createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1707132075788 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1740.00 emd 139000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 26-02-2024 16:00:00 tenderQueryClose 23-02-2024 16:00:00 technicalBidOpen 27-02-2024 16:02:00 publishedDate 16-02-2024 16:17:27 publishedByPost EWHFWD_EE_EEOFF_MYS publishedByUser KPE12441 - H SRINIVASAGOWDA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Azra splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9449843313 tenderSupplierList None
tenderSchedule	createdTs 1707132075809 version 4 createdDate None modifiedDate None tenderNumber EWHFWD/2023-24/BD/WORK_INDENT38 title CONSTRUCTION OF NEW VACCINE STORE AT SANTHEMARAHALLI IN CHAMARAJANAGARA DISTRICT. description CONSTRUCTION OF NEW VACCINE STORE AT SANTHEMARAHALLI IN CHAMARAJANAGARA DISTRICT. category WORKS categoryText Works ecv 6932984.28 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3523 locationName EWHFWD Executive Engineer Office Mysore provisionalAmount 7700000.0 groupOverheadTotal 0.0 fileNumber HFW/AEEMYS/VACCCINESTORE/SANTEMARAHALLI
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1707132076000 0 None None Buildings CONSTRUCTION OF NEW VACCINE STORE AT SANTHEMARAHALLI IN CHAMARAJANAGARA DISTRICT. (Civil Works) 5927526.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2444984 73680 None Item no:1.12 PWD SR 2021-22 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavatedearth or sorting & stacking the selected earth for reuse in a radiusof 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth Cum 76.7 76.7 132.0 False None None False None False 10124.4 0 2444985 73680 None Item no:1.14.1 PWD SR 2021-22 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling theexcavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 86.14 86.14 93.0 False None None False None False 8011.02 0 2444986 73680 None Item no:1.15.1 PWD SR 2021-22 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling theexcavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work.Depth exceeding 1.5 m, but not exceeding 3 m Cum 320.96 320.96 68.0 False None None False None False 21825.28 0 2444987 73680 None Item no:1.16.2 PWD SR 2021-22 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, including costof explosives, dressing of excavated surfaces, disposing off or levellingthe excavated stuff or sorting & stacking the selected stuff for reusein a radius of 50 m and lift upto 1.5 m including cost of labour, blastingmaterials, tools, usage of Machinery & all other appurtenaces requiredto complete the work-Depth exceeding 1.5 m, but not exceeding 3 m Cum 546.34 546.34 9.0 False None None False None False 4917.06 0 2444988 73680 None Item no:4.1 PWD SR 2021-22 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation,top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface ofconsolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percentconcentration, labour, usage charges of machinery, complete as perspecifications. Sqm 112.1 112.1 258.0 False None None False None False 28921.8 0 2444989 73680 None Item no:2.1.3 PWD SR 2021-22 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Footings Cum 6553.72 6553.72 48.0 False None None False None False 314578.56 0 2444990 73680 None Item no:2.2.2.1 PWD SR 2021-22 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Upto Plinth Cum 7619.64 7619.64 23.0 False None None False None False 175251.72 0 2444991 73680 None Item no:2.2.2.1 PWD SR 2021-22 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns Cum 11993.87 11993.87 2.0 False None None False None False 23987.74 0 2444992 73680 None Item no:2.2.2.1 PWD SR 2021-22 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Plinth Beams Cum 10582.83 10582.83 11.0 False None None False None False 116411.13 0 2444993 73680 None Item no:2.5.2 PWD SR 2021-22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Above Plinth Cum 12409.12 12409.12 5.0 False None None False None False 62045.6 0 2444994 73680 None Item no:2.5.2 PWD SR 2021-22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel and Roof Beam Cum 11679.17 11679.17 14.0 False None None False None False 163508.38 0 2444995 73680 None Item no:2.5.2 PWD SR 2021-22 roviding and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase Cum 10949.22 10949.22 43.0 False None None False None False 470816.46 0 2444996 73680 None Item no:11.32 PWD SR 2021-22 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kgs 108.56 108.56 10535.52 False None None False None False 1143736.0512 0 2444997 73680 None Item no:5.4 PWD SR 2021-22 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6315.36 6315.36 61.0 False None None False None False 385236.96 0 2444998 73680 None Item no:2.1.4 PWD SR 2021-22 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarseaggregates Cum 6759.04 6759.04 4.0 False None None False None False 27036.16 0 2444999 73680 None Item no:8.19.1 PWD SR 2021-22 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicelylining, including cost of materials, labour, curing as per specificationsand as per directions of Engineer-in-charge. Sqm 234.82 234.82 24.0 False None None False None False 5635.68 0 2445000 73680 None Item no 1.2 PWD SR 2018-19 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.59 488.59 64.0 False None None False None False 31269.76 0 2445001 73680 None Item no:1.9 PWD SR 2021-22 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 240.72 240.72 162.0 False None None False None False 38996.64 0 2445002 73680 None Item no:6.2 PWD SR 2021-22 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 7901.28 7901.28 62.0 False None None False None False 489879.36 0 2445003 73680 None Item no:6.14 PWD SR 2021-22 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery& other incidental charges complete as per the direction of engineer incharge of work. Sqm 1054.92 1054.92 9.0 False None None False None False 9494.28 0 2445004 73680 None Item no:12.13.1 PWD SR 2021-22 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 72691.54 72691.54 0.3 False None None False None False 21807.462 0 2445005 73680 None Item no:12.57.4 PWD SR 2021-22 Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens andinternal frame with minimum 45 mm wide wooden frame alrounddoor shutters covered with cross boned wooden sheets (core veneer)hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification.-do--do- 35 mm thick both side Teak Sqm 2752.94 2752.94 6.0 False None None False None False 16517.64 0 2445006 73680 None Item no:12.51 PWD SR 2021-22 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfastin cement concrete 1:3:6 of 20mm and down size granite metal paintingtwo coats of coal tar to sides of frame, making good the damages towalls and floor as required and disposal of the debris with leadupto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1747.58 1747.58 3.0 False None None False None False 5242.74 0 2445007 73680 None Item no:12.55.1 PWD SR 2021-22 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded PrelaminatedPVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles &5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail& bottom rail on either side & 5mm thick, 20mm wide cross PVC sheetas gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheetPrelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined togetherwith solvent cement adhesive etc., Complete as per manufacturersspecification & direction of Engineer-in-charge fixed to frames with 3nos of 75mm Aluminium hinges.-do- with both side prelam Sqm 4487.54 4487.54 2.0 False None None False None False 8975.08 0 2445008 73680 None Item no:12.54 PWD SR 2021-22 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVCfoam sheet metered cut at corners & jointed 2 No.s of 150mmlong brackets of 15x15mm M.S Square tube, the entire door frame tobe reinforced with 19x19mm M.S Square tube of 19 gauge. The doorframe to be fixed to the wall using M.S. Screws of 65/80mm size completeas per manufacturers specification & direction of Engineer-in-charge. Rmtr 560.5 560.5 5.0 False None None False None False 2802.5 0 2445009 73680 None Item no:11.5.1 PWD SR 2021-22 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at thejunctions and corners, all necessary fittings complete, includingapplying a priming coat of approved steel primer. Using M.S. angels40x40x6 mm for diagonal braces including cost of materials, labour,usage charges of machinery complete as per specifications and as perdirections of the Engineer-in-Charge. Sqm 4318.8 4318.8 9.0 False None None False None False 38869.2 0 2445010 73680 None Item no:12.85 PWD SR 2021-22 Providing & fixing of louvered ventilator made out ofmultichamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(TitaniumDioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced withGalvanized Iron profile through-out the ventilator frame. The frame havingoverall size of 39mm x 39mm with GI reinforcement of 1mm thickness.Louver clip in Aluminium (powder coated in white) will be used on theframe along with plastic parts for fixing the 4 mm pin head glass. Wallthickness of frame shall be 2mm.Maximum possible size 1000mm x1000mm.(The cost is inclusive of all fixtures and separate charges forminor T&P's shall not be made) Sqm 5746.6 5746.6 0.54 False None None False None False 3103.164 0 2445011 73680 None Item no:11.34A PWD SR 2021-22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 154.58 154.58 673.0 False None None False None False 104032.34 0 2445012 73680 None Item no:12.90 PWD SR 2021-22 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)and lead free, gaskets -grey colour having isolated drainage andreinforced with Galvanized Iron profile through-out the window frame.The outer frame having an overall size of 108mm width x 45mmheightwith reinforcement of 1mm thickness and Sash with overall size of 39mmx 75mm with GI reinforcement of 2mm and mesh sash of size 37mmx 58mm. Coextruded Glazing bead for fixing of glass shall be of size20mm x 24 mm. Windows shall be provided with 6mm plain float glass,standard hardware& Multi point locking system with touch lock. Wallthickness of frame & sash shall be of 2mm-2.5mm. Maximum possiblesize 2419mm x 2200mm. (The cost is inclusive of all fixtures andseparate charges for minor T&P's shall not be made) Sqm 8543.2 8543.2 32.0 False None None False None False 273382.4 0 2445013 73680 None Item no:11.35.2.3 PWD SR 2021-22 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conformingto IS: 733 and IS:1285, fixing with dash fasteners of required diaand size, including necessary filling up the gaps at junctions, i.e.at top, bottom and sides with required EPDM rubber/ neoprenegasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointedmechanically wherever required including cleatangle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings andthe directions of Engineer-in-charge. (Glazing, paneling and dashfasteners to be paid for separately) :For shutters of doors, windows& ventilators including providing and fixing hinges/ pivots and makingprovision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid forseparately) Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) including cost of materials,labour, usage charges of machinery complete as per specifications. Sqm 546.34 546.34 198.0 False None None False None False 108175.32 0 2445014 73680 None Item no:11.36.1 PWD SR 2021-22 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-incharge:Pre-laminated particle board with decorative lamination on oneside and balancing lamination on other side including cost of materials,labour, usage charges of machinery complete as per specifications. Sqm 945.18 945.18 11.0 False None None False None False 10396.98 0 2445015 73680 None Item no:11.37.2 PWD SR 2021-22 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paid inbasic item):With float glass panes of 5 mm thickness (weight not lessthan 12.50 kg/m²) including cost of materials, labour, usage chargesof machinery complete as per specifications. Sqm 1080.88 1080.88 10.0 False None None False None False 10808.8 0 2445016 73680 None Item no:11.38.1 PWD SR 2021-22 Providing and fixing double action hydraulic floor spring of approvedbrand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanismand door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matchingto the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as perthe direction of Engineer-in-charge: With stainless steel cover plateminimum 1.25 mm thickness including cost of materials, labour, usagecharges of machinery complete as per specifications. Nos 2462.66 2462.66 4.0 False None None False None False 9850.64 0 2445017 73680 None Item no:8.10 PWD SR 2021-22 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge. Sqm 204.14 204.14 251.0 False None None False None False 51239.14 0 2445018 73680 None Item no:8.3.2 PWD SR 2021-22 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge Sqm 325.68 325.68 168.0 False None None False None False 54714.24 0 2445019 73680 None Item no 8.51 PWD SR 2018-19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 97.94 97.94 419.0 False None None False None False 41036.86 0 2445020 73680 None Item no 8.2.2 PWD SR 2021-22 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding offcorners whereverrequired smooth rendering, providing and removingscaffolding, including cost ofmaterials, labour, curing complete as perspecifications and as per directions of Engineer-in-charge. Sqm 271.4 271.4 237.0 False None None False None False 64321.8 0 2445021 73680 None Item no 9.39 PWD SR 2021-22 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurr over existing rough plaster surface using glazed tiles ofapproved make and size including cost of materials, labour, completeas per specifications. Sqm 1223.66 1223.66 237.0 False None None False None False 290007.42 0 2445022 73680 None Item no 9.11 PWD SR 2021-22 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 899.16 899.16 3.0 False None None False None False 2697.48 0 2445023 73680 None Item no 9.17.2 PWD SR 2021-22 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade,over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the jointwith white cement & matching pigments etc. complete. Sqm 1300.36 1300.36 166.0 False None None False None False 215859.76 0 2445024 73680 None Item no 9.1 PWD SR 2021-22 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate) finished with a floating coat of neatcement, including cement slurry complete. Sqm 472.0 472.0 14.0 False None None False None False 6608.0 0 2445025 73680 None Item no 20.29 PWD SR 2021-22 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over aprepared sub base, with 43 grade cement or any othertype as per Clause 1501.2.2 M30 (Grade), coarse andfine aggregates conforming to IS:383, maximum sizeof coarse aggregate not exceeding 25 mm, mixed in aconcrete mixer of not less than 0.2 cum capacity andappropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators andfinished in continuous operation including constructionjoints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawingand technical specification clause 1501 with all lead, lifts,loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per thedirections of the Engineer-in-charge of the work. Sqm 7259.36 7259.36 15.0 False None None False None False 108890.4 0 2445026 73680 None Item no 22.8 PWD SR 2018-19 Providing groove cutting for width of 5mm to 10mm and depth 80mm- 100mm including cost of cutting machine, generator & HOM of machinery, including cost of blade,coolant etc., including cleaning of groove & providing sand and hot bitumen fillars, and filler metal etc., including cost of conveyance of all materials, labour, lead and lift charges and all other incidental charges as per drawing and as per specifications. - for concrete pavement m 139.77 139.77 43.0 False None None False None False 6010.11 0 2445027 73680 None Item no 9.40 PWD SR 2021-22 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy dutytiles for flooring, treads of steps and landing, laid on a bed of 12mmthick cement mortar 1:3 mis finished with flush pointing using whitecement, including cost of materials, mortar, including cutting, gridingthe edge to half/full round wherever required, labour, curing completeas per specification. Sqm 1336.94 1336.94 28.0 False None None False None False 37434.32 0 2445028 73680 None Item no 8.2.2 PWD SR 2021-22 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding offcorners whereverrequired smooth rendering, providing and removingscaffolding, including cost ofmaterials, labour, curing complete as perspecifications and as per directions of Engineer-in-charge. Sqm 271.4 271.4 428.0 False None None False None False 116159.2 0 2445029 73680 None Item no 8.29 PWD SR 2021-22 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat ofexterior primer applied @ 2.20kg/10 m² to give an even shade afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Sqm 245.44 245.44 402.0 False None None False None False 98666.88 0 2445030 73680 None Item no 8.39 PWD SR 2021-22 Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Sqm 112.1 112.1 419.0 False None None False None False 46969.9 0 2445031 73680 None Item no 8.55.1 PWD SR 2021-22 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound)content. With ready mixed pink or grey primer on wood work (hardand soft wood) having VOC content less than 50 grams/ litre as perspecifications and as per directions of Engineer in charge. Sqm 48.38 48.38 17.0 False None None False None False 822.46 0 2445032 73680 None Item no 8.33.2 PWD SR 2021-22 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primerapplied @0.75 ltr/10 m² of approved brand and manufacture to give aneven shade including preparing the surface after thorougly cleaningoil, grease, dirt and foreign matter, sand papering and knotting , cost ofmaterials, labour complete as per specifications and as per directionsof Engineer-in-charge. Sqm 123.9 123.9 17.0 False None None False None False 2106.3 0 2445033 73680 None Item no 8.33.3 PWD SR 2021-22 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primerapplied @ 0.80 ltr/10 m² of approved brand and manufacture includingpreparing the surface after thorougly cleaning oil, grease, dirt and foreignmatter, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Sqm 125.08 125.08 21.0 False None None False None False 2626.68 0 2445034 73680 None Item no 1.7 BWSSB 2022-23 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 110mm dia., 6 kg/sqcm & class 3 Rmtr 464.92 464.92 45.0 False None None False None False 20921.4 0 2445035 73680 None Item no 10.2 PWD SR 2018-19 KSRB 10-3 :Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc , consisting of following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kglsqm of cement admixed with proprietary water proofing compound conforming to 18:2645 over the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to 1OOmm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming 18:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slabs. (c) After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications. Sqm 1190.62 1190.62 259.0 False None None False None False 308370.58 0 2445036 73680 None Approved Rate Providing and fixing Aluminium fixtures like Aldrops of size 300 x 16 mm, Tower bolts of size 200 x 12 mm, Latches of size 250 x12 mm, 100 mm length oxidized Iron Hinges, Handles of size 150 mm, Door Stopper & Door Bush of approved make and quality including cost and conveyance of all materials and as per the direction of EIC of work with all lead and lift and as directed by the Engineer in charge of works. Single Shutter. (Locking Arrangements) Each 5125.92 5125.92 5.0 False None None False None False 25629.6 0 2445037 73680 None Item no.15.35 PWD SR 2018-19 KSRB 15.8.2 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment ) Rmtr 37.68 37.68 172.0 False None None False None False 6480.96 0 2445038 73680 None Item no.4.21 PWD SR 2018-19 KSRB 4-2.12Providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Rmtr 40.11 40.11 69.0 False None None False None False 2767.59 0 2445039 73680 None Approved Rate Providing 18mm thick 10 cms wide patty alround parapet with Cement mortar 1:6 , including cost of materials, labour, curing complete as per specifications Rmtr 35.4 35.4 77.0 False None None False None False 2725.8 0 2445040 73680 None Item no.8.80 PWD SR 2018-19 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels andfinishing the groove complete as per specifications and directionof the Engineer-in-charge: 20 mm to 25 mm wide to required depth. Rmtr 60.18 60.18 255.0 False None None False None False 15345.9 0 2445041 73680 None Item no.9.28 PWD SR 2021-22 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. Sqm 2798.96 2798.96 27.0 False None None False None False 75571.92 0 2445042 73680 None Item no.11.26.3 PWD SR 2021-22 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similarworks, including applying priming coat of approved steel primer. G.I.pipes including cost of materials, labour, usage charges of machinerycomplete as per specifications and as per directions of the Engineerin-Charge. Kgs 173.46 173.46 168.0 False None None False None False 29141.28 0 2445043 73680 None Approved Rate Providing & Fixing Board for Disply of project details using MS angles & MS sheet as per detailed drawing Each 11800.0 11800.0 1.0 False None None False None False 11800.0 0 2445044 73680 None Approved Rate Supplying and fixing name board made of Iylam brand fibre Acrelic sheet of size 120 cm x75cm x3mmtk with necessary nitches for fixing of sheet, cutting & pasting the sticker of room name in required size of letter on the existing board fixed on the Existing nitch etc., complete as per the direction of Engineer in charge of work. Each 2537.0 2537.0 2.0 False None None False None False 5074.0 0 2445045 73680 None Approved Rate Supplying and fixing name board made of Iylam brand fibre Acrelic sheet of size 10 cm x40 cm x3mmtk with necessary nitches for fixing of sheet, cutting & pasting the sticker of room name in required size of letter on the existing board fixed on the Existing nitch etc., complete as per the direction of Engineer in charge of work. Each 342.2 342.2 4.0 False None None False None False 1368.8 0 2445046 73680 None Item no:39.3 PWD SR 2018-19 Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard drapery hangers, curtain rods with end brackets, openable shutters with 19mm x 6mm thick plain teak wood beading, lipping 1.5mm thick commercial ply vertical support finished in approved 1mm lamination sheet of approved colour, shade and quality on all exposed surfaces. Inner surface painted with 2 coats of white synthetic enamel paint over 2 coats of Patti, one coat of wood primer, including cost of brass fittings, parliamentary hinges, C handles, tower bolts, magnetic catches, approved brand lock, adhesives, synthetic resins, nails, screws etc., complete including cost of all materials, labour charges, complete as per specification. Sqm 13050.97 13050.97 10.0 False None None False None False 130509.7 0 1707132076000 0 None None Buildings CONSTRUCTION OF NEW VACCINE STORE AT SANTHEMARAHALLI IN CHAMARAJANAGARA DISTRICT. (Water Supply & Sanitary Works) 159411.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2445047 73681 None item no:13.32.2 PWD SR 2021-22 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 20mm dia m 440.14 440.14 30.0 False None None False None False 13204.2 0 2445048 73681 None item no:13.33.3 PWD SR 2021-22 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (external work)25mm dia m 352.82 352.82 50.0 False None None False None False 17641.0 0 2445049 73681 None item no: 13.12 PWD SR 2021-22 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Each 509.76 509.76 2.0 False None None False None False 1019.52 0 2445050 73681 None item no: 13.4.1 PWD SR 2021-22 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25mm Each 623.04 623.04 2.0 False None None False None False 1246.08 0 2445051 73681 None I.No.14.7.8 PWD SR 2021-22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Surgeon type wash basin of size 660x460 mmwith a pair of 15 mm C.P. brass pillar taps with elbow including operatedlevers Each 3995.48 3995.48 1.0 False None None False None False 3995.48 0 2445052 73681 None item no: 13.15 PWD SR 2021-22 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 680.86 680.86 3.0 False None None False None False 2042.58 0 2445053 73681 None item no:14.40.2 PWD SR 2021-22 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Unit 448.4 448.4 1.0 False None None False None False 448.4 0 2445054 73681 None item no:14.31 PWD SR 2021-22 Providing and fixing 600x450mm bevellead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, including cost of materials, labour complete as per specifications. Unit 1145.78 1145.78 1.0 False None None False None False 1145.78 0 2445055 73681 None item no:14.3.1 PWD SR 2021-22 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making goodthe walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 5905.9 5905.9 1.0 False None None False None False 5905.9 0 2445056 73681 None item no:12.113.2 MCSR 2018-19 Providing and fixing Cl Nahani trap of approved make conforming to lSI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).-do- 12.5cms x 7.5cms Each 346.39 346.39 3.0 False None None False None False 1039.17 0 2445057 73681 None item no:12.4 BWSSB 2022-22 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak proof includingjointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not lessthan 15 cms with gravel or selected earth available from the excavationetc. complete.4 Kg/m2:110mm(weight of pipe -1.315 kg) m 352.82 352.82 35.0 False None None False None False 12348.7 0 2445058 73681 None item no:12.4 BWSSB 2022-22 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak proof includingjointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not lessthan 15 cms with gravel or selected earth available from the excavationetc. complete.4 Kg/m2:90mm(weight of pipe -0.917 kg) m 258.42 258.42 10.0 False None None False None False 2584.2 0 2445059 73681 None 2021-22 BWSSB SR , SOR Code - T130a, Item No.8 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Nos 5161.32 5161.32 2.0 False None None False None False 10322.64 0 2445060 73681 None item no:13.22.2 PWD SR 2021-22 Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid Nos 250.16 250.16 2.0 False None None False None False 500.32 0 2445061 73681 None P.No.94 I.No.13.78 KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 Nos 10290.79 10290.79 1.0 False None None False None False 10290.79 0 2445062 73681 None I.No.13.5.1 PWD SR 2021-22 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore Nos 388.22 388.22 1.0 False None None False None False 388.22 0 2445063 73681 None I.No.14.5.1 PWD SR 2021-22 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushingcistern, with fittings, standard size C.P. brass flush pipe, spreaderswith unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls andfloors wherever required-Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Unit 7821.04 7821.04 1.0 False None None False None False 7821.04 0 2445064 73681 None Approved Rate Providing & fixing 1 HP Mono block pump of approved make with all accessories etc.., complete including cost of materials, labour as per specifications.& as per the direction of the Engineer - in - charge Each 11800.0 11800.0 1.0 False None None False None False 11800.0 0 2445065 73681 None Approved Rate Providing and fixing Clamps to hold the pipe Each 413.0 413.0 55.0 False None None False None False 22715.0 0 2445066 73681 None Item no:13.1 BWSSB 2022-23 Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape attop, with CC 1:3:6 foundation using 40mm and down size graded metalof approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricksof approved quality, plaster inside and out side with CM 1:3, 12mm thick,except for the conical surface outside where the plaster thickness shall be20mm. Slope inside to be 1:6 in the concrete towards central drain andfinished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mmand down size. Supplying and fixing SFRC Machinehole frame andcover (Heavy Duty) conforming to IS:12592 with latest amendment, inCC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars(Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footstepsshall be fixed 30cms apart and on CC block embeded to masonry wall.The whole works include watering, curing, barricading, danger lighting,pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering,engraving Machinehole number with flow direction on the innerconical surface etc. as per the drawing etc. as per technical specificationsand for the following diameters and depth etc. for 1.2mm diaCirc. BM.H:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. ,1.0 M depth & SFRC cover & frame Nos 32952.68 32952.68 1.0 False None None False None False 32952.68 0 1707132076000 0 None None Buildings CONSTRUCTION OF NEW VACCINE STORE AT SANTHEMARAHALLI IN CHAMARAJANAGARA DISTRICT. (Electrical Works) 327573.62 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2445067 73682 None 2.2.1 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(5/2.3) Using class A Materials Short point up to 3Mtr from tapping point to out let via switch Point 296.18 296.18 15.0 False None None False None False 4442.7 0 2445068 73682 None 2.2.2 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(5/2.3) Using class A Materials Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Point 425.98 425.98 10.0 False None None False None False 4259.8 0 2445069 73682 None 2.2.3 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(5/2.3) Using class A Materials Above 6Mtr up to 10Mtr from tapping Point to out let via switch Point 639.56 639.56 5.0 False None None False None False 3197.8 0 2445070 73682 None 2.2.4 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5 Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block. complete for each outlet.(5/2.3) Using class A Materials Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches Point 791.78 791.78 12.0 False None None False None False 9501.36 0 2445071 73682 None 3.4.1 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (15/3.5) 1-3Way Each 145.14 145.14 5.0 False None None False None False 725.7 0 2445072 73682 None 3.4.2 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (15/3.5) 4-5Way Each 162.84 162.84 2.0 False None None False None False 325.68 0 2445073 73682 None 3.4.3 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (15/3.5) 6Way Each 250.16 250.16 2.0 False None None False None False 500.32 0 2445074 73682 None 3.4.4 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (15/3.5) 8Way Each 295.0 295.0 3.0 False None None False None False 885.0 0 2445075 73682 None 3.4.5 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (15/3.5) 10-12Way Each 383.5 383.5 1.0 False None None False None False 383.5 0 2445076 73682 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(15/16/3.6) 1 to 3 Module Each 179.36 179.36 5.0 False None None False None False 896.8 0 2445077 73682 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(15/16/3.6) 4Moudule Each 206.5 206.5 2.0 False None None False None False 413.0 0 2445078 73682 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(15/16/3.6) 6Moudule Each 287.92 287.92 2.0 False None None False None False 575.84 0 2445079 73682 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(15/16/3.6) 8Moudule Each 356.36 356.36 3.0 False None None False None False 1069.08 0 2445080 73682 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.(15/16/3.6) 10Moudule Each 428.34 428.34 1.0 False None None False None False 428.34 0 2445081 73682 None 3.6.1 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials 6Amps one way. Each 103.84 103.84 15.0 False None None False None False 1557.6 0 2445082 73682 None 3.6.2 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials 6Amps Two way. Each 179.36 179.36 6.0 False None None False None False 1076.16 0 2445083 73682 None 3.6.3 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials 6Amps 3way socket. Each 191.16 191.16 5.0 False None None False None False 955.8 0 2445084 73682 None 3.6.4 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials Stepped Fan Regulator. Each 369.34 369.34 5.0 False None None False None False 1846.7 0 2445085 73682 None 3.6.8 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials 16Amps one way switch Each 293.82 293.82 15.0 False None None False None False 4407.3 0 2445086 73682 None 3.6.11 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials 6/16Amps universal socket Each 293.82 293.82 10.0 False None None False None False 2938.2 0 2445087 73682 None 3.6.10 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Using Group "A" materials 32Amps DP switch Each 442.5 442.5 5.0 False None None False None False 2212.5 0 2445088 73682 None I-1.12 Supplyin and Fixing Metal Fan Box with Round Hook.(3/1.12) No 192.34 192.34 5.0 False None None False None False 961.7 0 2445089 73682 None 1.1.1 Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(2/1.1) 19/20mm dia 2mm thick m 80.24 80.24 55.0 False None None False None False 4413.2 0 2445090 73682 None 1.1.2 Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(2/1.1) 25mm dia 2mm thick m 94.4 94.4 35.0 False None None False None False 3304.0 0 2445091 73682 None 1.2.1 Concealed Conduit System Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/1.2) 19/20mm dia 2mm thick m 71.98 71.98 85.0 False None None False None False 6118.3 0 2445092 73682 None 1.2.2 Concealed Conduit System Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/1.2) 25mm dia 2mm thick m 82.6 82.6 20.0 False None None False None False 1652.0 0 2445093 73682 None 1.3.1 Groove Cutting in Wall Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.( P-2,/1.3) 19/20mm dia 2mm thick m 88.5 88.5 145.0 False None None False None False 12832.5 0 2445094 73682 None 1.3.2 Groove Cutting in Wall Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.( P-2,/1.3) 25mm dia 2mm thick m 94.4 94.4 115.0 False None None False None False 10856.0 0 2445095 73682 None 2.3.2 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. (6/2.5) GTP of GROUP-a 1.5 sqmm m 30.68 30.68 100.0 False None None False None False 3068.0 0 2445096 73682 None 2.3.3 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. (6/2.5) GTP of GROUP-a 2.5 sqmm m 47.2 47.2 200.0 False None None False None False 9440.0 0 2445097 73682 None 2.3.4 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. (6/2.5) GTP of GROUP-a 4 sqmm m 69.62 69.62 220.0 False None None False None False 15316.4 0 2445098 73682 None 2.3.5 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified IS-694:1990 & confirming to the attached. (6/2.5) GTP of GROUP-a 6 sqmm m 102.66 102.66 45.0 False None None False None False 4619.7 0 2445099 73682 None 5.18.11 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure (47/6.17) Double Door 4 Way TP & N Each 3602.54 3602.54 2.0 False None None False None False 7205.08 0 2445100 73682 None 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 5-32Amps SP Each 617.14 617.14 5.0 False None None False None False 3085.7 0 2445101 73682 None 5.17.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 50-63Amps TPN Each 2830.82 2830.82 2.0 False None None False None False 5661.64 0 2445102 73682 None 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board (47/6.18) 16-25 Amps 2 pole Each 2992.48 2992.48 2.0 False None None False None False 5984.96 0 2445103 73682 None I-32.07 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) Km 214113.36 214113.36 0.1 False None None False None False 21411.336 0 2445104 73682 None 19.6.2 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.(55/7.2) No 4897.0 4897.0 2.0 False None None False None False 9794.0 0 2445105 73682 None 11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burninghours & 70% lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 20/22 W Each 873.2 873.2 15.0 False None None False None False 13098.0 0 2445106 73682 None 11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100V to 270V50/60Hzapplication. Compliance to IS 10322/IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimaltools. LED Light fixture with ........W System Powerconsumption.LEDEfficiency greater than 1301m/w,nominal CRI greater than 75.Luminaire manufacturer should have in-house facilityaccredited by NABL/CPRI & anyGovernment certifiedagency & Design&Development facility certified by ISO9001:2008. Housing with supplier word mark /name shallbe Engraved / Embossing on the die cast housing/ Bodypart. Warranty of 2 Years against any manufacturing defectworking under standard electrical conditions as mentionedLED Streetlight 70W Each 7026.9 7026.9 4.0 False None None False None False 28107.6 0 2445107 73682 None 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm) Each 3536.46 3536.46 2.0 False None None False None False 7072.92 0 2445108 73682 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. (78/9.3) 48" Sweep (1200mm) Regular moduel Each 2460.3 2460.3 5.0 False None None False None False 12301.5 0 2445109 73682 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.(108/17.7) On wall / ceiling / Rafter / Girders Each 140.42 140.42 15.0 False None None False None False 2106.3 0 2445110 73682 None I-13.11 Fixing a ceiling /Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps.ceiling rose,necessary length of 2310.0076 inch PVC insulated twin twisted copper wire and wiring (109/17.8) Each 331.58 331.58 5.0 False None None False None False 1657.9 0 2445111 73682 None I-13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 I 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame (109/17.11) Each 828.36 828.36 2.0 False None None False None False 1656.72 0 2445112 73682 None 5.42.2 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete (49/6.40) 16SWG Sq CM 0.45 0.45 10000.0 False None None False None False 4500.0 0 2445113 73682 None 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. (49/6.39) 100Amps 4x30x6mm Aluminum Strips m 2612.52 2612.52 1.0 False None None False None False 2612.52 0 2445114 73682 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint (49/6.39) 40x40x6mm m 324.5 324.5 2.0 False None None False None False 649.0 0 2445115 73682 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint (49/6.39) 50x100x50x6mm C channel m 802.4 802.4 2.0 False None None False None False 1604.8 0 2445116 73682 None 5.14.7 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (leu= lcs) (46/6.13) FOUR POLE 100Amps 25kA Each 9752.7 9752.7 1.0 False None None False None False 9752.7 0 2445117 73682 None 5.17.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (47/6.16) 40-63Amps TPN Each 2830.82 2830.82 2.0 False None None False None False 5661.64 0 2445118 73682 None 5.11.2 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (45/6.11) 100Amps Each 8496.0 8496.0 2.0 False None None False None False 16992.0 0 2445119 73682 None I-5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy (48/6.31) Each 9876.6 9876.6 1.0 False None None False None False 9876.6 0 2445120 73682 None I-5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board (47/6.19) Each 9812.88 9812.88 1.0 False None None False None False 9812.88 0 2445121 73682 None I-5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C (48/6.36) Each 547.52 547.52 2.0 False None None False None False 1095.04 0 2445122 73682 None I-5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) Each 595.9 595.9 2.0 False None None False None False 1191.8 0 2445123 73682 None Approved Rate Providing & fixing approved quality aquaguard water purifier, etc complete as per specification Each 29500.0 29500.0 1.0 False None None False None False 29500.0 0 1707132076000 0 None None Buildings CONSTRUCTION OF NEW VACCINE STORE AT SANTHEMARAHALLI IN CHAMARAJANAGARA DISTRICT. (D.G Set) 518472.18 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2445124 73683 None 10.1.1 Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set pecifications.Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder,conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner,Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for highwater temperature, Permissible overload of 10% for one hourin 12 hours of operation-15 kVA/12kW Set 416030.24 416030.24 1.0 False None None False None False 416030.24 0 2445125 73683 None I-32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) m 216461.56 216461.56 0.1 False None None False None False 21646.156 0 2445126 73683 None 6.6.1 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)(70/6) In soil (ordinary) m 120.36 120.36 80.0 False None None False None False 9628.8 0 2445127 73683 None 13.2.3 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole,using suitable clA, bolts, nuts and wiring using suitable capacity wires. Using 40mm dia G.I.Pipe m 1544.62 1544.62 6.0 False None None False None False 9267.72 0 2445128 73683 None 6.11.2 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)(70/11) 25mm dia Each 99.12 99.12 2.0 False None None False None False 198.24 0 2445129 73683 None I-6.8 Providing and laying in position 100mm dia stone ware pipe in exisitng trench.(70/8) m 253.7 253.7 100.0 False None None False None False 25370.0 0 2445130 73683 None I-6.2 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. No 4897.0 4897.0 2.0 False None None False None False 9794.0 0 2445131 73683 None I-15.2 Providing 2kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM, Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 2 meters, applicable on Class A,8, C and electrically started Fire, A Rating 1A, 8 Rating 88, Can construction : Deep drawn & Co. , Mig welded, valve Construciton:Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5years Warranty with instalert system with Superior quality EPDM Rubber Hosepipeetc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete. IS 15683, CE Approved 2 Kgs Each 4067.46 4067.46 2.0 False None None False None False 8134.92 0 2445132 73683 None 5.11.1 Supplying of on load change over switches 4 poles, 415V, 50Hz, AC Supply with AC-23A Duty.(33/7) Up to 63AmpsGroup A Each 6118.3 6118.3 1.0 False None None False None False 6118.3 0 2445133 73683 None 13.18.2 Fixing of ..... Amps TPST / change over switch/ Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling.(30/16) 100A to 250A TPDT/ COS Each 483.8 483.8 1.0 False None None False None False 483.8 0 2445134 73683 None Approved Rate Fee and charges to be paid to electrical inspectorate and pollution control board etc., Job 11800.0 11800.0 1.0 False None None False None False 11800.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1707132077000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1707132077000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1707132077000 1 None None ELIGIBILITY Conditional tenders will not be accepted None 1707132118000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1707132142000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1707132155000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1707132164000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1707132175000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1707132189000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (section 2 & 3 of the bid document) and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1707132207000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1707132217000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution None 1707132233000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoide damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None 1707132251000 0 None None ELIGIBILITY The Defects Liability Period is 1 (One) year from the date of completion of the Project including maintainance None 1707132265000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within a 2days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive None 1707132278000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST. None 1707132288000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., (2018-19 to 2022-23) None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None 3.2(b)To qualify for award of this contract, each Tenderer in his name should have in the last five years (2018-19 to 2022-23)b) The Contractor should have Satisfactorily completed at least one Similar nature of work value of Rs.34.66 lakhs as a prime contractor Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None 3.2(c)Executed in any one year the following minimum quantities of work (Earthwork excavation -283.2 cum,Pcc&Rcc-120.00 cum,Steel-8428.40 kgs,BBM,SSM-98.40 cum,Fooring-346.40sqm, Plastering-867.20 sqm,wpc-207.20sqm, painting-687.20sqm,M.S.Grill-538.40 kgs. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None 3.2(d)The Tenderer or his identified sub contractor should possess required valid electrical license issued by competent authority for executing building electrification works and should have executed similar electrical works totaling Rs 1.39 Lakhs in any one years Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None 3.2(e)The Tenderer or his identified sub contractor should possess valid license issued by competent authority for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs. 0.67 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None TList of Minimum Key Personnel to be deployed by the contractor at site for Contract work. 1 Site Engineer B.E. Civil with minimum experience of 5 years in the Construction of buildings-No. 1(one) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years (2018-19 to 2022-23)a)achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering construction works only) value of Rs 69.32 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None 3.3(c) Liquid assets and /or availability of credit facilities of not less than Rs 20.80 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Class III & Above KPWD Civil Contractor Others others createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid KPWD Registration Certificate True Technical Bid GST Certificate True Technical Bid Work done Certificate to issued not below the rank of Executive Engineerbe True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None