| 2440864 | 73471 | None | code01 | Providing Brick work with common burnt clay machine mouldedperforated bricks of class designation 5.0 conforming to IS: 2222 insuperstructure above plinth level in cement mortar1:6(1 cement : 6coarse sand) With Non modular bricksincludingcostofallmaterials,labour,scaffolding and usage charges of machinery&otherincidentalchargescomplete as per the direction of engineer incharge of work.. | Cum | 7978.0 | 7978.0 | 47.57 | False | None | None | False | None | False | 379513.46 | 0 |
| 2440865 | 73471 | None | code02 | Providing Half brick masonry with common burnt clay Non Modularbricks of class designation 3.5 in superstructure above plinth level upto floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) includingcost of all materials, labour, scaffolding and usage charges of machinery& other incidental charges complete as per the direction of engineerincharge of work. | Sqm | 976.0 | 976.0 | 5.3 | False | None | None | False | None | False | 5172.8 | 0 |
| 2440866 | 73471 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)apart in each course including cost of materials, labour, curing complete as per specifications. & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 6389.0 | 6389.0 | 1.27 | False | None | None | False | None | False | 8114.03 | 0 |
| 2440867 | 73471 | None | code04 | Providing and laying 100mm thick pre-cast cover slabs over drains of width not exceeding 800 mm using M20 concrete reinforced with steel @ 6.00 kg/Sqm, slabs JOinted in CM 1:3 proportion and nicely finished including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, HOM, curing, lead and lift charges etc,& with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 928.0 | 928.0 | 0.64 | False | None | None | False | None | False | 593.92 | 0 |
| 2440868 | 73471 | None | code05 | Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to steel windows by welding& with all lead and lift. and as per direction of the Engineer in charge of work. | Kg | 168.0 | 168.0 | 126.0 | False | None | None | False | None | False | 21168.0 | 0 |
| 2440869 | 73471 | None | code06 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 4242.0 | 4242.0 | 21.24 | False | None | None | False | None | False | 90100.08 | 0 |
| 2440870 | 73471 | None | code07 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge | Sqm | 279.0 | 279.0 | 217.07 | False | None | None | False | None | False | 60562.53 | 0 |
| 2440871 | 73471 | None | code08 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to
brick/stone masonry including rounding off corners wherever required
smooth rendering, providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications and as per directions
of Engineer-in-charge. | Sqm | 333.0 | 333.0 | 265.56 | False | None | None | False | None | False | 88431.48 | 0 |
| 2440872 | 73471 | None | code09 | Providing and laying Vitrified tiles with thickness 9-10 mm in different
sizes with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, over 12 mm thick bed of cement
mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry
@ 3.3 kg/ m2 including grouting the joint with white cement & matching
pigments etc. complete. size of 600x600mm& with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 1175.0 | 1175.0 | 44.56 | False | None | None | False | None | False | 52358.0 | 0 |
| 2440873 | 73471 | None | code10 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 889.0 | 889.0 | 65.34 | False | None | None | False | None | False | 58087.26 | 0 |
| 2440874 | 73471 | None | code11 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 127.0 | 127.0 | 217.07 | False | None | None | False | None | False | 27567.89 | 0 |
| 2440875 | 73471 | None | code12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.& with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 100.0 | 100.0 | 217.07 | False | None | None | False | None | False | 21707.0 | 0 |
| 2440876 | 73471 | None | code13 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 174.0 | 174.0 | 265.56 | False | None | None | False | None | False | 46207.44 | 0 |
| 2440877 | 73471 | None | code14 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge | Sqm | 115.0 | 115.0 | 49.95 | False | None | None | False | None | False | 5744.25 | 0 |
| 2440878 | 73471 | None | code15 | Providing and laying Polished Sadarahalli Grey Granite stone flooring in
required design and patterns, in linear as well as curvilinear portions of
the building all complete as per the architectural drawings with 20 mm
thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1
cement : 4 coarse sand) laid and jointed with cement slurry and pointing
with white cement slurry admixed with pigment of matching shade
including rubbing , curing and polishing etc. all complete as specified and
as directed by the Engineer-in-Charge | Sqm | 2085.0 | 2085.0 | 5.49 | False | None | None | False | None | False | 11446.65 | 0 |
| 2440879 | 73471 | None | code16 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 862.0 | 862.0 | 12.96 | False | None | None | False | None | False | 11171.52 | 0 |
| 2440880 | 73471 | None | code17 | Providing and fixing 12 m thick flat pressed 3 layer medium density particle
board or graded particle board (Grade I) IS: 3087 marked, in ceiling with
necessary nails etc. complete& with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 748.0 | 748.0 | 2.4 | False | None | None | False | None | False | 1795.2 | 0 |
| 2440881 | 73471 | None | code18 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).& with all lead and lift. and as per direction of the Engineer in charge of work.20 mm dia pipe | Mtr | 242.0 | 242.0 | 40.0 | False | None | None | False | None | False | 9680.0 | 0 |
| 2440882 | 73471 | None | code19 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain
with rubber plug, 40 mm C.P. brass waste complete, including painting
the fittings and brackets, cutting and making good the walls wherever
required:& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 2981.0 | 2981.0 | 2.0 | False | None | None | False | None | False | 5962.0 | 0 |
| 2440883 | 73471 | None | code20 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good
the walls and floors wherever required& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 4838.0 | 4838.0 | 1.0 | False | None | None | False | None | False | 4838.0 | 0 |
| 2440884 | 73471 | None | code21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 2561.0 | 2561.0 | 1.0 | False | None | None | False | None | False | 2561.0 | 0 |
| 2440885 | 73471 | None | code22 | Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity)& with all lead and lift. and as per direction of the Engineer in charge of work. | l | 9.0 | 9.0 | 500.0 | False | None | None | False | None | False | 4500.0 | 0 |
| 2440886 | 73471 | None | code23 | Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931
No.& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 635.0 | 635.0 | 4.0 | False | None | None | False | None | False | 2540.0 | 0 |
| 2440887 | 73471 | None | code24 | Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :25 mm nominal bore& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 332.0 | 332.0 | 1.0 | False | None | None | False | None | False | 332.0 | 0 |
| 2440888 | 73471 | None | code25 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all
fitting arrangements & all necessary accessories complete& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 220.0 | 220.0 | 2.0 | False | None | None | False | None | False | 440.0 | 0 |
| 2440889 | 73471 | None | code26 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing
not less than 85 g | No | 166.0 | 166.0 | 2.0 | False | None | None | False | None | False | 332.0 | 0 |