| 1707573565000 | 0 | None | None | Buildings | Construction of toilet to HPS school no 2 and renuation of library at aminagad | 245735.92 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2544099 | 77878 | None | ITEM01 | 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a prim- ing coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ( COMMON SCHEDULE OF RATES 2021-22, P.No - 5. I.No - 1.4.1 ) | Kg | 108.0 | 108.0 | 600.0 | False | None | None | False | None | False | 64800.0 | 0 | | 2544100 | 77878 | None | ITEM02 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ( COMMON SCHEDULE OF RATES 2021-22, P.No - 15. I.No - 2.1.3 ) | Sqm | 556.0 | 556.0 | 144.0 | False | None | None | False | None | False | 80064.0 | 0 | | 2544101 | 77878 | None | ITEM03 | Earth work excavation by manual means for drains,canals and similar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, re- moval of stumps and other deleterious matter, excavated surface lev- eled and sides neatly dressed disposing off the excavated stuff or sort- ing & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work In all kinds of soils Depth upto 1.5 m ( COMMON SCHEDULE OF RATES 2021-22, P.No - 5. I.No - 1.4.1 ) | Cum | 191.58 | 191.58 | 7.2 | False | None | None | False | None | False | 1379.376 | 0 | | 2544102 | 77878 | None | ITEM04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates ( COMMON SCHEDULE OF RATES 2021-22, P.No - 15. I.No - 2.1.3 ) | Cum | 5924.56 | 5924.56 | 0.9 | False | None | None | False | None | False | 5332.104 | 0 | | 2544103 | 77878 | None | ITEM05 | 6.1 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 7043.0 | 7043.0 | 2.58 | False | None | None | False | None | False | 18170.94 | 0 | | 2544104 | 77878 | None | ITEM06 | 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, P No 41 providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 307.0 | 307.0 | 30.8 | False | None | None | False | None | False | 9455.6 | 0 | | 2544105 | 77878 | None | ITEM07 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge. (Item no:8.55.1 ,page no:51, PWD SR vol2 2021-22) | Sqm | 42.33 | 42.33 | 30.8 | False | None | None | False | None | False | 1303.764 | 0 | | 2544106 | 77878 | None | ITEM08 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (Item no:8.53.2 ,page no:50, PWD SR vol2 2021-22) | Sqm | 76.22 | 76.22 | 30.8 | False | None | None | False | None | False | 2347.576 | 0 | | 2544107 | 77878 | None | ITEM09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates ( COMMON SCHEDULE OF RATES 2021-22, P.No - 15. I.No - 2.1.3 ) | Cum | 6417.93 | 6417.93 | 1.23 | False | None | None | False | None | False | 7894.0539 | 0 | | 2544108 | 77878 | None | ITEM10 | As per recommendations of Technical working group, rates for formwork shall be added
on percentage basis to the finished concrete item rate .For drain form works consider 5%( PWD.SR. 2021-22 Vol II, P.No - A-7 I.No - 22.2 )Foundation, Sub structure | Cum | 330.52 | 330.52 | 1.23 | False | None | None | False | None | False | 406.5396 | 0 | | 2544109 | 77878 | None | ITEM11 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation/Substructure/Superstructure complete as per Drawing and Technical Specifications.( PWD.SR. 2021-22 Vol III, P.No - 71 I.No - 9.3. ) revised rate order Dtd: 07/04/2022 | Tonne | 97123.85 | 97123.85 | 0.09 | False | None | None | False | None | False | 8741.1465 | 0 | | 2544110 | 77878 | None | ITEM12 | 5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement
: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :5.2 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( COMMON SCHEDULE OF RATES 2021-22, P.No - 9. I.No - 5.20 ) | Cum | 5611.0 | 5611.0 | 1.42 | False | None | None | False | None | False | 7967.62 | 0 | | 2544111 | 77878 | None | ITEM13 | Electrical Connection Fittings and Hescom charges | Nos | 2000.0 | 2000.0 | 1.0 | False | None | None | False | None | False | 2000.0 | 0 | | 2544112 | 77878 | None | ITEM14 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.(Item no:9.10 ,page no:60, PWD SR vol2 2021-22) | Sqm | 647.87 | 647.87 | 11.4 | False | None | None | False | None | False | 7385.718 | 0 | | 2544113 | 77878 | None | ITEM15 | Providing and fixing Factory | Sqm | 235.87 | 235.87 | 1.0 | False | None | None | False | None | False | 235.87 | 0 | | 2544114 | 77878 | None | ITEM16 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam(Item no:12.55.2, page no:106, PWD SOR vol2 2021-22) | Cum | 2948.61 | 2948.61 | 1.89 | False | None | None | False | None | False | 5572.8729 | 0 | | 2544115 | 77878 | None | ITEM17 | Providing and fixing in position fully glazed shutters for ventilators side hung or central pivoted with Mathi/Nandi wood stiles and rails of 30mm thick 50mm wide and central divider of 30mm. wide, 3mm thick reeded glass fixed with wooden beading of size 10mm wide flushed to the thickness of the frame including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures)(Item no:12.50, page no:105, PWD SR vol2 2021-22) | Sqm | 4101.6 | 4101.6 | 0.36 | False | None | None | False | None | False | 1476.576 | 0 | | 2544116 | 77878 | None | ITEM18 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(Item no:14.1.1 ,page no:123, PWD SR vol2 2021-22) | Nos | 4373.38 | 4373.38 | 1.0 | False | None | None | False | None | False | 4373.38 | 0 | | 2544117 | 77878 | None | ITEM19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Item no:14.7.1, page no:124, PWD SR vol2 2021-22) | Nos | 2604.87 | 2604.87 | 1.0 | False | None | None | False | None | False | 2604.87 | 0 | | 2544118 | 77878 | None | ITEM20 | KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 (Item no:13.78, page no:96, PWD SR 2018-19) | Nos | 7032.84 | 7032.84 | 1.0 | False | None | None | False | None | False | 7032.84 | 0 | | 2544119 | 77878 | None | ITEM21 | Providing and fixing brass stop cock of approved quality :20 mm nominal bore. (Item no:13.3.2, page no:128, PWD SOR vol2 2021-22) | Nos | 211.15 | 211.15 | 1.0 | False | None | None | False | None | False | 211.15 | 0 | | 2544120 | 77878 | None | ITEM22 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover... (Item no:10, page no:187, PWD SOR vol5 2021-22) | Nos | 3979.92 | 3979.92 | 1.0 | False | None | None | False | None | False | 3979.92 | 0 | | 2544121 | 77878 | None | ITEM23 | Providing Plumbing and water supply Connections | Nos | 3000.0 | 3000.0 | 1.0 | False | None | None | False | None | False | 3000.0 | 0 |
|