| 1706938753000 | 0 | None | None | Other Works | Construction of Public Toilet(Aspirational) near KSRTC Bus stop | 1103629.44 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2412544 | 72196 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work PWD CSR 2023-24, Vol-I, P. No. 8, I. No. 1.14.1 | Cum | 107.1 | 107.1 | 24.79 | False | None | None | False | None | False | 2655.009 | 0 | | 2412545 | 72196 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.1.3 | Cum | 6288.45 | 6288.45 | 6.348 | False | None | None | False | None | False | 39919.0806 | 0 | | 2412546 | 72196 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD CSR 2023-24, Vol-II, P. No. 9, I. No. 5.4 | Cum | 6708.45 | 6708.45 | 10.69 | False | None | None | False | None | False | 71713.3305 | 0 | | 2412547 | 72196 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD CSR 2023-24, Vol-I, P. No. 7, I. No. 1.9 | Cum | 279.3 | 279.3 | 7.66 | False | None | None | False | None | False | 2139.438 | 0 | | 2412548 | 72196 | None | code05 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD CSR 2023-24, Vol-I, P. No. 7, I. No. 1.1 | Cum | 454.65 | 454.65 | 7.661 | False | None | None | False | None | False | 3483.07365 | 0 | | 2412549 | 72196 | None | code06 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 15, I. No. 2.2.1 | Cum | 6601.35 | 6601.35 | 1.188 | False | None | None | False | None | False | 7842.4038 | 0 | | 2412550 | 72196 | None | code07 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.4.2 | Cum | 9958.72 | 9958.72 | 2.4345 | False | None | None | False | None | False | 24244.50384 | 0 | | 2412551 | 72196 | None | code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.5.1 | Cum | 11138.4 | 11138.4 | 1.2834 | False | None | None | False | None | False | 14295.02256 | 0 | | 2412552 | 72196 | None | code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24, Vol-I, P. No. 16, I. No. 2.5.1 | Cum | 11138.4 | 11138.4 | 4.571 | False | None | None | False | None | False | 50913.6264 | 0 | | 2412553 | 72196 | None | code10 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - For Buildings PWD CSR 2023-24, Vol-I, P. No. 18, I. No. 2.11a | Tonne | 93929.85 | 93929.85 | 0.714 | False | None | None | False | None | False | 67065.9129 | 0 | | 2412554 | 72196 | None | code11 | Providing Brick work with Non Modular fly ash bricks conforming to IS:12894, class designation 5.0 average compressive strength in super structure above plinth level up to floor I level in Cement mortar 1:6 (1cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD CSR 2023-24, Vol-II, P. No. 13, I. No. 6.25 | Cum | 8008.35 | 8008.35 | 15.87 | False | None | None | False | None | False | 127092.5145 | 0 | | 2412555 | 72196 | None | code12 | Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS :12894, in super structure above plinth and upto floor I level cement mortar 1 : 3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.. . PWD CSR 2023-24, Vol-II, P. No. 13, I. No. 6.29 | Sqm | 1037.4 | 1037.4 | 12.24 | False | None | None | False | None | False | 12697.776 | 0 | | 2412556 | 72196 | None | code13 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD CSR 2023-24, Vol-II, P. No. 41, I. No. 8.4.2 | Sqm | 327.6 | 327.6 | 107.194 | False | None | None | False | None | False | 35116.7544 | 0 | | 2412557 | 72196 | None | code14 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD CSR 2023-24, Vol-II, P. No. 42, I. No. 8.7 | Sqm | 384.3 | 384.3 | 70.02 | False | None | None | False | None | False | 26908.686 | 0 | | 2412558 | 72196 | None | code15 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) PWD CSR 2023-24, Vol-II, P. No. 46, I. No. 8.33.1 | Sqm | 165.9 | 165.9 | 177.21 | False | None | None | False | None | False | 29399.139 | 0 | | 2412559 | 72196 | None | code16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. PWD CSR 2023-24, Vol-II, P. No. 60, I. No. 9.10 | Sqm | 1161.3 | 1161.3 | 13.5 | False | None | None | False | None | False | 15677.55 | 0 | | 2412560 | 72196 | None | code17 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. PWD CSR 2023-24, Vol-II, P. No. 63, I. No. 9.24 | Sqm | 2994.6 | 2994.6 | 9.899 | False | None | None | False | None | False | 29643.5454 | 0 | | 2412561 | 72196 | None | code18 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels - Area of slab over 0.50 m2 PWD CSR 2023-24, Vol-II, P. No. 69, I. No. 10.1.2 | Sqm | 4133.85 | 4133.85 | 4.62 | False | None | None | False | None | False | 19098.387 | 0 | | 2412562 | 72196 | None | code19 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023-24, Vol-II, P. No. 71, I. No. 10.14 | Sqm | 1161.3 | 1161.3 | 18.0 | False | None | None | False | None | False | 20903.4 | 0 | | 2412563 | 72196 | None | code20 | Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1 sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete - For Straight Portion PWD CSR 2023-24, Vol-II, P. No. 71, I. No. 10.15.1 | Sqm | 4188.45 | 4188.45 | 10.8 | False | None | None | False | None | False | 45235.26 | 0 | | 2412564 | 72196 | None | code21 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications PWD CSR 2023-24, Vol-II, P. No. 85, I. No. 11.28 | Kg | 593.25 | 593.25 | 70.4 | False | None | None | False | None | False | 41764.8 | 0 | | 2412565 | 72196 | None | code22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. PWD CSR 2023-24, Vol-II, P. No. 86, I. No. 11.34B | Kgs | 192.15 | 192.15 | 11.34 | False | None | None | False | None | False | 2178.981 | 0 | | 2412566 | 72196 | None | code23 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos.
stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.83.2 | m | 250.95 | 250.95 | 35.4 | False | None | None | False | None | False | 8883.63 | 0 | | 2412567 | 72196 | None | code24 | Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 111, I. No. 12.92 | Sqm | 6557.25 | 6557.25 | 15.84 | False | None | None | False | None | False | 103866.84 | 0 | | 2412568 | 72196 | None | code25 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.84 | Sqm | 5274.15 | 5274.15 | 0.54 | False | None | None | False | None | False | 2848.041 | 0 | | 2412569 | 72196 | None | code26 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2023-24, Vol-II, P. No. 109, I. No. 12.85 | Sqm | 6004.95 | 6004.95 | 1.619 | False | None | None | False | None | False | 9722.01405 | 0 | | 2412570 | 72196 | None | code27 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm diasteel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge. PWD CSR 2023-24, Vol-II, P. No. 77, I. No. 11.3 | Sqm | 8689.8 | 8689.8 | 4.32 | False | None | None | False | None | False | 37539.936 | 0 | | 2412571 | 72196 | None | code28 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. PWD CSR 2023-24, Vol-II, P. No. 15, I. No. 2.1.6 | Cum | 6555.15 | 6555.15 | 1.944 | False | None | None | False | None | False | 12743.2116 | 0 | | 2412572 | 72196 | None | code29 | Water proofing materials PWD CSR 2023-24, Vol-II, P. No.A-43 I. No.1028 | Kgs | 46.2 | 46.2 | 50.0 | False | None | None | False | None | False | 2310.0 | 0 | | 2412573 | 72196 | None | code30 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length, 20mm NB PWD CSR 2023-24, Vol-II, P. No. 118, I. No. 13.8.2.2 | No | 115.5 | 115.5 | 4.0 | False | None | None | False | None | False | 462.0 | 0 | | 2412574 | 72196 | None | code31 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 100 mm diameter PWD CSR 2023-24, Vol-II, P. No. 118, I. No. 13.9.1 | No | 269.85 | 269.85 | 4.0 | False | None | None | False | None | False | 1079.4 | 0 | | 2412575 | 72196 | None | code32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.32.3 | m | 500.85 | 500.85 | 20.0 | False | None | None | False | None | False | 10017.0 | 0 | | 2412576 | 72196 | None | code33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work PWD CSR 2023-24, Vol-II, P. No. 122, I. No. 13.33.4 | m | 390.6 | 390.6 | 20.0 | False | None | None | False | None | False | 7812.0 | 0 | | 2412577 | 72196 | None | code34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023-24, Vol-II, P. No. 123, I. No. 13.34 | l | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2412578 | 72196 | None | code35 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 100 mm diameter PWD CSR 2023-24, Vol-II, P. No. 125, I. No. 13.48 | m | 305.55 | 305.55 | 14.4 | False | None | None | False | None | False | 4399.92 | 0 | | 2412579 | 72196 | None | code36 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete PWD CSR 2023-24, Vol-II, P. No. 127, I. No. 13.59 | Each | 231.0 | 231.0 | 30.0 | False | None | None | False | None | False | 6930.0 | 0 | | 2412580 | 72196 | None | code37 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm (PWD CSR 2023-24, Vol-II, P. No. 202, I. No. 20.44.2) | Each | 3724.35 | 3724.35 | 2.0 | False | None | None | False | None | False | 7448.7 | 0 | | 2412581 | 72196 | None | code38 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid PWD CSR 2023-24, Vol-II, P. No. 131, I. No. 14.3.1 | Each | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 | | 2412582 | 72196 | None | code39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD CSR 2023-24, Vol-II, P. No. 132, I. No. 14.7.1 | Each | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 | | 2412583 | 72196 | None | code40 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm (PWD CSR 2023-24, Vol-II, P. No. 136, I. No. 14.32.4) | Each | 1812.3 | 1812.3 | 2.0 | False | None | None | False | None | False | 3624.6 | 0 | | 2412584 | 72196 | None | code41 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy Class PWD CSR 2023-24, Vol-II, P. No. 139, I. No. 14.55a | No | 1172.85 | 1172.85 | 10.0 | False | None | None | False | None | False | 11728.5 | 0 | | 2412585 | 72196 | None | code42 | Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy PWD CSR 2023-24, Vol-II, P. No. 140, I. No. 14.60a | No | 4184.25 | 4184.25 | 2.0 | False | None | None | False | None | False | 8368.5 | 0 | | 2412586 | 72196 | None | code43 | Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy PWD CSR 2023-24, Vol-II, P. No. 144, I. No. 14.89a | No | 1325.1 | 1325.1 | 4.0 | False | None | None | False | None | False | 5300.4 | 0 | | 2412587 | 72196 | None | code44 | Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy PWD CSR 2023-24, Vol-II, P. No. 144, I. No. 14.85a | No | 1833.3 | 1833.3 | 2.0 | False | None | None | False | None | False | 3666.6 | 0 | | 2412588 | 72196 | None | code45 | Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy PWD CSR 2023-24, Vol-II, P. No. 145, I. No. 14.93a | Each | 880.95 | 880.95 | 4.0 | False | None | None | False | None | False | 3523.8 | 0 | | 2412589 | 72196 | None | code46 | Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp grade marine ply as per IS 710 of approved brand complete as per direction of engineer in-charge.(Payment for providing and fixing auto closing hinges shall be paid separately) PWD CSR 2023-24, Vol-II, P. No. 217, I. No. 22.3 | Sqm | 3108.0 | 3108.0 | 2.16 | False | None | None | False | None | False | 6713.28 | 0 | | 2412590 | 72196 | None | code47 | Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2022 with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. Aluminium Alloy Plate for Over Head Sign (PWD CSR 2023-24, Vol-II, P. No. 136, I. No.8.9) | Sqm | 6108.9 | 6108.9 | 1.44 | False | None | None | False | None | False | 8796.816 | 0 | | 2412591 | 72196 | None | code48 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (PWD CSR 2023-24, Vol-II, P. No. 131, I. No. 14.4.1) | Each | 4676.7 | 4676.7 | 2.0 | False | None | None | False | None | False | 9353.4 | 0 | | 2412592 | 72196 | None | code49 | Earth work excavation for pipeline trenches in all kinds of soils by mechanicalmeans as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading, caution lights, bracing, usingsight rails & bonding rods at every 100 mm wherever necessary as directed,removal of stumps and other deleterious matter, dressing of sides and levellingthe bottom of trench to the extent required , utilising the available excavatedearth locally for the work etc., and all other appurtenances complete in thefollowing strata. (p.no.10.i.no.1.17.1) COMMON SCHEDULE OF RATES 2023-24 TECHNICAL WORKING GROUP VOLUME-I | Cum | 275.1 | 275.1 | 8.1 | False | None | None | False | None | False | 2228.31 | 0 | | 2412593 | 72196 | None | code50 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof includingjointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from theexcavationetc. complete. 6 Kg/m2: 200mm(weight of pipe -6.233 kg) (p.no.120. it.no 10.14.14) 2023-24 WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES VOLUME-V | m | 996.01 | 996.01 | 15.0 | False | None | None | False | None | False | 14940.15 | 0 | | 2412594 | 72196 | None | code51 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming afterwatering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (p.no.7.i.no.1.10) COMMON SCHEDULE OF RATES 2023-24 TECHNICAL WORKING GROUP VOLUME-I | Cum | 168.0 | 168.0 | 8.1 | False | None | None | False | None | False | 1360.8 | 0 | | 2412595 | 72196 | None | code52 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick (P.no.2.it.no.1.1.1) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 69.0 | 69.0 | 100.0 | False | None | None | False | None | False | 6900.0 | 0 | | 2412596 | 72196 | None | code53 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box (P.no.2.it.no.1.5) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 49.0 | 49.0 | 10.0 | False | None | None | False | None | False | 490.0 | 0 | | 2412597 | 72196 | None | code54 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8" x 6" x 3" (203 x 152 x 76 mm) (P.no.3.it.no.1.6.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 86.0 | 86.0 | 6.0 | False | None | None | False | None | False | 516.0 | 0 | | 2412598 | 72196 | None | code55 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 4" x 4" x 3" ( 101 x 101 x 76 mm) (P.no.3.it.no.1.6.6) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 74.0 | 74.0 | 24.0 | False | None | None | False | None | False | 1776.0 | 0 | | 2412599 | 72196 | None | code56 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm (P.no.5.it.no.2.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 26.0 | 26.0 | 150.0 | False | None | None | False | None | False | 3900.0 | 0 | | 2412600 | 72196 | None | code57 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm (P.no.5.it.no.2.3.3) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 42.0 | 42.0 | 100.0 | False | None | None | False | None | False | 4200.0 | 0 | | 2412601 | 72196 | None | code58 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 63.0 | 63.0 | 100.0 | False | None | None | False | None | False | 6300.0 | 0 | | 2412602 | 72196 | None | code59 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way (P.no.9.it.no.3.6.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 102.0 | 102.0 | 30.0 | False | None | None | False | None | False | 3060.0 | 0 | | 2412603 | 72196 | None | code60 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. (P.no.9.it.no.3.6.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 166.0 | 166.0 | 10.0 | False | None | None | False | None | False | 1660.0 | 0 | | 2412604 | 72196 | None | code61 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch (P.no.9.it.no.3.6.7) .(PWD CSR for Electrical Works for the Year 2023-24) | Each | 180.0 | 180.0 | 3.0 | False | None | None | False | None | False | 540.0 | 0 | | 2412605 | 72196 | None | code62 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. (P.no.9.it.no.3.6.9) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 326.0 | 326.0 | 4.0 | False | None | None | False | None | False | 1304.0 | 0 | | 2412606 | 72196 | None | code63 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (P.no.9.it.no.3.8) (PWD CSR for Electrical Works for the Year 2023-24) | Sqm | 0.41 | 0.41 | 2000.0 | False | None | None | False | None | False | 820.0 | 0 | | 2412607 | 72196 | None | code64 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps (P.no.10.it.no.5.7.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 241.0 | 241.0 | 6.0 | False | None | None | False | None | False | 1446.0 | 0 | | 2412608 | 72196 | None | code65 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps SP (p.no.17.it.no.5.18) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 415.0 | 415.0 | 2.0 | False | None | None | False | None | False | 830.0 | 0 | | 2412609 | 72196 | None | code66 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP .(p.no.17.it.no.5.18.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 | | 2412610 | 72196 | None | code67 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N (p.no.18.it.no.5.19.3)(PWD CSR for Electrical Works for the Year 2023-24) | Each | 1492.0 | 1492.0 | 2.0 | False | None | None | False | None | False | 2984.0 | 0 | | 2412611 | 72196 | None | code68 | PVC Batten with LED Tubes Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w (p.no.43.it.no.11.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 690.0 | 690.0 | 6.0 | False | None | None | False | None | False | 4140.0 | 0 | | 2412612 | 72196 | None | code69 | LED Down Lights Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W (p.no.43.it.no.11.5.3) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 1324.0 | 1324.0 | 6.0 | False | None | None | False | None | False | 7944.0 | 0 | | 2412613 | 72196 | None | code70 | Lamp Holder Supplying & Fixing of 70-150 Watts lamp holder 2 Pin (p.no.52.it.no.12.46) (PWD CSR for Electrical Works for the Year 2023-24) | Nos | 63.0 | 63.0 | 12.0 | False | None | None | False | None | False | 756.0 | 0 | | 2412614 | 72196 | None | code71 | Fixing all type of Luminaries Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders (p.no.56.it.no.13.7.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 122.0 | 122.0 | 12.0 | False | None | None | False | None | False | 1464.0 | 0 | | 2412615 | 72196 | None | code72 | Fixing of LED Lights Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps..(p.no.58.it.no.13.19) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 490.0 | 490.0 | 6.0 | False | None | None | False | None | False | 2940.0 | 0 | | 2412616 | 72196 | None | code73 | Supplyingexhaustfanof1440RPMof300mm(12")sizewithbracketbladescompleteforlightdutysuitabletooperateon230V50Hz, AC Supply. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.6.1) | Each | 1492.0 | 1492.0 | 5.0 | False | None | None | False | None | False | 7460.0 | 0 | | 2412617 | 72196 | None | code74 | Supplying,fixingandwiringElectronicTrivectorMeter(ETV)5to32/63Athreephase4wirewholecurrentclass-1AccuracyEnergyMeter. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.5.35) | Each | 5705.0 | 5705.0 | 1.0 | False | None | None | False | None | False | 5705.0 | 0 | | 2412618 | 72196 | None | code75 | Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall-roundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia . (PWD CSR for Electrical Works for the Year 2023-24 P.no.54.it.no.12.56) | No | 3510.0 | 3510.0 | 2.0 | False | None | None | False | None | False | 7020.0 | 0 | | 2412619 | 72196 | None | code76 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and 1.00 HP/0.75KW 7 STG (p.no.149. it.no 13.6.1) 2023-24 WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES VOLUME-V) | Each | 14605.5 | 14605.5 | 1.0 | False | None | None | False | None | False | 14605.5 | 0 |
|