| 1708584313000 | 1 | None | None | Other Works | Development of Park in Shorapur Town | 7449894.82 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2749721 | 87580 | None | Code01 | Earth work in surface excavation by mechanical means for lowering &
leveling the ground for all works other than foundation in all kinds of
soils & upto depth not exceeding 300mm as per drawing and technical
specifications, including setting out, shoring, strutting, barricading,
caution lights, removal of stumps and other deleterious matter including
dressing of excavated surfaces, disposing off or levelling the excavated
earth or sorting & stacking the selected earth for reuse in a radius
of 50 m and lift upto 1.5 m including cost of labour, tools, usage of
machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth PWD SR 2021-22 V -1 Item No. 1.12 Page No. 08 | Cum | 99.75 | 99.75 | 79.95 | False | None | None | False | None | False | 7975.0125 | 0 | | 2749722 | 87580 | None | Code02 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.15 I.No:2.1.3 | Cum | 6288.45 | 6288.45 | 12.3 | False | None | None | False | None | False | 77347.935 | 0 | | 2749723 | 87580 | None | Code03 | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)600 x 300 x 150 mm Kerb Stone PWD SR 2021-22 V -3 Item No.6.3 Page No. 146 | Mtr | 486.15 | 486.15 | 205.0 | False | None | None | False | None | False | 99660.75 | 0 | | 2749724 | 87580 | None | Code04 | Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications. PWD SR 2021-22 V -2 Item No. 9.32 Page No. 64 | Mtr | 1202.25 | 1202.25 | 410.0 | False | None | None | False | None | False | 492922.5 | 0 | | 2749725 | 87580 | None | Code05 | Earth work in surface excavation by mechanical means for lowering &
leveling the ground for all works other than foundation in all kinds of
soils & upto depth not exceeding 300mm as per drawing and technical
specifications, including setting out, shoring, strutting, barricading,
caution lights, removal of stumps and other deleterious matter including
dressing of excavated surfaces, disposing off or levelling the excavated
earth or sorting & stacking the selected earth for reuse in a radius
of 50 m and lift upto 1.5 m including cost of labour, tools, usage of
machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth PWD SR 2021-22 V -1 Item No. 1.12 Page No. 08 | Cum | 99.75 | 99.75 | 38.4726 | False | None | None | False | None | False | 3837.64185 | 0 | | 2749726 | 87580 | None | Code06 | Earth work excavation for Foundation by mechanical means for all
works & depth upto 3 m, as per drawing and technical specifications,
including setting out, shoring, strutting, barricading, caution lights,
including dressing of excavated surfaces, disposing off or levelling the
excavated earth or sorting & stacking the selected earth for reuse in a
radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage
of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth PWD SR 2021-22 V -1 Item No. 1.15.1 Page No. 08 | Cum | 313.95 | 313.95 | 111.537 | False | None | None | False | None | False | 35017.04115 | 0 | | 2749727 | 87580 | None | Code07 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD SR 2021-22 V -1 Item No. 1.9 Page No. 07 | Cum | 279.3 | 279.3 | 55.7685 | False | None | None | False | None | False | 15576.14205 | 0 | | 2749728 | 87580 | None | Code08 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.15 I.No:2.1.3 | Cum | 6288.45 | 6288.45 | 12.8242 | False | None | None | False | None | False | 80644.34049 | 0 | | 2749729 | 87580 | None | Code09 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.17 I.No: 2.4.2 | Cum | 6639.15 | 6639.15 | 50.4924 | False | None | None | False | None | False | 335226.61746 | 0 | | 2749730 | 87580 | None | Code10 | Add 5 % extra on formwork for staging & base preparationas per PWD- SR Note = | Cum | 316.15 | 316.15 | 50.4924 | False | None | None | False | None | False | 15963.17226 | 0 | | 2749731 | 87580 | None | Code11 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. PWD SR 2021-22 Vol:III P.NO.71 I.No:9.3 | Tonne | 82961.55 | 82961.55 | 2.53 | False | None | None | False | None | False | 209892.7215 | 0 | | 2749732 | 87580 | None | Code12 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. PWD SR 2021-22 Vol:1I P.NO.17 I.No:6.32 | Sqm | 1375.5 | 1375.5 | 207.405 | False | None | None | False | None | False | 285285.5775 | 0 | | 2749733 | 87580 | None | Code13 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. PWD SR 2021-22 Vol:1I P.NO.41 I.No:8.3.2 | Sqm | 349.65 | 349.65 | 480.0 | False | None | None | False | None | False | 167832.0 | 0 | | 2749734 | 87580 | None | Code14 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.17 I.No:2.4.1 | Cum | 6724.2 | 6724.2 | 3.0 | False | None | None | False | None | False | 20172.6 | 0 | | 2749735 | 87580 | None | Code15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2021-22 Vol:1I P.NO.45 I.No:8.25 | Sqm | 143.85 | 143.85 | 480.0 | False | None | None | False | None | False | 69048.0 | 0 | | 2749736 | 87580 | None | Code16 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery com plete as per specifications and as per directions of the Engineer-in-Charge.. PWD SR 2021-22 Vol:1I P.NO.82 I.No:11.25.2 | Kg | 142.8 | 142.8 | 945.0 | False | None | None | False | None | False | 134946.0 | 0 | | 2749737 | 87580 | None | Code17 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2021-22 Vol:1I P.NO.47 I.No:8.33.3 | Sqm | 145.95 | 145.95 | 45.0 | False | None | None | False | None | False | 6567.75 | 0 | | 2749738 | 87580 | None | Code18 | Item Description : Garden steel bench 2.1X0.75X0.6 (Approval : 21188/DMA/50DEVT/2017-18dt 11.07.2017 | No | 11760.0 | 11760.0 | 15.0 | False | None | None | False | None | False | 176400.0 | 0 | | 2749739 | 87580 | None | Code19 | Supply & fixing of HD Health Walker:. All Tubular. steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using AKZO Nobel - Great Wall Powder to the thickness of 80 - 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NaCL solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. Footplates made of alloys ,of Nylon having good thermal stability. Internal Nos Limited means no bump stops or crush points. Bearings: Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance Maintain according to EN16630 and the maintenance guide. Safety : All products must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN16630 certificates must be in the name of tendering party and not any third party. All oroducts must clearly display the GS mark as issued in the EN16630 safety certificates. Size (L*W * H) 1070 MM x 615 MM x 1360 MM . Capacity 1 person - (Koochie Make/ Equivalent) ISI /ISO Certified. As per Deputy commissioner(CCK) Approved copy Dated 14-11-2020 | No | 99750.0 | 99750.0 | 1.0 | False | None | None | False | None | False | 99750.0 | 0 | | 2749740 | 87580 | None | Code20 | Supply and fixing of Seated Chest Press. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified intemaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN 16630 Cetificates must be in the name of tendering party and not any 3rd Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. All poducts must carry a GS mark on it. Size L x W x H: 1955 x 733 x 2058mm, Weight: 86.6 KG, Safety Area: 5545 x 4470mm, Capacity 2 Person As per Deputy commissioner(CCK) Approved copy Dated 14-11-2020 | No | 183750.0 | 183750.0 | 1.0 | False | None | None | False | None | False | 183750.0 | 0 | | 2749741 | 87580 | None | Code21 | Supply & fixing of HD Waist Twister : All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using AKZO Nobel - Great WalO Powder to the thickness of 80 - 120 microns. All metal parts are to be tested in salt spray machine that uses a 5% NaCL solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. Footplates made of alloys of Nylon having good thermal stability. Internal Limited means no bump stops or crush points. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Mruntenance : Maintain according to EN16630 and the maintenance guide. Safety : All products must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN16630 certificates must be in the name of tendering party and not any third party. All products must clearly display the GS mark as issued in the EN16630 safety certificates. Size (L*W * H) 1460 MM x 1310 MM x 1150 MM . Capacity 3 persons - (Koochie Make/ Equivalent) ISI/ISO Certified. As per Deputy commissioner(CCK) Approved copy Dated 14-11-2020 | No | 115500.0 | 115500.0 | 1.0 | False | None | None | False | None | False | 115500.0 | 0 | | 2749742 | 87580 | None | Code22 | Supply and fixing of Bicycle Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCl solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. Size L x W x H 1000 x 498 x 1290mm, Weight: 51.5-KG, Safety Area: 3400 x 3498 mm, Capacity 1 Person As per Deputy commissioner(CCK) Approved copy Dated 14-11-2020 | No | 115500.0 | 115500.0 | 2.0 | False | None | None | False | None | False | 231000.0 | 0 | | 2749743 | 87580 | None | Code23 | Earth work in surface excavation by mechanical means for lowering &
leveling the ground for all works other than foundation in all kinds of
soils & upto depth not exceeding 300mm as per drawing and technical
specifications, including setting out, shoring, strutting, barricading,
caution lights, removal of stumps and other deleterious matter including
dressing of excavated surfaces, disposing off or levelling the excavated
earth or sorting & stacking the selected earth for reuse in a radius
of 50 m and lift upto 1.5 m including cost of labour, tools, usage of
machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth PWD SR 2021-22 V -1 Item No. 1.12 Page No. 08 | Cum | 99.75 | 99.75 | 138.2012 | False | None | None | False | None | False | 13785.5697 | 0 | | 2749744 | 87580 | None | Code24 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.15 I.No:2.1.3 | Cum | 6288.45 | 6288.45 | 21.1242 | False | None | None | False | None | False | 132838.47549 | 0 | | 2749745 | 87580 | None | Code25 | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)600 x 300 x 150 mm Kerb Stone PWD SR 2021-22 V -3 Item No.6.3 Page No. 146 | Mtr | 486.15 | 486.15 | 316.0424 | False | None | None | False | None | False | 153644.01276 | 0 | | 2749746 | 87580 | None | Code26 | Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications. PWD SR 2021-22 V -2 Item No. 9.32 Page No. 64 | Sqm | 1202.25 | 1202.25 | 834.6381 | False | None | None | False | None | False | 1003443.655725 | 0 | | 2749747 | 87580 | None | Code27 | Item Description : Garden steel bench 2.1X0.75X0.6 (Approval : 21188/DMA/50DEVT/2017-18dt 11.07.2017 | No | 11760.0 | 11760.0 | 8.0 | False | None | None | False | None | False | 94080.0 | 0 | | 2749748 | 87580 | None | Code28 | Item Description :Rainbow climmber LK-CL-81 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge, 2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-12 Ft Width-2 Ft Height-5 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 8190.0 | 8190.0 | 1.0 | False | None | None | False | None | False | 8190.0 | 0 | | 2749749 | 87580 | None | Code29 | Item Description :See saw double-LK-SS-63 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-8 Ft Width-5 Ft Height-2 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 25830.0 | 25830.0 | 1.0 | False | None | None | False | None | False | 25830.0 | 0 | | 2749750 | 87580 | None | Code30 | Item Description :Arch Swing two seater LK-SW-51 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-10 Ft Width-5 Ft Height-9 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 25935.0 | 25935.0 | 1.0 | False | None | None | False | None | False | 25935.0 | 0 | | 2749751 | 87580 | None | Code31 | Item Description : Two Way Slide All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-15 Ft Width-20Ft Height-9 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 117600.0 | 117600.0 | 1.0 | False | None | None | False | None | False | 117600.0 | 0 | | 2749752 | 87580 | None | Code32 | Item Description : Standing Mary go ground All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min)Dia-4 Ft Height-4 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 62790.0 | 62790.0 | 1.0 | False | None | None | False | None | False | 62790.0 | 0 | | 2749753 | 87580 | None | Code33 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical
specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated
earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth PWD SR 2021-22 V -1 Item No. 1.12 Page No. 08 | Cum | 99.75 | 99.75 | 24.7227 | False | None | None | False | None | False | 2466.089325 | 0 | | 2749754 | 87580 | None | Code34 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,
including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage
of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth PWD SR 2021-22 V -1 Item No. 1.15.1 Page No. 08 | Cum | 313.95 | 313.95 | 74.3309 | False | None | None | False | None | False | 23336.186055 | 0 | | 2749755 | 87580 | None | Code35 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD SR 2021-22 V -1 Item No. 1.9 Page No. 07 | Cum | 279.3 | 279.3 | 37.1654 | False | None | None | False | None | False | 10380.29622 | 0 | | 2749756 | 87580 | None | Code36 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.15 I.No:2.1.3 | Cum | 6288.45 | 6288.45 | 8.4689 | False | None | None | False | None | False | 53256.254205 | 0 | | 2749757 | 87580 | None | Code37 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.17 I.No: 2.4.2 | Cum | 6639.15 | 6639.15 | 34.2267 | False | None | None | False | None | False | 227236.195305 | 0 | | 2749758 | 87580 | None | Code38 | Add 5 % extra on formwork for staging & base preparationas per PWD- SR Note = | Cum | 316.15 | 316.15 | 34.2267 | False | None | None | False | None | False | 10820.771205 | 0 | | 2749759 | 87580 | None | Code39 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. PWD SR 2021-22 Vol:III P.NO.71 I.No:9.3 | Tonne | 82961.55 | 82961.55 | 1.5299 | False | None | None | False | None | False | 126922.875345 | 0 | | 2749760 | 87580 | None | Code40 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. PWD SR 2021-22 Vol:1I P.NO.17 I.No:6.32 | Sqm | 1375.5 | 1375.5 | 124.305 | False | None | None | False | None | False | 170981.5275 | 0 | | 2749761 | 87580 | None | Code41 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. PWD SR 2021-22 Vol:1I P.NO.41 I.No:8.3.2 | Sqm | 349.65 | 349.65 | 288.0 | False | None | None | False | None | False | 100699.2 | 0 | | 2749762 | 87580 | None | Code42 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.17 I.No:2.4.1 | Cum | 6724.2 | 6724.2 | 1.8 | False | None | None | False | None | False | 12103.56 | 0 | | 2749763 | 87580 | None | Code43 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2021-22 Vol:1I P.NO.45 I.No:8.25 | Sqm | 143.85 | 143.85 | 288.0 | False | None | None | False | None | False | 41428.8 | 0 | | 2749764 | 87580 | None | Code44 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. PWD SR 2021-22 Vol:1I P.NO.82 I.No:11.25.2 | Sqm | 142.8 | 142.8 | 1483.6499 | False | None | None | False | None | False | 211865.20572 | 0 | | 2749765 | 87580 | None | Code45 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2021-22 Vol:1I P.NO.47 I.No:8.33.3 | Sqm | 145.95 | 145.95 | 46.65 | False | None | None | False | None | False | 6808.5675 | 0 | | 2749766 | 87580 | None | Code46 | Item Description : Garden steel bench 2.1X0.75X0.6 (Approval : 21188/DMA/50DEVT/2017-18dt 11.07.2017 | No | 11760.0 | 11760.0 | 10.0 | False | None | None | False | None | False | 117600.0 | 0 | | 2749767 | 87580 | None | Code47 | Item Description :Rainbow climmber LK-CL-81 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge, 2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-12 Ft Width-2 Ft Height-5 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 8190.0 | 8190.0 | 1.0 | False | None | None | False | None | False | 8190.0 | 0 | | 2749768 | 87580 | None | Code48 | Item Description :See saw double-LK-SS-63 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-8 Ft Width-5 Ft Height-2 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 25830.0 | 25830.0 | 1.0 | False | None | None | False | None | False | 25830.0 | 0 | | 2749769 | 87580 | None | Code49 | Item Description :Arch Swing two seater LK-SW-51 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-10 Ft Width-5 Ft Height-9 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 25935.0 | 25935.0 | 1.0 | False | None | None | False | None | False | 25935.0 | 0 | | 2749770 | 87580 | None | Code50 | Item Description : Two Way Slide All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-15 Ft Width-20Ft Height-9 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 117600.0 | 117600.0 | 1.0 | False | None | None | False | None | False | 117600.0 | 0 | | 2749771 | 87580 | None | Code51 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth PWD SR 2021-22 V -1 Item No. 1.12 Page No. 08 | Cum | 99.75 | 99.75 | 35.3777 | False | None | None | False | None | False | 3528.925575 | 0 | | 2749772 | 87580 | None | Code52 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth PWD SR 2021-22 V -1 Item No. 1.15.1 Page No. 08 | Cum | 313.95 | 313.95 | 104.949 | False | None | None | False | None | False | 32948.73855 | 0 | | 2749773 | 87580 | None | Code53 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD SR 2021-22 V -1 Item No. 1.9 Page No. 07 | Cum | 279.3 | 279.3 | 52.4745 | False | None | None | False | None | False | 14656.12785 | 0 | | 2749774 | 87580 | None | Code54 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.15 I.No:2.1.3 | Cum | 6288.45 | 6288.45 | 12.0205 | False | None | None | False | None | False | 75590.313225 | 0 | | 2749775 | 87580 | None | Code55 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.17 I.No: 2.4.2 | Cum | 6639.15 | 6639.15 | 48.1593 | False | None | None | False | None | False | 319736.816595 | 0 | | 2749776 | 87580 | None | Code56 | Add 5 % extra on formwork for staging & base preparationas per PWD- SR Note | Cum | 316.15 | 316.15 | 48.1593 | False | None | None | False | None | False | 15225.562695 | 0 | | 2749777 | 87580 | None | Code57 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. PWD SR 2021-22 Vol:III P.NO.71 I.No:9.3 | Tonne | 82961.55 | 82961.55 | 2.2199 | False | None | None | False | None | False | 184166.344845 | 0 | | 2749778 | 87580 | None | Code58 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. PWD SR 2021-22 Vol:1I P.NO.17 I.No:6.32 | Sqm | 1375.5 | 1375.5 | 182.475 | False | None | None | False | None | False | 250994.3625 | 0 | | 2749779 | 87580 | None | Code59 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. PWD SR 2021-22 Vol:1I P.NO.41 I.No:8.3.2 | Sqm | 349.65 | 349.65 | 422.4 | False | None | None | False | None | False | 147692.16 | 0 | | 2749780 | 87580 | None | Code60 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2021-22 Vol:1 P.NO.17 I.No:2.4.1 | Cum | 6724.2 | 6724.2 | 2.64 | False | None | None | False | None | False | 17751.888 | 0 | | 2749781 | 87580 | None | Code61 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2021-22 Vol:1I P.NO.45 I.No:8.25 | Sqm | 143.85 | 143.85 | 422.4 | False | None | None | False | None | False | 60762.24 | 0 | | 2749782 | 87580 | None | Code62 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. PWD SR 2021-22 Vol:1I P.NO.82 I.No:11.25.2 | Kg | 142.8 | 142.8 | 1335.6 | False | None | None | False | None | False | 190723.68 | 0 | | 2749783 | 87580 | None | Code63 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. PWD SR 2021-22 Vol:1I P.NO.47 I.No:8.33.3 | Sqm | 145.95 | 145.95 | 39.6 | False | None | None | False | None | False | 5779.62 | 0 | | 2749784 | 87580 | None | Code64 | Item Description : Garden steel bench 2.1X0.75X0.6 (Approval : 21188/DMA/50DEVT/2017-18dt 11.07.2017 | No | 11760.0 | 11760.0 | 8.0 | False | None | None | False | None | False | 94080.0 | 0 | | 2749785 | 87580 | None | Code65 | Item Description :Rainbow climmber LK-CL-81 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge, 2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-12 Ft Width-2 Ft Height-5 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 8190.0 | 8190.0 | 1.0 | False | None | None | False | None | False | 8190.0 | 0 | | 2749786 | 87580 | None | Code66 | Item Description :See saw double-LK-SS-63 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-8 Ft Width-5 Ft Height-2 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 25830.0 | 25830.0 | 1.0 | False | None | None | False | None | False | 25830.0 | 0 | | 2749787 | 87580 | None | Code67 | Item Description :Arch Swing two seater LK-SW-51 All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-10 Ft Width-5 Ft Height-9 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 25935.0 | 25935.0 | 1.0 | False | None | None | False | None | False | 25935.0 | 0 | | 2749788 | 87580 | None | Code68 | Item Description : Two Way Slide All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min) Length-15 Ft Width-20Ft Height-9 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 117600.0 | 117600.0 | 1.0 | False | None | None | False | None | False | 117600.0 | 0 | | 2749789 | 87580 | None | Code69 | Item Description : Standing Mary go ground All round and rectangular pipes are GI or CR, ISI make Gauge 14 Gauge,2 Coating are red oxide and final oaints of industrial paint, nut blt GI Bearing heavy , (branded) FRP thickness4-5mm Swing assembly 6mm chain with rubber coating (Approval :21188/DMA/50/DEVT/2017-18 dt 11.07.2017 Size.(Min)Dia-4 Ft Height-4 Ft As per Deputy commissioner(CCK) Approved copy Dated 24-11-2022 | No | 62790.0 | 62790.0 | 1.0 | False | None | None | False | None | False | 62790.0 | 0 |
|