| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1707889006000 | 0 | None | None | Other Works | Providing 5 HP motor for open well at Gandhi ground and construction of wall, Providing chain link and Providing Rolling Shutter, Roof for filter unit at Ambedkar circle in the limit of TMC Terdal | 36771.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2582317 | 80096 | None | 001 | Providing supplying & installation of three phase open well submersible pumpeset of approved make as filter feed pump with required accessories etc complete fuies and fuse box starter and penal bord ELBC MCB electrical cables from board to motor piping for suction and delivery abd for connection to the filter unit and rubber sheet support for pump and confirmimg to the following specifiction do for openwell (RWS 2019-20 Glb P.No 12.1 I.No V) | No | 36771.0 | 36771.0 | 1.0 | False | None | None | False | None | False | 36771.0 | 0 |
| | 1707889006000 | 0 | None | None | Other Works | Repairing of RO Plant roof and roling shuter at Ambedkar circle | 95397.86 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2582318 | 80097 | None | 001 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. G.S. Sheet | Sqm | 112.27 | 112.27 | 24.66 | False | None | None | False | None | False | 2768.5782 | 0 | | 2582319 | 80097 | None | 002 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( PWD SR 2023-24 Vol- 2 , P.No -47 I No - 8.33.3) | Sqm | 143.17 | 143.17 | 49.86 | False | None | None | False | None | False | 7138.4562 | 0 | | 2582320 | 80097 | None | 003 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277,
in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.( PWD SR 2023-24 Vol- 2 , P.No -26 I No - 7.38) | Sqm | 585.04 | 585.04 | 24.66 | False | None | None | False | None | False | 14427.0864 | 0 | | 2582321 | 80097 | None | 004 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24 Vol- 2 , P.No -77 I No - 11.2) | Kg | 116.39 | 116.39 | 100.0 | False | None | None | False | None | False | 11639.0 | 0 | | 2582322 | 80097 | None | 005 | Supplying and fixing rolling shutters of approved make, made of required
size M.S. laths, interlocked together through their entire length and
jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ( PWD SR 2023-24 Vol- 2 , P.No -77 I No - 11.6.1) | Sqm | 2711.99 | 2711.99 | 12.6 | False | None | None | False | None | False | 34171.074 | 0 | | 2582323 | 80097 | None | 006 | Providing & fixing glass panes with putty and glazing clips in steel
doors, windows, clerestory windows, all complete with : 5.5 mm thick
glass panes including cost of materials, labour, usage charges of machinery
complete as per specifications and as per directions of the Engineer-in-
Charge.( PWD SR 2023-24 Vol- 2 , P.No -85 I No - 11.30.2) | Sqm | 1295.74 | 1295.74 | 1.08 | False | None | None | False | None | False | 1399.3992 | 0 | | 2582324 | 80097 | None | 007 | Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly
brooming the surface to remove all dirt, dust, mortar drops and foreign
matter including preparing the surface even and sand paper smooth, cost
of materials, labour complete as per specifications and as per directions
of Engineer-in-charge.( PWD SR 2023-24 Vol- 2 , P.No -45 I No - 8.25) | Sqm | 141.11 | 141.11 | 94.8 | False | None | None | False | None | False | 13377.228 | 0 | | 2582325 | 80097 | None | 008 | Providing Brick work with common burnt clay Non Modular bricks
of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1
cement : 6 coarse sand) including cost of all materials, labour, scaffolding
and usage charges of machinery & other incidental charges complete as
per the direction of engineer incharge of work. (PWD SR 2023-24 Vol- 2 , P.No -13 I No - 6.2) | Cum | 8217.34 | 8217.34 | 0.324 | False | None | None | False | None | False | 2662.41816 | 0 | | 2582326 | 80097 | None | 009 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corners wherever
required smooth rendering, providing and removing scaffolding, including
cost of materials, labour, curing complete as per specifications and as per
directions of Engineer-in-charge. (PWD SR 2023-24 Vol- 2 , P.No -41 I No - 8.1.1) | Sqm | 262.65 | 262.65 | 1.8 | False | None | None | False | None | False | 472.77 | 0 | | 2582327 | 80097 | None | 010 | Providing flooring with 25mm thick polished Cuddapah slabs using cement
mortar 1:6, 25mm thick over existing cement concrete bed or top of roof
laid to line and level and jointed with cement slurry mixed with pigment
to match the shade of the slab , including cost of materials, labour, curing,
polishing complete as per specifications.( PWD SR 2023-24 Vol- 2 , P.No -64 I No - 9.36) | Sqm | 1699.5 | 1699.5 | 4.32 | False | None | None | False | None | False | 7341.84 | 0 |
| | 1707889006000 | 0 | None | None | Other Works | Development of open well and repair of wall and providing of chain link near Gandhi Ground at TMC Terdal | 335563.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2582328 | 80098 | None | 001 | Demolishing stone rubble masonry manually/ by mechanical means
including stacking of serviceable material and disposal of unserviceable
material to the appropriate disposal area as per direction of Engineerin-
charge.In cement mortar( PWD SR 2023-24 Vol- 2 , P.No -187, I No - 19.9.1) | Cum | 815.76 | 815.76 | 6.12 | False | None | None | False | None | False | 4992.4512 | 0 | | 2582329 | 80098 | None | 002 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand).( PWD SR 2023-24 Vol- 2 , P.No -09, I No -5.4) | Cum | 6580.67 | 6580.67 | 23.69 | False | None | None | False | None | False | 155896.0723 | 0 | | 2582330 | 80098 | None | 003 | Providing Flush/ Ruled pointing: Pointing on stone work with cement
mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining,
including cost of materials, labour, curing as per specifications and as
per directions of Engineer-in-charge ( PWD SR 2023-24 Vol- 2 , P.No -44 I No -8.19.1) | Sqm | 262.65 | 262.65 | 133.76 | False | None | None | False | None | False | 35132.064 | 0 | | 2582331 | 80098 | None | 004 | Providing and fixing Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer using structural steel etc. as required. In
gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works including cost of materials, labour, usage charges of machinery
complete as per specifications and as per directions of the Engineer-in-
Charge. ( PWD SR 2023-24 Vol- 2 , P.No -84 I No - 11.25.2) | Kg | 140.08 | 140.08 | 113.04 | False | None | None | False | None | False | 15834.6432 | 0 | | 2582332 | 80098 | None | 005 | Providing and fixing G.I. chain link fabric fencing of required width in mesh
size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with
2 mm dia wire or nuts, bolts and washers as required complete as per the
direction of Engineer-in-charge.( PWD SR 2023-24 Vol- 2 , P.No -96 I No - 11.60) | Sqm | 919.79 | 919.79 | 113.04 | False | None | None | False | None | False | 103973.0616 | 0 | | 2582333 | 80098 | None | 006 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( PWD SR 2023-24 Vol- 1 , P.No -16 I No - 2.5.1) | Sqm | 6828.9 | 6828.9 | 2.89 | False | None | None | False | None | False | 19735.521 | 0 |
|
|
|---|