| 1706872413000 | 0 | None | None | Buildings | Construction of Toilet building in sakleshpura government maadhari higher primary school in sakleshpura taluk in Hassan district | 438404.03 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2407456 | 71876 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. (CSR. Vol-1, P.5/I.1.4.1) | Cum | 271.04 | 271.04 | 12.77 | False | None | None | False | None | False | 3461.1808 | 0 | | 2407457 | 71876 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (CSR. Vol-1, P.15/I.2.1.3) | Cum | 6707.68 | 6707.68 | 2.42 | False | None | None | False | None | False | 16232.5856 | 0 | | 2407458 | 71876 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (CSR. Vol-2, P.9/I.5.4) | Cum | 7155.68 | 7155.68 | 5.44 | False | None | None | False | None | False | 38926.8992 | 0 | | 2407459 | 71876 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.. (CSR. Vol-1, P.7/I.1.9) | Cum | 297.92 | 297.92 | 7.86 | False | None | None | False | None | False | 2341.6512 | 0 | | 2407460 | 71876 | None | code05 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (CSR. Vol-2, P.17/I.2.4.2) | Cum | 10632.12 | 10632.12 | 0.5 | False | None | None | False | None | False | 5316.06 | 0 | | 2407461 | 71876 | None | code06 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (CSR. Vol-2, P.17/I.6.32) | Cum | 1378.72 | 1378.72 | 62.32 | False | None | None | False | None | False | 85921.8304 | 0 | | 2407462 | 71876 | None | code07 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(CSR. Vol-1, P.17/I.2.5.1) | Cum | 11891.57 | 11891.57 | 0.36 | False | None | None | False | None | False | 4280.9652 | 0 | | 2407463 | 71876 | None | code08 | Supplying fitting & placing TMT bar reinforcement to super structure complete as per Specifications(CSR. Vol-3, P.103/I.14.1) | Kg | 100191.84 | 100191.84 | 0.061 | False | None | None | False | None | False | 6111.70224 | 0 | | 2407464 | 71876 | None | code09 | PProviding 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CSR. Vol-2, P.41/I.8.2.1) | Sqm | 285.6 | 285.6 | 98.92 | False | None | None | False | None | False | 28251.552 | 0 | | 2407465 | 71876 | None | code10 | Providing 20 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CSR. Vol-2, P.41/I.8.3.1) | Sqm | 396.41 | 396.41 | 42.95 | False | None | None | False | None | False | 17025.8095 | 0 | | 2407466 | 71876 | None | code11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.(CSR. Vol-2, P.60/I.9.11) | Sqm | 995.68 | 995.68 | 13.13 | False | None | None | False | None | False | 13073.2784 | 0 | | 2407467 | 71876 | None | code12 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications (CSR. Vol-2, P.65/I.9.39) | Sqm | 1622.88 | 1622.88 | 4.42 | False | None | None | False | None | False | 7173.1296 | 0 | | 2407468 | 71876 | None | code13 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (CSR. Vol-2, P.75/I.11.5.1) | Sqm | 4751.04 | 4751.04 | 10.08 | False | None | None | False | None | False | 47890.4832 | 0 | | 2407469 | 71876 | None | code14 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (CSR. Vol-2, P.85/I.11.34A) | Kg | 188.16 | 188.16 | 56.7 | False | None | None | False | None | False | 10668.672 | 0 | | 2407470 | 71876 | None | code15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CSR. Vol-2, P.45/I.8.25) | Sqm | 153.44 | 153.44 | 98.92 | False | None | None | False | None | False | 15178.2848 | 0 | | 2407471 | 71876 | None | code16 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 194.88 | 194.88 | 42.95 | False | None | None | False | None | False | 8370.096 | 0 | | 2407472 | 71876 | None | code17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directionsof Engineer-in-charge. (CSR. Vol-2, P.48/I.8.41) | Sqm | 187.04 | 187.04 | 30.51 | False | None | None | False | None | False | 5706.5904 | 0 | | 2407473 | 71876 | None | code18 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges,handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. (CSR. Vol-V, CODE NO M 150 X | Mtr | 445.0 | 445.0 | 10.2 | False | None | None | False | None | False | 4539.0 | 0 | | 2407474 | 71876 | None | code19 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(CSR 2021-22, Item No: 11.16.2, Page No: 81, Vol. 2) | Kg | 152.32 | 152.32 | 288.93 | False | None | None | False | None | False | 44009.8176 | 0 | | 2407475 | 71876 | None | code20 | Providing & fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² (CSR 2021-22, Item No: 7.1.1, Page No: 21, Vol. 2) | Sqm | 636.16 | 636.16 | 36.47 | False | None | None | False | None | False | 23200.7552 | 0 | | 2407476 | 71876 | None | code21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:age No: 124 PWD SR 21-22 Vol 2, I NO 14.7 | Each | 2868.32 | 2868.32 | 2.0 | False | None | None | False | None | False | 5736.64 | 0 | | 2407477 | 71876 | None | code22 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:PWD SR 21-22 Vol 2, I NO 14.1 | Each | 5470.08 | 5470.08 | 5.0 | False | None | None | False | None | False | 27350.4 | 0 | | 2407478 | 71876 | None | code23 | Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank | Ltr | 500.0 | 500.0 | 10.08 | False | None | None | False | None | False | 5040.0 | 0 | | 2407479 | 71876 | None | code24 | Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances., complete200 mmx1250 mm(PWD SR 2021-22 P.203 I.NO T820B (Vol.2) | No | 10473.12 | 10473.12 | 1.0 | False | None | None | False | None | False | 10473.12 | 0 | | 2407480 | 71876 | None | code25 | Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with all lead and lifts.(PWD SR 2021-22 P.203 I.NO T810B (Vol.2) | No | 941.92 | 941.92 | 1.0 | False | None | None | False | None | False | 941.92 | 0 | | 2407481 | 71876 | None | code26 | Providing and fixing PTMT bib cock of approved quality and colour15 mm nominal bore, 122mm long, weighing not less than 99 g13(PWD SR 2021-22 P.117.I NO 13.17.2 | No | 236.32 | 236.32 | 5.0 | False | None | None | False | None | False | 1181.6 | 0 |
|