| 2675763 | 83376 | None | code01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work - In all kinds of soils upto 300 mm depth | Cum | 97.85 | 97.85 | 126.0 | False | None | None | False | None | False | 12329.1 | 0 |
| 2675764 | 83376 | None | code02 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 | Cum | 507.79 | 507.79 | 211.064 | False | None | None | False | None | False | 107176.18856 | 0 |
| 2675765 | 83376 | None | code03 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | Cum | 2635.77 | 2635.77 | 122.61 | False | None | None | False | None | False | 323171.7597 | 0 |
| 2675766 | 83376 | None | code04 | Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. | Sqm | 42.23 | 42.23 | 420.0 | False | None | None | False | None | False | 17736.6 | 0 |
| 2675767 | 83376 | None | code05 | Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction | Cum | 7890.83 | 7890.83 | 21.0 | False | None | None | False | None | False | 165707.43 | 0 |
| 2675768 | 83376 | None | code06 | Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom | Sqm | 12.36 | 12.36 | 420.0 | False | None | None | False | None | False | 5191.2 | 0 |
| 2675769 | 83376 | None | code07 | Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed, aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision | Cum | 10456.56 | 10456.56 | 10.5 | False | None | None | False | None | False | 109793.88 | 0 |
| 2675770 | 83376 | None | code08 | Dismantling of Cement Concrete Pavement Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3
in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately | Cum | 579.89 | 579.89 | 48.262 | False | None | None | False | None | False | 27986.65118 | 0 |
| 2675771 | 83376 | None | code09 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other
appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m | Cum | 249.26 | 249.26 | 70.362 | False | None | None | False | None | False | 17538.43212 | 0 |
| 2675772 | 83376 | None | code10 | Providing and laying in position plain cement concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshall be paid separately Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6403.51 | 6403.51 | 10.1475 | False | None | None | False | None | False | 64979.617725 | 0 |
| 2675773 | 83376 | None | code11 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) | Sqm | 1195.83 | 1195.83 | 386.099 | False | None | None | False | None | False | 461708.76717 | 0 |
| 2675774 | 83376 | None | code12 | Providing Size Stone masonry with hard stone in foundation & plinth
with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6580.67 | 6580.67 | 18.0 | False | None | None | False | None | False | 118452.06 | 0 |
| 2675775 | 83376 | None | code13 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6475.61 | 6475.61 | 6.372 | False | None | None | False | None | False | 41262.58692 | 0 |
| 2675776 | 83376 | None | code14 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.
a. Buildings | Tonne | 92140.71 | 92140.71 | 0.0864 | False | None | None | False | None | False | 7960.957344 | 0 |
| 2675777 | 83376 | None | code15 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specificationsand as per directions of Engineer-in-charge. | Sqm | 262.65 | 262.65 | 54.0 | False | None | None | False | None | False | 14183.1 | 0 |
| 2675778 | 83376 | None | code16 | Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding
20cm in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m. | Sqm | 273.98 | 273.98 | 10.8 | False | None | None | False | None | False | 2958.984 | 0 |
| 2675779 | 83376 | None | code17 | Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing
, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge.
** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye,
River Pink or equivalent | Sqm | 2937.56 | 2937.56 | 30.0 | False | None | None | False | None | False | 88126.8 | 0 |
| 2675780 | 83376 | None | code18 | Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM etc., complete as per specification | m | 185.4 | 185.4 | 120.0 | False | None | None | False | None | False | 22248.0 | 0 |
| 2675781 | 83376 | None | code19 | Providing and constructing vertical /inclined graded filter media using
2.46. clean, hard graded sand and coarse aggregates from approved source
satisfying specified filter creteria in layers of specified thickness including
cost of all materials, machinery, labour, laying to required slopes,
compacting etc., complete as per specifications and approved drawings
complete with all lead and lifts.
2.46.1 Sand layer. | Cum | 2018.8 | 2018.8 | 35.379 | False | None | None | False | None | False | 71423.1252 | 0 |
| 2675782 | 83376 | None | code20 | Double LDPE Slide: Made up of GI B-class structure materials. The sliding portion is made up of LDPE. The platform is made out of antiskid platform. The pillars of the platform are made up of 90 mm GI pipes. The ladder is made up of 75 X 25 mm CR pipe. The railings of the ladder are made up of 20mm GI pipes. Height of the slide 4 feet and length 8.5 feet. All pipes are ISI Grade. All welded joints are scalloped and sharp edges and burrs are removed. The metal powder coated with foundation extension. Safe area is 18’ X 6’. The rates are to be inclusive of supply and installation at site, Inclusive of Transportation Charges but Exclusive of GST | Each | 126000.0 | 126000.0 | 1.0 | False | None | None | False | None | False | 126000.0 | 0 |
| 2675783 | 83376 | None | code21 | U Swing 2 Seater: Made up of GI B-class structure materials. The top beam is made up of 80 mm GI pipes housing 4 bearing sockets each containing 2 ball bearings. The Structure i.e., the legs is made up of 80 mm GI pipes. The swing comes with rubberised chains and seats are made out of FRP. The length of the equipment is 8’. Height of the equipment is 7’ (After installation). Shaped structural are to be schedule HOT DIP Galvanized steel with 80 mm OD. All pipes are ISI Grade. All welded joints are scalloped and sharp edges and burrs are removed. The above equipment is powder coated with foundation extension. Safe area is 14’ X 7’. The rates are to be inclusive of supply and installation at site,Inclusive of Transportation Charges but Exclusive of GST | Each | 90000.0 | 90000.0 | 1.0 | False | None | None | False | None | False | 90000.0 | 0 |
| 2675784 | 83376 | None | code22 | Merry Go Round: Made up of GI B-class structure materials. The center shaft is
made up of 100 mm GI pipe housing a set of ball bearing and taper roller bearing.
Cross pipes are 25 & 20 mm GI pipes. The height of the equipment is 2.5’ (After
installation), the platform is made up of anti skid sheet. Spinning diameter of the
equipment is 1.2 mtrs. All pipes are ISI Grade. All welded joints are scalloped and
sharp edges and burrs are removed. The above equipment is duly powder coated
with foundation extension. Safe area is 8’ X 8’. The rates are to be inclusive of supply
and installation at site, Inclusive of Transportation Charges but Exclusive of GST | Each | 50000.0 | 50000.0 | 1.0 | False | None | None | False | None | False | 50000.0 | 0 |
| 2675785 | 83376 | None | code23 | Four Seater See - Saw Made up of GI B class structure materials. The main beam is made up of 80mm OD GI pipes. The Structure i.e., the legs are made up of 42mm OD pipes housing a heavy duty metal bush of pivot type Mechanism. Handles are made up of 15mm OD GI pipe. The seats are made out of LLDPE Cycle Seat 4 Nos. Height of the equipment is 18” (After installation). Length of the Main Beam 9’ The above equipment is powder coated with foundation extension. Safe area is 14’ X 5’. The rates are to be inclusive of supply and installation at site, Inclusive of
Transportation Charges but Exclusive of GST | Each | 55000.0 | 55000.0 | 1.0 | False | None | None | False | None | False | 55000.0 | 0 |
| 2675786 | 83376 | None | code24 | 4.2Fabricating, supplying and erection of ... ms long hot dipGalvanized Octagonal hot dip Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelitesheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick,suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single
dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.
4.2.2 4 m - Top 70 mm and Bottom 130 mm dia | Each | 8200.0 | 8200.0 | 4.0 | False | None | None | False | None | False | 32800.0 | 0 |
| 2675787 | 83376 | None | code25 | 11.7Supply of LED pole mounting type post top lantern withpressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr AT Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be
given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.
11.7.2 LED Post Top Lantern with 25/30 W Each | Each | 7912.0 | 7912.0 | 4.0 | False | None | None | False | None | False | 31648.0 | 0 |
| 2675788 | 83376 | None | code26 | 11.8Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB.
Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility
accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned 11.8.1 LED Streetlight 25W No | Each | 2425.0 | 2425.0 | 4.0 | False | None | None | False | None | False | 9700.0 | 0 |
| 2675789 | 83376 | None | code27 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm | m | 26.0 | 26.0 | 20.0 | False | None | None | False | None | False | 520.0 | 0 |
| 2675790 | 83376 | None | code28 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm | m | 42.0 | 42.0 | 30.0 | False | None | None | False | None | False | 1260.0 | 0 |
| 2675791 | 83376 | None | code29 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm | m | 63.0 | 63.0 | 30.0 | False | None | None | False | None | False | 1890.0 | 0 |
| 2675792 | 83376 | None | code30 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. | Each | 326.0 | 326.0 | 4.0 | False | None | None | False | None | False | 1304.0 | 0 |
| 2675793 | 83376 | None | code31 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. | Sq CM | 0.41 | 0.41 | 2000.0 | False | None | None | False | None | False | 820.0 | 0 |
| 2675794 | 83376 | None | code32 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps | Each | 241.0 | 241.0 | 3.0 | False | None | None | False | None | False | 723.0 | 0 |
| 2675795 | 83376 | None | code33 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 2675796 | 83376 | None | code34 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N | Each | 1492.0 | 1492.0 | 1.0 | False | None | None | False | None | False | 1492.0 | 0 |
| 2675797 | 83376 | None | code35 | Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmallroundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia | Each | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 |