createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1706942002302 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1910.00 emd 153000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 13-02-2024 16:00:00 tenderQueryClose 12-02-2024 16:00:02 technicalBidOpen 14-02-2024 16:30:00 publishedDate 06-02-2024 10:42:08 publishedByPost PWD_EE_DIV_HSPT publishedByUser KPE10175 - RAVINDRA R KATTI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Executive Engineer splitEmdRequiredYn True emdBankGuarantee 103000.00 emdCash 50000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 080394200231 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1706942002331 version 12 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT6907 title Construction of Anganwadi Building (A) at B.T.Guddi(18.00 lakhs), Suladahalli (A) (18.00 lakhs), Hulikere (B) (18.00 lakhs), Emblivaddarahatti(18.00 lakhs) and Piccharahatti(18.00 lakhs) Village, Kudligi Taluk Vijayanagara District.(This work is reserved for SC Catogery) description Construction of Anganwadi Building (A) at B.T.Guddi(18.00 lakhs), Suladahalli (A) (18.00 lakhs), Hulikere (B) (18.00 lakhs), Emblivaddarahatti(18.00 lakhs) and Piccharahatti(18.00 lakhs) Village, Kudligi Taluk Vijayanagara District.(This work is reserve for SC Catogery) category WORKS categoryText Works ecv 7616270.58 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1694 locationName PWD Division Office Hosapete provisionalAmount 9000000.0 groupOverheadTotal 0.0 fileNumber AEE/PWD/KDL/KKRDB/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1706942002000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building (A) at B.T.Guddi Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2414189 72301 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2414190 72301 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2414191 72301 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2414192 72301 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2414193 72301 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2414194 72301 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2414195 72301 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2414196 72301 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2414197 72301 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2414198 72301 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2414199 72301 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2414200 72301 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2414201 72301 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2414202 72301 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2414203 72301 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2414204 72301 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2414205 72301 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2414206 72301 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2414207 72301 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2414208 72301 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2414209 72301 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2414210 72301 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2414211 72301 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2414212 72301 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2414213 72301 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2414214 72301 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2414215 72301 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2414216 72301 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2414217 72301 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2414218 72301 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2414219 72301 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2414220 72301 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2414221 72301 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2414222 72301 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2414223 72301 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2414224 72301 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2414225 72301 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2414226 72301 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2414227 72301 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2414228 72301 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2414229 72301 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2414230 72301 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2414231 72301 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2414232 72301 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2414233 72301 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2414234 72301 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2414235 72301 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2414236 72301 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2414237 72301 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2414238 72301 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2414239 72301 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2414240 72301 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2414241 72301 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1706942002000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building (A) at Suladahalli Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2414242 72302 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2414243 72302 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2414244 72302 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2414245 72302 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2414246 72302 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2414247 72302 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2414248 72302 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2414249 72302 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2414250 72302 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2414251 72302 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2414252 72302 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2414253 72302 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2414254 72302 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2414255 72302 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2414256 72302 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2414257 72302 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2414258 72302 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2414259 72302 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2414260 72302 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2414261 72302 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2414262 72302 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2414263 72302 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2414264 72302 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2414265 72302 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2414266 72302 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2414267 72302 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2414268 72302 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2414269 72302 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2414270 72302 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2414271 72302 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2414272 72302 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2414273 72302 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2414274 72302 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2414275 72302 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2414276 72302 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2414277 72302 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2414278 72302 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2414279 72302 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2414280 72302 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2414281 72302 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2414282 72302 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2414283 72302 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2414284 72302 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2414285 72302 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2414286 72302 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2414287 72302 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2414288 72302 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2414289 72302 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2414290 72302 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2414291 72302 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2414292 72302 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2414293 72302 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2414294 72302 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1706942002000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building (B) at Hulikere Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2414295 72303 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2414296 72303 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2414297 72303 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2414298 72303 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2414299 72303 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2414300 72303 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2414301 72303 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2414302 72303 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2414303 72303 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2414304 72303 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2414305 72303 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2414306 72303 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2414307 72303 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2414308 72303 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2414309 72303 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2414310 72303 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2414311 72303 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2414312 72303 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2414313 72303 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2414314 72303 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2414315 72303 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2414316 72303 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2414317 72303 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2414318 72303 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2414319 72303 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2414320 72303 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2414321 72303 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2414322 72303 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2414323 72303 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2414324 72303 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2414325 72303 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2414326 72303 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2414327 72303 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2414328 72303 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2414329 72303 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2414330 72303 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2414331 72303 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2414332 72303 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2414333 72303 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2414334 72303 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2414335 72303 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2414336 72303 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2414337 72303 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2414338 72303 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2414339 72303 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2414340 72303 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2414341 72303 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2414342 72303 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2414343 72303 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2414344 72303 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2414345 72303 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2414346 72303 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2414347 72303 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1706942002000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building at Emblivaddarahatti Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2414348 72304 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2414349 72304 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2414350 72304 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2414351 72304 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2414352 72304 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2414353 72304 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2414354 72304 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2414355 72304 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2414356 72304 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2414357 72304 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2414358 72304 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2414359 72304 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2414360 72304 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2414361 72304 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2414362 72304 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2414363 72304 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2414364 72304 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2414365 72304 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2414366 72304 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2414367 72304 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2414368 72304 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2414369 72304 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2414370 72304 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2414371 72304 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2414372 72304 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2414373 72304 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2414374 72304 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2414375 72304 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2414376 72304 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2414377 72304 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2414378 72304 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2414379 72304 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2414380 72304 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2414381 72304 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2414382 72304 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2414383 72304 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2414384 72304 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2414385 72304 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2414386 72304 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2414387 72304 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2414388 72304 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2414389 72304 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2414390 72304 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2414391 72304 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2414392 72304 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2414393 72304 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2414394 72304 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2414395 72304 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2414396 72304 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2414397 72304 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2414398 72304 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2414399 72304 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2414400 72304 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1706942002000 0 None None Buildings Detailed Estimate for the Construction of Anganwadi Building at Piccharahatti Village, Kudligi Taluk Vijayanagara District. 1523254.1 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2414401 72305 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2414402 72305 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2414403 72305 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2414404 72305 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2414405 72305 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2414406 72305 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2414407 72305 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2414408 72305 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2414409 72305 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2414410 72305 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2414411 72305 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2414412 72305 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2414413 72305 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2414414 72305 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2414415 72305 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2414416 72305 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2414417 72305 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2414418 72305 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2414419 72305 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2414420 72305 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2414421 72305 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2414422 72305 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2414423 72305 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2414424 72305 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2414425 72305 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2414426 72305 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2414427 72305 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2414428 72305 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2414429 72305 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2414430 72305 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2414431 72305 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2414432 72305 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2414433 72305 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2414434 72305 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2414435 72305 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2414436 72305 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2414437 72305 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2414438 72305 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2414439 72305 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2414440 72305 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2414441 72305 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2414442 72305 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2414443 72305 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2414444 72305 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2414445 72305 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2414446 72305 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2414447 72305 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2414448 72305 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2414449 72305 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2414450 72305 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2414451 72305 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2414452 72305 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2414453 72305 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1706942006000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1706942006000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1706942006000 2 None None ELIGIBILITY In accordance with the notification of Government of Karnataka No. PDS81PMS/2023, Bengaluru dated 10.10.2023 this work is reserved for Scheduled Caste contractors, and only Scheduled caste contractors shall have to participate in the tender. The Scheduled caste contractors participating in the tender should compulsorily furnish the Caste certificate issued by a competent authority, failing which the tender is liable for rejection None 1706943109000 0 None None ELIGIBILITY The schedule Caste contractor participating in the tender shall be domicile of State of Karnataka for more than 10 (ten) years None 1706943119000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1706943125000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1706943130000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1706943136000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1706943142000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1706943147000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1706943151000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification. None 1706943156000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive). None 1706943160000 0 None None ELIGIBILITY The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification. None 1706943165000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder None 1706943172000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason. None 1706943178000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing KPP-Portal None 1706943182000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1706943186000 0 None None ELIGIBILITY The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts None 1706943190000 0 None None ELIGIBILITY As per circular of Govt. of Karnataka Government Order No. PWD 107 CRM 2013, Bangalore, Dated: 20.02.2014, If the tenderer uploads the Bank Guarantee, but does not produce original at the time of technical scrutiny, such tenders will not be disqualified either in the technical bid stage or financial bid stage. But the qualified tenderer (L1) must submit the original copy of the BG at the time of agreement. None 1706943195000 0 None None ELIGIBILITY The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules and any modifications before and after execution of agreement None 1706943200000 0 None None ELIGIBILITY After the award of the contract, the contractor has to furnish the details in respect of labour employed and the EPF details for this work in every RA bill. None 1706943205000 0 None None ELIGIBILITY Bidders are advised to note that, 18% GST will be added to the contract amount. None 1706943211000 0 None None ELIGIBILITY The Increse in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1706943217000 0 None None ELIGIBILITY The bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected. None 1706943222000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1706943227000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2023-24 in the Technical Qualification Criteria mentioned in the next section. None 1706943240000 0 None None ELIGIBILITY The work should be completed in 09(Nine) Months ( including monsoon) None 1706943244000 0 None None ELIGIBILITY The earnest money deposit shall be in two parts i.e.,Part (1) Rs.50,000 by e.payment and balance Part (2) Rs. Balance amount as specified in the KPP portal shall be in the form of Bank Guarantee in the prescribed format obtained from the Nationalized / Schedule Bank FDR or specified small savings instrument pledged to the Executive Engineer, Public Works Department Division, HOSAPETE payable at HOSAPETE before the prescribed date and time of opening of Technical Bid without fail None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Information on works which are yet to be completed Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information on works which are yet to be completed None None None None Information of the works for which Tender acceptance letters are received. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information of the works for which Tender acceptance letters are received. None None None None Information of the works for which Tenderer has submitted Tender Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information of the works for which Tenderer has submitted Tender None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 b) Executed in any one year, the following minimum quantities of work:1 Earth work /Embankment/Sub Grade/Shoulder 568.00Cum 2. CC/RCC/DLC/CC Pavement 154.00Cum 3 SSM/BBM/RSM 226.00 Cum 4 Steel 9554.00 Kgs 5 Plastering 1200.00 Sqm 6 flooring 192.00 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 b) Satisfactorily completed, as prime contractor, at least one similar work such as Building Work of value not less than Rs. 38.08 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Principal Place of Business Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Principal Place of Business None None None None Latest Income Tax Clearance Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.76.16 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid Assets and /or availability of credit facilities of no less than Rs.22.85 lakhs (Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Registration Certificate True Technical Bid Annual Turnover Certificate Not below the rank of Charterd Accountant,The bidder should mention the UDIN No True Technical Bid Single Work Done Certificate Not Below the rank of Executive Engineer True Technical Bid Quantity Wise Work Done Certificate True Technical Bid Liquid Assets True Technical Bid GST CERTIFICATE True Technical Bid Principal Place of Business. True Technical Bid Tender Bid Capacity True Technical Bid List of Existing commitments & Ongoing works- Format-5 True Technical Bid List of works for which tenders acceptence letter received-Format-6 True Technical Bid List of works for which tenders already submitted-Format-7 True Technical Bid Profit and loss ac & Balance sheets for 5 years True Technical Bid Income Tax returns for 5 years True Technical Bid Reserved Category Certificate True Technical Bid Domacial Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None