| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1707999045000 | 0 | None | None | Buildings | 1 Upgradation of infrastructure facilities of the TLH and Staff Quarters at Alur in Hassan District. (Civil Works) (Slice-1) | 5197140.06 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2606692 | 81440 | None | P-5 I-1.4.1 Vol-1 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. ---- etc., complete with all lead | Cum | 294.13 | 294.13 | 65.45 | False | None | None | False | None | False | 19250.8085 | 0 | | 2606693 | 81440 | None | VOL-2,P.No.47, I.No.8.35.2 of PWD SR 2023-24 | Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plasteredsurfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 240.65 | 240.65 | 432.362 | False | None | None | False | None | False | 104047.9153 | 0 | | 2606694 | 81440 | None | VOL-2,P.No.81, I.No.11.16.2 of PWD SR 2023-24 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. ---- etc., complete with all lead | Sqm | 178.66 | 178.66 | 9687.1 | False | None | None | False | None | False | 1730697.286 | 0 | | 2606695 | 81440 | None | VOL-2,P.No.26, I.No.7.38 of PWD SR 2023-24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required ---- etc., complete with all lead | Sqm | 690.35 | 690.35 | 766.05 | False | None | None | False | None | False | 528842.6175 | 0 | | 2606696 | 81440 | None | VOL-2,P.No. 48, I.No. 8.40 of PWD SR 2023-24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 139.77 | 139.77 | 150.0 | False | None | None | False | None | False | 20965.5 | 0 | | 2606697 | 81440 | None | 2023-24, Vol-02, Item No-9.25, Page No-63 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 972.32 | 972.32 | 290.0 | False | None | None | False | None | False | 281972.8 | 0 | | 2606698 | 81440 | None | P-15 I-2.1.2 Vol-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 6884.03 | 6884.03 | 85.8375 | False | None | None | False | None | False | 590907.925125 | 0 | | 2606699 | 81440 | None | P-15 I-2.2.2 Vol-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with 20% partial replacement with Recycled concrete aggregate ---- etc., complete with all lead | Cum | 7593.82 | 7593.82 | 26.57 | False | None | None | False | None | False | 201767.7974 | 0 | | 2606700 | 81440 | None | 2023-24 S.R | Additionalities for formwork,centrening,scaffolding charges shall be added on percentage to the finished concrete ---- etc., complete with all lead | Rs | 607.51 | 607.51 | 26.57 | False | None | None | False | None | False | 16141.5407 | 0 | | 2606701 | 81440 | None | P-18 I-2.11 a Vol-1 | Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- etc., complete with all lead | Tonne | 108726.04 | 108726.04 | 2.1259 | False | None | None | False | None | False | 231140.688436 | 0 | | 2606702 | 81440 | None | P-15 I-2.1.4 Vol-2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 7556.14 | 7556.14 | 7.125 | False | None | None | False | None | False | 53837.4975 | 0 | | 2606703 | 81440 | None | 2023-24 S.R | Additionalities for formwork,centrening,scaffolding charges shall be added on percentage to the finished concrete for beams/lintel beams/staircase ---- etc., complete with all lead | Rs | 4533.69 | 4533.69 | 7.125 | False | None | None | False | None | False | 32302.54125 | 0 | | 2606704 | 81440 | None | page 62 I No9.22.2,Vol-II | Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to
be made separately)of Size 600x600. ---- etc., complete with all lead | Sqm | 1611.62 | 1611.62 | 368.0 | False | None | None | False | None | False | 593076.16 | 0 | | 2606705 | 81440 | None | P-60 I No9.9 vol-II | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete ---- etc., complete with all lead | Sqm | 1307.77 | 1307.77 | 56.275 | False | None | None | False | None | False | 73594.75675 | 0 | | 2606706 | 81440 | None | P-89,I No 11.36.2 Vol-II | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead | Sqm | 1194.74 | 1194.74 | 8.4 | False | None | None | False | None | False | 10035.816 | 0 | | 2606707 | 81440 | None | P-89,I No 11.37.2 Vol-II | Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions of
engineer-in-charge . (Cost of aluminium snap beading shall be paid in
basic item):With float glass panes of 5 mm thickness (weight not less
than 12.50 kg/m²) including cost of materials, labour, usage charges of
machinery complete as per specifications. ---- etc., complete with all lead | Sqm | 1423.23 | 1423.23 | 8.4 | False | None | None | False | None | False | 11955.132 | 0 | | 2606708 | 81440 | None | P-109 I-12.87 Vol-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 7962.09 | 7962.09 | 87.49 | False | None | None | False | None | False | 696603.2541 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 1 Upgradation of infrastructure facilities of the TLH and Staff Quarters at Alur in Hassan District. (Water Supply & Sanitary Works) (Slice-1) | 67756.08 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2606709 | 81441 | None | Vol-2,P.NO-123,It no-14.1.1 2023-24 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead | Each | 5936.01 | 5936.01 | 6.0 | False | None | None | False | None | False | 35616.06 | 0 | | 2606710 | 81441 | None | Vol-2,P.NO-131,It no-14.2 2023-24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid:(P-131,I No 14.2 Vol-II) ---- etc., complete with all lead | Each | 5880.11 | 5880.11 | 2.0 | False | None | None | False | None | False | 11760.22 | 0 | | 2606711 | 81441 | None | Vol-2,P.NO-122,It no-13.33.2 2023-24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20MM DIA ---- etc., complete with all lead | m | 263.74 | 263.74 | 30.0 | False | None | None | False | None | False | 7912.2 | 0 | | 2606712 | 81441 | None | Vol-2,P.NO-122,It no-13.33.3 2023-24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25MM DIA ---- etc., complete with all lead | m | 359.76 | 359.76 | 24.0 | False | None | None | False | None | False | 8634.24 | 0 | | 2606713 | 81441 | None | Vol-2,P.NO-201,It no-20.40 2023-24 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. ---- etc., complete with all lead | Each | 94.8 | 94.8 | 15.0 | False | None | None | False | None | False | 1422.0 | 0 | | 2606714 | 81441 | None | Vol-2,P.NO-130,It no-14.40.2 2023-24 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- etc., complete with all lead | Each | 602.84 | 602.84 | 4.0 | False | None | None | False | None | False | 2411.36 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 3 Upgradation of infrastructure facilities to CHC and Staff Quarters at Dudda in Hassan Taluk (Civil Works) (Slice-3) | 6258398.91 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2606715 | 81442 | None | 2023 - 24 V-III P-10 It.No.2.9 III (B) | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead - Dismantling Brick / Tile work - In cement mortar ---- etc., complete with all lead | Sqm | 719.8 | 719.8 | 201.37 | False | None | None | False | None | False | 144946.126 | 0 | | 2606716 | 81442 | None | 2023 - 24 V-I P-5 It.No.1.1 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. ---- etc., complete with all lead | Sqm | 107.38 | 107.38 | 106.9 | False | None | None | False | None | False | 11478.922 | 0 | | 2606717 | 81442 | None | 2023 - 24 V-I P-8 It.No.1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 114.66 | False | None | None | False | None | False | 13800.4776 | 0 | | 2606718 | 81442 | None | 2023 - 24 V-I P-15 It.No.2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma chine mixed, laid in layers not exceeding 150 mm thickness, well com pacted using plate vibrators, including all lead & lifts, cost of all materi als of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 126.46 | False | None | None | False | None | False | 893695.3492 | 0 | | 2606719 | 81442 | None | 2023 - 24 V-II P-60 It.No.9.12.2 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. - Size of Tile 600x600 mm ---- etc., complete with all lead | Sqm | 1351.1 | 1351.1 | 397.72 | False | None | None | False | None | False | 537359.492 | 0 | | 2606720 | 81442 | None | 2023 - 24 V-II P-60 It.No.9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 19.37 | False | None | None | False | None | False | 20319.5174 | 0 | | 2606721 | 81442 | None | 2023 - 24 V-II P-65 It.No.9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | Sqm | 1709.82 | 1709.82 | 261.47 | False | None | None | False | None | False | 447066.6354 | 0 | | 2606722 | 81442 | None | 2023 - 24 V-II P-62 It.No.9.20.2 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. - Size of Tile 600x600 mm ---- etc., complete with all lead | Sqm | 246.62 | 246.62 | 133.79 | False | None | None | False | None | False | 32995.2898 | 0 | | 2606723 | 81442 | None | 2023 - 24 V-II P-112 It.No.12.96 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame ---- etc., complete with all lead | m | 758.74 | 758.74 | 44.55 | False | None | None | False | None | False | 33801.867 | 0 | | 2606724 | 81442 | None | 2023 - 24 V-II P-100 It.No.12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.16 | False | None | None | False | None | False | 18656.272 | 0 | | 2606725 | 81442 | None | 2023 - 24 V-II P-50 It.No.8.54.2 | Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional coats
wherever required to achieve even shade and colour. Two coats as per
specifications and as per directions of Engineer in charge. ---- etc., complete with all lead | Sqm | 129.8 | 129.8 | 1296.03 | False | None | None | False | None | False | 168224.694 | 0 | | 2606726 | 81442 | None | 2023 - 24 V-II P-45 It.No.8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality
to give an even shade, after thoroughly brooming the surface to remove all
dirt, dust, mortar drops and foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour complete as per
specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 205.32 | 205.32 | 751.47 | False | None | None | False | None | False | 154291.8204 | 0 | | 2606727 | 81442 | None | 2023 - 24 V-II P-112 It.No.12.97.1 | Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. - 30 mm thickness ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 14.175 | False | None | None | False | None | False | 53591.706 | 0 | | 2606728 | 81442 | None | 2023 - 24 V-II P-110 It.No.12.90 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 7946.12 | 7946.12 | 145.11 | False | None | None | False | None | False | 1153061.4732 | 0 | | 2606729 | 81442 | None | 2023 - 24 V-II P-109 It.No.12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 4.68 | False | None | None | False | None | False | 31582.6056 | 0 | | 2606730 | 81442 | None | 2023 - 24 V-II P-48 It.No.8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 39.54 | False | None | None | False | None | False | 5365.578 | 0 | | 2606731 | 81442 | None | 2023 - 24 V-II P-46 It.No.8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour
complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 162.84 | 162.84 | 93.24 | False | None | None | False | None | False | 15183.2016 | 0 | | 2606732 | 81442 | None | SR 2018 - 19 P-27 It.No.5.30 | Providing and fixing pre cast solid cement concrete kerb stones made out of C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plastering and finishing cutting, including form work, curing, including cost of all materials, labour, hire charges of machinery, loading, unloading,
lead and lift, transportation etc., complete ---- etc., complete with all lead | m | 489.7 | 489.7 | 190.0 | False | None | None | False | None | False | 93043.0 | 0 | | 2606733 | 81442 | None | 2023 - 24 V-III P-66 It.No.8.10 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- etc., complete with all lead | Sqm | 128.62 | 128.62 | 80.94 | False | None | None | False | None | False | 10410.5028 | 0 | | 2606734 | 81442 | None | 2023 - 24 V-II P-82 It.No.11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead | Kgs | 160.48 | 160.48 | 6868.8 | False | None | None | False | None | False | 1102305.024 | 0 | | 2606735 | 81442 | None | 2023 - 24 V-II P-26 It.No.7.38 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required ---- etc., complete with all lead | Sqm | 670.24 | 670.24 | 731.2 | False | None | None | False | None | False | 490079.488 | 0 | | 2606736 | 81442 | None | 2023-24 V-I P-18, It.No.2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification. ---- etc., complete with all lead | Tonne | 105559.26 | 105559.26 | 0.48 | False | None | None | False | None | False | 50668.4448 | 0 | | 2606737 | 81442 | None | 2023 - 24 V-I P-17 It.No.2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 8074.74 | 8074.74 | 85.5 | False | None | None | False | None | False | 690390.27 | 0 | | 2606738 | 81442 | None | PWD SR 2023 - 24 V-II P-41 It.No.8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 329.22 | 329.22 | 261.47 | False | None | None | False | None | False | 86081.1534 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 3 Upgradation of infrastructure facilities to CHC and Staff Quarters at Dudda in Hassan Taluk (Water Supply & Sanitary Works) (Slice-3) | 464701.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2606739 | 81443 | None | 2023 - 24 V-II P-209 It.No. 20.123 | Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 475.54 | 475.54 | 10.0 | False | None | None | False | None | False | 4755.4 | 0 | | 2606740 | 81443 | None | 2023 - 24 V-II P-122 It.No. 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes ---- etc., complete with all lead | m | 447.22 | 447.22 | 150.0 | False | None | None | False | None | False | 67083.0 | 0 | | 2606741 | 81443 | None | 2023 - 24 V-II P-122 It.No. 13.33.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia Pipes ---- etc., complete with all lead | m | 349.28 | 349.28 | 205.0 | False | None | None | False | None | False | 71602.4 | 0 | | 2606742 | 81443 | None | 2023 - 24 V-II P-117 It.No. 13.5.3 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : - 25 mm nominal bore ---- etc., complete with all lead | Nos | 391.76 | 391.76 | 4.0 | False | None | None | False | None | False | 1567.04 | 0 | | 2606743 | 81443 | None | 2023 - 24 V-II P-117 It.No. 13.4.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : - 25 mm nominal bore ---- etc., complete with all lead | Nos | 647.82 | 647.82 | 4.0 | False | None | None | False | None | False | 2591.28 | 0 | | 2606744 | 81443 | None | BWSSB SR 2023 - 24 P- A-45 SI.No 677 | PVC pipes of 6 Kg/cm2 for 110mm(1.894) including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | m | 247.8 | 247.8 | 14.0 | False | None | None | False | None | False | 3469.2 | 0 | | 2606745 | 81443 | None | BWSSB SR 2023 - 24 P-A-45 SI.No 678 | PVC pipes of 6 Kg/cm2 for 160mm(3.923) including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | m | 523.92 | 523.92 | 100.0 | False | None | None | False | None | False | 52392.0 | 0 | | 2606746 | 81443 | None | BWSSB SR 2023 - 24 P- A-45 SI.No 674 | PVC pipes of 6 Kg/cm2 for 75mm(0.917) including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | m | 116.82 | 116.82 | 40.0 | False | None | None | False | None | False | 4672.8 | 0 | | 2606747 | 81443 | None | 2023 - 24 V-II P-132 It.No.14.7.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: - White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap ---- etc., complete with all lead | Each | 3021.98 | 3021.98 | 7.0 | False | None | None | False | None | False | 21153.86 | 0 | | 2606748 | 81443 | None | 2023 - 24 V-II P-137 It.No.14.40.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrange ment of approved quality and colour - 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- etc., complete with all lead | Each | 585.28 | 585.28 | 5.0 | False | None | None | False | None | False | 2926.4 | 0 | | 2606749 | 81443 | None | 2023 - 24 V-II P-136 It.No.14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- etc., complete with all lead | Each | 1439.6 | 1439.6 | 6.0 | False | None | None | False | None | False | 8637.6 | 0 | | 2606750 | 81443 | None | 2023 - 24 V-II P-135 It.No.14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever tel ephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead | Each | 6563.16 | 6563.16 | 5.0 | False | None | None | False | None | False | 32815.8 | 0 | | 2606751 | 81443 | None | 2023 - 24 V-II P-117 It.No.13.3.1 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 6.0 | False | None | None | False | None | False | 2116.92 | 0 | | 2606752 | 81443 | None | 2023 - 24 V-II P-117 It.No.13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore ---- etc., complete with all lead | Nos | 337.48 | 337.48 | 10.0 | False | None | None | False | None | False | 3374.8 | 0 | | 2606753 | 81443 | None | 2023 - 24 V-II P-138 It.No.14.44 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead | Each | 13244.32 | 13244.32 | 1.0 | False | None | None | False | None | False | 13244.32 | 0 | | 2606754 | 81443 | None | Approved Rate | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete with all lead | Each | 2183.0 | 2183.0 | 1.0 | False | None | None | False | None | False | 2183.0 | 0 | | 2606755 | 81443 | None | 2023 - 24 V-II P-131 It.No.14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead | Nos | 5763.12 | 5763.12 | 4.0 | False | None | None | False | None | False | 23052.48 | 0 | | 2606756 | 81443 | None | 2023 - 24 V-II P-120 It.No.13.22.1.1 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia ---- etc., complete with all lead | Nos | 48.38 | 48.38 | 10.0 | False | None | None | False | None | False | 483.8 | 0 | | 2606757 | 81443 | None | 2023 - 24 V-II P-127 It.No.13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. -do- 10cms x 7.5cms ---- etc., complete with all lead | Nos | 259.6 | 259.6 | 10.0 | False | None | None | False | None | False | 2596.0 | 0 | | 2606758 | 81443 | None | 2023 - 24 V-II P-133 It.No.14.9.1 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: - White glazed fire clay kitchen sink of size 600x450x 250 mm ---- etc., complete with all lead | Each | 3517.58 | 3517.58 | 4.0 | False | None | None | False | None | False | 14070.32 | 0 | | 2606759 | 81443 | None | 2023 - 24 V-II P-136 It.No.14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead& lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 108.56 | 108.56 | 6.0 | False | None | None | False | None | False | 651.36 | 0 | | 2606760 | 81443 | None | 2023 - 24 V-II P-118 It.No.13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead | Each | 329.22 | 329.22 | 5.0 | False | None | None | False | None | False | 1646.1 | 0 | | 2606761 | 81443 | None | 2023 - 24 V-II P-123 It.No.13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (For 2000 litre capacity) ---- etc., complete with all lead | l | 10.62 | 10.62 | 3500.0 | False | None | None | False | None | False | 37170.0 | 0 | | 2606762 | 81443 | None | 2023 - 24 V-II P-133 It.No.14.8 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- etc., complete with all lead | Each | 1679.14 | 1679.14 | 5.0 | False | None | None | False | None | False | 8395.7 | 0 | | 2606763 | 81443 | None | BWSSB SR 2023 - 24 P-191 SI.No 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame & cover ---- etc., complete with all lead | Each | 6435.72 | 6435.72 | 5.0 | False | None | None | False | None | False | 32178.6 | 0 | | 2606764 | 81443 | None | 2023 - 24 V-II P-126 It.No.13.52 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5 ---- etc., complete with all lead | Nos | 12467.88 | 12467.88 | 4.0 | False | None | None | False | None | False | 49871.52 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 3 Upgradation of infrastructure facilities to CHC and Staff Quarters at Dudda in Hassan Taluk (Electrical Works) (Slice-3) | 348812.29 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2606765 | 81444 | None | 2.2.1 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 317.42 | 317.42 | 10.0 | False | None | None | False | None | False | 3174.2 | 0 | | 2606766 | 81444 | None | 2.2.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 447.22 | 447.22 | 7.0 | False | None | None | False | None | False | 3130.54 | 0 | | 2606767 | 81444 | None | 2.2.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 654.9 | 654.9 | 5.0 | False | None | None | False | None | False | 3274.5 | 0 | | 2606768 | 81444 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way ---- etc., complete with all lead | Each | 162.84 | 162.84 | 10.0 | False | None | None | False | None | False | 1628.4 | 0 | | 2606769 | 81444 | None | 3.4.2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead | Each | 187.62 | 187.62 | 15.0 | False | None | None | False | None | False | 2814.3 | 0 | | 2606770 | 81444 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead | Each | 259.6 | 259.6 | 25.0 | False | None | None | False | None | False | 6490.0 | 0 | | 2606771 | 81444 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 10.0 | False | None | None | False | None | False | 3079.8 | 0 | | 2606772 | 81444 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 10.0 | False | None | None | False | None | False | 3764.2 | 0 | | 2606773 | 81444 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module ---- etc., complete with all lead | Each | 189.98 | 189.98 | 10.0 | False | None | None | False | None | False | 1899.8 | 0 | | 2606774 | 81444 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 15.0 | False | None | None | False | None | False | 3097.5 | 0 | | 2606775 | 81444 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 25.0 | False | None | None | False | None | False | 6903.0 | 0 | | 2606776 | 81444 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 10.0 | False | None | None | False | None | False | 3351.2 | 0 | | 2606777 | 81444 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 10.0 | False | None | None | False | None | False | 4059.2 | 0 | | 2606778 | 81444 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead | Each | 120.36 | 120.36 | 100.0 | False | None | None | False | None | False | 12036.0 | 0 | | 2606779 | 81444 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 5.0 | False | None | None | False | None | False | 979.4 | 0 | | 2606780 | 81444 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 15.0 | False | None | None | False | None | False | 6318.9 | 0 | | 2606781 | 81444 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete with all lead | Each | 212.4 | 212.4 | 10.0 | False | None | None | False | None | False | 2124.0 | 0 | | 2606782 | 81444 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 5.0 | False | None | None | False | None | False | 1923.4 | 0 | | 2606783 | 81444 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 8.0 | False | None | None | False | None | False | 2227.84 | 0 | | 2606784 | 81444 | None | I-1.13 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | No | 138.06 | 138.06 | 3.0 | False | None | None | False | None | False | 414.18 | 0 | | 2606785 | 81444 | None | 1.3.1 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 80.24 | 80.24 | 150.0 | False | None | None | False | None | False | 12036.0 | 0 | | 2606786 | 81444 | None | 1.3.2 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead | m | 93.22 | 93.22 | 100.0 | False | None | None | False | None | False | 9322.0 | 0 | | 2606787 | 81444 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 1.5 sqmm ---- etc., complete with all lead | m | 30.68 | 30.68 | 200.0 | False | None | None | False | None | False | 6136.0 | 0 | | 2606788 | 81444 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 2.5 sqmm ---- etc., complete with all lead | m | 49.56 | 49.56 | 250.0 | False | None | None | False | None | False | 12390.0 | 0 | | 2606789 | 81444 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 4 sqmm ---- etc., complete with all lead | m | 74.34 | 74.34 | 125.0 | False | None | None | False | None | False | 9292.5 | 0 | | 2606790 | 81444 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 6 sqmm ---- etc., complete with all lead | m | 108.56 | 108.56 | 50.0 | False | None | None | False | None | False | 5428.0 | 0 | | 2606791 | 81444 | None | 5.19.4 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure I- Single Door 12 Way SP & N ---- etc., complete with all lead | Each | 2198.34 | 2198.34 | 11.0 | False | None | None | False | None | False | 24181.74 | 0 | | 2606792 | 81444 | None | 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead | Each | 489.7 | 489.7 | 10.0 | False | None | None | False | None | False | 4897.0 | 0 | | 2606793 | 81444 | None | 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 5.0 | False | None | None | False | None | False | 4360.1 | 0 | | 2606794 | 81444 | None | S.R 2022-23 5.20.3 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete with all lead | Each | 3334.68 | 3334.68 | 2.0 | False | None | None | False | None | False | 6669.36 | 0 | | 2606795 | 81444 | None | I-32.07 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
3.5 core 25 sqmm ---- etc., complete with all lead | Km | 164667.82 | 164667.82 | 0.1 | False | None | None | False | None | False | 16466.782 | 0 | | 2606796 | 81444 | None | I-21.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using
Wooden/Aluminum Rollers as directed by the departmental staff LT cable 2.5 to 25 Sqmm ---- etc., complete with all lead | Km | 24645.48 | 24645.48 | 0.1 | False | None | None | False | None | False | 2464.548 | 0 | | 2606797 | 81444 | None | SR 19-20-6.11.3 | Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete with all lead | Each | 138.06 | 138.06 | 4.0 | False | None | None | False | None | False | 552.24 | 0 | | 2606798 | 81444 | None | S.R 2019-20 6.9.3 | Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 65mm ---- etc., complete with all lead | m | 667.88 | 667.88 | 5.0 | False | None | None | False | None | False | 3339.4 | 0 | | 2606799 | 81444 | None | SR 19-20-6.17.12 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120 sqmm Long Barrel ---- etc., complete with all lead | Each | 224.2 | 224.2 | 5.0 | False | None | None | False | None | False | 1121.0 | 0 | | 2606800 | 81444 | None | BSR-29.03 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed In soil (hard) ---- etc., complete with all lead | Cum | 459.02 | 459.02 | 45.0 | False | None | None | False | None | False | 20655.9 | 0 | | 2606801 | 81444 | None | I-12.57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead | No | 5022.08 | 5022.08 | 3.0 | False | None | None | False | None | False | 15066.24 | 0 | | 2606802 | 81444 | None | SR 19-20-6.18.4 | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc., 12 SWG Copper wire. ---- etc., complete with all lead | Per Mtr | 68.44 | 68.44 | 10.0 | False | None | None | False | None | False | 684.4 | 0 | | 2606803 | 81444 | None | 12.58.2 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead | Mtr | 96.76 | 96.76 | 10.0 | False | None | None | False | None | False | 967.6 | 0 | | 2606804 | 81444 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete16SWG ---- etc., complete with all lead& lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 40000.0 | False | None | None | False | None | False | 20400.0 | 0 | | 2606805 | 81444 | None | 11.3.2 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 40.0 | False | None | None | False | None | False | 32568.0 | 0 | | 2606806 | 81444 | None | I-12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead | Each | 74.34 | 74.34 | 40.0 | False | None | None | False | None | False | 2973.6 | 0 | | 2606807 | 81444 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 4.0 | False | None | None | False | None | False | 7042.24 | 0 | | 2606808 | 81444 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 2606809 | 81444 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 40.0 | False | None | None | False | None | False | 5758.4 | 0 | | 2606810 | 81444 | None | I-13.10 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulatedtwin twisted copper wire and wiring. ---- etc., complete with all lead | Each | 201.78 | 201.78 | 12.0 | False | None | None | False | None | False | 2421.36 | 0 | | 2606811 | 81444 | None | I-13.13 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 8.0 | False | None | None | False | None | False | 6674.08 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 4 Construction of Doctors, Nurses and Group D Quarters to CHC at HalliMysuru in Holenarasipura Taluk, Hassan District. (Civil Works) (Slice-4) | 22290200.47 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2606812 | 81445 | None | I-2.5A P-7 V-3 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle ---- etc., complete with all lead | Sqm | 463.74 | 463.74 | 8.84 | False | None | None | False | None | False | 4099.4616 | 0 | | 2606813 | 81445 | None | I-1.12 P-8 V-1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 246.36 | False | None | None | False | None | False | 27616.956 | 0 | | 2606814 | 81445 | None | I-1.14.1 P-8 V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 540.41 | False | None | None | False | None | False | 65043.7476 | 0 | | 2606815 | 81445 | None | I-1.15.1 P-8 V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead | Cum | 428.34 | 428.34 | 107.68 | False | None | None | False | None | False | 46123.6512 | 0 | | 2606816 | 81445 | None | I-1.1A P-3 V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum ---- etc., complete with all lead | Cum | 159.3 | 159.3 | 904.1 | False | None | None | False | None | False | 144023.13 | 0 | | 2606817 | 81445 | None | I-4.1 P-5 V-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 266.1 | False | None | None | False | None | False | 37051.764 | 0 | | 2606818 | 81445 | None | I-1.9 P-7 V-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 313.88 | 313.88 | 466.29 | False | None | None | False | None | False | 146359.1052 | 0 | | 2606819 | 81445 | None | I-1.8 P-7 V-1 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead | Cum | 559.32 | 559.32 | 216.26 | False | None | None | False | None | False | 120958.5432 | 0 | | 2606820 | 81445 | None | I-2.1.3 P-15 V-1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork ---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 63.44 | False | None | None | False | None | False | 448331.7488 | 0 | | 2606821 | 81445 | None | I-2.2.3 P-15 V-1 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork Footings ---- etc., complete with all lead | Cum | 8074.6 | 8074.6 | 99.66 | False | None | None | False | None | False | 804714.636 | 0 | | 2606822 | 81445 | None | I-2.2.3 P-15 V-1 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork PEDESTALS ---- etc., complete with all lead | Cum | 8224.13 | 8224.13 | 5.15 | False | None | None | False | None | False | 42354.2695 | 0 | | 2606823 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS GF ---- etc., complete with all lead | Cum | 13727.06 | 13727.06 | 21.01 | False | None | None | False | None | False | 288405.5306 | 0 | | 2606824 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS FF ---- etc., complete with all lead | Cum | 13864.33 | 13864.33 | 11.22 | False | None | None | False | None | False | 155557.7826 | 0 | | 2606825 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS SF ---- etc., complete with all lead | Cum | 14001.6 | 14001.6 | 7.53 | False | None | None | False | None | False | 105432.048 | 0 | | 2606826 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS TF ---- etc., complete with all lead | Cum | 14138.87 | 14138.87 | 4.2 | False | None | None | False | None | False | 59383.254 | 0 | | 2606827 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork COLUMNS Tereace Floor ---- etc., complete with all lead | Cum | 14276.14 | 14276.14 | 3.29 | False | None | None | False | None | False | 46968.5006 | 0 | | 2606828 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork PLINTH BEAM, RCC SLAB, STAIRCASE GF ---- etc., complete with all lead | Cum | 12112.11 | 12112.11 | 85.4 | False | None | None | False | None | False | 1034374.194 | 0 | | 2606829 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC SLAB, STAIRCASE FF ---- etc., complete with all lead | Cum | 12233.24 | 12233.24 | 43.69 | False | None | None | False | None | False | 534470.2556 | 0 | | 2606830 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC SLAB, STAIRCASE SF ---- etc., complete with all lead | Cum | 12354.35 | 12354.35 | 17.03 | False | None | None | False | None | False | 210394.5805 | 0 | | 2606831 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC SLAB, STAIRCASE TF ---- etc., complete with all lead | Cum | 12475.48 | 12475.48 | 14.57 | False | None | None | False | None | False | 181767.7436 | 0 | | 2606832 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC SLAB, STAIRCASE Terrace Floor ---- etc., complete with all lead | Cum | 12596.59 | 12596.59 | 2.46 | False | None | None | False | None | False | 30987.6114 | 0 | | 2606833 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS, LINTELS GF ---- etc., complete with all lead | Cum | 12919.58 | 12919.58 | 35.81 | False | None | None | False | None | False | 462650.1598 | 0 | | 2606834 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS, LINTELS FF ---- etc., complete with all lead | Cum | 13048.78 | 13048.78 | 28.44 | False | None | None | False | None | False | 371107.3032 | 0 | | 2606835 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS, LINTELS SF ---- etc., complete with all lead | Cum | 13177.98 | 13177.98 | 12.11 | False | None | None | False | None | False | 159585.3378 | 0 | | 2606836 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS, LINTELS TF ---- etc., complete with all lead | Cum | 13307.17 | 13307.17 | 9.96 | False | None | None | False | None | False | 132539.4132 | 0 | | 2606837 | 81445 | None | I-2.5.2 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork RCC BEAMS, LINTELS Terrace Floor ---- etc., complete with all lead | Cum | 13436.37 | 13436.37 | 2.15 | False | None | None | False | None | False | 28888.1955 | 0 | | 2606838 | 81445 | None | I-2.5.1 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork GF ---- etc., complete with all lead | Cum | 11343.93 | 11343.93 | 4.64 | False | None | None | False | None | False | 52635.8352 | 0 | | 2606839 | 81445 | None | I-2.5.1 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork FF ---- etc., complete with all lead | Cum | 11457.38 | 11457.38 | 4.64 | False | None | None | False | None | False | 53162.2432 | 0 | | 2606840 | 81445 | None | I-2.5.1 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork SF ---- etc., complete with all lead | Cum | 11570.81 | 11570.81 | 1.86 | False | None | None | False | None | False | 21521.7066 | 0 | | 2606841 | 81445 | None | I-2.5.1 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork TF ---- etc., complete with all lead | Cum | 11684.25 | 11684.25 | 1.72 | False | None | None | False | None | False | 20096.91 | 0 | | 2606842 | 81445 | None | I-2.5.1 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork Terrace Floor ---- etc., complete with all lead | Cum | 11797.69 | 11797.69 | 0.14 | False | None | None | False | None | False | 1651.6766 | 0 | | 2606843 | 81445 | None | I-8.16 a P-43 V-2 | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. GF ---- etc., complete with all lead | Sqm | 1460.84 | 1460.84 | 10.89 | False | None | None | False | None | False | 15908.5476 | 0 | | 2606844 | 81445 | None | I-2.11 a P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. GF ---- etc., complete with all lead | Tonne | 105559.26 | 105559.26 | 29.2 | False | None | None | False | None | False | 3082330.392 | 0 | | 2606845 | 81445 | None | I-2.11 a P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. FF ---- etc., complete with all lead | Tonne | 106614.85 | 106614.85 | 12.03 | False | None | None | False | None | False | 1282576.6455 | 0 | | 2606846 | 81445 | None | I-2.11 a P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SF ---- etc., complete with all lead | Tonne | 107670.45 | 107670.45 | 5.24 | False | None | None | False | None | False | 564193.158 | 0 | | 2606847 | 81445 | None | I-2.11 a P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. TF ---- etc., complete with all lead | Tonne | 108726.04 | 108726.04 | 4.23 | False | None | None | False | None | False | 459911.1492 | 0 | | 2606848 | 81445 | None | I-2.11 a P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Terrace Floor ---- etc., complete with all lead | Tonne | 109781.63 | 109781.63 | 0.96 | False | None | None | False | None | False | 105390.3648 | 0 | | 2606849 | 81445 | None | I-4.21 P-15 2018-19 S.R | Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. GF ---- etc., complete with all lead | Rmtr | 38.94 | 38.94 | 257.2 | False | None | None | False | None | False | 10015.368 | 0 | | 2606850 | 81445 | None | Approved Rate | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. GF ---- etc., complete with all lead | Rmtr | 86.14 | 86.14 | 274.4 | False | None | None | False | None | False | 23636.816 | 0 | | 2606851 | 81445 | None | I-5.4 P-9 V-2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 8.73 | False | None | None | False | None | False | 65815.6446 | 0 | | 2606852 | 81445 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete with all lead | Sqm | 1545.8 | 1545.8 | 422.25 | False | None | None | False | None | False | 652714.05 | 0 | | 2606853 | 81445 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1561.26 | 1561.26 | 422.25 | False | None | None | False | None | False | 659242.035 | 0 | | 2606854 | 81445 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SF ---- etc., complete with all lead | Sqm | 1576.72 | 1576.72 | 275.55 | False | None | None | False | None | False | 434465.196 | 0 | | 2606855 | 81445 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. TF ---- etc., complete with all lead | Sqm | 1592.17 | 1592.17 | 162.69 | False | None | None | False | None | False | 259030.1373 | 0 | | 2606856 | 81445 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Terrace Floor ---- etc., complete with all lead | Sqm | 1607.63 | 1607.63 | 112.86 | False | None | None | False | None | False | 181437.1218 | 0 | | 2606857 | 81445 | None | I-6.34 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete with all lead | Sqm | 1302.72 | 1302.72 | 53.81 | False | None | None | False | None | False | 70099.3632 | 0 | | 2606858 | 81445 | None | I-6.34 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1315.75 | 1315.75 | 53.81 | False | None | None | False | None | False | 70800.5075 | 0 | | 2606859 | 81445 | None | I-6.34 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SF ---- etc., complete with all lead | Sqm | 1328.77 | 1328.77 | 13.35 | False | None | None | False | None | False | 17739.0795 | 0 | | 2606860 | 81445 | None | I-6.34 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. TF ---- etc., complete with all lead | Sqm | 1341.8 | 1341.8 | 13.35 | False | None | None | False | None | False | 17913.03 | 0 | | 2606861 | 81445 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. GF ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.57 | False | None | None | False | None | False | 66462.969 | 0 | | 2606862 | 81445 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. FF ---- etc., complete with all lead | Cum | 117767.72 | 117767.72 | 0.57 | False | None | None | False | None | False | 67127.6004 | 0 | | 2606863 | 81445 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. SF ---- etc., complete with all lead | Cum | 118933.73 | 118933.73 | 0.19 | False | None | None | False | None | False | 22597.4087 | 0 | | 2606864 | 81445 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. TF ---- etc., complete with all lead | Cum | 120099.75 | 120099.75 | 0.19 | False | None | None | False | None | False | 22818.9525 | 0 | | 2606865 | 81445 | None | I-12.51 P-105 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. GF ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 9.0 | False | None | None | False | None | False | 10789.92 | 0 | | 2606866 | 81445 | None | I-12.51 P-105 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF ---- etc., complete with all lead | Nos | 1210.87 | 1210.87 | 9.0 | False | None | None | False | None | False | 10897.83 | 0 | | 2606867 | 81445 | None | I-12.51 P-105 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. SF ---- etc., complete with all lead | Nos | 1222.86 | 1222.86 | 3.0 | False | None | None | False | None | False | 3668.58 | 0 | | 2606868 | 81445 | None | I-12.51 P-105 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. TF ---- etc., complete with all lead | Nos | 1234.85 | 1234.85 | 3.0 | False | None | None | False | None | False | 3704.55 | 0 | | 2606869 | 81445 | None | I-22.15.2 P-218 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 300mm GF ---- etc., complete with all lead | No | 649.0 | 649.0 | 18.0 | False | None | None | False | None | False | 11682.0 | 0 | | 2606870 | 81445 | None | I-22.15.2 P-218 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 300mm FF ---- etc., complete with all lead | No | 655.49 | 655.49 | 18.0 | False | None | None | False | None | False | 11798.82 | 0 | | 2606871 | 81445 | None | I-22.15.2 P-218 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 300mm SF ---- etc., complete with all lead | No | 661.98 | 661.98 | 6.0 | False | None | None | False | None | False | 3971.88 | 0 | | 2606872 | 81445 | None | I-22.15.2 P-218 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 300mm TF ---- etc., complete with all lead | No | 668.47 | 668.47 | 6.0 | False | None | None | False | None | False | 4010.82 | 0 | | 2606873 | 81445 | None | I-22.15.4 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm GF ---- etc., complete with all lead | No | 442.5 | 442.5 | 9.0 | False | None | None | False | None | False | 3982.5 | 0 | | 2606874 | 81445 | None | I-22.15.4 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm FF ---- etc., complete with all lead | No | 446.93 | 446.93 | 9.0 | False | None | None | False | None | False | 4022.37 | 0 | | 2606875 | 81445 | None | I-22.15.4 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm SF ---- etc., complete with all lead | No | 451.35 | 451.35 | 3.0 | False | None | None | False | None | False | 1354.05 | 0 | | 2606876 | 81445 | None | I-22.15.4 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm TF ---- etc., complete with all lead | No | 455.78 | 455.78 | 3.0 | False | None | None | False | None | False | 1367.34 | 0 | | 2606877 | 81445 | None | I-22.15.6 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm GF ---- etc., complete with all lead | No | 177.0 | 177.0 | 18.0 | False | None | None | False | None | False | 3186.0 | 0 | | 2606878 | 81445 | None | I-22.15.6 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm FF ---- etc., complete with all lead | No | 178.77 | 178.77 | 18.0 | False | None | None | False | None | False | 3217.86 | 0 | | 2606879 | 81445 | None | I-22.15.6 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm SF ---- etc., complete with all lead | No | 180.54 | 180.54 | 6.0 | False | None | None | False | None | False | 1083.24 | 0 | | 2606880 | 81445 | None | I-22.15.6 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm TF ---- etc., complete with all lead | No | 182.31 | 182.31 | 6.0 | False | None | None | False | None | False | 1093.86 | 0 | | 2606881 | 81445 | None | I-22.15.9 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm GF ---- etc., complete with all lead | No | 82.6 | 82.6 | 36.0 | False | None | None | False | None | False | 2973.6 | 0 | | 2606882 | 81445 | None | I-22.15.9 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm FF ---- etc., complete with all lead | No | 83.43 | 83.43 | 36.0 | False | None | None | False | None | False | 3003.48 | 0 | | 2606883 | 81445 | None | I-22.15.9 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm SF ---- etc., complete with all lead | No | 84.25 | 84.25 | 12.0 | False | None | None | False | None | False | 1011.0 | 0 | | 2606884 | 81445 | None | I-22.15.9 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm TF ---- etc., complete with all lead | No | 85.08 | 85.08 | 12.0 | False | None | None | False | None | False | 1020.96 | 0 | | 2606885 | 81445 | None | I-22.15.10 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm GF ---- etc., complete with all lead | No | 118.0 | 118.0 | 9.0 | False | None | None | False | None | False | 1062.0 | 0 | | 2606886 | 81445 | None | I-22.15.10 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm FF ---- etc., complete with all lead | No | 119.18 | 119.18 | 9.0 | False | None | None | False | None | False | 1072.62 | 0 | | 2606887 | 81445 | None | I-22.15.10 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm SF ---- etc., complete with all lead | No | 120.36 | 120.36 | 3.0 | False | None | None | False | None | False | 361.08 | 0 | | 2606888 | 81445 | None | I-22.15.10 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm TF ---- etc., complete with all lead | No | 121.54 | 121.54 | 3.0 | False | None | None | False | None | False | 364.62 | 0 | | 2606889 | 81445 | None | I-12.60 P-105 V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. GF ---- etc., complete with all lead | No | 1241.36 | 1241.36 | 9.0 | False | None | None | False | None | False | 11172.24 | 0 | | 2606890 | 81445 | None | I-12.60 P-105 V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. FF ---- etc., complete with all lead | No | 1253.77 | 1253.77 | 9.0 | False | None | None | False | None | False | 11283.93 | 0 | | 2606891 | 81445 | None | I-12.60 P-105 V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. SF ---- etc., complete with all lead | No | 1266.19 | 1266.19 | 3.0 | False | None | None | False | None | False | 3798.57 | 0 | | 2606892 | 81445 | None | I-12.60 P-105 V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. TF ---- etc., complete with all lead | No | 1278.6 | 1278.6 | 3.0 | False | None | None | False | None | False | 3835.8 | 0 | | 2606893 | 81445 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm GF ---- etc., complete with all lead | No | 70.8 | 70.8 | 54.0 | False | None | None | False | None | False | 3823.2 | 0 | | 2606894 | 81445 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF ---- etc., complete with all lead | No | 71.51 | 71.51 | 54.0 | False | None | None | False | None | False | 3861.54 | 0 | | 2606895 | 81445 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm SF ---- etc., complete with all lead | No | 72.22 | 72.22 | 18.0 | False | None | None | False | None | False | 1299.96 | 0 | | 2606896 | 81445 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm TF ---- etc., complete with all lead | No | 72.92 | 72.92 | 18.0 | False | None | None | False | None | False | 1312.56 | 0 | | 2606897 | 81445 | None | I-20.79 P-205 V-2 | Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. GF ---- etc., complete with all lead | m | 61.36 | 61.36 | 46.8 | False | None | None | False | None | False | 2871.648 | 0 | | 2606898 | 81445 | None | I-20.79 P-205 V-2 | Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead | m | 61.97 | 61.97 | 46.8 | False | None | None | False | None | False | 2900.196 | 0 | | 2606899 | 81445 | None | I-20.79 P-205 V-2 | Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. SF ---- etc., complete with all lead | m | 62.59 | 62.59 | 15.6 | False | None | None | False | None | False | 976.404 | 0 | | 2606900 | 81445 | None | I-20.79 P-205 V-2 | Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. TF ---- etc., complete with all lead | m | 63.2 | 63.2 | 15.6 | False | None | None | False | None | False | 985.92 | 0 | | 2606901 | 81445 | None | I-12.57.6 P-105 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial GF ---- etc., complete with all lead | Sqm | 3919.96 | 3919.96 | 18.9 | False | None | None | False | None | False | 74087.244 | 0 | | 2606902 | 81445 | None | I-12.57.6 P-105 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial FF ---- etc., complete with all lead | Sqm | 3959.16 | 3959.16 | 18.9 | False | None | None | False | None | False | 74828.124 | 0 | | 2606903 | 81445 | None | I-12.57.6 P-105 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial SF ---- etc., complete with all lead | Sqm | 3998.36 | 3998.36 | 6.3 | False | None | None | False | None | False | 25189.668 | 0 | | 2606904 | 81445 | None | I-12.57.6 P-105 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial TF ---- etc., complete with all lead | Sqm | 4037.56 | 4037.56 | 6.3 | False | None | None | False | None | False | 25436.628 | 0 | | 2606905 | 81445 | None | I-12.90 I-110 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall
be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF ---- etc., complete with all lead | Sqm | 7946.12 | 7946.12 | 22.14 | False | None | None | False | None | False | 175927.0968 | 0 | | 2606906 | 81445 | None | I-12.90 I-110 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall
be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc., complete with all lead | Sqm | 8025.58 | 8025.58 | 22.14 | False | None | None | False | None | False | 177686.3412 | 0 | | 2606907 | 81445 | None | I-12.90 I-110 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall
be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SF ---- etc., complete with all lead | Sqm | 8105.04 | 8105.04 | 9.69 | False | None | None | False | None | False | 78537.8376 | 0 | | 2606908 | 81445 | None | I-12.90 I-110 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall
be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) TF ---- etc., complete with all lead | Sqm | 8184.5 | 8184.5 | 8.34 | False | None | None | False | None | False | 68258.73 | 0 | | 2606909 | 81445 | None | I-12.90 I-110 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall
be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Terrace Floor ---- etc., complete with all lead | Sqm | 8263.96 | 8263.96 | 1.35 | False | None | None | False | None | False | 11156.346 | 0 | | 2606910 | 81445 | None | I-12.85 P-109 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 3.24 | False | None | None | False | None | False | 21864.8808 | 0 | | 2606911 | 81445 | None | I-12.85 P-109 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc., complete with all lead | Sqm | 6815.9 | 6815.9 | 3.24 | False | None | None | False | None | False | 22083.516 | 0 | | 2606912 | 81445 | None | I-12.85 P-109 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SF ---- etc., complete with all lead | Sqm | 6883.39 | 6883.39 | 1.08 | False | None | None | False | None | False | 7434.0612 | 0 | | 2606913 | 81445 | None | I-12.85 P-109 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) TF ---- etc., complete with all lead | Sqm | 6950.87 | 6950.87 | 1.08 | False | None | None | False | None | False | 7506.9396 | 0 | | 2606914 | 81445 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GF ---- etc., complete with all lead | Kg | 198.24 | 198.24 | 532.98 | False | None | None | False | None | False | 105657.9552 | 0 | | 2606915 | 81445 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF ---- etc., complete with all lead | Kg | 200.22 | 200.22 | 532.98 | False | None | None | False | None | False | 106713.2556 | 0 | | 2606916 | 81445 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SF ---- etc., complete with all lead | Kg | 202.2 | 202.2 | 226.17 | False | None | None | False | None | False | 45731.574 | 0 | | 2606917 | 81445 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding TF ---- etc., complete with all lead | Kg | 204.19 | 204.19 | 197.82 | False | None | None | False | None | False | 40392.8658 | 0 | | 2606918 | 81445 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Terrace Floor ---- etc., complete with all lead | Kg | 206.17 | 206.17 | 28.35 | False | None | None | False | None | False | 5844.9195 | 0 | | 2606919 | 81445 | None | I-12.93.1 P-111 V-2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm GF ---- etc., complete with all lead | m | 828.36 | 828.36 | 35.0 | False | None | None | False | None | False | 28992.6 | 0 | | 2606920 | 81445 | None | I-12.93.1 P-111 V-2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm FF ---- etc., complete with all lead | m | 836.64 | 836.64 | 35.0 | False | None | None | False | None | False | 29282.4 | 0 | | 2606921 | 81445 | None | I-12.93.1 P-111 V-2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm SF ---- etc., complete with all lead | m | 844.93 | 844.93 | 10.0 | False | None | None | False | None | False | 8449.3 | 0 | | 2606922 | 81445 | None | I-12.93.1 P-111 V-2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm TF ---- etc., complete with all lead | m | 853.21 | 853.21 | 10.0 | False | None | None | False | None | False | 8532.1 | 0 | | 2606923 | 81445 | None | I-12.94.1 P-112 V-2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness GF ---- etc., complete with all lead | Sqm | 4112.3 | 4112.3 | 11.76 | False | None | None | False | None | False | 48360.648 | 0 | | 2606924 | 81445 | None | I-12.94.1 P-112 V-2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness FF ---- etc., complete with all lead | Sqm | 4153.42 | 4153.42 | 11.76 | False | None | None | False | None | False | 48844.2192 | 0 | | 2606925 | 81445 | None | I-12.94.1 P-112 V-2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness SF ---- etc., complete with all lead | Sqm | 4194.55 | 4194.55 | 3.36 | False | None | None | False | None | False | 14093.688 | 0 | | 2606926 | 81445 | None | I-12.94.1 P-112 V-2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness TF ---- etc., complete with all lead | Sqm | 4235.67 | 4235.67 | 3.36 | False | None | None | False | None | False | 14231.8512 | 0 | | 2606927 | 81445 | None | I-12.59 P-107 V-2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. GF ---- etc., complete with all lead | No | 1314.52 | 1314.52 | 16.0 | False | None | None | False | None | False | 21032.32 | 0 | | 2606928 | 81445 | None | I-12.59 P-107 V-2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. FF ---- etc., complete with all lead | No | 1327.67 | 1327.67 | 16.0 | False | None | None | False | None | False | 21242.72 | 0 | | 2606929 | 81445 | None | I-12.59 P-107 V-2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. SF ---- etc., complete with all lead | No | 1340.81 | 1340.81 | 5.0 | False | None | None | False | None | False | 6704.05 | 0 | | 2606930 | 81445 | None | I-8.4.2 P-41 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) GF ---- etc., complete with all lead | Sqm | 368.16 | 368.16 | 553.09 | False | None | None | False | None | False | 203625.6144 | 0 | | 2606931 | 81445 | None | I-8.4.2 P-41 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) FF ---- etc., complete with all lead | Sqm | 371.84 | 371.84 | 541.13 | False | None | None | False | None | False | 201213.7792 | 0 | | 2606932 | 81445 | None | I-8.4.2 P-41 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) SF ---- etc., complete with all lead | Sqm | 375.52 | 375.52 | 226.78 | False | None | None | False | None | False | 85160.4256 | 0 | | 2606933 | 81445 | None | I-8.4.2 P-41 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) TF ---- etc., complete with all lead | Sqm | 379.2 | 379.2 | 178.72 | False | None | None | False | None | False | 67770.624 | 0 | | 2606934 | 81445 | None | I-8.4.2 P-41 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) Terrace Floor ---- etc., complete with all lead | Sqm | 382.89 | 382.89 | 48.06 | False | None | None | False | None | False | 18401.6934 | 0 | | 2606935 | 81445 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 519.0 | False | None | None | False | None | False | 129220.62 | 0 | | 2606936 | 81445 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 251.47 | 251.47 | 519.0 | False | None | None | False | None | False | 130512.93 | 0 | | 2606937 | 81445 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 253.96 | 253.96 | 209.13 | False | None | None | False | None | False | 53110.6548 | 0 | | 2606938 | 81445 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 256.45 | 256.45 | 171.37 | False | None | None | False | None | False | 43947.8365 | 0 | | 2606939 | 81445 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor ---- etc., complete with all lead | Sqm | 258.94 | 258.94 | 37.76 | False | None | None | False | None | False | 9777.5744 | 0 | | 2606940 | 81445 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GF ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 1060.12 | False | None | None | False | None | False | 125094.16 | 0 | | 2606941 | 81445 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF ---- etc., complete with all lead | Sqm | 119.18 | 119.18 | 1060.1 | False | None | None | False | None | False | 126342.718 | 0 | | 2606942 | 81445 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. SF ---- etc., complete with all lead | Sqm | 120.36 | 120.36 | 435.9 | False | None | None | False | None | False | 52464.924 | 0 | | 2606943 | 81445 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. TF ---- etc., complete with all lead | Sqm | 121.54 | 121.54 | 350.1 | False | None | None | False | None | False | 42551.154 | 0 | | 2606944 | 81445 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Terrace Floor ---- etc., complete with all lead | Sqm | 122.72 | 122.72 | 85.8 | False | None | None | False | None | False | 10529.376 | 0 | | 2606945 | 81445 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) GF ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 327.06 | False | None | None | False | None | False | 134689.8492 | 0 | | 2606946 | 81445 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) FF ---- etc., complete with all lead | Sqm | 415.94 | 415.94 | 327.06 | False | None | None | False | None | False | 136037.3364 | 0 | | 2606947 | 81445 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) SF ---- etc., complete with all lead | Sqm | 420.06 | 420.06 | 292.92 | False | None | None | False | None | False | 123043.9752 | 0 | | 2606948 | 81445 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) TF ---- etc., complete with all lead | Sqm | 424.17 | 424.17 | 126.06 | False | None | None | False | None | False | 53470.8702 | 0 | | 2606949 | 81445 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) Terrace Floor ---- etc., complete with all lead | Sqm | 428.29 | 428.29 | 166.86 | False | None | None | False | None | False | 71464.4694 | 0 | | 2606950 | 81445 | None | I-8.3.1 P-41 V-2 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 417.72 | 417.72 | 122.38 | False | None | None | False | None | False | 51120.5736 | 0 | | 2606951 | 81445 | None | I-8.3.1 P-41 V-2 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 421.9 | 421.9 | 29.86 | False | None | None | False | None | False | 12597.934 | 0 | | 2606952 | 81445 | None | I-8.3.1 P-41 V-2 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 426.07 | 426.07 | 14.93 | False | None | None | False | None | False | 6361.2251 | 0 | | 2606953 | 81445 | None | I-8.3.1 P-41 V-2 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 430.25 | 430.25 | 14.93 | False | None | None | False | None | False | 6423.6325 | 0 | | 2606954 | 81445 | None | I-8.16.2 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide GF ---- etc., complete with all lead | Rmtr | 44.84 | 44.84 | 624.0 | False | None | None | False | None | False | 27980.16 | 0 | | 2606955 | 81445 | None | I-8.16.2 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide FF ---- etc., complete with all lead | Rmtr | 45.29 | 45.29 | 624.0 | False | None | None | False | None | False | 28260.96 | 0 | | 2606956 | 81445 | None | I-8.16.2 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide SF ---- etc., complete with all lead | Rmtr | 45.74 | 45.74 | 312.0 | False | None | None | False | None | False | 14270.88 | 0 | | 2606957 | 81445 | None | I-8.16.2 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide TF ---- etc., complete with all lead | Rmtr | 46.19 | 46.19 | 312.0 | False | None | None | False | None | False | 14411.28 | 0 | | 2606958 | 81445 | None | I-10.5.2 P-69 2018-19 S.R | Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 120.0 | False | None | None | False | None | False | 33984.0 | 0 | | 2606959 | 81445 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. GF ---- etc., complete with all lead | Rmtr | 61.36 | 61.36 | 466.18 | False | None | None | False | None | False | 28604.8048 | 0 | | 2606960 | 81445 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. FF ---- etc., complete with all lead | Rmtr | 61.97 | 61.97 | 466.18 | False | None | None | False | None | False | 28889.1746 | 0 | | 2606961 | 81445 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. SF ---- etc., complete with all lead | Rmtr | 62.59 | 62.59 | 184.0 | False | None | None | False | None | False | 11516.56 | 0 | | 2606962 | 81445 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. TF ---- etc., complete with all lead | Rmtr | 63.2 | 63.2 | 184.0 | False | None | None | False | None | False | 11628.8 | 0 | | 2606963 | 81445 | None | I-9.17.2 P-61 V-2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm GF ---- etc., complete with all lead | Sqm | 1386.5 | 1386.5 | 176.82 | False | None | None | False | None | False | 245160.93 | 0 | | 2606964 | 81445 | None | I-9.17.2 P-61 V-2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm FF ---- etc., complete with all lead | Sqm | 1400.37 | 1400.37 | 176.82 | False | None | None | False | None | False | 247613.4234 | 0 | | 2606965 | 81445 | None | I-9.17.2 P-61 V-2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm SF ---- etc., complete with all lead | Sqm | 1414.23 | 1414.23 | 53.88 | False | None | None | False | None | False | 76198.7124 | 0 | | 2606966 | 81445 | None | I-9.17.2 P-61 V-2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm TF ---- etc., complete with all lead | Sqm | 1428.1 | 1428.1 | 53.88 | False | None | None | False | None | False | 76946.028 | 0 | | 2606967 | 81445 | None | I-9.32 P-64 V-2 | Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. GF ---- etc., complete with all lead | Sqm | 3046.76 | 3046.76 | 23.57 | False | None | None | False | None | False | 71812.1332 | 0 | | 2606968 | 81445 | None | I-9.32 P-64 V-2 | Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. FF ---- etc., complete with all lead | Sqm | 3077.23 | 3077.23 | 26.58 | False | None | None | False | None | False | 81792.7734 | 0 | | 2606969 | 81445 | None | I-9.32 P-64 V-2 | Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. SF ---- etc., complete with all lead | Sqm | 3107.7 | 3107.7 | 7.5 | False | None | None | False | None | False | 23307.75 | 0 | | 2606970 | 81445 | None | I-9.32 P-64 V-2 | Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. TF ---- etc., complete with all lead | Sqm | 3138.16 | 3138.16 | 7.5 | False | None | None | False | None | False | 23536.2 | 0 | | 2606971 | 81445 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 81.73 | False | None | None | False | None | False | 28450.213 | 0 | | 2606972 | 81445 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 351.58 | 351.58 | 81.73 | False | None | None | False | None | False | 28734.6334 | 0 | | 2606973 | 81445 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 355.06 | 355.06 | 28.37 | False | None | None | False | None | False | 10073.0522 | 0 | | 2606974 | 81445 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 358.54 | 358.54 | 28.37 | False | None | None | False | None | False | 10171.7798 | 0 | | 2606975 | 81445 | None | I-15.7 P-150 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) GF ---- etc., complete with all lead | Sqm | 725.7 | 725.7 | 17.86 | False | None | None | False | None | False | 12961.002 | 0 | | 2606976 | 81445 | None | I-15.7 P-150 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) FF ---- etc., complete with all lead | Sqm | 732.96 | 732.96 | 17.86 | False | None | None | False | None | False | 13090.6656 | 0 | | 2606977 | 81445 | None | I-15.7 P-150 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) SF ---- etc., complete with all lead | Sqm | 740.21 | 740.21 | 5.29 | False | None | None | False | None | False | 3915.7109 | 0 | | 2606978 | 81445 | None | I-15.7 P-150 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) TF ---- etc., complete with all lead | Sqm | 747.47 | 747.47 | 5.29 | False | None | None | False | None | False | 3954.1163 | 0 | | 2606979 | 81445 | None | I-9.11 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. GF ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 22.2 | False | None | None | False | None | False | 23288.244 | 0 | | 2606980 | 81445 | None | I-9.11 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. FF ---- etc., complete with all lead | Sqm | 1059.51 | 1059.51 | 22.2 | False | None | None | False | None | False | 23521.122 | 0 | | 2606981 | 81445 | None | I-9.11 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. SF ---- etc., complete with all lead | Sqm | 1070.0 | 1070.0 | 5.29 | False | None | None | False | None | False | 5660.3 | 0 | | 2606982 | 81445 | None | I-9.11 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. TF ---- etc., complete with all lead | Sqm | 1080.49 | 1080.49 | 5.29 | False | None | None | False | None | False | 5715.7921 | 0 | | 2606983 | 81445 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. GF ---- etc., complete with all lead | Sqm | 1709.82 | 1709.82 | 81.73 | False | None | None | False | None | False | 139743.5886 | 0 | | 2606984 | 81445 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1726.92 | 1726.92 | 81.73 | False | None | None | False | None | False | 141141.1716 | 0 | | 2606985 | 81445 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SF ---- etc., complete with all lead | Sqm | 1744.02 | 1744.02 | 28.37 | False | None | None | False | None | False | 49477.8474 | 0 | | 2606986 | 81445 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. TF ---- etc., complete with all lead | Sqm | 1761.11 | 1761.11 | 28.37 | False | None | None | False | None | False | 49962.6907 | 0 | | 2606987 | 81445 | None | I-11.28 P-85 V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GF ---- etc., complete with all lead | Kg | 666.7 | 666.7 | 176.4 | False | None | None | False | None | False | 117605.88 | 0 | | 2606988 | 81445 | None | I-11.28 P-85 V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. FF ---- etc., complete with all lead | Kg | 673.37 | 673.37 | 467.46 | False | None | None | False | None | False | 314773.5402 | 0 | | 2606989 | 81445 | None | I-11.28 P-85 V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. SF ---- etc., complete with all lead | Kg | 680.03 | 680.03 | 172.73 | False | None | None | False | None | False | 117461.5819 | 0 | | 2606990 | 81445 | None | I-11.28 P-85 V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. TF ---- etc., complete with all lead | Kg | 686.7 | 686.7 | 172.73 | False | None | None | False | None | False | 118613.691 | 0 | | 2606991 | 81445 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 149.86 | 149.86 | 519.0 | False | None | None | False | None | False | 77777.34 | 0 | | 2606992 | 81445 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 151.36 | 151.36 | 519.0 | False | None | None | False | None | False | 78555.84 | 0 | | 2606993 | 81445 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 152.86 | 152.86 | 257.19 | False | None | None | False | None | False | 39314.0634 | 0 | | 2606994 | 81445 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 154.36 | 154.36 | 171.37 | False | None | None | False | None | False | 26452.6732 | 0 | | 2606995 | 81445 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor ---- etc., complete with all lead | Sqm | 155.85 | 155.85 | 85.82 | False | None | None | False | None | False | 13375.047 | 0 | | 2606996 | 81445 | None | I-8.32 P-46 V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 327.06 | False | None | None | False | None | False | 60205.2048 | 0 | | 2606997 | 81445 | None | I-8.32 P-46 V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 185.92 | 185.92 | 327.06 | False | None | None | False | None | False | 60806.9952 | 0 | | 2606998 | 81445 | None | I-8.32 P-46 V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 187.76 | 187.76 | 292.92 | False | None | None | False | None | False | 54998.6592 | 0 | | 2606999 | 81445 | None | I-8.32 P-46 V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 189.6 | 189.6 | 126.06 | False | None | None | False | None | False | 23900.976 | 0 | | 2607000 | 81445 | None | I-8.32 P-46 V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor ---- etc., complete with all lead | Sqm | 191.44 | 191.44 | 166.86 | False | None | None | False | None | False | 31943.6784 | 0 | | 2607001 | 81445 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 25.38 | False | None | None | False | None | False | 1497.42 | 0 | | 2607002 | 81445 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 59.59 | 59.59 | 25.38 | False | None | None | False | None | False | 1512.3942 | 0 | | 2607003 | 81445 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 60.18 | 60.18 | 12.66 | False | None | None | False | None | False | 761.8788 | 0 | | 2607004 | 81445 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 60.77 | 60.77 | 9.42 | False | None | None | False | None | False | 572.4534 | 0 | | 2607005 | 81445 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor ---- etc., complete with all lead | Sqm | 61.36 | 61.36 | 3.24 | False | None | None | False | None | False | 198.8064 | 0 | | 2607006 | 81445 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 114.58 | False | None | None | False | None | False | 15548.506 | 0 | | 2607007 | 81445 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 137.06 | 137.06 | 25.38 | False | None | None | False | None | False | 3478.5828 | 0 | | 2607008 | 81445 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 138.41 | 138.41 | 12.66 | False | None | None | False | None | False | 1752.2706 | 0 | | 2607009 | 81445 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 139.77 | 139.77 | 9.42 | False | None | None | False | None | False | 1316.6334 | 0 | | 2607010 | 81445 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor ---- etc., complete with all lead | Sqm | 141.13 | 141.13 | 3.24 | False | None | None | False | None | False | 457.2612 | 0 | | 2607011 | 81445 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 45.36 | False | None | None | False | None | False | 2836.8144 | 0 | | 2607012 | 81445 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 63.17 | 63.17 | 45.36 | False | None | None | False | None | False | 2865.3912 | 0 | | 2607013 | 81445 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc., complete with all lead | Sqm | 63.79 | 63.79 | 15.12 | False | None | None | False | None | False | 964.5048 | 0 | | 2607014 | 81445 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TF ---- etc., complete with all lead | Sqm | 64.42 | 64.42 | 15.12 | False | None | None | False | None | False | 974.0304 | 0 | | 2607015 | 81445 | None | I-8.82 P-54 V-2 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) GF ---- etc., complete with all lead | Sqm | 798.86 | 798.86 | 45.36 | False | None | None | False | None | False | 36236.2896 | 0 | | 2607016 | 81445 | None | I-8.82 P-54 V-2 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) FF ---- etc., complete with all lead | Sqm | 806.85 | 806.85 | 45.36 | False | None | None | False | None | False | 36598.716 | 0 | | 2607017 | 81445 | None | I-8.82 P-54 V-2 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) SF ---- etc., complete with all lead | Sqm | 814.84 | 814.84 | 15.12 | False | None | None | False | None | False | 12320.3808 | 0 | | 2607018 | 81445 | None | I-8.82 P-54 V-2 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) TF ---- etc., complete with all lead | Sqm | 822.83 | 822.83 | 15.12 | False | None | None | False | None | False | 12441.1896 | 0 | | 2607019 | 81445 | None | I-7.18 P-23 V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. FF ---- etc., complete with all lead | Cum | 2403.86 | 2403.86 | 5.36 | False | None | None | False | None | False | 12884.6896 | 0 | | 2607020 | 81445 | None | I-7.18 P-23 V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. SF ---- etc., complete with all lead | Cum | 2427.66 | 2427.66 | 1.59 | False | None | None | False | None | False | 3859.9794 | 0 | | 2607021 | 81445 | None | I-7.18 P-23 V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. TF ---- etc., complete with all lead | Cum | 2451.46 | 2451.46 | 1.59 | False | None | None | False | None | False | 3897.8214 | 0 | | 2607022 | 81445 | None | I-11.5.1 P-77 V-2 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. ---- etc., complete with all lead | Sqm | 5389.72 | 5389.72 | 3.78 | False | None | None | False | None | False | 20373.1416 | 0 | | 2607023 | 81445 | None | I-15.12 P-152 V-2 | Newly Constructed Roof/Podium with PU Waterproof coating - Above 500 m2--Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo-textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids greater than 85%, Tensile strength greater than 2 Mpa as per ASTM D 412, Elongation at break greater than 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness greater than 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Second Floor ---- etc., complete with all lead | Sqm | 1402.19 | 1402.19 | 139.2 | False | None | None | False | None | False | 195184.848 | 0 | | 2607024 | 81445 | None | I-15.12 P-152 V-2 | Newly Constructed Roof/Podium with PU Waterproof coating - Above 500 m2--Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo-textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids greater than 85%, Tensile strength greater than 2 Mpa as per ASTM D 412, Elongation at break greater than 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness greater than 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Terrace floor ---- etc., complete with all lead | Sqm | 1429.69 | 1429.69 | 126.9 | False | None | None | False | None | False | 181427.661 | 0 | | 2607025 | 81445 | None | I-1.4.1 P-7 V-1 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete with all lead | Cum | 285.56 | 285.56 | 27.0 | False | None | None | False | None | False | 7710.12 | 0 | | 2607026 | 81445 | None | I-3.1 P-17 V-3 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ---- etc., complete with all lead | Cum | 100.3 | 100.3 | 18.0 | False | None | None | False | None | False | 1805.4 | 0 | | 2607027 | 81445 | None | I-4.11 A P-25 V-3 | Making 50 mm x 50 mm furrows, 25mm/ 50mm deep, 45 degrees to the center line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material.25 mm deep furrow cutting ---- etc., complete with all lead | Sqm | 9.44 | 9.44 | 180.0 | False | None | None | False | None | False | 1699.2 | 0 | | 2607028 | 81445 | None | I-3.7 P-17 V-3 | Compacting original ground supporting embankment-Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. ---- etc., complete with all lead | Cum | 123.9 | 123.9 | 27.0 | False | None | None | False | None | False | 3345.3 | 0 | | 2607029 | 81445 | None | I-4.17 P-26 V-3 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- etc., complete with all lead | Cum | 2824.92 | 2824.92 | 27.0 | False | None | None | False | None | False | 76272.84 | 0 | | 2607030 | 81445 | None | I-6.8.2 P-51 V-3 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA
& for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) ---- etc., complete with all lead | Sqm | 1369.98 | 1369.98 | 180.0 | False | None | None | False | None | False | 246596.4 | 0 | | 2607031 | 81445 | None | I-1.15.2 P-8 V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m ---- etc., complete with all lead | Cum | 501.5 | 501.5 | 6.61 | False | None | None | False | None | False | 3314.915 | 0 | | 2607032 | 81445 | None | I-2.2.3 P-15 V-1 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork Raft ---- etc., complete with all lead | Cum | 7700.77 | 7700.77 | 3.54 | False | None | None | False | None | False | 27260.7258 | 0 | | 2607033 | 81445 | None | I-2.2.3 P-15 V-1 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork Walls ---- etc., complete with all lead | Cum | 12710.02 | 12710.02 | 14.7 | False | None | None | False | None | False | 186837.294 | 0 | | 2607034 | 81445 | None | I-2.2.3 P-15 V-1 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including FormWork Cover Slab ---- etc., complete with all lead | Cum | 11214.72 | 11214.72 | 3.77 | False | None | None | False | None | False | 42279.4944 | 0 | | 2607035 | 81445 | None | I-2.11 h P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures ---- etc., complete with all lead | Tonne | 93232.98 | 93232.98 | 3.16 | False | None | None | False | None | False | 294616.2168 | 0 | | 2607036 | 81445 | None | I-15.14 P-152 V-2 | Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification. ---- etc., complete with all lead | Sqm | 1974.14 | 1974.14 | 32.64 | False | None | None | False | None | False | 64435.9296 | 0 | | 2607037 | 81445 | None | I-8.8 P-42 V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 437.78 | 437.78 | 65.28 | False | None | None | False | None | False | 28578.2784 | 0 | | 2607038 | 81445 | None | I-8.21 P-44 V-2 | Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 30.68 | 30.68 | 65.28 | False | None | None | False | None | False | 2002.7904 | 0 | | 2607039 | 81445 | None | I-18.3 P-221 V-5 | Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. ---- etc., complete with all lead | Nos | 2315.16 | 2315.16 | 6.0 | False | None | None | False | None | False | 13890.96 | 0 | | 2607040 | 81445 | None | I-15.1 P-149 V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/ Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- etc., complete with all lead | Sqm | 964.06 | 964.06 | 56.96 | False | None | None | False | None | False | 54912.8576 | 0 | | 2607041 | 81445 | None | I-6.5 P-13 V-2 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 1200mm Dia ---- etc., complete with all lead | Cum | 12952.86 | 12952.86 | 3.25 | False | None | None | False | None | False | 42096.795 | 0 | | 2607042 | 81445 | None | I-8.6.2 P-42 V-2 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:
3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 506.22 | 506.22 | 28.28 | False | None | None | False | None | False | 14315.9016 | 0 | | 2607043 | 81445 | None | I-17.1 P-175 V-2 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 1182.36 | 1182.36 | 0.45 | False | None | None | False | None | False | 532.062 | 0 | | 2607044 | 81445 | None | I-17.2 P-175 V-2 | Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer- in-charge. ---- etc., complete with all lead | Cum | 1399.48 | 1399.48 | 0.45 | False | None | None | False | None | False | 629.766 | 0 | | 2607045 | 81445 | None | I-17.3 P-175 V-2 | Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads
& lifts, all complete as per direction of Engineer -in-charge. ---- etc., complete with all lead | Cum | 1406.56 | 1406.56 | 0.45 | False | None | None | False | None | False | 632.952 | 0 | | 2607046 | 81445 | None | I-17.4 P-175 V-2 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge. ---- etc., complete with all lead | Cum | 1580.02 | 1580.02 | 0.45 | False | None | None | False | None | False | 711.009 | 0 | | 2607047 | 81445 | None | I-1.23 P-11 V-1 | Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. ---- etc., complete with all lead | Cum | 3164.76 | 3164.76 | 2.35 | False | None | None | False | None | False | 7437.186 | 0 | | 2607048 | 81445 | None | I-13.64.2 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes ---- etc., complete with all lead | m | 454.3 | 454.3 | 10.0 | False | None | None | False | None | False | 4543.0 | 0 | | 2607049 | 81445 | None | I-8.28 P-45 V-2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 105.02 | 105.02 | 80.0 | False | None | None | False | None | False | 8401.6 | 0 | | 2607050 | 81445 | None | I-19.3 P-187 V-2 | Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 2862.68 | 2862.68 | 65.87 | False | None | None | False | None | False | 188564.7316 | 0 | | 2607051 | 81445 | None | I-19.7.1 P-187 V-2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 568.76 | 568.76 | 163.05 | False | None | None | False | None | False | 92736.318 | 0 | | 2607052 | 81445 | None | I-19.52.1 P-192 V-2 | Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) ---- etc., complete with all lead | Cum | 892.08 | 892.08 | 25.41 | False | None | None | False | None | False | 22667.7528 | 0 | | 2607053 | 81445 | None | I-19.9.2 P-187 V-2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer- in-charge. In cement mortar ---- etc., complete with all lead | Cum | 1987.12 | 1987.12 | 103.23 | False | None | None | False | None | False | 205130.3976 | 0 | | 2607054 | 81445 | None | I-19.13.1 P-188 V-2 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area 3 m² and below ---- etc., complete with all lead | Sqm | 110.92 | 110.92 | 129.6 | False | None | None | False | None | False | 14375.232 | 0 | | 2607055 | 81445 | None | I-2.27 P-13 V-3 | Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and lead and stacking the serviceable and unserviceable material separately ---- etc., complete with all lead | Nos | 400.02 | 400.02 | 5.0 | False | None | None | False | None | False | 2000.1 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 4 Construction of Doctors, Nurses and Group D Quarters to CHC at HalliMysuru in Holenarasipura Taluk, Hassan District. (Water Supply & Sanitary Works) (Slice-4) | 1820480.13 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2607056 | 81446 | None | I-13.50.5 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes GF ---- etc., complete with all lead | m | 358.72 | 358.72 | 18.0 | False | None | None | False | None | False | 6456.96 | 0 | | 2607057 | 81446 | None | I-13.50.5 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes FF ---- etc., complete with all lead | m | 362.31 | 362.31 | 18.0 | False | None | None | False | None | False | 6521.58 | 0 | | 2607058 | 81446 | None | I-13.50.5 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes SF ---- etc., complete with all lead | m | 365.89 | 365.89 | 13.0 | False | None | None | False | None | False | 4756.57 | 0 | | 2607059 | 81446 | None | I-13.50.5 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40mm dia pipes TF ---- etc., complete with all lead | m | 369.48 | 369.48 | 13.0 | False | None | None | False | None | False | 4803.24 | 0 | | 2607060 | 81446 | None | I-13.50.6 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes GF ---- etc., complete with all lead | m | 455.48 | 455.48 | 11.0 | False | None | None | False | None | False | 5010.28 | 0 | | 2607061 | 81446 | None | I-13.50.6 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes FF ---- etc., complete with all lead | m | 460.03 | 460.03 | 11.0 | False | None | None | False | None | False | 5060.33 | 0 | | 2607062 | 81446 | None | I-13.50.6 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes SF ---- etc., complete with all lead | m | 464.59 | 464.59 | 8.0 | False | None | None | False | None | False | 3716.72 | 0 | | 2607063 | 81446 | None | I-13.50.6 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50mm dia pipes TF ---- etc., complete with all lead | m | 469.14 | 469.14 | 8.0 | False | None | None | False | None | False | 3753.12 | 0 | | 2607064 | 81446 | None | I-13.64.1 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes GF ---- etc., complete with all lead | m | 341.02 | 341.02 | 30.0 | False | None | None | False | None | False | 10230.6 | 0 | | 2607065 | 81446 | None | I-13.64.1 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes FF ---- etc., complete with all lead | m | 344.43 | 344.43 | 30.0 | False | None | None | False | None | False | 10332.9 | 0 | | 2607066 | 81446 | None | I-13.64.1 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes FF ---- etc., complete with all lead | m | 347.84 | 347.84 | 20.0 | False | None | None | False | None | False | 6956.8 | 0 | | 2607067 | 81446 | None | I-13.64.1 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes TF ---- etc., complete with all lead | m | 351.25 | 351.25 | 20.0 | False | None | None | False | None | False | 7025.0 | 0 | | 2607068 | 81446 | None | I-13.64.2 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes GF ---- etc., complete with all lead | m | 454.3 | 454.3 | 19.0 | False | None | None | False | None | False | 8631.7 | 0 | | 2607069 | 81446 | None | I-13.64.2 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes FF ---- etc., complete with all lead | m | 458.84 | 458.84 | 19.0 | False | None | None | False | None | False | 8717.96 | 0 | | 2607070 | 81446 | None | I-13.64.2 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes SF ---- etc., complete with all lead | m | 463.39 | 463.39 | 13.0 | False | None | None | False | None | False | 6024.07 | 0 | | 2607071 | 81446 | None | I-13.64.2 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes TF ---- etc., complete with all lead | m | 467.93 | 467.93 | 13.0 | False | None | None | False | None | False | 6083.09 | 0 | | 2607072 | 81446 | None | I-13.63 P-128 V-2 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0
cm X 4.0 cm with all fitting arrangements & all necessary accessories
complete GF ---- etc., complete with all lead | Each | 287.92 | 287.92 | 14.0 | False | None | None | False | None | False | 4030.88 | 0 | | 2607073 | 81446 | None | I-13.63 P-128 V-2 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0
cm X 4.0 cm with all fitting arrangements & all necessary accessories
complete FF ---- etc., complete with all lead | Each | 290.8 | 290.8 | 14.0 | False | None | None | False | None | False | 4071.2 | 0 | | 2607074 | 81446 | None | I-13.63 P-128 V-2 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0
cm X 4.0 cm with all fitting arrangements & all necessary accessories
complete SF ---- etc., complete with all lead | Each | 293.68 | 293.68 | 10.0 | False | None | None | False | None | False | 2936.8 | 0 | | 2607075 | 81446 | None | I-13.63 P-128 V-2 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0
cm X 4.0 cm with all fitting arrangements & all necessary accessories
complete SF ---- etc., complete with all lead | Each | 296.56 | 296.56 | 10.0 | False | None | None | False | None | False | 2965.6 | 0 | | 2607076 | 81446 | None | I-13.47 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter GF ---- etc., complete with all lead | m | 232.46 | 232.46 | 130.0 | False | None | None | False | None | False | 30219.8 | 0 | | 2607077 | 81446 | None | I-13.47 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter FF ---- etc., complete with all lead | m | 234.78 | 234.78 | 130.0 | False | None | None | False | None | False | 30521.4 | 0 | | 2607078 | 81446 | None | I-13.47 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter SF ---- etc., complete with all lead | m | 237.11 | 237.11 | 90.0 | False | None | None | False | None | False | 21339.9 | 0 | | 2607079 | 81446 | None | I-13.47 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter TF ---- etc., complete with all lead | m | 239.43 | 239.43 | 90.0 | False | None | None | False | None | False | 21548.7 | 0 | | 2607080 | 81446 | None | I-14.31 P-128 V-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complete. GF ---- etc., complete with all lead | Each | 1439.6 | 1439.6 | 6.0 | False | None | None | False | None | False | 8637.6 | 0 | | 2607081 | 81446 | None | I-14.31 P-128 V-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complete. FF ---- etc., complete with all lead | Each | 1454.0 | 1454.0 | 6.0 | False | None | None | False | None | False | 8724.0 | 0 | | 2607082 | 81446 | None | I-14.31 P-128 V-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complete. SF ---- etc., complete with all lead | Each | 1468.39 | 1468.39 | 4.0 | False | None | None | False | None | False | 5873.56 | 0 | | 2607083 | 81446 | None | I-14.31 P-128 V-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complete. TF ---- etc., complete with all lead | Each | 1482.79 | 1482.79 | 4.0 | False | None | None | False | None | False | 5931.16 | 0 | | 2607084 | 81446 | None | I-13.9.2P-118 V-2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter GF ---- etc., complete with all lead | Nos | 329.22 | 329.22 | 4.0 | False | None | None | False | None | False | 1316.88 | 0 | | 2607085 | 81446 | None | I-13.9.2P-118 V-2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter FF ---- etc., complete with all lead | Nos | 332.51 | 332.51 | 4.0 | False | None | None | False | None | False | 1330.04 | 0 | | 2607086 | 81446 | None | I-13.9.2P-118 V-2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter SF ---- etc., complete with all lead | Nos | 335.8 | 335.8 | 3.0 | False | None | None | False | None | False | 1007.4 | 0 | | 2607087 | 81446 | None | I-13.9.2P-118 V-2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter TF ---- etc., complete with all lead | Nos | 339.1 | 339.1 | 3.0 | False | None | None | False | None | False | 1017.3 | 0 | | 2607088 | 81446 | None | I-14.22B P-135 V-2 | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic
wall mixer of quality & make as approved by Engineer in charge. GF ---- etc., complete with all lead | Each | 6563.16 | 6563.16 | 4.0 | False | None | None | False | None | False | 26252.64 | 0 | | 2607089 | 81446 | None | I-14.22B P-135 V-2 | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic
wall mixer of quality & make as approved by Engineer in charge. FF ---- etc., complete with all lead | Each | 6628.79 | 6628.79 | 4.0 | False | None | None | False | None | False | 26515.16 | 0 | | 2607090 | 81446 | None | I-14.22B P-135 V-2 | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic
wall mixer of quality & make as approved by Engineer in charge. SF ---- etc., complete with all lead | Each | 6694.42 | 6694.42 | 3.0 | False | None | None | False | None | False | 20083.26 | 0 | | 2607091 | 81446 | None | I-14.22B P-135 V-2 | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic
wall mixer of quality & make as approved by Engineer in charge. TF ---- etc., complete with all lead | Each | 6760.05 | 6760.05 | 3.0 | False | None | None | False | None | False | 20280.15 | 0 | | 2607092 | 81446 | None | I-14.40.2 P-137 V-2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 g GF ---- etc., complete with all lead | Each | 585.28 | 585.28 | 4.0 | False | None | None | False | None | False | 2341.12 | 0 | | 2607093 | 81446 | None | I-14.40.2 P-137 V-2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 g FF ---- etc., complete with all lead | Each | 591.13 | 591.13 | 4.0 | False | None | None | False | None | False | 2364.52 | 0 | | 2607094 | 81446 | None | I-14.40.2 P-137 V-2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 g SF ---- etc., complete with all lead | Each | 596.99 | 596.99 | 3.0 | False | None | None | False | None | False | 1790.97 | 0 | | 2607095 | 81446 | None | I-14.40.2 P-137 V-2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 g TF ---- etc., complete with all lead | Each | 602.84 | 602.84 | 3.0 | False | None | None | False | None | False | 1808.52 | 0 | | 2607096 | 81446 | None | I-14.38 P-137 V-2 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour,
weighing not less than 105 g GF ---- etc., complete with all lead | Each | 171.1 | 171.1 | 4.0 | False | None | None | False | None | False | 684.4 | 0 | | 2607097 | 81446 | None | I-14.38 P-137 V-2 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour,
weighing not less than 105 g FF ---- etc., complete with all lead | Each | 172.81 | 172.81 | 4.0 | False | None | None | False | None | False | 691.24 | 0 | | 2607098 | 81446 | None | I-14.38 P-137 V-2 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour,
weighing not less than 105 g SF ---- etc., complete with all lead | Each | 174.52 | 174.52 | 3.0 | False | None | None | False | None | False | 523.56 | 0 | | 2607099 | 81446 | None | I-14.38 P-137 V-2 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour,
weighing not less than 105 g TF ---- etc., complete with all lead | Each | 176.23 | 176.23 | 3.0 | False | None | None | False | None | False | 528.69 | 0 | | 2607100 | 81446 | None | I-13.16 P-119 V-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 GF ---- etc., complete with all lead | Each | 731.6 | 731.6 | 32.0 | False | None | None | False | None | False | 23411.2 | 0 | | 2607101 | 81446 | None | I-13.16 P-119 V-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 FF ---- etc., complete with all lead | Each | 738.92 | 738.92 | 32.0 | False | None | None | False | None | False | 23645.44 | 0 | | 2607102 | 81446 | None | I-13.16 P-119 V-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 SF ---- etc., complete with all lead | Each | 746.23 | 746.23 | 24.0 | False | None | None | False | None | False | 17909.52 | 0 | | 2607103 | 81446 | None | I-13.16 P-119 V-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 TF ---- etc., complete with all lead | Each | 753.55 | 753.55 | 24.0 | False | None | None | False | None | False | 18085.2 | 0 | | 2607104 | 81446 | None | I-14.2.1 P-131 V-2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all ttings and fixtures
complete, including cutting and making good the walls and floors wherever
required : W.C. pan with ISI marked white solid plastic seat and lid GF ---- etc., complete with all lead | Each | 12853.74 | 12853.74 | 4.0 | False | None | None | False | None | False | 51414.96 | 0 | | 2607105 | 81446 | None | I-14.2.1 P-131 V-2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all ttings and fixtures
complete, including cutting and making good the walls and floors wherever
required : W.C. pan with ISI marked white solid plastic seat and lid FF ---- etc., complete with all lead | Each | 12982.28 | 12982.28 | 4.0 | False | None | None | False | None | False | 51929.12 | 0 | | 2607106 | 81446 | None | I-14.2.1 P-131 V-2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all ttings and fixtures
complete, including cutting and making good the walls and floors wherever
required : W.C. pan with ISI marked white solid plastic seat and lid SF ---- etc., complete with all lead | Each | 13110.81 | 13110.81 | 3.0 | False | None | None | False | None | False | 39332.43 | 0 | | 2607107 | 81446 | None | I-14.2.1 P-131 V-2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all ttings and fixtures
complete, including cutting and making good the walls and floors wherever
required : W.C. pan with ISI marked white solid plastic seat and lid TF ---- etc., complete with all lead | Each | 13239.35 | 13239.35 | 3.0 | False | None | None | False | None | False | 39718.05 | 0 | | 2607108 | 81446 | None | I-14.7.1 P-132 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps GF ---- etc., complete with all lead | Each | 3636.76 | 3636.76 | 6.0 | False | None | None | False | None | False | 21820.56 | 0 | | 2607109 | 81446 | None | I-14.7.1 P-132 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps FF ---- etc., complete with all lead | Each | 3673.13 | 3673.13 | 6.0 | False | None | None | False | None | False | 22038.78 | 0 | | 2607110 | 81446 | None | I-14.7.1 P-132 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps SF ---- etc., complete with all lead | Each | 3709.5 | 3709.5 | 4.0 | False | None | None | False | None | False | 14838.0 | 0 | | 2607111 | 81446 | None | I-14.7.1 P-132 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps TF ---- etc., complete with all lead | Each | 3745.86 | 3745.86 | 4.0 | False | None | None | False | None | False | 14983.44 | 0 | | 2607112 | 81446 | None | I-13.15 P-119 V-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. GF ---- etc., complete with all lead | Nos | 855.5 | 855.5 | 16.0 | False | None | None | False | None | False | 13688.0 | 0 | | 2607113 | 81446 | None | I-13.15 P-119 V-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. FF ---- etc., complete with all lead | Nos | 864.06 | 864.06 | 16.0 | False | None | None | False | None | False | 13824.96 | 0 | | 2607114 | 81446 | None | I-13.15 P-119 V-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. SF ---- etc., complete with all lead | Nos | 872.61 | 872.61 | 12.0 | False | None | None | False | None | False | 10471.32 | 0 | | 2607115 | 81446 | None | I-13.15 P-119 V-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. TF ---- etc., complete with all lead | Nos | 881.17 | 881.17 | 12.0 | False | None | None | False | None | False | 10574.04 | 0 | | 2607116 | 81446 | None | I-14.10.1.1 P-133 V-2 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required : (510x1040 mm bowl depth 250 mm) GF ---- etc., complete with all lead | Each | 6629.24 | 6629.24 | 3.0 | False | None | None | False | None | False | 19887.72 | 0 | | 2607117 | 81446 | None | I-14.10.1.1 P-133 V-2 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required : (510x1040 mm bowl depth 250 mm) FF ---- etc., complete with all lead | Each | 6695.53 | 6695.53 | 3.0 | False | None | None | False | None | False | 20086.59 | 0 | | 2607118 | 81446 | None | I-14.10.1.1 P-133 V-2 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required : (510x1040 mm bowl depth 250 mm) SF ---- etc., complete with all lead | Each | 6761.82 | 6761.82 | 2.0 | False | None | None | False | None | False | 13523.64 | 0 | | 2607119 | 81446 | None | I-14.10.1.1 P-133 V-2 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required : (510x1040 mm bowl depth 250 mm) TF ---- etc., complete with all lead | Each | 6828.12 | 6828.12 | 2.0 | False | None | None | False | None | False | 13656.24 | 0 | | 2607120 | 81446 | None | I-14.22A P-135 V-2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. GF ---- etc., complete with all lead | Each | 955.8 | 955.8 | 9.0 | False | None | None | False | None | False | 8602.2 | 0 | | 2607121 | 81446 | None | I-14.22A P-135 V-2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. FF ---- etc., complete with all lead | Each | 965.36 | 965.36 | 9.0 | False | None | None | False | None | False | 8688.24 | 0 | | 2607122 | 81446 | None | I-14.22A P-135 V-2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. SF ---- etc., complete with all lead | Each | 974.92 | 974.92 | 6.0 | False | None | None | False | None | False | 5849.52 | 0 | | 2607123 | 81446 | None | I-14.22A P-135 V-2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. TF ---- etc., complete with all lead | Each | 984.47 | 984.47 | 6.0 | False | None | None | False | None | False | 5906.82 | 0 | | 2607124 | 81446 | None | I-13.8.1.1 P-118 V-2 | Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) GF ---- etc., complete with all lead | Each | 97.94 | 97.94 | 9.0 | False | None | None | False | None | False | 881.46 | 0 | | 2607125 | 81446 | None | I-13.8.1.1 P-118 V-2 | Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) FF ---- etc., complete with all lead | Each | 98.92 | 98.92 | 9.0 | False | None | None | False | None | False | 890.28 | 0 | | 2607126 | 81446 | None | I-13.8.1.1 P-118 V-2 | Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) SF ---- etc., complete with all lead | Each | 99.9 | 99.9 | 6.0 | False | None | None | False | None | False | 599.4 | 0 | | 2607127 | 81446 | None | I-13.8.1.1 P-118 V-2 | Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) TF ---- etc., complete with all lead | Each | 100.88 | 100.88 | 6.0 | False | None | None | False | None | False | 605.28 | 0 | | 2607128 | 81446 | None | I-14.37.1 P-137 V-2 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260 g GF ---- etc., complete with all lead | Each | 361.08 | 361.08 | 9.0 | False | None | None | False | None | False | 3249.72 | 0 | | 2607129 | 81446 | None | I-14.37.1 P-137 V-2 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260 g FF ---- etc., complete with all lead | Each | 364.69 | 364.69 | 9.0 | False | None | None | False | None | False | 3282.21 | 0 | | 2607130 | 81446 | None | I-14.37.1 P-137 V-2 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260 g SF ---- etc., complete with all lead | Each | 368.3 | 368.3 | 6.0 | False | None | None | False | None | False | 2209.8 | 0 | | 2607131 | 81446 | None | I-14.37.1 P-137 V-2 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260 g TF ---- etc., complete with all lead | Each | 371.91 | 371.91 | 6.0 | False | None | None | False | None | False | 2231.46 | 0 | | 2607132 | 81446 | None | I-13.28.1 P-121 V-2 | Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g GF ---- etc., complete with all lead | Nos | 75.52 | 75.52 | 32.0 | False | None | None | False | None | False | 2416.64 | 0 | | 2607133 | 81446 | None | I-13.28.1 P-121 V-2 | Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g FF ---- etc., complete with all lead | Nos | 76.28 | 76.28 | 32.0 | False | None | None | False | None | False | 2440.96 | 0 | | 2607134 | 81446 | None | I-13.28.1 P-121 V-2 | Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g SF ---- etc., complete with all lead | Nos | 77.03 | 77.03 | 24.0 | False | None | None | False | None | False | 1848.72 | 0 | | 2607135 | 81446 | None | I-13.28.1 P-121 V-2 | Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g TF ---- etc., complete with all lead | Nos | 77.79 | 77.79 | 24.0 | False | None | None | False | None | False | 1866.96 | 0 | | 2607136 | 81446 | None | I-13.2.1 P-115 V-2 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore GF ---- etc., complete with all lead | Nos | 337.48 | 337.48 | 14.0 | False | None | None | False | None | False | 4724.72 | 0 | | 2607137 | 81446 | None | I-13.2.1 P-115 V-2 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore FF ---- etc., complete with all lead | Nos | 340.85 | 340.85 | 14.0 | False | None | None | False | None | False | 4771.9 | 0 | | 2607138 | 81446 | None | I-13.2.1 P-115 V-2 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore SF ---- etc., complete with all lead | Nos | 344.23 | 344.23 | 11.0 | False | None | None | False | None | False | 3786.53 | 0 | | 2607139 | 81446 | None | I-13.2.1 P-115 V-2 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore TF ---- etc., complete with all lead | Nos | 347.6 | 347.6 | 11.0 | False | None | None | False | None | False | 3823.6 | 0 | | 2607140 | 81446 | None | I-13.32.1 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 15 mm nominal dia Pipes GF ---- etc., complete with all lead | m | 356.36 | 356.36 | 56.0 | False | None | None | False | None | False | 19956.16 | 0 | | 2607141 | 81446 | None | I-13.32.1 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 15 mm nominal dia Pipes FF ---- etc., complete with all lead | m | 359.92 | 359.92 | 56.0 | False | None | None | False | None | False | 20155.52 | 0 | | 2607142 | 81446 | None | I-13.32.1 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 15 mm nominal dia Pipes SF ---- etc., complete with all lead | m | 363.49 | 363.49 | 38.0 | False | None | None | False | None | False | 13812.62 | 0 | | 2607143 | 81446 | None | I-13.32.1 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 15 mm nominal dia Pipes TF ---- etc., complete with all lead | m | 367.05 | 367.05 | 38.0 | False | None | None | False | None | False | 13947.9 | 0 | | 2607144 | 81446 | None | I-13.32.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes GF ---- etc., complete with all lead | m | 447.22 | 447.22 | 80.0 | False | None | None | False | None | False | 35777.6 | 0 | | 2607145 | 81446 | None | I-13.32.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes FF ---- etc., complete with all lead | m | 451.69 | 451.69 | 80.0 | False | None | None | False | None | False | 36135.2 | 0 | | 2607146 | 81446 | None | I-13.32.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes SF ---- etc., complete with all lead | m | 456.16 | 456.16 | 60.0 | False | None | None | False | None | False | 27369.6 | 0 | | 2607147 | 81446 | None | I-13.32.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes TF ---- etc., complete with all lead | m | 460.64 | 460.64 | 60.0 | False | None | None | False | None | False | 27638.4 | 0 | | 2607148 | 81446 | None | I-13.32.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 25 mm nominal dia pipes GF ---- etc., complete with all lead | m | 562.86 | 562.86 | 55.0 | False | None | None | False | None | False | 30957.3 | 0 | | 2607149 | 81446 | None | I-13.32.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 25 mm nominal dia pipes FF ---- etc., complete with all lead | m | 568.49 | 568.49 | 55.0 | False | None | None | False | None | False | 31266.95 | 0 | | 2607150 | 81446 | None | I-13.32.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 25 mm nominal dia pipes SF ---- etc., complete with all lead | m | 574.12 | 574.12 | 40.0 | False | None | None | False | None | False | 22964.8 | 0 | | 2607151 | 81446 | None | I-13.32.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 25 mm nominal dia pipes TF ---- etc., complete with all lead | m | 579.75 | 579.75 | 40.0 | False | None | None | False | None | False | 23190.0 | 0 | | 2607152 | 81446 | None | I-13.33.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 25 mm nominal dia Pipes GF ---- etc., complete with all lead | m | 256.06 | 256.06 | 65.0 | False | None | None | False | None | False | 16643.9 | 0 | | 2607153 | 81446 | None | I-13.33.5 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with ne step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the
walls etc. 40 mm nominal dia Pipes GF ---- etc., complete with all lead | m | 562.86 | 562.86 | 100.0 | False | None | None | False | None | False | 56286.0 | 0 | | 2607154 | 81446 | None | I-13.5.2 P-115 V-2 | Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete : 25 mm nominal bore GF ---- etc., complete with all lead | Nos | 803.58 | 803.58 | 8.0 | False | None | None | False | None | False | 6428.64 | 0 | | 2607155 | 81446 | None | I-13.4.2 P-117 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore GF ---- etc., complete with all lead | Nos | 700.92 | 700.92 | 4.0 | False | None | None | False | None | False | 2803.68 | 0 | | 2607156 | 81446 | None | I-13.4.3 P-117 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 40 mm nominal bore GF ---- etc., complete with all lead | Nos | 828.36 | 828.36 | 3.0 | False | None | None | False | None | False | 2485.08 | 0 | | 2607157 | 81446 | None | I-13.4.4 P-117 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 50 mm nominal bore GF ---- etc., complete with all lead | Nos | 1008.9 | 1008.9 | 3.0 | False | None | None | False | None | False | 3026.7 | 0 | | 2607158 | 81446 | None | I-13.34 P-123 V-2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead | l | 10.62 | 10.62 | 3000.0 | False | None | None | False | None | False | 31860.0 | 0 | | 2607159 | 81446 | None | Approved Rate | Providing, fixing, testing and commissioning of Air Vent Cowel 110mm ---- etc., complete with all lead | Nos | 219.48 | 219.48 | 3.0 | False | None | None | False | None | False | 658.44 | 0 | | 2607160 | 81446 | None | Approved Rate | Providing, fixing, testing and commissioning of Air Vent Cowel 75mm ---- etc., complete with all lead | Nos | 189.98 | 189.98 | 6.0 | False | None | None | False | None | False | 1139.88 | 0 | | 2607161 | 81446 | None | Approved Rate | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. (Jaguar make or Equalent) ---- etc., complete with all lead | Nos | 2558.24 | 2558.24 | 12.0 | False | None | None | False | None | False | 30698.88 | 0 | | 2607162 | 81446 | None | I-1.4.1 P-6 V-1 | Earth work excavation by manual means for drains,canals, waste weir,
draft, approach channels, key trenches, foundation of bridges and
such simillar works in all kinds of soils , as per drawing and technical
specifications, including setting out, shoring, strutting, barricading,
caution lights, removal of stumps and other deleterious matter,
excavated surface leveled and sides neatly dressed disposing off the
excavated stuff or sorting & stacking the selected stuff for reuse in a
radius of 50 m and lift upto 1.5 m including cost of labour, tools & other
appurtenaces required to complete the work. ---- etc., complete with all lead | Cum | 285.56 | 285.56 | 178.0 | False | None | None | False | None | False | 50829.68 | 0 | | 2607163 | 81446 | None | I-1.11 P-7 V-1 | Filling approved earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm
in depth, consolidating each deposited layer by ramming and watering,
lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 510.94 | 510.94 | 178.0 | False | None | None | False | None | False | 90947.32 | 0 | | 2607164 | 81446 | None | I-10.3.7 P-114 V-5 | Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying true to
line and level and perfect linking at joints, testing and commissioning,
including loading and unloading at both destinations and cuts of pipes
wherever necessary including jointing of UPVC pipes (with cost of
elastomeric sealing rings) and specials (excluding cost of specials) with
jointing of approved type, with all labour, lead & lifts, including encasing
the pipes alround to a depth of not less than 15 cms. with soft gravel
or selected earth available from the excavation etc. complete and giving
necessary hydraulic test to the required pressure as per ISS (contractor
will make his own arrangements for procuring water for testing) etc.
complete. for: Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete with all lead | m | 728.06 | 728.06 | 120.0 | False | None | None | False | None | False | 87367.2 | 0 | | 2607165 | 81446 | None | I-10.2.4 P-113 V-5 | Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying true to
line and level and perfect linking at joints, testing and commissioning,
including loading and unloading at both destinations and cuts of pipes
wherever necessary including jointing of UPVC pipes (with cost of
elastomeric sealing rings) and specials (excluding cost of specials) with
jointing of approved type, with all labour, lead & lifts, including encasing
the pipes alround to a depth of not less than 15 cms. with soft gravel
or selected earth available from the excavation etc. complete and giving
necessary hydraulic test to the required pressure as per ISS (contractor
will make his own arrangements for procuring water for testing) etc.
complete for: Pipes of SN4, 160mm dia. ---- etc., complete with all lead | m | 679.68 | 679.68 | 80.0 | False | None | None | False | None | False | 54374.4 | 0 | | 2607166 | 81446 | None | I-16.9 P-191 V-5 | Constructing brick masonry chamber of internal dimension 600x600mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering
12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc., complete with all lead | Each | 6435.72 | 6435.72 | 14.0 | False | None | None | False | None | False | 90100.08 | 0 | | 2607167 | 81446 | None | I-13.39 P-124 V-2 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber 150 x 100 mm size P type With
Non Modular common burnt clay bricks of designation 3.5 & with water
tight C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as
per standard design: ---- etc., complete with all lead | Each | 3045.58 | 3045.58 | 10.0 | False | None | None | False | None | False | 30455.8 | 0 | | 2607168 | 81446 | None | I-13.40.1 P-157 V-5 | Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. (pump room collection sump pumps) (2 HP, Size 65x50 Head 13M, Discharge 462 LPM) ---- etc., complete with all lead | Each | 18419.8 | 18419.8 | 3.0 | False | None | None | False | None | False | 55259.4 | 0 | | 2607169 | 81446 | None | I-13.32 P-156 V-5 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and
equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. ---- etc., complete with all lead | Job | 7670.0 | 7670.0 | 3.0 | False | None | None | False | None | False | 23010.0 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 4 Construction of Doctors, Nurses and Group D Quarters to CHC at HalliMysuru in Holenarasipura Taluk, Hassan District. (Electrical Works) (Slice-4) | 2934165.37 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2607170 | 81447 | None | 2.2.1 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 317.42 | 317.42 | 38.0 | False | None | None | False | None | False | 12061.96 | 0 | | 2607171 | 81447 | None | 2.2.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 447.22 | 447.22 | 54.0 | False | None | None | False | None | False | 24149.88 | 0 | | 2607172 | 81447 | None | 2.2.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for eachoutlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 654.9 | 654.9 | 98.0 | False | None | None | False | None | False | 64180.2 | 0 | | 2607173 | 81447 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way ---- etc., complete with all lead | Each | 162.84 | 162.84 | 40.0 | False | None | None | False | None | False | 6513.6 | 0 | | 2607174 | 81447 | None | 3.4.2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead | Each | 187.62 | 187.62 | 80.0 | False | None | None | False | None | False | 15009.6 | 0 | | 2607175 | 81447 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead | Each | 208.86 | 208.86 | 48.0 | False | None | None | False | None | False | 10025.28 | 0 | | 2607176 | 81447 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead | Each | 259.6 | 259.6 | 12.0 | False | None | None | False | None | False | 3115.2 | 0 | | 2607177 | 81447 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 14.0 | False | None | None | False | None | False | 4311.72 | 0 | | 2607178 | 81447 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 40.0 | False | None | None | False | None | False | 15056.8 | 0 | | 2607179 | 81447 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete with all lead | Each | 161.66 | 161.66 | 40.0 | False | None | None | False | None | False | 6466.4 | 0 | | 2607180 | 81447 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module ---- etc., complete with all lead | Each | 189.98 | 189.98 | 80.0 | False | None | None | False | None | False | 15198.4 | 0 | | 2607181 | 81447 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 48.0 | False | None | None | False | None | False | 9912.0 | 0 | | 2607182 | 81447 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 12.0 | False | None | None | False | None | False | 3313.44 | 0 | | 2607183 | 81447 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 14.0 | False | None | None | False | None | False | 4691.68 | 0 | | 2607184 | 81447 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 40.0 | False | None | None | False | None | False | 16236.8 | 0 | | 2607185 | 81447 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead | Each | 120.36 | 120.36 | 282.0 | False | None | None | False | None | False | 33941.52 | 0 | | 2607186 | 81447 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead | Each | 201.78 | 201.78 | 92.0 | False | None | None | False | None | False | 18563.76 | 0 | | 2607187 | 81447 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 30.0 | False | None | None | False | None | False | 12637.8 | 0 | | 2607188 | 81447 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 28.0 | False | None | None | False | None | False | 10771.04 | 0 | | 2607189 | 81447 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 28.0 | False | None | None | False | None | False | 7797.44 | 0 | | 2607190 | 81447 | None | I-1.13 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | No | 138.06 | 138.06 | 30.0 | False | None | None | False | None | False | 4141.8 | 0 | | 2607191 | 81447 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead | Each | 184.08 | 184.08 | 20.0 | False | None | None | False | None | False | 3681.6 | 0 | | 2607192 | 81447 | None | 12.2.1 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete with all lead | Each | 290.28 | 290.28 | 8.0 | False | None | None | False | None | False | 2322.24 | 0 | | 2607193 | 81447 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 77.88 | 77.88 | 1200.0 | False | None | None | False | None | False | 93456.0 | 0 | | 2607194 | 81447 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead | m | 92.04 | 92.04 | 1620.0 | False | None | None | False | None | False | 149104.8 | 0 | | 2607195 | 81447 | None | 1.3.1 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 80.24 | 80.24 | 600.0 | False | None | None | False | None | False | 48144.0 | 0 | | 2607196 | 81447 | None | 1.3.2 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead | m | 93.22 | 93.22 | 810.0 | False | None | None | False | None | False | 75508.2 | 0 | | 2607197 | 81447 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 1.5 sqmm ---- etc., complete with all lead | m | 30.68 | 30.68 | 620.0 | False | None | None | False | None | False | 19021.6 | 0 | | 2607198 | 81447 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 2.5 sqmm ---- etc., complete with all lead | m | 49.56 | 49.56 | 1970.0 | False | None | None | False | None | False | 97633.2 | 0 | | 2607199 | 81447 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 4 sqmm ---- etc., complete with all lead | m | 74.34 | 74.34 | 1240.0 | False | None | None | False | None | False | 92181.6 | 0 | | 2607200 | 81447 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 6 sqmm ---- etc., complete with all lead | m | 108.56 | 108.56 | 180.0 | False | None | None | False | None | False | 19540.8 | 0 | | 2607201 | 81447 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete with all lead | Each | 2748.22 | 2748.22 | 8.0 | False | None | None | False | None | False | 21985.76 | 0 | | 2607202 | 81447 | None | 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead | Each | 489.7 | 489.7 | 80.0 | False | None | None | False | None | False | 39176.0 | 0 | | 2607203 | 81447 | None | 5.20.1 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete with all lead | Each | 5046.86 | 5046.86 | 8.0 | False | None | None | False | None | False | 40374.88 | 0 | | 2607204 | 81447 | None | I-32.07 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 25 sqmm ---- etc., complete with all lead | Km | 164667.82 | 164667.82 | 0.2 | False | None | None | False | None | False | 32933.564 | 0 | | 2607205 | 81447 | None | I-21.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead | Km | 24645.48 | 24645.48 | 0.3 | False | None | None | False | None | False | 7393.644 | 0 | | 2607206 | 81447 | None | I-32.04 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 16 sqmm ---- etc., complete with all lead | Km | 104333.24 | 104333.24 | 0.2 | False | None | None | False | None | False | 20866.648 | 0 | | 2607207 | 81447 | None | 6.17.6 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete with all lead | Each | 14.68 | 14.68 | 24.0 | False | None | None | False | None | False | 352.32 | 0 | | 2607208 | 81447 | None | I-12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.
cutouts and other equipment's on the meter board using 40 mm dia
2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be
filled with equal proportion of salt and charcoal 150 mm all-round the
pipe to complete depth. The connection from the pipe to the conduit
etc., is to be established through GI wire of size as per lSI specification
7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts
etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead | No | 4141.8 | 4141.8 | 13.0 | False | None | None | False | None | False | 53843.4 | 0 | | 2607209 | 81447 | None | I-6.3 | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete with all lead | Per Mtr | 22.42 | 22.42 | 75.0 | False | None | None | False | None | False | 1681.5 | 0 | | 2607210 | 81447 | None | 11.3.2 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 48.0 | False | None | None | False | None | False | 39081.6 | 0 | | 2607211 | 81447 | None | 11.11.3 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead | Each | 175.82 | 175.82 | 20.0 | False | None | None | False | None | False | 3516.4 | 0 | | 2607212 | 81447 | None | 11.11.5 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should Less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete with all lead | Each | 317.42 | 317.42 | 20.0 | False | None | None | False | None | False | 6348.4 | 0 | | 2607213 | 81447 | None | 11.11.7 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete with all lead | Each | 502.68 | 502.68 | 28.0 | False | None | None | False | None | False | 14075.04 | 0 | | 2607214 | 81447 | None | I-12.27 | Supplying & Fixing of Special Type pigmy and candle lamp.
Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead | Each | 61.36 | 61.36 | 16.0 | False | None | None | False | None | False | 981.76 | 0 | | 2607215 | 81447 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 18.0 | False | None | None | False | None | False | 31690.08 | 0 | | 2607216 | 81447 | None | 6.4.1 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete with all lead | Each | 3158.86 | 3158.86 | 30.0 | False | None | None | False | None | False | 94765.8 | 0 | | 2607217 | 81447 | None | 11.8.1 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25watts ---- etc., complete with all lead | No | 2861.5 | 2861.5 | 8.0 | False | None | None | False | None | False | 22892.0 | 0 | | 2607218 | 81447 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 48.0 | False | None | None | False | None | False | 6910.08 | 0 | | 2607219 | 81447 | None | I-13.11 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size
wooden board and wired. ---- etc., complete with all lead | Each | 371.7 | 371.7 | 30.0 | False | None | None | False | None | False | 11151.0 | 0 | | 2607220 | 81447 | None | I-13.13 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 18.0 | False | None | None | False | None | False | 15016.68 | 0 | | 2607221 | 81447 | None | 13.4.1 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete with all lead | Each | 1723.98 | 1723.98 | 8.0 | False | None | None | False | None | False | 13791.84 | 0 | | 2607222 | 81447 | None | I-13.5 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead | Each | 191.16 | 191.16 | 8.0 | False | None | None | False | None | False | 1529.28 | 0 | | 2607223 | 81447 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 486000.0 | False | None | None | False | None | False | 247860.0 | 0 | | 2607224 | 81447 | None | 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x10mm Aluminum Strips ---- etc., complete with all lead | m | 2908.7 | 2908.7 | 11.0 | False | None | None | False | None | False | 31995.7 | 0 | | 2607225 | 81447 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead | m | 359.9 | 359.9 | 34.0 | False | None | None | False | None | False | 12236.6 | 0 | | 2607226 | 81447 | None | 5.41.4 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead | m | 892.08 | 892.08 | 34.0 | False | None | None | False | None | False | 30330.72 | 0 | | 2607227 | 81447 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 100Amps 25kA ---- etc., complete with all lead | Each | 10014.66 | 10014.66 | 5.0 | False | None | None | False | None | False | 50073.3 | 0 | | 2607228 | 81447 | None | 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 13.0 | False | None | None | False | None | False | 11336.26 | 0 | | 2607229 | 81447 | None | I-5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead | Each | 10991.7 | 10991.7 | 3.0 | False | None | None | False | None | False | 32975.1 | 0 | | 2607230 | 81447 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead | Each | 607.7 | 607.7 | 9.0 | False | None | None | False | None | False | 5469.3 | 0 | | 2607231 | 81447 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead | Each | 663.16 | 663.16 | 9.0 | False | None | None | False | None | False | 5968.44 | 0 | | 2607232 | 81447 | None | 5.7.2 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers32Amps ---- etc., complete with all lead | Each | 284.38 | 284.38 | 14.0 | False | None | None | False | None | False | 3981.32 | 0 | | 2607233 | 81447 | None | I-5.3 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete with all lead | Each | 1628.4 | 1628.4 | 10.0 | False | None | None | False | None | False | 16284.0 | 0 | | 2607234 | 81447 | None | 7.1.3 | Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.25Litres ---- etc., complete with all lead | Each | 12085.56 | 12085.56 | 8.0 | False | None | None | False | None | False | 96684.48 | 0 | | 2607235 | 81447 | None | I-1.01 | Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete with all lead | Set | 8349.68 | 8349.68 | 2.0 | False | None | None | False | None | False | 16699.36 | 0 | | 2607236 | 81447 | None | I-2.02 | Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete with all lead | Set | 1313.34 | 1313.34 | 2.0 | False | None | None | False | None | False | 2626.68 | 0 | | 2607237 | 81447 | None | I-6.05 | Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete with all lead | No | 102.66 | 102.66 | 6.0 | False | None | None | False | None | False | 615.96 | 0 | | 2607238 | 81447 | None | I-13.12 | Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete with all lead | No | 56.64 | 56.64 | 6.0 | False | None | None | False | None | False | 339.84 | 0 | | 2607239 | 81447 | None | I-2.16 | Supply of Spiral Earth Electrode ---- etc., complete with all lead | No | 282.02 | 282.02 | 2.0 | False | None | None | False | None | False | 564.04 | 0 | | 2607240 | 81447 | None | I-2.08 | Erection of Spiral Earth Electrode ---- etc., complete with all lead | No | 109.74 | 109.74 | 2.0 | False | None | None | False | None | False | 219.48 | 0 | | 2607241 | 81447 | None | I-68.17 | Supply and fixing of Caution/Danger Board ---- etc., complete with all lead | No | 177.0 | 177.0 | 1.0 | False | None | None | False | None | False | 177.0 | 0 | | 2607242 | 81447 | None | I-4.02 | Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete with all lead | Each | 105.02 | 105.02 | 2.0 | False | None | None | False | None | False | 210.04 | 0 | | 2607243 | 81447 | None | I-5.09 | Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete with all lead | Each | 49.56 | 49.56 | 2.0 | False | None | None | False | None | False | 99.12 | 0 | | 2607244 | 81447 | None | I-24.04 | Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete with all lead | Set | 25086.8 | 25086.8 | 1.0 | False | None | None | False | None | False | 25086.8 | 0 | | 2607245 | 81447 | None | I-24.07 | Supply and fixing of H-Frame for mounting GOS ---- etc., complete with all lead | No | 7163.78 | 7163.78 | 1.0 | False | None | None | False | None | False | 7163.78 | 0 | | 2607246 | 81447 | None | I-25.01 | Supply of DOLO Cut Out ---- etc., complete with all lead | Set of 3 Nos | 6932.5 | 6932.5 | 1.0 | False | None | None | False | None | False | 6932.5 | 0 | | 2607247 | 81447 | None | I-13.01 | Erection of DOLO Cut Out ---- etc., complete with all lead | Set of 3 Nos | 279.66 | 279.66 | 1.0 | False | None | None | False | None | False | 279.66 | 0 | | 2607248 | 81447 | None | I-13.07 | Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete with all lead | Each | 200912.7 | 200912.7 | 1.0 | False | None | None | False | None | False | 200912.7 | 0 | | 2607249 | 81447 | None | 12.58.3 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete with all lead | m | 151.04 | 151.04 | 100.0 | False | None | None | False | None | False | 15104.0 | 0 | | 2607250 | 81447 | None | 12.58.9 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete with all lead | m | 1938.74 | 1938.74 | 100.0 | False | None | None | False | None | False | 193874.0 | 0 | | 2607251 | 81447 | None | 12.58.11 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete with all lead | Each | 8756.78 | 8756.78 | 10.0 | False | None | None | False | None | False | 87567.8 | 0 | | 2607252 | 81447 | None | I-45.07 | Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete with all lead | Set | 4799.06 | 4799.06 | 4.0 | False | None | None | False | None | False | 19196.24 | 0 | | 2607253 | 81447 | None | I-45.04 | Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete with all lead | Set | 3702.84 | 3702.84 | 2.0 | False | None | None | False | None | False | 7405.68 | 0 | | 2607254 | 81447 | None | I-36.01 | 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND
WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete with all lead | Km | 1049805.88 | 1049805.88 | 0.2 | False | None | None | False | None | False | 209961.176 | 0 | | 2607255 | 81447 | None | I-38 | Providing chain link fencing 50 mm size of 8 guage properly stretched between
rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be
welded to the Pole and block pipe at top and bottom as required including cost
of all materials, labour, lead and lifts, cutting, bending wherever necessary,
wastage and lapping etc., complete as per the direction of the engineer
incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete with all lead | Sqm | 1164.66 | 1164.66 | 150.0 | False | None | None | False | None | False | 174699.0 | 0 | | 2607256 | 81447 | None | 5.40.2 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete with all lead | m | 4053.3 | 4053.3 | 6.0 | False | None | None | False | None | False | 24319.8 | 0 | | 2607257 | 81447 | None | 5.15.11 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 160Amps 25kA ---- etc., complete with all lead | Each | 15867.46 | 15867.46 | 1.0 | False | None | None | False | None | False | 15867.46 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 4 Construction of Doctors, Nurses and Group D Quarters to CHC at HalliMysuru in Holenarasipura Taluk, Hassan District. (Borewell Works and Consultancy Charges) (Slice-4) | 826714.29 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2607258 | 81448 | None | I-12.4 P-140 V-5 | Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indic ting the location of the site, recommended depth of casing pipe required seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casin pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging techn al personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above M and upto 30 M - 15%,
b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of R . 100/- is to be deducted for Dry Borewell towards yield test. tc. complete. ---- etc., complete with all lead | Each | 6239.84 | 6239.84 | 1.0 | False | None | None | False | None | False | 6239.84 | 0 | | 2607259 | 81448 | None | I-12.1.1 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 0 to 50 Mtrs ---- etc., complete with all lead | Rmtr | 436.6 | 436.6 | 50.0 | False | None | None | False | None | False | 21830.0 | 0 | | 2607260 | 81448 | None | I-12.1.2 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 50 to 100 Mtrs ---- etc., complete with all lead | Rmtr | 547.52 | 547.52 | 50.0 | False | None | None | False | None | False | 27376.0 | 0 | | 2607261 | 81448 | None | I-12.1.3 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 100 to 150 Mtrs ---- etc., complete with all lead | Rmtr | 581.74 | 581.74 | 50.0 | False | None | None | False | None | False | 29087.0 | 0 | | 2607262 | 81448 | None | I-12.1.4 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 150 to 200 Mtrs ---- etc., complete with all lead | Rmtr | 674.96 | 674.96 | 50.0 | False | None | None | False | None | False | 33748.0 | 0 | | 2607263 | 81448 | None | I-12.1.5 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 200 to 250 Mtrs ---- etc., complete with all lead | Rmtr | 791.78 | 791.78 | 50.0 | False | None | None | False | None | False | 39589.0 | 0 | | 2607264 | 81448 | None | I-12.1.6 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 250 to 300 Mtrs ---- etc., complete with all lead | Rmtr | 873.2 | 873.2 | 50.0 | False | None | None | False | None | False | 43660.0 | 0 | | 2607265 | 81448 | None | I-12.1.7 P-139 V-5 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) Borewell depth of 300 to 350 Mtrs ---- etc., complete with all lead | Rmtr | 1024.24 | 1024.24 | 50.0 | False | None | None | False | None | False | 51212.0 | 0 | | 2607266 | 81448 | None | I-12.32 P-143 V-5 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 nd latest ammendments, electrical resistance welded steel tubes, terial and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixe with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- etc., complete with all lead | m | 2280.94 | 2280.94 | 35.0 | False | None | None | False | None | False | 79832.9 | 0 | | 2607267 | 81448 | None | I-13.28 P-155 V-5 | Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments. ---- etc., complete with all lead | Rmtr | 649.0 | 649.0 | 200.0 | False | None | None | False | None | False | 129800.0 | 0 | | 2607268 | 81448 | None | I-12.33 P-143 V-5 | Providing and fixing MS casing collars per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thic ness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments. ---- etc., complete with all lead | Nos | 177.0 | 177.0 | 1.0 | False | None | None | False | None | False | 177.0 | 0 | | 2607269 | 81448 | None | I-12.34 P-143 V-5 | Providing and laying at site of wor MS asing caps as per IS 1239 (part- II) 1982 with all latest amendm nts if any for any dia. The thickness of plate used for covering one e shall be 3mm (minimum). The dimensions of caps and olars shall be strictly as per IS 1239 (Part-II) 1982 with all mendments including cost of material and labour charges for fixing, if a y etc. complete with all lead and lifts and as directed by the Engineer in charge. ---- etc., complete with all lead | Nos | 193.52 | 193.52 | 1.0 | False | None | None | False | None | False | 193.52 | 0 | | 2607270 | 81448 | None | I-13.81.3 P-95 S.R 2018-19 | Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) ---- etc., complete with all lead | Nos | 247.8 | 247.8 | 1.0 | False | None | None | False | None | False | 247.8 | 0 | | 2607271 | 81448 | None | I-13.13.6 P-152 V-5 | Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For HP etc Complete.5.00 HP - 90 LPM @ 110 m = 15 STG Outlet Dia - 2.00" ---- etc., complete with all lead | Each | 37921.66 | 37921.66 | 1.0 | False | None | None | False | None | False | 37921.66 | 0 | | 2607272 | 81448 | None | I-13.23.2 P-155 V-5 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protectionsuitable for thepumpdescribedabove 1 no Indoor type NOTE: 1) DOL- Direct Online Starter
2) S-D- Star Delta Starter etc. complete.3 to 6 HP pumps ---- etc., complete with all lead | Each | 11269.0 | 11269.0 | 1.0 | False | None | None | False | None | False | 11269.0 | 0 | | 2607273 | 81448 | None | I-13.29 P-155 V-5 | Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets ---- etc., complete with all lead | Set | 1829.0 | 1829.0 | 1.0 | False | None | None | False | None | False | 1829.0 | 0 | | 2607274 | 81448 | None | I-13.31 P-155 V-5 | Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. ---- etc., complete with all lead | Job | 47.2 | 47.2 | 100.0 | False | None | None | False | None | False | 4720.0 | 0 | | 2607275 | 81448 | None | I-13.32 P-156 V-5 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. ---- etc., complete with all lead | Job | 7670.0 | 7670.0 | 1.0 | False | None | None | False | None | False | 7670.0 | 0 | | 2607276 | 81448 | None | I-13.33 P-156 V-5 | Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. ---- etc., complete with all lead | Job | 1593.0 | 1593.0 | 1.0 | False | None | None | False | None | False | 1593.0 | 0 | | 2607277 | 81448 | None | I-2.6.2 P-7 V-6 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- etc., complete with all lead | m | 198.24 | 198.24 | 275.0 | False | None | None | False | None | False | 54516.0 | 0 | | 2607278 | 81448 | None | I-5.42.2 P-20 V-6 | Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 30000.0 | False | None | None | False | None | False | 15300.0 | 0 | | 2607279 | 81448 | None | I-5.44.4 P-21 V-6 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm. ---- etc., complete with all lead | Each | 17133.6 | 17133.6 | 1.0 | False | None | None | False | None | False | 17133.6 | 0 | | 2607280 | 81448 | None | I-5.6.6 P-14 V-6 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20" x 2.5" ---- etc., complete with all lead | Each | 384.83 | 384.83 | 1.0 | False | None | None | False | None | False | 384.83 | 0 | | 2607281 | 81448 | None | I-5.18.1 P-17 V-6 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete with all lead | Each | 489.7 | 489.7 | 1.0 | False | None | None | False | None | False | 489.7 | 0 | | 2607282 | 81448 | None | I-13.18.1 P-57 V-6 | Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling..15A to 63A TPST ---- etc., complete with all lead | Each | 328.04 | 328.04 | 1.0 | False | None | None | False | None | False | 328.04 | 0 | | 2607283 | 81448 | None | I-5.37 P-19 V-6 | Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- etc., complete with all lead | Kvar | 566.4 | 566.4 | 1.0 | False | None | None | False | None | False | 566.4 | 0 | | 2607284 | 81448 | None | 27. | Preparation of detailed Architectural drawings,Structural design and drawings including Soil exploration as per I.S Codes and proof checking by IISC/NIT/IIT only as decided by the Department and the same has to be furnished to the Department for approval and also providing consultancy for Architectural & structural designs & Drawings and Elevations floor wise, preparation of internal and external Electrical works schematic drawings and working drawings for public health engineering working drawings, interior layout etc and liaison with other department and approval of pollution control board & any other statutory approval from the concerned dept and drawings related to this project. (6 sets of as built drawings shall be submitted to the employer) Note - All required service GFC drawings required for completion of projects. - etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work. ---- etc., complete with all lead | LS | 210000.0 | 210000.0 | 1.0 | False | None | None | False | None | False | 210000.0 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 2 Upgradation of infrastructure facilities to the TLH and Staff Quarters at Holenarasipura in Hassan District. (Civil Works) (Slice-2) | 8375345.63 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2607285 | 81449 | None | I-19.59 P-169 V-2 | Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 451.25 | 451.25 | 8.01 | False | None | None | False | None | False | 3614.5125 | 0 | | 2607286 | 81449 | None | I-2.7B P-8 V-3 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead.Cement Concrete Grade M-15 & M-20 ---- etc., complete with all lead | Cum | 1156.65 | 1156.65 | 2.48 | False | None | None | False | None | False | 2868.492 | 0 | | 2607287 | 81449 | None | I-19.7.3 P-162 V-2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar ---- etc., complete with all lead | Cum | 1275.66 | 1275.66 | 17.23 | False | None | None | False | None | False | 21979.6218 | 0 | | 2607288 | 81449 | None | I-2.5.2 P-17 V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS SECOND FLOOR ---- etc., complete with all lead | Cum | 14421.65 | 14421.65 | 12.42 | False | None | None | False | None | False | 179116.893 | 0 | | 2607289 | 81449 | None | I-2.5.2 P-17 V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS, LINTELS SECOND FLOOR ---- etc., complete with all lead | Cum | 13573.31 | 13573.31 | 30.55 | False | None | None | False | None | False | 414664.6205 | 0 | | 2607290 | 81449 | None | I-2.5.2 P-17 V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB SECOND FLOOR ---- etc., complete with all lead | Cum | 12724.98 | 12724.98 | 41.26 | False | None | None | False | None | False | 525032.6748 | 0 | | 2607291 | 81449 | None | I-2.5.1 P-16 V-1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork SECOND FLOOR ---- etc., complete with all lead | Cum | 11917.93 | 11917.93 | 5.0 | False | None | None | False | None | False | 59589.65 | 0 | | 2607292 | 81449 | None | I-15.4 P-135 V-3 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy SECOND FLOOR ---- etc., complete with all lead | Nos | 252.9 | 252.9 | 10.0 | False | None | None | False | None | False | 2529.0 | 0 | | 2607293 | 81449 | None | I-2.11 a P-18 V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SECOND FLOOR ---- etc., complete with all lead | Tonne | 110900.56 | 110900.56 | 10.25 | False | None | None | False | None | False | 1136730.74 | 0 | | 2607294 | 81449 | None | I-4.21 P-15 S.R 2018-19 | Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. ---- etc., complete with all lead | Rmtr | 38.94 | 38.94 | 51.0 | False | None | None | False | None | False | 1985.94 | 0 | | 2607295 | 81449 | None | Approved Rate | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead | Rmtr | 86.14 | 86.14 | 51.0 | False | None | None | False | None | False | 4393.14 | 0 | | 2607296 | 81449 | None | I-6.5 P-13 V-2 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. SECOND FLOOR ---- etc., complete with all lead | Cum | 13608.27 | 13608.27 | 123.46 | False | None | None | False | None | False | 1680077.0142 | 0 | | 2607297 | 81449 | None | I-6.15 P-14 V-2 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery
& other incidental charges complete as per the direction of engineer incharge of work. SECOND FLOOR ---- etc., complete with all lead | Sqm | 1280.62 | 1280.62 | 74.81 | False | None | None | False | None | False | 95803.1822 | 0 | | 2607298 | 81449 | None | I-12.57.6 P-105 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial ---- etc., complete with all lead | Sqm | 4118.31 | 4118.31 | 38.16 | False | None | None | False | None | False | 157154.7096 | 0 | | 2607299 | 81449 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. SECOND FLOOR ---- etc., complete with all lead | Cum | 122501.75 | 122501.75 | 1.56 | False | None | None | False | None | False | 191102.73 | 0 | | 2607300 | 81449 | None | I-12.51 P-105 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. SECOND FLOOR ---- etc., complete with all lead | Nos | 1259.54 | 1259.54 | 13.0 | False | None | None | False | None | False | 16374.02 | 0 | | 2607301 | 81449 | None | I-22.15.2 P-218 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 300mm FIRST FLOOR ---- etc., complete with all lead | No | 681.84 | 681.84 | 26.0 | False | None | None | False | None | False | 17727.84 | 0 | | 2607302 | 81449 | None | I-22.15.4 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm FIRST FLOOR ---- etc., complete with all lead | No | 464.89 | 464.89 | 13.0 | False | None | None | False | None | False | 6043.57 | 0 | | 2607303 | 81449 | None | I-22.15.6 P-219V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm FIRST FLOOR ---- etc., complete with all lead | No | 185.96 | 185.96 | 26.0 | False | None | None | False | None | False | 4834.96 | 0 | | 2607304 | 81449 | None | I-22.15.9 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm FIRST FLOOR ---- etc., complete with all lead | No | 86.78 | 86.78 | 39.0 | False | None | None | False | None | False | 3384.42 | 0 | | 2607305 | 81449 | None | I-22.15.10 P-219 V-2 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm FIRST FLOOR ---- etc., complete with all lead | No | 123.97 | 123.97 | 13.0 | False | None | None | False | None | False | 1611.61 | 0 | | 2607306 | 81449 | None | I-12.60 P-105 V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. FIRST FLOOR ---- etc., complete with all lead | No | 1304.17 | 1304.17 | 13.0 | False | None | None | False | None | False | 16954.21 | 0 | | 2607307 | 81449 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FIRST FLOOR ---- etc., complete with all lead | Nos | 74.38 | 74.38 | 78.0 | False | None | None | False | None | False | 5801.64 | 0 | | 2607308 | 81449 | None | I-20.79 P-205 V-2 | Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. FIRST FLOOR ---- etc., complete with all lead | Rmtr | 64.46 | 64.46 | 78.3 | False | None | None | False | None | False | 5047.218 | 0 | | 2607309 | 81449 | None | I-12.90 P-110 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall
be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SECOND FLOOR ---- etc., complete with all lead | Sqm | 8348.19 | 8348.19 | 22.5 | False | None | None | False | None | False | 187834.275 | 0 | | 2607310 | 81449 | None | I-12.85 P-109 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SECOND FLOOR ---- etc., complete with all lead | Sqm | 7089.89 | 7089.89 | 3.6 | False | None | None | False | None | False | 25523.604 | 0 | | 2607311 | 81449 | None | I-11.34A P-86 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SECOND FLOOR ---- etc., complete with all lead | Kg | 208.27 | 208.27 | 548.1 | False | None | None | False | None | False | 114152.787 | 0 | | 2607312 | 81449 | None | I-12.93.1 P-111 V-2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm SECOND FLOOR ---- etc., complete with all lead | m | 870.28 | 870.28 | 58.0 | False | None | None | False | None | False | 50476.24 | 0 | | 2607313 | 81449 | None | I-12.94.1 P-112 V-2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness SECOND FLOOR ---- etc., complete with all lead | Sqm | 4320.38 | 4320.38 | 16.8 | False | None | None | False | None | False | 72582.384 | 0 | | 2607314 | 81449 | None | I-8.4.2 P-41 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) SECOND FLOOR ---- etc., complete with all lead | Sqm | 386.79 | 386.79 | 443.27 | False | None | None | False | None | False | 171452.4033 | 0 | | 2607315 | 81449 | None | I-8.10 P-42 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 261.58 | 261.58 | 481.37 | False | None | None | False | None | False | 125916.7646 | 0 | | 2607316 | 81449 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 123.97 | 123.97 | 924.63 | False | None | None | False | None | False | 114626.3811 | 0 | | 2607317 | 81449 | None | I-8.5.2 P-42 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) SECOND FLOOR ---- etc., complete with all lead | Sqm | 432.66 | 432.66 | 466.24 | False | None | None | False | None | False | 201723.3984 | 0 | | 2607318 | 81449 | None | I-8.16.2 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide SECOND FLOOR ---- etc., complete with all lead | Rmtr | 47.11 | 47.11 | 1182.0 | False | None | None | False | None | False | 55684.02 | 0 | | 2607319 | 81449 | None | I-10.5.2 P-69 S.R 2018-19 | Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 10.0 | False | None | None | False | None | False | 2832.0 | 0 | | 2607320 | 81449 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. SECOND FLOOR ---- etc., complete with all lead | Rmtr | 64.46 | 64.46 | 349.57 | False | None | None | False | None | False | 22533.2822 | 0 | | 2607321 | 81449 | None | I-9.17.2 P-61 V-2 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm SECOND FLOOR ---- etc., complete with all lead | Sqm | 1456.66 | 1456.66 | 163.11 | False | None | None | False | None | False | 237595.8126 | 0 | | 2607322 | 81449 | None | I-9.22.2 P-62 V-2 | Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm SECOND FLOOR ---- etc., complete with all lead | Sqm | 1643.85 | 1643.85 | 286.03 | False | None | None | False | None | False | 470190.4155 | 0 | | 2607323 | 81449 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 365.71 | 365.71 | 398.17 | False | None | None | False | None | False | 145614.7507 | 0 | | 2607324 | 81449 | None | I-9.24 P-63 V-2 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. SECOND FLOOR ---- etc., complete with all lead | Sqm | 3535.65 | 3535.65 | 100.58 | False | None | None | False | None | False | 355615.677 | 0 | | 2607325 | 81449 | None | I-10.1.2 P-69 V-2 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2 SECOND FLOOR ---- etc., complete with all lead | Sqm | 4880.73 | 4880.73 | 1.44 | False | None | None | False | None | False | 7028.2512 | 0 | | 2607326 | 81449 | None | I-7.18 P-23 V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. SECOND FLOOR ---- etc., complete with all lead | Cum | 2500.49 | 2500.49 | 6.73 | False | None | None | False | None | False | 16828.2977 | 0 | | 2607327 | 81449 | None | I-15.7 P-134 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) SECOND FLOOR ---- etc., complete with all lead | Sqm | 762.42 | 762.42 | 40.86 | False | None | None | False | None | False | 31152.4812 | 0 | | 2607328 | 81449 | None | I-9.11 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. SECOND FLOOR ---- etc., complete with all lead | Sqm | 1102.1 | 1102.1 | 22.44 | False | None | None | False | None | False | 24731.124 | 0 | | 2607329 | 81449 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SECOND FLOOR ---- etc., complete with all lead | Sqm | 1796.34 | 1796.34 | 112.14 | False | None | None | False | None | False | 201441.5676 | 0 | | 2607330 | 81449 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 157.44 | 157.44 | 924.63 | False | None | None | False | None | False | 145573.7472 | 0 | | 2607331 | 81449 | None | I-8.32 P-46 V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 193.39 | 193.39 | 466.24 | False | None | None | False | None | False | 90166.1536 | 0 | | 2607332 | 81449 | None | I-8.34.3 P-47 V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 61.99 | 61.99 | 26.1 | False | None | None | False | None | False | 1617.939 | 0 | | 2607333 | 81449 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 142.57 | 142.57 | 26.1 | False | None | None | False | None | False | 3721.077 | 0 | | 2607334 | 81449 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SECOND FLOOR ---- etc., complete with all lead | Sqm | 65.7 | 65.7 | 91.58 | False | None | None | False | None | False | 6016.806 | 0 | | 2607335 | 81449 | None | I-8.82 P-54 V-2 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) SECOND FLOOR ---- etc., complete with all lead | Sqm | 839.28 | 839.28 | 91.58 | False | None | None | False | None | False | 76861.2624 | 0 | | 2607336 | 81449 | None | I-15.12 P-152 V-2 | Newly Constructed Roof/Podium with PU Waterproof coating Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo-textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids greater than 85%, Tensile strength greater than 2 Mpa as per ASTM D 412, Elongation at break greater than 400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness greater than 55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. ---- etc., complete with all lead | Sqm | 1444.26 | 1444.26 | 320.34 | False | None | None | False | None | False | 462654.2484 | 0 | | 2607337 | 81449 | None | I-13.48 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- etc., complete with all lead | m | 360.76 | 360.76 | 14.4 | False | None | None | False | None | False | 5194.944 | 0 | | 2607338 | 81449 | None | I-11.16.2 P-82 V-2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead | Kg | 182.24 | 182.24 | 1119.65 | False | None | None | False | None | False | 204045.016 | 0 | | 2607339 | 81449 | None | I-7.34 P-26 V-2 | Providing and fixing 6mm Clear/opal white/solar bronze /blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work. ---- etc., complete with all lead | Sqm | 3874.09 | 3874.09 | 39.99 | False | None | None | False | None | False | 154924.8591 | 0 | | 2607340 | 81449 | None | I-9.136 P-205 V-V-1 (CPWD) | Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to bepaid for separately). SECOND FLOOR ---- etc., complete with all lead | m | 1462.75 | 1462.75 | 7.8 | False | None | None | False | None | False | 11409.45 | 0 | | 2607341 | 81449 | None | I-9.137 P-205 V-V-1 (CPWD) | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). SECOND FLOOR ---- etc., complete with all lead | Sqm | 6444.95 | 6444.95 | 3.6 | False | None | None | False | None | False | 23201.82 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 2 Upgradation of infrastructure facilities to the TLH and Staff Quarters at Holenarasipura in Hassan District. (Water Supply & Sanitary Works) (Slice-2) | 1103196.6 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2607342 | 81450 | None | I-13.50.5 P-125 V-2 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for
cold water supply including all uPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step uPVC solvent
cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge. External work 40mm dia pipes, SF ---- etc., complete with all lead | m | 376.87 | 376.87 | 25.0 | False | None | None | False | None | False | 9421.75 | 0 | | 2607343 | 81450 | None | I-13.64.1 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This
includes jointing of pipes & fittings with one step solvent cement,
trenching, refilling & testing of joints complete as per direction of
Engineer in Charge. ( Internal drainage) 75mm nominal dia pipes SF ---- etc., complete with all lead | m | 358.28 | 358.28 | 45.0 | False | None | None | False | None | False | 16122.6 | 0 | | 2607344 | 81450 | None | I-13.64.2 P-128 V-2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This
includes jointing of pipes & fittings with one step solvent cement,
trenching, refilling & testing of joints complete as per direction of
Engineer in Charge. ( Internal drainage) 110mm nominal dia pipes SF ---- etc., complete with all lead | m | 477.29 | 477.29 | 30.0 | False | None | None | False | None | False | 14318.7 | 0 | | 2607345 | 81450 | None | Sl No. 657 P-A44 V-5 | PVC pipe - OD 75mm and 6 Kg/sqcm - (Shaft Drainage) SF ---- etc., complete with all lead | m | 152.48 | 152.48 | 150.0 | False | None | None | False | None | False | 22872.0 | 0 | | 2607346 | 81450 | None | Sl No. 647 P-A44 V-5 | PVC pipe - OD 110mm and 6 Kg/sqcm - (Shaft Drainage) SF ---- etc., complete with all lead | m | 316.12 | 316.12 | 150.0 | False | None | None | False | None | False | 47418.0 | 0 | | 2607347 | 81450 | None | I-13.63 P-128 V-2 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0
cm X 4.0 cm with all fitting arrangements & all necessary accessories
complete SF ---- etc., complete with all lead | Each | 302.49 | 302.49 | 20.0 | False | None | None | False | None | False | 6049.8 | 0 | | 2607348 | 81450 | None | I-13.47 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed pipes 75 mm diameter ---- etc., complete with all lead | m | 244.22 | 244.22 | 15.0 | False | None | None | False | None | False | 3663.3 | 0 | | 2607349 | 81450 | None | I-13.48 P-125 V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed pipes 100 mm diameter ---- etc., complete with all lead | m | 360.76 | 360.76 | 50.0 | False | None | None | False | None | False | 18038.0 | 0 | | 2607350 | 81450 | None | I-14.31 P-128 V-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complete. SF ---- etc., complete with all lead | Each | 1512.44 | 1512.44 | 10.0 | False | None | None | False | None | False | 15124.4 | 0 | | 2607351 | 81450 | None | I-13.9.2 P-118 V-2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter SF ---- etc., complete with all lead | Nos | 345.88 | 345.88 | 10.0 | False | None | None | False | None | False | 3458.8 | 0 | | 2607352 | 81450 | None | I-14.22B P-135 V-2 | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic
wall mixer of quality & make as approved by Engineer in charge. SF ---- etc., complete with all lead | Each | 6895.26 | 6895.26 | 10.0 | False | None | None | False | None | False | 68952.6 | 0 | | 2607353 | 81450 | None | I-14.40.2 P-137 V-2 | Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement
of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and eTFective height of 88 mm, weighing not less than 190 g SF ---- etc., complete with all lead | Each | 614.9 | 614.9 | 10.0 | False | None | None | False | None | False | 6149.0 | 0 | | 2607354 | 81450 | None | I-14.38 P-137 V-2 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour,
weighing not less than 105 g SF ---- etc., complete with all lead | Each | 179.76 | 179.76 | 10.0 | False | None | None | False | None | False | 1797.6 | 0 | | 2607355 | 81450 | None | I-13.16 P-119 V-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 SF ---- etc., complete with all lead | Each | 768.62 | 768.62 | 40.0 | False | None | None | False | None | False | 30744.8 | 0 | | 2607356 | 81450 | None | I-14.3.1 P-131 V-2 | Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush
bend, overflow arrangement with specials of standard make and mosquito
proof coupling of approved municipal design complete, including
painting of fittings and brackets, cutting and making good the walls and
floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid SF ---- etc., complete with all lead | Each | 7409.73 | 7409.73 | 10.0 | False | None | None | False | None | False | 74097.3 | 0 | | 2607357 | 81450 | None | I-13.15 P-119 V-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. SF ---- etc., complete with all lead | Nos | 898.79 | 898.79 | 10.0 | False | None | None | False | None | False | 8987.9 | 0 | | 2607358 | 81450 | None | I-14.7.1 P-132 V-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps SF ---- etc., complete with all lead | Each | 3820.78 | 3820.78 | 10.0 | False | None | None | False | None | False | 38207.8 | 0 | | 2607359 | 81450 | None | I-14.22A P-135 V-2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. SF ---- etc., complete with all lead | Each | 1004.16 | 1004.16 | 10.0 | False | None | None | False | None | False | 10041.6 | 0 | | 2607360 | 81450 | None | I-13.8.1.1 P-118 V-2 | Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) SF ---- etc., complete with all lead | Each | 102.9 | 102.9 | 10.0 | False | None | None | False | None | False | 1029.0 | 0 | | 2607361 | 81450 | None | I-14.37.1 P-137 V-2 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260 g SF ---- etc., complete with all lead | Each | 379.35 | 379.35 | 10.0 | False | None | None | False | None | False | 3793.5 | 0 | | 2607362 | 81450 | None | I-14.36.1 P-137 V-2 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of
approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g SF ---- etc., complete with all lead | Each | 111.57 | 111.57 | 10.0 | False | None | None | False | None | False | 1115.7 | 0 | | 2607363 | 81450 | None | I-13.2.1 P-115 V-2 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore SF ---- etc., complete with all lead | Nos | 354.56 | 354.56 | 10.0 | False | None | None | False | None | False | 3545.6 | 0 | | 2607364 | 81450 | None | I-13.32.1 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer in
Charge. Concealed work, including cutting chases and making good the
walls etc. 15 mm nominal dia Pipes SF ---- etc., complete with all lead | m | 383.07 | 383.07 | 80.0 | False | None | None | False | None | False | 30645.6 | 0 | | 2607365 | 81450 | None | I-13.32.2 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer in
Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes SF ---- etc., complete with all lead | m | 469.85 | 469.85 | 185.0 | False | None | None | False | None | False | 86922.25 | 0 | | 2607366 | 81450 | None | I-13.32.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer in
Charge. Concealed work, including cutting chases and making good the
walls etc. 25 mm nominal dia pipes SF ---- etc., complete with all lead | m | 591.34 | 591.34 | 175.0 | False | None | None | False | None | False | 103484.5 | 0 | | 2607367 | 81450 | None | I-13.33.3 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of joints
complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes SF ---- etc., complete with all lead | m | 366.95 | 366.95 | 100.0 | False | None | None | False | None | False | 36695.0 | 0 | | 2607368 | 81450 | None | I-13.33.6 P-122 V-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of joints
complete as per direction of Engineer in Charge. External work 50mm nominal dia Pipes SF ---- etc., complete with all lead | m | 893.83 | 893.83 | 90.0 | False | None | None | False | None | False | 80444.7 | 0 | | 2607369 | 81450 | None | I-13.5.2 P-115 V-2 | Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete : 25 mm nominal bore SF ---- etc., complete with all lead | Nos | 411.58 | 411.58 | 6.0 | False | None | None | False | None | False | 2469.48 | 0 | | 2607370 | 81450 | None | I-13.4.2 P-117 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore SF ---- etc., complete with all lead | Nos. | 741.35 | 741.35 | 2.0 | False | None | None | False | None | False | 1482.7 | 0 | | 2607371 | 81450 | None | I-13.4.4 P-117 V-2 | Providing and fixing Brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 50 mm nominal bore SF ---- etc., complete with all lead | Nos | 1059.95 | 1059.95 | 4.0 | False | None | None | False | None | False | 4239.8 | 0 | | 2607372 | 81450 | None | I-13.6.4.1 P-118 V-2 | Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 50 mm nominal bore Horizontal SF ---- etc., complete with all lead | Nos | 1687.24 | 1687.24 | 4.0 | False | None | None | False | None | False | 6748.96 | 0 | | 2607373 | 81450 | None | ELE 7.3.2 P-34 Ele S.R 2023-24 | Supplying, installation, testing and commissioning of solar hot water
heater comprising of solar Flat Plate Collector (FPC) of size
2120x1040x100mm and stainless steel hot water storage tank with
stainless steel heat exchanger absorber made of copper sheet and
copper tube of following capacity aluminium box collector with
appropriate capacity electrical back up arrangement excluding inlet
and out let pipes. SS Model with 100mm thick of 48Kg/M3 density
Rock wool insulation with 22SWG Aluminium cladding. 200 L ---- etc., complete with all lead | Each | 58159.66 | 58159.66 | 1.0 | False | None | None | False | None | False | 58159.66 | 0 | | 2607374 | 81450 | None | I-13.34 P-123 V-2 | Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank. ---- etc., complete with all lead | Ltr | 11.16 | 11.16 | 3000.0 | False | None | None | False | None | False | 33480.0 | 0 | | 2607375 | 81450 | None | Approved Rate | Drilling holes of 2.50 cms dia (roof/chajja/stone). in slabs upto 7.50 cms thick ---- etc., complete with all lead | Nos | 154.58 | 154.58 | 15.0 | False | None | None | False | None | False | 2318.7 | 0 | | 2607376 | 81450 | None | Approved Rate | Drilling holes of 2.50 cms dia (roof/chajja/stone). in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 185.26 | 185.26 | 10.0 | False | None | None | False | None | False | 1852.6 | 0 | | 2607377 | 81450 | None | Approved Rate | Air Vent Cowel 75mm ---- etc., complete with all lead | Nos | 413.0 | 413.0 | 6.0 | False | None | None | False | None | False | 2478.0 | 0 | | 2607378 | 81450 | None | Approved Rate | Air Vent Cowel 110mm ---- etc., complete with all lead | Nos | 590.0 | 590.0 | 6.0 | False | None | None | False | None | False | 3540.0 | 0 | | 2607379 | 81450 | None | Page.91 I.No.12.111) | Providing and fixing 7.50cms to 15cms dia N.P. Grating 100mm dia. ---- etc., complete with all lead | Each | 177.0 | 177.0 | 10.0 | False | None | None | False | None | False | 1770.0 | 0 | | 2607380 | 81450 | None | Approved Rate | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. (Jaguar make or Equalent) ---- etc., complete with all lead | Nos | 2183.0 | 2183.0 | 10.0 | False | None | None | False | None | False | 21830.0 | 0 | | 2607381 | 81450 | None | P-1.4.1 P-6 V-1 | Earth work excavation by manual means for drains,canals, waste weir,
draft, approach channels, key trenches, foundation of bridges and
such simillar works in all kinds of soils , as per drawing and technical
specifications, including setting out, shoring, strutting, barricading,
caution lights, removal of stumps and other deleterious matter,
excavated surface leveled and sides neatly dressed disposing off the
excavated stuff or sorting & stacking the selected stuff for reuse in a
radius of 50 m and lift upto 1.5 m including cost of labour, tools & other
appurtenaces required to complete the work. ---- etc., complete with all lead | Cum | 294.13 | 294.13 | 52.0 | False | None | None | False | None | False | 15294.76 | 0 | | 2607382 | 81450 | None | I-1.11 P-7 V-1 | Filling approved earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm
in depth, consolidating each deposited layer by ramming and watering,
lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 526.27 | 526.27 | 52.0 | False | None | None | False | None | False | 27366.04 | 0 | | 2607383 | 81450 | None | I-10.3.7 P-114 V-5 | Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying true to
line and level and perfect linking at joints, testing and commissioning,
including loading and unloading at both destinations and cuts of pipes
wherever necessary including jointing of UPVC pipes (with cost of
elastomeric sealing rings) and specials (excluding cost of specials) with
jointing of approved type, with all labour, lead & lifts, including encasing
the pipes alround to a depth of not less than 15 cms. with soft gravel
or selected earth available from the excavation etc. complete and giving
necessary hydraulic test to the required pressure as per ISS (contractor
will make his own arrangements for procuring water for testing) etc.
complete. for: EXTERNAL SANITARY WORK Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete with all lead | m | 749.9 | 749.9 | 65.0 | False | None | None | False | None | False | 48743.5 | 0 | | 2607384 | 81450 | None | I-10.2.4 P-114 V-5 | Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013
with latest amendments ended with integral sockets with ISI mark and
conveying to worksite, rolling and lowering into trenches, laying true to
line and level and perfect linking at joints, testing and commissioning,
including loading and unloading at both destinations and cuts of pipes
wherever necessary including jointing of UPVC pipes (with cost of
elastomeric sealing rings) and specials (excluding cost of specials) with
jointing of approved type, with all labour, lead & lifts, including encasing
the pipes alround to a depth of not less than 15 cms. with soft gravel
or selected earth available from the excavation etc. complete and giving
necessary hydraulic test to the required pressure as per ISS (contractor
will make his own arrangements for procuring water for testing) etc.
complete for EXTERNAL RAIN WATER Pipes of SN4, 160mm dia. ---- etc., complete with all lead | m | 700.07 | 700.07 | 50.0 | False | None | None | False | None | False | 35003.5 | 0 | | 2607385 | 81450 | None | I-16.9 P-191 V-5 | Constructing brick masonry chamber of internal dimension 600x600mm
and depth of 600mm (inner dimensions) with modular bricks of CD 75
in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering
12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc., complete with all lead | Each | 6628.79 | 6628.79 | 10.0 | False | None | None | False | None | False | 66287.9 | 0 | | 2607386 | 81450 | None | I-13.39 P-124 V-2 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber 150 x 100 mm size P type With
Non Modular common burnt clay bricks of designation 3.5 & with water
tight C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as
per standard design: ---- etc., complete with all lead | Nos | 3136.95 | 3136.95 | 6.0 | False | None | None | False | None | False | 18821.7 | 0 | | 2607387 | 81450 | None | I-13.23 P-121 V-2 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less than 1240 g) ---- etc., complete with all lead | No | 1633.5 | 1633.5 | 5.0 | False | None | None | False | None | False | 8167.5 | 0 |
| | 1707999045000 | 0 | None | None | Buildings | 2 Upgradation of infrastructure facilities to the TLH and Staff Quarters at Holenarasipura in Hassan District. (Electrical Works and Consultancy Charges) (Slice-2) | 789111.81 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2607388 | 81451 | None | 2.2.1 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each
outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 326.94 | 326.94 | 9.0 | False | None | None | False | None | False | 2942.46 | 0 | | 2607389 | 81451 | None | 2.2.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each
outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 460.64 | 460.64 | 20.0 | False | None | None | False | None | False | 9212.8 | 0 | | 2607390 | 81451 | None | 2.2.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each
outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 674.55 | 674.55 | 40.0 | False | None | None | False | None | False | 26982.0 | 0 | | 2607391 | 81451 | None | 2.2.4 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each
outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete with all lead | Point | 822.83 | 822.83 | 7.0 | False | None | None | False | None | False | 5759.81 | 0 | | 2607392 | 81451 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way ---- etc., complete with all lead | Each | 167.73 | 167.73 | 20.0 | False | None | None | False | None | False | 3354.6 | 0 | | 2607393 | 81451 | None | 3.4.2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead | Each | 193.25 | 193.25 | 15.0 | False | None | None | False | None | False | 2898.75 | 0 | | 2607394 | 81451 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead | Each | 215.13 | 215.13 | 12.0 | False | None | None | False | None | False | 2581.56 | 0 | | 2607395 | 81451 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead | Each | 267.39 | 267.39 | 8.0 | False | None | None | False | None | False | 2139.12 | 0 | | 2607396 | 81451 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead | Each | 317.22 | 317.22 | 20.0 | False | None | None | False | None | False | 6344.4 | 0 | | 2607397 | 81451 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead | Each | 387.71 | 387.71 | 25.0 | False | None | None | False | None | False | 9692.75 | 0 | | 2607398 | 81451 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete with all lead | Each | 166.51 | 166.51 | 20.0 | False | None | None | False | None | False | 3330.2 | 0 | | 2607399 | 81451 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module ---- etc., complete with all lead | Each | 195.68 | 195.68 | 15.0 | False | None | None | False | None | False | 2935.2 | 0 | | 2607400 | 81451 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete with all lead | Each | 212.7 | 212.7 | 12.0 | False | None | None | False | None | False | 2552.4 | 0 | | 2607401 | 81451 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete with all lead | Each | 284.4 | 284.4 | 8.0 | False | None | None | False | None | False | 2275.2 | 0 | | 2607402 | 81451 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead | Each | 345.17 | 345.17 | 20.0 | False | None | None | False | None | False | 6903.4 | 0 | | 2607403 | 81451 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete with all lead | Each | 418.1 | 418.1 | 25.0 | False | None | None | False | None | False | 10452.5 | 0 | | 2607404 | 81451 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead | Each | 123.97 | 123.97 | 121.0 | False | None | None | False | None | False | 15000.37 | 0 | | 2607405 | 81451 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead | Each | 201.76 | 201.76 | 2.0 | False | None | None | False | None | False | 403.52 | 0 | | 2607406 | 81451 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead | Each | 207.83 | 207.83 | 45.0 | False | None | None | False | None | False | 9352.35 | 0 | | 2607407 | 81451 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead | Each | 433.9 | 433.9 | 12.0 | False | None | None | False | None | False | 5206.8 | 0 | | 2607408 | 81451 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 396.22 | 396.22 | 9.0 | False | None | None | False | None | False | 3565.98 | 0 | | 2607409 | 81451 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead | Each | 286.83 | 286.83 | 10.0 | False | None | None | False | None | False | 2868.3 | 0 | | 2607410 | 81451 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete with all lead | Each | 218.77 | 218.77 | 1.0 | False | None | None | False | None | False | 218.77 | 0 | | 2607411 | 81451 | None | I-1.13 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | No | 142.2 | 142.2 | 12.0 | False | None | None | False | None | False | 1706.4 | 0 | | 2607412 | 81451 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 80.22 | 80.22 | 500.0 | False | None | None | False | None | False | 40110.0 | 0 | | 2607413 | 81451 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead | m | 94.8 | 94.8 | 650.0 | False | None | None | False | None | False | 61620.0 | 0 | | 2607414 | 81451 | None | 1.2.3 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 32mm dia 2.5mm thick ---- etc., complete with all lead | m | 125.19 | 125.19 | 100.0 | False | None | None | False | None | False | 12519.0 | 0 | | 2607415 | 81451 | None | 1.3.1 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 82.65 | 82.65 | 250.0 | False | None | None | False | None | False | 20662.5 | 0 | | 2607416 | 81451 | None | 1.3.2 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead | m | 96.02 | 96.02 | 325.0 | False | None | None | False | None | False | 31206.5 | 0 | | 2607417 | 81451 | None | 1.3.3 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete with all lead | m | 120.32 | 120.32 | 50.0 | False | None | None | False | None | False | 6016.0 | 0 | | 2607418 | 81451 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 1.5 sqmm ---- etc., complete with all lead | m | 31.6 | 31.6 | 300.0 | False | None | None | False | None | False | 9480.0 | 0 | | 2607419 | 81451 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 2.5 sqmm ---- etc., complete with all lead | m | 51.05 | 51.05 | 1000.0 | False | None | None | False | None | False | 51050.0 | 0 | | 2607420 | 81451 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 4 sqmm ---- etc., complete with all lead | m | 76.57 | 76.57 | 400.0 | False | None | None | False | None | False | 30628.0 | 0 | | 2607421 | 81451 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments. 6 sqmm ---- etc., complete with all lead | m | 111.82 | 111.82 | 400.0 | False | None | None | False | None | False | 44728.0 | 0 | | 2607422 | 81451 | None | 5.19.11 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4 Way TP & N ---- etc., complete with all lead | Each | 4907.79 | 4907.79 | 1.0 | False | None | None | False | None | False | 4907.79 | 0 | | 2607423 | 81451 | None | 5.19.12 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete with all lead | Each | 6004.08 | 6004.08 | 1.0 | False | None | None | False | None | False | 6004.08 | 0 | | 2607424 | 81451 | None | 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead | Each | 504.39 | 504.39 | 30.0 | False | None | None | False | None | False | 15131.7 | 0 | | 2607425 | 81451 | None | 5.18.8 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead | Each | 3699.68 | 3699.68 | 1.0 | False | None | None | False | None | False | 3699.68 | 0 | | 2607426 | 81451 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead | Each | 3753.16 | 3753.16 | 1.0 | False | None | None | False | None | False | 3753.16 | 0 | | 2607427 | 81451 | None | 5.20.8 | Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete with all lead | Each | 6255.66 | 6255.66 | 2.0 | False | None | None | False | None | False | 12511.32 | 0 | | 2607428 | 81451 | None | I-32.09 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc., complete with all lead | Km | 187246.95 | 187246.95 | 0.1 | False | None | None | False | None | False | 18724.695 | 0 | | 2607429 | 81451 | None | I-31.06 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete with all lead | Km | 37846.34 | 37846.34 | 0.1 | False | None | None | False | None | False | 3784.634 | 0 | | 2607430 | 81451 | None | 6.17.8 S.R 2019-20 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete with all lead | Each | 38.89 | 38.89 | 8.0 | False | None | None | False | None | False | 311.12 | 0 | | 2607431 | 81451 | None | 11.5.2 | Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ---- etc., complete with all lead | Each | 1075.63 | 1075.63 | 15.0 | False | None | None | False | None | False | 16134.45 | 0 | | 2607432 | 81451 | None | 11.3.2 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead | Each | 838.63 | 838.63 | 26.0 | False | None | None | False | None | False | 21804.38 | 0 | | 2607433 | 81451 | None | 11.11.3 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead | Each | 181.09 | 181.09 | 11.0 | False | None | None | False | None | False | 1991.99 | 0 | | 2607434 | 81451 | None | 11.11.5 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete with all lead | Each | 326.94 | 326.94 | 9.0 | False | None | None | False | None | False | 2942.46 | 0 | | 2607435 | 81451 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1813.38 | 1813.38 | 10.0 | False | None | None | False | None | False | 18133.8 | 0 | | 2607436 | 81451 | None | 6.4.1 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete with all lead | Each | 3253.63 | 3253.63 | 12.0 | False | None | None | False | None | False | 39043.56 | 0 | | 2607437 | 81451 | None | I-12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead | Each | 76.57 | 76.57 | 20.0 | False | None | None | False | None | False | 1531.4 | 0 | | 2607438 | 81451 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 148.28 | 148.28 | 38.0 | False | None | None | False | None | False | 5634.64 | 0 | | 2607439 | 81451 | None | I-13.11 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size
wooden board and wired. ---- etc., complete with all lead | Each | 382.85 | 382.85 | 12.0 | False | None | None | False | None | False | 4594.2 | 0 | | 2607440 | 81451 | None | I-13.13 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 859.29 | 859.29 | 10.0 | False | None | None | False | None | False | 8592.9 | 0 | | 2607441 | 81451 | None | 15.17.1 | Supplying and fixing regular MCCB distribution Panel confirming to
IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum
IP43 protection provided with Polyurethane (PUR) gasket, with
suitable earthing system, on wall/wood board/flush mounting using
required cl A , bolts, nuts, etc., with provision for fixing of suitable
type capacity MCCB's as an incomer for 3 phase Double door with
necessary bus bar completely wired to use on 440V 3phase 4 wire
powder coated painting etc., complete with a provision for fixing of
single/three phase suitable capacity MCB's as outgoings confirming to
IS/IEC 60898 - 2. 4WAY ---- etc., complete with all lead | Each | 12553.87 | 12553.87 | 1.0 | False | None | None | False | None | False | 12553.87 | 0 | | 2607442 | 81451 | None | 5.14.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 100Amps 25kA ---- etc., complete with all lead | Each | 10315.1 | 10315.1 | 1.0 | False | None | None | False | None | False | 10315.1 | 0 | | 2607443 | 81451 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead | Each | 3753.16 | 3753.16 | 4.0 | False | None | None | False | None | False | 15012.64 | 0 | | 2607444 | 81451 | None | 3.6.12 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 RJ45/ I.O. outlet Cat 6 ---- etc., complete with all lead | Each | 409.59 | 409.59 | 12.0 | False | None | None | False | None | False | 4915.08 | 0 | | 2607445 | 81451 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Telephone socket ---- etc., complete with all lead | Each | 189.6 | 189.6 | 2.0 | False | None | None | False | None | False | 379.2 | 0 | | 2607446 | 81451 | None | I-8.1 | Supplying and drawing UTP-CAT 6E LAN cable. ---- etc., complete with all lead | m | 46.19 | 46.19 | 100.0 | False | None | None | False | None | False | 4619.0 | 0 | | 2607447 | 81451 | None | 8.10.1 | Supplying & Fixing of I/O Socket with back box Single I/O ---- etc., complete with all lead | Each | 595.55 | 595.55 | 2.0 | False | None | None | False | None | False | 1191.1 | 0 | | 2607448 | 81451 | None | 8.11.1 | Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr ---- etc., complete with all lead | Each | 312.36 | 312.36 | 2.0 | False | None | None | False | None | False | 624.72 | 0 | | 2607449 | 81451 | None | 8.2.2 | Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. ---- etc., complete with all lead | m | 25.52 | 25.52 | 300.0 | False | None | None | False | None | False | 7656.0 | 0 | | 2607450 | 81451 | None | 8.13.2 | Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- etc., complete with all lead | Each | 465.5 | 465.5 | 1.0 | False | None | None | False | None | False | 465.5 | 0 | | 2607451 | 81451 | None | Approved Rate | TELEPHONES Analog push button telephone with Caller ID, flash and radial ---- etc., complete with all lead | Nos | 2124.0 | 2124.0 | 12.0 | False | None | None | False | None | False | 25488.0 | 0 | | 2607452 | 81451 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. ---- etc., complete with all lead | m | 94.8 | 94.8 | 200.0 | False | None | None | False | None | False | 18960.0 | 0 | | 2607453 | 81451 | None | 66.0.0 | Preparation of detailed Architectural drawings,Structural design and drawings including Soil exploration as per I.S Codes and proof checking by IISC/NIT/IIT only as decided by the Department and the same has to be furnished to the Department for approval and also providing consultancy for Architectural & structural designs & Drawings and Elevations floor wise, preparation of internal and external Electrical works schematic drawings and working drawings for public health engineering working drawings, interior layout etc and liaison with other department and approval of pollution control board & any other statutory approval from the concerned dept and drawings related to this project. (6 sets of as built drawings shall be submitted to the employer) Note - All required service GFC drawings required for completion of projects. - etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work.
---- etc., complete with all lead | LS | 51000.0 | 51000.0 | 1.0 | False | None | None | False | None | False | 51000.0 | 0 |
|
|
|---|