createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1707985044513 version 8 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 380000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 29-02-2024 16:00:00 tenderQueryClose 21-02-2024 14:30:00 technicalBidOpen 01-03-2024 16:00:01 publishedDate 16-02-2024 12:36:31 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 22-02-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Technical Assistant. splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843294 tenderSupplierList None
tenderSchedule	createdTs 1707985044540 version 18 createdDate None modifiedDate None tenderNumber EWHFWD/2023-24/BD/WORK_INDENT96 title Up-gradation of infrastructure facilities to the TLH at Chikkodi in Belagavi District,2)Construction of STP works to CHC at Ankali in Chikkodi taluk, Belagavi District.3)Up-gradation of infrastructure facilities to the TLH at Ramdurga in Belagavi District.(Pkg-14/2023-24) description Up-gradation of infrastructure facilities to the TLH at Chikkodi in Belagavi District,2)Construction of STP works to CHC at Ankali in Chikkodi taluk, Belagavi District.3)Up-gradation of infrastructure facilities to the TLH at Ramdurga in Belagavi District.(Pkg-14/2023-24) category WORKS categoryText Works ecv 25229688.21 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 25300000.0 groupOverheadTotal 0.0 fileNumber AEE/BGM/2023-24/01-133
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1707985045000 1 None None Buildings Up-gradation of infrastructure facilities to the TLH at Chikkodi in Belagavi District.(Slice-1) 12933298.21 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2601331 81144 None V-2 Item No 19.22.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge25 mm and up to 40 mm ---- etc., complete with all lead Sqm 89.93 89.93 1262.086 False None None False None False 113499.39398 0 2601332 81144 None V-2 Item No 2.4.1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 9340.1 9340.1 2.0 False None None False None False 18680.2 0 2601333 81144 None V-2 Item No 20.93 Cleaning Quadrangle chajjas including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable arrangement, hose pipe etc., compl ---- etc., complete with all lead Sqm 18.23 18.23 69.25 False None None False None False 1262.4275 0 2601334 81144 None V-2 Item No 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 309.92 309.92 1066.098 False None None False None False 330405.09216 0 2601335 81144 None V-2 Item No 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1391.63 1391.63 200.965 False None None False None False 279668.92295 0 2601336 81144 None V-2 Item No 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead Sqm 3466.32 3466.32 104.82 False None None False None False 363339.6624 0 2601337 81144 None V-2 Item No 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead Sqm 2997.17 2997.17 30.72 False None None False None False 92073.0624 0 2601338 81144 None V-2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1080.49 1080.49 166.075 False None None False None False 179442.37675 0 2601339 81144 None V-2 Item No 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1691.83 1691.83 1066.098 False None None False None False 1803656.57934 0 2601340 81144 None V-2 Item No 20.47 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge ---- etc., complete with all lead Each 365.83 365.83 5.0 False None None False None False 1829.15 0 2601341 81144 None V-2 Item No 8.57 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 15.8 15.8 3805.92 False None None False None False 60133.536 0 2601342 81144 None V-2 Item No 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 450.91 450.91 175.0 False None None False None False 78909.25 0 2601343 81144 None V-2 Item No 8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 99.66 99.66 3805.92 False None None False None False 379297.9872 0 2601344 81144 None V-2 Item No 8.75.1 Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 134.9 134.9 3000.95 False None None False None False 404828.155 0 2601345 81144 None V-2 Item No 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 167815.13 167815.13 0.45 False None None False None False 75516.8085 0 2601346 81144 None V-2 Item No 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial ---- etc., complete with all lead Sqm 4736.41 4736.41 12.6 False None None False None False 59678.766 0 2601347 81144 None V-2 Item No 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge.42x50 mm PVC Extruded section ---- etc., complete with all lead m 290.48 290.48 69.3 False None None False None False 20130.264 0 2601348 81144 None V-2 Item No 12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam ---- etc., complete with all lead Sqm 2875.63 2875.63 22.05 False None None False None False 63407.6415 0 2601349 81144 None V-2 Item No 7.64.1.2 Providing and fixing sheet covering over expansion joints with iron screwsas per design.200 mm wide ---- etc., complete with all lead m 881.16 881.16 7.8 False None None False None False 6873.048 0 2601350 81144 None V-2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead No 1234.84 1234.84 5.0 False None None False None False 6174.2 0 2601351 81144 None V-2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 686.7 686.7 34.5 False None None False None False 23691.15 0 2601352 81144 None V-2 Item No 12.69.2 12.69.20 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm ---- etc., complete with all lead No 295.34 295.34 80.0 False None None False None False 23627.2 0 2601353 81144 None V-2 Item No 444 Providing and fixing Hold fasts ---- etc., complete with all lead No 60.76 60.76 85.0 False None None False None False 5164.6 0 2601354 81144 None V-2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead No 288.04 288.04 40.0 False None None False None False 11521.6 0 2601355 81144 None V-2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead No 145.84 145.84 5.0 False None None False None False 729.2 0 2601356 81144 None V-2 Item No 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead No 1278.6 1278.6 5.0 False None None False None False 6393.0 0 2601357 81144 None V-2 Item No 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- etc., complete with all lead No 158.0 158.0 20.0 False None None False None False 3160.0 0 2601358 81144 None V-2 Item No 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead Each 7264.44 7264.44 12.0 False None None False None False 87173.28 0 2601359 81144 None V-2 Item No 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead Each 5936.01 5936.01 13.0 False None None False None False 77168.13 0 2601360 81144 None V-2 Item No 14.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- etc., complete with all lead Each 4998.94 4998.94 15.0 False None None False None False 74984.1 0 2601361 81144 None V-2 Item No 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in-charge. ---- etc., complete with all lead Each 984.47 984.47 15.0 False None None False None False 14767.05 0 2601362 81144 None V-2 Item No 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead Each 6760.05 6760.05 15.0 False None None False None False 101400.75 0 2601363 81144 None V-2 Item No 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead Each 57.12 57.12 15.0 False None None False None False 856.8 0 2601364 81144 None 18-19 SR Item No 12.113.2 Providing and fixing Cl Nahani trap of approved make conforming to lSI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).12.5mmx75mm ---- etc., complete with all lead Each 249.15 249.15 15.0 False None None False None False 3737.25 0 2601365 81144 None V-2 Item No 14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g ---- etc., complete with all lead Each 113.03 113.03 15.0 False None None False None False 1695.45 0 2601366 81144 None V-5 Item No 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 499.52 499.52 50.0 False None None False None False 24976.0 0 2601367 81144 None V-5 Item No 10.1.8 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for: PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 709.79 709.79 30.0 False None None False None False 21293.7 0 2601368 81144 None V-2 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia ---- etc., complete with all lead m 375.55 375.55 50.0 False None None False None False 18777.5 0 2601369 81144 None V-2 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia ---- etc., complete with all lead m 460.63 460.63 70.0 False None None False None False 32244.1 0 2601370 81144 None V-2 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm dia ---- etc., complete with all lead m 579.74 579.74 50.0 False None None False None False 28987.0 0 2601371 81144 None V-2 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia ---- etc., complete with all lead m 676.97 676.97 40.0 False None None False None False 27078.8 0 2601372 81144 None V-2 Item No 19.43.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes to the appropriate disposal area as per direction of Engineer-in-charge.15 mm to 40 mm nominal bore ---- etc., complete with all lead m 126.4 126.4 400.0 False None None False None False 50560.0 0 2601373 81144 None V-2 Item No 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.93 10.93 5000.0 False None None False None False 54650.0 0 2601374 81144 None V-5 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc., complete with all lead No 6628.79 6628.79 10.0 False None None False None False 66287.9 0 2601375 81144 None V-6 Item No 1.8.1 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 20 mm ---- etc., complete with all lead m 34.03 34.03 1250.0 False None None False None False 42537.5 0 2601376 81144 None V-6 Item No 1.8.2 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 25 mm ---- etc., complete with all lead m 42.53 42.53 1500.0 False None None False None False 63795.0 0 2601377 81144 None V-6 Item No 2.2.1 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch box ---- etc., complete with all lead Point 326.94 326.94 40.0 False None None False None False 13077.6 0 2601378 81144 None V-6 Item No 2.2.2 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3 mts upto 6mts from tapping point to outlet via switch box ---- etc., complete with all lead Point 460.63 460.63 45.0 False None None False None False 20728.35 0 2601379 81144 None V-6 Item No 2.2.3 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6 mts upto 10 mts from tapping point to outlet via switch box ---- etc., complete with all lead Point 674.54 674.54 30.0 False None None False None False 20236.2 0 2601380 81144 None V-6 Item No 2.2.4 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches ---- etc., complete with all lead Point 822.82 822.82 2.0 False None None False None False 1645.64 0 2601381 81144 None V-6 Item No 2.2.5 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches ---- etc., complete with all lead Point 1202.03 1202.03 2.0 False None None False None False 2404.06 0 2601382 81144 None V-6 Item No 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1 mm2 ---- etc., complete with all lead m 23.09 23.09 2800.0 False None None False None False 64652.0 0 2601383 81144 None V-6 Item No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 ---- etc., complete with all lead m 31.6 31.6 2200.0 False None None False None False 69520.0 0 2601384 81144 None V-6 Item No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 ---- etc., complete with all lead m 51.04 51.04 1600.0 False None None False None False 81664.0 0 2601385 81144 None V-6 Item No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 ---- etc., complete with all lead m 76.57 76.57 400.0 False None None False None False 30628.0 0 2601386 81144 None V-6 Item No 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 6 mm2 ---- etc., complete with all lead m 111.81 111.81 600.0 False None None False None False 67086.0 0 2601387 81144 None V-6 Item No 3.3.1 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 1-2 Way ---- etc., complete with all lead Each 125.18 125.18 12.0 False None None False None False 1502.16 0 2601388 81144 None V-6 Item No 3.3.2 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 3 Way ---- etc., complete with all lead Each 150.7 150.7 12.0 False None None False None False 1808.4 0 2601389 81144 None V-6 Item No 3.3.3 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way ---- etc., complete with all lead Each 166.5 166.5 10.0 False None None False None False 1665.0 0 2601390 81144 None V-6 Item No 3.3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 Way ---- etc., complete with all lead Each 210.26 210.26 10.0 False None None False None False 2102.6 0 2601391 81144 None V-6 Item No 3.3.5 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way ---- etc., complete with all lead Each 266.17 266.17 10.0 False None None False None False 2661.7 0 2601392 81144 None V-6 Item No 3.3.6 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10-12 Way ---- etc., complete with all lead Each 317.21 317.21 8.0 False None None False None False 2537.68 0 2601393 81144 None V-6 Item No 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 1 to 2Module ---- etc., complete with all lead Each 166.5 166.5 12.0 False None None False None False 1998.0 0 2601394 81144 None V-6 Item No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 3Module ---- etc., complete with all lead Each 195.67 195.67 12.0 False None None False None False 2348.04 0 2601395 81144 None V-6 Item No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 4 Module ---- etc., complete with all lead Each 212.69 212.69 10.0 False None None False None False 2126.9 0 2601396 81144 None V-6 Item No 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 6 Module ---- etc., complete with all lead Each 284.4 284.4 10.0 False None None False None False 2844.0 0 2601397 81144 None V-6 Item No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 8 Module ---- etc., complete with all lead Each 345.17 345.17 10.0 False None None False None False 3451.7 0 2601398 81144 None V-6 Item No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 10/12 Module ---- etc., complete with all lead Each 418.09 418.09 5.0 False None None False None False 2090.45 0 2601399 81144 None V-6 Item No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch ---- etc., complete with all lead Each 123.97 123.97 8.0 False None None False None False 991.76 0 2601400 81144 None V-6 Item No 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps two way switch ---- etc., complete with all lead Each 201.75 201.75 8.0 False None None False None False 1614.0 0 2601401 81144 None V-6 Item No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets ---- etc., complete with all lead Each 207.83 207.83 12.0 False None None False None False 2493.96 0 2601402 81144 None V-6 Item No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator's Two module ---- etc., complete with all lead Each 433.89 433.89 10.0 False None None False None False 4338.9 0 2601403 81144 None V-6 Item No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal sockets ---- etc., complete with all lead Each 286.83 286.83 12.0 False None None False None False 3441.96 0 2601404 81144 None V-6 Item No 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 Amps one way Switch ---- etc., complete with all lead Each 218.77 218.77 6.0 False None None False None False 1312.62 0 2601405 81144 None V-6 Item No 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 189.6 189.6 1.0 False None None False None False 189.6 0 2601406 81144 None V-6 Item No 3.14.1 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A SP Switch ---- etc., complete with all lead Each 66.84 66.84 12.0 False None None False None False 802.08 0 2601407 81144 None V-6 Item No 3.14.2 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Two Way Switch ---- etc., complete with all lead Each 85.07 85.07 15.0 False None None False None False 1276.05 0 2601408 81144 None V-6 Item No 3.14.3 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Way 5 Pin Socket ---- etc., complete with all lead Each 85.07 85.07 15.0 False None None False None False 1276.05 0 2601409 81144 None V-6 Item No 3.14.4 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Pin Top ---- etc., complete with all lead Each 105.73 105.73 12.0 False None None False None False 1268.76 0 2601410 81144 None V-6 Item No 3.14.5 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling Rose ---- etc., complete with all lead Each 94.8 94.8 12.0 False None None False None False 1137.6 0 2601411 81144 None V-6 Item No 3.14.6 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Pendant Holder ---- etc., complete with all lead Each 86.29 86.29 12.0 False None None False None False 1035.48 0 2601412 81144 None V-6 Item No 3.14.7 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Batten Holder ---- etc., complete with all lead Each 89.93 89.93 2.0 False None None False None False 179.86 0 2601413 81144 None V-6 Item No 3.14.8 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bell Push ---- etc., complete with all lead Each 85.07 85.07 10.0 False None None False None False 850.7 0 2601414 81144 None V-6 Item No 3.14.9 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bell Buzzer ---- etc., complete with all lead Each 158.0 158.0 12.0 False None None False None False 1896.0 0 2601415 81144 None V-6 Item No 3.14.10 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A SP Switch ---- etc., complete with all lead Each 159.21 159.21 4.0 False None None False None False 636.84 0 2601416 81144 None V-6 Item No 3.14.11 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Two Way Switch ---- etc., complete with all lead Each 177.44 177.44 12.0 False None None False None False 2129.28 0 2601417 81144 None V-6 Item No 3.14.12 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Three Way 5 Pin Socket ---- etc., complete with all lead Each 139.77 139.77 3.0 False None None False None False 419.31 0 2601418 81144 None V-6 Item No 3.14.13 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Three Pin Top ---- etc., complete with all lead Each 133.69 133.69 4.0 False None None False None False 534.76 0 2601419 81144 None V-6 Item No 3.14.14 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 32A Bakelite DP ---- etc., complete with all lead Each 281.97 281.97 4.0 False None None False None False 1127.88 0 2601420 81144 None V-6 Item No 3.14.15 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16/6A combined plug and socket with control switch ---- etc., complete with all lead Each 264.95 264.95 3.0 False None None False None False 794.85 0 2601421 81144 None V-6 Item No 3.14.16 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electronic stepped regulator. ---- etc., complete with all lead Each 341.52 341.52 3.0 False None None False None False 1024.56 0 2601422 81144 None V-6 Item No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP ---- etc., complete with all lead Each 504.39 504.39 10.0 False None None False None False 5043.9 0 2601423 81144 None V-6 Item No 5.18.2 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A SP ---- etc., complete with all lead Each 963.81 963.81 10.0 False None None False None False 9638.1 0 2601424 81144 None V-6 Item No 5.18.3 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A SP ---- etc., complete with all lead Each 985.68 985.68 10.0 False None None False None False 9856.8 0 2601425 81144 None V-6 Item No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP ---- etc., complete with all lead Each 898.18 898.18 10.0 False None None False None False 8981.8 0 2601426 81144 None V-6 Item No 5.18.5 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP ---- etc., complete with all lead Each 1288.32 1288.32 10.0 False None None False None False 12883.2 0 2601427 81144 None V-6 Item No 5.18.6 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A DP ---- etc., complete with all lead Each 1339.37 1339.37 10.0 False None None False None False 13393.7 0 2601428 81144 None V-6 Item No 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN ---- etc., complete with all lead Each 2086.84 2086.84 10.0 False None None False None False 20868.4 0 2601429 81144 None V-6 Item No 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A TPN ---- etc., complete with all lead Each 3699.67 3699.67 10.0 False None None False None False 36996.7 0 2601430 81144 None V-6 Item No 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN ---- etc., complete with all lead Each 3753.15 3753.15 10.0 False None None False None False 37531.5 0 2601431 81144 None V-6 Item No 5.19.1 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 4 Way SP & N ---- etc., complete with all lead Each 1508.31 1508.31 4.0 False None None False None False 6033.24 0 2601432 81144 None V-6 Item No 5.19.2 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 6 Way SP & N ---- etc., complete with all lead Each 1441.46 1441.46 4.0 False None None False None False 5765.84 0 2601433 81144 None V-6 Item No 5.19.3 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N ---- etc., complete with all lead Each 1813.37 1813.37 4.0 False None None False None False 7253.48 0 2601434 81144 None V-6 Item No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 12 Way SP & N ---- etc., complete with all lead Each 2264.29 2264.29 4.0 False None None False None False 9057.16 0 2601435 81144 None V-6 Item No 5.19.5 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 16 Way SP & N ---- etc., complete with all lead Each 3563.55 3563.55 4.0 False None None False None False 14254.2 0 2601436 81144 None V-6 Item No 5.46.1 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A SP ---- etc., complete with all lead Each 255.23 255.23 4.0 False None None False None False 1020.92 0 2601437 81144 None V-6 Item No 5.46.4 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A TP ---- etc., complete with all lead Each 974.75 974.75 4.0 False None None False None False 3899.0 0 2601438 81144 None V-6 Item No 5.32 Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC and optional or relay output for high/low frequency and wiring complete ---- etc., complete with all lead Each 1185.01 1185.01 4.0 False None None False None False 4740.04 0 2601439 81144 None V-6 Item No 11.3.1 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 W ---- etc., complete with all lead Each 669.68 669.68 10.0 False None None False None False 6696.8 0 2601440 81144 None V-6 Item No 11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- etc., complete with all lead Each 838.62 838.62 10.0 False None None False None False 8386.2 0 2601441 81144 None V-6 Item No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model ---- etc., complete with all lead Each 3626.75 3626.75 10.0 False None None False None False 36267.5 0 2601442 81144 None V-6 Item No 13.13 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 859.28 859.28 5.0 False None None False None False 4296.4 0 2601443 81144 None V-6 Item No 13.19 Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. ---- etc., complete with all lead Each 595.54 595.54 25.0 False None None False None False 14888.5 0 2601444 81144 None V-2 Item No 19.22.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge25 mm and up to 40 mm ---- etc., complete with all lead Sqm 90.83 90.83 78.311 False None None False None False 7112.98813 0 2601445 81144 None V-2 Item No 19.22.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge25 mm and up to 40 mm ---- etc., complete with all lead Sqm 90.83 90.83 243.414 False None None False None False 22109.29362 0 2601446 81144 None V-2 Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 1002.91 1002.91 78.311 False None None False None False 78538.88501 0 2601447 81144 None V-2 Item No 2.4.1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 9433.5 9433.5 3.0 False None None False None False 28300.5 0 2601448 81144 None V-2 Item No 20.93 Cleaning Quadrangle chajjas including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable arrangement, hose pipe etc., compl ---- etc., complete with all lead Sqm 18.41 18.41 120.15 False None None False None False 2211.9615 0 2601449 81144 None V-2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1091.29 1091.29 78.311 False None None False None False 85460.01119 0 2601450 81144 None V-2 Item No 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 313.02 313.02 309.414 False None None False None False 96852.77028 0 2601451 81144 None V-2 Item No 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1708.75 1708.75 309.414 False None None False None False 528711.1725 0 2601452 81144 None V-2 Item No 8.57 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 15.95 15.95 402.59 False None None False None False 6421.3105 0 2601453 81144 None V-2 Item No 8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 100.65 100.65 435.592 False None None False None False 43842.3348 0 2601454 81144 None V-2 Item No 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead Each 7337.09 7337.09 6.0 False None None False None False 44022.54 0 2601455 81144 None V-2 Item No 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead Each 5995.37 5995.37 5.0 False None None False None False 29976.85 0 2601456 81144 None V-2 Item No 14.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- etc., complete with all lead Each 5048.92 5048.92 11.0 False None None False None False 55538.12 0 2601457 81144 None V-2 Item No 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in-charge. ---- etc., complete with all lead Each 994.31 994.31 11.0 False None None False None False 10937.41 0 2601458 81144 None V-2 Item No 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead Each 6827.65 6827.65 6.0 False None None False None False 40965.9 0 2601459 81144 None V-2 Item No 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead Each 57.69 57.69 11.0 False None None False None False 634.59 0 2601460 81144 None 18-19 SR Item No 12.113.2 Providing and fixing Cl Nahani trap of approved make conforming to lSI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).12.5mmx75mm ---- etc., complete with all lead Each 251.64 251.64 6.0 False None None False None False 1509.84 0 2601461 81144 None V-2 Item No 14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g ---- etc., complete with all lead Each 114.16 114.16 6.0 False None None False None False 684.96 0 2601462 81144 None V-2 Item No 13.25 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms ---- etc., complete with all lead No 179.22 179.22 6.0 False None None False None False 1075.32 0 2601463 81144 None V-5 Item No 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 504.52 504.52 25.0 False None None False None False 12613.0 0 2601464 81144 None V-5 Item No 10.1.8 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for:PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 716.89 716.89 15.0 False None None False None False 10753.35 0 2601465 81144 None V-2 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm dia ---- etc., complete with all lead m 379.31 379.31 35.0 False None None False None False 13275.85 0 2601466 81144 None V-2 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm dia ---- etc., complete with all lead m 465.24 465.24 30.0 False None None False None False 13957.2 0 2601467 81144 None V-2 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm dia ---- etc., complete with all lead m 585.54 585.54 30.0 False None None False None False 17566.2 0 2601468 81144 None V-2 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia ---- etc., complete with all lead m 683.74 683.74 30.0 False None None False None False 20512.2 0 2601469 81144 None V-3 Item No 2.4 (A) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness..By Manual MeansIn area of light jungle ---- etc., complete with all lead Sqm 1363.67 1363.67 0.8 False None None False None False 1090.936 0 2601470 81144 None V-1 Item No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 115.46 115.46 24.0 False None None False None False 2771.04 0 2601471 81144 None V-1 Item No 1.15.3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work .Depth exceeding 3m, but not exceeding 4.5m ---- etc., complete with all lead Cum 562.73 562.73 131.46 False None None False None False 73976.4858 0 2601472 81144 None V-1 Item No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12475.47 12475.47 36.9 False None None False None False 460344.843 0 2601473 81144 None V-1 Item No 2.11 (a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Building ---- etc., complete with all lead Tonne 108726.03 108726.03 4.509 False None None False None False 490245.66927 0 2601474 81144 None V-2 Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 992.98 992.98 112.98 False None None False None False 112186.8804 0 2601475 81144 None V-2 Item No 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. ---- etc., complete with all lead Kg 77.78 77.78 35.0 False None None False None False 2722.3 0 2601476 81144 None V-2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- etc., complete with all lead Sqm 1592.17 1592.17 0.9 False None None False None False 1432.953 0 2601477 81144 None V-2 Item No 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 450.91 450.91 58.38 False None None False None False 26324.1258 0 2601478 81144 None V-2 Item No 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 430.25 430.25 88.22 False None None False None False 37956.655 0 2601479 81144 None V-2 Item No 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 211.47 211.47 58.38 False None None False None False 12345.6186 0 2601480 81144 None Item No XXXVIII Providing and fixing C. I Manhole covers 24" x 24" ---- etc., complete with all lead No 3040.93 3040.93 2.0 False None None False None False 6081.86 0 2601481 81144 None V-2 Item No 11.16.3 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 148.27 148.27 22.5 False None None False None False 3336.075 0 2601482 81144 None V-2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 686.7 686.7 31.2 False None None False None False 21425.04 0 2601483 81144 None V-5 Item No 10.1.5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 267.38 267.38 150.0 False None None False None False 40107.0 0 2601484 81144 None V-2 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia ---- etc., complete with all lead m 375.55 375.55 75.0 False None None False None False 28166.25 0 2601485 81144 None V-2 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia ---- etc., complete with all lead m 460.63 460.63 50.0 False None None False None False 23031.5 0 2601486 81144 None V-2 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm dia ---- etc., complete with all lead m 579.74 579.74 100.0 False None None False None False 57974.0 0 2601487 81144 None V-2 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia ---- etc., complete with all lead m 676.97 676.97 200.0 False None None False None False 135394.0 0 2601488 81144 None V-2 Item No 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.93 10.93 4000.0 False None None False None False 43720.0 0 2601489 81144 None V-5 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead No 6628.79 6628.79 15.0 False None None False None False 99431.85 0 2601490 81144 None 160 BAR SCREEN CHAMBER: MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. ---- etc., complete with all lead Set 53100.0 53100.0 1.0 False None None False None False 53100.0 0 2601491 81144 None 161 RAW SEWAGE TRANSFER PUMP Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:2 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm A).Valve : Suction : 2 nos,Delivery : 2 nos,Size :50 mm,Moc : B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set. ---- etc., complete with all lead Set 59000.0 59000.0 1.0 False None None False None False 59000.0 0 2601492 81144 None 162 STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :6100 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm ---- etc., complete with all lead Set 1046660.0 1046660.0 1.0 False None None False None False 1046660.0 0 2601493 81144 None 163 Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm ---- etc., complete with all lead Set 457840.0 457840.0 1.0 False None None False None False 457840.0 0 2601494 81144 None 164 Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm ---- etc., complete with all lead Set 450760.0 450760.0 1.0 False None None False None False 450760.0 0 2601495 81144 None 165 ROTOR: No of Rotors: 2, Moc: FRP, Diameter of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 ---- etc., complete with all lead Set 488520.0 488520.0 1.0 False None None False None False 488520.0 0 2601496 81144 None 166 Bio Zone (Rotor Placement Boat) No. of Biozone : 1 No, No. of Partisian inside Bio-zone : 4 Nos, MOC : MSFRP, Boat curvature Diameter : 1800mm, Bio Zone supporting with 150mm, Beam 2 Nos & 4 Nos. Legs., Boat Size:3350 mm ---- etc., complete with all lead Set 436600.0 436600.0 1.0 False None None False None False 436600.0 0 2601497 81144 None 167 Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. ---- etc., complete with all lead Set 112100.0 112100.0 1.0 False None None False None False 112100.0 0 2601498 81144 None 168 Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater ---- etc., complete with all lead Set 68440.0 68440.0 1.0 False None None False None False 68440.0 0 2601499 81144 None 169 FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 nos, Delivery : 2 nos, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set ---- etc., complete with all lead Set 29500.0 29500.0 1.0 False None None False None False 29500.0 0 2601500 81144 None 170 SAND FILTER : Diameter: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2601501 81144 None 171 ACTIVATED CARBON FILTER: Diameter: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2601502 81144 None 172 CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia ---- etc., complete with all lead Set 33040.0 33040.0 1.0 False None None False None False 33040.0 0 2601503 81144 None 173 INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. ---- etc., complete with all lead Set 147500.0 147500.0 1.0 False None None False None False 147500.0 0 2601504 81144 None 174 CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. ---- etc., complete with all lead Set 206500.0 206500.0 1.0 False None None False None False 206500.0 0 2601505 81144 None 175 FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 2601506 81144 None 176 INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter ---- etc., complete with all lead Set 118000.0 118000.0 1.0 False None None False None False 118000.0 0 2601507 81144 None V-6 Item No 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 core 35 sqmm ---- etc., complete with all lead Km 187246.95 187246.95 0.1 False None None False None False 18724.695 0 2601508 81144 None SR 21-22 V-6 Item No BSR-31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 35 sqmm to 95 sqmm ---- etc., complete with all lead Km 37846.34 37846.34 0.1 False None None False None False 3784.634 0 2601509 81144 None 19-20 SR Item No 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 32mm dia ---- etc., complete with all lead Each 142.2 142.2 6.0 False None None False None False 853.2 0 2601510 81144 None SR 21-22 V-6 Item No BSR 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm ---- etc., complete with all lead m 465.49 465.49 10.0 False None None False None False 4654.9 0 2601511 81144 None 19-20 SR Item No 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete with all lead Each 38.89 38.89 4.0 False None None False None False 155.56 0 2601512 81144 None SR 21-22 V-6 Item No BSR-29.03 Earth work excavation for cable trench of 0.5 to 0.75 M. Width and Depth upto 1 M including trial pits, depositing on bank upto a lead of 50 M,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 M wherever necessary as directed. In soil (hard) ---- etc., complete with all lead Cum 472.79 472.79 20.0 False None None False None False 9455.8 0 2601513 81144 None V-6 Item No 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 M long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead No 5172.74 5172.74 2.0 False None None False None False 10345.48 0 2601514 81144 None 19-20 SR Item No 6.18.3 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete with all lead m 23.09 23.09 50.0 False None None False None False 1154.5 0 2601515 81144 None V-6 Item No 12.58 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 99.66 99.66 25.0 False None None False None False 2491.5 0 1707985045000 0 None None Buildings Construction of STP works to CHC at Ankali in Chikkodi taluk, Belagavi District.(Slice-2) 2999806.44 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2601516 81145 None V-6 Item No 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 core 35 sqmm ---- etc., complete with all lead Km 190882.81 190882.81 0.1 False None None False None False 19088.281 0 2601517 81145 None SR 21-22 V-6 Item No BSR-31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 35 sqmm to 95 sqmm ---- etc., complete with all lead Km 38581.22 38581.22 0.1 False None None False None False 3858.122 0 2601518 81145 None 19-20 SR Item No 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 32mm dia ---- etc., complete with all lead Each 144.96 144.96 6.0 False None None False None False 869.76 0 2601519 81145 None SR 21-22 V-6 Item No BSR 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm ---- etc., complete with all lead m 474.53 474.53 8.0 False None None False None False 3796.24 0 2601520 81145 None 19-20 SR Item No 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete with all lead Each 39.64 39.64 4.0 False None None False None False 158.56 0 2601521 81145 None SR 21-22 V-6 Item No BSR-29.03 Earth work excavation for cable trench of 0.5 to 0.75 M. Width and Depth upto 1 M including trial pits, depositing on bank upto a lead of 50 M,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 M wherever necessary as directed. In soil (hard) ---- etc., complete with all lead Cum 481.97 481.97 10.0 False None None False None False 4819.7 0 2601522 81145 None V-6 Item No 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 M long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead No 5273.18 5273.18 1.0 False None None False None False 5273.18 0 2601523 81145 None 19-20 SR Item No 6.18.3 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete with all lead m 23.54 23.54 20.0 False None None False None False 470.8 0 2601524 81145 None V-6 Item No 12.58 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 101.59 101.59 20.0 False None None False None False 2031.8 0 2601525 81145 None 010 BAR SCREEN CHAMBER: MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. ---- etc., complete with all lead Set 53100.0 53100.0 1.0 False None None False None False 53100.0 0 2601526 81145 None 011 RAW SEWAGE TRANSFER PUMP Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:1 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm A).Valve : Suction : 2 nos,Delivery : 2 nos,Size :50 mm,Moc : B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set. ---- etc., complete with all lead Set 59000.0 59000.0 1.0 False None None False None False 59000.0 0 2601527 81145 None 012 STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :5350 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm ---- etc., complete with all lead Set 888540.0 888540.0 1.0 False None None False None False 888540.0 0 2601528 81145 None 013 Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm ---- etc., complete with all lead Set 398840.0 398840.0 1.0 False None None False None False 398840.0 0 2601529 81145 None 014 Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm ---- etc., complete with all lead Set 391760.0 391760.0 1.0 False None None False None False 391760.0 0 2601530 81145 None 015 ROTOR: No of Rotors: 2, Moc: FRP, Diameter of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 ---- etc., complete with all lead Set 252520.0 252520.0 1.0 False None None False None False 252520.0 0 2601531 81145 None 016 Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. ---- etc., complete with all lead Set 112100.0 112100.0 1.0 False None None False None False 112100.0 0 2601532 81145 None 017 Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater ---- etc., complete with all lead Set 68440.0 68440.0 1.0 False None None False None False 68440.0 0 2601533 81145 None 018 FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 nos, Delivery : 2 nos, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set ---- etc., complete with all lead Set 29500.0 29500.0 1.0 False None None False None False 29500.0 0 2601534 81145 None 019 SAND FILTER : Diameter: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. ---- etc., complete with all lead Set 123900.0 123900.0 1.0 False None None False None False 123900.0 0 2601535 81145 None 020 ACTIVATED CARBON FILTER: Diameter: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. ---- etc., complete with all lead Set 123900.0 123900.0 1.0 False None None False None False 123900.0 0 2601536 81145 None 021 CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia ---- etc., complete with all lead Set 33040.0 33040.0 1.0 False None None False None False 33040.0 0 2601537 81145 None 022 INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. ---- etc., complete with all lead Set 118000.0 118000.0 1.0 False None None False None False 118000.0 0 2601538 81145 None 023 CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. ---- etc., complete with all lead Set 147500.0 147500.0 1.0 False None None False None False 147500.0 0 2601539 81145 None 024 FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc., complete with all lead Set 70800.0 70800.0 1.0 False None None False None False 70800.0 0 2601540 81145 None 025 INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 1707985045000 1 None None Buildings Up-gradation of infrastructure facilities to the TLH at Ramdurga in Belagavi District.(Slice-3) 9296583.56 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2601541 81146 None CSR2023-24 V-1 Page No 37 Item No 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead Cum 126.37 126.37 207.5 False None None False None False 26221.775 0 2601542 81146 None CSR2023-24 V-1 Page No 34 Item No 1.9 Filling available excavated earth (excluding rock)in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 329.57 329.57 488.0 False None None False None False 160830.16 0 2601543 81146 None CSR2023-24 V-2 Page No 14 Item No 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead Cum 9873.59 9873.59 25.0 False None None False None False 246839.75 0 2601544 81146 None CSR2023-24 V-1 Page No 15 Item No 2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7702.86 7702.86 63.0111 False None None False None False 485365.681746 0 2601545 81146 None CSR2023-24 V-2 Page No 104 Item No 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 No of 75 mm Aluminium hinges. ---- etc., complete with all lead Sqm 1967.53 1967.53 15.75 False None None False None False 30988.5975 0 2601546 81146 None CSR2023-24 V-2 Page No 105 Item No 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick one side teak and one side commercial ---- etc., complete with all lead Sqm 4828.38 4828.38 20.16 False None None False None False 97340.1408 0 2601547 81146 None CSR2023-24 V-2 Page No 77 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. ---- etc., complete with all lead Sqm 5548.24 5548.24 3.96 False None None False None False 21971.0304 0 2601548 81146 None CSR2023-24 V-2 Page No 197 Item No 20.3.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/m²) ---- etc., complete with all lead Sqm 1803.98 1803.98 22.0 False None None False None False 39687.56 0 2601549 81146 None CSR2023-24 V-2 Page No 105 Item No 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead No 1303.42 1303.42 10.0 False None None False None False 13034.2 0 2601550 81146 None CSR2023-24 V-2 Page No 105 Item No 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on thebody, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead No 1380.24 1380.24 3.0 False None None False None False 4140.72 0 2601551 81146 None CSR2023-24 V-2 Page No 207 Item No 20.96 Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dust, etc., using suitable bombay broom stick, squezers ---- etc., complete with all lead Sqm 3.71 3.71 1600.0 False None None False None False 5936.0 0 2601552 81146 None CSR2023-24 V-2 Page No 206 Item No 20.91 External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru ---- etc., complete with all lead Sqm 1.23 1.23 1800.0 False None None False None False 2214.0 0 2601553 81146 None CSR2023-24 V-2 Page No 188 Item No 19.13.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area beyond 3 m² ---- etc., complete with all lead Sqm 116.46 116.46 35.0 False None None False None False 4076.1 0 2601554 81146 None CSR2023-24 V-5 Page No 113 Item No 10.1.3 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 50mm dia., 6 kg/sqcm & class 5 ---- etc., complete with all lead m 125.13 125.13 200.0 False None None False None False 25026.0 0 2601555 81146 None CSR2023-24 V-5 Page No 113 Item No 10.1.5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 272.58 272.58 210.0 False None None False None False 57241.8 0 2601556 81146 None CSR2023-24 V-5 Page No 113 Item No 10.1.7 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 509.23 509.23 372.33 False None None False None False 189601.6059 0 2601557 81146 None CSR2023-24 V-5 Page No 113 Item No 10.1.8 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 723.58 723.58 524.0 False None None False None False 379155.92 0 2601558 81146 None CSR2023-24 V-2 Page No 122 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia ---- etc., complete with all lead m 382.85 382.85 115.0 False None None False None False 44027.75 0 2601559 81146 None CSR2023-24 V-2 Page No 122 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia ---- etc., complete with all lead m 469.58 469.58 180.0 False None None False None False 84524.4 0 2601560 81146 None CSR2023-24 V-2 Page No 112 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm dia ---- etc., complete with all lead m 591.0 591.0 210.0 False None None False None False 124110.0 0 2601561 81146 None CSR2023-24 V-2 Page No 136 Item No 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead Each 58.23 58.23 10.0 False None None False None False 582.3 0 2601562 81146 None CSR2023-24 V-2 Page No 131 Item No 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead Each 6051.27 6051.27 5.0 False None None False None False 30256.35 0 2601563 81146 None CSR2023-24 V-2 Page No 131 Item No 14.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ---- etc., complete with all lead Each 7430.28 7430.28 4.0 False None None False None False 29721.12 0 2601564 81146 None CSR2023-24 V-2 Page No 132 Item No 14.7.5 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap ---- etc., complete with all lead Each 3173.07 3173.07 5.0 False None None False None False 15865.35 0 2601565 81146 None CSR2023-24 V-2 Page No 134 Item No 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm ---- etc., complete with all lead Each 6296.59 6296.59 5.0 False None None False None False 31482.95 0 2601566 81146 None CSR2023-24 V-2 Page No A-33 Item No 496 Rectangular shape 453x357 mm Mirror with Plastic moulded frame ---- etc., complete with all lead Each 359.31 359.31 5.0 False None None False None False 1796.55 0 2601567 81146 None CSR2023-24 V-2 Page No 137 Item No 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead Each 614.54 614.54 6.0 False None None False None False 3687.24 0 2601568 81146 None CSR2023-24 V-2 Page No 119 Item No 13.15 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete with all lead No 898.27 898.27 12.0 False None None False None False 10779.24 0 2601569 81146 None CSR2023-24 V-2 Page No 117 Item No 13.4.1 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :(25 mm nominal bore) ---- etc., complete with all lead No 680.21 680.21 6.0 False None None False None False 4081.26 0 2601570 81146 None CSR2023-24 V-2 Page No 117 Item No 13.4.2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :(32 mm nominal bore) ---- etc., complete with all lead No 740.92 740.92 4.0 False None None False None False 2963.68 0 2601571 81146 None CSR2023-24 V-2 Page No 117 Item No 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore ---- etc., complete with all lead No 389.04 389.04 6.0 False None None False None False 2334.24 0 2601572 81146 None CSR2023-24 V-2 Page No 119 Item No 13.12 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 ---- etc., complete with all lead No 786.76 786.76 4.0 False None None False None False 3147.04 0 2601573 81146 None CSR2023-24 V-1 Page No 5 Item No 1.1 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ---- etc., complete with all lead Cum 198.24 198.24 95.0 False None None False None False 18832.8 0 2601574 81146 None CSR2023-24 V-6 Page No 2 Item No 1.1.1 Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junctionboxes,adhesivepaste etc,and fixing using inverted wood plugs incase of RCCceiling andRCC wall/stonestructure or rawl plugs incase of brick wallsandcement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.20 mm dia ---- etc., complete with all lead m 85.49 85.49 100.0 False None None False None False 8549.0 0 2601575 81146 None CSR2023-24 V-6 Page No 2 Item No 1.1.2 Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junctionboxes,adhesivepaste etc,and fixing using inverted wood plugs incase of RCCceiling andRCC wall/stonestructure or rawl plugs incase of brick wallsandcement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia ---- etc., complete with all lead m 96.31 96.31 120.0 False None None False None False 11557.2 0 2601576 81146 None CSR2023-24 V-6 Page No 2 Item No 1.1.3 SSupplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junctionboxes,adhesivepaste etc,and fixing using inverted wood plugs incase of RCCceiling andRCC wall/stonestructure or rawl plugs incase of brick wallsandcement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.32 mm dia ---- etc., complete with all lead m 126.03 126.03 100.0 False None None False None False 12603.0 0 2601577 81146 None CSR2023-24 V-6 Page No 2 Item No 1.3.1 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia ---- etc., complete with all lead m 80.85 80.85 100.0 False None None False None False 8085.0 0 2601578 81146 None CSR2023-24 V-6 Page No 2 Item No 1.3.2 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 25 mm dia ---- etc., complete with all lead m 93.93 93.93 150.0 False None None False None False 14089.5 0 2601579 81146 None CSR2023-24 V-6 Page No 2 Item No 1.3.3 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 32 mm dia ---- etc., complete with all lead m 117.71 117.71 120.0 False None None False None False 14125.2 0 2601580 81146 None CSR2023-24 V-6 Page No 2 Item No 1.4.1 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm ---- etc., complete with all lead Each 126.03 126.03 20.0 False None None False None False 2520.6 0 2601581 81146 None CSR2023-24 V-6 Page No 2 Item No 1.4.2 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- etc., complete with all lead Each 140.03 140.03 15.0 False None None False None False 2100.45 0 2601582 81146 None CSR2023-24 V-6 Page No 2 Item No 1.5.1 Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box ---- etc., complete with all lead Each 58.26 58.26 39.0 False None None False None False 2272.14 0 2601583 81146 None CSR2023-24 V-6 Page No 3 Item No 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box ---- etc., complete with all lead Each 66.58 66.58 20.0 False None None False None False 1331.6 0 2601584 81146 None CSR2023-24 V-6 Page No 4 Item No 1.11 Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod. ---- etc., complete with all lead Each 61.83 61.83 15.0 False None None False None False 927.45 0 2601585 81146 None CSR2023-24 V-6 Page No 4 Item No 1.12 Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod ---- etc., complete with all lead Each 190.24 190.24 15.0 False None None False None False 2853.6 0 2601586 81146 None CSR2023-24 V-6 Page No 4 Item No 1.13 Supplying And Fixing Metal Fan Box with Round Hook ---- etc., complete with all lead Each 139.11 139.11 15.0 False None None False None False 2086.65 0 2601587 81146 None CSR2023-24 V-6 Page No 5 Item No 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Short point upto 3 mts from tapping point to out let via switch ---- etc., complete with all lead Point 319.84 319.84 55.0 False None None False None False 17591.2 0 2601588 81146 None CSR2023-24 V-6 Page No 5 Item No 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Medium point above 3 mts upto 6mts from tapping point to outlet via switch ---- etc., complete with all lead Point 450.63 450.63 55.0 False None None False None False 24784.65 0 2601589 81146 None CSR2023-24 V-6 Page No 5 Item No 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Long point above 6 mts upto 10 mts from tapping point to outlet via switch ---- etc., complete with all lead Point 659.9 659.9 40.0 False None None False None False 26396.0 0 2601590 81146 None CSR2023-24 V-6 Page No 5 Item No 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches ---- etc., complete with all lead Point 804.95 804.95 30.0 False None None False None False 24148.5 0 2601591 81146 None CSR2023-24 V-6 Page No 5 Item No 2.2.5 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches ---- etc., complete with all lead Point 1175.92 1175.92 30.0 False None None False None False 35277.6 0 2601592 81146 None CSR2023-24 V-6 Page No 5 Item No 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1mm ---- etc., complete with all lead m 22.59 22.59 500.0 False None None False None False 11295.0 0 2601593 81146 None CSR2023-24 V-6 Page No 5 Item No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5mm ---- etc., complete with all lead m 30.91 30.91 600.0 False None None False None False 18546.0 0 2601594 81146 None CSR2023-24 V-6 Page No 5 Item No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5mm ---- etc., complete with all lead m 49.94 49.94 500.0 False None None False None False 24970.0 0 2601595 81146 None CSR2023-24 V-6 Page No 5 Item No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 4mm ---- etc., complete with all lead m 74.91 74.91 200.0 False None None False None False 14982.0 0 2601596 81146 None CSR2023-24 V-6 Page No 5 Item No 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 6mm ---- etc., complete with all lead m 109.39 109.39 200.0 False None None False None False 21878.0 0 2601597 81146 None CSR2023-24 V-6 Page No 7 Item No 2.6.4 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694:2010. 3C x 10 mm2 ---- etc., complete with all lead m 491.06 491.06 90.0 False None None False None False 44195.4 0 2601598 81146 None CSR2023-24 V-6 Page No 8 Item No 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1 - 2Way ---- etc., complete with all lead Each 164.08 164.08 45.0 False None None False None False 7383.6 0 2601599 81146 None CSR2023-24 V-6 Page No 8 Item No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4 - 5Way ---- etc., complete with all lead Each 210.45 210.45 75.0 False None None False None False 15783.75 0 2601600 81146 None CSR2023-24 V-6 Page No 8 Item No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way ---- etc., complete with all lead Each 261.58 261.58 50.0 False None None False None False 13079.0 0 2601601 81146 None CSR2023-24 V-6 Page No 8 Item No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead Each 310.33 310.33 40.0 False None None False None False 12413.2 0 2601602 81146 None CSR2023-24 V-6 Page No 8 Item No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10 / 12 Way ---- etc., complete with all lead Each 379.29 379.29 40.0 False None None False None False 15171.6 0 2601603 81146 None CSR2023-24 V-6 Page No 8 Item No 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 1 to 2Module ---- etc., complete with all lead Each 162.89 162.89 30.0 False None None False None False 4886.7 0 2601604 81146 None CSR2023-24 V-6 Page No 8 Item No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 4 Module ---- etc., complete with all lead Each 208.08 208.08 30.0 False None None False None False 6242.4 0 2601605 81146 None CSR2023-24 V-6 Page No 8 Item No 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 6 Module ---- etc., complete with all lead Each 278.23 278.23 15.0 False None None False None False 4173.45 0 2601606 81146 None CSR2023-24 V-6 Page No 8 Item No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 8 Module ---- etc., complete with all lead Each 337.68 337.68 15.0 False None None False None False 5065.2 0 2601607 81146 None CSR2023-24 V-6 Page No 8 Item No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 10/12 Module ---- etc., complete with all lead Each 409.02 409.02 15.0 False None None False None False 6135.3 0 2601608 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch ---- etc., complete with all lead Each 121.28 121.28 30.0 False None None False None False 3638.4 0 2601609 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps two way switch ---- etc., complete with all lead Each 197.37 197.37 50.0 False None None False None False 9868.5 0 2601610 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets ---- etc., complete with all lead Each 203.32 203.32 30.0 False None None False None False 6099.6 0 2601611 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator's ---- etc., complete with all lead Each 424.47 424.47 15.0 False None None False None False 6367.05 0 2601612 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal sockets ---- etc., complete with all lead Each 280.6 280.6 15.0 False None None False None False 4209.0 0 2601613 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps one way Switch ---- etc., complete with all lead Each 214.02 214.02 10.0 False None None False None False 2140.2 0 2601614 81146 None CSR2023-24 V-6 Page No 9 Item No 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 185.48 185.48 10.0 False None None False None False 1854.8 0 2601615 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.1 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A SP Switch ---- etc., complete with all lead Each 65.4 65.4 18.0 False None None False None False 1177.2 0 2601616 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.2 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board6A Two Way Switch ---- etc., complete with all lead Each 83.23 83.23 28.0 False None None False None False 2330.44 0 2601617 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.3 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board6A Three Way 5 Pin Socket ---- etc., complete with all lead Each 83.23 83.23 30.0 False None None False None False 2496.9 0 2601618 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Pin Top ---- etc., complete with all lead Each 103.44 103.44 20.0 False None None False None False 2068.8 0 2601619 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.5 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling Rose ---- etc., complete with all lead Each 92.74 92.74 20.0 False None None False None False 1854.8 0 2601620 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.6 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Pendant Holder ---- etc., complete with all lead Each 84.42 84.42 15.0 False None None False None False 1266.3 0 2601621 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.7 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.Batten holder ---- etc., complete with all lead Each 87.99 87.99 15.0 False None None False None False 1319.85 0 2601622 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.8 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A bell push ---- etc., complete with all lead Each 83.23 83.23 15.0 False None None False None False 1248.45 0 2601623 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.9 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A bell buzzer ---- etc., complete with all lead Each 154.57 154.57 15.0 False None None False None False 2318.55 0 2601624 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.10 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A SP switch ---- etc., complete with all lead Each 155.76 155.76 20.0 False None None False None False 3115.2 0 2601625 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.11 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Two Way Switch ---- etc., complete with all lead Each 173.59 173.59 20.0 False None None False None False 3471.8 0 2601626 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.12 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A Three 5 Pin Socket ---- etc., complete with all lead Each 136.74 136.74 20.0 False None None False None False 2734.8 0 2601627 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.13 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.16 A Three pin top ---- etc., complete with all lead Each 130.79 130.79 15.0 False None None False None False 1961.85 0 2601628 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.14 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.32 A backlight DP ---- etc., complete with all lead Each 275.85 275.85 9.0 False None None False None False 2482.65 0 2601629 81146 None CSR2023-24 V-6 Page No 10 Item No 3.14.15 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16/6A combined plug and socket with control switch ---- etc., complete with all lead Each 259.2 259.2 9.0 False None None False None False 2332.8 0 2601630 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete with all lead Each 493.44 493.44 6.0 False None None False None False 2960.64 0 2601631 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.2 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A SP ---- etc., complete with all lead Each 942.88 942.88 6.0 False None None False None False 5657.28 0 2601632 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.3 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A SP ---- etc., complete with all lead Each 964.28 964.28 6.0 False None None False None False 5785.68 0 2601633 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A DP ---- etc., complete with all lead Each 878.67 878.67 6.0 False None None False None False 5272.02 0 2601634 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.5 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A DP ---- etc., complete with all lead Each 1260.34 1260.34 6.0 False None None False None False 7562.04 0 2601635 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.6 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A DP ---- etc., complete with all lead Each 1310.28 1310.28 6.0 False None None False None False 7861.68 0 2601636 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A TPN ---- etc., complete with all lead Each 2041.51 2041.51 6.0 False None None False None False 12249.06 0 2601637 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A TPN ---- etc., complete with all lead Each 3619.32 3619.32 6.0 False None None False None False 21715.92 0 2601638 81146 None CSR2023-24 V-6 Page No 18 Item No 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN ---- etc., complete with all lead Each 3671.63 3671.63 6.0 False None None False None False 22029.78 0 2601639 81146 None CSR2023-24 V-6 Page No 18 Item No 5.19.1 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.4 Way SP & N ---- etc., complete with all lead Each 1475.55 1475.55 5.0 False None None False None False 7377.75 0 2601640 81146 None CSR2023-24 V-6 Page No 18 Item No 5.19.2 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 6 Way SP & N ---- etc., complete with all lead Each 1410.15 1410.15 5.0 False None None False None False 7050.75 0 2601641 81146 None CSR2023-24 V-6 Page No 18 Item No 5.19.3 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.8 Way SP & N ---- etc., complete with all lead Each 1773.99 1773.99 5.0 False None None False None False 8869.95 0 2601642 81146 None CSR2023-24 V-6 Page No 18 Item No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.12 Way SP & N ---- etc., complete with all lead Each 2215.11 2215.11 5.0 False None None False None False 11075.55 0 2601643 81146 None CSR2023-24 V-6 Page No 18 Item No 5.19.5 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.16 Way SP & N ---- etc., complete with all lead Each 3486.15 3486.15 5.0 False None None False None False 17430.75 0 2601644 81146 None CSR2023-24 V-6 Page No 21 Item No 5.46.1 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.16 - 32 A SP ---- etc., complete with all lead Each 249.69 249.69 2.0 False None None False None False 499.38 0 2601645 81146 None CSR2023-24 V-6 Page No 21 Item No 5.46.4 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A TP ---- etc., complete with all lead Each 953.58 953.58 2.0 False None None False None False 1907.16 0 2601646 81146 None CSR2023-24 V-6 Page No 19 Item No 5.32 Supplying and fixing digital frequency M with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC and optional or relay output for high/low frequency and wiring complete ---- etc., complete with all lead Each 1159.28 1159.28 4.0 False None None False None False 4637.12 0 2601647 81146 None CSR2023-24 V-6 Page No 18 Item No 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board ---- etc., complete with all lead Each 11004.2 11004.2 4.0 False None None False None False 44016.8 0 2601648 81146 None CSR2023-24 V-6 Page No 43 Item No 11.3.1 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. Power Input: 220-240V@ 50/60Hz & Power factor greaterthan0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W ---- etc., complete with all lead Each 655.14 655.14 15.0 False None None False None False 9827.1 0 2601649 81146 None CSR2023-24 V-6 Page No 43 Item No 11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. Power Input: 220-240V@ 50/60Hz & Power factor greaterthan0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- etc., complete with all lead Each 820.41 820.41 15.0 False None None False None False 12306.15 0 2601650 81146 None CSR2023-24 V-6 Page No 30 Item No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model ---- etc., complete with all lead Each 3547.98 3547.98 10.0 False None None False None False 35479.8 0 2601651 81146 None CSR2023-24 V-6 Page No 30 Item No 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete 12" Sweep (300 mm) ---- etc., complete with all lead Each 3530.14 3530.14 10.0 False None None False None False 35301.4 0 2601652 81146 None CSR2023-24 V-6 Page No 57 Item No 13.1 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 203.32 203.32 10.0 False None None False None False 2033.2 0 2601653 81146 None CSR2023-24 V-6 Page No 57 Item No 13.13 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame ---- etc., complete with all lead Each 840.62 840.62 10.0 False None None False None False 8406.2 0 2601654 81146 None CSR2023-24 V-6 Page No 58 Item No 13.19 Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required No of round blocks and clA. ---- etc., complete with all lead Each 582.61 582.61 25.0 False None None False None False 14565.25 0 2601655 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps SP ---- etc., complete with all lead Each 493.44 493.44 7.0 False None None False None False 3454.08 0 2601656 81146 None CSR2023-24 V-6 Page No 17 Item No 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 Amps TPN ---- etc., complete with all lead Each 3671.63 3671.63 9.0 False None None False None False 33044.67 0 2601657 81146 None CSR2023-24 V-6 Page No 15 Item No 5.11.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)upto 63 Amps ---- etc., complete with all lead Each 6515.72 6515.72 6.0 False None None False None False 39094.32 0 2601658 81146 None CSR2023-24 V-6 Page No 15 Item No 5.11.3 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)125 Amps ---- etc., complete with all lead Each 12277.61 12277.61 7.0 False None None False None False 85943.27 0 2601659 81146 None CSR2023-24 V-6 Page No 57 Item No 13.18.4 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15-63 Amps TPDT/COS ---- etc., complete with all lead Each 344.81 344.81 7.0 False None None False None False 2413.67 0 2601660 81146 None CSR2023-24 V-6 Page No 58 Item No 13.18.5 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.125 Amps TPDT/COS ---- etc., complete with all lead Each 560.02 560.02 7.0 False None None False None False 3920.14 0 2601661 81146 None CSR2023-24 V-5 Page No 113 Item No 10.1.5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 272.58 272.58 240.0 False None None False None False 65419.2 0 2601662 81146 None CSR2023-24 V-5 Page No 113 Item No 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 509.22 509.22 100.0 False None None False None False 50922.0 0 2601663 81146 None CSR2023-24 V-2 Page No 122 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia ---- etc., complete with all lead m 382.85 382.85 65.0 False None None False None False 24885.25 0 2601664 81146 None CSR2023-24 V-2 Page No 122 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20mm dia ---- etc., complete with all lead m 469.58 469.58 50.0 False None None False None False 23479.0 0 2601665 81146 None CSR2023-24 V-2 Page No 122 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25mm dia ---- etc., complete with all lead m 591.0 591.0 100.0 False None None False None False 59100.0 0 2601666 81146 None CSR2023-24 V-2 Page No 122 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32mm dia ---- etc., complete with all lead m 690.12 690.12 200.0 False None None False None False 138024.0 0 2601667 81146 None CSR2023-24 V-2 Page No 123 Item No 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 11.15 11.15 4000.0 False None None False None False 44600.0 0 2601668 81146 None CSR2023-24 V-5 Page No 191 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead No 6757.5 6757.5 47.0 False None None False None False 317602.5 0 2601669 81146 None CSR2023-24 V-3 Page No 9 Item No 2.4 (A) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness..By Manual MeansIn area of light jungle ---- etc., complete with all lead Sqm 1390.2 1390.2 0.8 False None None False None False 1112.16 0 2601670 81146 None CSR2023-24 V-1 Page No 8 Item No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 117.7 117.7 24.0 False None None False None False 2824.8 0 2601671 81146 None CSR2023-24 V-1 Page No Item No 1.15.3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 3m, but not exceeding 4.5m ---- etc., complete with all lead Cum 573.7 573.7 131.46 False None None False None False 75418.602 0 2601672 81146 None CSR2023-24 V-1 Page No 15 Item No 2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7017.7 7017.7 5.9039 False None None False None False 41431.79903 0 2601673 81146 None CSR2023-24 V-1 Page No 16 Item No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates BOTTOM SLAB,RC WALL,TOP SLAB,Beams ---- etc., complete with all lead Cum 12717.7 12717.7 35.61 False None None False None False 452877.297 0 2601674 81146 None CSR2023-24 V-1 Page No 18 Item No 2.11 (a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Building ---- etc., complete with all lead Tonne 110837.2 110837.2 4.3493 False None None False None False 482064.23396 0 2601675 81146 None CSR2023-24 V-2 Page No 149 Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 1012.3 1012.3 107.0 False None None False None False 108316.1 0 2601676 81146 None CSR2023-24 V-2 Page No 43 Item No 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. ---- etc., complete with all lead Kg 79.3 79.3 35.0 False None None False None False 2775.5 0 2601677 81146 None CSR2023-24 V-2 Page No 17 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- etc., complete with all lead Sqm 1623.1 1623.1 0.899 False None None False None False 1459.1669 0 2601678 81146 None CSR2023-24 V-2 Page No 42 Item No 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 459.7 459.7 58.37 False None None False None False 26832.689 0 2601679 81146 None CSR2023-24 V-2 Page No 41 Item No 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 438.6 438.6 85.0 False None None False None False 37281.0 0 2601680 81146 None CSR2023-24 V-2 Page No 46 Item No 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 215.6 215.6 58.379 False None None False None False 12586.5124 0 2601681 81146 None CSR2023-24 Page No Item No XXXVIII Providing and fixing C. I Manhole covers 24" x 24" ---- etc., complete with all lead No 3100.0 3100.0 2.0 False None None False None False 6200.0 0 2601682 81146 None CSR2023-24 V-2 Page No 83 Item No 11.16.3 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 151.2 151.2 22.5 False None None False None False 3402.0 0 2601683 81146 None CSR2023-24 V-2 Page No 85 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 700.0 700.0 31.2 False None None False None False 21840.0 0 2601684 81146 None 146 BAR SCREEN CHAMBER: MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. ---- etc., complete with all lead Set 53100.0 53100.0 1.0 False None None False None False 53100.0 0 2601685 81146 None 147 RAW SEWAGE TRANSFER PUMP Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:2 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm A).Valve : Suction : 2 No,Delivery : 2 No,Size :50 mm,Moc : B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 No, Size :50 mm, Moc : Make : Kriloskar / CRI, Pump (1 w + 1S) 2No of pump = 1 set. ---- etc., complete with all lead Set 59000.0 59000.0 1.0 False None None False None False 59000.0 0 2601686 81146 None 148 STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :6100 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm ---- etc., complete with all lead Set 1046660.0 1046660.0 1.0 False None None False None False 1046660.0 0 2601687 81146 None 149 Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm ---- etc., complete with all lead Set 457840.0 457840.0 1.0 False None None False None False 457840.0 0 2601688 81146 None 150 Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm ---- etc., complete with all lead Set 450760.0 450760.0 1.0 False None None False None False 450760.0 0 2601689 81146 None 151 ROTOR: No of Rotors: 2, Moc: FRP, DiaM of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 ---- etc., complete with all lead Set 488520.0 488520.0 1.0 False None None False None False 488520.0 0 2601690 81146 None 152 Bio Zone (Rotor Placement Boat) No. of Biozone : 1 No, No. of Partisian inside Bio-zone : 4 No, MOC : MSFRP, Boat curvature DiaM : 1800mm, Bio Zone supporting with 150mm, Beam 2 No & 4 No. Legs., Boat Size:3350 mm ---- etc., complete with all lead Set 436600.0 436600.0 1.0 False None None False None False 436600.0 0 2601691 81146 None 153 Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. ---- etc., complete with all lead Set 112100.0 112100.0 1.0 False None None False None False 112100.0 0 2601692 81146 None 154 Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater ---- etc., complete with all lead Set 68440.0 68440.0 1.0 False None None False None False 68440.0 0 2601693 81146 None 155 FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 No, Delivery : 2 No, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 No, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2No of pump = 1 set ---- etc., complete with all lead Set 29500.0 29500.0 1.0 False None None False None False 29500.0 0 2601694 81146 None 156 SAND FILTER : DiaM: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2601695 81146 None 157 ACTIVATED CARBON FILTER: DiaM: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2601696 81146 None 158 CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia ---- etc., complete with all lead Set 33040.0 33040.0 1.0 False None None False None False 33040.0 0 2601697 81146 None 159 INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. ---- etc., complete with all lead Set 147500.0 147500.0 1.0 False None None False None False 147500.0 0 2601698 81146 None 160 CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, Ms etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. ---- etc., complete with all lead Set 206500.0 206500.0 1.0 False None None False None False 206500.0 0 2601699 81146 None 161 FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 2601700 81146 None 162 INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter ---- etc., complete with all lead Set 118000.0 118000.0 1.0 False None None False None False 118000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1707985046000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1707985046000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1707985046000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of Karnataka public Procurement on or before the last date and time of bid submission. None 1707985181000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1707985194000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1707985206000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1707985214000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1707985222000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1707985232000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1707985243000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1707985302000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1707985318000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1707985327000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1707985336000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs.126.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23).Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation 440.00 Cum,2)RCC and PCC 116.00 Cum 3)Steel Reinforcement for RCC work 7.00 Tonnes 5)Flooring/Dadooing(Vitrified/Granite/ Ceramic/Cement concrete/cladding/ dadooing) 2000.00 Sqm,6)Plastering 1000.00 Sqm,7)Painting 5900.00 Sqm, 8)WPC-240.00 sqm. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2(c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.13.00 Lakhs in any one year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).The letter of willingness of the sub contractor to be engaged for electrical, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.10.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).The letter of willingness of the sub contractor to be engaged for water supply & Sanitary, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(f) The Tenderer or his identified sub-contractor should have executed similar STPworks totaling to Rs.50.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (f). The letter of willingness of the sub contractor to be engaged for STP works should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of existing commitments and ongoing worksClause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2018-19 to 2022-23 updated to 2023-24 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023 24 price level, of existing commitments and ongoing works to be completed during the next 06 months. Note:The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works None None None None Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl.No. Description of Equipment Quantity 1 No Min 10 cft capacity Concrete Mixer-1 No. 2.Tipper-1 Nos 3.Excavator-1 No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Invoice and Receipt document to be uploaded. None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No Of Persons 1)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 2 Two Nos 2)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings- 1No and should have been working inpermanent role of the organization for at least two years. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates should be uploaded None None None None Clause ITT 3.2(a):The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.506.00 Lakhs. Note : a) For Clause 3.2 (a) the certificate Turn over and balance sheet duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.76.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate and balance sheet issued by Charted accountant. True Technical Bid KPWD Class-II and above Registration Certificate issued by Chief Engineer. True Technical Bid Tenderer should have ESI & PF Certificates his/firm name and PF paid receipt of last month. True Technical Bid Tenderer should have latest GST Registration PAN Card and latest 3 GSTclearance certificate in their name. True Technical Bid The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1708066904000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, Arogya Soudha, 3rd floor, Leprosy Hospital premises, 1st cross, Magadi Road street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None