createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1707304435516 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2010.00 emd 160200.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 22-02-2024 17:00:00 tenderQueryClose 19-02-2024 16:00:00 technicalBidOpen 26-02-2024 16:30:00 publishedDate 08-02-2024 17:45:19 publishedByPost KSDB_EE_DIV_KLB publishedByUser KPE12060 - M A QAYOOM bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson M A QAYOOM splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8884492343 tenderSupplierList None
tenderSchedule	createdTs 1707304435549 version 4 createdDate None modifiedDate None tenderNumber KSDB/2023-24/BD/WORK_INDENT46 title CONSTRUCTION OF PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA description CONSTRUCTION OF PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA category WORKS categoryText Works ecv 8009668.89 deptName Karnataka Slum Development Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 7460 locationName KSDB Kalaburagi Division provisionalAmount 9772000.0 groupOverheadTotal 0.0 fileNumber KSDB/SB/RAICHUR/DIVOFF/2023-24/1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1707304436000 0 None None Buildings CONSTRUCTION OF PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA (CIVIL WORKS GF) 6863540.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2497648 75711 None ksdb01 K.P.W.D 1.4 (Vol. 1 Page No.5) Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges andsuch simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.2 Depth exceeding 1.5m, but not exceeding 3m. Cum 208.95 208.95 674.69 False None None False None False 140976.4755 0 2497649 75711 None ksdb02 K.P.W.D 2.1 (Vol. 1 Page No. 15) Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). 2.1.3 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. Cum 5831.7 5831.7 48.192 False None None False None False 281041.2864 0 2497650 75711 None ksdb03 K.P.W.D 2.5, 2.5.2 (Vol. 1 Page No. 17) Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.2.2.1 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 6495.3 6495.3 206.57 False None None False None False 1341734.121 0 2497651 75711 None ksdb05 K.P.W.D 5.2 (Vol. 2 Page No.9) Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5820.15 5820.15 105.3 False None None False None False 612861.795 0 2497652 75711 None ksdb06 K.P.W.D 1.10 (Vol. 1 Page No.7) Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications. Cum 128.1 128.1 674.69 False None None False None False 86427.789 0 2497653 75711 None ksdb07 K.P.W.D 1.11 (Vol. 1 Page No.7) Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete. Cum 2285.85 2285.85 299.98 False None None False None False 685709.283 0 2497654 75711 None ksdb08 K.P.W.D 6.5 (Vol. 2 Page No.13) Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9303.0 9303.0 69.43 False None None False None False 645907.29 0 2497655 75711 None ksdb09 K.P.W.D 8.3.2 (Vol. 2 Page No.41) Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 289.8 289.8 420.0 False None None False None False 121716.0 0 2497656 75711 None ksdb10 K.P.W.D 8.1.2 (Vol. 2 Page No.41) Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 207.9 207.9 665.3 False None None False None False 138315.87 0 2497657 75711 None ksdb11 K.P.W.D 8.29 (Vol. 2 Page No.45) Finishing walls with textured exterior paint of required shade : New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 218.4 218.4 420.0 False None None False None False 91728.0 0 2497658 75711 None ksdb12 K.P.W.D 8.33.1 (Vol. 2 Page No.46) Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 123.9 123.9 665.3 False None None False None False 82430.67 0 2497659 75711 None ksdb13 K.P.W.D 9.12 (Vol. 2 Page No.60) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm Sqm 1141.35 1141.35 122.31 False None None False None False 139598.5185 0 2497660 75711 None ksdb14 K.P.W.D 9.39 (Vol. 2 Page No.65) Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1088.85 1088.85 73.5 False None None False None False 80030.475 0 2497661 75711 None ksdb15 K.P.W.D 12.10 (Vol. 2 Page No.99) Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 247431.45 247431.45 0.07 False None None False None False 17320.2015 0 2497662 75711 None ksdb16 K.P.W.D 12.12 (Vol. 2 Page No.100) Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 79111.2 79111.2 0.36 False None None False None False 28480.032 0 2497663 75711 None ksdb17 K.P.W.D 12.16 (Vol. 2 Page No.100) Providing and fixing in position fully panelled Teak wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 9952.95 9952.95 3.15 False None None False None False 31351.7925 0 2497664 75711 None ksdb18 K.P.W.D 12.18 (Vol. 2 Page No.101) Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Sqm 4227.3 4227.3 15.12 False None None False None False 63916.776 0 2497665 75711 None ksdb19 K.P.W.D 12.90 (Vol. 2 Page No.112) Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7602.0 7602.0 28.08 False None None False None False 213464.16 0 2497666 75711 None ksdb20 K.P.W.D 12.57,12.57.3 (Vol. 2 Page No.106) Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. Sqm 4227.3 4227.3 6.3 False None None False None False 26631.99 0 2497667 75711 None ksdb21 K.P.W.D 15.1 (Vol. 2 Page No.133) Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charg Sqm 782.25 782.25 259.0 False None None False None False 202602.75 0 2497668 75711 None KSDB21 K.P.W.D 15.1 (Vol. 2 Page No.64) Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level , including cost of materials, labour and Usage charges of machinery complete as per specifications. Sqm 1087.0 1087.0 450.0 False None None False None False 489150.0 0 2497669 75711 None ksdb22 Appendix I - Additionalities for Formwork, Centering & Scaffolding Foundation Cum 519.64 519.64 102.59 False None None False None False 53309.8676 0 2497670 75711 None ksdb23 Appendix I - Additionalities for Formwork, Centering & Scaffolding Columns Cum 649.39 649.39 18.31 False None None False None False 11890.3309 0 2497671 75711 None ksdb24 Appendix I - Additionalities for Formwork, Centering & Scaffolding Beams & Lintels Cum 649.52 649.52 42.47 False None None False None False 27585.1144 0 2497672 75711 None ksdb25 Appendix I - Additionalities for Formwork, Centering & Scaffolding Roof Cum 649.53 649.53 43.2 False None None False None False 28059.696 0 2497673 75711 None KSDB27 Reinforcement Steel Cum 72.0 72.0 16962.5 False None None False None False 1221300.0 0 1707304436000 0 None None Buildings CONSTRUCTION OF PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA (ELECTRICAL WORK) 582523.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2497674 75712 None ksdb01 K.P.W.D 1.2 (SREW, Page No.1) Concealed Conduit System. Supplying heavy gauge PVC conduit pipe 40 mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. m 106.0 106.0 200.0 False None None False None False 21200.0 0 2497675 75712 None ksdb02 K.P.W.D 1.2.1 (SREW, Page No.1) Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/ PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. m 61.0 61.0 200.0 False None None False None False 12200.0 0 2497676 75712 None ksdb03 K.P.W.D 1.2.2 (SREW, Page No.1) Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/ PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. m 70.0 70.0 200.0 False None None False None False 14000.0 0 2497677 75712 None ksdb04 K.P.W.D 1.3.1 (SREW, Page No.1) Supplying heavy gauge PVC Conduit Pipe 19mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. m 75.0 75.0 200.0 False None None False None False 15000.0 0 2497678 75712 None ksdb05 K.P.W.D 1.3.2 (SREW, Page No.1) Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. m 80.0 80.0 50.0 False None None False None False 4000.0 0 2497679 75712 None ksdb06 K.P.W.D 2.2.1 (SREW, Page No.3) Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch box. Point 251.0 251.0 5.0 False None None False None False 1255.0 0 2497680 75712 None ksdb07 K.P.W.D 2.2.2 (SREW, Page No.3) Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box. Point 361.0 361.0 5.0 False None None False None False 1805.0 0 2497681 75712 None ksdb08 K.P.W.D 2.2.3 (SREW, Page No.3) Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box. Point 542.0 542.0 5.0 False None None False None False 2710.0 0 2497682 75712 None ksdb09 K.P.W.D 2.3.2 (SREW, Page No.3) Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2. m 26.0 26.0 200.0 False None None False None False 5200.0 0 2497683 75712 None ksdb10 K.P.W.D 2.3.3 (SREW, Page No.3) Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2. m 40.0 40.0 200.0 False None None False None False 8000.0 0 2497684 75712 None ksdb11 K.P.W.D 2.3.4 (SREW, Page No.3) Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 mm2. m 59.0 59.0 200.0 False None None False None False 11800.0 0 2497685 75712 None ksdb12 K.P.W.D 3.4.1 (SREW, Page No.5) Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-3Way. Each 123.0 123.0 15.0 False None None False None False 1845.0 0 2497686 75712 None ksdb13 K.P.W.D 3.4.3 (SREW, Page No.5) Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way. Each 212.0 212.0 15.0 False None None False None False 3180.0 0 2497687 75712 None ksdb14 K.P.W.D 3.4.4 (SREW, Page No.5) Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8Way. Each 250.0 250.0 15.0 False None None False None False 3750.0 0 2497688 75712 None ksdb15 K.P.W.D 3.4.5 (SREW, Page No.5) Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way. Each 325.0 325.0 15.0 False None None False None False 4875.0 0 2497689 75712 None ksdb16 K.P.W.D 3.5.1 (SREW, Page No.5) Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc. complete on the existing metal/PVC box. 1 to 3 Module. Each 152.0 152.0 15.0 False None None False None False 2280.0 0 2497690 75712 None ksdb17 K.P.W.D 3.5.3 (SREW, Page No.5) Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc. complete on the existing metal/PVC box. 6 Module. Each 244.0 244.0 15.0 False None None False None False 3660.0 0 2497691 75712 None ksdb18 K.P.W.D 3.5.4 (SREW, Page No.5) Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc. complete on the existing metal/PVC box. 8 Module. Each 302.0 302.0 15.0 False None None False None False 4530.0 0 2497692 75712 None ksdb19 K.P.W.D 3.5.6 (SREW, Page No.5) Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc. complete on the existing metal/PVC box. 16 to 18 Module. Each 403.0 403.0 15.0 False None None False None False 6045.0 0 2497693 75712 None ksdb20 K.P.W.D 3.6.1 (SREW, Page No.5) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch. Each 88.0 88.0 15.0 False None None False None False 1320.0 0 2497694 75712 None ksdb21 K.P.W.D 3.6.2 (SREW, Page No.5) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch. Each 152.0 152.0 15.0 False None None False None False 2280.0 0 2497695 75712 None ksdb22 K.P.W.D 3.6.3 (SREW, Page No.5) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket. Each 162.0 162.0 15.0 False None None False None False 2430.0 0 2497696 75712 None ksdb23 K.P.W.D 3.6.4 (SREW, Page No.5) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module. Each 313.0 313.0 15.0 False None None False None False 4695.0 0 2497697 75712 None ksdb24 K.P.W.D 3.6.10 (SREW, Page No.5) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch. Each 375.0 375.0 6.0 False None None False None False 2250.0 0 2497698 75712 None ksdb25 K.P.W.D 3.6.11 (SREW, Page No.5) Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket. Each 249.0 249.0 6.0 False None None False None False 1494.0 0 2497699 75712 None ksdb26 K.P.W.D 3.10.2 (SREW, Page No.6) Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws. Each 12.0 12.0 20.0 False None None False None False 240.0 0 2497700 75712 None ksdb27 K.P.W.D 1.12 (SREW, Page No.2) Supplying And Fixing Metal Fan Box with Round Hook. Each 163.0 163.0 15.0 False None None False None False 2445.0 0 2497701 75712 None ksdb28 K.P.W.D 3.14.6 (SREW, Page No.6) 6A Lamp Holder Each 63.0 63.0 15.0 False None None False None False 945.0 0 2497702 75712 None ksdb29 K.P.W.D 11.11.3 (SREW, Page No.38) Supplying & fixing of retrofit type - LED bulb 7W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater than25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Nos. 148.0 148.0 25.0 False None None False None False 3700.0 0 2497703 75712 None ksdb30 K.P.W.D 11.3.2 (SREW, Page No.34) Supplying of 2feet -PVC Batten with integrated LED tube 28W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 740.0 740.0 15.0 False None None False None False 11100.0 0 2497704 75712 None ksdb31 K.P.W.D 13.7.1 (SREW, Page No.45) Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders Each 119.0 119.0 35.0 False None None False None False 4165.0 0 2497705 75712 None ksdb32 K.P.W.D 6.3.1 (SREW, Page No.22) Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model. Each 2085.0 2085.0 15.0 False None None False None False 31275.0 0 2497706 75712 None ksdb33 K.P.W.D 13.12 (SREW, Page No.46) Extra length of GI pipe of class B 19mm dia for down rod. m 173.0 173.0 200.0 False None None False None False 34600.0 0 2497707 75712 None ksdb34 K.P.W.D 13.10 (SREW, Page No.46) Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 162.0 162.0 15.0 False None None False None False 2430.0 0 2497708 75712 None ksdb35 K.P.W.D 5.17.4 (SREW, Page No.13) Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP. Each 1103.0 1103.0 15.0 False None None False None False 16545.0 0 2497709 75712 None ksdb36 K.P.W.D 5.17.4 (SREW, Page No.13) Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN. Each 1777.0 1777.0 15.0 False None None False None False 26655.0 0 2497710 75712 None ksdb37 K.P.W.D 5.18.9 (SREW, Page No.13) Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 Way SP & N. Each 2067.0 2067.0 4.0 False None None False None False 8268.0 0 2497711 75712 None ksdb38 K.P.W.D 5.20.3 (SREW, Page No.13) Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 A 4 pole. Each 2826.0 2826.0 6.0 False None None False None False 16956.0 0 2497712 75712 None ksdb39 K.P.W.D 5.38 (SREW, Page No.14) Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 464.0 464.0 15.0 False None None False None False 6960.0 0 2497713 75712 None ksdb40 K.P.W.D 5.40.2 (SREW, Page No.15) Supplying 250A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., .complete. 4 x 30 x 10 mm Aluminium Strips. Each 3072.0 3072.0 6.0 False None None False None False 18432.0 0 2497714 75712 None ksdb41 K.P.W.D 5.42.2 (SREW, Page No.15) Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. Sq CM 0.38 0.38 90000.0 False None None False None False 34200.0 0 2497715 75712 None ksdb42 K.P.W.D 3.9 (SREW, Page No.6) Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. Sq CM 0.26 0.26 1200.0 False None None False None False 312.0 0 2497716 75712 None ksdb43 K.P.W.D 5.22 (SREW, Page No.14) Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. Each 407.0 407.0 6.0 False None None False None False 2442.0 0 2497717 75712 None ksdb44 K.P.W.D 5.22 (SREW, Page No.14) Supplying, fixing and wiring 0 to 100 A Direct Reading AC analog type Ammeter. Each 472.0 472.0 6.0 False None None False None False 2832.0 0 2497718 75712 None ksdb45 K.P.W.D 5.27 (SREW, Page No.14) Supplying, fixing and wiring rotary selector switch suitable for Ammeter. Each 178.0 178.0 6.0 False None None False None False 1068.0 0 2497719 75712 None ksdb46 K.P.W.D 5.28 (SREW, Page No.14) Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 146.0 146.0 6.0 False None None False None False 876.0 0 2497720 75712 None ksdb47 K.P.W.D 5.35 (SREW, Page No.14) Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 5125.0 5125.0 6.0 False None None False None False 30750.0 0 2497721 75712 None ksdb48 K.P.W.D 5.47 (SREW, Page No.16) Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. Each 2079.0 2079.0 6.0 False None None False None False 12474.0 0 2497722 75712 None ksdb49 K.P.W.D 12.2.1 (SREW, Page No.39) Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Each 239.0 239.0 6.0 False None None False None False 1434.0 0 2497723 75712 None ksdb50 K.P.W.D 12.2.1 (SREW, Page No.23) Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 1.5 Ton capacity Each 58900.0 58900.0 1.0 False None None False None False 58900.0 0 2497724 75712 None ksdb51 K.P.W.D 12.2.1 (SREW, Page No.29) Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete.3KVA Each 4434.0 4434.0 1.0 False None None False None False 4434.0 0 2497725 75712 None ksdb52 K.P.W.D 12.2.1 (SREW, Page No.29) Supplying, erecting, testing & commissioning of ON-LINE UPSsystem suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete andExcluding batteries and wiring complete. 3KVA Each 47973.0 47973.0 1.0 False None None False None False 47973.0 0 2497726 75712 None ksdb53 K.P.W.D 12.2.1 (SREW, Page No.30) Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150Ah Each 19436.0 19436.0 3.0 False None None False None False 58308.0 0 1707304436000 0 None None Buildings CONSTRUCTION OF PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA (ELEVATION WORK) 139018.76 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2497727 75713 None ksdb01 K.P.W.D 12.90 (Vol. 2 Page No.112) Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7240.0 7240.0 7.47 False None None False None False 54082.8 0 2497728 75713 None ksdb02 K.P.W.D 12.12 (Vol. 2 Page No.100) Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 75344.0 75344.0 0.05 False None None False None False 3767.2 0 2497729 75713 None ksdb03 K.P.W.D 12.15 (Vol. 2 Page No.100) Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures). Sqm 4556.0 4556.0 2.21 False None None False None False 10068.76 0 2497730 75713 None ksdb04 K.P.W.D 11.34B (Vol. 2 Page No.85) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 143.0 143.0 300.0 False None None False None False 42900.0 0 2497731 75713 None ksdb05 Wall Mount Fan Nos 3145.0 3145.0 3.0 False None None False None False 9435.0 0 2497732 75713 None ksdb6 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. Sqm 3753.0 3753.0 5.0 False None None False None False 18765.0 0 1707304436000 0 None None Buildings CONSTRUCTION OF PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA (PLUMBING) 424586.83 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2497733 75714 None KSDB01 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. (SR KPWD 2021-22, Vol - 1, Pg No 06, Item No 1.6.1) Cum 493.5 493.5 12.56 False None None False None False 6198.36 0 2497734 75714 None KSDB02 Providing and filling in foundation with granite/trap broken metal 100mm and down size and with approved sand including hand picking, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specification (SR KPWD 2021-22, Vol - 2, Sl no 07, Item No 6.40). 1st corrigendum and addendum 21.04.2022 Cum 2689.05 2689.05 0.819 False None None False None False 2202.33195 0 2497735 75714 None KSDB03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (SR KPWD 2021-22, Vol - 1, Pg No 15, Item No 2.1.3) Cum 5831.7 5831.7 0.819 False None None False None False 4776.1623 0 2497736 75714 None KSDB04 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (SR KPWD 2021-22, Vol - 2, Pg No 17, Item No 6.33) Cum 1120.35 1120.35 2.46 False None None False None False 2756.061 0 2497737 75714 None KSDB05 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (SR KPWD 2021-22, Vol - 1, Pg No 17, Item No 2.4.2). Cum 6266.4 6266.4 0.846 False None None False None False 5301.3744 0 2497738 75714 None KSDB06 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately. (SR KPWD 2021-22, Vol - 2, Pg No 84, Item No 11.32) Kg 96.6 96.6 300.0 False None None False None False 28980.0 0 2497739 75714 None KSDB07 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SR KPWD 2021-22, Vol - 2, Pg No 84, Item No 11.32) Sqm 313.95 313.95 20.0 False None None False None False 6279.0 0 2497740 75714 None KSDB08 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied at 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (SR KPWD 2021-22, Vol - 2, Pg No 134, Item No 15.60) Sqm 477.75 477.75 20.0 False None None False None False 9555.0 0 2497741 75714 None KSDB09 Providing and fixing rectangular high density polyethylene water storage loft tank with cover,conforming to ISI : 1271, colour of opaque white oras approved by Engineer-in-charge. The rate includes making necessary hole for inlet, outlet &over flow pipes. The base support i/c fittings & fixtures for tank shall be paid Separately. (SR KPWD 2021-22, Vol - 2, Item No 13.34A) Ltr 8.93 8.93 3000.0 False None None False None False 26790.0 0 2497742 75714 None KSDB10 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. (Common SR Water Supply and UGD works 21-22, Vol - 5, Pg No 158, Item no 7.4, POR Code: P070D) Nos 16786.35 16786.35 1.0 False None None False None False 16786.35 0 2497743 75714 None KSDB11 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes joining of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 25 MM(External works) (Volume-2, I.No.13.33.1 of KPWD S.R 2021-22) m 331.8 331.8 100.0 False None None False None False 33180.0 0 2497744 75714 None KSDB12 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes joining of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. 20 MM(External works) (Volume-2, I.No.13.33.1 of KPWD S.R 2021-22) m 250.95 250.95 100.0 False None None False None False 25095.0 0 2497745 75714 None KSDB13 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes joining of pipes and fittings with one step CPVC solvent cement and the cost of cuctting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 MM(External works) (Volume-2, I.No.13.33.2 of KPWD S.R 2021-22) m 321.3 321.3 200.0 False None None False None False 64260.0 0 2497746 75714 None KSDB14 Providing and fixing Brass full way valve gate with C.I. wheel ofapproved quality (screwed end) :(SR KPWD 2021-22, Vol - 2, Pg No 115, Item No 13.4.1) Nos 554.4 554.4 2.0 False None None False None False 1108.8 0 2497747 75714 None KSDB15 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (SR KPWD 2021-22, Vol - 2, Pg No 115, Item No 13.5.2) Nos 378.0 378.0 2.0 False None None False None False 756.0 0 2497748 75714 None KSDB16 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. (SR KPWD 2021-22, Vol - 2, Pg No 117, Item No 13.13) Nos 707.7 707.7 10.0 False None None False None False 7077.0 0 2497749 75714 None KSDB17 Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 (SR KPWD 2021-22, Vol - 2, Pg No 117, Item No 13.12) Nos 453.6 453.6 10.0 False None None False None False 4536.0 0 2497750 75714 None KSDB18 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (SR KPWD 2021-22, Vol - 2, Pg No 116, Item No 13.09.2) Nos 231.0 231.0 3.0 False None None False None False 693.0 0 2497751 75714 None KSDB19 Providing and fixing PTMT grating of approved quality and colour. (SR KPWD 2021-22, Vol - 2, Pg No 118, Item No 13.22.2, ) Nos 222.6 222.6 5.0 False None None False None False 1113.0 0 2497752 75714 None KSDB20 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. SR KPWD 2021-22, Vol - 2, Pg No 117, Item No 13.15, ) Nos 605.85 605.85 8.0 False None None False None False 4846.8 0 2497753 75714 None KSDB21 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (SR KPWD 2021-22, Vol - 2, Pg No 125, Item No 14.7A) Nos 3778.95 3778.95 4.0 False None None False None False 15115.8 0 2497754 75714 None KSDB22 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (SR KPWD 2021-22, Vol - 2, Pg No 126, Item No 14.10.1.1) Nos 5218.5 5218.5 1.0 False None None False None False 5218.5 0 2497755 75714 None KSDB23 Providing and fixing floor mounted, white vitreous china single piece double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (SR KPWD 2021-22, Vol - 2, Pg No 130, Item No 14.47) Nos 14376.6 14376.6 4.0 False None None False None False 57506.4 0 2497756 75714 None KSDB24 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge (SR KPWD 2021-22, Vol - 2, Pg No 127, Item No 14.16A) Nos 259.35 259.35 4.0 False None None False None False 1037.4 0 2497757 75714 None KSDB25 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete (SR KPWD 2021-22, Vol - 2, Pg No 129, Item No 14.33) Nos 743.4 743.4 15.0 False None None False None False 11151.0 0 2497758 75714 None KSDB26 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :(SR KPWD 2021-22, Vol - 2, Pg No 128, Item No 14.32.4) Nos 1549.8 1549.8 5.0 False None None False None False 7749.0 0 2497759 75714 None KSDB27 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: (CSR Water Supply and UGD Works 21-22, Pg No 134, Item No 1.5, SOR Code M010E) m 220.5 220.5 100.0 False None None False None False 22050.0 0 2497760 75714 None KSDB28 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: (CSR Water Supply and UGD Works 21-22, Pg No 134, Item No 1.5, SOR Code M010F) m 295.05 295.05 100.0 False None None False None False 29505.0 0 2497761 75714 None KSDB29 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 7.5 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. (CSR Water Supply and UGD Works 21-22, Pg No 187, Item No 8, SOR Code T130A) Nos 4592.7 4592.7 5.0 False None None False None False 22963.5 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1707304437000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1707304437000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1707304437000 1 None None ELIGIBILITY As per Karnataka state Government order No. LD/300/LET/2006 Bangalore dated 01.01.2007 and Government Letter No PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund None 1707379945000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1707380808000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1707380814000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. None 1707380822000 0 None None ELIGIBILITY To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender None 1707380828000 0 None None ELIGIBILITY All the Formats prescribed in the bid documents shall be filled in complete manner None 1707380834000 0 None None ELIGIBILITY The Tenderer should maintain the Work during defective liability period of 1 year None 1707380840000 0 None None ELIGIBILITY The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got attested by the Quality Control Authority before use on the work. None 1707380845000 0 None None ELIGIBILITY Work done certificate should be issued by competent authority not below the rank of Executive Engineer None 1707380852000 0 None None ELIGIBILITY The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labour, hire charges of machinery equipments etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work None 1707380873000 0 None None ELIGIBILITY Statement indicating (A) the total value of the civil engineering works executed and payment received in last 3 years (certified by the chartered accountant to be scanned and uploaded) (B)work performed as a prime contractor on works of similar nature during the last 3 years ( Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded)necessary details shall be uploaded as per the respective formats furnished along with the qualification information. None 1707380885000 0 None None ELIGIBILITY The Security deposit (including additional security for unbalanced tenders) shall be provided to the Employer no later than the date specified in the Letter of Acceptance and shall be issued in an amount and form and type of instrument acceptable to the Employer. The Security deposit shall be valid until a date 30 days from the date of expiry of Defects Liability Period and the additional security for unbalanced tenders shall be valid until a date 30 days from the date of issue of the certificate of completion None 1707380931000 0 None None ELIGIBILITY The tenderer should be a PWD registered Contractor - Class-1 None 1707380943000 0 None None ELIGIBILITY All Scanned Documents of the Original should be up-loaded, Executive Engineer reserves the right verify the Original Documents before approval, 0riginal documents / Certificates for qualification shall be produced when called for during evaluation of tender None 1707380952000 0 None None ELIGIBILITY To qualify for Award of this contract, each Tenderer in its name should have in the last three years i.e. 2018-19,2019-20,2020-21,2021-22,2022-23 satisfactorily completed similar nature of work as prime contractor, at least one similar work value not less than 50% of the amount put to tender. (Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded.) None 1707380960000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all tenders without assigning any reason None 1707380973000 0 None None ELIGIBILITY The department is not responsible for any delay in accessing kppp.karnataka.gov.in portal None 1707380987000 0 None None ELIGIBILITY Time for completion of work is 12 months None 1707380993000 0 None None ELIGIBILITY All terms and Conditions as per KW-3. None 1707380999000 0 None None ELIGIBILITY Asessed Tender Capacity shall be more than the Tendered Amount None 1707381134000 0 None None ELIGIBILITY liquid assets and /or availability of credit facilities (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc Line of credit from nationalised / scheduled bank at 30% of amount put to tender with name of the work None 1707381147000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should in the last five Years i.e. 2018-19,2019-20 , 2020-21, 2021-22, 2022-23 Achieved in at least Two financial years a average financial turnover (in all classes of civil engineering construction works only) not less than two times estimated cost. None 1707381155000 0 None None ELIGIBILITY Tenders from contractors who have not completed the works in time in any department, and/or having litigation history or financial failures etc. will not be considered None 1707381169000 0 None None ELIGIBILITY The details and other information will be made available in Executive Engineer, KSDB, Division Kalaburagi, office which can be collected during office hours. And also can see in the tender document None 1707381177000 0 None None ELIGIBILITY GST will be paid separately as per the prevailing rates,time to time govt rules. None 1707381182000 0 None None ELIGIBILITY If the tender has quoted below the schedule-B amount the difference amount in the form of DD/FDR/BG only duely scanning and uploading the same in the e-portal, and contractor should produce original less amount DD Should submit at the time of agreement. None 1707381187000 0 None None ELIGIBILITY Mandatorily, the tenderer should visit the proposed site and submit the feasibility report regarding men, material and completion of work to Assistant executive engineer within last date of receipt of tender and same should be uploaded along with the technical bid. Failing to comply with these norms will make the tender liable to rejection. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Scanned Copy of documentary proof mandating satisfactory completion as a prime contractor for having executed a similar nature of Construction of PROPOSED SUB DIVISIONAL OFFICE OF KARNATAKA SLUM DEVELOPMENT BOARD AT RAICHUR CITY, KARNATAKA of amount at least 50% of the estimated cost Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one Financial year, the following minimum quantities of work (usually 80% of the peak annual rate of construction) 1) Earth work excavation - 539.75 Cum 2) Position plain cement concrete -38.55 Cum 3)RCC Concrete- 165.24Cum 4)Brick work with common burn clay-55.54 Cum 5)centering & Scaffolding-165.25 Cum 6)Reinforcement Steel-13640.00 Kg Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for Award of this contract, each Tenderer in its name should have in the last three years i.e. 2018-19,2019-20,2020-21,2021-22,2022-23 satisfactorily completed similar nature of work as prime contractor, at least one similar work value not less than 50% of the amount put to tender. (Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded.) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Critical equipment available (Minimum 50% of the required machinery should be owned by Tenderer. Remaining 50% of the required machinery may be owned/procured on Lease basis/Hire basis) Vibrators - 04 Nos. Concrete mixer machine- 02 Nos. Water tanker -02 Nos. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Critical equipments None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover of two times of estimated cost put to tender(In all classes of civil engineering construction works). Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- financial turnover None None None None If the tender has quoted below the schedule-B amount the difference amount in the form of DD/FDR/BG only duly scanning and uploading the same in the e-portal, and the contractor should produce the original less amount DD Should submit at the time of agreement. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- difference amount in the form of DD/FDR/BG None None None None liquid assets and /or availability of credit facilities (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc Line of credit from nationalised / scheduled bank at 30% of amount put to tender with name of the work Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None contractor should provide the 1.project engineer with B.E Civil with 10 Years of experience 01 number. & 2.site engineer with B.E Civil with 05 years of experience 02 Number Others key personnel createdTs version createdDate modifiedDate documentName None None None None Others -- key personnel None None None None Mandatorily, the tenderer should visit the proposed site and submit the feasibility report regarding men, material and completion of work to Assistant executive engineer within last date of receipt of tender and same should be uploaded along with the technical bid. Failing to comply with these norms will make the tender liable to rejection Others site visit letter createdTs version createdDate modifiedDate documentName None None None None Others -- others- site visit letter
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None