createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1708089007765 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 547500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 26-02-2024 17:00:00 tenderQueryClose 21-02-2024 17:00:00 technicalBidOpen 28-02-2024 11:00:00 publishedDate 16-02-2024 19:40:21 publishedByPost KKRTC_EE_HOFF_KLB publishedByUser KPE11172 - CHANNAN BORAIAH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 23-02-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Channana Boraiah splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8472220663 mobileNumber 7760992033 tenderSupplierList None
tenderSchedule	createdTs 1708089007789 version 6 createdDate None modifiedDate None tenderNumber KKRTC/2023-24/BD/WORK_INDENT20 title Construction of New Ultra Modern Bus Station at Mahagaon Dist Kalaburagi. description Construction of New Ultra Modern Bus Station at Mahagaon Dist Kalaburagi. category WORKS categoryText Works ecv 30138213.07 deptName Kalyana Karnataka Road Transport Corporation status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 5935 locationName Kalyana Karnataka Road Transport Corporation Head Office Kalburgi provisionalAmount 36500000.0 groupOverheadTotal 0.0 fileNumber KKRTC/EEG/KLB/DB/T/927/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1708089008000 0 None None Buildings Construction of New Ultra Modern Bus Station at Mahagaon Dist Kalaburagi. 30138213.07 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2659057 82774 None code01 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as perdrawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.SRP- Vol-I (8/1.14.1) Depth exceeding 1.5 m, but not exceeding 3 m.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 1167.08 False None None False None False 124994.268 0 2659058 82774 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.SRP- Vol-I (8/1.15.1) 1 In ordinary/soft rock without blasting upto 1.5 m depth Cum 381.15 381.15 219.1 False None None False None False 83509.965 0 2659059 82774 None code03 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. SRP- Vol-I (7/1.8) Cum 497.7 497.7 1237.5 False None None False None False 615903.75 0 2659060 82774 None code04 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. SRP- Vol-III (24/4.27) Cum 2686.95 2686.95 165.0 False None None False None False 443346.75 0 2659061 82774 None code05 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS. 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 15.1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing.SRP- Vol-III (43/6.1)complete in C.C. 1.6.12 prop ) Cum 5166.0 5166.0 206.25 False None None False None False 1065487.5 0 2659062 82774 None code06 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances requiredcomplete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately).SRP- Vol-I (15/2.1.2) Mix 1.4.8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 175.15 False None None False None False 1041652.08 0 2659063 82774 None code07 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.SRP- Vol-I (7/1.9) Cum 279.3 279.3 529.89 False None None False None False 147998.277 0 2659064 82774 None code08 KSRB 2.3 . Filling (new earth )Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m .Including cost of all labour complete as per specifications.SRP- Vol-I (7/1.11) Cum 441.0 441.0 785.49 False None None False None False 346401.09 0 2659065 82774 None code09 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (17/2.4.1) Mix 1.2.4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 6724.2 6724.2 9.35 False None None False None False 62871.27 0 2659066 82774 None code10 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (15/2.2.3) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/1 (Foundation upto plinth (a) Isolated) Cum 7185.02 7185.02 134.66 False None None False None False 967534.7932 0 2659067 82774 None code11 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).SRP- Vol-I (15/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/1 (Foundation upto plinth (a) Isolated) Cum 7129.46 7129.46 44.9 False None None False None False 320112.754 0 2659068 82774 None code12 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/8 (Column & Piers as per corrigendum-3) Cum 12214.76 12214.76 71.35 False None None False None False 871523.126 0 2659069 82774 None code13 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/8 (Column & Piers as per 3rd Corrigendum-3) Cum 11834.55 11834.55 11.21 False None None False None False 132665.3055 0 2659070 82774 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/8 (Plinth beams of Building as per corrigendum-3) Cum 10777.73 10777.73 31.07 False None None False None False 334864.0711 0 2659071 82774 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 115/12 (Beam and Lintel of Building as per corrigendum-3) Cum 11496.24 11496.24 65.85 False None None False None False 757027.404 0 2659072 82774 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 33.88 False None None False None False 377368.992 0 2659073 82774 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 116/13 (Roof (Straight & Arched as per corrigendum 3) Cum 10777.73 10777.73 198.94 False None None False None False 2144121.6062 0 2659074 82774 None code18 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 116/13 (Roof (Straight & Arched as per 3rd Corrigendum) Cum 10442.25 10442.25 5.4 False None None False None False 56388.15 0 2659075 82774 None code19 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).SRP- Vol-I (17/2.5.2) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP 116/20 (Chejjas,canopy & other Arch Projection of minor section) Cum 10418.47 10418.47 0.69 False None None False None False 7188.7443 0 2659076 82774 None code20 Construction of M40 grade un-reinforced,Cement Concrete Pavement with OPC/PPC/PSC dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383.2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing SRP- Vol-III (43/6.2) Cum 9514.05 9514.05 330.0 False None None False None False 3139636.5 0 2659077 82774 None code21 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot ressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification.SRP- Vol-II (106/12.57.4) 35 mm thick Both side teak Sqm 4758.6 4758.6 17.01 False None None False None False 80943.786 0 2659078 82774 None code22 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.SRP- Vol-II (100/12.12) Cum 130412.1 130412.1 0.47 False None None False None False 61293.687 0 2659079 82774 None code23 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SRP- Vol-II (105/12.54) Rmtr 333.9 333.9 45.6 False None None False None False 15225.84 0 2659080 82774 None code24 VOL II SRP 106/12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges (both side prelam) Sqm 2484.3 2484.3 12.6 False None None False None False 31302.18 0 2659081 82774 None code25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.SRP- Vol-II (85/11.34A) Kg 176.4 176.4 1454.04 False None None False None False 256492.656 0 2659082 82774 None code26 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1.6 (1 cement . 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.SRP- Vol-II (14/6.8) Cum 8367.45 8367.45 160.15 False None None False None False 1340047.1175 0 2659083 82774 None code27 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix .1.4 (1 cement. 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.2.1) Sqm 309.75 309.75 1356.5 False None None False None False 420175.875 0 2659084 82774 None code28 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix .1.6 (1 cement. 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.2.2) Sqm 292.95 292.95 576.0 False None None False None False 168739.2 0 2659085 82774 None code29 Providing 12 mm cement plaster with cement mortar 1.4 (1 cement.4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (41/8.1.1) Sqm 267.75 267.75 332.96 False None None False None False 89150.04 0 2659086 82774 None code30 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS. 733 and IS.1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .For Fixed Portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.SRP-Vol-II (11.35.1.2/86) Kg 513.45 513.45 90.58 False None None False None False 46508.301 0 2659087 82774 None code31 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item).With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.SRP-Vol-II (11.37.2/82) Sqm 1229.55 1229.55 15.86 False None None False None False 19500.663 0 2659088 82774 None code32 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (83/11.28) Kg 593.25 593.25 35.64 False None None False None False 21143.43 0 2659089 82774 None code33 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1.6, 20 mm thick, and joints finished with cement mortar 1.3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. SRP- Vol-II (64/9.30) Sqm 5594.4 5594.4 250.73 False None None False None False 1402683.912 0 2659090 82774 None code34 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percentage and conforming to IS.15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming (Payment for grouting of joints to be made separately). SRP- Vol-II (62/9.22.2)Size of Tile 600x600 mm Sqm 1392.3 1392.3 109.73 False None None False None False 152777.079 0 2659091 82774 None code35 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1.6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab,including cost of materials,labour,curing, polishing complete as per specifications.SRP- Vol-II (64/9.34) Sqm 1622.25 1622.25 108.57 False None None False None False 176127.6825 0 2659092 82774 None code36 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge. SRP- Vol-II (69/10.2) Rmtr 344.4 344.4 100.0 False None None False None False 34440.0 0 2659093 82774 None code37 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SRP- Vol-I (18/2.11/a) Kg 93.92 93.92 58528.89 False None None False None False 5497033.3488 0 2659094 82774 None code38 Supplying, fitting and placing un-coated Mild steel reinforcement complete in foundation as per drawing and technical specification. SRP- Vol-I (18/2.12) Kg 77.4 77.4 12375.0 False None None False None False 957825.0 0 2659095 82774 None code39 Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (75/11.1) Kg 111.3 111.3 5943.13 False None None False None False 661470.369 0 2659096 82774 None code40 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 percentage) total coated thickness with zinc coating 120 grams per m2 as per IS. 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. SRP- Vol-II (26/7.38) Sqm 596.4 596.4 338.91 False None None False None False 202125.924 0 2659097 82774 None code41 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories,sealing shall be done with necessary rods etc., complete SRP- Vol-II (71/10.15.1) Sqm 4188.45 4188.45 29.82 False None None False None False 124899.579 0 2659098 82774 None code42 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ eams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval fromstructural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts,washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glasspanel inside the SS channel shall be measured.SRP- Vol-II (160/18.7) Sqm 8349.6 8349.6 12.78 False None None False None False 106707.888 0 2659099 82774 None code43 KSRB 7.15 .Providing , fabricating, assembling and fixing in position anodized aluminum partions using aluminium section of mat finish or glassy finish in combination of plain grove, single groove, single grove and double grove as per requirements for the frames of overall size 63.5mmx38.1mm. with thickness of 2 mm having section weight, plain sections. 1.054 kg/m, single grove thickness 1.95mm section weight. 1.094kg/m and bottom member 114.3mm x 44.45mm thickness 3.18mm weight 2.646 kg/m aluminium louvers section of size 36.5mmx34.93mm 1.45mm thick section weight 0.429kg/m bottom prortion provided with 12mm thick prelaminated sheet both sides of approved portion viz., 0.9m to 2.13m and top panel with louvers sections; the glass and panels fitted wtih glazing clips of 19mm x 17.3mm of thickness 0.9mm weight 0.13 and top panel with louvers sections; the glass and panels fitted with glazing clips of 19mmx 17.3mm of thickness 0.9mm weight 0.124kg/m aluminium setions anodised 12 to 15 microns, sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials for non adherence of mortars or any other sticky materials ; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar, with necesary opening for fixing of door of standard size ( excluding cost of door ) all the frame throughly cleaned, free from rust , scale of dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specification SRP 38/7.15.2 ( Powder Coated ) Sqm 3432.0 3432.0 4.86 False None None False None False 16679.52 0 2659100 82774 None code44 Constructing brick maconary inspection chamber of internal dimention 600 X 450 mm, and depth of 600mm ( Inner dimension ) with modular bricks of class designation 75 in Cm 1.6 bed concrete 150mm thick with 1.3.6 with plastering 12 mm thick with CM 1.4.CC 1.2.4 cooping 75mm thick for fixing CI cover & frame etc.(excluding cost of CI frame & cover). SRP- Vol-V 16.9/191 Each 5030.55 5030.55 3.0 False None None False None False 15091.65 0 2659101 82774 None code45 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will makehis own arrangements for procuring water for testing) etc.Note. Upto 110mm dia Coil shall be used. SRP- Vol-V 94/9.1.4 Rmtr 492.45 492.45 290.0 False None None False None False 142810.5 0 2659102 82774 None code46 Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for. PVC pipes 110mm dia., 6 kg/sqcm & class 3 SRP- Vol-V 113/10.1.7) Rmtr 431.55 431.55 100.0 False None None False None False 43155.0 0 2659103 82774 None code47 Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651.1992,IS 4127 with latest amendments, including conveying to work site,caulking with hemp dipped in tar and jointing with CM 1.1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing.150 mm dia. pipes SRP- Vol-V 187/16.1.2 Rmtr 610.05 610.05 70.0 False None None False None False 42703.5 0 2659104 82774 None code48 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.SRP- Vol-II (50/8.51) Sqm 105.0 105.0 1260.98 False None None False None False 132402.9 0 2659105 82774 None code49 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade .New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-II (45/8.25) Sqm 143.85 143.85 1260.98 False None None False None False 181391.973 0 2659106 82774 None code50 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC.Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400Percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 857.85 857.85 100.0 False None None False None False 85785.0 0 2659107 82774 None code51 Finishing walls with water proofing cement paint of required shade .New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. (Apex Paint) SRP- Vol-II (45/8.28) Sqm 93.45 93.45 908.96 False None None False None False 84942.312 0 2659108 82774 None code52 Providing and placing on terrace ( at all floor levels ) polyethylene water storage tanks,IS . 12701 marked,with cover and suitable locking arrangement and making necessary holes for for inlet,oulet and overflow pipes but without fittings and the base support for tank. SRP- Vol-II (12/13.34) Ltr 9.45 9.45 4000.0 False None None False None False 37800.0 0 2659109 82774 None code53 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply incl all CPVC plain & brass threaded fittings. This incl jointing of pipes and fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete 50mm dia as pe direction of Engineer in charge External work SRP- Vol-II (11/13.33.6) 40 mm Mtr 500.85 500.85 100.0 False None None False None False 50085.0 0 2659110 82774 None code54 25 mm Mtr 310.8 310.8 90.0 False None None False None False 27972.0 0 2659111 82774 None code55 20 mm Mtr 227.85 227.85 10.0 False None None False None False 2278.5 0 2659112 82774 None code56 15 mm Mtr 174.3 174.3 25.0 False None None False None False 4357.5 0 2659113 82774 None code57 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap SRP- Vol-II (133/14.7.7) Nos 2655.45 2655.45 3.0 False None None False None False 7966.35 0 2659114 82774 None code58 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. SRP- Vol-II (126/14.13.2) Nos 2447.55 2447.55 6.0 False None None False None False 14685.3 0 2659115 82774 None code59 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked black solid plastic seat and lid. SRP- Vol-II (123/14.3.2) Nos 6095.25 6095.25 2.0 False None None False None False 12190.5 0 2659116 82774 None code60 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS . 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required .VOL II 124/14.5.1 Each 9074.1 9074.1 6.0 False None None False None False 54444.6 0 2659117 82774 None code61 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing . SRP- Vol-II (128/14.32.3) Unit 1119.3 1119.3 2.0 False None None False None False 2238.6 0 2659118 82774 None code62 Providing and fixing C I Nahani trap of approved make confirming to ISI specifications and construction of cistern in CC 1.2.4 as per directions (Inclusive of cost of materials and fixtures) 12.5 cms x 7.5 cms SRP 90 / 12.113.2 Each 285.0 285.0 2.0 False None None False None False 570.0 0 2659119 82774 None code63 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore SRP- Vol-II (117/13.5.1) Nos 310.8 310.8 5.0 False None None False None False 1554.0 0 2659120 82774 None code64 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm nominal bore SRP- Vol-II (117/13.4.3) Nos 737.1 737.1 2.0 False None None False None False 1474.2 0 2659121 82774 None code65 Providing and fixing brass stop cock of approved quality 15 mm nominal bore SRP- Vol-II (115/13.3.1) Nos 342.3 342.3 8.0 False None None False None False 2738.4 0 2659122 82774 None code66 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation com plete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS. 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (76/11.6.3) Sqm 2388.75 2388.75 100.25 False None None False None False 239472.1875 0 2659123 82774 None code67 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS . 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1.4 (1 Cement . 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. SRP- Vol-II (60/9.11) Sqm 933.45 933.45 8.66 False None None False None False 8083.677 0 2659124 82774 None code68 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1.3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SRP- Vol-II (65/9.38) Sqm 1461.6 1461.6 75.12 False None None False None False 109795.392 0 2659125 82774 None code69 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1.3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification.SRP- Vol-II (65/9.40) Sqm 978.6 978.6 59.91 False None None False None False 58627.926 0 2659126 82774 None code70 Supplying and fixing MS Chairs & 3 seater of approved qulaity including fixing in flooring drilling to the suitable holes grouting complete as per direction of Engineer in charge of work complete as per specifications with all lead and lift. (Approved rate) Nos 5500.0 5500.0 40.0 False None None False None False 220000.0 0 2659127 82774 None code71 Hydraulic Excavator of 0.9 m3 bucket (J.C.B excavator) Levelling the ground SRP- Vol-I (A-45/50) Hour 1417.5 1417.5 12.0 False None None False None False 17010.0 0 2659128 82774 None code72 Korean truff (Bijapur BS Approved Rate) Sqm 175.0 175.0 50.0 False None None False None False 8750.0 0 2659129 82774 None code73 Providing & supplying of plants from forest department of plants size 14inch x 20inch with supporting guard stick including transportation loading unloading placeing the plants in pits of 1 Mtr x 1 Mtr x 1 Mtr of size pits and refiling of required quantity and watering etc., complete. Each 100.0 100.0 50.0 False None None False None False 5000.0 0 2659130 82774 None code74 Providing patti allround compound wall etc, with CM 1.3 and finished as per design and specification including scafolding etc, complete. Patti 10cm wide and 10 mm thick. Rmtr 11.88 11.88 421.2 False None None False None False 5003.856 0 2659131 82774 None code75 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing ofcasing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for SRP- Vol-V 139/12.2 Borewell depth of 0 to 50 m Rmtr 324.45 324.45 60.0 False None None False None False 19467.0 0 2659132 82774 None code76 Borewell depth of 50 to 100 m Rmtr 406.35 406.35 30.0 False None None False None False 12190.5 0 2659133 82774 None code77 Borewell depth of 100 to 150 m Rmtr 432.6 432.6 60.0 False None None False None False 25956.0 0 2659134 82774 None code78 Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for. PVC pipes 160mm dia., 6 kg/sqcm & class 3 SRP- Vol-V 134/1.9) Rmtr 628.95 628.95 20.0 False None None False None False 12579.0 0 2659135 82774 None code79 Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for. PVC pipes 140mm dia., 6 kg/sqcm & class 3 SRP- Vol-V 113/10.1.8) Rmtr 613.2 613.2 40.0 False None None False None False 24528.0 0 2659136 82774 None code80 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE. 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15percentage, b) Above 30 M - 30percentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. 5 O050A Cleaning of borewells including yield.VOL-V 139/12.2 Each 5288.0 5288.0 1.0 False None None False None False 5288.0 0 2659137 82774 None code81 Stone Work ( Machine cut edges ) for wall lining etc,( Veneer work) upto 10 mtr height backing filled with a grout of average 12mm thick cement motar 1.3 ( 1 cement . 3 coarse sand) including pointing in white cement mortar 1.2 ( 1 white cement . 2 stone dust) with an admixture of pigment matching the stone shade ( to be secured to the backing and the sides by means of cramps and pins which shall be paid for seperately) white sand stone exposed face fine dressed with rough 30mm thick ( SRP 121/7.23.3.5 )(CSR) ( approved in Developmental works in Sedam Bus Station ) Sqm 2962.05 2962.05 35.0 False None None False None False 103671.75 0 2659138 82774 None code82 Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per IS. 2062, placed symmetrical to centre line of the JOint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, including cost of materials, labour, HOM complete as per specifications, all as specified in clause 2600.4 MORTH Specification No. 2604 SRP 31.1( 18-19 SR) Mtr 1253.7 1253.7 120.0 False None None False None False 150444.0 0 2659139 82774 None code83 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix .1.4 (1 cement. 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..SRP- Vol-II(41/8.4.2)) Sqm 327.6 327.6 170.0 False None None False None False 55692.0 0 2659140 82774 None code84 Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1.3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications..SRP- Vol-II(67/9.37) Sqm 825.3 825.3 110.0 False None None False None False 90783.0 0 2659141 82774 None code85 Storage Unit- Wooden -One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt complete as per specifications, drawings and as directed by Engineer in charge.PLY STORAGE - 900 mm W X 430 mm D X 2100 mm Ht SRP( SR 18-19) (39.24.3) Sqm 20790.0 20790.0 2.0 False None None False None False 41580.0 0 2659142 82774 None code86 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required .SRP- Vol-I (134/14.11.2) Size 600x450x200 mm Nos 5336.1 5336.1 2.0 False None None False None False 10672.2 0 2659143 82774 None Elecl code87 SRP 1.2 Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe 25 mm dia 2 .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick 1.2.2 Rmtr 81.9 81.9 800.0 False None None False None False 65520.0 0 2659144 82774 None Elecl code88 SRP. 1.3.2 -Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick Rmtr 82.95 82.95 500.0 False None None False None False 41475.0 0 2659145 82774 None Elecl code89 1.1.2 Open Conduit System.Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structureor rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25mm dia 2mm thick Rmtr 85.05 85.05 90.0 False None None False None False 7654.5 0 2659146 82774 None Elecl code90 SRP 2.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694.confirming to latest amendments. 1.5 sqmm 2.3.2 Rmtr 27.3 27.3 1700.0 False None None False None False 46410.0 0 2659147 82774 None Elecl code91 Do- 2.5 sqmm (P6/2.3.3) Rmtr 44.1 44.1 1500.0 False None None False None False 66150.0 0 2659148 82774 None Elecl code92 Do- 4sqmm (P6/2.3.4) Rmtr 66.15 66.15 499.0 False None None False None False 33008.85 0 2659149 82774 None Elecl code93 Do- 6sqmm (P6/2.3.5) Rmtr 96.6 96.6 150.0 False None None False None False 14490.0 0 2659150 82774 None Elecl code94 Do- 10sqmm (P6/2.3.6) Rmtr 175.35 175.35 70.0 False None None False None False 12274.5 0 2659151 82774 None Elecl code95 Do- 16sqmm(P6/2.3.7) Rmtr 333.9 333.9 50.0 False None None False None False 16695.0 0 2659152 82774 None Elecl code96 SRP.2.2.1.Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694. and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch box No 282.45 282.45 32.0 False None None False None False 9038.4 0 2659153 82774 None Elecl code97 Do- Medium point above 3 Mtr upto 6Mtr from tapping point to outlet via switch box. (P5/2.2.2) No 397.95 397.95 30.0 False None None False None False 11938.5 0 2659154 82774 None Elecl code98 Do- Long point above 6 Mtr upto 10Mtr from tapping point to outlet via switch box. (P5/2.2.3) No 582.75 582.75 35.0 False None None False None False 20396.25 0 2659155 82774 None Elecl code99 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1-3Way 3.4.1 No 144.9 144.9 25.0 False None None False None False 3622.5 0 2659156 82774 None Elecl code100 Do- 4-5way (P15/3.4.3) No 185.85 185.85 30.0 False None None False None False 5575.5 0 2659157 82774 None Elecl code101 Do-6 way (P15/3.4.4) No 231.0 231.0 40.0 False None None False None False 9240.0 0 2659158 82774 None Elecl code102 Do-10-12 way (P15/3.4.6) No 334.95 334.95 50.0 False None None False None False 16747.5 0 2659159 82774 None Elecl code103 Do-18 way (P15/3.4.8) No 425.25 425.25 6.0 False None None False None False 2551.5 0 2659160 82774 None Elecl code104 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metal/PVC box.1 to 3 Module 3.5.1 No 143.85 143.85 50.0 False None None False None False 7192.5 0 2659161 82774 None Elecl code105 Do- 4 module (P16/3.5.3) No 183.75 183.75 40.0 False None None False None False 7350.0 0 2659162 82774 None Elecl code106 Do- 6 Module (P16/3.5.4) No 245.7 245.7 40.0 False None None False None False 9828.0 0 2659163 82774 None Elecl code107 Do-10-12 Module (P16/3.5.6) No 361.2 361.2 50.0 False None None False None False 18060.0 0 2659164 82774 None Elecl code108 Do-18 Module (P16/3.5.8) No 479.85 479.85 10.0 False None None False None False 4798.5 0 2659165 82774 None Elecl code109 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch 3.6.1 No 107.1 107.1 210.0 False None None False None False 22491.0 0 2659166 82774 None Elecl code110 Do- 6Amps 3 way socket (P16/3.6.3) No 179.55 179.55 42.0 False None None False None False 7541.1 0 2659167 82774 None Elecl code111 Do- modular stepped fan regulator (P16/3.6.4) No 374.85 374.85 20.0 False None None False None False 7497.0 0 2659168 82774 None Elecl code112 Do- 16Amps one way switch (P16/3.6.7) No 189.0 189.0 15.0 False None None False None False 2835.0 0 2659169 82774 None Elecl code113 Do- 6/16 Amps universal socket (P16/3.6.10) No 247.8 247.8 16.0 False None None False None False 3964.8 0 2659170 82774 None Elecl code114 Supplying and fixing Fan box with round hook (P3/1.13) No 122.85 122.85 24.0 False None None False None False 2948.4 0 2659171 82774 None Elecl code115 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely 25mm 1.9.2 Mtr 23.1 23.1 70.0 False None None False None False 1617.0 0 2659172 82774 None Elecl code116 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70Percentage lumen maintenance with CRI morethan 80. Power Input. 220-240V @ 50/60Hz & Power factor morethan0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.11.3.2 LED light fighting 1 x4feet- 20/22 w No 724.5 724.5 50.0 False None None False None False 36225.0 0 2659173 82774 None Elecl code117 11.5.3. Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70Percentage lumen maintenance with CRI morethan 80. Power Input. 220-240V @ 50/60Hz & Power factor morethan0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W No 1390.2 1390.2 8.0 False None None False None False 11121.6 0 2659174 82774 None Elecl code118 Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRImorethan 70Percentage. Efficacy morethan100 lumen per watt, 120degree beam spread, lifemorethan 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF morethan 0.95, power loss should Less than 5Percentage of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20Percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2feetx2feet / 1feet x 4feet 34 -36watt 12.6.2 No 4780.65 4780.65 12.0 False None None False None False 57367.8 0 2659175 82774 None Elecl code119 11.8.4 Supply of LED Streetlight luminaire 90 watt with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70Percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT morethan 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire morethan IK08. Power Factor morethan0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencymorethan130lm/w, nominal CRI morethan75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001.2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.LED Streetlight 90 Watts No 9303.0 9303.0 12.0 False None None False None False 111636.0 0 2659176 82774 None Elecl code120 6.3.1..Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. No 3133.2 3133.2 6.0 False None None False None False 18799.2 0 2659177 82774 None Elecl code121 6.2.1.Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12inch Sweep (300mm) 7.2.1 No 3117.45 3117.45 4.0 False None None False None False 12469.8 0 2659178 82774 None Elecl code122 Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders 13.7.1 No 128.1 128.1 50.0 False None None False None False 6405.0 0 2659179 82774 None Elecl code123 Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.Using 40mm dia G.I.Pipe 13.2.3 No 1551.9 1551.9 10.0 False None None False None False 15519.0 0 2659180 82774 None Elecl code124 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing feetSfeet hook with fan regulator to the existing board together with supplying and fixing 5 amps. Ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.13.10 No 179.55 179.55 6.0 False None None False None False 1077.3 0 2659181 82774 None Elecl code125 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.13.13 No 742.35 742.35 4.0 False None None False None False 2969.4 0 2659182 82774 None Elecl code126 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and feetCfeet Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5.18.1 6-32Amps SP No 435.75 435.75 50.0 False None None False None False 21787.5 0 2659183 82774 None Elecl code127 Do- 6-32 Amps DP. (5.18.2) No 775.95 775.95 30.0 False None None False None False 23278.5 0 2659184 82774 None Elecl code128 Do- 6-32 Amps TPN. (5.18.7) No 1802.85 1802.85 8.0 False None None False None False 14422.8 0 2659185 82774 None Elecl code129 Do- 50-63Amps TPN . (5.18.9) No 3242.4 3242.4 2.0 False None None False None False 6484.8 0 2659186 82774 None Elecl code130 11.2.1.Supplying & fixing retrofit type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRImorethan 70Percentage. efficacy morethan80 lumen per watt, lifemorethan 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF morethan 0.95, power loss should Less than 5Percentage of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20Percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 654.15 654.15 4.0 False None None False None False 2616.6 0 2659187 82774 None Elecl code131 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (Icu = Ics) 5.14.9 160Amps 25kA. No 14119.35 14119.35 3.0 False None None False None False 42358.05 0 2659188 82774 None Elecl code132 5.30.Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. No 1449.0 1449.0 10.0 False None None False None False 14490.0 0 2659189 82774 None Elecl code133 Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.5.29 No 1496.25 1496.25 1.0 False None None False None False 1496.25 0 2659190 82774 None Elecl code134 Supplying, fixing and wiring 50/5Amps to 400/5 Amps 5VA burden current transformer. 0.5 accuracy. (5.34) No 590.1 590.1 3.0 False None None False None False 1770.3 0 2659191 82774 None Elecl code135 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50Hz 12/24v DC (5.38) No 540.75 540.75 3.0 False None None False None False 1622.25 0 2659192 82774 None Elecl code136 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.14SWG 5.42.1 (Unit Sqcm) Sqm 0.53 0.53 100000.0 False None None False None False 53000.0 0 2659193 82774 None Elecl code137 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminium Strips 5.40.1 Mtr 2588.25 2588.25 1.0 False None None False None False 2588.25 0 2659194 82774 None Elecl code138 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40x40x6mm 5.41.1 Mtr 320.25 320.25 12.0 False None None False None False 3843.0 0 2659195 82774 None Elecl code139 12.56.Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipmentfeets on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 3685.5 3685.5 15.0 False None None False None False 55282.5 0 2659196 82774 None Elecl code140 12.57.Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. No 4468.8 4468.8 4.0 False None None False None False 17875.2 0 2659197 82774 None Elecl code141 12.58.2.Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip. Rmtr 86.1 86.1 30.0 False None None False None False 2583.0 0 2659198 82774 None Elecl code142 Gescom sr/11KV materials/134/18.01.LT Distribution Box for 100 kVA DTC with MCCBfeets (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) Each 23820.3 23820.3 1.0 False None None False None False 23820.3 0 2659199 82774 None Elecl code143 Gescom sr/11KV materials/207/32.11. 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 187921.65 187921.65 0.1 False None None False None False 18792.165 0 2659200 82774 None Elecl code144 Gescom sr/11KV Labour/176/21.06. Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm Km 32695.95 32695.95 0.1 False None None False None False 3269.595 0 2659201 82774 None Elecl code145 Vol I/1.14.1.Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1 Cum 107.1 107.1 80.0 False None None False None False 8568.0 0 2659202 82774 None Elecl code146 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 No 3.15 3.15 180.0 False None None False None False 567.0 0 2659203 82774 None Elecl code147 Do- 2.5 sqmm. (6.17.2) No 4.2 4.2 220.0 False None None False None False 924.0 0 2659204 82774 None Elecl code148 Do- 4.0 sqmm. (6.17.3) No 7.35 7.35 60.0 False None None False None False 441.0 0 2659205 82774 None Elecl code149 Do- 6 sqmm. (6.17.4) No 7.35 7.35 24.0 False None None False None False 176.4 0 2659206 82774 None Elecl code150 Do- 10sqmm.(6.17.5) No 8.4 8.4 24.0 False None None False None False 201.6 0 2659207 82774 None Elecl code151 Do- 16 sqmm. (6.17.6) No 13.06 13.06 12.0 False None None False None False 156.72 0 2659208 82774 None Elecl code152 Do- 50 sqmm Long Barrel. (6.17.9) No 63.0 63.0 16.0 False None None False None False 1008.0 0 2659209 82774 None Elecl code153 VOL-5/10.1.4.Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for.PVC pipes 63mm dia., 6 kg/sqcm & class 3 Mtr 169.05 169.05 100.0 False None None False None False 16905.0 0 2659210 82774 None Elecl code154 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.5.33 Each 9780.75 9780.75 1.0 False None None False None False 9780.75 0 2659211 82774 None Elecl code155 VOl-6/KPTCL/P.No-158.Jelly Spreading (20-25 mm) . Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete.Work shall be carried out as per the instructions of Engineerin-charge of works as per the standard procedure Cum 1861.65 1861.65 2.0 False None None False None False 3723.3 0 2659212 82774 None Elecl code156 Gescom sr/11KV materials/536/66.04.HDPE/PLB Pipe 50/42 mm Km 89264.7 89264.7 0.14 False None None False None False 12497.058 0 2659213 82774 None Elecl code157 PWD SR/Vol-5/13.11.5.Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP 3.00 HP - 90 LPM @ 66 m = 6 STG Outlet Dia - 2.00” Each 29518.65 29518.65 1.0 False None None False None False 29518.65 0 2659214 82774 None Elecl code158 PWD SR/Vol-5/12.28.Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and released pump set should be handed over to department) including transportation (Each length = 6 m) Job 196.35 196.35 15.0 False None None False None False 2945.25 0 2659215 82774 None Elecl code159 2.6.2.Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13.8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694.2010. Rmtr 176.4 176.4 140.0 False None None False None False 24696.0 0 2659216 82774 None Elecl code160 5.1.Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 V 1/3 phase motor upto 5 HP. Each 2023.35 2023.35 1.0 False None None False None False 2023.35 0 2659217 82774 None Elecl code161 Gescom SR/SSM 11KV/88/12.04.Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1). 2014 63 kVA, Aluminum Wdg, Star 2 (5 Star) No 191672.25 191672.25 1.0 False None None False None False 191672.25 0 2659218 82774 None Elecl code162 Gescom SR/11KV Labour/72/8.01. Erection of 25 to 63 kVA Transformer on Transformer Structure No 1252.65 1252.65 1.0 False None None False None False 1252.65 0 2659219 82774 None Elecl code163 Gescom SR/SSM 11KV/1/1.01.RCC Pole - 9 Mtr Long, 145 Kg WL No 7429.8 7429.8 2.0 False None None False None False 14859.6 0 2659220 82774 None Elecl code164 Gescom SR/11KV Labour/30/2.02.Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 1168.65 1168.65 2.0 False None None False None False 2337.3 0 2659221 82774 None Elecl code165 Gescom SR/SSM 11KV/11/2.01.11 kV, Horizontal Cross Arm - Mild Steel (MS)(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) No 390.6 390.6 4.0 False None None False None False 1562.4 0 2659222 82774 None Elecl code166 Gescom SR/11KV Labour/51/5.03.Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing No 269.85 269.85 4.0 False None None False None False 1079.4 0 2659223 82774 None Elecl code167 Gescom SR/SSM 11KV/47/6.01.11 kV Ceramic Pin Insulator (Shell only) No 87.15 87.15 12.0 False None None False None False 1045.8 0 2659224 82774 None Elecl code168 Gescom SR/SSM 11KV/55/6.09.DISC Insulator 45 kN Porcelain No 535.5 535.5 12.0 False None None False None False 6426.0 0 2659225 82774 None Elecl code169 Gescom SR/SSM 11KV/166/24.01.11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) No 9922.5 9922.5 1.0 False None None False None False 9922.5 0 2659226 82774 None Elecl code170 Gescom SR/11KV Labour/97/13.02.Fixing of GOS including wiring (11 kV Single Break 200 Amps) No 1159.2 1159.2 1.0 False None None False None False 1159.2 0 2659227 82774 None Elecl code171 Gescom SR/SSM 11KV/39/5.09, 5.11, 5.12, 5.13, 5.14, 5.16. Guy Clamp - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)Anchor Rod using 12 mm rounds/Guy Rod - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)MS Fish Plate Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator No 1785.0 1785.0 3.0 False None None False None False 5355.0 0 2659228 82774 None Elecl code172 Gescom SR/11KV Labour/58/5.10.Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) No 279.3 279.3 3.0 False None None False None False 837.9 0 2659229 82774 None Elecl code173 Gescom SR/SSM 11KV/137/19.01. 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) Set 966.0 966.0 1.0 False None None False None False 966.0 0 2659230 82774 None Elecl code174 Gescom SR/11KV Labour/101/13.06.Fixing of 3 Nos Lightning Arrestor including wiring Set 124.95 124.95 1.0 False None None False None False 124.95 0 2659231 82774 None Elecl code175 Gescom SR/SSM 11KV/139/20.01.11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Set 1122.45 1122.45 1.0 False None None False None False 1122.45 0 2659232 82774 None Elecl code176 Gescom SR/11KV Labour/96/13.01.Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring Set 248.85 248.85 1.0 False None None False None False 248.85 0 2659233 82774 None Elecl code177 Gescom SR/SSM 11KV/59/7.02.Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt. 214 Kg/KM Km 48545.7 48545.7 0.2 False None None False None False 9709.14 0 2659234 82774 None Elecl code178 15.111.Supplying of four bucket stand alongwith buckets. Complete No 1942.5 1942.5 2.0 False None None False None False 3885.0 0 2659235 82774 None Elecl code179 15.117.Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications. No 1995.0 1995.0 2.0 False None None False None False 3990.0 0 2659236 82774 None Elecl code180 15.113.Supplying of Hand gloves. complete Pair 1023.75 1023.75 2.0 False None None False None False 2047.5 0 2659237 82774 None Elecl code181 15.114.Supplying of first aid box. complete No 630.0 630.0 2.0 False None None False None False 1260.0 0 2659238 82774 None Elecl code182 15.116.Supplying of FIRST AID CHART with lamination. Complete No 420.0 420.0 2.0 False None None False None False 840.0 0 2659239 82774 None Elecl code183 Ges SR/SSM 11KV/593/68.17.Caution/Danger Board No 157.5 157.5 6.0 False None None False None False 945.0 0 2659240 82774 None Elecl code184 21-22/Vol-4/Part-B/Liftrrigation/4.41.Providing and fixing chain link fencing consisting of 3 m long 65 x 65 x 6 mm M.S angles with top 50 cm bent at 30 degree to vertical fixed at 2.5 m intervals in C.C 1 . 3 . 6 proportion using 20 mm down graded coarse aggregate for 70 cm depth, fixing 50 x 50 mm opening 8 gauge G.I chain link mesh upto 1.8 m height of poles using 8 gauge stretcher wire at top and bottom and 30 x 30 x 5 mm M.S angles with bolts /nuts / washers ( 4 bolts for each pole ), fixing 3 rows of 12 gauge ( 4 barbs at 7.5 cm c/c ) G.I barbed wire for top bent portion of poles, including cost of all materials, machinery, labour, excavation of pit, mixing and laying concrete, curing, drilling holes in angles, cleaning angles, painting angles and Chain links with 2 coats of synthetic enamel paint over a coat of primer etc., complete with all lead and lifts. Sqm 1444.8 1444.8 24.0 False None None False None False 34675.2 0 2659241 82774 None Elecl code185 5.20.2.Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. No 4786.95 4786.95 1.0 False None None False None False 4786.95 0 2659242 82774 None Elecl code186 Do- 63 Amps 4 pole (5.20.3) No 5520.9 5520.9 1.0 False None None False None False 5520.9 0 2659243 82774 None Elecl code187 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCBfeets single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.5.19.6 4Way SP &N No 1600.2 1600.2 10.0 False None None False None False 16002.0 0 2659244 82774 None Elecl code188 Do- 8way SP &N.(5.19.8) Double door. No 1946.7 1946.7 2.0 False None None False None False 3893.4 0 2659245 82774 None Elecl code189 Do- 12way SP &N. (5.19.9) Double door. No 2445.45 2445.45 2.0 False None None False None False 4890.9 0 2659246 82774 None Elecl code190 5.29.Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. No 1496.25 1496.25 1.0 False None None False None False 1496.25 0 2659247 82774 None Elecl code191 Supplying, fixing and wiring 50/5Amps to 400/5 Amps 5VA burden current transformer. 0.5 accuracy. (5.34) No 590.1 590.1 6.0 False None None False None False 3540.6 0 2659248 82774 None Elecl code192 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50Hz 12/24v DC (5.38) No 540.75 540.75 6.0 False None None False None False 3244.5 0 2659249 82774 None Elecl code193 PWD SR/Vol-2/11.16.1.Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 142.8 142.8 200.0 False None None False None False 28560.0 0 2659250 82774 None Elecl code194 12.57.Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.12.57 No 4468.8 4468.8 4.0 False None None False None False 17875.2 0 2659251 82774 None Elecl code195 Gescom SR/SSM 11KV/61/8.02.8 SWG GI Wire (4.064 mm Dia), Std Wt. 131 Kg/KM Km 78792.0 78792.0 0.04 False None None False None False 3151.68 0 2659252 82774 None Elecl code196 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 12.58.1 Mtr 86.1 86.1 20.0 False None None False None False 1722.0 0 2659253 82774 None Elecl code197 Gescom sr/SSM 11KV/207/32.11. 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 187921.65 187921.65 0.3 False None None False None False 56376.495 0 2659254 82774 None Elecl code198 Gescom sr/11KV Labour/176/21.06. Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm Km 32695.95 32695.95 0.3 False None None False None False 9808.785 0 2659255 82774 None Elecl code199 Vol I/1.14.1.Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1 Cum 107.1 107.1 99.0 False None None False None False 10602.9 0 2659256 82774 None Elecl code200 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR) No 3.15 3.15 60.0 False None None False None False 189.0 0 2659257 82774 None Elecl code201 Do- 2.5 sqmm. (6.17.2) No 4.2 4.2 80.0 False None None False None False 336.0 0 2659258 82774 None Elecl code202 Do- 4.0 sqmm. (6.17.3) No 7.35 7.35 23.0 False None None False None False 169.05 0 2659259 82774 None Elecl code203 Do- 6 sqmm. (6.17.4) No 7.35 7.35 24.0 False None None False None False 176.4 0 2659260 82774 None Elecl code204 Do- 10sqmm.(6.17.5) No 8.4 8.4 24.0 False None None False None False 201.6 0 2659261 82774 None Elecl code205 Do- 16 sqmm. (6.17.6) No 13.06 13.06 12.0 False None None False None False 156.72 0 2659262 82774 None Elecl code206 Do- 50 sqmm Long Barrel. (6.17.9) No 63.0 63.0 16.0 False None None False None False 1008.0 0 2659263 82774 None Elecl code207 Vol V/191/16.9.onstructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1.6, bed concrete 150mm thick with 1.3.6, plastering 12 mm thick with cement mortar 1.4, CC 1.2.4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. No 5726.7 5726.7 4.0 False None None False None False 22906.8 0 2659264 82774 None Elecl code208 Vol V/10.1.8.Providing PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete 110mm Rmtr 431.55 431.55 142.0 False None None False None False 61280.1 0 2659265 82774 None Elecl code209 Vol II/09/5.4.(Size stone masonry) Construction of Platform with size stone, cement concrete for errection of Transformer/Metering Cubicle /Heavy equipment. Construction of platform [1.5m x 1.5m x 1.2m] in size srone , for errection of transformer /Heavy equipment including all materials , labour Excavation of [1.5mx1.5mx1m] pit for foundation providing and laying cement concrete 1.4.8 for foundation laid in 10cm thick layers, well compacted curing etc, complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement morter 1.6 Providing and Laying cement concrete slab 1.5x1.5x.10mtr with cement concrete of 1.2.4 mix forming & cutting complete , providing pointing to stone masonary in cement morter 1.3 after rackng joint & nisely lining curing etc, plastering the concrete surfaces in cement morter 1.4 including smooth randering curing etc, curing at every stages completely. Cum 6708.45 6708.45 2.7 False None None False None False 18112.815 0 2659266 82774 None Elecl code210 Gescom SR/SSM 11KV/398/53.04.LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW) Each 2499.0 2499.0 1.0 False None None False None False 2499.0 0 2659267 82774 None Elecl code211 4.1.1.Fabricating, supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5 Way connector of size 167 x 125 x 82 mm for 7.5M Pole/ 200 x 160 x 98 mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch, The Pole shall be erected in cement concrete work (1.2.4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS2713-7.Erection of heavy duty Pole on Footpath/median 9m (5m Hb,165.1 mm dia 4.85 mm thick x 2m Hm, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 32 No 16275.0 16275.0 12.0 False None None False None False 195300.0 0 2659268 82774 None Elecl code212 12.8.4 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70Percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT morethan 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire morethan IK08. Power Factor morethan0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencymorethan130lm/w, nominal CRI morethan75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001.2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.LED Streetlight 90 Watts No 9303.0 9303.0 12.0 False None None False None False 111636.0 0 2659269 82774 None Elecl code213 Gescom sr/SSM 11KV/198/32.02. 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) Km 83193.6 83193.6 0.4 False None None False None False 33277.44 0 2659270 82774 None Elecl code214 Gescom sr/11KV Labour/175/21.05. Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm Km 21930.3 21930.3 0.4 False None None False None False 8772.12 0 2659271 82774 None Elecl code215 Vol I/1.14.1.Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1 Cum 107.1 107.1 120.0 False None None False None False 12852.0 0 2659272 82774 None Elecl code216 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.5 (2019-20 SR)10sqmm. No 8.4 8.4 80.0 False None None False None False 672.0 0 2659273 82774 None Elecl code217 Vol V/10.1.8.Providing PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete 110mm Mtr 431.55 431.55 120.0 False None None False None False 51786.0 0 2659274 82774 None Elecl code218 11.1.Supplying & fixing - flexible LED Strip Light ..... W Power consumption in 5 ms length CCT6500 degree K, CRImorethan 70Percentage. efficacy morethan80 lumen per W, lifemorethan 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver non integrated, with PF morethan 0.95, power loss shouldLess than 5Percentage of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20Percentage, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition. Rmtr 1355.55 1355.55 239.0 False None None False None False 323976.45 0 2659275 82774 None Elecl code219 3.8.Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws (Unit Sqcm) Sqm 0.43 0.43 160000.0 False None None False None False 68800.0 0 2659276 82774 None Elecl code220 PWD SR/2023-24/Vol-II/Material Components/A-12/ii/23.Aluminium Composite of approved colour straight portion. Sqm 3150.0 3150.0 16.0 False None None False None False 50400.0 0 2659277 82774 None Elecl code221 PWD SR/2023-24/Vol-II/7.64.1.1.Aluminium fluted strips 3.15 mm thick.150 mm wide (but used 50 mm wide hence Rs.557/3=185.66 taken) Rmtr 194.94 194.94 120.0 False None None False None False 23392.8 0 2659278 82774 None Elecl code222 PWD SR/2023-24/Vol-II/10.15.1.Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete Cum 4188.45 4188.45 12.0 False None None False None False 50261.4 0 2659279 82774 None Elecl code223 5.41.4.Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50 x 100 x 50 x 6 mm C channel (but used 25x50 mm square pipe) hence 0.65 taken Mtr 515.97 515.97 36.0 False None None False None False 18574.92 0 2659280 82774 None Elecl code224 5.47.Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.) 3-120sec setting. Each 2430.75 2430.75 2.0 False None None False None False 4861.5 0 2659281 82774 None Elecl code225 5.13.2.Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A Each 2370.9 2370.9 1.0 False None None False None False 2370.9 0 2659282 82774 None Elecl code226 5.13.3.Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60 A Each 6247.5 6247.5 1.0 False None None False None False 6247.5 0 2659283 82774 None Elecl code227 PWD SR/2023-24/Vol-I/A-40/77.Mild Steel Tubes 14 guage 1inch x 1inch squire pipe Kg 63.0 63.0 300.0 False None None False None False 18900.0 0 2659284 82774 None Elecl code228 PWD SR/2023-24/Vol-III/8.7/801.Direction and Place Identification Signs upto 0.9 m2 Size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC.67.2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing Sqm 9460.5 9460.5 8.2 False None None False None False 77576.1 0 2659285 82774 None Elecl code229 PWD SR/2023-24/Vol-II/11.28.Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 120.0 False None None False None False 71190.0 0 2659286 82774 None Elecl code230 PWD SR/2023-24/Vol-III/8.43.Supplying and Fixing of Molded Shank Raised Pavement Markers / Catfeets Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than19 +/- 2 mm and height not less than30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be bydrilling holes on the road for the shanks to go inside,without nails and using epoxy resin based adhesive as per manufacturerfeets recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. Each 383.25 383.25 70.0 False None None False None False 26827.5 0 2659287 82774 None Elecl code231 PWD SR/2023-24/Vol-III/8.45.Providing Vertical Delineator having wide angle cube corner micro prismatic non metallic reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and Red Color combination and having minimum of retro reflective exposed area of 125 Sq CM on top slots and 35 cm2 on bottom slots and no edges shall be exposed for tampering. This tubular delineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body and the inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm.and coreshell structure shall be of height not less than 800 mm above the ground and width not less than 80 mm. The metallic core of the delineator shall extend 300mm beyond the shell length from bottom for installing in the ground. The extended portion shall have slots to insert anchoring rods for enhancing the concrete grip. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process.The engineering thermoplastic used for making the delineator body shall have minimum initial mechanical properties of be fixed by a combination of epoxy adhesive and grouting as per MoRTH specification 806 Each 3045.0 3045.0 10.0 False None None False None False 30450.0 0 2659288 82774 None Elecl code232 PWD SR/2023-24/Vol-III/8.15.Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC.35.2015.The finished surface to be level,uniform and free from streaks and holes. Sqm 556.5 556.5 100.0 False None None False None False 55650.0 0 2659289 82774 None Elecl code233 PWD SR/2023-24/Vol-III/8.53.Providing & fixing Polymer rubberised factory made Black & Yellow coloured Speed retarders/Breakers with width 350mm & Height 50mm as per IRC 99.2018 with load carrying capacity upto 30t in local streets, parking arena and in areas with speed limit of 20 kmph as per direction of Engineer in-charge. Mtr 945.0 945.0 46.0 False None None False None False 43470.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1708089009000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1708089009000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1708089009000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1708089135000 0 None None ELIGIBILITY Should be a valid Class-I Civil Contractor registered in Karnataka CPWD/MES/KPWD (Upload Registration Certificate for the block period 2020-25.) None 1708089165000 0 None None ELIGIBILITY Should have successfully completed at least one work of similar nature of building work, costing not less than Rs. 182.50 lakhs (Rs. one hundred eighty two lakh & fifty thousand) i.e from 01/04/2018 onwards for any of the Govt. Public Sector Corporate undertakings. (Certificate of completion issued by an officer not below the rank of Executive Engineer, in case of Govt., / Public Sectors under takings.) None 1708089595000 1 None None ELIGIBILITY Attach the documents as per tender Notification None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None As per attached tender notification Others Attach the documents as per tender notification createdTs version createdDate modifiedDate documentName None None None None Others -- Attach the documents as per tender notification
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Attach the documents as per tender notification True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1708092172000 version 0 createdDate None modifiedDate None blockNumber KKRTC Kalaburagi street None city Kalaburagi state Karnataka pin 585102
tenderRecallDTO	None