createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1708508929280 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 750.00 emd 75000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 28-02-2024 16:00:00 tenderQueryClose 26-02-2024 16:00:00 technicalBidOpen None publishedDate 21-02-2024 15:27:54 publishedByPost RDPR_EE_DIV_MYS publishedByUser KPE12936 - R RAMESH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Jacob splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8123267587 tenderSupplierList None
tenderSchedule	createdTs 1708508929322 version 4 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT4724 title Construction of School Building in Higher Primary School in Bogadhi of Mysuru Taluk(GEN) description Construction of School Building in Higher Primary School in Bogadhi of Mysuru Taluk(GEN) category WORKS categoryText Works ecv 3000000.00 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 960 locationName RDPR Division Office Mysuru provisionalAmount 3000000.0 groupOverheadTotal 472283.8 fileNumber 21/JE/PRE/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1708508929000 0 None None Buildings Construction of School Building in Higher Primary School in Bogadhi of Mysuru Taluk 2527716.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2736852 86774 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m. Cum 105.06 105.06 34.235 False None None False None False 3596.7291 0 2736853 86774 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth. (SR-2023-24, Volume-I, Chapter-01,Page No.08, Iteam No.1.15.1). Cum 373.89 373.89 40.64 False None None False None False 15194.8896 0 2736854 86774 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications..Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Cum 6074.94 6074.94 30.72 False None None False None False 186622.1568 0 2736855 86774 None code04 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with. Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 15.73 False None None False None False 90908.8609 0 2736856 86774 None code05 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6391.15 6391.15 10.37 False None None False None False 66276.2255 0 2736857 86774 None code06 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (SR-2023-24, Volume-I, Chapter-01,Page No.07, Iteam No.1.9). Cum 273.98 273.98 54.75 False None None False None False 15000.405 0 2736858 86774 None code07 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.(P.No.44 /I.No. 8.19.1 of CSR 2021-22, Volume-II, Chapter-8) Sqm 204.97 204.97 15.74 False None None False None False 3226.2278 0 2736859 86774 None code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.15, Item No.2.2.1) Cum 6664.21 6664.21 11.77 False None None False None False 78437.7517 0 2736860 86774 None code09 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.15, Item No.2.2.1) Plinth Beam Cum 9619.11 9619.11 3.79 False None None False None False 36456.4269 0 2736861 86774 None code10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.15, Item No.2.2.1) Flagging concrete Cum 6287.0 6287.0 3.6 False None None False None False 22633.2 0 2736862 86774 None code11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Cum 11838.39 11838.39 6.78 False None None False None False 80264.2842 0 2736863 86774 None code12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labor, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Chajja (w) Cum 10127.64 10127.64 0.43 False None None False None False 4354.8852 0 2736864 86774 None code13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, I team No.2.5.2)Lintel Beam Cum 11154.09 11154.09 9.3 False None None False None False 103733.037 0 2736865 86774 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Roof Cum 10469.79 10469.79 20.97 False None None False None False 219551.4963 0 2736866 86774 None code15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Head room Cum 11956.77 11956.77 0.6 False None None False None False 7174.062 0 2736867 86774 None code16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Chajja (w) Cum 10228.91 10228.91 0.22 False None None False None False 2250.3602 0 2736868 86774 None code17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Lintel Beam Cum 11265.63 11265.63 1.86 False None None False None False 20954.0718 0 2736869 86774 None code18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Roof Cum 10574.48 10574.48 2.85 False None None False None False 30137.268 0 2736870 86774 None code19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification Buildings. (SR-2023-24, Volume-I, Chapter-02,Page No.18, Item No.2.11.a) MT 92140.71 92140.71 4.3757 False None None False None False 403180.104747 0 2736871 86774 None code20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancillary operations complete as per drawing and technical specification. Buildings. (SR-2023-24, Volume-I, Chapter-02,Page No.18, Item No.2.11.a) Head room MT 93062.11 93062.11 0.5054 False None None False None False 47033.590394 0 2736872 86774 None code21 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work.(SR-2023-24, Volume II, Chapter-06, Page No.13, Item No. 6.2) Cum 8217.34 8217.34 28.72 False None None False None False 236002.0048 0 2736873 86774 None code22 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work.(SR-2023-24, Volume II, Chapter-06, Page No.13, Item No. 6.2)Head Room Cum 8299.51 8299.51 11.31 False None None False None False 93867.4581 0 2736874 86774 None code23 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR-2023-24, Volume II, Chapter-11, Page No.82,Item No. 11.16.2) Kgs 151.41 151.41 71.94 False None None False None False 10892.4354 0 2736875 86774 None code24 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR-2023-24, Volume II, Chapter-11, Page No.82,Item No. 11.16.2) Head room Kgs 152.92 152.92 35.97 False None None False None False 5500.5324 0 2736876 86774 None code25 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (SR-2023-24, Volume II, Chapter-11, Page No.77.0,Item No. 11.5.1) Sqm 4612.34 4612.34 5.04 False None None False None False 23246.1936 0 2736877 86774 None code26 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (SR-2023-24, Volume II, Chapter-11, Page No.77.0,Item No. 11.5.1) Head room Sqm 4658.46 4658.46 2.52 False None None False None False 11739.3192 0 2736878 86774 None code27 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (SR-2023-24, Volume II, Chapter-11, Page No.86,Item No. 11.34A) Kgs 173.04 173.04 272.15 False None None False None False 47092.836 0 2736879 86774 None code28 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (SR-2023-24, Volume II, Chapter-11, Page No.86,Item No. 11.34A) Head room Kgs 174.77 174.77 37.8 False None None False None False 6606.306 0 2736880 86774 None code29 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labor, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR-2023-24, Volume II, Chapter-11, Page No.79.0,Item No. 11.11.1) Kgs 152.44 152.44 246.24 False None None False None False 37536.8256 0 2736881 86774 None code30 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitered and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR-2023-24, Volume II, Chapter-11, Page No.79.0,Item No. 11.11.1) Head Room Kgs 153.96 153.96 34.2 False None None False None False 5265.432 0 2736882 86774 None code31 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labor, curing complete as per specifications and as per directions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.4.2) Sqm 248.23 248.23 107.65 False None None False None False 26721.9595 0 2736883 86774 None code32 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labor, curing complete as per specifications and as per directions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.4.2) Head room Sqm 250.71 250.71 16.5 False None None False None False 4136.715 0 2736884 86774 None code33 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.2.2) Sqm 287.37 287.37 167.94 False None None False None False 48260.9178 0 2736885 86774 None code34 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.2.2) Head room Sqm 290.24 290.24 52.77 False None None False None False 15315.9648 0 2736886 86774 None code35 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labor, curing complete as per specifications and as per direct- tons of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.3.2) Sqm 342.99 342.99 179.76 False None None False None False 61655.8824 0 2736887 86774 None code36 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.3.2) Head Room Sqm 346.41 346.41 84.91 False None None False None False 29413.6731 0 2736888 86774 None code37 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub- bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. (SR-2023-24, Volume II, Chapter-09, Page No.63.0,Item No. 9.23) Sqm 1179.35 1179.35 75.16 False None None False None False 88639.946 0 2736889 86774 None code38 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR-2023-24, Volume II, Chapter-11, Page No.84,Item No. 11.26.1) Kgs 142.14 142.14 247.5 False None None False None False 35179.65 0 2736890 86774 None code39 Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). .Light shade pigment using white cement. (SR-2023-24, Volume II, Chapter-09, Page No.59.0,Item No. 9.6.2) Sqm 1307.07 1307.07 56.08 False None None False None False 73300.4856 0 2736891 86774 None code40 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- clouding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR-2023-24, Volume II, Chapter-08, Page No.45.0, Item No. 8.25) Sqm 141.11 141.11 275.59 False None None False None False 38888.5049 0 2736892 86774 None code41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labor complete as per specifications and as per directions of Engineer-in-charge. (SR-2023-24, Volume II, Chapter-08, Page No.45.0, Item No. 8.25) Head room Sqm 142.52 142.52 69.27 False None None False None False 9872.3604 0 2736893 86774 None code42 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labor complete as per specifications and as per directions of Engineer-in-charge. (SR-2023-24, Volume II, Chapter-08, Page No.47.0, Item No. 8.33.3) Sqm 143.17 143.17 31.1 False None None False None False 4452.587 0 2736894 86774 None code43 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR-2023-24, Volume II, Chapter-08, Page No.47.0, Item No. 8.33.3) Head Room Sqm 144.6 144.6 4.32 False None None False None False 624.672 0 2736895 86774 None code44 Polyurethane based Single Component for New Surface.Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa- terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (SR-2023-24, Volume-II, Chapter-15,Page No.149, Item No.15.1) Sqm 841.51 841.51 93.99 False None None False None False 79093.5249 0 2736896 86774 None code45 Polyurethane based Single Component for New Surface.Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa- terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (SR-2023-24, Volume-II, Chapter-15,Page No.149, Item No.15.1) Head room Sqm 849.92 849.92 16.5 False None None False None False 14023.68 0 2736897 86774 None code46 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes 100 mm diameter. Mtr 299.73 299.73 17.4 False None None False None False 5215.302 0 2736898 86774 None code47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes 100 mm diameter. Head room Rainwater pipe Mtr 302.72 302.72 6.5 False None None False None False 1967.68 0 2736899 86774 None code48 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (SR-2023-24, Volume II, Chapter-08, Page No.55.0,Item No. 8.84) Sqm 489.25 489.25 8.4 False None None False None False 4109.7 0 2736900 86774 None code49 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.(SR-2023-24, Volume II, Chapter-08, Page No.44.0, Item No. 8.16a) Sqm 1275.14 1275.14 22.22 False None None False None False 28333.6108 0 2736901 86774 None code50 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick (PWD SR 2022-23 Part-I Pg No. 1, Item No. 1.1.2 ) Mtr 80.0 80.0 130.0 False None None False None False 10400.0 0 2736902 86774 None code51 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch(PWD SR 2022-23 Part-I Pg No. 2, Item No. 2.1.1 ) No 276.0 276.0 11.0 False None None False None False 3036.0 0 2736903 86774 None code52 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch(PWD SR 2022-23 Part-I Pg No. 2, Item No. 2.1.1 )(b) Medium point above 3m upto 6m from tapping point to out let via switch No 386.0 386.0 3.0 False None None False None False 1158.0 0 2736904 86774 None code53 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6A 2 Way (PWD SR 2022-23 Part-I Pg No. 5, Item No. 3.1 ) No 121.0 121.0 14.0 False None None False None False 1694.0 0 2736905 86774 None code54 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 (PWD SR 2022-23 Part-I Pg No. 3, Item No. 2.3.3) No 40.0 40.0 280.0 False None None False None False 11200.0 0 2736906 86774 None code55 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket (PWD SR 2022-23 Part-I Pg No. 5, Item No. 3.6.3) No 162.0 162.0 16.0 False None None False None False 2592.0 0 2736907 86774 None code56 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP (PWD SR 2022-23 Part-I Pg No. 13, Item No.5.17.1) No 523.0 523.0 2.0 False None None False None False 1046.0 0 2736908 86774 None code57 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 56" Sweep (1400 mm) Regular model (PWD SR 2022-23 Part-I Pg No. 22 Item No.6.3.2) No 2170.0 2170.0 4.0 False None None False None False 8680.0 0 2736909 86774 None code58 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting W (PWD CSR 2022-23, I.No.11.3.1) No 496.0 496.0 8.0 False None None False None False 3968.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1708508930000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1708508930000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1708508930000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1708508930000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1708508930000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1708508930000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1708508930000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1708508930000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1708508930000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1708508930000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1708508930000 0 None None ELIGIBILITY Banker Details for reference None 1708508930000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1708508930000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1708508930000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1708508930000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None 1708508962000 0 None None ELIGIBILITY Before tendering for the works the tenderer may inspect the site personally or Site investigation report The tenderer before applying this tender has to visit the site along with Junior Engineer /Assistant Engineer/ Assistant Executive Engineer of PRE sub-Division. None 1708508969000 0 None None ELIGIBILITY G.S.T. Registration from Competent authority is compulsory None 1708508976000 0 None None ELIGIBILITY Addendum/Corrigendum will be published in the website/newspaper for all modifications/ corrections, if any. None 1708508983000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund. The tenderer shall abide by the directions of Government towards recovery as modified by the Government from time to time. None 1708508990000 0 None None ELIGIBILITY Necessary documents as per notification and bid documents None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText The P.R.E.D. or PWD Contractor Civil Registration Certificate Government True Technical Bid Annual Turnover Certificate Certified from Charted Accountant with UDIN Number in all classes of Civil Engineering works only for last Five Financial years ie 2018-19, 2019-20,2020-21,2021-22 and 2022-23 Certified from Charted Accountant Profit and Loss, balance sheet shall be enclosed True Technical Bid Work done Certificate For General Category Contractors KW-1 of this notification Construction Building Works of this notification value not less than 50percentage of the amount put to tender in any one of the last five financial year period 2018-19, 2019-20,2020-21,2021-22 and 2022-23 True Technical Bid As per PWD Code 251. Jurisdiction Contractors registered under class I and II may ender for works anywhere in the state. Contractors registered under class III may tender for works within the districts of the Public works Department circles where in they are registered. Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered. These registrations are valid for all. True Technical Bid Tender Capacity as per KW1 Eligible Tenderers will be qualified only if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under for General Assessed available tender capacity equal to bid formula True Technical Bid For Other Necessary Document as per Tender Bid Document KW2 and Notification True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None