| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1707198063000 | 0 | None | None | Buildings | Civil Work GF | 14750698.31 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2450891 | 74001 | None | Vol.2-19.3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate
disposal area as per direction of Engineer-in-charge. | Cum | 2547.3 | 2547.3 | 118.05 | False | None | None | False | None | False | 300708.765 | 0 | | 2450892 | 74001 | None | Vol.2-19.10.1 | Dismantling dressed stone work ashlar face stone work, marble work or
precast concrete work manually/ by mechanical means including stacking
of serviceable and disposal of unserviceable material to the appropriate
disposal area as per direction of Engineer-in-charge. | Cum | 1051.05 | 1051.05 | 733.21 | False | None | None | False | None | False | 770640.3705 | 0 | | 2450893 | 74001 | None | Vol.1-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 107.1 | 107.1 | 392.82 | False | None | None | False | None | False | 42071.022 | 0 | | 2450894 | 74001 | None | Vol.1-2.1.2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 52.89 | False | None | None | False | None | False | 314547.408 | 0 | | 2450895 | 74001 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 49.25 | False | None | None | False | None | False | 342853.875 | 0 | | 2450896 | 74001 | None | form work | Centering for Footing | Cum | 208.85 | 208.85 | 49.25 | False | None | None | False | None | False | 10285.8625 | 0 | | 2450897 | 74001 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 32.92 | False | None | None | False | None | False | 229172.58 | 0 | | 2450898 | 74001 | None | form work | Centering for Columns | Cum | 4873.05 | 4873.05 | 32.92 | False | None | None | False | None | False | 160420.806 | 0 | | 2450899 | 74001 | None | Vol.1-2.5.1.3 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 39.15 | False | None | None | False | None | False | 272542.725 | 0 | | 2450900 | 74001 | None | form work | Centering for Plinth Beam | Cum | 3480.75 | 3480.75 | 39.15 | False | None | None | False | None | False | 136271.3625 | 0 | | 2450901 | 74001 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 66.4 | False | None | None | False | None | False | 462243.6 | 0 | | 2450902 | 74001 | None | form work | Centering for Lintel, roof beams & Staircase | Cum | 4176.9 | 4176.9 | 66.4 | False | None | None | False | None | False | 277346.16 | 0 | | 2450903 | 74001 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 1.82 | False | None | None | False | None | False | 12669.93 | 0 | | 2450904 | 74001 | None | form work | Centering for chajja | Cum | 3132.67 | 3132.67 | 1.82 | False | None | None | False | None | False | 5701.4594 | 0 | | 2450905 | 74001 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 87.76 | False | None | None | False | None | False | 610941.24 | 0 | | 2450906 | 74001 | None | form work | Centering for Slab | Cum | 3480.75 | 3480.75 | 87.76 | False | None | None | False | None | False | 305470.62 | 0 | | 2450907 | 74001 | None | Vol.2-5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5891.6 | 5891.6 | 129.03 | False | None | None | False | None | False | 760193.148 | 0 | | 2450908 | 74001 | None | Vol.2-5.4 | Providing and constructing laterite Size Stone masonry including cost and conveyance of all materials curing etc., complete as per specification for Basement in CM 1:6 | Cum | 6708.5 | 6708.5 | 99.49 | False | None | None | False | None | False | 667428.665 | 0 | | 2450909 | 74001 | None | Vol.1-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including costofallmaterials,machinery,labour,cleaning,htening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings | MT | 93929.9 | 93929.9 | 29.12 | False | None | None | False | None | False | 2735238.688 | 0 | | 2450910 | 74001 | None | Vol.1-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 210.92 | False | None | None | False | None | False | 58909.956 | 0 | | 2450911 | 74001 | None | Vol.1-1.8 | Construction of Embankment by excavating the
available approved Gravel/Murrum deposited at a
place or borrow pits during or prior excavation with
all lifts and lead, transportation to site, spreading,
grading to required slope and compacting to meet the
requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & allother appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 432.14 | False | None | None | False | None | False | 215076.078 | 0 | | 2450912 | 74001 | None | Vol.2-6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Sqm | 8367.5 | 8367.5 | 198.36 | False | None | None | False | None | False | 1659777.3 | 0 | | 2450913 | 74001 | None | Vol.2-11.34.B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kgs | 192.2 | 192.2 | 1283.04 | False | None | None | False | None | False | 246600.288 | 0 | | 2450914 | 74001 | None | Vol.2-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 52.5 | 52.5 | 131.22 | False | None | None | False | None | False | 6889.05 | 0 | | 2450915 | 74001 | None | Vol.2-8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 120.8 | 120.8 | 131.22 | False | None | None | False | None | False | 15851.376 | 0 | | 2450916 | 74001 | None | Vol.2-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1066.8 | 1066.8 | 15.0 | False | None | None | False | None | False | 16002.0 | 0 | | 2450917 | 74001 | None | Vol.2-11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steelmembers shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 593.3 | 593.3 | 91.8 | False | None | None | False | None | False | 54464.94 | 0 | | 2450918 | 74001 | None | Vol.2-12.52 | Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 811.7 | 811.7 | 39.0 | False | None | None | False | None | False | 31656.3 | 0 | | 2450919 | 74001 | None | Vol.2-8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) on concrete surface / ceilings including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charges | Sqm | 221.6 | 221.6 | 679.64 | False | None | None | False | None | False | 150608.224 | 0 | | 2450920 | 74001 | None | Vol.2-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 309.75 | 309.75 | 626.15 | False | None | None | False | None | False | 193949.9625 | 0 | | 2450921 | 74001 | None | Vol.2-12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long brackets
of 15x15mm M.S Square tube, the entire door frame to be reinforced with
19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the
wall using M.S. Screws of 65/80mm size complete as per manufacturers
specification & direction of Engineer-in-charge | m | 333.9 | 333.9 | 57.0 | False | None | None | False | None | False | 19032.3 | 0 | | 2450922 | 74001 | None | Vol.2-12.55 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelam | Sqm | 2142.0 | 2142.0 | 15.75 | False | None | None | False | None | False | 33736.5 | 0 | | 2450923 | 74001 | None | Vol.1-2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 64.58 | False | None | None | False | None | False | 421568.553 | 0 | | 2450924 | 74001 | None | Vol.2-9.22.1 | Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm | Sqm | 1313.55 | 1313.55 | 698.31 | False | None | None | False | None | False | 917265.1005 | 0 | | 2450925 | 74001 | None | Vol.2-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 933.45 | 933.45 | 20.25 | False | None | None | False | None | False | 18902.3625 | 0 | | 2450926 | 74001 | None | Vol.2-9.38 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. | Sqm | 1461.6 | 1461.6 | 122.4 | False | None | None | False | None | False | 178899.84 | 0 | | 2450927 | 74001 | None | Vol.2-12.21 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6029.1 | 6029.1 | 39.48 | False | None | None | False | None | False | 238028.868 | 0 | | 2450928 | 74001 | None | Vol.2-12.32 | Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6134.1 | 6134.1 | 56.16 | False | None | None | False | None | False | 344491.056 | 0 | | 2450929 | 74001 | None | Vol.2-12.58 | Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete | No | 126.0 | 126.0 | 15.0 | False | None | None | False | None | False | 1890.0 | 0 | | 2450930 | 74001 | None | Vol.2-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete | Nos | 248.85 | 248.85 | 147.0 | False | None | None | False | None | False | 36580.95 | 0 | | 2450931 | 74001 | None | Vol.2-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete | Nos | 136.5 | 136.5 | 264.0 | False | None | None | False | None | False | 36036.0 | 0 | | 2450932 | 74001 | None | Vol.2-12.71.1 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plat ing and fixing with necessary screws etc., complet Nickel plated mild steel piano hinges 1 mm thick 35 mm wide | Nos | 312.9 | 312.9 | 279.0 | False | None | None | False | None | False | 87299.1 | 0 | | 2450933 | 74001 | None | Vol.2-8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 143.85 | 143.85 | 2135.42 | False | None | None | False | None | False | 307180.167 | 0 | | 2450934 | 74001 | None | Vol.2-8.28 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 93.45 | 93.45 | 626.15 | False | None | None | False | None | False | 58513.7175 | 0 | | 2450935 | 74001 | None | Vol.2-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 55.65 | 55.65 | 215.19 | False | None | None | False | None | False | 11975.3235 | 0 | | 2450936 | 74001 | None | Vol.2-8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 144.9 | 144.9 | 215.19 | False | None | None | False | None | False | 31181.031 | 0 | | 2450937 | 74001 | None | Vol.2-12.12 | Providing Mathi/nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 130412.1 | 130412.1 | 4.07 | False | None | None | False | None | False | 530777.247 | 0 | | 2450938 | 74001 | None | Vol.2-8.1.2 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 253.05 | 253.05 | 1623.42 | False | None | None | False | None | False | 410806.431 | 0 |
| | 1707198063000 | 0 | None | None | Buildings | First Floor | 2310426.11 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2450939 | 74002 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7027.8 | 7027.8 | 9.63 | False | None | None | False | None | False | 67677.714 | 0 | | 2450940 | 74002 | None | form work | Centering for Columns | Cum | 4919.46 | 4919.46 | 9.63 | False | None | None | False | None | False | 47374.3998 | 0 | | 2450941 | 74002 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7027.8 | 7027.8 | 14.33 | False | None | None | False | None | False | 100708.374 | 0 | | 2450942 | 74002 | None | form work | Centering for Lintel, roof beams & Staircase | Cum | 4216.68 | 4216.68 | 14.33 | False | None | None | False | None | False | 60425.0244 | 0 | | 2450943 | 74002 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7027.8 | 7027.8 | 0.4 | False | None | None | False | None | False | 2811.12 | 0 | | 2450944 | 74002 | None | form work | Centering for chajja | Cum | 3162.51 | 3162.51 | 0.4 | False | None | None | False | None | False | 1265.004 | 0 | | 2450945 | 74002 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7027.8 | 7027.8 | 13.58 | False | None | None | False | None | False | 95437.524 | 0 | | 2450946 | 74002 | None | form work | Centering for Slab | Cum | 3513.9 | 3513.9 | 13.58 | False | None | None | False | None | False | 47718.762 | 0 | | 2450947 | 74002 | None | Vol.1-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including costofallmaterials,machinery,labour,cleaning,htening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings | MT | 94824.4 | 94824.4 | 3.98 | False | None | None | False | None | False | 377401.112 | 0 | | 2450948 | 74002 | None | Vol.2-6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Sqm | 8447.1 | 8447.1 | 67.74 | False | None | None | False | None | False | 572206.554 | 0 | | 2450949 | 74002 | None | Vol.2-11.34.B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. | Kgs | 194.0 | 194.0 | 190.08 | False | None | None | False | None | False | 36875.52 | 0 | | 2450950 | 74002 | None | Vol.2-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 53.0 | 53.0 | 19.44 | False | None | None | False | None | False | 1030.32 | 0 | | 2450951 | 74002 | None | Vol.2-8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 121.9 | 121.9 | 19.44 | False | None | None | False | None | False | 2369.736 | 0 | | 2450952 | 74002 | None | Vol.2-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1077.0 | 1077.0 | 3.0 | False | None | None | False | None | False | 3231.0 | 0 | | 2450953 | 74002 | None | Vol.2-11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steelmembers shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 598.9 | 598.9 | 72.9 | False | None | None | False | None | False | 43659.81 | 0 | | 2450954 | 74002 | None | Vol.2-12.52 | Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 819.4 | 819.4 | 6.0 | False | None | None | False | None | False | 4916.4 | 0 | | 2450955 | 74002 | None | Vol.2-8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) on concrete surface / ceilings including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charges | Sqm | 223.7 | 223.7 | 135.22 | False | None | None | False | None | False | 30248.714 | 0 | | 2450956 | 74002 | None | Vol.2-8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 312.85 | 312.85 | 465.83 | False | None | None | False | None | False | 145734.9155 | 0 | | 2450957 | 74002 | None | Vol.2-9.22.1 | Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm | Sqm | 1326.06 | 1326.06 | 151.64 | False | None | None | False | None | False | 201083.7384 | 0 | | 2450958 | 74002 | None | Vol.2-12.21 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6086.52 | 6086.52 | 7.56 | False | None | None | False | None | False | 46014.0912 | 0 | | 2450959 | 74002 | None | Vol.2-12.32 | Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6192.52 | 6192.52 | 8.64 | False | None | None | False | None | False | 53503.3728 | 0 | | 2450960 | 74002 | None | Vol.2-12.58 | Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete | No | 127.2 | 127.2 | 3.0 | False | None | None | False | None | False | 381.6 | 0 | | 2450961 | 74002 | None | Vol.2-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete | Nos | 251.22 | 251.22 | 24.0 | False | None | None | False | None | False | 6029.28 | 0 | | 2450962 | 74002 | None | Vol.2-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete | Nos | 137.8 | 137.8 | 42.0 | False | None | None | False | None | False | 5787.6 | 0 | | 2450963 | 74002 | None | Vol.2-12.71.1 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plat ing and fixing with necessary screws etc., complet Nickel plated mild steel piano hinges 1 mm thick 35 mm wide | Nos | 315.88 | 315.88 | 45.0 | False | None | None | False | None | False | 14214.6 | 0 | | 2450964 | 74002 | None | Vol.2-8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.22 | 145.22 | 429.34 | False | None | None | False | None | False | 62348.7548 | 0 | | 2450965 | 74002 | None | Vol.2-8.28 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 94.34 | 94.34 | 386.96 | False | None | None | False | None | False | 36505.8064 | 0 | | 2450966 | 74002 | None | Vol.2-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 56.18 | 56.18 | 36.45 | False | None | None | False | None | False | 2047.761 | 0 | | 2450967 | 74002 | None | Vol.2-8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 146.28 | 146.28 | 36.45 | False | None | None | False | None | False | 5331.906 | 0 | | 2450968 | 74002 | None | Vol.2-12.12 | Providing Mathi/nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 131654.1 | 131654.1 | 0.63 | False | None | None | False | None | False | 82942.083 | 0 | | 2450969 | 74002 | None | Vol.2-8.1.2 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 255.58 | 255.58 | 599.2 | False | None | None | False | None | False | 153143.536 | 0 |
| | 1707198063000 | 0 | None | None | Buildings | Head Room | 381632.11 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2450970 | 74003 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7094.1 | 7094.1 | 1.24 | False | None | None | False | None | False | 8796.684 | 0 | | 2450971 | 74003 | None | form work | Centering for Columns | Cum | 4965.87 | 4965.87 | 1.24 | False | None | None | False | None | False | 6157.6788 | 0 | | 2450972 | 74003 | None | Vol.1-2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7094.1 | 7094.1 | 2.82 | False | None | None | False | None | False | 20005.362 | 0 | | 2450973 | 74003 | None | form work | Centering for Slab | Cum | 3547.05 | 3547.05 | 2.82 | False | None | None | False | None | False | 10002.681 | 0 | | 2450974 | 74003 | None | Vol.1-2.11.a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including costofallmaterials,machinery,labour,cleaning,htening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings | MT | 95719.0 | 95719.0 | 0.32 | False | None | None | False | None | False | 30630.08 | 0 | | 2450975 | 74003 | None | Vol.2-6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Sqm | 8526.8 | 8526.8 | 22.75 | False | None | None | False | None | False | 193984.7 | 0 | | 2450976 | 74003 | None | Vol.2-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1087.12 | 1087.12 | 2.52 | False | None | None | False | None | False | 2739.5424 | 0 | | 2450977 | 74003 | None | Vol.2-8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) on concrete surface / ceilings including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charges | Sqm | 225.8 | 225.8 | 28.18 | False | None | None | False | None | False | 6363.044 | 0 | | 2450978 | 74003 | None | Vol.2-8.1.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 315.94 | 315.94 | 160.92 | False | None | None | False | None | False | 50841.0648 | 0 | | 2450979 | 74003 | None | Vol.2-8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 146.59 | 146.59 | 43.3 | False | None | None | False | None | False | 6347.347 | 0 | | 2450980 | 74003 | None | Vol.2-8.28 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 95.23 | 95.23 | 160.92 | False | None | None | False | None | False | 15324.4116 | 0 | | 2450981 | 74003 | None | Vol.2-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of
approved brand and manufacture on wood work (hard and soft wood)
including preparing the surface after thorougly cleaning oil, grease, dirt
and foreign matter, cost of materials, labour complete as per specifications
and as per directions of Engineer-in-charge. | Sqm | 56.71 | 56.71 | 5.67 | False | None | None | False | None | False | 321.5457 | 0 | | 2450982 | 74003 | None | Vol.2-8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 147.66 | 147.66 | 5.67 | False | None | None | False | None | False | 837.2322 | 0 | | 2450983 | 74003 | None | Vol.2-12.12 | Providing Mathi/nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 132896.1 | 132896.1 | 0.09 | False | None | None | False | None | False | 11960.649 | 0 | | 2450984 | 74003 | None | Vol.2-12.21 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6143.94 | 6143.94 | 1.0 | False | None | None | False | None | False | 6143.94 | 0 | | 2450985 | 74003 | None | Vol.2-8.2.1 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 258.11 | 258.11 | 43.3 | False | None | None | False | None | False | 11176.163 | 0 |
| | 1707198063000 | 0 | None | None | Buildings | Water Supply and Sanitation | 276885.6 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2450986 | 74004 | None | Vol.2-13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | l | 9.5 | 9.5 | 3000.0 | False | None | None | False | None | False | 28500.0 | 0 | | 2450987 | 74004 | None | Vol.2-13.31.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall.32 mm nominal dia Pipes. | Mtr | 420.0 | 420.0 | 100.0 | False | None | None | False | None | False | 42000.0 | 0 | | 2450988 | 74004 | None | Vol.2-13.31.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 20 mm nominal dia Pipes | Mtr | 254.1 | 254.1 | 120.0 | False | None | None | False | None | False | 30492.0 | 0 | | 2450989 | 74004 | None | Vol.2-13.3.2 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore | Each | 320.3 | 320.3 | 15.0 | False | None | None | False | None | False | 4804.5 | 0 | | 2450990 | 74004 | None | Vol.2-14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5128.2 | 5128.2 | 5.0 | False | None | None | False | None | False | 25641.0 | 0 | | 2450991 | 74004 | None | Vol.2-14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3236.1 | 3236.1 | 6.0 | False | None | None | False | None | False | 19416.6 | 0 | | 2450992 | 74004 | None | Vol.2-13.49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | m | 305.55 | 305.55 | 250.0 | False | None | None | False | None | False | 76387.5 | 0 | | 2450993 | 74004 | None | Vol.2-13.47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter | m | 206.85 | 206.85 | 240.0 | False | None | None | False | None | False | 49644.0 | 0 |
| | 1707198063000 | 0 | None | None | Buildings | Electrical Work | 453936.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2450994 | 74005 | None | Vol.6-1.2.1 | Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 19/20mm dia 2mm thick | Mtr | 66.0 | 66.0 | 700.0 | False | None | None | False | None | False | 46200.0 | 0 | | 2450995 | 74005 | None | Vol.6-1.3.2 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick | Mtr | 79.0 | 79.0 | 700.0 | False | None | None | False | None | False | 55300.0 | 0 | | 2450996 | 74005 | None | Vol.6-1.5.2 | Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - 25mm deep Junction box | Mtr | 49.0 | 49.0 | 20.0 | False | None | None | False | None | False | 980.0 | 0 | | 2450997 | 74005 | None | Vol.6-1.6.3 | Supplying and flush mounting teak wooden box without front plank,made of not less than 12 mm thick wood, after due groove cutting,finishing with necessary cement plastering complete.10" x 7" x 3" (254 x 178 x 76 mm)
| Each | 112.0 | 112.0 | 35.0 | False | None | None | False | None | False | 3920.0 | 0 | | 2450998 | 74005 | None | Vol.6-1.12 | Supplying And Fixing Metal Fan Box with Round Hook. | Nos | 160.0 | 160.0 | 30.0 | False | None | None | False | None | False | 4800.0 | 0 | | 2450999 | 74005 | None | Vol.6-2.1.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Short point upto 3Mtr
from tapping point to out let via switch | Point | 285.0 | 285.0 | 20.0 | False | None | None | False | None | False | 5700.0 | 0 | | 2451000 | 74005 | None | Vol.6-2.1.2 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch | Point | 394.0 | 394.0 | 20.0 | False | None | None | False | None | False | 7880.0 | 0 | | 2451001 | 74005 | None | Vol.6-2.1.3 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch | Point | 570.0 | 570.0 | 20.0 | False | None | None | False | None | False | 11400.0 | 0 | | 2451002 | 74005 | None | Vol.6-2.5.2 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 1.5 mm2 | Mtr | 72.0 | 72.0 | 700.0 | False | None | None | False | None | False | 50400.0 | 0 | | 2451003 | 74005 | None | Vol.6-2.5.3 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.4C x 1.5 mm2
| Mtr | 94.0 | 94.0 | 700.0 | False | None | None | False | None | False | 65800.0 | 0 | | 2451004 | 74005 | None | Vol.6-3.1.1 | Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way | Each | 128.0 | 128.0 | 10.0 | False | None | None | False | None | False | 1280.0 | 0 | | 2451005 | 74005 | None | vOL.6-3.14.2 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Two Way Switch | Nos | 70.0 | 70.0 | 20.0 | False | None | None | False | None | False | 1400.0 | 0 | | 2451006 | 74005 | None | Vol.6-3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 1 to 3 Module | Each | 137.0 | 137.0 | 120.0 | False | None | None | False | None | False | 16440.0 | 0 | | 2451007 | 74005 | None | Vol.6-3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 6 Module | Each | 175.0 | 175.0 | 120.0 | False | None | None | False | None | False | 21000.0 | 0 | | 2451008 | 74005 | None | Vol.6-3.8 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws | Sq CM | 0.41 | 0.41 | 40000.0 | False | None | None | False | None | False | 16400.0 | 0 | | 2451009 | 74005 | None | Vol.6-6.3.2 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.56" Sweep (1400 mm) Regular model | Each | 3031.0 | 3031.0 | 30.0 | False | None | None | False | None | False | 90930.0 | 0 | | 2451010 | 74005 | None | Vol.6-11.3.2 | Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W | Each | 690.0 | 690.0 | 40.0 | False | None | None | False | None | False | 27600.0 | 0 | | 2451011 | 74005 | None | Vol.6-13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot ight / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders | Each | 122.0 | 122.0 | 40.0 | False | None | None | False | None | False | 4880.0 | 0 | | 2451012 | 74005 | None | Vol.6-13.11 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality,mounted on a suitable size wooden board and wired | Each | 315.0 | 315.0 | 30.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2451013 | 74005 | None | Vol.6-5.18.8 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 1- Single Door II -Double Door Ill -Double Door - 12Way SP &N | Each | 3044.0 | 3044.0 | 4.0 | False | None | None | False | None | False | 12176.0 | 0 |
|
|
|---|