createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1707915040048 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 337720.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 23-02-2024 16:00:30 tenderQueryClose 22-02-2024 14:36:24 technicalBidOpen 24-02-2024 16:23:49 publishedDate 16-02-2024 13:40:05 publishedByPost PWD_EE_DIV_BID publishedByUser KPE14569 - SHIVSHANKER V KAMSHETTY bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 21-02-2024 16:35:51 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Shivshanker kamshetty splitEmdRequiredYn True emdBankGuarantee 237720.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08482226440 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1707915040077 version 4 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT8481 title CONSTRUCTION OF POST METRIC BOYS HOSTEL AND COMPOUND WALL NEAR APMC BELONGING TO BCM DEPARTMENT AT BHALKI TOWN, IN BIDAR DISTRICT description CONSTRUCTION OF POST METRIC BOYS HOSTEL AND COMPOUND WALL NEAR APMC BELONGING TO BCM DEPARTMENT AT BHALKI TOWN, IN BIDAR DISTRICT category WORKS categoryText Works ecv 22514663.18 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1692 locationName PWD Division Office Bidar provisionalAmount 26817000.0 groupOverheadTotal 0.0 fileNumber PWD/Bhalki/KKRDB/23-24/AB/1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1707915040000 0 None None Buildings Ground Floor- Civil 6366468.81 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2592867 80723 None PWD UNI SR 23-24 Vol-1 Item no. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work Page No.8 Item No. 1.12 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 99.75 99.75 120.0 False None None False None False 11970.0 0 2592868 80723 None PWD UNI SR 23-24 Vol-1 Item no. 1.15.1 Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.8 Item No. 1.15.1 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 381.15 381.15 325.66 False None None False None False 124125.309 0 2592869 80723 None PWD UNI SR 23-24 Vol-1 Item no. 1.15.2 Earth work excavation Depth exceeding 1.5 m, but not exceeding 3 m for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Page No.9 Item No. 1.15.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 446.25 446.25 158.4 False None None False None False 70686.0 0 2592870 80723 None PWD UNI SR 23-24 Vol-1 Item no. 1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Page No. 7 Item No. 1.11 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 454.65 454.65 403.4 False None None False None False 183405.81 0 2592871 80723 None PWD UNI SR 23-24 Vol-2 Item no. 4.1 KSRB-3.2: Providing and injecting chemical emulsion for Pre- constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. (Plinth area of the building at ground floor only shall be measured ) Page No.5 Item No. 4.1 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 123.9 123.9 355.39 False None None False None False 44032.821 0 2592872 80723 None PWD UNI SR 23-24 Vol-1 Item no. 2.1.4 Providing and laying in position plain cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Page No.15 Item No. 2.1.4 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 6527.85 6527.85 48.33 False None None False None False 315490.9905 0 2592873 80723 None PWD UNI SR 23-24 Vol-1 Item no. 2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.4.3 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 6652.8 6652.8 68.82 False None None False None False 457845.696 0 2592874 80723 None PWD UNI SR 23-24 Vol-1 Item no. 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.5.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 7185.15 7185.15 85.86 False None None False None False 616916.979 0 2592875 80723 None 111 FOOTING CENTERING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 532.22 532.22 65.23 False None None False None False 34716.7106 0 2592876 80723 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Cum 4656.96 4656.96 3.59 False None None False None False 16718.4864 0 2592877 80723 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Cum 5029.61 5029.61 10.37 False None None False None False 52157.0557 0 2592878 80723 None 111 PLINTH BEAMS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 1a.Volumn -1 KPWD SR 2023-24, . PLINTH BEAM rcc Qty Cum 3592.58 3592.58 12.29 False None None False None False 44152.8082 0 2592879 80723 None 112 BEAMS & lintels CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 14.Volumn -1 KPWD SR 2023-24, . Lintel beam rcc Qty Cum 4311.09 4311.09 14.69 False None None False None False 63329.9121 0 2592880 80723 None 112 ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, . roof slab rcc & STAIRCASE Qty Cum 3592.58 3592.58 47.42 False None None False None False 170360.1436 0 2592881 80723 None 112 CHAJJA CENTRING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.112 Sl.no.19 KPWD. Volumn -1 KPWD SR 2023-24, . CHAJJA Qty Cum 3233.32 3233.32 1.08 False None None False None False 3491.9856 0 2592882 80723 None PWD UNI SR 23-24 Vol-2 Item no. 5.5 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM1:6 : Page No.9 Item No. 5.5 KPWD. Volumn -2 DSR 2023-24 Cum 6696.9 6696.9 46.04 False None None False None False 308325.276 0 2592883 80723 None PWD UNI SR 23-24 Vol-2 Item no. 5.6 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM1:6 : Page No.9 Item No. 5.6 KPWD. Volumn -2 DSR 2023-24 Cum 6770.4 6770.4 6.66 False None None False None False 45090.864 0 2592884 80723 None PWD UNI SR 23-24 Vol-2 Item no. 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 13 Item.no 6.7 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 8621.55 8621.55 56.51 False None None False None False 487203.7905 0 2592885 80723 None PWD UNI SR 23-24 Vol-2 Item no. 6.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 14 Item.no 6.14 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1113.0 1113.0 49.23 False None None False None False 54792.99 0 2592886 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Page No.43 Item no.8.10 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 221.55 221.55 192.92 False None None False None False 42741.426 0 2592887 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials curing complete as per specifications and as per directions Page No.42 Item no.8.6.1 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 339.15 339.15 395.56 False None None False None False 134154.174 0 2592888 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.5.1 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing Page No.42 Item no.8.9 KPWD. Volumn -2 KPWD SR 2023-24,Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing Page No.42 Item no.8.5.1 KPWD. Volumn -2 KPWD SR 2023-24, Sqm 384.3 384.3 256.13 False None None False None False 98430.759 0 2592889 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Page No.50 Item no.8.51 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 105.0 105.0 588.48 False None None False None False 61790.4 0 2592890 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.2 Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. Page No.99 Item no. 12.2 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 128518.95 128518.95 0.56 False None None False None False 71970.612 0 2592891 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.20 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Page No.100 Item no. 12.20 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 6457.5 6457.5 15.0 False None None False None False 96862.5 0 2592892 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications Page No.105 Item no. 12.51 KPWD. Volumn -2 KPWD SR 2023-24, . No 1550.85 1550.85 5.0 False None None False None False 7754.25 0 2592893 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately Size 62 x 125mm Page No.111 Item no. 12.93.2 KPWD. Volumn -2 KPWD SR 2023-24 m 802.2 802.2 39.9 False None None False None False 32007.78 0 2592894 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.94.2 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately 35 mm thickness Page No.112 Item no. 12.94.2 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 4243.05 4243.05 11.03 False None None False None False 46800.8415 0 2592895 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm . Page No.107 Item no. 12.74.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 107.1 107.1 51.0 False None None False None False 5462.1 0 2592896 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm Page No.107 Item no. 12.76.2 KPWD. Volumn -2 KPWD SR 2023-24, . No 367.5 367.5 17.0 False None None False None False 6247.5 0 2592897 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.79.1 Providing and fixing bright finished brass handles with screws etc. complete: Page No.108 Item no. 12.79.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 261.45 261.45 17.0 False None None False None False 4444.65 0 2592898 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.90 Providing & fixing of 3 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum iO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall Sqm 7070.7 7070.7 20.7 False None None False None False 146363.49 0 2592899 80723 None PWD UNI SR 23-24 Vol-2 Item no. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame havinoverall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Page No. 109 Item no. 12.85 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 6004.95 6004.95 2.4 False None None False None False 14411.88 0 2592900 80723 None PWD UNI SR 23-24 Vol-2 Item no. 11.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Page No. 77 Item no. 11.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 8689.8 8689.8 7.5 False None None False None False 65173.5 0 2592901 80723 None PWD UNI SR 23-24 Vol-2 Item no. 11.34.A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Page No. 86 Item no. 11.34A KPWD. Volumn -2 KPWD SR 2023-24, . Kg 176.4 176.4 485.1 False None None False None False 85571.64 0 2592902 80723 None PWD UNI SR 23-24 Vol-2 Item no. 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval ofEngineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Page No.85 Item no.11.28 KPWD. Volumn -2 KPWD SR 2023-24 Kg 593.25 593.25 233.0 False None None False None False 138227.25 0 2592903 80723 None PWD UNI SR 23-24 Vol-2 Item no. 9.22.2 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by thE manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Page No.62 Item no.9.22.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1392.3 1392.3 50.34 False None None False None False 70088.382 0 2592904 80723 None PWD UNI SR 23-24 Vol-2 Item no. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. .Page No.63 Item no.9.24 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 2994.6 2994.6 78.4 False None None False None False 234776.64 0 2592905 80723 None PWD UNI SR 23-24 Vol-2 Item no. 9.7.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Page No.59 Item no 9.7.1 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1308.3 1308.3 38.43 False None None False None False 50277.969 0 2592906 80723 None PWD UNI SR 23-24 Vol-2 Item no. 9.7.2 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile coarse sand) with Acid and alkali resistant tile Page No.60 Item no 9.7.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1323.0 1323.0 119.28 False None None False None False 157807.44 0 2592907 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.43.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.34.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 52.5 52.5 34.35 False None None False None False 1803.375 0 2592908 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.33.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 145.95 145.95 34.35 False None None False None False 5013.3825 0 2592909 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.33.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 144.9 144.9 30.0 False None None False None False 4347.0 0 2592910 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.32 KPWD. Volumn -2 KPWD SR 2023-24, . Qty as per CEILING PLASTER AS PER INSIDE PLASTERING Sqm 163.8 163.8 588.48 False None None False None False 96393.024 0 2592911 80723 None PWD UNI SR 23-24 Vol-2 Item no. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.31 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 186.9 186.9 256.13 False None None False None False 47870.697 0 2592912 80723 None PWD UNI SR 23-24 Vol-1 Item no. 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Page No.18 Item no. 2.11a KPWD. Volumn -1 KPWD SR 2023-24, . Tonne 93929.85 93929.85 15.26 False None None False None False 1433369.511 0 2592913 80723 None vol1 pg no.54 item no 1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramm vol1 pg no.54 item no 1.23 Cum 2816.1 2816.1 10.0 False None None False None False 28161.0 0 2592914 80723 None vol2 pg no.125 item no.13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A 100MM DIA, including vol2 pg no.125 item no.13.48 m 305.55 305.55 240.0 False None None False None False 73332.0 0 1707915040000 0 None None Buildings First Floor - Civil 4567069.51 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2592915 80724 None PWD UNI SR 23-24 Vol-1 Item no. 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.5.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 7253.58 7253.58 66.08 False None None False None False 479316.5664 0 2592916 80724 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Cum 5077.51 5077.51 8.4 False None None False None False 42651.084 0 2592917 80724 None 112 BEAMS & lintels CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 14.Volumn -1 KPWD SR 2023-24, . Lintel beam rcc Qty Cum 4352.15 4352.15 14.71 False None None False None False 64020.1265 0 2592918 80724 None 112 ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, . roof slab rcc & STAIRCASE Qty Cum 3626.79 3626.79 41.53 False None None False None False 150620.5887 0 2592919 80724 None 112 CHAJJA CENTRING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.112 Sl.no.19 KPWD. Volumn -1 KPWD SR 2023-24, . CHAJJA Qty Cum 3264.11 3264.11 1.44 False None None False None False 4700.3184 0 2592920 80724 None PWD UNI SR 23-24 Vol-2 Item no. 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 13 Item.no 6.7 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 8703.66 8703.66 78.28 False None None False None False 681322.5048 0 2592921 80724 None PWD UNI SR 23-24 Vol-2 Item no. 6.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 14 Item.no 6.14 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1123.6 1123.6 65.2 False None None False None False 73258.72 0 2592922 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Page No.43 Item no.8.10 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 223.66 223.66 237.97 False None None False None False 53224.3702 0 2592923 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials curing complete as per specifications and as per directions Page No.42 Item no.8.6.1 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 408.1 408.1 653.64 False None None False None False 266750.484 0 2592924 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.5.1 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing Page No.42 Item no.8.5.1 KPWD. Volumn -2 KPWD SR 2023-24, Sqm 387.96 387.96 215.94 False None None False None False 83776.0824 0 2592925 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Page No.50 Item no.8.51 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 106.0 106.0 891.61 False None None False None False 94510.66 0 2592926 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.2 Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. Page No.99 Item no. 12.2 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 129742.94 129742.94 0.67 False None None False None False 86927.7698 0 2592927 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.20 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Page No.100 Item no. 12.20 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 6519.0 6519.0 18.0 False None None False None False 117342.0 0 2592928 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications Page No.105 Item no. 12.51 KPWD. Volumn -2 KPWD SR 2023-24, . No 1565.62 1565.62 6.0 False None None False None False 9393.72 0 2592929 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately Size 62 x 125mm Page No.111 Item no. 12.93.2 KPWD. Volumn -2 KPWD SR 2023-24 m 809.84 809.84 85.5 False None None False None False 69241.32 0 2592930 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.94.2 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately 35 mm thickness Page No.112 Item no. 12.94.2 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 4283.46 4283.46 22.05 False None None False None False 94450.293 0 2592931 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm . Page No.107 Item no. 12.74.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 108.12 108.12 78.0 False None None False None False 8433.36 0 2592932 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm Page No.107 Item no. 12.76.2 KPWD. Volumn -2 KPWD SR 2023-24, . No 371.0 371.0 26.0 False None None False None False 9646.0 0 2592933 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.79.1 Providing and fixing bright finished brass handles with screws etc. complete: Page No.108 Item no. 12.79.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 263.94 263.94 26.0 False None None False None False 6862.44 0 2592934 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.90 Providing & fixing of 3 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum iO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall Sqm 7138.04 7138.04 25.2 False None None False None False 179878.608 0 2592935 80724 None PWD UNI SR 23-24 Vol-2 Item no. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame havinoverall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Page No. 109 Item no. 12.85 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 6062.14 6062.14 4.8 False None None False None False 29098.272 0 2592936 80724 None PWD UNI SR 23-24 Vol-2 Item no. 11.34.A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Page No. 86 Item no. 11.34A KPWD. Volumn -2 KPWD SR 2023-24, . Kg 178.08 178.08 630.0 False None None False None False 112190.4 0 2592937 80724 None PWD UNI SR 23-24 Vol-2 Item no. 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval ofEngineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Page No.85 Item no.11.28 KPWD. Volumn -2 KPWD SR 2023-24 Kg 598.9 598.9 77.0 False None None False None False 46115.3 0 2592938 80724 None PWD Uni SR 23-24 vol-9.22.2 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by thE manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Page No.62 Item no.9.22.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1405.56 1405.56 129.5 False None None False None False 182020.02 0 2592939 80724 None PWD UNI SR 23-24 Vol-2 Item no. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. .Page No.63 Item no.9.24 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 3023.12 3023.12 51.49 False None None False None False 155660.4488 0 2592940 80724 None PWD UNI SR 23-24 Vol-2 Item no. 9.7.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Page No.59 Item no 9.7.1 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1335.6 1335.6 76.85 False None None False None False 102640.86 0 2592941 80724 None PWD UNI SR 23-24 Vol-2 Item no. 9.7.2 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile coarse sand) with Acid and alkali resistant tile Page No.60 Item no 9.7.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1335.6 1335.6 260.61 False None None False None False 348070.716 0 2592942 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.43.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.34.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 53.0 53.0 30.0 False None None False None False 1590.0 0 2592943 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.33.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 147.34 147.34 30.0 False None None False None False 4420.2 0 2592944 80724 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.33.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 146.28 146.28 36.0 False None None False None False 5266.08 0 2592945 80724 None PWD Uni Sr 23-24 Vol-2 Item no. 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.32 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 165.36 165.36 891.61 False None None False None False 147436.6296 0 2592946 80724 None PWD Uni Sr 23-24 Vol-2 Item no. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.31 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 188.68 188.68 215.94 False None None False None False 40743.5592 0 2592947 80724 None PWD Uni Sr 23-24 Vol-1 Item no. 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Page No.18 Item no. 2.11a KPWD. Volumn -1 KPWD SR 2023-24, . Tonne 94824.42 94824.42 8.6 False None None False None False 815490.012 0 1707915040000 0 None None Buildings Second Floor - Civil 4491257.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2592948 80725 None PWD UNI SR 23-24 Vol-1 Item no. 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.5.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 7322.01 7322.01 66.08 False None None False None False 483838.4208 0 2592949 80725 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Cum 5125.41 5125.41 8.4 False None None False None False 43053.444 0 2592950 80725 None 112 BEAMS & lintels CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 14.Volumn -1 KPWD SR 2023-24, . Lintel beam rcc Qty Cum 4393.21 4393.21 14.45 False None None False None False 63481.8845 0 2592951 80725 None 112 ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, . roof slab rcc & STAIRCASE Qty Cum 3661.01 3661.01 41.81 False None None False None False 153066.8281 0 2592952 80725 None 112 CHAJJA CENTRING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.112 Sl.no.19 KPWD. Volumn -1 KPWD SR 2023-24, . CHAJJA Qty Cum 3291.9 3291.9 1.44 False None None False None False 4740.336 0 2592953 80725 None PWD UNI SR 23-24 Vol-2 Item no. 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 13 Item.no 6.7 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 8785.77 8785.77 78.28 False None None False None False 687750.0756 0 2592954 80725 None PWD UNI SR 23-24 Vol-2 Item no. 6.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 14 Item.no 6.14 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1134.2 1134.2 28.2 False None None False None False 31984.44 0 2592955 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Page No.43 Item no.8.10 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 225.77 225.77 228.55 False None None False None False 51599.7335 0 2592956 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials curing complete as per specifications and as per directions Page No.42 Item no.8.6.1 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 411.95 411.95 645.06 False None None False None False 265732.467 0 2592957 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.5.1 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing Page No.42 Item no.8.5.1 KPWD. Volumn -2 KPWD SR 2023-24, Sqm 391.62 391.62 215.94 False None None False None False 84566.4228 0 2592958 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Page No.50 Item no.8.51 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 107.0 107.0 873.61 False None None False None False 93476.27 0 2592959 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.2 Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. Page No.99 Item no. 12.2 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 130966.93 130966.93 0.67 False None None False None False 87747.8431 0 2592960 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.20 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Page No.100 Item no. 12.20 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 6580.5 6580.5 18.0 False None None False None False 118449.0 0 2592961 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications Page No.105 Item no. 12.51 KPWD. Volumn -2 KPWD SR 2023-24, . No 1580.39 1580.39 6.0 False None None False None False 9482.34 0 2592962 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately Size 62 x 125mm Page No.111 Item no. 12.93.2 KPWD. Volumn -2 KPWD SR 2023-24 m 817.48 817.48 85.5 False None None False None False 69894.54 0 2592963 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.94.2 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately 35 mm thickness Page No.112 Item no. 12.94.2 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 4323.87 4323.87 22.05 False None None False None False 95341.3335 0 2592964 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm . Page No.107 Item no. 12.74.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 109.14 109.14 57.0 False None None False None False 6220.98 0 2592965 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm Page No.107 Item no. 12.76.2 KPWD. Volumn -2 KPWD SR 2023-24, . No 374.5 374.5 19.0 False None None False None False 7115.5 0 2592966 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.79.1 Providing and fixing bright finished brass handles with screws etc. complete: Page No.108 Item no. 12.79.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 266.43 266.43 19.0 False None None False None False 5062.17 0 2592967 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.90 Providing & fixing of 3 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum iO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall Sqm 7205.38 7205.38 25.2 False None None False None False 181575.576 0 2592968 80725 None PWD UNI SR 23-24 Vol-2 Item no. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame havinoverall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Page No. 109 Item no. 12.85 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 6119.33 6119.33 4.8 False None None False None False 29372.784 0 2592969 80725 None PWD UNI SR 23-24 Vol-2 Item no. 11.34.A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Page No. 86 Item no. 11.34A KPWD. Volumn -2 KPWD SR 2023-24, . Kg 179.76 179.76 630.0 False None None False None False 113248.8 0 2592970 80725 None PWD UNI SR 23-24 Vol-2 Item no. 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval ofEngineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Page No.85 Item no.11.28 KPWD. Volumn -2 KPWD SR 2023-24 Kg 604.55 604.55 84.0 False None None False None False 50782.2 0 2592971 80725 None PWD Uni SR 23-24 vol-9.22.2 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by thE manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Page No.62 Item no.9.22.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1418.82 1418.82 161.88 False None None False None False 229678.5816 0 2592972 80725 None PWD UNI SR 23-24 Vol-2 Item no. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. .Page No.63 Item no.9.24 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 3051.64 3051.64 52.84 False None None False None False 161248.6576 0 2592973 80725 None PWD UNI SR 23-24 Vol-2 Item no. 9.7.1 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Page No.59 Item no 9.7.1 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1348.2 1348.2 38.43 False None None False None False 51811.326 0 2592974 80725 None PWD UNI SR 23-24 Vol-2 Item no. 9.7.2 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile coarse sand) with Acid and alkali resistant tile Page No.60 Item no 9.7.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1348.2 1348.2 218.93 False None None False None False 295161.426 0 2592975 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.43.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.34.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 53.5 53.5 30.0 False None None False None False 1605.0 0 2592976 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.33.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 148.73 148.73 30.0 False None None False None False 4461.9 0 2592977 80725 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.33.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 147.66 147.66 36.0 False None None False None False 5315.76 0 2592978 80725 None PWD Uni Sr 23-24 Vol-2 Item no. 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.32 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 166.92 166.92 873.61 False None None False None False 145822.9812 0 2592979 80725 None PWD Uni Sr 23-24 Vol-2 Item no. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.31 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 190.46 190.46 215.94 False None None False None False 41127.9324 0 2592980 80725 None PWD Uni Sr 23-24 Vol-1 Item no. 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Page No.18 Item no. 2.11a KPWD. Volumn -1 KPWD SR 2023-24, . Tonne 95718.99 95718.99 8.54 False None None False None False 817440.1746 0 1707915040000 0 None None Buildings Terrace Floor - Civil 751383.59 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2592981 80726 None PWD UNI SR 23-24 Vol-1 Item no. 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.5.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 7390.44 7390.44 5.04 False None None False None False 37247.8176 0 2592982 80726 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Cum 5173.31 5173.31 3.04 False None None False None False 15726.8624 0 2592983 80726 None 112 ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, . roof slab rcc & STAIRCASE Qty Cum 3695.22 3695.22 1.99 False None None False None False 7353.4878 0 2592984 80726 None PWD UNI SR 23-24 Vol-2 Item no. 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 13 Item.no 6.7 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 8867.88 8867.88 24.52 False None None False None False 217440.4176 0 2592985 80726 None PWD UNI SR 23-24 Vol-2 Item no. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Page No.43 Item no.8.10 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 227.88 227.88 15.9 False None None False None False 3623.292 0 2592986 80726 None PWD UNI SR 23-24 Vol-2 Item no. 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials curing complete as per specifications and as per directions Page No.42 Item no.8.6.1 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 415.8 415.8 32.34 False None None False None False 13446.972 0 2592987 80726 None PWD UNI SR 23-24 Vol-2 Item no. 8.5.1 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing Page No.42 Item no.8.5.1 KPWD. Volumn -2 KPWD SR 2023-24, Sqm 395.28 395.28 227.51 False None None False None False 89930.1528 0 2592988 80726 None PWD UNI SR 23-24 Vol-2 Item no. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Page No.50 Item no.8.51 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 108.0 108.0 48.24 False None None False None False 5209.92 0 2592989 80726 None PWD UNI SR 23-24 Vol-2 Item no. 12.2 Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. Page No.99 Item no. 12.2 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 132190.92 132190.92 0.09 False None None False None False 11897.1828 0 2592990 80726 None PWD UNI SR 23-24 Vol-2 Item no. 12.20 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Page No.100 Item no. 12.20 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 6642.0 6642.0 2.52 False None None False None False 16737.84 0 2592991 80726 None PWD UNI SR 23-24 Vol-2 Item no. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications Page No.105 Item no. 12.51 KPWD. Volumn -2 KPWD SR 2023-24, . No 1595.16 1595.16 1.0 False None None False None False 1595.16 0 2592992 80726 None PWD UNI SR 23-24 Vol-2 Item no. 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm . Page No.107 Item no. 12.74.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 110.16 110.16 6.0 False None None False None False 660.96 0 2592993 80726 None PWD UNI SR 23-24 Vol-2 Item no. 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm Page No.107 Item no. 12.76.2 KPWD. Volumn -2 KPWD SR 2023-24, . No 378.0 378.0 2.0 False None None False None False 756.0 0 2592994 80726 None PWD UNI SR 23-24 Vol-2 Item no. 12.79.1 Providing and fixing bright finished brass handles with screws etc. complete: Page No.108 Item no. 12.79.1 KPWD. Volumn -2 KPWD SR 2023-24, . No 268.92 268.92 2.0 False None None False None False 537.84 0 2592995 80726 None PWD UNI SR 23-24 Vol-2 Item no. 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.33.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 149.04 149.04 5.04 False None None False None False 751.1616 0 2592996 80726 None PWD Uni Sr 23-24 Vol-2 Item no. 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.32 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 168.48 168.48 48.24 False None None False None False 8127.4752 0 2592997 80726 None PWD Uni Sr 23-24 Vol-2 Item no. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.31 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 192.24 192.24 227.51 False None None False None False 43736.5224 0 2592998 80726 None PWD Uni Sr 23-24 Vol-1 Item no. 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Page No.18 Item no. 2.11a KPWD. Volumn -1 KPWD SR 2023-24, . Tonne 96613.56 96613.56 0.43 False None None False None False 41543.8308 0 2592999 80726 None PWD Uni Sr 23-24 Vol-2 Item no. 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400 and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer 150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Page No. 149 Item no. 15.1 KPWD. Volumn -2 KPWD SR 2023-24 Sqm 882.36 882.36 266.4 False None None False None False 235060.704 0 1707915040000 0 None None Buildings Water Supply - Ground Gloor 606169.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593000 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.33.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes Itm.no 13.33.4, Pg.no.122 Volume-2 KPWD SR-2023-24 32mm dia pipe from Borewell to Tanks Mtr 390.6 390.6 150.0 False None None False None False 58590.0 0 2593001 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes Itm.no 13.33.3, Pg.no.122 Volume-2 KPWD SR-2023-24 Mtr 310.8 310.8 50.0 False None None False None False 15540.0 0 2593002 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes Itm.no 13.32.1, Pg.no. 122 Volume-2 KPWD SR-2023-24 Mtr 324.45 324.45 70.0 False None None False None False 22711.5 0 2593003 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.55.B PProviding and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium . item no 14.55 B page no 139 Volume-2 KPWD SR-2023-24 CP Brass Bib cock No 2547.3 2547.3 10.0 False None None False None False 25473.0 0 2593004 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ( item no 13.16 ) page no 117 Volume-2 KPWD SR-2023-24 CP Brass Bib cock No 3009.3 3009.3 4.0 False None None False None False 12037.2 0 2593005 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ( item no 13.15 ) page no 117 Volume-2 KPWD SR-2023-24 IN TOILET ROOMS No 761.25 761.25 2.0 False None None False None False 1522.5 0 2593006 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.22.B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ( item no 14.22B ) page no 135 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 5840.1 5840.1 4.0 False None None False None False 23360.4 0 2593007 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ( item no 14.40.2 ) page no 137 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 520.8 520.8 4.0 False None None False None False 2083.2 0 2593008 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.26 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g ( item no 13.26 ) page no 121 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 105.0 105.0 4.0 False None None False None False 420.0 0 2593009 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer ( item no 14.7.3 ) page no 132 Volume-2 KPWD SR-2023-24 hand wash Unit 3009.3 3009.3 3.0 False None None False None False 9027.9 0 2593010 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.8.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length ( item no 13.8.2.1 ) page no 116 Volume-2 KPWD SR-2023-24 Wash Basins Unit 95.55 95.55 3.0 False None None False None False 286.65 0 2593011 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved qualit complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ( item no 14.31 ) page no 136 Volume-2 KPWD SR-2023-24 IN TOILETS Unit 1281.0 1281.0 3.0 False None None False None False 3843.0 0 2593012 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings an fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ( item no 14.1.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 5128.2 5128.2 1.0 False None None False None False 5128.2 0 2593013 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( item no 14.3.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 6275.85 6275.85 2.0 False None None False None False 12551.7 0 2593014 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( item no 14.4.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 4676.7 4676.7 4.0 False None None False None False 18706.8 0 2593015 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 10.8 Providing and fixing granite stone slab with table rubbed, edges roundedand polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ( item no 10.8 ) page no 70 Volume-2 KPWD SR-2023-24 Partition 3no ( 0.60 X 1.20M X 5NO.) Sqm 2928.45 2928.45 3.6 False None None False None False 10542.42 0 2593016 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 14.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 136 Volume-2 KPWD SR-2023-24 hand wash Each 96.6 96.6 7.0 False None None False None False 676.2 0 2593017 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 1.15.1 Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.8 Item No. 1.15.1 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 381.15 381.15 148.05 False None None False None False 56429.2575 0 2593018 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.55 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc.omplete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay (non modular) bricks of class designation 3.5 Page No. 127 Item.no 13.55 KPWD. Volumn -2 KPWD SR 2023-24 Each 7771.05 7771.05 10.0 False None None False None False 77710.5 0 2593019 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.52 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5 Page No.126 Item No.13.52 VOLUME -2 KPWD SR 2023-24 No 11094.3 11094.3 2.0 False None None False None False 22188.6 0 2593020 80727 None PWD Uni Sr 23-24 Vol-5 Item no. 10.3.8 Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN8 Self Fit - 200mm dia. ( item no 10.3.8) page no 115 VOLUME-5 KPWD SR-2023-24 Mtr 934.5 934.5 200.0 False None None False None False 186900.0 0 2593021 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes item no 13.64.1 page no 128 Volume-2 KPWD SR-2023-24 Mtr 303.45 303.45 60.0 False None None False None False 18207.0 0 2593022 80727 None PWD Uni Sr 23-24 Vol-2 Item no. 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes item no 13.64.2 page no 128 Volume-2 KPWD SR-2023-24 Mtr 404.25 404.25 55.0 False None None False None False 22233.75 0 1707915040000 0 None None Buildings Water Supply - First Floor 407656.71 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593023 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes Itm.no 13.33.3, Pg.no.122 Volume-2 KPWD SR-2023-24 Mtr 313.76 313.76 100.0 False None None False None False 31376.0 0 2593024 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes Itm.no 13.32.1, Pg.no. 122 Volume-2 KPWD SR-2023-24 Mtr 327.54 327.54 140.0 False None None False None False 45855.6 0 2593025 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.55.B PProviding and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium . item no 14.55 B page no 139 Volume-2 KPWD SR-2023-24 CP Brass Bib cock No 2571.56 2571.56 20.0 False None None False None False 51431.2 0 2593026 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ( item no 13.16 ) page no 117 Volume-2 KPWD SR-2023-24 CP Brass Bib cock No 3037.96 3037.96 8.0 False None None False None False 24303.68 0 2593027 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ( item no 13.15 ) page no 117 Volume-2 KPWD SR-2023-24 IN TOILET ROOMS No 768.5 768.5 4.0 False None None False None False 3074.0 0 2593028 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.22.B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ( item no 14.22B ) page no 135 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 5895.72 5895.72 8.0 False None None False None False 47165.76 0 2593029 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ( item no 14.40.2 ) page no 137 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 525.76 525.76 8.0 False None None False None False 4206.08 0 2593030 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.26 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g ( item no 13.26 ) page no 121 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 106.0 106.0 8.0 False None None False None False 848.0 0 2593031 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer ( item no 14.7.3 ) page no 132 Volume-2 KPWD SR-2023-24 hand wash Unit 3037.96 3037.96 6.0 False None None False None False 18227.76 0 2593032 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.8.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length ( item no 13.8.2.1 ) page no 116 Volume-2 KPWD SR-2023-24 Wash Basins Unit 96.46 96.46 6.0 False None None False None False 578.76 0 2593033 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved qualit complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ( item no 14.31 ) page no 136 Volume-2 KPWD SR-2023-24 IN TOILETS Unit 1293.2 1293.2 6.0 False None None False None False 7759.2 0 2593034 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings an fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ( item no 14.1.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 5177.04 5177.04 2.0 False None None False None False 10354.08 0 2593035 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( item no 14.3.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 6335.62 6335.62 4.0 False None None False None False 25342.48 0 2593036 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( item no 14.4.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 4721.24 4721.24 4.0 False None None False None False 18884.96 0 2593037 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 10.8 Providing and fixing granite stone slab with table rubbed, edges roundedand polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ( item no 10.8 ) page no 70 Volume-2 KPWD SR-2023-24 Partition 3no ( 0.60 X 1.20M X 5NO.) Sqm 2956.34 2956.34 7.2 False None None False None False 21285.648 0 2593038 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 14.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 136 Volume-2 KPWD SR-2023-24 hand wash Each 97.52 97.52 10.0 False None None False None False 975.2 0 2593039 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes item no 13.64.1 page no 128 Volume-2 KPWD SR-2023-24 Mtr 306.34 306.34 120.0 False None None False None False 36760.8 0 2593040 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes item no 13.64.2 page no 128 Volume-2 KPWD SR-2023-24 Mtr 408.1 408.1 75.0 False None None False None False 30607.5 0 2593041 80728 None PWD Uni Sr 23-24 Vol-2 Item no. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. item no 13.34 page no 123 Volume-2 KPWD SR-2023-24 3000 L TANK Ltr 9.54 9.54 3000.0 False None None False None False 28620.0 0 1707915040000 0 None None Buildings Water Supply - Second Floor 411502.53 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593042 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes Itm.no 13.33.3, Pg.no.122 Volume-2 KPWD SR-2023-24 Mtr 316.72 316.72 100.0 False None None False None False 31672.0 0 2593043 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes Itm.no 13.32.1, Pg.no. 122 Volume-2 KPWD SR-2023-24 Mtr 330.63 330.63 140.0 False None None False None False 46288.2 0 2593044 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.55.B PProviding and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium . item no 14.55 B page no 139 Volume-2 KPWD SR-2023-24 CP Brass Bib cock No 2595.82 2595.82 20.0 False None None False None False 51916.4 0 2593045 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ( item no 13.16 ) page no 117 Volume-2 KPWD SR-2023-24 CP Brass Bib cock No 3066.62 3066.62 8.0 False None None False None False 24532.96 0 2593046 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ( item no 13.15 ) page no 117 Volume-2 KPWD SR-2023-24 IN TOILET ROOMS No 775.75 775.75 4.0 False None None False None False 3103.0 0 2593047 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.22.B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ( item no 14.22B ) page no 135 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 5951.34 5951.34 8.0 False None None False None False 47610.72 0 2593048 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ( item no 14.40.2 ) page no 137 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 530.72 530.72 8.0 False None None False None False 4245.76 0 2593049 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.26 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g ( item no 13.26 ) page no 121 Volume-2 KPWD SR-2023-24 IN BATH ROOMS No 107.0 107.0 8.0 False None None False None False 856.0 0 2593050 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer ( item no 14.7.3 ) page no 132 Volume-2 KPWD SR-2023-24 hand wash Unit 3066.62 3066.62 6.0 False None None False None False 18399.72 0 2593051 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.8.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length ( item no 13.8.2.1 ) page no 116 Volume-2 KPWD SR-2023-24 Wash Basins Unit 97.37 97.37 6.0 False None None False None False 584.22 0 2593052 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved qualit complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ( item no 14.31 ) page no 136 Volume-2 KPWD SR-2023-24 IN TOILETS Unit 1305.4 1305.4 6.0 False None None False None False 7832.4 0 2593053 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings an fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ( item no 14.1.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 5225.88 5225.88 2.0 False None None False None False 10451.76 0 2593054 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( item no 14.3.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 6395.39 6395.39 4.0 False None None False None False 25581.56 0 2593055 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( item no 14.4.1 ) page no 131 Volume-2 KPWD SR-2023-24 Pan 4765.78 4765.78 4.0 False None None False None False 19063.12 0 2593056 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 10.8 Providing and fixing granite stone slab with table rubbed, edges roundedand polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ( item no 10.8 ) page no 70 Volume-2 KPWD SR-2023-24 Partition 3no ( 0.60 X 1.20M X 5NO.) Sqm 2984.23 2984.23 7.2 False None None False None False 21486.456 0 2593057 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 14.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia ( item no 14.28.2.1 ) page no 136 Volume-2 KPWD SR-2023-24 hand wash Each 98.44 98.44 10.0 False None None False None False 984.4 0 2593058 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes item no 13.64.1 page no 128 Volume-2 KPWD SR-2023-24 Mtr 309.23 309.23 120.0 False None None False None False 37107.6 0 2593059 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.64.2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes item no 13.64.2 page no 128 Volume-2 KPWD SR-2023-24 Mtr 411.95 411.95 75.0 False None None False None False 30896.25 0 2593060 80729 None PWD Uni Sr 23-24 Vol-2 Item no. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. item no 13.34 page no 123 Volume-2 KPWD SR-2023-24 3000 L TANK Ltr 9.63 9.63 3000.0 False None None False None False 28890.0 0 1707915040000 0 None None Buildings Septic Tank & Sump Tank 332946.84 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593061 80730 None PWD Uni Sr 23-24 Vol-1 Item no. 1.15.1 Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.8 Item No. 1.15.1 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 381.15 381.15 40.1 False None None False None False 15284.115 0 2593062 80730 None PWD Uni Sr 23-24 Vol-1 Item no. 1.15.2 Earth work excavation Depth exceeding 1.5 m, but not exceeding 3 m for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m Page No.9 Item No. 1.15.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 446.25 446.25 8.02 False None None False None False 3578.925 0 2593063 80730 None PWD Uni Sr 23-24 Vol-2 Item no. 4.1 KSRB-3.2: Providing and injecting chemical emulsion for Pre- constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. (Plinth area of the building at ground floor only shall be measured ) Page No.5 Item No. 4.1 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 123.9 123.9 26.73 False None None False None False 3311.847 0 2593064 80730 None PWD Uni Sr 23-24 Vol-1 Item no. 2.1.4 Providing and laying in position plain cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Page No.15 Item No. 2.1.4 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 6527.85 6527.85 5.35 False None None False None False 34923.9975 0 2593065 80730 None PWD Uni Sr 23-24 Vol-1 Item no. 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.5.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 7185.15 7185.15 3.38 False None None False None False 24285.807 0 2593066 80730 None 112 ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, . Cum 3592.58 3592.58 3.38 False None None False None False 12142.9204 0 2593067 80730 None PWD Uni Sr 23-24 Vol-2 Item no. 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 13 Item.no 6.7 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 8621.55 8621.55 11.4 False None None False None False 98285.67 0 2593068 80730 None PWD Uni Sr 23-24 Vol-2 Item no. 6.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Page No. 14 Item.no 6.14 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 1113.0 1113.0 10.68 False None None False None False 11886.84 0 2593069 80730 None PWD Uni Sr 23-24 Vol-2 Item no. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Page No.43 Item no.8.10 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 221.55 221.55 19.74 False None None False None False 4373.397 0 2593070 80730 None PWD Uni Sr 23-24 Vol-2 Item no. 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Page No.42 Item no.8.9 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 404.25 404.25 125.95 False None None False None False 50915.2875 0 2593071 80730 None PWD Uni Sr 23-24 Vol-1 Item no. 2.11.A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Page No.18 Item no. 2.11a KPWD. Volumn -1 KPWD SR 2023-24, . Tonne 93929.85 93929.85 0.53 False None None False None False 49782.8205 0 2593072 80730 None PWD Uni Sr 23-24 Vol-2 Item no. 13.56 Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay (non modular) bricks of class designation 3.5 Page No. 127 Item no. 13.56 KPWD. Volumn -2 KPWD SR 2023-24 Each 24175.2 24175.2 1.0 False None None False None False 24175.2 0 1707915040000 0 None None Buildings Borewell 229473.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593073 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 12.4 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. PG.NO 151 ITM.NO 4, VOLUME-5 KPWD 2021-22 Each 5552.4 5552.4 1.0 False None None False None False 5552.4 0 2593074 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 12.1.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) Borewell depth of 0 to 50 m PG.NO 139 ITM.NO 12.1.1 , VOLUME-5 KPWD SR 2023-24 Mtr 388.5 388.5 50.0 False None None False None False 19425.0 0 2593075 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 12.1.2 Borewell depth of 50 to 100 m PG.NO 139 ITM.NO 12.1.2 VOLUME-5 KPWD SR 2023-24 Mtr 487.2 487.2 50.0 False None None False None False 24360.0 0 2593076 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 12.1.3 Borewell depth of 100 to 50 m PG.NO 139 ITM.NO 12.1.3 VOLUME-5 KPWD SR 2023-24 Mtr 517.65 517.65 20.0 False None None False None False 10353.0 0 2593077 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 12.32 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty PG.NO 143 ITM.NO 12.32 , VOLUME-5 KPWD SR 2023-24 Mtr 2029.65 2029.65 6.0 False None None False None False 12177.9 0 2593078 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 1.8 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PG.NO 134 ITM.NO 1.8 , VOLUME-5 KPWD 2021-22 Mtr 595.35 595.35 120.0 False None None False None False 71442.0 0 2593079 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 1.1 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : PG.NO 121 ITM.NO 1 , VOLUME-5 KPWD 2021-22 Mtr 150.15 150.15 120.0 False None None False None False 18018.0 0 2593080 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 13.6 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00” PG.NO 160 ITM.NO 13.6 , VOLUME-5 KPWD 2021-22 Each 37747.5 37747.5 1.0 False None None False None False 37747.5 0 2593081 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 22.2 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 m2 PG.NO 161 ITM.NO 22.2 , VOLUME-5 KPWD 2021-22 Mtr 102.9 102.9 145.0 False None None False None False 14920.5 0 2593082 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 29.1 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter 29.1 PG.NO 162 ITM.NO 29.1 , VOLUME-5 KPWD 2021-22 No 9975.0 9975.0 1.0 False None None False None False 9975.0 0 2593083 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 45 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. PG.NO 164 ITM.NO 45 , VOLUME-5 KPWD 2021-22 Job 3937.5 3937.5 1.0 False None None False None False 3937.5 0 2593084 80731 None PWD Uni Sr 23-24 Vol-5 Item no. 28.2 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm PG.NO 162 ITM.NO 28.2 , VOLUME-5 KPWD 2021-22 Each 1564.5 1564.5 1.0 False None None False None False 1564.5 0 1707915040000 0 None None Buildings Compound wall 1175647.97 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593085 80732 None PWD Uni Sr 23-24 Vol-1 Item no. 1.15.1 Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Page No.8 Item No. 1.15.1 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 381.15 381.15 79.74 False None None False None False 30392.901 0 2593086 80732 None PWD Uni Sr 23-24 Vol-1 Item no. 2.1.4 Providing and laying in position plain cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Page No.15 Item No. 2.1.4 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 6527.85 6527.85 15.13 False None None False None False 98766.3705 0 2593087 80732 None PWD Uni Sr 23-24 Vol-1 Item no. 2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.4.3 KPWD. Volumn -1 KPWD SR 2023-24 Cum 6652.8 6652.8 1.37 False None None False None False 9114.336 0 2593088 80732 None PWD Uni Sr 23-24 Vol-1 Item no. 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Page No.16 Item No. 2.5.2 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 7185.15 7185.15 0.61 False None None False None False 4382.9415 0 2593089 80732 None 111 FOOTING CENTERING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Volumn -1 KPWD SR 2023-24, . Cum 532.22 532.22 1.09 False None None False None False 580.1198 0 2593090 80732 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Columns rcc Qty Sub Structure Cum 4656.96 4656.96 0.28 False None None False None False 1303.9488 0 2593091 80732 None 111 COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, . Columns rcc Qty Super Structure Cum 5029.61 5029.61 0.61 False None None False None False 3068.0621 0 2593092 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 5.5 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM1:6 : Page No.9 Item No. 5.5 KPWD. Volumn -2 DSR 2023-24 Cum 6692.7 6692.7 65.36 False None None False None False 437434.872 0 2593093 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 5.6 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM1:6 : Page No.9 Item No. 5.6 KPWD. Volumn -2 DSR 2023-24 Cum 6770.4 6770.4 28.66 False None None False None False 194039.664 0 2593094 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 5.7 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6 Page No. 9 Item.no 5.7 KPWD. Volumn -2 KPWD SR 2023-24, . Cum 7092.75 7092.75 24.07 False None None False None False 170722.4925 0 2593095 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 8.17.2 Providing Raised and cut pointing: Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge Page No.44 Item no.8.17.2 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 294.0 294.0 304.3 False None None False None False 89464.2 0 2593096 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. Page No. 84 Item no. 11.25.2 KPWD. Volumn -2 KPWD SR 2023-24 Kg 142.8 142.8 159.39 False None None False None False 22760.892 0 2593097 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.34.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 52.5 52.5 191.27 False None None False None False 10041.675 0 2593098 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.47 Item no 8.33.3 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 145.95 145.95 191.27 False None None False None False 27915.8565 0 2593099 80732 None PWD Uni Sr 23-24 Vol-2 Item no. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Page No.46 Item no 8.31 KPWD. Volumn -2 KPWD SR 2023-24, . Sqm 186.9 186.9 304.3 False None None False None False 56873.67 0 2593100 80732 None PWD Uni Sr 23-24 Vol-1 Item no. 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Page No.18 Item no. 2.11a KPWD. Volumn -1 KPWD SR 2023-24, . Tonne 93929.85 93929.85 0.2 False None None False None False 18785.97 0 1707915040000 0 None None Buildings Electrification work 1898490.15 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593101 80733 None Item no. 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 19/20mm die 2mm thick Mtr 61.0 61.0 690.0 False None None False None False 42090.0 0 2593102 80733 None Item no. 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) - a) 25 mm dia 2 mm thick Mtr 70.0 70.0 600.0 False None None False None False 42000.0 0 2593103 80733 None Item no. 1.3.1 Supplying heavy gauge PVC conduit pipe .mm dia.mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick Mtr 75.0 75.0 300.0 False None None False None False 22500.0 0 2593104 80733 None Item no. 1.3.2 Supplying heavy gauge PVC conduit pipe .mm dia.mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick Mtr 80.0 80.0 150.0 False None None False None False 12000.0 0 2593105 80733 None Item no. 1.12 Supplying and fixing metal fan box with round hook Each 163.0 163.0 22.5 False None None False None False 3667.5 0 2593106 80733 None Item no. 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments)without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet short Point Point 251.0 251.0 9.0 False None None False None False 2259.0 0 2593107 80733 None Item no. 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 3 Mtr up to 6Mtr from tapping point to out let via switch Point 361.0 361.0 30.0 False None None False None False 10830.0 0 2593108 80733 None 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. t. Group - A. Long point a above 6 Mtr up to 10Mtr from tapping point to out let via switch Point 542.0 542.0 45.0 False None None False None False 24390.0 0 2593109 80733 None 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:1990 & confirming to GTP of Group - A.1.0sqmm. Mtr 26.0 26.0 450.0 False None None False None False 11700.0 0 2593110 80733 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:1990 & confirming to GTP of Group - A.2.5sqmm. Mtr 40.0 40.0 1650.0 False None None False None False 66000.0 0 2593111 80733 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:1990 & confirming to GTP of Group - A.4.0sqmm. Mtr 87.0 87.0 1200.0 False None None False None False 104400.0 0 2593112 80733 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1-3Way Each 123.0 123.0 18.0 False None None False None False 2214.0 0 2593113 80733 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5Way Each 138.0 138.0 3.0 False None None False None False 414.0 0 2593114 80733 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way Each 212.0 212.0 6.0 False None None False None False 1272.0 0 2593115 80733 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8Way Each 250.0 250.0 18.0 False None None False None False 4500.0 0 2593116 80733 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12Way Each 325.0 325.0 18.0 False None None False None False 5850.0 0 2593117 80733 None 3.6.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module Each 152.0 152.0 18.0 False None None False None False 2736.0 0 2593118 80733 None 3.6.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 175.0 175.0 3.0 False None None False None False 525.0 0 2593119 80733 None 3.6.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 244.0 244.0 6.0 False None None False None False 1464.0 0 2593120 80733 None 3.6.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 302.0 302.0 18.0 False None None False None False 5436.0 0 2593121 80733 None 3.6.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 12 Module Each 363.0 363.0 18.0 False None None False None False 6534.0 0 2593122 80733 None 3.6.1 concealed Conduit System Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied Each 88.0 88.0 180.0 False None None False None False 15840.0 0 2593123 80733 None 3.6.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Amps Two way Switch Each 152.0 152.0 18.0 False None None False None False 2736.0 0 2593124 80733 None 3.6.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Amps 3way socket Each 162.0 162.0 60.0 False None None False None False 9720.0 0 2593125 80733 None 3.6.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Stepped Fan Regulator. Each 313.0 313.0 22.5 False None None False None False 7042.5 0 2593126 80733 None 3.6.8 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16Amps one way switch Each 115.0 115.0 6.0 False None None False None False 690.0 0 2593127 80733 None 3.6.9 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Amps Bell push Each 96.0 96.0 30.0 False None None False None False 2880.0 0 2593128 80733 None 3.6.10 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 32Amps DP switch Each 375.0 375.0 3.0 False None None False None False 1125.0 0 2593129 80733 None 3.6.11 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6/16Amps universal socket Each 249.0 249.0 30.0 False None None False None False 7470.0 0 2593130 80733 None 13.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin No 106.0 106.0 18.0 False None None False None False 1908.0 0 2593131 80733 None 12.2 Supplying & fixing retrofit type -PL- LED Lamp .W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit rotection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 8-9 Watts Each 613.0 613.0 18.0 False None None False None False 11034.0 0 2593132 80733 None 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4- 20/22 w Each 740.0 740.0 18.0 False None None False None False 13320.0 0 2593133 80733 None 11.4.3 Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.15-18W Each 2174.0 2174.0 58.5 False None None False None False 127179.0 0 2593134 80733 None 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12 Sweep (300mm) Each 2997.0 2997.0 20.0 False None None False None False 59940.0 0 2593135 80733 None 7.4 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. Each 2085.0 2085.0 20.0 False None None False None False 41700.0 0 2593136 80733 None 5.13.2 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps Each 2126.0 2126.0 3.0 False None None False None False 6378.0 0 2593137 80733 None 5.14.7 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE 100Amps 25kA. Each 8265.0 8265.0 1.5 False None None False None False 12397.5 0 2593138 80733 None 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP Each 523.0 523.0 30.0 False None None False None False 15690.0 0 2593139 80733 None 5.17.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 608986-32 Amps DP Each 1103.0 1103.0 30.0 False None None False None False 33090.0 0 2593140 80733 None 5.17.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40 Amps TPN Each 2393.0 2393.0 5.0 False None None False None False 11965.0 0 2593141 80733 None 5.18.8 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 12Way SP &N Each 2067.0 2067.0 6.0 False None None False None False 12402.0 0 2593142 80733 None 5.19.10 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 63 Amps 4 pole Each 5039.0 5039.0 2.0 False None None False None False 10078.0 0 2593143 80733 None 5.20.4 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. 63 Amps 4 pole Each 3058.0 3058.0 3.0 False None None False None False 9174.0 0 2593144 80733 None 5.42.2 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG Sq CM 0.38 0.38 150000.0 False None None False None False 57000.0 0 2593145 80733 None 5.39 Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect / disconnect banks, with automatic recognition or with standard programs. Each 19440.0 19440.0 1.5 False None None False None False 29160.0 0 2593146 80733 None 5.40.4 Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 600Amps 4x75x10mm Aluminium Strips Mtr 5054.0 5054.0 6.0 False None None False None False 30324.0 0 2593147 80733 None 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 8370.0 8370.0 1.5 False None None False None False 12555.0 0 2593148 80733 None 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. Each 505.0 505.0 4.5 False None None False None False 2272.5 0 2593149 80733 None 5.35 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 5125.0 5125.0 1.5 False None None False None False 7687.5 0 2593150 80733 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. Each 464.0 464.0 4.5 False None None False None False 2088.0 0 2593151 80733 None 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. Each 1280.0 1280.0 1.5 False None None False None False 1920.0 0 2593152 80733 None 5.26 Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter without CT Each 434.0 434.0 1.5 False None None False None False 651.0 0 2593153 80733 None 5.22 Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board. Each 407.0 407.0 1.5 False None None False None False 610.5 0 2593154 80733 None 5.41.2 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm Mtr 356.0 356.0 18.0 False None None False None False 6408.0 0 2593155 80733 None 5.45.3 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. TP & N 20Amps Each 1112.0 1112.0 3.0 False None None False None False 3336.0 0 2593156 80733 None 5.48 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 4352.0 4352.0 3.0 False None None False None False 13056.0 0 2593157 80733 None 32.14 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm)(From L.T.Distribution Box To Main Panel) Km 514040.0 514040.0 0.25 False None None False None False 128510.0 0 2593158 80733 None 31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 185sqmm to 240Sqmm Km 23647.0 23647.0 0.25 False None None False None False 5911.75 0 2593159 80733 None 29.02 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In soil (ordinary) cm 260.0 260.0 150.0 False None None False None False 39000.0 0 2593160 80733 None 29.18 Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand). Km 11570.0 11570.0 0.3 False None None False None False 3471.0 0 2593161 80733 None 49.08 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 100mm Mtr 1528.0 1528.0 13.5 False None None False None False 20628.0 0 2593162 80733 None 35.04 Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers et 225-300Sqmm Each 574.0 574.0 3.0 False None None False None False 1722.0 0 2593163 80733 None 6.11.7 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only 75mm dia Each 496.0 496.0 6.0 False None None False None False 2976.0 0 2593164 80733 None 6.1 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 2999.7 2999.7 12.0 False None None False None False 35996.4 0 2593165 80733 None 6.2 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts No 4150.0 4150.0 9.0 False None None False None False 37350.0 0 2593166 80733 None 6.3.1 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip Mtr 75.0 75.0 60.0 False None None False None False 4500.0 0 2593167 80733 None 6.18.1 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc 12 SWG GI Wire Mtr 14.0 14.0 18.0 False None None False None False 252.0 0 2593168 80733 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clamps. 13.7.1 On wall / ceiling / Rafter / Girders Each 119.0 119.0 46.0 False None None False None False 5474.0 0 2593169 80733 None 13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 281.0 281.0 20.0 False None None False None False 5620.0 0 2593170 80733 None 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 702.0 702.0 10.0 False None None False None False 7020.0 0 2593171 80733 None 9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.5 kVA ON LINE UPS Each 79172.0 79172.0 2.0 False None None False None False 158344.0 0 2593172 80733 None 9.4.5 Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.120 AH capacity Each 22135.0 22135.0 12.0 False None None False None False 265620.0 0 2593173 80733 None 1.1.2 Providing 2kg CO2 Gas Type Fire Extinugisher Squeeze Grip Type used Unused Mechanism Each 11097.0 11097.0 2.0 False None None False None False 22194.0 0 2593174 80733 None 67.2 Supplying and fixing of DANGER/NO ADMISSION/NO SMOKING board made out of MS sheet metal with two coats of non corrosive enameled paint Each 146.0 146.0 2.0 False None None False None False 292.0 0 2593175 80733 None item1 GESCOM deposit Rs 200000.0 200000.0 1.0 False None None False None False 200000.0 0 1707915040000 0 None None Buildings Solar Heater System 70784.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593176 80734 None 8.3.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes.SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding. 300 Liter capacity Each 70784.0 70784.0 1.0 False None None False None False 70784.0 0 1707915040000 0 None None Buildings CC Camera Installation 288089.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593177 80735 None Elec SR item no. 34.2 Fixed Camera Specifications Lens type Bi focal auto iris with 10x digital zoom Mode Day/Night Image size 720x486 (NTSC) Streaming High speed Weather Proof IP 66 compliant Network Protocol TCP/IP should be compliant of any other protocol required. Connectivity Cat 6 / Optical fibre Ethernet 10Base t/100Base TX(RJ45) Power source both self powered and externally powered Each 11987.0 11987.0 15.0 False None None False None False 179805.0 0 2593178 80735 None Elec SR 33.23 HMI Monitor : 29" For CCTV display Each 24684.0 24684.0 1.0 False None None False None False 24684.0 0 2593179 80735 None Elec SR 8.1 Supplying and drawing UTP-CAT 6E LAN cable Ground Floor 1 600.00 First Floor 1 500.00 Second Floor 1 500.00 Premises area 1 400.00 For mics 1 200.00 Mtr 38.0 38.0 2200.0 False None None False None False 83600.0 0 1707915040000 0 None None Buildings Furnitures 917723.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2593180 80736 None Gem rate GODREJ INTERIO Almirah Steel shelving cabinets or any equalent brand as per engineer in charge of the work Each 23319.0 23319.0 10.0 False None None False None False 233190.0 0 2593181 80736 None Gem rate GODREJ INTERIO Almirah Steel with Glass door or any equalent brand as per engineer in charge of the work Each 31618.0 31618.0 9.0 False None None False None False 284562.0 0 2593182 80736 None Gem rate GODREJ INTERIO 3 Seater Public Place Seating Chair of M S ERW tube with arm and backrest WITHOUT CUSHION Each 24998.43 24998.43 9.0 False None None False None False 224985.87 0 2593183 80736 None Gem rate Executive Table with One side pedestal unit Each 11200.0 11200.0 9.0 False None None False None False 100800.0 0 2593184 80736 None Gem rate SIHOOl M18 High Back Office Chair, Mesh Ergonomic Office Chair for Work from Home with Adjustable Lumbar Support & Headrest, Study Chair with Adjustment Armrest & Heavy Duty Metal Base (Black) or equalent brand Each 10598.0 10598.0 7.0 False None None False None False 74186.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1707915041000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1707915041000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1707915041000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1707915052000 0 None None ELIGIBILITY G.S.T. at the prevailing rates will be given separately. None 1707915077000 0 None None ELIGIBILITY The Tenderer shall furnish, as part of his tender, earnest money deposit in the amount as shown in column 4 of the Table of IFT for this particular work. Tenderer can pay the full EMD amount of Rs. 3,37,720/- through e-payment or the Earnest Money Deposit shall be in two parts. Part(1): Rs. 1,00,000/- by e-payment, Part-(2): Rs 2,37,720/- EMD shall be in favour of Executive Engineer, PWD, Bidar Division, Bidar, and may be in the form of Bankers Cheque/Demand Draft/Pay order in favour of Executive Engineer, PWD, Bidar Division, Bidar, payable at Bidar or cash or specified Small Savings Instruments pledged to the Executive Engineer, PWD, Bidar Division None 1707915087000 0 None None ELIGIBILITY Period for completion of this work is 09(Nine) months including Monsoon. None 1707915100000 0 None None ELIGIBILITY Part (2) Rs. 2,37,720/- EMD shall be in favour of Executive Engineer, PWD , Bidar Division, Bidar and may be in the form of Bankers Cheque/Demand Draft/Pay order in favour of Executive Engineer, PWD Divn. Bidar, payable at Bidar or cash or specified Small Savings Instruments pledged to the Executive Engineer, PWD.Division, Bidar or Bank Guarantee in the prescribed format obtained form any Nationaled / Scheduled Banks. None 1707915110000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 ,2019-20 ,2020-21 2021-22 and 2022-23 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs. 450.28 Lakhs/- Turnover certificate must have UDI number , otherwise it will not be considered for further bid evaluation. None 1707915120000 0 None None ELIGIBILITY Liquid Assets and/or availability of credit facilities of not less than Rs. 75.05 Lakhs Lakhs (Credit Lines/Letter of Credit/Certificates from the Banks for meeting the fund requirement etc. None 1707915138000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 ,2019-20 ,2020-21 2021-22 and 2022-23 (b) satisfactorily completed as prime contractor, at least one similar work such as Construction of Building such as of value not less than Rs 112.58 Lakhs/- None 1707915150000 1 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 ,2019-20 ,2020-21 2021-22 and 2022-23 (c) executed in any one year, the following minimum quantities of work 1.(1)Earth work excavation/embankment/shoulders: 703.98.00 cum (2) PCC/RCC: 288.56 Cum (3) BBM/SSM : 335.82 Cum (4) Plastering: 2598.00 Cum (5)Steel:26.85 Cum (6)Flooring:545.73 Sqm None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 ,2019-20 ,2020-21 2021-22 and 2022-23 (b) satisfactorily completed as prime contractor, at least one similar work such as Construction of Building such as of value not less than Rs 112.58 Lakhs/- Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 ,2019-20 ,2020-21 2021-22 and 2022-23 (c) executed in any one year, the following minimum quantities of work 1.(1)Earth work excavation/embankment/shoulders: 703.98.00 cum (2) PCC/RCC: 288.56 Cum (3) BBM/SSM : 335.82 Cum (4) Plastering: 2598.00 Cum (5)Steel:26.85 Cum (6)Flooring:545.73 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of existing commitments and ongoing works Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- List of existing commitments and ongoing works None None None None List of works for which tenders already submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 ,2019-20 ,2020-21 2021-22 and 2022-23 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs. 450.28 Lakhs/- Turnover certificate must have UDI number , otherwise it will not be considered for further bid evaluation. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid Assets and/or availability of credit facilities of not less than Rs. 75.05 Lakhs Lakhs (Credit Lines/Letter of Credit/Certificates from the Banks for meeting the fund requirement etc. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Line of Credit True Technical Bid Work done Certificate True Technical Bid Other Documents False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1708062338000 version 0 createdDate None modifiedDate None blockNumber Executive Engineer PWD Division Bidar street None city Bidar state Karnataka pin 585401
tenderRecallDTO	None