| 2402344 | 71635 | None | 001 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work Note: Cost of De-watering upto 5 % may be added, where required assessment for dewatering shall be made as per site condition. In all kinds of soils Depth upto 1.5 m | Cum | 242.0 | 242.0 | 6.811 | False | None | None | False | None | False | 1648.262 | 0 |
| 2402345 | 71635 | None | 002 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5664.0 | 5664.0 | 2.3514 | False | None | None | False | None | False | 13318.3296 | 0 |
| 2402346 | 71635 | None | 003 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6205.0 | 6205.0 | 4.9665 | False | None | None | False | None | False | 30817.1325 | 0 |
| 2402347 | 71635 | None | 004 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications | Cum | 160.0 | 160.0 | 4.0 | False | None | None | False | None | False | 640.0 | 0 |
| 2402348 | 71635 | None | 005 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6217.0 | 6217.0 | 1.5 | False | None | None | False | None | False | 9325.5 | 0 |
| 2402349 | 71635 | None | 006 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. | Sqm | 255.0 | 255.0 | 3.6 | False | None | None | False | None | False | 918.0 | 0 |
| 2402350 | 71635 | None | 007 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m² | Sqm | 897.0 | 897.0 | 46.0 | False | None | None | False | None | False | 41262.0 | 0 |
| 2402351 | 71635 | None | 008 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | Sqm | 1145.0 | 1145.0 | 20.0 | False | None | None | False | None | False | 22900.0 | 0 |
| 2402352 | 71635 | None | 009 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8661.0 | 8661.0 | 0.345 | False | None | None | False | None | False | 2988.045 | 0 |
| 2402353 | 71635 | None | 010 | Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components For 1000 LPH SS : Skid Type | No | 441000.0 | 441000.0 | 1.0 | False | None | None | False | None | False | 441000.0 | 0 |
| 2402354 | 71635 | None | 011 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. | Kg | 452.0 | 452.0 | 80.0 | False | None | None | False | None | False | 36160.0 | 0 |
| 2402355 | 71635 | None | 012 | Open Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. | Mtr | 70.0 | 70.0 | 15.0 | False | None | None | False | None | False | 1050.0 | 0 |
| 2402356 | 71635 | None | 013 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, necessary masonry patch work complete. d)8"x6"x3" (203x152x76mm) | No | 73.0 | 73.0 | 6.0 | False | None | None | False | None | False | 438.0 | 0 |
| 2402357 | 71635 | None | 014 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. I. Point wiring using class A Materialsa) Short point up to 3Mtr from tapping point to out let via switch | Point | 174.0 | 174.0 | 1.0 | False | None | None | False | None | False | 174.0 | 0 |
| 2402358 | 71635 | None | 015 | I. Point wiring using class A Materials b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch | Point | 245.0 | 245.0 | 2.0 | False | None | None | False | None | False | 490.0 | 0 |
| 2402359 | 71635 | None | 016 | I. Point wiring using class A Materials c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch | Point | 363.0 | 363.0 | 3.0 | False | None | None | False | None | False | 1089.0 | 0 |
| 2402360 | 71635 | None | 017 | Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. b) 6Amps 3/5 Way | No | 150.0 | 150.0 | 2.0 | False | None | None | False | None | False | 300.0 | 0 |
| 2402361 | 71635 | None | 018 | Supplying and fixing of Bakelite D.P/Socket/Switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS. 16 Amps flush type SP switch | No | 99.0 | 99.0 | 2.0 | False | None | None | False | None | False | 198.0 | 0 |
| 2402362 | 71635 | None | 019 | Supplying and fixing of Bakelite D.P/Socket/Switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS. 16/6 Amps flush type Universal Socket | No | 99.0 | 99.0 | 2.0 | False | None | None | False | None | False | 198.0 | 0 |
| 2402363 | 71635 | None | 020 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring. I.1.5 sqmm (Copper wire) | Mtr | 18.6 | 18.6 | 30.0 | False | None | None | False | None | False | 558.0 | 0 |
| 2402364 | 71635 | None | 021 | I.2.5 sqmm (Copper wire) | Mtr | 29.2 | 29.2 | 20.0 | False | None | None | False | None | False | 584.0 | 0 |
| 2402365 | 71635 | None | 022 | I.6 sqmm (Copper wire) | Mtr | 63.8 | 63.8 | 30.0 | False | None | None | False | None | False | 1914.0 | 0 |
| 2402366 | 71635 | None | 023 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. | Sq CM | 0.25 | 0.25 | 1500.0 | False | None | None | False | None | False | 375.0 | 0 |
| 2402367 | 71635 | None | 024 | Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. Group 'A' | No | 88.0 | 88.0 | 4.0 | False | None | None | False | None | False | 352.0 | 0 |
| 2402368 | 71635 | None | 025 | Supply patty type fluorescent tube light fitting of 4'- 36/40 watts fluorescent tube fitting, made out of M.S sheet and stove enameled with low loss open construction copper wound ferromagnetic ballast, starter, locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 Volts A C Supply including 1No 4'-36/40Watts fluorescent tube. a.Group 'A' | No | 669.0 | 669.0 | 3.0 | False | None | None | False | None | False | 2007.0 | 0 |
| 2402369 | 71635 | None | 026 | Supplying decorative horizontal type street light flourcent fitting weather and water proof complete with energy saving electronic ballast etc., locking type bross contact holers with one number of 4ft 40wt flourcent tube completely wired for use on 230/250 volts 50 cycles AC supply with opal reeded perspex cover at bottom complete fitting 1x4' - 36/40wts | No | 1866.0 | 1866.0 | 2.0 | False | None | None | False | None | False | 3732.0 | 0 |
| 2402370 | 71635 | None | 027 | Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps (if required) a) On wall/ceiling/Rafter/Girders | No | 98.0 | 98.0 | 3.0 | False | None | None | False | None | False | 294.0 | 0 |
| 2402371 | 71635 | None | 028 | Supply & fixing using 25mm dia class A GI pipe bracket up to 2.7mtrs long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing FTL street light fitting of all capacities on rail/RCC/wall/tubular pole using suitable clamps bolts, nuts & wiring using suitable capacity of wires etc complete. | No | 795.0 | 795.0 | 2.0 | False | None | None | False | None | False | 1590.0 | 0 |
| 2402372 | 71635 | None | 029 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc. a) 20"x20"x2.5" | No | 302.0 | 302.0 | 2.0 | False | None | None | False | None | False | 604.0 | 0 |
| 2402373 | 71635 | None | 030 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 32Amps | No | 180.0 | 180.0 | 2.0 | False | None | None | False | None | False | 360.0 | 0 |
| 2402374 | 71635 | None | 031 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. e) 5-32Amps Group 'A' 40 to 63 amps D.P.MCB | No | 1936.0 | 1936.0 | 1.0 | False | None | None | False | None | False | 1936.0 | 0 |
| 2402375 | 71635 | None | 032 | 5 to 32 amps S.P.MCB | No | 418.0 | 418.0 | 2.0 | False | None | None | False | None | False | 836.0 | 0 |
| 2402376 | 71635 | None | 033 | Supplying, fixing and wiring electronic 5 to 20Amps SIngle phase Class-1 Accuracy Energy Meter. Group A | No | 1188.0 | 1188.0 | 1.0 | False | None | None | False | None | False | 1188.0 | 0 |
| 2402377 | 71635 | None | 034 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia. | No | 2727.0 | 2727.0 | 2.0 | False | None | None | False | None | False | 5454.0 | 0 |
| 2402378 | 71635 | None | 035 | Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. GI strip 25x3mm | Mtr | 77.0 | 77.0 | 15.0 | False | None | None | False | None | False | 1155.0 | 0 |
| 2402379 | 71635 | None | 036 | Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class. Class A’ PVC Cable 4 core 16 sqmm | Mtr | 140.4 | 140.4 | 10.0 | False | None | None | False | None | False | 1404.0 | 0 |
| 2402380 | 71635 | None | 037 | Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In exixting trench/duct. 6 sqmm to 16 sqmm | Mtr | 10.8 | 10.8 | 10.0 | False | None | None | False | None | False | 108.0 | 0 |
| 2402381 | 71635 | None | 038 | Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (hard) | Mtr | 106.0 | 106.0 | 10.0 | False | None | None | False | None | False | 1060.0 | 0 |
| 2402382 | 71635 | None | 039 | Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 40mm | Mtr | 345.0 | 345.0 | 5.0 | False | None | None | False | None | False | 1725.0 | 0 |
| 2402383 | 71635 | None | 040 | Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. 16 Sqmm | Mtr | 280.0 | 280.0 | 1.0 | False | None | None | False | None | False | 280.0 | 0 |