 | 70929 | None | ITEM CODE-DR10 | Smart Class :- Projector with Integrated Computer and other accessories with 1 year Onsite Service Warranty Video Conferencing Software for the above integrated Computer system Virtual Classroom Software for the integrated Computer system Ceiling mount kit for the Projector system USB extenders with 5 meter cable length for fixing to Projector system Antiglare White Board Server System Content Access Software and 3D Virtual Interactive experiments Desktops for students (15 x 1 Locations) Headsets Audio Splitter USB Keyboard and Optical Mouse Installation charges of all equipment, including fixing the white board and ceiling mount kit, Internal wiring of LAN, Networking of computers, projector and server system Warranty of 1 year onsite, comprehensive end-to-end AMC for the hardware and softwares with visit to schools every 3 months with successful utilization report from vendor Training Cost 2 days divisional level hands on and assignment based training for 2 teachers Providing Onsite Warranty and AMC Support for all the hardware and software with visit to schools every 3 months with successful utilization report from vendor : 4 years Portable Electronic equipment insurance as per the specification for 1 Year Renewal charges of Portable Electronic equipment insurance for Server System - 1 No., Desktop Computer system 15 Nos., provided for usage by students, Projector System with integrated PC 1 No., including Physical loss / theft for a period of 4 Years Name Boards and Instruction sheet for E-Learning Centre Supplying and drawing of UTP 6E LAN cable Computer Table for E- learning centre Computer chair with armrest for E-learning centre Supplying and fixing of 2 meters Cat 6 Patch cable (272 + 85) Supplying and fixing of 9 U with 650 mm depth switch mounting rack with power manager and cable manager as standard specification Supplying and fixing of I/O socket with back box Supplying and fixing of Network switches 24 port Supplying and fixing of Patch panel for LAN cabling 24 port ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 2646000.0 | 2646000.0 | 1.0 | False | None | None | False | None | False | 2646000.0 | 0 | | 2384494 | 70929 | None | ITEM CODE-DR11 | Mattress type : Pocket Spring Mattresses 1. Mattress Size 189 x 67 x 15 cm (29099 Numbers) & 176 x 74 x 15 cm (3275 Numbers) 2. Coil Count 189 x 67 x 15 cm= 28X 10 176 x 74 x 15 cm =26X 9 3. Construction a) 120mm high pocket spring (dia) core covered with 5mm cotton felt & plastic mesh from top & bottom b) Entire pocket spring core surrounded by border of 75mm shorter side and 84 mmlonger side made out of 28 density hard foam c) Above this core 10mm or 12mm (thickness) 28 density P.U foam pasted on top. d) Above final carcass covered with 20 to 24mm 18density P.U foam quilted fabric from top and bottom 4. Raw Material Specification 1. Spring Coil with 1.8mm dia 5 turns, dia of the spring 55 mm, Flexibility 2.7, Hardness IS 4454 grade part- 2,2003. Spring Material carbonised steel of grade IS-4453 part-1, 2001 & the centre to centre distance of spring 60mm. 2.Spring Coil is pocketed with 80 GSM white Non woven fabric. Fabric type - 130 GSM Knitted Cotton felt - (1000 GSM) Air Vents - 4 nos. individually packed and sealed with LDPE 80 microns Corner fitments - 3 Ply corrugated corner guards to prevent any transit damage Tensile strength 170kg/sq mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 5000.0 | 5000.0 | 250.0 | False | None | None | False | None | False | 1250000.0 | 0 | | 2384495 | 70929 | None | ITEM CODE-DR12 | Pillow Specification Fibers 50:50 recycled & hollow Fiber Weight 500 Grm Fabric Peach polyester 85Gsm and one cotton pillow cover Packing LDPE 250 Gauge Size 17''x27'' recorn pack of 1 pillow ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 400.0 | 400.0 | 250.0 | False | None | None | False | None | False | 100000.0 | 0 | | 2384496 | 70929 | None | ITEM CODE-DR13 | Zamkana Width 91 CMs+/- 2cms Color fatness to washing 2-3 or better Weight/piece 1000 Grm+/-5% Count warp 2/30 to 2/34s +/ -10% Weft 25 to 6s +/-10% Composition Polyster,viscose,cotton Length 198 Cms +/- 2 cm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 315.0 | 315.0 | 250.0 | False | None | None | False | None | False | 78750.0 | 0 | | 2384497 | 70929 | None | ITEM CODE-DR14 | Bed Spread Width 147 CMs+/- 2cms Color fatness to washing 2-3 or better Weight/piece 600 Grm+/-5% Count warp 8s to 12s +/ -10% Weft 2s to 6s +/-10% Composition Polyster,viscose,cotton Length 198 Cms +/- 2 cm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 147.0 | 147.0 | 250.0 | False | None | None | False | None | False | 36750.0 | 0 | | 2384498 | 70929 | None | ITEM CODE-DR15 | Bed Sheet Width 147 CMs+/- 2cms Color fatness to washing 2-3 or better Weight/piece 1000 Grm +/-5% Count warp 2/18s to 2/20s +/ -10% Weft 6s to 10s +/-10% Composition Polyster,viscose,cotton Length 223Cms +/- 2 cm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 420.0 | 420.0 | 250.0 | False | None | None | False | None | False | 105000.0 | 0 | | 2384499 | 70929 | None | ITEM CODE-DR16 | Suppying & Installing reputed brand 55 inch LED TV with android supports. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 75000.0 | 75000.0 | 2.0 | False | None | None | False | None | False | 150000.0 | 0 | | 2384500 | 70929 | None | ITEM CODE-DR17 | Mosquito net GSM-min 28, colour-white,Typing loop-6 loops,polyolefin 100, Tolerance limit+-10% for all above parameters ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 582.0 | 582.0 | 250.0 | False | None | None | False | None | False | 145500.0 | 0 | | 2384501 | 70929 | None | ITEM CODE-DR18 | Supply and installation of 25 KVA Diesel Generator Set, 3Phase, 1500 RPM DG Set: Diesel engine and alternator of the same make shall be close coupled and mounted on a base plate of robust construction with standard accessories. 1) DIESEL ENGINE: a) Diesel Engine shall be air cooled, electric start, developing required B.H.P at 1500 RPM with Class G-2 Governing or better for alternator to deliver specified continuous 25 KVA output as per IS/ISO 8528. b) The Diesel Engine should be capable of providing 10% overload for one hour for every 12 hours continuous running at full load. c) Naturally aspirated engines shall conform to IS: 10000-2/81 d) The Diesel Engine shall be complete with the following standard accessories: i) Fuel tank with capacity for 12 hours continuous running at full load. ii) Exhaust silencer of Residential type. iii) 12V or 24V starting system complete with starter motor, charging alternator with Cutout. iv) Lead Acid Battery/ies of suitable ratings with connecting cables. The battery/ies shall be supplied in charged condition and shall conform to relevant IS Specification. v) Standard set of tools consisting of a set of 3 spanners, one screw driver, one standard plier and one nose plier of appropriate size shall be provided along with DG sets free of cost for each of DG sets. 2) ALTERNATOR: a) The Alternator shall be self excited and self regulated of specified KVA rating in three phase at 415 Volt, 50 Hz, 1500 RPM and 0.8 power factor and shall conform to latest IS/ISO Specification and Standards. The alternators shall be of brush less type with VG-1 Grade of voltage regulation. b) The alternators shall be screen-protected drip proof with Min.IP-21 degree of protection as per latest IS/ISO Specification and Standards. The class of insulation of the Alternator would be 'H'. The rated voltage of Alternator will be 415 V, three phase. 3) MANUAL CONTROL PANEL/INTEGRATED DIGITAL CONTROLLER: a) The Control Panel shall be fabricated from steel/metal sheet of 1.5 mm thickness minimum duly pretreated and aesthetically finished or integrated with the DG set in the form of Digital Controller. b) The Control Panel shall be totally enclosed, dust and vermin proof, floor mounted or wall mounted/skid mounted or integral type with IP-53 degree of protection as per latest IS/ISO Specification and Standards. c) The Control Panel shall have the instrumentation/indicators for speed status, current status, voltage status, Load status, Oil Pressure, low fuel indicator and other operational/safety controls. 4) OPERATION: Manual On-off Push Button Switch on DG set and Change over Switch 5) ACCOUSTIC ENCLOSER a) DG sets shall be provided with integrated acoustic enclosure which shall conform to norms of Central Pollution Control Board (CPCB) as per updated provision. b) The acoustic enclosure supplied shall be in accordance with as per latest IS/ISO or equivalent IEC code for conformity to noise norms. This aspect shall also be verified at the time of delivery. 6) PRE-DESPATCH TESTING a) Supplier shall furnish complete & satisfactory TTC(Type test certificate) for engines, alternators complete with enclosure to be used by them for this rating of DG sets clearly indicating make, model and ratings of the DG sets tested at the time of delivery of the DG set. The TTC of three phase alternators shall cover unbalanced load test as per latest IS/ISO Specification and Standards as applicable. However the engine models/rating shall need relevant certifications as per norms. b) Either of the following types of TTC shall be acceptable: i) Type Test Certificate issued by recognized Government Lab. Type Test Certificate issued by recognized Government Lab irrespective of whether engines and alternators were tested at firm lab or some other lab, but witnessed by Government representative. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 451101.0 | 451101.0 | 1.0 | False | None | None | False | None | False | 451101.0 | 0 | | 2384502 | 70929 | None | ITEM CODE-DR19 | Network Video Recorder: Up to 16 channel IP camera input ,H.265/H.264/MJPEG dual codec decoding, Max 256Mbps incoming bandwidth, Up to 8ch@1080P(4ch@H.265+4ch@H.264) real-time live-view Up to 12Mp resolution preview playback, HDMI/VGA simultaneous video output, 8/16 channel synchronous real-time playback, GRID interface Support Multi-brand network cameras, ONVIF Version 2.4 conformance 3D intelligent positioning, Support 2 SATA HDDs up to 12TB, 2 USB(1 USB3.0), Support IPC UPnP, 8PoE ports Support P2P, QR code scan & add Multiple network monitoring: Web viewer. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 11200.0 | 11200.0 | 1.0 | False | None | None | False | None | False | 11200.0 | 0 | | 2384503 | 70929 | None | ITEM CODE-DR20 | IR Dome camera (Indoor) "2" Megapixel progressive scan CMOS, varifocal lenses 3.3-12MM or better ,H.264&MJPEG dual-stream encoding, Min 20fps@1080P(19201080), Minimum WDR, Day/Night(ICR), 3DNR,AWB,AGC,BLC,Multiplenetwork monitoring: Web viewer, Flexible cropping, On-camera real-time motion detection and privacy mask with 1024 detection zones;Backlight compensation, privacy masking Max. IR LEDs Length20m, IP66, PoE ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 8700.0 | 8700.0 | 5.0 | False | None | None | False | None | False | 43500.0 | 0 | | 2384504 | 70929 | None | ITEM CODE-DR21 | IR Bullet camera (Outdoor - Entrance) "2" Megapixel progressive scan CMOS, varifocal lenses 3.6-12MM or better, H.264&MJPEG dual-stream encoding, Min20fps@1080P(19201080), Minimum WDR, Day/Night(ICR), 3DNR,AWB,AGC,BLC ,Multiple network monitoring: Web viewer, Flexible cropping, On-camera real-time motion detection and privacy mask with 1024 detection zones; Backlight compensation, privacy masking Max. IR LEDs Length20m, IP66, PoE ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 8500.0 | 8500.0 | 3.0 | False | None | None | False | None | False | 25500.0 | 0 | | 2384505 | 70929 | None | ITEM CODE-DR22 | 18.5 Inch Display Monitor ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 9450.0 | 9450.0 | 1.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2384506 | 70929 | None | ITEM CODE-DR23 | STORAGE Hard disk 4 TB Surveillance Hard Drives - Surveillance Storage is built for 24/7 always-on surveillance in high-definition security systems for the Videos Footages generated by all the Cameras installed within the network for a period of 3 months in case of Boys' Residential Schools and for a period of 6 months in case of Girls' /Co-education Residential Schools. Off-line Backup: The system should capable of compressing the video footages stored beyond the capacity of online storage capacity of the NVR, and upload the same to Private Cloud Servers via network. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 11800.0 | 11800.0 | 1.0 | False | None | None | False | None | False | 11800.0 | 0 | | 2384507 | 70929 | None | ITEM CODE-DR24 | 6 u server rack with 500 depth wall mounted 1 fan ,1 self and spike card 6 output ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 3500.0 | 3500.0 | 1.0 | False | None | None | False | None | False | 3500.0 | 0 | | 2384508 | 70929 | None | ITEM CODE-DR25 | 8 port 10/100 switch with 4 port POE with more than 50 watts POE budget or 8 port 10/100 switch with 4 port POE with more than 40 watts POE budget ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 9450.0 | 9450.0 | 1.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2384509 | 70929 | None | ITEM CODE-DR26 | RJ 45 Connectors with 4X4" Boxes for Cameras. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 729.0 | 729.0 | 8.0 | False | None | None | False | None | False | 5832.0 | 0 | | 2384510 | 70929 | None | ITEM CODE-DR27 | Power variation controller unit ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 13500.0 | 13500.0 | 1.0 | False | None | None | False | None | False | 13500.0 | 0 | | 2384511 | 70929 | None | ITEM CODE-DR28 | CAT Cable with Including 25 mm Round Pvc White Conduit ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 340.0 | 340.0 | 100.0 | False | None | None | False | None | False | 34000.0 | 0 | | 2384512 | 70929 | None | ITEM CODE-DR29 | Electrical cable to connect all equipments ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 334.0 | 334.0 | 100.0 | False | None | None | False | None | False | 33400.0 | 0 | | 2384513 | 70929 | None | ITEM CODE-DR30 | Dining table: 6 seater The overall dimensions of the table should be 1800mm(W) X 800mm(D) X750mm(H).The table top should be made of SS-204 grade 1mm thick brush finish stainless steel. The top frame assembly should be rectangular tube of dimensions 50.8mm X 25.4mm X 1.6mm thick MS ERW and cylindrical socket which are welded and powder coated. The side frame assembly should be fixed to the top with screws. The side frame assembly should be made of combination of circular and rectangular tubes of MS ERW. The circular tube should be of diameter 38.1mm and thickness 1.6mm.The rectangular tube should be of dimensions 50.8mm X 25.4mm and thickness 1.6mm.Circular and rectangular tubes should be welded together to form the assembly. Side frame assembly should be fixed to top frame assembly. The stool top should be made SS-204 grade 1mm thick brush finish stainless steel with MS Ribs for strength. The stool top should have an height of 450mm and the diameter of the stool top should be 300mm.The stool assembly should be foldable above the side frame. Cross members should be provided between side frame assembly. Cross members should be made of 50.8mm X 25.4mm X 1.6mm thick MS ERW of 1.6mm thickness and should be powder coated. Finish should be epoxy polyester powder coated of 40-60 micron thickness. Shoe should be provided at the bottom. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 13000.0 | 13000.0 | 32.0 | False | None | None | False | None | False | 416000.0 | 0 | | 2384514 | 70929 | None | ITEM CODE-DR31 | Galvanized Iron Storage Trunks The GI Steel trunk shall be as per IS 7257:1973 (Reaffirmed 2006) as per the drawing enclosed. The body of the steel trunk shall be made in three panel construction viz. front, bottom and back in one piece and the two sides in two separate pieces. The top portion of the box (Lid cover) is in one piece construction. Metal: Galvanized Iron Sheet Thickness: 0.80 mm. Dimension in mm:675 L X 370 W X 330 D Padlock: Front, 1 No. Side Handles: 2 Nos. Front Handle: 1 No. 1. All joints shall be double seamed. 2. All dimensions in mm. 3. Tolerance L = +/- 5mm, H =+/- 5mm, All other tolerance as per relevant IS. 4. Method of component fixing By riveting. 5. Hasp & Staple size 150mm as per IS 363:1993 (Reaffirmed 2003), type- II. 6. Material: GI Sheet 0.80mm thick to Class 3 of IS : 2771969 2nd revision for Body, Lid, Cover, Pocket & Channels. 7. Trunk weight Min 11.2 Kgs. 8. Steel Trunk shall be properly cleaned, de-greased, pickled. 9. Name of the institution i.e. KREIS should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 1700.0 | 1700.0 | 250.0 | False | None | None | False | None | False | 425000.0 | 0 | | 2384515 | 70929 | None | ITEM CODE-DR32 | Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete 3 KVA ON LINE UPS Each ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 42480.0 | 42480.0 | 2.0 | False | None | None | False | None | False | 84960.0 | 0 | | 2384516 | 70929 | None | ITEM CODE-DR33 | Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150 AH capacity ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 14100.0 | 14100.0 | 12.0 | False | None | None | False | None | False | 169200.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SAMBRANI - PLAYGROUNDS | 1729038.16 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384517 | 70930 | None | Item code-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 107.1 | 107.1 | 2146.46 | False | None | None | False | None | False | 229885.866 | 0 | | 2384518 | 70930 | None | Item code-1.11 | Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2285.85 | 2285.85 | 55.0 | False | None | None | False | None | False | 125721.75 | 0 | | 2384519 | 70930 | None | Item code-4.13.ii.a | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including
spreading in uniform thickness, hand packing, rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. By Manual Means, Grading-II (53 mm to 22.4 mm), Using Screening Crushable type such as Moorum or Gravel ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2575.65 | 2575.65 | 60.0 | False | None | None | False | None | False | 154539.0 | 0 | | 2384520 | 70930 | None | Item code-2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Footings) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6240.15 | 6240.15 | 122.0 | False | None | None | False | None | False | 761298.3 | 0 | | 2384521 | 70930 | None | Item code-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 93929.85 | 93929.85 | 2.37 | False | None | None | False | None | False | 222613.7445 | 0 | | 2384522 | 70930 | None | Item code-8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 389.55 | 389.55 | 600.0 | False | None | None | False | None | False | 233730.0 | 0 | | 2384523 | 70930 | None | Item code-8.1 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 89.25 | 89.25 | 14.0 | False | None | None | False | None | False | 1249.5 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | GROUND FLOOR -BUILDING & INFRASTRUCTURE WORKS(KUJALLI) | 88165836.98 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384524 | 70931 | None | Vol. 03 Item Code 2.5,(ii) b | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness..(ii) By Mechanical Means using Dozer (a) In area of light jungle, As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 03 Item Code: 2.5 (ii).b) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 4.4 | 4.4 | 3397.0 | False | None | None | False | None | False | 14946.8 | 0 | | 2384525 | 70931 | None | Vol. 01 Item Code: 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.12) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 106.4 | 106.4 | 1955.46 | False | None | None | False | None | False | 208060.944 | 0 | | 2384526 | 70931 | None | Vol. 01 Item Code: 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.14.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 114.24 | 114.24 | 6091.0 | False | None | None | False | None | False | 695835.84 | 0 | | 2384527 | 70931 | None | Vol. 01 Item Code: 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.9) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 297.92 | 297.92 | 4480.0 | False | None | None | False | None | False | 1334681.6 | 0 | | 2384528 | 70931 | None | Vol. 01 Item Code: 1.8 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.8) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 530.88 | 530.88 | 3150.0 | False | None | None | False | None | False | 1672272.0 | 0 | | 2384529 | 70931 | None | Vol.02 Item Code 4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol.02 Item Code 4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 132.16 | 132.16 | 2968.0 | False | None | None | False | None | False | 392250.88 | 0 | | 2384530 | 70931 | None | Vol. 01 Item Code: 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge including shuttering (PWD SR 2023-24 Vol. 01 Item Code: 2.1.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6707.68 | 6707.68 | 791.0 | False | None | None | False | None | False | 5305774.88 | 0 | | 2384531 | 70931 | None | Vol. 01 Item Code: 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For DPC & Flagging concrete Including shuttering (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7172.48 | 7172.48 | 51.0 | False | None | None | False | None | False | 365796.48 | 0 | | 2384532 | 70931 | None | Vol. 01 Item Code: 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Cill Including shuttering (20% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 8606.97 | 8606.97 | 6.0 | False | None | None | False | None | False | 51641.82 | 0 | | 2384533 | 70931 | None | Vol. 01 Item Code: 5.6 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 5.6) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7221.76 | 7221.76 | 94.0 | False | None | None | False | None | False | 678845.44 | 0 | | 2384534 | 70931 | None | Vol. 01 Item Code 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Footing Including shuttering (8% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7664.02 | 7664.02 | 853.0 | False | None | None | False | None | False | 6537409.06 | 0 | | 2384535 | 70931 | None | Vol. 01 Item Code 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Column upto plinth Including shuttering (70% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12063.74 | 12063.74 | 102.0 | False | None | None | False | None | False | 1230501.48 | 0 | | 2384536 | 70931 | None | Vol. 01 Item Code 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Plinth beam Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10644.48 | 10644.48 | 224.0 | False | None | None | False | None | False | 2384363.52 | 0 | | 2384537 | 70931 | None | Vol. 01 Item Code 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Curtain wall Including shuttering (10% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7805.95 | 7805.95 | 111.0 | False | None | None | False | None | False | 866460.45 | 0 | | 2384538 | 70931 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Column Including shuttering (70% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 13029.07 | 13029.07 | 156.0 | False | None | None | False | None | False | 2032534.92 | 0 | | 2384539 | 70931 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Roof beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12262.65 | 12262.65 | 175.0 | False | None | None | False | None | False | 2145963.75 | 0 | | 2384540 | 70931 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Roof slab Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11496.24 | 11496.24 | 419.0 | False | None | None | False | None | False | 4816924.56 | 0 | | 2384541 | 70931 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Lintel beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12262.65 | 12262.65 | 17.0 | False | None | None | False | None | False | 208465.05 | 0 | | 2384542 | 70931 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Staircase Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11496.24 | 11496.24 | 59.0 | False | None | None | False | None | False | 678278.16 | 0 | | 2384543 | 70931 | None | Vol. 01 Item Code: 2.5.1 | Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Chejja & Shelves Including shuttering (45% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10767.12 | 10767.12 | 32.0 | False | None | None | False | None | False | 344547.84 | 0 | | 2384544 | 70931 | None | Vol 1, 2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. As per the direction of Engineer Incharge. (Buildings) (PWD SR 2023-24 Vol. 01 Item Code: 2.11.a) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Tonne | 100191.84 | 100191.84 | 173.82 | False | None | None | False | None | False | 17415345.6288 | 0 | | 2384545 | 70931 | None | Vol 1, 2.11.h | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(All other type of structures) (PWD SR 2023-24 Vol. 01 Item Code: 2.11.h) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Tonne | 88492.32 | 88492.32 | 17.1344 | False | None | None | False | None | False | 1516262.807808 | 0 | | 2384546 | 70931 | None | Vol 2, 5.7 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 5.7 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7565.6 | 7565.6 | 1202.0 | False | None | None | False | None | False | 9093851.2 | 0 | | 2384547 | 70931 | None | Vol 2, 12.15 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ). As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol.02 Item code:12.15) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 8337.28 | 8337.28 | 27.0 | False | None | None | False | None | False | 225106.56 | 0 | | 2384548 | 70931 | None | Vol 2, 12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 12.13.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 110672.8 | 110672.8 | 5.1 | False | None | None | False | None | False | 564431.28 | 0 | | 2384549 | 70931 | None | Vol. 02 Item Code: 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 12.51) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 1137.92 | 1137.92 | 62.0 | False | None | None | False | None | False | 70551.04 | 0 | | 2384550 | 70931 | None | Vol 2, 12.55.2 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelam As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Ciode: 12.55.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 2284.8 | 2284.8 | 119.0 | False | None | None | False | None | False | 271891.2 | 0 | | 2384551 | 70931 | None | Vol 2, 12.93.1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62X100mm As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 12.93.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 786.24 | 786.24 | 279.0 | False | None | None | False | None | False | 219360.96 | 0 | | 2384552 | 70931 | None | Vol 2, 12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30mm thick As per the direction of Engineer Incharge. ( PWD SR 2023-24 VOl. 02 Item Code 12.94.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3903.2 | 3903.2 | 81.0 | False | None | None | False | None | False | 316159.2 | 0 | | 2384553 | 70931 | None | Vol 2, 12.74.1 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm As per the direction of Engineer Incharge. ( PWD SR 2023-24 VOl. 02 Item Code 12.74.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 114.24 | 114.24 | 456.0 | False | None | None | False | None | False | 52093.44 | 0 | | 2384554 | 70931 | None | Vol 2, 22.15.1 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm, As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 22.15.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 504.0 | 504.0 | 228.0 | False | None | None | False | None | False | 114912.0 | 0 | | 2384555 | 70931 | None | Vol 2, 22.15.10 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Door stopper 75mm, As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 22.15.10) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 112.0 | 112.0 | 58.0 | False | None | None | False | None | False | 6496.0 | 0 | | 2384556 | 70931 | None | Vol 2, 22.15.6 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm, As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 22.15.6) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 168.0 | 168.0 | 218.0 | False | None | None | False | None | False | 36624.0 | 0 | | 2384557 | 70931 | None | Vol 2, 12.88 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). As per the direction of Engineer Incharge. (PWD SR Vol.02 Item Code: 12.88) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6036.8 | 6036.8 | 134.0 | False | None | None | False | None | False | 808931.2 | 0 | | 2384558 | 70931 | None | Vol 2, 12.90 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain floatglass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).As per the direction of Engineer Incharge.(PWD SR Vol.02 Item Code: 12.90) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7542.08 | 7542.08 | 144.0 | False | None | None | False | None | False | 1086059.52 | 0 | | 2384559 | 70931 | None | Vol 2, 12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 12.85) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6405.28 | 6405.28 | 31.0 | False | None | None | False | None | False | 198563.68 | 0 | | 2384560 | 70931 | None | Vol 2, 11.34.B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code 11.34.B) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 204.96 | 204.96 | 7323.42 | False | None | None | False | None | False | 1501008.1632 | 0 | | 2384561 | 70931 | None | Vol 2, 20.4.2 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1351.84 | 1351.84 | 11.0 | False | None | None | False | None | False | 14870.24 | 0 | | 2384562 | 70931 | None | Vol 2, 9.17.2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.e. Size of Tile 600x600 mm As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 9.17.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1316.0 | 1316.0 | 342.0 | False | None | None | False | None | False | 450072.0 | 0 | | 2384563 | 70931 | None | Vol 2, 9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 9.24) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3194.24 | 3194.24 | 2348.0 | False | None | None | False | None | False | 7500075.52 | 0 | | 2384564 | 70931 | None | Vol 2, 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 9.11) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 995.68 | 995.68 | 182.0 | False | None | None | False | None | False | 181213.76 | 0 | | 2384565 | 70931 | None | Vol 2, 9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02, Item Code: 9.39) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1622.88 | 1622.88 | 740.0 | False | None | None | False | None | False | 1200931.2 | 0 | | 2384566 | 70931 | None | Vol 2, 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code :8.2.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 330.4 | 330.4 | 6505.0 | False | None | None | False | None | False | 2149252.0 | 0 | | 2384567 | 70931 | None | Vol 2, 8.3.1 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions
of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code 8.3.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 396.48 | 396.48 | 3690.0 | False | None | None | False | None | False | 1463011.2 | 0 | | 2384568 | 70931 | None | Vol 2, 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol.02 Item Code: 8.9) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 431.2 | 431.2 | 2449.0 | False | None | None | False | None | False | 1056008.8 | 0 | | 2384569 | 70931 | None | Vol 2, 8.16.3 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 100mm wide As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.16.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 49.28 | 49.28 | 3950.0 | False | None | None | False | None | False | 194656.0 | 0 | | 2384570 | 70931 | None | Vol 2, 8.16.a | KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.16.a) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1386.56 | 1386.56 | 77.0 | False | None | None | False | None | False | 106765.12 | 0 | | 2384571 | 70931 | None | Vol 2, 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.51) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 112.0 | 112.0 | 9445.0 | False | None | None | False | None | False | 1057840.0 | 0 | | 2384572 | 70931 | None | Vol 2, 8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.55.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 59.36 | 59.36 | 9445.0 | False | None | None | False | None | False | 560655.2 | 0 | | 2384573 | 70931 | None | Vol 2, 8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, Vol.02 Item Code: 8.54.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 123.2 | 123.2 | 9130.26 | False | None | None | False | None | False | 1124848.032 | 0 | | 2384574 | 70931 | None | Vol 2, 8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.30) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 194.88 | 194.88 | 6139.0 | False | None | None | False | None | False | 1196368.32 | 0 | | 2384575 | 70931 | None | Vol 2, 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.40) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 128.8 | 128.8 | 1464.0 | False | None | None | False | None | False | 188563.2 | 0 | | 2384576 | 70931 | None | Vol 2, 11.28 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24, Vol.02 Item Code: 11.28) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 632.8 | 632.8 | 2010.0 | False | None | None | False | None | False | 1271928.0 | 0 | | 2384577 | 70931 | None | Vol 2, 11.57.2 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (PWD SR 2023-24, Vol. 02 Item Code: 11.57.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 126.56 | 126.56 | 451.0 | False | None | None | False | None | False | 57078.56 | 0 | | 2384578 | 70931 | None | Vol 2, 11.57.1 | Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire (PWD SR 2023-24, Vol. 02 Item Code: 11.57.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 20.16 | 20.16 | 5400.0 | False | None | None | False | None | False | 108864.0 | 0 | | 2384579 | 70931 | None | Vol 2, 11.5.1 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge (PWD SR 2023-24 Vol.02 Item Code: 11.5.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 5015.36 | 5015.36 | 4.0 | False | None | None | False | None | False | 20061.44 | 0 | | 2384580 | 70931 | None | Vol 2, 11.25.2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. (PWD SR 2023-24, Vol. 02 Item Code: 11.25.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 152.32 | 152.32 | 910.0 | False | None | None | False | None | False | 138611.2 | 0 | | 2384581 | 70931 | None | Vol 2, 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on Newterrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 15.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 915.04 | 915.04 | 294.0 | False | None | None | False | None | False | 269021.76 | 0 | | 2384582 | 70931 | None | Vol 2, 8.12 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 71.68 | 71.68 | 36.0 | False | None | None | False | None | False | 2580.48 | 0 | | 2384583 | 70931 | None | Vol 2, 7.18 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 7.18 ) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2259.04 | 2259.04 | 95.0 | False | None | None | False | None | False | 214608.8 | 0 | | 2384584 | 70931 | None | Vol 3, 4.17 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (PWD SR 2023-24 Vol. 03 Item Code: 4.17, 406) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 2866.08 | 2866.08 | 144.0 | False | None | None | False | None | False | 412715.52 | 0 | | 2384585 | 70931 | None | Vol 1, 2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(For slab includding shuttering 50%) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10644.48 | 10644.48 | 8.0 | False | None | None | False | None | False | 85155.84 | 0 | | 2384586 | 70931 | None | Vol 1, 2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(For Cement Concrete Drain Wall includding shuttering 35%) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 9580.03 | 9580.03 | 6.0 | False | None | None | False | None | False | 57480.18 | 0 | | 2384587 | 70931 | None | Vol 3, 16.28 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7564.48 | 7564.48 | 128.0 | False | None | None | False | None | False | 968253.44 | 0 | | 2384588 | 70931 | None | Vol 3, 16.15.a | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6 1200 dia. For Garbage bins ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 9436.0 | 9436.0 | 4.0 | False | None | None | False | None | False | 37744.0 | 0 | | 2384589 | 70931 | None | Vol 2, 8.6.2 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Vol. 02 Item Code: 8.6.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 480.48 | 480.48 | 624.0 | False | None | None | False | None | False | 299819.52 | 0 | | 2384590 | 70931 | None | Vol. 01 Item Code: 2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(For Raft includding shuttering 8%) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7648.3 | 7648.3 | 41.0 | False | None | None | False | None | False | 313580.3 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | FIRSR FLOOR-BUILDING WORK(KUJALLI) | 35866652.79 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384591 | 70932 | None | Vol. 01 Item Code 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Cill Including shuttering (20% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 8693.04 | 8693.04 | 5.0 | False | None | None | False | None | False | 43465.2 | 0 | | 2384592 | 70932 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Column Including shuttering (70% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 13159.36 | 13159.36 | 105.0 | False | None | None | False | None | False | 1381732.8 | 0 | | 2384593 | 70932 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Roof beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12385.28 | 12385.28 | 111.0 | False | None | None | False | None | False | 1374766.08 | 0 | | 2384594 | 70932 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Roof slab Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11611.2 | 11611.2 | 291.0 | False | None | None | False | None | False | 3378859.2 | 0 | | 2384595 | 70932 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Lintel beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12385.28 | 12385.28 | 15.0 | False | None | None | False | None | False | 185779.2 | 0 | | 2384596 | 70932 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Staircase Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11611.2 | 11611.2 | 55.0 | False | None | None | False | None | False | 638616.0 | 0 | | 2384597 | 70932 | None | Vol. 01 Item Code: 2.5.1 | Providing and laying in position Cement Concrete for all Super structures ofbuilding , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Chejja & shelves Including shuttering (45% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10874.79 | 10874.79 | 22.0 | False | None | None | False | None | False | 239245.38 | 0 | | 2384598 | 70932 | None | Vol 1, 2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(Buildings) (PWD SR 2023-24 Vol. 01 Item Code: 2.11.a) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Tonne | 101193.75 | 101193.75 | 64.158 | False | None | None | False | None | False | 6492388.6125 | 0 | | 2384599 | 70932 | None | Vol 2, 5.7 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 5.7) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7641.2 | 7641.2 | 598.0 | False | None | None | False | None | False | 4569437.6 | 0 | | 2384600 | 70932 | None | Vol 2, 12.15 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ). As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol.02 Item code:12.15) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 8420.65 | 8420.65 | 11.0 | False | None | None | False | None | False | 92627.15 | 0 | | 2384601 | 70932 | None | Vol 2, 12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 12.13.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 111779.5 | 111779.5 | 3.4 | False | None | None | False | None | False | 380050.3 | 0 | | 2384602 | 70932 | None | Vol. 02 Item Code: 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 12.51) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 1149.29 | 1149.29 | 37.0 | False | None | None | False | None | False | 42523.73 | 0 | | 2384603 | 70932 | None | Vol 2, 12.55.2 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelam As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Ciode: 12.55.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 2307.64 | 2307.64 | 80.0 | False | None | None | False | None | False | 184611.2 | 0 | | 2384604 | 70932 | None | Vol 2, 12.93.1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62X100mm As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 12.93.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 794.1 | 794.1 | 289.0 | False | None | None | False | None | False | 229494.9 | 0 | | 2384605 | 70932 | None | Vol 2, 12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30mm thick As per the direction of Engineer Incharge. ( PWD SR 2023-24 VOl. 02 Item Code 12.94.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3942.23 | 3942.23 | 82.0 | False | None | None | False | None | False | 323262.86 | 0 | | 2384606 | 70932 | None | Vol 2, 12.74.1 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm ( PWD SR 2023-24 VOl. 02 Item Code 12.74.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 115.38 | 115.38 | 364.0 | False | None | None | False | None | False | 41998.32 | 0 | | 2384607 | 70932 | None | Vol 2, 22.15.1 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm, As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 22.15.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 509.04 | 509.04 | 182.0 | False | None | None | False | None | False | 92645.28 | 0 | | 2384608 | 70932 | None | Vol 2, 22.15.10 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Door stopper 75mm, As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 22.15.10) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 113.12 | 113.12 | 39.0 | False | None | None | False | None | False | 4411.68 | 0 | | 2384609 | 70932 | None | Vol 2, 22.15.6 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm, As per the direction of Engineer Incharge. (PWD SR 2023-24 VOl. 02 Item Code 22.15.6) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 169.68 | 169.68 | 182.0 | False | None | None | False | None | False | 30881.76 | 0 | | 2384610 | 70932 | None | Vol 2, 12.88 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). As per the direction of Engineer Incharge. (PWD SR Vol.02 Item Code: 12.88) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6097.16 | 6097.16 | 78.0 | False | None | None | False | None | False | 475578.48 | 0 | | 2384611 | 70932 | None | Vol 2, 12.90 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain floatglass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).As per the direction of Engineer Incharge.(PWD SR Vol.02 Item Code: 12.90) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7617.5 | 7617.5 | 162.0 | False | None | None | False | None | False | 1234035.0 | 0 | | 2384612 | 70932 | None | Vol 2, 12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 12.85) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6469.33 | 6469.33 | 30.0 | False | None | None | False | None | False | 194079.9 | 0 | | 2384613 | 70932 | None | Vol 2, 11.34.B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code 11.34.B) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 207.0 | 207.0 | 6264.3 | False | None | None | False | None | False | 1296710.1 | 0 | | 2384614 | 70932 | None | Vol 2, 20.4.2 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1365.35 | 1365.35 | 8.0 | False | None | None | False | None | False | 10922.8 | 0 | | 2384615 | 70932 | None | Vol 2, 9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 9.24) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 3226.18 | 3226.18 | 1346.0 | False | None | None | False | None | False | 4342438.28 | 0 | | 2384616 | 70932 | None | Vol 2, 9.17.2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.e. Size of Tile 600x600 mm As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 9.17.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1329.16 | 1329.16 | 342.0 | False | None | None | False | None | False | 454572.72 | 0 | | 2384617 | 70932 | None | Vol 2, 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 9.11) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1005.63 | 1005.63 | 169.0 | False | None | None | False | None | False | 169951.47 | 0 | | 2384618 | 70932 | None | Vol 2, 9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02, Item Code: 9.39) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1639.1 | 1639.1 | 670.0 | False | None | None | False | None | False | 1098197.0 | 0 | | 2384619 | 70932 | None | Vol 2, 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code :8.2.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 333.7 | 333.7 | 5048.0 | False | None | None | False | None | False | 1684517.6 | 0 | | 2384620 | 70932 | None | Vol 2, 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol.02 Item Code: 8.9) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 435.51 | 435.51 | 2148.0 | False | None | None | False | None | False | 935475.48 | 0 | | 2384621 | 70932 | None | Vol 2, 8.16.3 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 100mm wide As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.16.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 49.77 | 49.77 | 3168.0 | False | None | None | False | None | False | 157671.36 | 0 | | 2384622 | 70932 | None | Vol 2, 8.16.a | KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.16.a) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 1400.42 | 1400.42 | 30.0 | False | None | None | False | None | False | 42012.6 | 0 | | 2384623 | 70932 | None | Vol 2, 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.51) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 113.12 | 113.12 | 6927.0 | False | None | None | False | None | False | 783582.24 | 0 | | 2384624 | 70932 | None | Vol 2, 8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.55.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 59.95 | 59.95 | 6927.0 | False | None | None | False | None | False | 415273.65 | 0 | | 2384625 | 70932 | None | Vol 2, 8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, Vol.02 Item Code: 8.54.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 124.43 | 124.43 | 6818.932 | False | None | None | False | None | False | 848479.70876 | 0 | | 2384626 | 70932 | None | Vol 2, 8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.30) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 196.82 | 196.82 | 2148.0 | False | None | None | False | None | False | 422769.36 | 0 | | 2384627 | 70932 | None | Vol 2, 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.40) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 130.08 | 130.08 | 714.0 | False | None | None | False | None | False | 92877.12 | 0 | | 2384628 | 70932 | None | Vol 2, 11.28 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24, Vol.02 Item Code: 11.28) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 639.12 | 639.12 | 610.0 | False | None | None | False | None | False | 389863.2 | 0 | | 2384629 | 70932 | None | Vol 2, 8.12 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 72.39 | 72.39 | 36.0 | False | None | None | False | None | False | 2606.04 | 0 | | 2384630 | 70932 | None | Vol 1, 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. for screed concrete (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7244.2 | 7244.2 | 44.0 | False | None | None | False | None | False | 318744.8 | 0 | | 2384631 | 70932 | None | Vol 2, 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on Newterrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 15.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 924.19 | 924.19 | 755.0 | False | None | None | False | None | False | 697763.45 | 0 | | 2384632 | 70932 | None | Vol 1, 2.4.1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates For Column Including shuttering for Dummy columns(70% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11955.53 | 11955.53 | 6.0 | False | None | None | False | None | False | 71733.18 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | SECOND FLOOR-BUILDING WORK(KUJALLI) | 8256403.67 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384633 | 70933 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Column Including shuttering (70% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 13289.65 | 13289.65 | 15.0 | False | None | None | False | None | False | 199344.75 | 0 | | 2384634 | 70933 | None | Vol. 01 Item Code: 2.1.4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates For Column Including shuttering (70% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.1.4) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12073.91 | 12073.91 | 25.0 | False | None | None | False | None | False | 301847.75 | 0 | | 2384635 | 70933 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Roof beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12507.9 | 12507.9 | 16.0 | False | None | None | False | None | False | 200126.4 | 0 | | 2384636 | 70933 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Roof slab Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11726.16 | 11726.16 | 43.0 | False | None | None | False | None | False | 504224.88 | 0 | | 2384637 | 70933 | None | Vol. 01 Item Code: 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Lintel beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24, Vol. 01 Item Code: 2.5.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 12507.9 | 12507.9 | 2.0 | False | None | None | False | None | False | 25015.8 | 0 | | 2384638 | 70933 | None | Vol 1, 2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. As per the direction of Engineer Incharge. (Buildings) (PWD SR 2023-24 Vol. 01 Item Code: 2.11.a) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Tonne | 102195.6 | 102195.6 | 12.0799 | False | None | None | False | None | False | 1234512.62844 | 0 | | 2384639 | 70933 | None | Vol 2, 5.7 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 5.7) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7716.91 | 7716.91 | 173.0 | False | None | None | False | None | False | 1335025.43 | 0 | | 2384640 | 70933 | None | Vol. 02 Item Code: 11.5.1 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge( PWD SR 2023-24 VOl. 02 Item Code 11.5.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 5115.66 | 5115.66 | 12.0 | False | None | None | False | None | False | 61387.92 | 0 | | 2384641 | 70933 | None | Vol 2 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code :8.2.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 337.0 | 337.0 | 177.0 | False | None | None | False | None | False | 59649.0 | 0 | | 2384642 | 70933 | None | Vol 2 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol.02 Item Code: 8.9) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 439.82 | 439.82 | 1504.0 | False | None | None | False | None | False | 661489.28 | 0 | | 2384643 | 70933 | None | Vol 2, 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 8.51) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 114.24 | 114.24 | 280.0 | False | None | None | False | None | False | 31987.2 | 0 | | 2384644 | 70933 | None | Vol 2, 8.55.2 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.55.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 60.54 | 60.54 | 280.0 | False | None | None | False | None | False | 16951.2 | 0 | | 2384645 | 70933 | None | Vol 2, 8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, Vol.02 Item Code: 8.54.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 125.66 | 125.66 | 280.0 | False | None | None | False | None | False | 35184.8 | 0 | | 2384646 | 70933 | None | Vol 2, 8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.30) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 198.77 | 198.77 | 1504.0 | False | None | None | False | None | False | 298950.08 | 0 | | 2384647 | 70933 | None | Vol 2, 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. for screed concrete (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7315.92 | 7315.92 | 143.7599 | False | None | None | False | None | False | 1051735.927608 | 0 | | 2384648 | 70933 | None | Vol 1, 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on Newterrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. As per the direction of Engineer Incharge. (PWD SR 2023-24, Vol. 02 Item Code: 15.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 933.34 | 933.34 | 2397.0 | False | None | None | False | None | False | 2237215.98 | 0 | | 2384649 | 70933 | None | Vol. 02 Item Code: 8.12 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kgs | 73.11 | 73.11 | 24.0 | False | None | None | False | None | False | 1754.64 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | WATER SUPPLY AND SANITORY WROKS,SUMP,STP,WASHING PLATFORM AND DRYING AREA(KUJALLI) | 13071165.6 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384650 | 70934 | None | Vol.2, 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore (PWD SR 2023-24, Vol. 02 Item Code: 13.2.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 320.32 | 320.32 | 252.0 | False | None | None | False | None | False | 80720.64 | 0 | | 2384651 | 70934 | None | Vol.2, 13.8.1.2 | Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore (PWD SR 2023-24, Vol. 02 Item Code: 13.8.1.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 101.92 | 101.92 | 24.0 | False | None | None | False | None | False | 2446.08 | 0 | | 2384652 | 70934 | None | Vol.2, 13.48 | Provoding and fixing on wall face unplastisized Rigid PVC rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes 100mm diameter (PWD SR 2023-24, Vol. 02 Item Code: 13.48) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 325.92 | 325.92 | 312.9 | False | None | None | False | None | False | 101980.368 | 0 | | 2384653 | 70934 | None | Vol. 01 Item Code: 1.12 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 106.4 | 106.4 | 100.0 | False | None | None | False | None | False | 10640.0 | 0 | | 2384654 | 70934 | None | Vol.1, 1.6.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.. In all kinds of soils. Depth upto 1.50m (PWD SR 2023-24, Vol. 01 Item Code 1.6.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 542.08 | 542.08 | 257.0 | False | None | None | False | None | False | 139314.56 | 0 | | 2384655 | 70934 | None | Vol.1, 1.15.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.15.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 114.24 | 114.24 | 600.0 | False | None | None | False | None | False | 68544.0 | 0 | | 2384656 | 70934 | None | Vol.1, 1.15.2 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting depth exceeding 1.5m upto 3 m. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.15.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 131.04 | 131.04 | 105.0 | False | None | None | False | None | False | 13759.2 | 0 | | 2384657 | 70934 | None | Vol.1, 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.9) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 297.92 | 297.92 | 117.6 | False | None | None | False | None | False | 35035.392 | 0 | | 2384658 | 70934 | None | Vol.1, 1.8 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 1.8) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 530.88 | 530.88 | 36.0 | False | None | None | False | None | False | 19111.68 | 0 | | 2384659 | 70934 | None | Vol.2, 4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. PWD SR 2023-24 Vol.02 Item Code 4.1 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 132.16 | 132.16 | 80.0 | False | None | None | False | None | False | 10572.8 | 0 | | 2384660 | 70934 | None | Vol.1, 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates including shuttering As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 01 Item Code: 2.1.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6707.68 | 6707.68 | 69.0 | False | None | None | False | None | False | 462829.92 | 0 | | 2384661 | 70934 | None | Vol.1, 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. including shuttering (PWD SR 2023-24 Vol. 01 Item Code 2.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7081.76 | 7081.76 | 30.0 | False | None | None | False | None | False | 212452.8 | 0 | | 2384662 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Footing Including shuttering (8% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7664.02 | 7664.02 | 43.0 | False | None | None | False | None | False | 329552.86 | 0 | | 2384663 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For wall Including shuttering (10% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 7805.95 | 7805.95 | 92.0 | False | None | None | False | None | False | 718147.4 | 0 | | 2384664 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For slab Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10644.48 | 10644.48 | 21.0 | False | None | None | False | None | False | 223534.08 | 0 | | 2384665 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Plinth Beam Including shuttering (50% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10644.48 | 10644.48 | 8.0 | False | None | None | False | None | False | 85155.84 | 0 | | 2384666 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11354.11 | 11354.11 | 1.04 | False | None | None | False | None | False | 11808.2744 | 0 | | 2384667 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. As per the direction of Engineer Incharge. For Lintel Beam Including shuttering (60% of finished RCC Cost) (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 11354.11 | 11354.11 | 2.0 | False | None | None | False | None | False | 22708.22 | 0 | | 2384668 | 70934 | None | Vol.1, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For Chejja including Shuttering 45% of rcc cost (PWD SR 2023-24 Vol. 01 Item Code 2.2.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 10289.66 | 10289.66 | 0.3 | False | None | None | False | None | False | 3086.898 | 0 | | 2384669 | 70934 | None | Vol.1, 2.11.h | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. As per the direction of Engineer Incharge. (for all other type of structures) (PWD SR 2023-24 Vol. 01 Item Code: 2.11.h) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | MT | 88492.32 | 88492.32 | 18.68 | False | None | None | False | None | False | 1653036.5376 | 0 | | 2384670 | 70934 | None | Vol.2, 15.4 | Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 400% and having solid content of above 90% @ 1.6kg/m2 in 2 coats to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification. (PWD SR 2023-24, Vol. 02 Item Code: 15.4) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 994.56 | 994.56 | 71.0 | False | None | None | False | None | False | 70613.76 | 0 | | 2384671 | 70934 | None | Vol.2, 8.12 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.12) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 71.68 | 71.68 | 2.0 | False | None | None | False | None | False | 143.36 | 0 | | 2384672 | 70934 | None | Vol.1, 13.37 | Cutting of holes upto 15 x15 cm in RCC floors and roofs for passing drain pipes etc and rapairing the hole after insertion of drain pipe etc with cement mortor 1:2:4 (1 cement 2: coarse sand 4: graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. (PWD SR 2023-24, Vol. 01 Item Code: 13.37) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 350.56 | 350.56 | 19.0 | False | None | None | False | None | False | 6660.64 | 0 | | 2384673 | 70934 | None | Vol.2, 14.40.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (PWD SR 2023-24, Vol. 02 Item Code: 14.40.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 555.52 | 555.52 | 79.0 | False | None | None | False | None | False | 43886.08 | 0 | | 2384674 | 70934 | None | Vol.2, 13.4.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. (PWD SR 2023-24, Vol. 02 Item Code: 13.4.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 614.88 | 614.88 | 24.0 | False | None | None | False | None | False | 14757.12 | 0 | | 2384675 | 70934 | None | Vol.2, 13.31.5 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge Internal work - Exposed on wall - 40mm nominal dia pipes (PWD SR 2023-24, Vol. 02 Item Code: 13.31.5) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 600.31 | 600.31 | 335.0 | False | None | None | False | None | False | 201103.85 | 0 | | 2384676 | 70934 | None | Vol.2, 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (PWD SR 2023-24, Vol. 02 Item Code: 14.31) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1366.4 | 1366.4 | 45.0 | False | None | None | False | None | False | 61488.0 | 0 | | 2384677 | 70934 | None | Vol.2, 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (PWD SR 2023-24, Vol. 02 Item Code: 13.59) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 246.4 | 246.4 | 120.0 | False | None | None | False | None | False | 29568.0 | 0 | | 2384678 | 70934 | None | Vol.2, 13.22.1.1 | Providing and fixing PTMT grating of approved quality and colour 100 mm nominal dia (PWD SR 2023-24, Vol. 02 Item Code: 13.22.1.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 45.92 | 45.92 | 120.0 | False | None | None | False | None | False | 5510.4 | 0 | | 2384679 | 70934 | None | Vol.2, 13.32.2 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work, including cutting chases & making good the walls etc. - 20mm nominal dia pipes (PWD SR 2023-24, Vol. 02 Item Code: 13.32.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 424.48 | 424.48 | 200.0 | False | None | None | False | None | False | 84896.0 | 0 | | 2384680 | 70934 | None | Vol.2, 13.31.3 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge - 25mm nominal dia pipes (PWD SR 2023-24, Vol. 02 Item Code: 13.32.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 534.24 | 534.24 | 500.0 | False | None | None | False | None | False | 267120.0 | 0 | | 2384681 | 70934 | None | Vol.2, 13.31.4 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge Internal work - Exposed on wall - 32mm nominal dia pipes (PWD SR 2023-24, Vol. 02 Item Code: 13.31.4) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 448.0 | 448.0 | 590.0 | False | None | None | False | None | False | 264320.0 | 0 | | 2384682 | 70934 | None | Vol.2, 13.4.3 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore (PWD SR 2023-24, Vol. 02 Item Code: 13.4.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 786.24 | 786.24 | 11.0 | False | None | None | False | None | False | 8648.64 | 0 | | 2384683 | 70934 | None | Vol.2, 13.34 | Providing and placing on terrace(at all floor levels), polyethylene water storage tanks, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (PWD SR 2023-24, Vol. 02 Item Code: 13.34) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Ltr | 10.08 | 10.08 | 34000.0 | False | None | None | False | None | False | 342720.0 | 0 | | 2384684 | 70934 | None | Vol.2, 13.5.3 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (PWD SR 2023-24, Vol. 02 Item Code: 13.5.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 371.84 | 371.84 | 15.0 | False | None | None | False | None | False | 5577.6 | 0 | | 2384685 | 70934 | None | Vol.2, 13.20.2 | Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms (PWD SR 2023-24, Vol.02 Item Code: 13.20.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 351.68 | 351.68 | 25.0 | False | None | None | False | None | False | 8792.0 | 0 | | 2384686 | 70934 | None | Vol.2, 13.18.1 | Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g. (PWD SR 2023-24, Vol. 02 Item Code: 13.18.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 137.55 | 137.55 | 26.0 | False | None | None | False | None | False | 3576.3 | 0 | | 2384687 | 70934 | None | Vol 5 I No 13.9.1 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments. 3.00 HP/2.2KW, 9 STG(PWD SR 2023-24, Vol. 0 Item Code: 13.9.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 22526.56 | 22526.56 | 2.0 | False | None | None | False | None | False | 45053.12 | 0 | | 2384688 | 70934 | None | Vol 5 I No 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. (PWD SR 2023-24, Vol. 05 Item Code 16.9). ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 6108.48 | 6108.48 | 32.0 | False | None | None | False | None | False | 195471.36 | 0 | | 2384689 | 70934 | None | Vol 5 I No 7.3 | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Nos | 2224.8 | 2224.8 | 34.0 | False | None | None | False | None | False | 75643.2 | 0 | | 2384690 | 70934 | None | Vol 2 I No 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (PWD SR 2023-24, Vol. 02 Item Code:14.1.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5470.08 | 5470.08 | 49.0 | False | None | None | False | None | False | 268033.92 | 0 | | 2384691 | 70934 | None | Vol 2 I No 14.2.2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid (PWD SR 2023-24, Vol. 02 Item Code: 14.2.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5415.2 | 5415.2 | 20.0 | False | None | None | False | None | False | 108304.0 | 0 | | 2384692 | 70934 | None | Vol 2 I No 14.25.1 | Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings : Flat back wash basin of size 630x450 mm. (PWD SR 2023-24, Vol. 02 Item Code: 14.25.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1104.32 | 1104.32 | 40.0 | False | None | None | False | None | False | 44172.8 | 0 | | 2384693 | 70934 | None | Vol 2 I No 14.10.1.3 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm (PWD SR 2023-24, Vol. 02 Item Code: 14.10.1.3) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5531.68 | 5531.68 | 8.0 | False | None | None | False | None | False | 44253.44 | 0 | | 2384694 | 70934 | None | Vol.5, I No 13.50.8 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia Pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 754.88 | 754.88 | 220.0 | False | None | None | False | None | False | 166073.6 | 0 | | 2384695 | 70934 | None | Vol.5, I No 13.50.9 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 1041.6 | 1041.6 | 575.0 | False | None | None | False | None | False | 598920.0 | 0 | | 2384696 | 70934 | None | Vol.5, I No 13.50.10 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal dia Pipes ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Mtr | 1784.16 | 1784.16 | 215.0 | False | None | None | False | None | False | 383594.4 | 0 | | 2384697 | 70934 | None | Vol.5, I No 16.15.6 | Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H Machinehole 1.2 m internal dia. , 1.5M depth & SFRC cover & frame ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 39986.72 | 39986.72 | 25.0 | False | None | None | False | None | False | 999668.0 | 0 | | 2384698 | 70934 | None | 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 4988.48 | 4988.48 | 18.0 | False | None | None | False | None | False | 89792.64 | 0 | | 2384699 | 70934 | None | 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 5691.84 | 5691.84 | 3.0 | False | None | None | False | None | False | 17075.52 | 0 | | 2384700 | 70934 | None | Vol.2, I No 5.7 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. As per the direction of Engineer Incharge. (PWD SR 2023-24 Vol. 02 Item Code: 5.7) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 7565.6 | 7565.6 | 52.0 | False | None | None | False | None | False | 393411.2 | 0 | | 2384701 | 70934 | None | Vol.2, I No 11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (PWD SR 2023-24 Vol. 02 Item Code 11.34.A) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 188.16 | 188.16 | 84.0 | False | None | None | False | None | False | 15805.44 | 0 | | 2384702 | 70934 | None | Vol.2, I No 12.88 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). As per the direction of Engineer Incharge. (PWD SR Vol.02 Item Code: 12.88) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 6036.8 | 6036.8 | 3.0 | False | None | None | False | None | False | 18110.4 | 0 | | 2384703 | 70934 | None | Vol.2, I No 11.5.1 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 2023-24 Vol. 02 Item Code 11.5.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 5015.36 | 5015.36 | 2.0 | False | None | None | False | None | False | 10030.72 | 0 | | 2384704 | 70934 | None | Vol.2, I No 11.2 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 2023-24, Vol. 02 Item Code: 11.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 126.56 | 126.56 | 7638.0 | False | None | None | False | None | False | 966665.28 | 0 | | 2384705 | 70934 | None | Vol.2, I No 11.57.2 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (PWD SR 2023-24, Vol. 02 Item Code: 11.57.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kg | 126.56 | 126.56 | 188.0 | False | None | None | False | None | False | 23793.28 | 0 | | 2384706 | 70934 | None | Vol.2, I No 7.38 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(PWD SR 2023-24, Vol. 02 Item Code: 7.38) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 636.16 | 636.16 | 256.0 | False | None | None | False | None | False | 162856.96 | 0 | | 2384707 | 70934 | None | Vol.2, I No 7.39.1 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) .(PWD SR 2023-24, Vol. 02 Item Code: 7.39.1) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 505.12 | 505.12 | 18.0 | False | None | None | False | None | False | 9092.16 | 0 | | 2384708 | 70934 | None | Vol.2, I No 8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code 8.8) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 415.52 | 415.52 | 85.0 | False | None | None | False | None | False | 35319.2 | 0 | | 2384709 | 70934 | None | Vol.2, I No 8.1.2 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(PWD SR 2023-24, Vol. 2 Item Code : 8.1.2) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 269.92 | 269.92 | 120.0 | False | None | None | False | None | False | 32390.4 | 0 | | 2384710 | 70934 | None | Vol.2, I No 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol.02 Item Code: 8.9) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 431.2 | 431.2 | 120.0 | False | None | None | False | None | False | 51744.0 | 0 | | 2384711 | 70934 | None | Vol.2, I No 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR Volume 2 Item code :8.25) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 153.44 | 153.44 | 120.0 | False | None | None | False | None | False | 18412.8 | 0 | | 2384712 | 70934 | None | Vol.2, I No 15.4 | Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 400% and having solid content of above 90% @ 1.6kg/m2 in 2 coats to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification. (PWD SR 2023-24, Vol. 02 Item Code: 15.4) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 994.56 | 994.56 | 116.0 | False | None | None | False | None | False | 115368.96 | 0 | | 2384713 | 70934 | None | Vol.2, I No 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, Vol. 02 Item Code: 8.40) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 128.8 | 128.8 | 38.0 | False | None | None | False | None | False | 4894.4 | 0 | | 2384714 | 70934 | None | Vol.2, I No 13.5 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.(6kg 160mm Dia ) (PWD SR Volume 5 Item code : 13.5 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 670.88 | 670.88 | 50.0 | False | None | None | False | None | False | 33544.0 | 0 | | 2384715 | 70934 | None | Vol 2, 411 | Granite stone slab 100 mm and 150 mm thick (un-dressed) As per the direction of Engineer Incharge. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 604.8 | 604.8 | 66.0 | False | None | None | False | None | False | 39916.8 | 0 | | 2384716 | 70934 | None | data rate | Supplying , installing , testing , commissioning of bar screen to exclude the large sized particles with associated set of guide angles in MS flat of 6.0 mm thick and 50 mm wide kept inclined at 45 degree. Size : 600 x 600 ( MS Construction ) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 23580.2 | 23580.2 | 1.0 | False | None | None | False | None | False | 23580.2 | 0 | | 2384717 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Raw Sewage Pump (Centrifugal/Submersible).The pump shall be coupled to the adequate HP , electric motor , mounted on a common base frame (1W + 1S) Make: Kirloskar/Johnson/Lubi Duty: 10 KLH @ 6-10 M head. (1W+1S) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 52250.0 | 52250.0 | 2.0 | False | None | None | False | None | False | 104500.0 | 0 | | 2384718 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Coarse bubble diffusers 90 dia x 800mm long UPVC pipe grid with necessary orifices suitable for 6.0 kg/cm2 pressure rating to provide clog-free oxygen.Make : Scogen / Eqv ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 6613.2 | 6613.2 | 8.0 | False | None | None | False | None | False | 52905.6 | 0 | | 2384719 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Fine bubble diffusers 90 dia x 1000mm long with the membrane from SCOGEN shall consists of set of membranes , SS 304 clips , nylon rope braided hose with all accessories to make it retrievable.Make : Scogen / Eqv ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 9790.0 | 9790.0 | 12.0 | False | None | None | False | None | False | 117480.0 | 0 | | 2384720 | 70934 | None | data rate | Supplying , installing , testing , commissioning of approved make Twin Lobe roots type air blower of adequate capacity at 0.5 kg/cm2 capacity of required head comprising of common base frame , suction filter , suction silencer , non return , V belt , safety valve , belt guard , drive and driven pulleys , pressure gauge , inter connection piping , discharge silencer including required motor. Make : KAY International/A1/Everest. Duty: 100 M3 /hr @ 0.5 KG/CM2 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 242738.1 | 242738.1 | 2.0 | False | None | None | False | None | False | 485476.2 | 0 | | 2384721 | 70934 | None | data rate | Supplying , installing , testing , commissioning of sludge disposal pumps to pump the sludge from SBR tank to sludge holding tank with wetted parts in CI construction. The pump shall be coupled to the adquate H.P electrical motor , mounted on a base frame. Make: Kirloskar/Johnson/Lubi. Duty: 10 KLH @10 M head. (1W) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 52250.0 | 52250.0 | 1.0 | False | None | None | False | None | False | 52250.0 | 0 | | 2384722 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Filter Feed Pump consisting of Submersible type filter feed pumps to feed semi treated water to secondary treatment process through the filters.The pump shall be coupled to the adequate HP electrical motor , mounted on a common base frame . Make:Kirloskar/Johnson/Lubi. Duty: 30 KLH @ 30 M head. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 44386.1 | 44386.1 | 2.0 | False | None | None | False | None | False | 88772.2 | 0 | | 2384723 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Chlorine Dosing System consisting of Dosing pump and 100 ltrs Solution Tank having detachable lid with molded inserts for mounting of pump .Make: E-Dose Capacity :0 - 6lph (1w ) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 34860.1 | 34860.1 | 1.0 | False | None | None | False | None | False | 34860.1 | 0 | | 2384724 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Pressure Sand filter for filtration of treated sewage. The filter shall be made of MS with epoxy painting with first charge of media, frontal face piping and multiport valves. Size : 800 mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 279417.6 | 279417.6 | 1.0 | False | None | None | False | None | False | 279417.6 | 0 | | 2384725 | 70934 | None | data rate | Supplying , installing , testing , commissioning of Activated Carbon filter for filtration of treated sewage, The filter shall be made of MS with epoxy painting with first charge of media, frontal face piping and multiport valves. Size : 800 mm dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 305984.5 | 305984.5 | 1.0 | False | None | None | False | None | False | 305984.5 | 0 | | 2384726 | 70934 | None | data rate | Supply , fixing , testing & commissioning of automatic PLC decant valve for suitable dia with auto electrical operated with isolation ( butterfly valve ) at suitable time as required opening & Closing automatically cost including all pipes with necessary fittings , electrical connection wiring etc complete. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 104500.0 | 104500.0 | 1.0 | False | None | None | False | None | False | 104500.0 | 0 | | 2384727 | 70934 | None | data rate | Plant Piping with UPVC of 10 Kg/sqcm pipes with fittings and approved make valves, gauges, instrumentation etc., for all plumbing lines and MS B Class pipeline with fittings for Blower Air Lines ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Lot | 225441.9 | 225441.9 | 1.0 | False | None | None | False | None | False | 225441.9 | 0 | | 2384728 | 70934 | None | data rate | Supplying , installing , testing , commissioning of STP Treated Water transfer pump.The pump shall be submersible type coupled to the adequate HP electrical motor. Make:Kirloskar. Duty: 6 KLH @ 30 M head. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 48349.4 | 48349.4 | 1.0 | False | None | None | False | None | False | 48349.4 | 0 | | 2384729 | 70934 | None | data rate | Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin proof Panel (Indoor non compartmental type) with IP 54 ingress protection, fabricated from 2 mm thick CRCA sheets, with hinged, gasketted and lockable doors including the cost of interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system with 16 KA rupturing capacity at 415 volts complete. Electrical Motor Control Centre shall be suitable for all equipments connected to the STP with 2 No of spare feeders ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 289334.4 | 289334.4 | 1.0 | False | None | None | False | None | False | 289334.4 | 0 | | 2384730 | 70934 | None | data rate | Inter unit cabling for all equipments with necessary armoured/ unarmoured cables with necessary termination lugs, glands etc complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Lot | 69082.2 | 69082.2 | 1.0 | False | None | None | False | None | False | 69082.2 | 0 | | 2384731 | 70934 | None | data rate | Maintainance Charges including Man power required during maintainance period( Rs 12500/month for 12 Months) for 1 shift and Consumables required for functioning and maintainance of 50KLD Sewage Treatment Plant ( Rs 2500/- per month for 12 Months) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Month | 16500.0 | 16500.0 | 12.0 | False | None | None | False | None | False | 198000.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | GOODS(KUJALLI) | 10208018.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384732 | 70935 | None | data rate | Two tier cot to MDRS/KRCRS / P U MDRS
Size: 1980L X 760W X 1980mmH. The verticals shall be made out of 38mm square MS tubes of 16G thick on all the four corners & 19mm square MS tubes in-between. A single CRCA sheet of 14G thick and uniformly bent on all sides vertically and further inside and with one lengthwise rib of 18G in the middle underneath for both the cots shall be provided. For the upper cot 25mm dia pipe to be bent and fixed in the middle on either sides as obstacle to avoid dropping of the person while sleeping to the side. The height for bottom tier from the floor shall be 460mm. The distance between bottom tier and top tier shall be 1000mm. The ladder shall be provided on one side to enable the person to climb to upper tier. Curtain hooks at the top corners for both the cots shall be welded for tying mosquito curtains. Strong rubber bushes shall be fixed for the verticals at the bottom. The entire cot shall be neatly de rusted, powder coated with epoxy polyesterpowder. Name of the institution i.e., KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 14950.0 | 14950.0 | 125.0 | False | None | None | False | None | False | 1868750.0 | 0 | | 2384733 | 70935 | None | data rate | Desk cum Bench
Dimensions: Size : 1800 (L) * 787 (W) * 787mm (H)
Specification: Made using 25mm*25mm & 25mm*50mm 16g MS ERW tubular section frame & book shelf of 20 swg CRCA sheet, fitted with 25mm thick PLPB & 2mm thick PVC edge binding for all the exposed edges for sitting & writing planks & 18mm thick PLPB for back rest planks respectively. The desk frame shall be epoxy powder coated upto 40microns with siemens grey colour.
Part Details:-
1) Writing Plank: Size: 1800 Mm(L) * 355mm(W)*25mm(T)
2) Sitting Plank: Size: 1800 Mm(L) * 305mm(W)*25mm(T)
3) Backrest Plank: Size: 1800 Mm(L) * 203mm(W)*18mm(T)
4) Book Shelve: Made Out Of MS 20swg. Name of the institution i.e, KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 12600.0 | 12600.0 | 62.0 | False | None | None | False | None | False | 781200.0 | 0 | | 2384734 | 70935 | None | data rate | Steel Almirah plain with shelves &Door 6.6 Feet with 20 Guage doors & 22 Guage body.
Size : 198cm H x 915cm W x 48cm D (including leg of 15.24cm) ,
fitted with four fixed shelves making five compartments with double door with three way locking device and duplicate keys, all joints outside and inside should be spot or co2 welded and neatly finished by sandering. The outside corners should be rounded off to give good appearance. The edges of doors and shelves should be properly bent to U shape of 25mm width to ensure good strength and the outer edge of U bent of the door length wise should be double folded and neatly finished. The shelves front side should be bent to U shape neatly and finished to avoid any possible cuts to fingers and hand when handled. Longitudinal rib of 15.24cm wide including bent to required shape should be provided and fixed to each door at its centre. The breadth of the shelf in the Almirah should be to the entire width leaving above 12mm gap from the shutter when it is closed. Locking Device: Three ways locking device with 10 Gauge M.S. sheet for locking and lever plate, and with locking rod of 10mm dia with strong bracket at top and bottom to hold the locking rod with six lever lock should be provided. 65mm size 6 lever strong lock to be fixed. Handle should be made out of cast alloy with nickel chrome plated. The entire almirah shall be derusted, powder coated with epoxy polyester powder Name of the institution i.e, KREIS should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 21823.0 | 21823.0 | 12.0 | False | None | None | False | None | False | 261876.0 | 0 | | 2384735 | 70935 | None | data rate | S Type continuous armrest chair:
SEAT/BACK ASSEMBLY: The seat and back are made from well seasoned& polished wood. CANE FOR SEAT/BACK: Cane is made from mix of LDPE+HDPE MIX material. The caning used for seat/back shall have high tensile strength. ARMREST TUBE: The armrest tube is made of MS ERW tube of dia.2.54cm x 16G thick and powder coated. The armrest is gas-assisted injection moulded from black polypropylene. Name of the institution i.e, KREIS should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 3492.0 | 3492.0 | 25.0 | False | None | None | False | None | False | 87300.0 | 0 | | 2384736 | 70935 | None | data rate | Staff Table
Size: 1365mm W X 680mm D X 750mm H the Table Top work surface to be manufactured using 25mm thick pre laminated particle board (PLPB). All work surface edges are to be duly sealed with 2mm thick PVC edge banding. The understructure C- frame to be made using CRCA MS sheet 20 gauge Thick and Tubular Frame to be made using MS ERW Square Tube with dia 25.4 mm X 1.2mm Thick. The MS ERW Square Tubes: 25.4 mm X 25.4mm X 1.2mm Thickness. The modesty panel is to be made using 20 gauge thick CRCA MS sheet. The table should contain 1 drawer & cupboard unit to the left hand side and 3 drawer units on the right hand side of the table. The metal drawer unit with shell made out of 0.5mm thick CRCA sheet and MS Drawer Tray made out of 0.5mm Thick CRCA MS sheet and the drawer facia to be made out of 22 gauge Thick CRCA sheet. The drawer to be provided with MS Lock with 10 Lever Cam Lock. The handles to be fixed made out of Built in Plastic. The table should have connecting leg rest made out of MS tube. The entire table shall be neatly derusted, powder coated with epoxy polyester powder Name of the institution i.e., KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 12990.0 | 12990.0 | 12.0 | False | None | None | False | None | False | 155880.0 | 0 | | 2384737 | 70935 | None | data rate | Shoe Cabinet:
Shoe racks with shelves 8.1ft with uniformly welded 18 gauge pipes for verticals & 16 gauge sheet folded L angles for horizontals and covered with 20guage thick CRCA sheet on top, sides and back. Size 1371H,2463W,381D fitted with pipes consisting of 30 shelvesof size 203H & 381 W in inclined position to stock footwear. The rack will be provided with 4 castors. The entire rack will be derusted, powder coated with epoxy polyster power. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 16810.0 | 16810.0 | 12.0 | False | None | None | False | None | False | 201720.0 | 0 | | 2384738 | 70935 | None | data rate | Class Room Tables:
Under structure: C frame shall be made up of 0.9 +/- 0.09mm thick powder coated 50 microns (+/- 10) CRCA MS. Tubular frame is made up of Sq. 25.4 (+/- 0.3mm) X 1.2 (+/- 0.096mm) Thick MS ERW tube. The modesty panel is made up from 1.0 (+/- 0.09mm) thick powder coated 50 microns (+/- 10mm) CRCA MS. The work surface shall be made up of 18 (+/-0.5mm ) thick pre laminated particle board as per with 2 mm thick PVC edge banding on all sides.
Shell of the storage unit shall be made up of 0.5 (+/-0.07mm) thick CRCA steel. The drawer tray shall be made up of 0.5 (+/-0.07mm) thick CRCA steel. Drawer front shall be made up of 0.8 (+/- 0.1mm ) thick CRCA steel. Lock shall be of 10 lever cam lock. Handles shall be of plastic handle. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 10480.0 | 10480.0 | 8.0 | False | None | None | False | None | False | 83840.0 | 0 | | 2384739 | 70935 | None | data rate | Library Racks:
a Product Size: Width 900mm, Height: 1850mm, Depth: 300mm (DMX Drg. - PL13-A4-20825 R0)
b. Construction: Rigid Knockdown construction.
c. Material: CRCA 0.8mm Thickness
d Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-1)
e. Number of Adjustable shelf: Five adjustable shelves (Total 6 Loading levels). Uniformly Distributed Load Capacity per each shelf shall be 80 Kg maximum.
f. Shelf back stiffener At the rear side of the shelves back stiffeners are provided. These act as separators between front & rear books.
g. Label holder & range indicator Label Holder & Range indicator on each main unit for inserting labels.
h. Accessories: Optional stand of 125 mm Height with levelling screws. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 15416.0 | 15416.0 | 10.0 | False | None | None | False | None | False | 154160.0 | 0 | | 2384740 | 70935 | None | data rate | PLATE & TUMBLER STAND: 125 plates
Supply of plate & tumbler stand with heavy duty wheels of size 8ft W x 2ft D x 6ft H to stack plates in five rows and tumblers in two rows as per Drawing. MS powder coated to60 microns welded main frame 25mmx50mmx2mm rectangular tubes vertically and horizontally with 6mm rod spaced 1.5 INCH vertically to stack plates individually. Tumbler stand made of 2mm thick MS sheet powder coated to 60 microns on either side with holes to insert tumblers all as directed by the engineer in charge and sample to be approved before supply. The entire stand shall be neatly derusted, powder coated with epoxy polyester powder. Name of the institution i.e., KREIS Should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 15000.0 | 15000.0 | 2.0 | False | None | None | False | None | False | 30000.0 | 0 | | 2384741 | 70935 | None | data rate | Smart Class :-
Projector with Integrated Computer and other accessories with 1 year Onsite Service Warranty
Video Conferencing Software for the above integrated Computer system
Virtual Classroom Software for the integrated Computer system
Ceiling mount kit for the Projector system
USB extenders with 5 meter cable length for fixing to Projector system
Antiglare White Board
Server System
Content Access Software and 3D Virtual Interactive experiments
Desktops for students (15 x 1 Locations)
Headsets
Audio Splitter
USB Keyboard and Optical Mouse
Installation charges of all equipments, including fixing the white board and ceiling mount kit, Internal wiring of LAN, Networking of computers, projector and server system
Warranty of 1 year onsite, comprehensive end-to-end AMC for the hardwares and softwares with visit to schools every 3 months with successful utilization report from vendor
Training Cost
2 days divisional level hands on and assignment based training for 2 teachers
Providing Onsite Warranty and AMC Support for all the hardware and software with visit to schools every 3 months with successful utilization report from vendor :
4 years
Portable Electronic equipment insurance as per the specification for 1 Year
Renewal charges of Portable Electronic equipment insurance for Server System - 1 No., Desktop Computer system 15 Nos., provided for usage by students, Projector System with integrated PC 1 No., including Physical loss / theft for a period of 4 Years
Name Boards and Instruction sheet for E-Learning Centre
Supplying and drawing of UTP 6E LAN cable
Computer Table for E- learning centre
Computer chair with armrest for E-learning centre
Supplying and fixing of 2 meters Cat 6 Patch cable (272 + 85)
Supplying and fixing of 9 U with 650 mm depth switch mounting rack with power manager and cable manager as standard specification
Supplying and fixing of I/O socket with back box
Supplying and fixing of Network switches 24 port
Supplying and fixing of Patch panel for LAN cabling 24 port ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 2646000.0 | 2646000.0 | 1.0 | False | None | None | False | None | False | 2646000.0 | 0 | | 2384742 | 70935 | None | data rate | Mattress type : Pocket Spring Mattresses 1. Mattress Size 189 x 67 x 15 cm (29099 Numbers)
&
176 x 74 x 15 cm (3275 Numbers)
2. Coil Count 189 x 67 x 15 cm= 28X 10
176 x 74 x 15 cm =26X 9
3. Construction a) 120mm high pocket spring (dia) core covered with 5mm cotton felt & plastic mesh from top & bottom
b) Entire pocket spring core surrounded by border of 75mm shorter side and 84 mmlonger side made out of 28 density hard foam
c) Above this core 10mm or 12mm (thickness) 28 density P.U foam pasted on top.
d) Above final carcass covered with 20 to 24mm 18density P.U foam quilted fabric from top and bottom
4. Raw Material Specification 1. Spring Coil with 1.8mm dia 5 turns, dia of the spring 55 mm, Flexibility 2.7, Hardness IS 4454 grade part- 2,2003. Spring Material carbonised steel of grade IS-4453 part-1, 2001 & the centre to centre distance of spring 60mm.
2.Spring Coil is pocketed with 80 GSM white Non woven fabric.
Fabric type - 130 GSM Knitted
Cotton felt - (1000 GSM)
Air Vents - 4 nos.
individually packed and sealed with LDPE 80 microns
Corner fitments - 3 Ply corrugated corner guards to prevent any transit damage
Tensile strength 170kg/sq mm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 5000.0 | 5000.0 | 250.0 | False | None | None | False | None | False | 1250000.0 | 0 | | 2384743 | 70935 | None | data rate | Pillow Specification
Fibers 50:50 recycled & hollow
Fiber Weight 500 Grm
Fabric Peach polyester 85Gsm and one cotton pillow cover
Packing LDPE 250 Gauge
Size 17''x27'' recorn pack of 1 pillow ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 400.0 | 400.0 | 250.0 | False | None | None | False | None | False | 100000.0 | 0 | | 2384744 | 70935 | None | data rate | Zamkana
Width 91 CMs+/- 2cms
Color fatness to washing 2-3 or better
Weight/piece 1000 Grm+/-5%
Count warp 2/30 to 2/34s +/ -10%
Weft 25 to 6s +/-10%
Composition Polyster,viscose,cotton
Length 198 Cms +/- 2 cm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 315.0 | 315.0 | 250.0 | False | None | None | False | None | False | 78750.0 | 0 | | 2384745 | 70935 | None | data rate | Bed Spread
Width 147 CMs+/- 2cms
Color fatness to washing 2-3 or better
Weight/piece 600 Grm+/-5%
Count warp 8s to 12s +/ -10%
Weft 2s to 6s +/-10%
Composition Polyster,viscose,cotton
Length 198 Cms +/- 2 cm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 147.0 | 147.0 | 250.0 | False | None | None | False | None | False | 36750.0 | 0 | | 2384746 | 70935 | None | data rate | Bed Sheet
Width 147 CMs+/- 2cms
Color fatness to washing 2-3 or better
Weight/piece 1000 Grm +/-5%
Count warp 2/18s to 2/20s +/ -10%
Weft 6s to 10s +/-10%
Composition Polyster,viscose,cotton
Length 223Cms +/- 2 cm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 420.0 | 420.0 | 250.0 | False | None | None | False | None | False | 105000.0 | 0 | | 2384747 | 70935 | None | data rate | Suppying & Installing reputed brand 55 inch LED TV with android supports. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 75000.0 | 75000.0 | 2.0 | False | None | None | False | None | False | 150000.0 | 0 | | 2384748 | 70935 | None | data rate | Mosquito net
GSM-min 28, colour-white,Typing loop-6 loops,polyolefin 100, Tolerance limit+-10% for all above parameters ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 582.0 | 582.0 | 250.0 | False | None | None | False | None | False | 145500.0 | 0 | | 2384749 | 70935 | None | data rate | Supply and installation of 25 KVA Diesel Generator Set, 3Phase, 1500 RPM
DG Set: Diesel engine and alternator of the same make shall be close coupled and mounted on a base plate of robust construction with standard accessories.
1) DIESEL ENGINE:
a) Diesel Engine shall be air cooled, electric start, developing required B.H.P at 1500 RPM with Class G-2 Governing or better for alternator to deliver specified continuous 25 KVA output as per IS/ISO 8528.
b) The Diesel Engine should be capable of providing 10% overload for one hour for every 12 hours continuous running at full load.
c) Naturally aspirated engines shall conform to IS: 10000-2/81
d) The Diesel Engine shall be complete with the following standard accessories:
i) Fuel tank with capacity for 12 hours continuous running at full load.
ii) Exhaust silencer of Residential type.
iii) 12V or 24V starting system complete with starter motor, charging alternator with Cutout.
iv) Lead Acid Battery/ies of suitable ratings with connecting cables. The battery/ies shall be supplied in charged condition and shall conform to relevant IS Specification.
v) Standard set of tools consisting of a set of 3 spanners, one screw driver, one standard plier and one nose plier of appropriate size shall be provided along with DG sets free of cost for each of DG sets.
2) ALTERNATOR:
a) The Alternator shall be self excited and self regulated of specified KVA rating in three phase at 415 Volt, 50 Hz, 1500 RPM and 0.8 power factor and shall conform to latest IS/ISO Specification and Standards. The alternators shall be of brush less type with VG-1 Grade of voltage regulation.
b) The alternators shall be screen-protected drip proof with Min.IP-21 degree of protection as per latest IS/ISO Specification and Standards. The class of insulation of the Alternator would be 'H'. The rated voltage of Alternator will be 415 V, three phase.
3) MANUAL CONTROL PANEL/INTEGRATED DIGITAL CONTROLLER:
a) The Control Panel shall be fabricated from steel/metal sheet of 1.5 mm thickness minimum duly pretreated and aesthetically finished or integrated with the DG set in the form of Digital Controller.
b) The Control Panel shall be totally enclosed, dust and vermin proof, floor mounted or wall mounted/skid mounted or integral type with IP-53 degree of protection as per latest IS/ISO Specification and Standards.
c) The Control Panel shall have the instrumentation/indicators for speed status, current status, voltage status, Load status, Oil Pressure, low fuel indicator and other operational/safety controls.
4) OPERATION: Manual On-off Push Button Switch on DG set and Change over Switch
5) ACCOUSTIC ENCLOSER
a) DG sets shall be provided with integrated acoustic enclosure which shall conform to norms of Central Pollution Control Board (CPCB) as per updated provision.
b) The acoustic enclosure supplied shall be in accordance with as per latest IS/ISO or equivalent IEC code for conformity to noise norms. This aspect shall also be verified at the time of delivery.
6) PRE-DESPATCH TESTING
a) Supplier shall furnish complete & satisfactory TTC(Type test certificate) for engines, alternators complete with enclosure to be used by them for this rating of DG sets clearly indicating make, model and ratings of the DG sets tested at the time of delivery of the DG set. The TTC of three phase alternators shall cover unbalanced load test as per latest IS/ISO Specification and Standards as applicable. However the engine models/rating shall need relevant certifications as per norms.
b) Either of the following types of TTC shall be acceptable:
i) Type Test Certificate issued by recognized Government Lab.
Type Test Certificate issued by recognized Government Lab irrespective of whether engines and alternators were tested at firm lab or some other lab, but witnessed by Government representative. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 775000.0 | 775000.0 | 1.0 | False | None | None | False | None | False | 775000.0 | 0 | | 2384750 | 70935 | None | data rate | Network Video Recorder: Up to 16 channel IP camera input ,H.265/H.264/MJPEG dual codec decoding, Max 256Mbps incoming bandwidth, Up to 8ch@1080P(4ch@H.265+4ch@H.264) real-time live-view
Up to 12Mp resolution preview playback, HDMI/VGA simultaneous video output, 8/16 channel synchronous real-time playback, GRID interface
Support Multi-brand network cameras, ONVIF Version 2.4 conformance
3D intelligent positioning, Support 2 SATA HDDs up to 12TB, 2 USB(1 USB3.0), Support IPC UPnP, 8PoE ports Support P2P, QR code scan & add
Multiple network monitoring: Web viewer. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 11200.0 | 11200.0 | 1.0 | False | None | None | False | None | False | 11200.0 | 0 | | 2384751 | 70935 | None | data rate | IR Dome camera (Indoor)
"2" Megapixel progressive scan CMOS, varifocal lenses 3.3-12MM or better ,H.264&MJPEG dual-stream encoding, Min 20fps@1080P(1920 1080), Minimum WDR, Day/Night(ICR), 3DNR,AWB,AGC,BLC,Multiplenetwork monitoring: Web viewer, Flexible cropping, On-camera real-time motion detection and privacy mask with 1024 detection zones;Backlight compensation, privacy masking Max. IR LEDs Length20m, IP66, PoE ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 8700.0 | 8700.0 | 5.0 | False | None | None | False | None | False | 43500.0 | 0 | | 2384752 | 70935 | None | data rate | IR Bullet camera (Outdoor - Entrance)
"2" Megapixel progressive scan CMOS, varifocal lenses 3.6-12MM or better, H.264&MJPEG dual-stream encoding, Min20fps@1080P(1920 1080), Minimum WDR, Day/Night(ICR), 3DNR,AWB,AGC,BLC ,Multiple network monitoring: Web viewer, Flexible cropping, On-camera real-time motion detection and privacy mask with 1024 detection zones; Backlight compensation, privacy masking Max. IR LEDs Length20m, IP66, PoE ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 8500.0 | 8500.0 | 3.0 | False | None | None | False | None | False | 25500.0 | 0 | | 2384753 | 70935 | None | data rate | 18.5 Inch Display Monitor ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 9450.0 | 9450.0 | 1.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2384754 | 70935 | None | data rate | STORAGE
Hard disk 4 TB Surveillance Hard Drives - Surveillance Storage is built for 24/7 always-on surveillance in high-definition security systems for the Videos Footages generated by all the Cameras installed within the network for a period of 3 months in case of Boys' Residential Schools and for a period of 6 months in case of Girls' /Co-education Residential Schools.
Off-line Backup: The system should capable of compressing the video footages stored beyond the capacity of online storage capacity of the NVR, and upload the same to Private Cloud Servers via network. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 11800.0 | 11800.0 | 1.0 | False | None | None | False | None | False | 11800.0 | 0 | | 2384755 | 70935 | None | data rate | 6 u server rack with 500 depth wall mounted 1 fan ,1 self and spike card 6 output ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 3500.0 | 3500.0 | 1.0 | False | None | None | False | None | False | 3500.0 | 0 | | 2384756 | 70935 | None | data rate | 8 port 10/100 switch with 4 port POE with more than 50 watts POE budget or 8 port 10/100 switch with 4 port POE with more than 40 watts POE budget ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 9450.0 | 9450.0 | 1.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2384757 | 70935 | None | data rate | RJ 45 Connectors with 4X4" Boxes for Cameras. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 729.0 | 729.0 | 8.0 | False | None | None | False | None | False | 5832.0 | 0 | | 2384758 | 70935 | None | data rate | Power variation controller unit ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 13500.0 | 13500.0 | 1.0 | False | None | None | False | None | False | 13500.0 | 0 | | 2384759 | 70935 | None | data rate | CAT Cable with Including 25 mm Round Pvc White Conduit ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 340.0 | 340.0 | 100.0 | False | None | None | False | None | False | 34000.0 | 0 | | 2384760 | 70935 | None | data rate | Electrical cable to connect all equipments ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 334.0 | 334.0 | 100.0 | False | None | None | False | None | False | 33400.0 | 0 | | 2384761 | 70935 | None | data rate | Dining table: 6 seater
The overall dimensions of the table should be 1800mm(W) X 800mm(D) X750mm(H).The table top should be made of SS-204 grade 1mm thick brush finish stainless steel. The top frame assembly should be rectangular tube of dimensions 50.8mm X 25.4mm X 1.6mm thick MS ERW and cylindrical socket which are welded and powder coated. The side frame assembly should be fixed to the top with screws. The side frame assembly should be made of combination of circular and rectangular tubes of MS ERW. The circular tube should be of diameter 38.1mm and thickness 1.6mm.The rectangular tube should be of dimensions 50.8mm X 25.4mm and thickness 1.6mm.Circular and rectangular tubes should be welded together to form the assembly. Side frame assembly should be fixed to top frame assembly. The stool top should be made SS-204 grade 1mm thick brush finish stainless steel with MS Ribs for strength. The stool top should have an height of 450mm and the diameter of the stool top should be 300mm.The stool assembly should be foldable above the side frame. Cross members should be provided between side frame assembly. Cross members should be made of 50.8mm X 25.4mm X 1.6mm thick MS ERW of 1.6mm thickness and should be powder coated. Finish should be epoxy polyester powder coated of 40-60 micron thickness. Shoe should be provided at the bottom. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 13000.0 | 13000.0 | 32.0 | False | None | None | False | None | False | 416000.0 | 0 | | 2384762 | 70935 | None | data rate | Galvanized Iron Storage Trunks
The GI Steel trunk shall be as per IS 7257:1973 (Reaffirmed 2006) as per the drawing enclosed. The body of the steel trunk shall be made in three panel construction viz. front, bottom and back in one piece and the two sides in two separate pieces. The top portion of the box (Lid cover) is in one piece construction.
Metal: Galvanized Iron
Sheet Thickness: 0.80 mm.
Dimension in mm:675 L X 370 W X 330 D
Padlock: Front, 1 No.
Side Handles: 2 Nos.
Front Handle: 1 No.
1. All joints shall be double seamed.
2. All dimensions in mm.
3. Tolerance L = +/- 5mm, H =+/- 5mm, All other tolerance as per relevant IS.
4. Method of component fixing By riveting.
5. Hasp & Staple size 150mm as per IS 363:1993 (Reaffirmed 2003), type- II.
6. Material: GI Sheet 0.80mm thick to Class 3 of IS : 2771969 2nd revision for
Body, Lid, Cover, Pocket & Channels.
7. Trunk weight Min 11.2 Kgs.
8. Steel Trunk shall be properly cleaned, de-greased, pickled.
9. Name of the institution i.e. KREIS should be embossed on the material. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 1700.0 | 1700.0 | 250.0 | False | None | None | False | None | False | 425000.0 | 0 | | 2384763 | 70935 | None | data rate | Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete 3 KVA ON LINE UPS Each ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 42480.0 | 42480.0 | 2.0 | False | None | None | False | None | False | 84960.0 | 0 | | 2384764 | 70935 | None | data rate | Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150 AH capacity ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 14100.0 | 14100.0 | 12.0 | False | None | None | False | None | False | 169200.0 | 0 |
| | 1706791962000 | 0 | None | None | Buildings | ELECTRICAL WORKS(KUJJALI) | 12326716.17 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2384765 | 70936 | None | 2.6.4 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virgin grade PVC insulation and powder coating xtruded PVC sheathed suitable for working voltage upto 1100Volts as per IS-694:1990. 3C X 6.0Sq.mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 205.0 | 205.0 | 900.0 | False | None | None | False | None | False | 184500.0 | 0 | | 2384766 | 70936 | None | 6.2 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 2999.7 | 2999.7 | 2.0 | False | None | None | False | None | False | 5999.4 | 0 | | 2384767 | 70936 | None | 6.6.2 | Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) - In soil (hard)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 102.0 | 102.0 | 110.0 | False | None | None | False | None | False | 11220.0 | 0 | | 2384768 | 70936 | None | 6.7 | Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 100.0 | 100.0 | 110.0 | False | None | None | False | None | False | 11000.0 | 0 | | 2384769 | 70936 | None | 11.3.5 | Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class - 40mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 498.0 | 498.0 | 24.0 | False | None | None | False | None | False | 11952.0 | 0 | | 2384770 | 70936 | None | 6.10.3 | Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. 25Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 350.0 | 350.0 | 2.0 | False | None | None | False | None | False | 700.0 | 0 | | 2384771 | 70936 | None | 6.17.7 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm Long Barrel
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 20.0 | 20.0 | 16.0 | False | None | None | False | None | False | 320.0 | 0 | | 2384772 | 70936 | None | 5.37 | Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kvar | 400.0 | 400.0 | 10.0 | False | None | None | False | None | False | 4000.0 | 0 | | 2384773 | 70936 | None | 14.15.1 | Fixing a shunt capacitorm of ……KVAR capacity with necessory clamps, bolts and nuts on existing wooden or metal board including banking of more than one capacitor. Up to 5 KVAR
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 210.0 | 210.0 | 4.0 | False | None | None | False | None | False | 840.0 | 0 | | 2384774 | 70936 | None | 6.4.5 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 core 25 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 180.0 | 180.0 | 120.0 | False | None | None | False | None | False | 21600.0 | 0 | | 2384775 | 70936 | None | 6.5.2 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. - 25 sqmm to 75 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 15.5 | 15.5 | 120.0 | False | None | None | False | None | False | 1860.0 | 0 | | 2384776 | 70936 | None | 12.1.1 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )upto 50 mts depth- (2x50=100mtr)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 370.0 | 370.0 | 100.0 | False | None | None | False | None | False | 37000.0 | 0 | | 2384777 | 70936 | None | 12.1.2 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )50-100 mts depth- (2x50=100mtr)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 464.0 | 464.0 | 100.0 | False | None | None | False | None | False | 46400.0 | 0 | | 2384778 | 70936 | None | 12.1.3 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )100-150 mts depth- (2x50=100mtr )
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 493.0 | 493.0 | 100.0 | False | None | None | False | None | False | 49300.0 | 0 | | 2384779 | 70936 | None | 12.1.4 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete )150-200 mts depth- (2x50=100mtr)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 572.0 | 572.0 | 100.0 | False | None | None | False | None | False | 57200.0 | 0 | | 2384780 | 70936 | None | Vol. 05 IC 12.4 | Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5288.0 | 5288.0 | 4.0 | False | None | None | False | None | False | 21152.0 | 0 | | 2384781 | 70936 | None | Vol. 05 IC:13.28 | Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 550.0 | 550.0 | 700.0 | False | None | None | False | None | False | 385000.0 | 0 | | 2384782 | 70936 | None | 13.17.5 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work.12.50 HP - 135 LPM @ 210 m = 15 STG Outlet Dia - 2.00
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 55110.0 | 55110.0 | 2.0 | False | None | None | False | None | False | 110220.0 | 0 | | 2384783 | 70936 | None | Vol. 05 IC: 9.1.1 | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete
(Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 63mm dia"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 189.0 | 189.0 | 900.0 | False | None | None | False | None | False | 170100.0 | 0 | | 2384784 | 70936 | None | Vol. 05 IC: 13.25.2 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 1550.0 | 1550.0 | 4.0 | False | None | None | False | None | False | 6200.0 | 0 | | 2384785 | 70936 | None | Vol. 05 IC: 12.93 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both
ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 1933.0 | 1933.0 | 60.0 | False | None | None | False | None | False | 115980.0 | 0 | | 2384786 | 70936 | None | Vol. 05 IC: 13.24.2 | Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 1450.0 | 1450.0 | 4.0 | False | None | None | False | None | False | 5800.0 | 0 | | 2384787 | 70936 | None | Vol. 05 IC: 12.34 | Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 164.0 | 164.0 | 2.0 | False | None | None | False | None | False | 328.0 | 0 | | 2384788 | 70936 | None | Vol. 05 IC: 12.33 | Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all
amendments"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 150.0 | 150.0 | 16.0 | False | None | None | False | None | False | 2400.0 | 0 | | 2384789 | 70936 | None | Vol 5, I No 10.6 | RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 16401.0 | 16401.0 | 2.0 | False | None | None | False | None | False | 32802.0 | 0 | | 2384790 | 70936 | None | Vol 5, I No 10.7 | Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1882.0 | 1882.0 | 2.0 | False | None | None | False | None | False | 3764.0 | 0 | | 2384791 | 70936 | None | 1.6.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. (PWD SR 2023-24, Vol. 02 Item Code; 1.6.1)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 484.0 | 484.0 | 216.0 | False | None | None | False | None | False | 104544.0 | 0 | | 2384792 | 70936 | None | 6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressivestrength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing,usage charges of machinery etc complete as per specifications and as per the direction of Engineer Incharge(PWD SR 2023-24 Vol. 02 Item Code: 6.32)Pump house platform= (1.5*1.5*1.5=3.0Cum)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 1310.0 | 1310.0 | 6.0 | False | None | None | False | None | False | 7860.0 | 0 | | 2384793 | 70936 | None | 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. As per the direction of Engineer Incharge.(for DPC and Flagging Concrete (PWD SR 2023-24 Vol. 01 Item Code 2.4.1)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 6404.0 | 6404.0 | 0.45 | False | None | None | False | None | False | 2881.8 | 0 | | 2384794 | 70936 | None | 5.42.2 | Fabricating supplying and mounting MS box made out… SWG suitable for floor /wall mounting fully weather proof with provsion for better heat disipation. Provided with hinged front cover, equipped with tamper proof locking arrangmentsw, with suitable size clamps with necesdsary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., comp[lete 16SWG
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sq CM | 0.38 | 0.38 | 15000.0 | False | None | None | False | None | False | 5700.0 | 0 | | 2384795 | 70936 | None | 5.41.2 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50x50x6mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 356.0 | 356.0 | 8.0 | False | None | None | False | None | False | 2848.0 | 0 | | 2384796 | 70936 | None | 5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 505.0 | 505.0 | 3.0 | False | None | None | False | None | False | 1515.0 | 0 | | 2384797 | 70936 | None | 5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 464.0 | 464.0 | 3.0 | False | None | None | False | None | False | 1392.0 | 0 | | 2384798 | 70936 | None | 5.2.1 | Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor.Upto 12.5 HP
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6912.0 | 6912.0 | 1.0 | False | None | None | False | None | False | 6912.0 | 0 | | 2384799 | 70936 | None | 5.3 | Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20 HP capacities.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 805.0 | 805.0 | 1.0 | False | None | None | False | None | False | 805.0 | 0 | | 2384800 | 70936 | None | 5.5.2 | Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.63Amps
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3758.0 | 3758.0 | 1.0 | False | None | None | False | None | False | 3758.0 | 0 | | 2384801 | 70936 | None | 5.37 | Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kvar | 432.0 | 432.0 | 5.0 | False | None | None | False | None | False | 2160.0 | 0 | | 2384802 | 70936 | None | 5.6.6 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20"x20"x2.5"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 315.0 | 315.0 | 1.0 | False | None | None | False | None | False | 315.0 | 0 | | 2384803 | 70936 | None | 5.7.3 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63Amps
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 372.0 | 372.0 | 3.0 | False | None | None | False | None | False | 1116.0 | 0 | | 2384804 | 70936 | None | 5.22 | Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 377.0 | 377.0 | 1.0 | False | None | None | False | None | False | 377.0 | 0 | | 2384805 | 70936 | None | 5.25 | Supplying, fixing and wiring 0 to 100amps Direct Reading AC analog type Ammeter
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 472.0 | 472.0 | 1.0 | False | None | None | False | None | False | 472.0 | 0 | | 2384806 | 70936 | None | 2.3.4 | Wiring for lighting /Popwer Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 694 cofirming to latest amendments. 4 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 59.0 | 59.0 | 15.0 | False | None | None | False | None | False | 885.0 | 0 | | 2384807 | 70936 | None | 2.3.3 | Wiring for lighting /Popwer Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 694 cofirming to latest amendments. 6 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 87.0 | 87.0 | 15.0 | False | None | None | False | None | False | 1305.0 | 0 | | 2384808 | 70936 | None | 6.17.2 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.2.5 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 4.0 | 4.0 | 12.0 | False | None | None | False | None | False | 48.0 | 0 | | 2384809 | 70936 | None | 6.17.3 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.4 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 7.0 | 7.0 | 12.0 | False | None | None | False | None | False | 84.0 | 0 | | 2384810 | 70936 | None | 6.17.4 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 7.0 | 7.0 | 12.0 | False | None | None | False | None | False | 84.0 | 0 | | 2384811 | 70936 | None | 1.2.1 of Part III Utilization (PWD Electrical) | Concealed Conduit System Supplying 19/20 mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 73.92 | 73.92 | 6050.0 | False | None | None | False | None | False | 447216.0 | 0 | | 2384812 | 70936 | None | 1.1.1 of Part III Utilization (PWD Electrical) | Open Conduit System Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 77.28 | 77.28 | 1000.0 | False | None | None | False | None | False | 77280.0 | 0 | | 2384813 | 70936 | None | 1.2.2 of Part III Utilization (PWD Electrical) | Concealed Conduit System Supplying 25 mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 87.36 | 87.36 | 2150.0 | False | None | None | False | None | False | 187824.0 | 0 | | 2384814 | 70936 | None | 1.3.1 of Part III Utilization (PWD Electrical) | Supplying 19/20 dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 76.16 | 76.16 | 3125.0 | False | None | None | False | None | False | 238000.0 | 0 | | 2384815 | 70936 | None | 1.3.2 of Part III Utilization (PWD Electrical) | Supplying 25 mm dia 2mm/2.5mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 397.6 | 397.6 | 980.0 | False | None | None | False | None | False | 389648.0 | 0 | | 2384816 | 70936 | None | 2.1.1 of Part III Utilization (PWD Electrical) | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Short point upto 3m from tapping point to out let via switch box
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 319.2 | 319.2 | 70.0 | False | None | None | False | None | False | 22344.0 | 0 | | 2384817 | 70936 | None | 2.1.2 of Part III Utilization (PWD Electrical) | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Medium point above - 3Mtr up to 6Mtr from tapping point to out let via switch
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 441.28 | 441.28 | 87.0 | False | None | None | False | None | False | 38391.36 | 0 | | 2384818 | 70936 | None | 2.1.3 of Part III Utilization (PWD Electrical) | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Long point above 6Mtr up to 10Mtr from tapping point to out let via switch
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 638.4 | 638.4 | 117.0 | False | None | None | False | None | False | 74692.8 | 0 | | 2384819 | 70936 | None | 2.1.4 of Part III Utilization (PWD Electrical) | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches.
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 792.96 | 792.96 | 178.0 | False | None | None | False | None | False | 141146.88 | 0 | | 2384820 | 70936 | None | 2.1.5 of Part III Utilization (PWD Electrical) | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A, flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Point | 1159.2 | 1159.2 | 78.0 | False | None | None | False | None | False | 90417.6 | 0 | | 2384821 | 70936 | None | 3.4.1 of Part III Utilization (PWD Electrical) | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-3 Way
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 178.08 | 178.08 | 919.0 | False | None | None | False | None | False | 163655.52 | 0 | | 2384822 | 70936 | None | 3.4.2 of Part III Utilization (PWD Electrical) | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 Way
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 198.24 | 198.24 | 211.0 | False | None | None | False | None | False | 41828.64 | 0 | | 2384823 | 70936 | None | 3.4.3 of Part III Utilization (PWD Electrical) | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 Way
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 246.4 | 246.4 | 98.0 | False | None | None | False | None | False | 24147.2 | 0 | | 2384824 | 70936 | None | 3.4.4 of Part III Utilization (PWD Electrical) | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 292.32 | 292.32 | 78.0 | False | None | None | False | None | False | 22800.96 | 0 | | 2384825 | 70936 | None | 3.4.5 of Part III Utilization (PWD Electrical) | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 357.28 | 357.28 | 54.0 | False | None | None | False | None | False | 19293.12 | 0 | | 2384826 | 70936 | None | 3.4.6 of Part III Utilization (PWD Electrical) | Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 16Way
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 406.56 | 406.56 | 32.0 | False | None | None | False | None | False | 13009.92 | 0 | | 2384827 | 70936 | None | 3.5.1 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 1 to 3 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 180.32 | 180.32 | 919.0 | False | None | None | False | None | False | 165714.08 | 0 | | 2384828 | 70936 | None | 3.5.2 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 4 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 196.0 | 196.0 | 211.0 | False | None | None | False | None | False | 41356.0 | 0 | | 2384829 | 70936 | None | 3.5.3 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 6 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 262.08 | 262.08 | 98.0 | False | None | None | False | None | False | 25683.84 | 0 | | 2384830 | 70936 | None | 3.5.4 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 8 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 318.08 | 318.08 | 78.0 | False | None | None | False | None | False | 24810.24 | 0 | | 2384831 | 70936 | None | 3.5.5 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 10 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 385.28 | 385.28 | 54.0 | False | None | None | False | None | False | 20805.12 | 0 | | 2384832 | 70936 | None | 3.5.6 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 12 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 385.28 | 385.28 | 54.0 | False | None | None | False | None | False | 20805.12 | 0 | | 2384833 | 70936 | None | 3.5.7 of Part III Utilization (PWD Electrical) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing metal/PVC box. 16 Module
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 444.64 | 444.64 | 32.0 | False | None | None | False | None | False | 14228.48 | 0 | | 2384834 | 70936 | None | 3.6.1 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps One Way.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 114.24 | 114.24 | 479.0 | False | None | None | False | None | False | 54720.96 | 0 | | 2384835 | 70936 | None | 3.6.2 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two Way.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 185.92 | 185.92 | 70.0 | False | None | None | False | None | False | 13014.4 | 0 | | 2384836 | 70936 | None | 3.6.3 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 191.52 | 191.52 | 479.0 | False | None | None | False | None | False | 91738.08 | 0 | | 2384837 | 70936 | None | 3.6.4 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 'Stepped Fan Regulator.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 399.84 | 399.84 | 188.0 | False | None | None | False | None | False | 75169.92 | 0 | | 2384838 | 70936 | None | 3.6.9 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps Bell Push
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 198.24 | 198.24 | 12.0 | False | None | None | False | None | False | 2378.88 | 0 | | 2384839 | 70936 | None | 3.6.11 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps Universal Socket
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 264.32 | 264.32 | 54.0 | False | None | None | False | None | False | 14273.28 | 0 | | 2384840 | 70936 | None | 3.6.7 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/Stepped electronic fan regulator/ dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 201.6 | 201.6 | 54.0 | False | None | None | False | None | False | 10886.4 | 0 | | 2384841 | 70936 | None | 3.6.12 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone socket
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 174.72 | 174.72 | 42.0 | False | None | None | False | None | False | 7338.24 | 0 | | 2384842 | 70936 | None | 3.6.13 of Part III Utilization (PWD Electrical) | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 RJ45/I.O Outlet Cat-6 Socket
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 377.44 | 377.44 | 18.0 | False | None | None | False | None | False | 6793.92 | 0 | | 2384843 | 70936 | None | 8.2.2 of Part III Utilization (PWD Electrical) | Supplying and drawing PVC flexible two pair telephone unarmoured tinned copper cable. 2
Pair."
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 23.52 | 23.52 | 1290.0 | False | None | None | False | None | False | 30340.8 | 0 | | 2384844 | 70936 | None | 8.3 of Part III Utilization (PWD Electrical) | Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG- 6
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 49.28 | 49.28 | 860.0 | False | None | None | False | None | False | 42380.8 | 0 | | 2384845 | 70936 | None | 8.1 of Part III Utilization (PWD Electrical) | Supplying and drawing UTP-CAT 6E LAN cable
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 38.08 | 38.08 | 60.0 | False | None | None | False | None | False | 2284.8 | 0 | | 2384846 | 70936 | None | 2.3.2 of Part III Utilization (PWD Electrical) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 1.5 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 29.12 | 29.12 | 420.0 | False | None | None | False | None | False | 12230.4 | 0 | | 2384847 | 70936 | None | 2.3.3 of Part III Utilization (PWD Electrical) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 2.5 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 47.04 | 47.04 | 840.0 | False | None | None | False | None | False | 39513.6 | 0 | | 2384848 | 70936 | None | 2.3.4 of Part III Utilization (PWD Electrical) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 4 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 70.56 | 70.56 | 1850.0 | False | None | None | False | None | False | 130536.0 | 0 | | 2384849 | 70936 | None | 2.3.5 of Part III Utilization (PWD Electrical) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 6 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 103.04 | 103.04 | 2600.0 | False | None | None | False | None | False | 267904.0 | 0 | | 2384850 | 70936 | None | 3.10.3 of Part III Utilization (PWD Electrical) | Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws. 110mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 23.52 | 23.52 | 569.0 | False | None | None | False | None | False | 13382.88 | 0 | | 2384851 | 70936 | None | 1.13 of Part III Utilization (PWD Electrical) | Supplying and Fixing Metal Fan Box with Round Hook.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 131.04 | 131.04 | 188.0 | False | None | None | False | None | False | 24635.52 | 0 | | 2384852 | 70936 | None | 12.45 of Part III Utilization (PWD Electrical) | Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 36.96 | 36.96 | 965.0 | False | None | None | False | None | False | 35666.4 | 0 | | 2384853 | 70936 | None | 11.15 of Part III Utilization (PWD Electrical) | Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 943.04 | 943.04 | 19.0 | False | None | None | False | None | False | 17917.76 | 0 | | 2384854 | 70936 | None | 11.11.7 of Part III Utilization (PWD Electrical) | Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 18W, 6500K
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 477.12 | 477.12 | 252.0 | False | None | None | False | None | False | 120234.24 | 0 | | 2384855 | 70936 | None | 11.11.5 of Part III Utilization (PWD Electrical) | Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater then 70%. efficacy greater then 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater then 0.95, power loss should less then 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 12W, 6500K
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 301.28 | 301.28 | 269.0 | False | None | None | False | None | False | 81044.32 | 0 | | 2384856 | 70936 | None | 11.2.1 of Part III Utilization (PWD Electrical) | Supplying & fixing retrofit type-PL- LED Lamp . W LED linear source with CCT 6500 degree K, CRI greater then 70%. efficacy greater then 80 lumen per W, life greater then25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater then 0.95, power loss should less then 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. - 8-9 W
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 697.76 | 697.76 | 48.0 | False | None | None | False | None | False | 33492.48 | 0 | | 2384857 | 70936 | None | 11.3.32 of Part III Utilization (PWD Electrical) | Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater then 80. Power Input: 220-240V@ 50/60Hz & Power factor greater then 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard
electrical condition. - LED light fitting 1 x 4' - 20/22 W
" ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 772.8 | 772.8 | 452.0 | False | None | None | False | None | False | 349305.6 | 0 | | 2384858 | 70936 | None | 13.7.1 of Part III Utilization (PWD Electrical) | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. - On wall / celilin / Rafter / Girders
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 136.64 | 136.64 | 1040.0 | False | None | None | False | None | False | 142105.6 | 0 | | 2384859 | 70936 | None | 6.2.1 of Part III Utilization (PWD Electrical) | Supplying of 1440rpm heavy duty exhaust fan bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12"Sweep(300mm)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3325.28 | 3325.28 | 96.0 | False | None | None | False | None | False | 319226.88 | 0 | | 2384860 | 70936 | None | 13.14 of Part III Utilization (PWD Electrical) | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 551.04 | 551.04 | 96.0 | False | None | None | False | None | False | 52899.84 | 0 | | 2384861 | 70936 | None | 6.4.1 of Part III Utilization (PWD Electrical) | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) - 48"" Sweep 5 Star (1200 mm)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2998.24 | 2998.24 | 188.0 | False | None | None | False | None | False | 563669.12 | 0 | | 2384862 | 70936 | None | 13.10 of Part III Utilization (PWD Electrical) | Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps, ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 191.52 | 191.52 | 188.0 | False | None | None | False | None | False | 36005.76 | 0 | | 2384863 | 70936 | None | 5.6.5 of Part III Utilization (PWD Electrical) | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs
screws. - 15"" x 12"" x 2""
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 225.12 | 225.12 | 5.0 | False | None | None | False | None | False | 1125.6 | 0 | | 2384864 | 70936 | None | 5.7.4 of Part III Utilization (PWD Electrical) | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 100A
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 773.92 | 773.92 | 20.0 | False | None | None | False | None | False | 15478.4 | 0 | | 2384865 | 70936 | None | 5.9.3 of Part III Utilization (PWD Electrical) | Supplying and fixing HRC fuse units base on existing switch / panel board - 100 to 300A
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1029.28 | 1029.28 | 20.0 | False | None | None | False | None | False | 20585.6 | 0 | | 2384866 | 70936 | None | 5.10.2 of Part III Utilization (PWD Electrical) | Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. - Above 63 A to 200 A
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 426.72 | 426.72 | 20.0 | False | None | None | False | None | False | 8534.4 | 0 | | 2384867 | 70936 | None | 5.42.2 of Part III Utilization (PWD Electrical) | Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sq CM | 0.48 | 0.48 | 90000.0 | False | None | None | False | None | False | 43200.0 | 0 | | 2384868 | 70936 | None | 5.40.1 of Part III Utilization (PWD Electrical) | Supplying 100 amps rated 4x30x6mm Alluminium Strips 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing MDB. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete - 100 A 4 x 30 x 6 mm Aluminium Strips
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 2760.8 | 2760.8 | 20.0 | False | None | None | False | None | False | 55216.0 | 0 | | 2384869 | 70936 | None | 3.9 of Part III Utilization (PWD Electrical) | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F screws.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sq CM | 0.39 | 0.39 | 22500.0 | False | None | None | False | None | False | 8775.0 | 0 | | 2384870 | 70936 | None | 5.38 of Part III Utilization (PWD Electrical) | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 576.8 | 576.8 | 15.0 | False | None | None | False | None | False | 8652.0 | 0 | | 2384871 | 70936 | None | 5.31 of Part III Utilization (PWD Electrical) | Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 4916.8 | 4916.8 | 6.0 | False | None | None | False | None | False | 29500.8 | 0 | | 2384872 | 70936 | None | 5.30 of Part III Utilization (PWD Electrical) | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1545.6 | 1545.6 | 8.0 | False | None | None | False | None | False | 12364.8 | 0 | | 2384873 | 70936 | None | 5.21 of Part III Utilization (PWD Electrical) | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 10365.6 | 10365.6 | 5.0 | False | None | None | False | None | False | 51828.0 | 0 | | 2384874 | 70936 | None | 5.11.2 of Part III Utilization (PWD Electrical) | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) - 100A
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 7940.8 | 7940.8 | 4.0 | False | None | None | False | None | False | 31763.2 | 0 | | 2384875 | 70936 | None | 5.15.9 of Part III Utilization (PWD Electrical) | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. - 100A, 25kA, 4 Pole
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9505.44 | 9505.44 | 5.0 | False | None | None | False | None | False | 47527.2 | 0 | | 2384876 | 70936 | None | 5.16 of Part III Utilization (PWD Electrical) | Supplying and fixing of Shunt trip suitable for MCCB.CBCT
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1907.36 | 1907.36 | 5.0 | False | None | None | False | None | False | 9536.8 | 0 | | 2384877 | 70936 | None | 5.34 of Part III Utilization (PWD Electrical) | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 629.44 | 629.44 | 27.0 | False | None | None | False | None | False | 16994.88 | 0 | | 2384878 | 70936 | None | 5.33 of Part III Utilization (PWD Electrical) | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 10432.8 | 10432.8 | 5.0 | False | None | None | False | None | False | 52164.0 | 0 | | 2384879 | 70936 | None | 5.18.9 of Part III Utilization (PWD Electrical) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 63Amps TPN
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3458.56 | 3458.56 | 19.0 | False | None | None | False | None | False | 65712.64 | 0 | | 2384880 | 70936 | None | 5.18.4 of Part III Utilization (PWD Electrical) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 6 - 32Amps DP
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 827.68 | 827.68 | 28.0 | False | None | None | False | None | False | 23175.04 | 0 | | 2384881 | 70936 | None | 5.1 of Part III Utilization (PWD Electrical) | Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 V 1/3 phase motor upto 5 HP.
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2158.24 | 2158.24 | 10.0 | False | None | None | False | None | False | 21582.4 | 0 | | 2384882 | 70936 | None | 5.19.13 of Part III Utilization (PWD Electrical) | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. III- Double Door 12way TP & N
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9783.2 | 9783.2 | 9.0 | False | None | None | False | None | False | 88048.8 | 0 | | 2384883 | 70936 | None | 5.19.10 of Part III Utilization (PWD Electrical) | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. III- Double Door 16way SP & N
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3256.96 | 3256.96 | 8.0 | False | None | None | False | None | False | 26055.68 | 0 | | 2384884 | 70936 | None | 5.18.9 of Part III Utilization (PWD Electrical) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. 50-63Amps TPN
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3458.56 | 3458.56 | 1.0 | False | None | None | False | None | False | 3458.56 | 0 | | 2384885 | 70936 | None | 5.18.7 of Part III Utilization (PWD Electrical) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 5-32Amps TPN
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1923.04 | 1923.04 | 8.0 | False | None | None | False | None | False | 15384.32 | 0 | | 2384886 | 70936 | None | 5.20.10 of Part III Utilization (PWD Electrical) | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.
- 63 A 4 pole
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5764.64 | 5764.64 | 3.0 | False | None | None | False | None | False | 17293.92 | 0 | | 2384887 | 70936 | None | 5.20.4 of Part III Utilization (PWD Electrical) | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.
- 32 to 40 Amps 2 pole "
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5106.08 | 5106.08 | 32.0 | False | None | None | False | None | False | 163394.56 | 0 | | 2384888 | 70936 | None | 5.18.1 of Part III Utilization (PWD Electrical) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. c) 5-32Amps SP
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 464.8 | 464.8 | 312.0 | False | None | None | False | None | False | 145017.6 | 0 | | 2384889 | 70936 | None | 12.56 of Part III Utilization (PWD Electrical) | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 3931.2 | 3931.2 | 10.0 | False | None | None | False | None | False | 39312.0 | 0 | | 2384890 | 70936 | None | 32.18, of Standard Stock Material (11kV System) - | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5 core 240sqmm (2Runs)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 966.19 | 966.19 | 100.0 | False | None | None | False | None | False | 96619.0 | 0 | | 2384891 | 70936 | None | 32.13, of Standard Stock Material (11kV System) - | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5 core 70sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 356.06 | 356.06 | 520.0 | False | None | None | False | None | False | 185151.2 | 0 | | 2384892 | 70936 | None | 32.07, of Standard Stock Material (11kV System) - | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5core 25sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 156.3 | 156.3 | 50.0 | False | None | None | False | None | False | 7815.0 | 0 | | 2384893 | 70936 | None | 32.03, of Standard Stock Material (11kV System) - | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4core 10sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 132.16 | 132.16 | 40.0 | False | None | None | False | None | False | 5286.4 | 0 | | 2384894 | 70936 | None | 21.05, of Labour Charges (11kV System) - Part II D | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 2.5 sqmm to 25 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 23.39 | 23.39 | 40.0 | False | None | None | False | None | False | 935.6 | 0 | | 2384895 | 70936 | None | 21.06, of Labour Charges (11kV System) - Part II D | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 35 sqmm to 95 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 34.88 | 34.88 | 520.0 | False | None | None | False | None | False | 18137.6 | 0 | | 2384896 | 70936 | None | 21.07, of Labour Charges (11kV System) - Part II D | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 120 to 240 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 36.15 | 36.15 | 100.0 | False | None | None | False | None | False | 3615.0 | 0 | | 2384897 | 70936 | None | 1.6.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 542.08 | 542.08 | 45.0 | False | None | None | False | None | False | 24393.6 | 0 | | 2384898 | 70936 | None | 11.2.6 | Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Medium Duty GI pipe of 50mm dia
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 654.08 | 654.08 | 50.0 | False | None | None | False | None | False | 32704.0 | 0 | | 2384899 | 70936 | None | 30.12,of Major Work Materials or EquipmentsPart-I | Supplying and fixing of class B (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class - 100 mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 1512.0 | 1512.0 | 200.0 | False | None | None | False | None | False | 302400.0 | 0 | | 2384900 | 70936 | None | 35.04, of Standard Stock Material (11kV System) - | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 3.5 x 225/240/300 Sqmm
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 658.56 | 658.56 | 2.0 | False | None | None | False | None | False | 1317.12 | 0 | | 2384901 | 70936 | None | 35.02, of Standard Stock Material (11kV System) | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 3.5 x 70/95/120 Sqmm
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 427.84 | 427.84 | 10.0 | False | None | None | False | None | False | 4278.4 | 0 | | 2384902 | 70936 | None | 35.01, of Standard Stock Material (11kV System) | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - Up to 4C x 50 Sqmm
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 362.88 | 362.88 | 12.0 | False | None | None | False | None | False | 4354.56 | 0 | | 2384903 | 70936 | None | 59.10, of Standard Stock Material (11kV System) | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 240 Sqmm Copper Terminal, Apprx Wt: 218 Gm
(Item code 59.10, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 397.6 | 397.6 | 12.0 | False | None | None | False | None | False | 4771.2 | 0 | | 2384904 | 70936 | None | 59.06, of Standard Stock Material (11kV System) | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm
(item code-59.06, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 156.8 | 156.8 | 6.0 | False | None | None | False | None | False | 940.8 | 0 | | 2384905 | 70936 | None | 59.04, of Standard Stock Material (11kV System) - | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm (item code-59.04, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 99.68 | 99.68 | 30.0 | False | None | None | False | None | False | 2990.4 | 0 | | 2384906 | 70936 | None | 59.02, of Standard Stock Material (11kV System) - | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 35 Sqmm Copper Terminal, Apprx Wt: 17 Gm
(item code-59.02, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 44.8 | 44.8 | 10.0 | False | None | None | False | None | False | 448.0 | 0 | | 2384907 | 70936 | None | 59.01, of Standard Stock Material (11kV System) v | Supplying and fixing Heavy Duty Copper Terminal Long Barrel suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 30.24 | 30.24 | 40.0 | False | None | None | False | None | False | 1209.6 | 0 | | 2384908 | 70936 | None | 60.12, of Standard Stock Material (11kV System) - | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 240 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 68.32 | 68.32 | 12.0 | False | None | None | False | None | False | 819.84 | 0 | | 2384909 | 70936 | None | 60.08, of Standard Stock Material (11kV System) | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 120 Sqmm (item code-60.08, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 22.4 | 22.4 | 6.0 | False | None | None | False | None | False | 134.4 | 0 | | 2384910 | 70936 | None | 60.06, of Standard Stock Material (11kV System) - | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 70 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 14.56 | 14.56 | 30.0 | False | None | None | False | None | False | 436.8 | 0 | | 2384911 | 70936 | None | 60.04, of Standard Stock Material (11kV System) - | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 35 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 4.48 | 4.48 | 10.0 | False | None | None | False | None | False | 44.8 | 0 | | 2384912 | 70936 | None | 60.03, of Standard Stock Material (11kV System) - | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 3.36 | 3.36 | 30.0 | False | None | None | False | None | False | 100.8 | 0 | | 2384913 | 70936 | None | 60.02, of Standard Stock Material (11kV System) | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 16 Sqmm(item code-60.02, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2.24 | 2.24 | 10.0 | False | None | None | False | None | False | 22.4 | 0 | | 2384914 | 70936 | None | 60.01, of Standard Stock Material (11kV System) | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 10 Sqmm
(item code-60.01, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2.24 | 2.24 | 8.0 | False | None | None | False | None | False | 17.92 | 0 | | 2384915 | 70936 | None | 63.01, of Standard Stock Material (11kV System) | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25mm dia(63.01, of Standard Stock Material (item code-11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 88.46 | 88.46 | 12.0 | False | None | None | False | None | False | 1061.52 | 0 | | 2384916 | 70936 | None | 63.03, of Standard Stock Material (11kV System) | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 40mm dia (item code-63.03, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 165.76 | 165.76 | 10.0 | False | None | None | False | None | False | 1657.6 | 0 | | 2384917 | 70936 | None | 63.04, of Standard Stock Material (11kV System) | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 45mm dia (item code-63.04, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 220.64 | 220.64 | 4.0 | False | None | None | False | None | False | 882.56 | 0 | | 2384918 | 70936 | None | 12.58.5 of Part III Utilization (PWD Electrical) | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 50 x 6
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 244.16 | 244.16 | 150.0 | False | None | None | False | None | False | 36624.0 | 0 | | 2384919 | 70936 | None | 12.58.3 of Part III Utilization (PWD Electrical) | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 25x6mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 143.36 | 143.36 | 350.0 | False | None | None | False | None | False | 50176.0 | 0 | | 2384920 | 70936 | None | 12.58.2 of Part III Utilization (PWD Electrical) | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 25x3mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 91.84 | 91.84 | 350.0 | False | None | None | False | None | False | 32144.0 | 0 | | 2384921 | 70936 | None | 8.02 of Standard Stock Material (11kV System) | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit systm of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. GI Wire 8SWG (item code-8.02 of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 11.01 | 11.01 | 370.0 | False | None | None | False | None | False | 4073.7 | 0 | | 2384922 | 70936 | None | 19.3, of Major Work Materials or Equipments | Supplying and fixing of DANGER / CAUTION board
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 356.16 | 356.16 | 5.0 | False | None | None | False | None | False | 1780.8 | 0 | | 2384923 | 70936 | None | 5.37, of Part III Utilization (PWD Electrical) | Suplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/400 volts grade, for power factor improvement of roating machinery.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kvar | 537.6 | 537.6 | 17.0 | False | None | None | False | None | False | 9139.2 | 0 | | 2384924 | 70936 | None | 5.3, of Part III Utilization (PWD Electrical) | Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20HP capacities.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1012.5 | 1012.5 | 3.0 | False | None | None | False | None | False | 3037.5 | 0 | | 2384925 | 70936 | None | 5.6.6, of Part III Utilization (PWD Electrical) | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. - 20"x20"x2.5"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 365.27 | 365.27 | 2.0 | False | None | None | False | None | False | 730.54 | 0 | | 2384926 | 70936 | None | 5.1 of Part III Utilization (PWD Electrical) | Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 400/440 volts 3 phase motor/single phase motor upto 5 Hp.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2158.24 | 2158.24 | 6.0 | False | None | None | False | None | False | 12949.44 | 0 | | 2384927 | 70936 | None | 15.117 of Part III Utilization (PWD Electrical) | Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2128.0 | 2128.0 | 20.0 | False | None | None | False | None | False | 42560.0 | 0 | | 2384928 | 70936 | None | 15.117 of Part III Utilization (PWD Electrical) | Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2128.0 | 2128.0 | 20.0 | False | None | None | False | None | False | 42560.0 | 0 | | 2384929 | 70936 | None | 21.08, of Standard Stock Material (11kV System) | Supply and erection of Double Pole TC structural set including all hardwares suitable for 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI
(item code-21.08, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 34377.28 | 34377.28 | 1.0 | False | None | None | False | None | False | 34377.28 | 0 | | 2384930 | 70936 | None | 24.07, of Standard Stock Material (11kV System) - | Supplying and Fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6799.52 | 6799.52 | 1.0 | False | None | None | False | None | False | 6799.52 | 0 | | 2384931 | 70936 | None | 24.01, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, 200 Amps Single Break GOS (item code-24.01, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs)(
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 10584.0 | 10584.0 | 1.0 | False | None | None | False | None | False | 10584.0 | 0 | | 2384932 | 70936 | None | 20.01, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator (item code-20.01, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1197.28 | 1197.28 | 1.0 | False | None | None | False | None | False | 1197.28 | 0 | | 2384933 | 70936 | None | 19.02, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification of BESCOM. - 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
(item code-19.02, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1774.08 | 1774.08 | 1.0 | False | None | None | False | None | False | 1774.08 | 0 | | 2384934 | 70936 | None | 1.02, of Standard Stock Material (11kV System) | Supply and erection of 9 Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM. RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section
(item code-1.02, of Standard Stock Material (11kV System) - Part II Distribution (ESCOMSs))
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9313.92 | 9313.92 | 33.0 | False | None | None | False | None | False | 307359.36 | 0 | | 2384935 | 70936 | None | 2.02, of Standard Stock Material (11kV System) - P | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - 11 kV, Horizontal Cross Arm - Galvanised Iron (GI)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 545.44 | 545.44 | 33.0 | False | None | None | False | None | False | 17999.52 | 0 | | 2384936 | 70936 | None | 2.12, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification BESCOM - HT ST Support 50x8 mm Flat - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 135.52 | 135.52 | 33.0 | False | None | None | False | None | False | 4472.16 | 0 | | 2384937 | 70936 | None | 2.04, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, Special 3 Pin Cross Arm - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1289.12 | 1289.12 | 4.0 | False | None | None | False | None | False | 5156.48 | 0 | | 2384938 | 70936 | None | 5.02, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification - RCC Pole Clamp - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 122.08 | 122.08 | 33.0 | False | None | None | False | None | False | 4028.64 | 0 | | 2384939 | 70936 | None | 9.03, of Standard Stock Material (11kV System) - P | Supplying and fixing of P.G Clamp inluding all Hardware's etc. complete as per the standard technical specification of BESCOM
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 96.32 | 96.32 | 33.0 | False | None | None | False | None | False | 3178.56 | 0 | | 2384940 | 70936 | None | 5.16, of Standard Stock Material (11kV System) | Supplying and Fixing Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator including all Hardwares etc complete as per the standard technical specification of BESCOM
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 791.84 | 791.84 | 18.0 | False | None | None | False | None | False | 14253.12 | 0 | | 2384941 | 70936 | None | 6.06, of Standard Stock Material (11kV System) | Supplying and Fixing ….including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 229.6 | 229.6 | 90.0 | False | None | None | False | None | False | 20664.0 | 0 | | 2384942 | 70936 | None | 5.10,5.11,5.13,5.15, 5.16 & 8.02 of Standard Stock | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1823.86 | 1823.86 | 10.0 | False | None | None | False | None | False | 18238.6 | 0 | | 2384943 | 70936 | None | 2.16, of Labour Charges (11kV System) | Providing Spiral Earth Electrode type earthing (without
charcoal, salt etc.,)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 104.16 | 104.16 | 33.0 | False | None | None | False | None | False | 3437.28 | 0 | | 2384944 | 70936 | None | 2.06 of Standard Stock Material (11kV System) | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - LT 4 Pin Cross Arm - GI
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 424.48 | 424.48 | 4.0 | False | None | None | False | None | False | 1697.92 | 0 | | 2384945 | 70936 | None | 7.02 of Standard Stock Material (11kV System) | Supplying and fixing of Rabbit ACSR
(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 51.58 | 51.58 | 1500.0 | False | None | None | False | None | False | 77370.0 | 0 | | 2384946 | 70936 | None | 6.08 of Standard Stock Material (11kV System) | Supplying and Fixing ….including all Hardwares etc complete as per the standard technical specification BESCOM - No. 15 Strain Insulator
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 66.08 | 66.08 | 20.0 | False | None | None | False | None | False | 1321.6 | 0 | | 2384947 | 70936 | None | 21.08, of Standard Stock Material (11kV System) | Supply and erection of Double Pole TC structural set including all hardwares suitable for 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 34377.28 | 34377.28 | 1.0 | False | None | None | False | None | False | 34377.28 | 0 | | 2384948 | 70936 | None | 24.07, of Standard Stock Material (11kV System) | Supplying and Fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6799.52 | 6799.52 | 1.0 | False | None | None | False | None | False | 6799.52 | 0 | | 2384949 | 70936 | None | 2.12, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification BESCOM - HT ST Support 50x8 mm Flat - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 135.52 | 135.52 | 4.0 | False | None | None | False | None | False | 542.08 | 0 | | 2384950 | 70936 | None | 2.02, of Standard Stock Material (11kV System) | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - 11 kV, Horizontal Cross Arm - Galvanised Iron (GI)
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 545.44 | 545.44 | 2.0 | False | None | None | False | None | False | 1090.88 | 0 | | 2384951 | 70936 | None | 24.01, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, 200 Amps Single Break GOS
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 10584.0 | 10584.0 | 1.0 | False | None | None | False | None | False | 10584.0 | 0 | | 2384952 | 70936 | None | 20.01, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1197.28 | 1197.28 | 1.0 | False | None | None | False | None | False | 1197.28 | 0 | | 2384953 | 70936 | None | 19.02, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification of BESCOM. - 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1774.08 | 1774.08 | 1.0 | False | None | None | False | None | False | 1774.08 | 0 | | 2384954 | 70936 | None | 5.16, of Standard Stock Material (11kV System) | Supplying and Fixing Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator including all Hardwares etc complete as per the standard technical specification of BESCOM
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 791.84 | 791.84 | 6.0 | False | None | None | False | None | False | 4751.04 | 0 | | 2384955 | 70936 | None | 6.06, of Standard Stock Material (11kV System) | Supplying and Fixing ….including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 229.6 | 229.6 | 3.0 | False | None | None | False | None | False | 688.8 | 0 | | 2384956 | 70936 | None | 1.02, of Standard Stock Material (11kV System) | Supply and erection of 9 Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM. RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9313.92 | 9313.92 | 2.0 | False | None | None | False | None | False | 18627.84 | 0 | | 2384957 | 70936 | None | 5.10,5.11,5.13,5.15, 5.16 & 8.02 of Standard Stock | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1823.86 | 1823.86 | 2.0 | False | None | None | False | None | False | 3647.72 | 0 | | 2384958 | 70936 | None | 12.57, of Part III Utilization (PWD Electrical) | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 4766.72 | 4766.72 | 8.0 | False | None | None | False | None | False | 38133.76 | 0 | | 2384959 | 70936 | None | 30.12, of Major Work Materials or Equipments | Supplying and fixing of class B GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class - 100 mm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 1512.0 | 1512.0 | 15.0 | False | None | None | False | None | False | 22680.0 | 0 | | 2384960 | 70936 | None | 25.02, of Standard Stock Material (11kV System) | Supplying and fixing of 11 kV, DOLO Cutout REC Specification(Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018) on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 4749.92 | 4749.92 | 3.0 | False | None | None | False | None | False | 14249.76 | 0 | | 2384961 | 70936 | None | 45.07, of Standard Stock Material (11kV System) | Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOOR JOINTING KIT & conforming to th GTP. OUTDOOR 3cx95sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kit | 4555.04 | 4555.04 | 2.0 | False | None | None | False | None | False | 9110.08 | 0 | | 2384962 | 70936 | None | 45.04, of Standard Stock Material (11kV System) | Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOOR JOINTING KIT & conforming to th GTP.INDOOR 3cx95sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Kit | 4193.28 | 4193.28 | 2.0 | False | None | None | False | None | False | 8386.56 | 0 | | 2384963 | 70936 | None | 36.01, of Standard Stock Material (11kV System) | HT Cable - Supplying and laying of high tension 11KV cable, Dry Curing & Dry Cooling with true triple extrusion, simultaneously through a single common head, 3 core under ground XLPE (E) cable having stranded comapact circular aluminium conductor, screened insulated, insulation screened with extruded semiconduting compound in combination with copper tape, core laid up inner sheate of PVC tape GI flat strip armoured and overall PVC sheathed with specified IS 7098/11/85 with latest amendments of conforming to the GTP . 3 Core x 95 Sqmm, (54 GI Wires - 2.5 mm Dia) (2 Runs)
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 996.43 | 996.43 | 50.0 | False | None | None | False | None | False | 49821.5 | 0 | | 2384964 | 70936 | None | 12.16, of Standard Stock Material (11kV System) | Supply,erection, testing and commissioning of Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 tap switch Butchholtz relay winding Temperature indicator, oil temperature indicator, marshalling box with wiring, magnetic oil level indicator with +5% to-10% Steps of 2.5% with HT and LT cable and boxes including all standard accessories as per latest IS Standard Technical Specification. - 100 kVA, Aluminium Wdg, Star 2 (5 Star) with cable entry type
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 252645.12 | 252645.12 | 1.0 | False | None | None | False | None | False | 252645.12 | 0 | | 2384965 | 70936 | None | 11.59 | Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin- charge. (Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade)"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Sqm | 941.92 | 941.92 | 93.6 | False | None | None | False | None | False | 88163.712 | 0 | | 2384966 | 70936 | None | 37.4 | Providing and fixing M.S.Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe and fixing pipe in between the existing two verticle poles (M.S rectangular poles) and spot welding the chain link with M.S block pipe including cost of all materials wastage in cutting, and scaffolding wherever necessary with all lead and lifts as directed by the Engineer-in-charge of eork etc.,complete including two coats of approved quality paint over one coat of shop paint.(Top Length 10+8+10+8=36& Bottom Length
10+8+10+8=36=72) (PW,P & IWTD, North Zone, Dharwad Circle 2016-17, Page No 262 , Item No.37.4)"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 360.64 | 360.64 | 72.0 | False | None | None | False | None | False | 25966.08 | 0 | | 2384967 | 70936 | None | 1, of Civil works - Part IV) | Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer- in-charge of works as per the standard procedure.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 1985.76 | 1985.76 | 8.0 | False | None | None | False | None | False | 15886.08 | 0 | | 2384968 | 70936 | None | 51.5.2, of Major Work Materials or Equipments | Supplying and installing of CO2 -4-5 Kgs capacity Fire Extinguishers
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 9733.92 | 9733.92 | 1.0 | False | None | None | False | None | False | 9733.92 | 0 | | 2384969 | 70936 | None | 15.111 of Part III Utilization (PWD Electrical) | Supplying of four bucket stand alongwith buckets. Complete
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2072.0 | 2072.0 | 1.0 | False | None | None | False | None | False | 2072.0 | 0 | | 2384970 | 70936 | None | 15.113 of Part III Utilization (PWD Electrical) | Supplying of Rubber HAND GLOVES
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Pair | 1092.0 | 1092.0 | 1.0 | False | None | None | False | None | False | 1092.0 | 0 | | 2384971 | 70936 | None | 15.116 of Part III Utilization (PWD Electrical) | Supplying of FIRST AID CHART with lamination. Complete
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 448.0 | 448.0 | 1.0 | False | None | None | False | None | False | 448.0 | 0 | | 2384972 | 70936 | None | 35.50, of Major Work Materials or Equipments | 11 KV Hickery rod set
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 6046.88 | 6046.88 | 1.0 | False | None | None | False | None | False | 6046.88 | 0 | | 2384973 | 70936 | None | 35.51, of Major Work Materials or Equipments | Grounding sticks extendable upto 18 ft : 3 nos. of each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Set | 1965.6 | 1965.6 | 1.0 | False | None | None | False | None | False | 1965.6 | 0 | | 2384974 | 70936 | None | 15.114 of Part III Utilization (PWD Electrical) | Supplying of first aid box. complete
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 672.0 | 672.0 | 1.0 | False | None | None | False | None | False | 672.0 | 0 | | 2384975 | 70936 | None | 19.3, of Major Work Materials or Equipments | Supplying and fixing of DANGER / CAUTION board
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 356.16 | 356.16 | 6.0 | False | None | None | False | None | False | 2136.96 | 0 | | 2384976 | 70936 | None | 15.117 of Part III Utilization (PWD Electrical) | Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2128.0 | 2128.0 | 2.0 | False | None | None | False | None | False | 4256.0 | 0 | | 2384977 | 70936 | None | 1.6.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Cum | 542.08 | 542.08 | 19.5 | False | None | None | False | None | False | 10570.56 | 0 | | 2384978 | 70936 | None | 2.16, of Labour Charges (11kV System) | Providing Spiral Earth Electrode type earthing (without
charcoal, salt etc.,)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 104.16 | 104.16 | 4.0 | False | None | None | False | None | False | 416.64 | 0 | | 2384979 | 70936 | None | 12.58.5 of Part III Utilization (PWD Electrical) | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 50 x 6
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 244.16 | 244.16 | 300.0 | False | None | None | False | None | False | 73248.0 | 0 | | 2384980 | 70936 | None | 40.02, of Standard Stock Material (11kV System) | DAS Specification Compact RMU (VCB/SF6 Type) as per IEC62271 The DAS RMUs shall have the following in addition to the Standards DC motors Numerical RelaysMultifunctional meters, fault passage indicator (FPI), Metering CTs Protection CTs Auxiliary transformers, Potential transformer, Batteries, Battery chargers (12 V & 24 V AC power socket and light for illumination of Control panel. Control cable from each panel shall be wired and terminated to suitable 24 pin connector in the control panel. Suitable space for fixing the Remote Terminal Unit (RTU) and Radio Modem in Control panel.Suitable Clamps for fixing antenna Pipe 4 Way RMU, 2OD 2VL (One Incomer Two Breakers + One Outgoing) 630 Amps with Copper Busbar
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1208690.56 | 1208690.56 | 1.0 | False | None | None | False | None | False | 1208690.56 | 0 | | 2384981 | 70936 | None | 18.01, of Standard Stock Material (11kV System) | LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 25408.32 | 25408.32 | 1.0 | False | None | None | False | None | False | 25408.32 | 0 | | 2384982 | 70936 | None | 30.02, of Standard Stock Material (11kV System) | LT Feeder Pillar - 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar asper IS-13947 Part-1&2(Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 70048.16 | 70048.16 | 1.0 | False | None | None | False | None | False | 70048.16 | 0 | | 2384983 | 70936 | None | 45.16, of Standard Stock Material (11kV System) | Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule - 3x95 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 8188.32 | 8188.32 | 1.0 | False | None | None | False | None | False | 8188.32 | 0 | | 2384984 | 70936 | None | 1.03, of Standard Stock Material (11kV System) | Supply of 8Mtr RCC Pole including earth work etc,. complete as per the standard technical specification BESCOM - b) 8Mtr 115Kg WL
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 5744.48 | 5744.48 | 25.0 | False | None | None | False | None | False | 143612.0 | 0 | | 2384985 | 70936 | None | 2.01, of Labour Charges (11kV System) - Part II | Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5
Mtr depth
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1032.64 | 1032.64 | 25.0 | False | None | None | False | None | False | 25816.0 | 0 | | 2384986 | 70936 | None | 2.06 of Standard Stock Material (11kV System) | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - LT 4 Pin Cross Arm - GI
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 424.48 | 424.48 | 25.0 | False | None | None | False | None | False | 10612.0 | 0 | | 2384987 | 70936 | None | 2.08 of Standard Stock Material (11kV System) | Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM. b)
2 Pin GI"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 193.76 | 193.76 | 25.0 | False | None | None | False | None | False | 4844.0 | 0 | | 2384988 | 70936 | None | 5.02, of Standard Stock Material (11kV System) | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification - RCC Pole Clamp - GI
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 122.08 | 122.08 | 50.0 | False | None | None | False | None | False | 6104.0 | 0 | | 2384989 | 70936 | None | 5.10,5.11,5.13,5.15, 5.16 & 8.02 of Standard Stock | Supplying and Fixing …. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 1823.86 | 1823.86 | 10.0 | False | None | None | False | None | False | 18238.6 | 0 | | 2384990 | 70936 | None | 6.05 of Standard Stock Material (11kV System) | Supplying and Fixing ….including all Hardwares etc complete as per the standard technical specification. 1.1 kV Polymeric Pin Insulator
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 97.44 | 97.44 | 100.0 | False | None | None | False | None | False | 9744.0 | 0 | | 2384991 | 70936 | None | 6.07 of Standard Stock Material (11kV System) | Supplying and Fixing ….including all Hardwares etc complete as per the standard technical specification BESCOM - No. 8 Strain Insulator
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 30.24 | 30.24 | 30.0 | False | None | None | False | None | False | 907.2 | 0 | | 2384992 | 70936 | None | 42.08 of Standard Stock Material (11kV System) | 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995
3x16 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral)"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 121.82 | 121.82 | 1650.0 | False | None | None | False | None | False | 201003.0 | 0 | | 2384993 | 70936 | None | 2.16, of Labour Charges (11kV System) | Providing Spiral Earth Electrode type earthing (without
charcoal, salt etc.,)
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 104.16 | 104.16 | 25.0 | False | None | None | False | None | False | 2604.0 | 0 | | 2384994 | 70936 | None | 1.1.2 of Part III Utilization (PWD Electrical) | Open Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick.
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 90.72 | 90.72 | 250.0 | False | None | None | False | None | False | 22680.0 | 0 | | 2384995 | 70936 | None | 2.3.4 of Part III Utilization (PWD Electrical) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring. with specified IS-694:1990 & conforming to GTP 4 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 70.56 | 70.56 | 750.0 | False | None | None | False | None | False | 52920.0 | 0 | | 2384996 | 70936 | None | 11.8.3 of Part III Utilization (PWD Electrical) | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater then IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency greater then1301m/w, nominal CRI greater then75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. - LED Streetlight 70W
"
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 6711.04 | 6711.04 | 25.0 | False | None | None | False | None | False | 167776.0 | 0 | | 2384997 | 70936 | None | 32.03, of Standard Stock Material (11kV System) | Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4core 10sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 132.16 | 132.16 | 750.0 | False | None | None | False | None | False | 99120.0 | 0 | | 2384998 | 70936 | None | 21.05, of Labour Charges (11kV System) | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required - In exixting trench/duct. 2.5 sqmm to 25 sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | m | 23.39 | 23.39 | 750.0 | False | None | None | False | None | False | 17542.5 | 0 | | 2384999 | 70936 | None | 35.01, of Standard Stock Material (11kV System) | Supplying and fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - Up to 4C x 50 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 362.88 | 362.88 | 25.0 | False | None | None | False | None | False | 9072.0 | 0 | | 2385000 | 70936 | None | 60.01, of Standard Stock Material (11kV System) | Supplying and fixing Aluminium End Terminal (Lug) suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 10 Sqmm
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 2.24 | 2.24 | 50.0 | False | None | None | False | None | False | 112.0 | 0 | | 2385001 | 70936 | None | 63.01, of Standard Stock Material (11kV System) | Supplying and fixing Brass Cable Gland suitable for 1.1 kV, LTUG Cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc - 25mm dia
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 88.48 | 88.48 | 50.0 | False | None | None | False | None | False | 4424.0 | 0 | | 2385002 | 70936 | None | 7.3.3 | Supplying, installation, testing and commissioning of solar hot water heater comprising of solar flat plate collector of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminum box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminum cladding. 300 LPD for Dormitory & Quarters
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | No | 78384.32 | 78384.32 | 8.0 | False | None | None | False | None | False | 627074.56 | 0 | | 2385003 | 70936 | None | 7.3.1 | Supplying, installation, testing and commissioning of solar hot water heater comprising of solar flat plate collector of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminum box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminum cladding. 100 LPD for K & D,
---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful completion of work etc., complete. The work shall be executed as per standard technical specifications and as per the directions of the Engineer in charge of the work | Each | 35591.36 | 35591.36 | 1.0 | False | None | None | False | None | False | 35591.36 | 0 |
|
|
|---|