| 1708608405000 | 1 | None | None | Buildings | Construction of lift room and Installation of lift to C- Block building of Shivamogga- Bhadravathi urban development authority Shivamogga. | 4214432.96 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2767351 | 88219 | None | 001 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m. and complete as directed by Engineer-in-charge ---- GST | Cum | 76.65 | 76.65 | 29.3 | False | None | None | False | None | False | 2245.845 | 0 | | 2767352 | 88219 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. and complete as directed by Engineer-in-charge ---- GST | Cum | 5720.4 | 5720.4 | 2.06 | False | None | None | False | None | False | 11784.024 | 0 | | 2767353 | 88219 | None | 003 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. as directed by Engineer-in-charge ---- GST | Sqm | 99.75 | 99.75 | 200.0 | False | None | None | False | None | False | 19950.0 | 0 | | 2767354 | 88219 | None | 004 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)and as per the directions of engineer-in-charge of work ---- GST | Cum | 5580.75 | 5580.75 | 7.68 | False | None | None | False | None | False | 42860.16 | 0 | | 2767355 | 88219 | None | 005 | Providing Raised and cut pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. .and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 378.0 | 378.0 | 4.2 | False | None | None | False | None | False | 1587.6 | 0 | | 2767356 | 88219 | None | 006 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m and as per the directions of engineer-in-charge of work ---- GST | Cum | 214.2 | 214.2 | 20.51 | False | None | None | False | None | False | 4393.242 | 0 | | 2767357 | 88219 | None | 007 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates,.and as per the directions of engineer-in-charge of work. ---- GST | Cum | 6105.75 | 6105.75 | 6.39 | False | None | None | False | None | False | 39015.7425 | 0 | | 2767358 | 88219 | None | 008 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 305.29 | 305.29 | 29.99 | False | None | None | False | None | False | 9155.6471 | 0 | | 2767359 | 88219 | None | 009 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, . as per the directions of the Engineer -in-charge of the work. ---- GST | Cum | 6108.9 | 6108.9 | 0.91 | False | None | None | False | None | False | 5559.099 | 0 | | 2767360 | 88219 | None | 010 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work..PWD Common SR V-1, Page no 15, I No 2.2.2.1( 50% on plinth beams of buildings) ---- GST | Sqm | 3054.45 | 3054.45 | 9.07 | False | None | None | False | None | False | 27703.8615 | 0 | | 2767361 | 88219 | None | 011 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) (Additionalities: For form work 8 % including lead and lift cost of all materials as per technical specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. and as per the directions of engineer-in charge of work. ---- GST | Cum | 6323.1 | 6323.1 | 5.03 | False | None | None | False | None | False | 31805.193 | 0 | | 2767362 | 88219 | None | 012 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 4426.17 | 4426.17 | 22.89 | False | None | None | False | None | False | 101315.0313 | 0 | | 2767363 | 88219 | None | 013 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 3793.86 | 3793.86 | 17.54 | False | None | None | False | None | False | 66544.3044 | 0 | | 2767364 | 88219 | None | 014 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work. ---- GST | Sqm | 2845.4 | 2845.4 | 6.24 | False | None | None | False | None | False | 17755.296 | 0 | | 2767365 | 88219 | None | 015 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 3161.55 | 3161.55 | 8.88 | False | None | None | False | None | False | 28074.564 | 0 | | 2767366 | 88219 | None | 016 | Providing Thermo-Mechanically Treated bars of grade Fe-500e Steelreinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall notbe measured separately)and as per the directions of engineer-in charge of work.. ---- GST | Kgs | 94.5 | 94.5 | 1479.6 | False | None | None | False | None | False | 139822.2 | 0 | | 2767367 | 88219 | None | 017 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. and as per the directions of engineer-in charge of work. ---- GST | Sqm | 1251.6 | 1251.6 | 35.94 | False | None | None | False | None | False | 44982.504 | 0 | | 2767368 | 88219 | None | 018 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregatesand as per the directions of engineer-in charge of work ---- GST | Cum | 5903.1 | 5903.1 | 0.24 | False | None | None | False | None | False | 1416.744 | 0 | | 2767369 | 88219 | None | 019 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).and as per the directions of engineer-in-charge of work ---- GST | Sqm | 6134.1 | 6134.1 | 3.6 | False | None | None | False | None | False | 22082.76 | 0 | | 2767370 | 88219 | None | 020 | Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.. and as per the directions of engineer-in-charge of work. ---- GST | Kgs | 161.7 | 161.7 | 75.6 | False | None | None | False | None | False | 12224.52 | 0 | | 2767371 | 88219 | None | 021 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 282.45 | 282.45 | 10.83 | False | None | None | False | None | False | 3058.9335 | 0 | | 2767372 | 88219 | None | 022 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 333.9 | 333.9 | 44.45 | False | None | None | False | None | False | 14841.855 | 0 | | 2767373 | 88219 | None | 023 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 256.2 | 256.2 | 6.72 | False | None | None | False | None | False | 1721.664 | 0 | | 2767374 | 88219 | None | 024 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- GST | Sqm | 87.15 | 87.15 | 10.83 | False | None | None | False | None | False | 943.8345 | 0 | | 2767375 | 88219 | None | 025 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, CherryRed, Brown, Cat Eye, River Pink or equivalent. ) as per direction of Engineer-in-charge. ---- GST | Sqm | 3007.2 | 3007.2 | 16.8 | False | None | None | False | None | False | 50520.96 | 0 | | 2767376 | 88219 | None | 026 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.as directed by Engineer-in-charge ---- GST | Sqm | 1006.95 | 1006.95 | 6.72 | False | None | None | False | None | False | 6766.704 | 0 | | 2767377 | 88219 | None | 027 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. and as per directions of Engineer-in-charge ---- GST | Sqm | 1251.6 | 1251.6 | 50.0 | False | None | None | False | None | False | 62580.0 | 0 | | 2767378 | 88219 | None | 028 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 99.75 | 99.75 | 10.83 | False | None | None | False | None | False | 1080.2925 | 0 | | 2767379 | 88219 | None | 029 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 142.8 | 142.8 | 44.45 | False | None | None | False | None | False | 6347.46 | 0 | | 2767380 | 88219 | None | 030 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- GST | Sqm | 6891.15 | 6891.15 | 9.0 | False | None | None | False | None | False | 62020.35 | 0 | | 2767381 | 88219 | None | 031 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 136.5 | 136.5 | 12.6 | False | None | None | False | None | False | 1719.9 | 0 | | 2767382 | 88219 | None | 032 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of
the Engineer-in-Charge. ---- GST | Kgs | 525.0 | 525.0 | 37.7 | False | None | None | False | None | False | 19792.5 | 0 | | 2767383 | 88219 | None | 033 | CUBICLE WORKSTATIONS:- Providing and fixing of CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with fabric of approved colour and one writing board (600 mm w) and one soft board (600 mm w) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway-one middle raceway (600mm W) below table top per workstation and continuous raceway at the skirting level, Hardware-MS powder coated corner bkt (Bracket), cantilever bkt, separator hook on bkt, L bkt and Table joint plate., etc complete as per the direction of the Engineer in-charge of the work T TYPE 2 wings 3C) as per the direction of the Engineer-in-charge. ---- GST | Sqm | 15800.0 | 15800.0 | 27.52 | False | None | None | False | None | False | 434816.0 | 0 | | 2767384 | 88219 | None | 034 | Executive Table: Providing and placing main desk of size shall be 2400mm width X 1050 mm Depth X 743mm Height (Main Desk); Table top shall be of 18mm thick post formed plywood with 2mm edge banding,colour laminate. The understructure shall be in 18 mm thick laminated plywood panels of 3-Drawer storage units with different combinations to support tops made with 18mm plywood. Modesty and back panels are made with 18mm plywood panels. The pedestals/ storage shall be fitted with necessary locks, telescopic slides, handles. and as per directions of Engineer-in-charge. ---- GST | Nos | 27540.0 | 27540.0 | 1.0 | False | None | None | False | None | False | 27540.0 | 0 | | 2767385 | 88219 | None | 035 | Table Side Unit & Storages:- Manufacturing, providing & fixing of table side unit/storage with 18 mm thick plywood with lockable shutters duly post formed. The surfaces shall be finished with 1.00 mm thick approved decorative laminate on visible surfaces & balancing off laminate on internal surfaces. The edges shall be finished with 2.00 mm thick P.V.C edge binding tape & necessary hardware like handle, locks, hinges etc. and as per the directions of engineer-in-charge of work ---- GST | Sqm | 16600.0 | 16600.0 | 18.0 | False | None | None | False | None | False | 298800.0 | 0 | | 2767386 | 88219 | None | 036 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- GST | Kgs | 142.8 | 142.8 | 125.0 | False | None | None | False | None | False | 17850.0 | 0 | | 2767387 | 88219 | None | 037 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m². and as per directions of the Engineer-in-Charge. ---- GST | Sqm | 834.75 | 834.75 | 15.0 | False | None | None | False | None | False | 12521.25 | 0 | | 2767388 | 88219 | None | 038 | Making the opening in brick masonry for door/window/clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge..and cupboards as directed by Engineer-in-charge ---- GST | Sqm | 1192.0 | 1192.0 | 3.6 | False | None | None | False | None | False | 4291.2 | 0 | | 2767389 | 88219 | None | 039 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- GST | Cum | 1970.41 | 1970.41 | 3.0 | False | None | None | False | None | False | 5911.23 | 0 | | 2767390 | 88219 | None | 040 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) (Additionalities: For form work 8 % including lead and lift cost of all materials as per technical specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.as per the direction of Engineer-In-Charge. ---- GST | Cum | 6386.33 | 6386.33 | 4.66 | False | None | None | False | None | False | 29760.2978 | 0 | | 2767391 | 88219 | None | 041 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work.. ---- GST | Sqm | 4470.43 | 4470.43 | 15.12 | False | None | None | False | None | False | 67592.9016 | 0 | | 2767392 | 88219 | None | 042 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 3831.8 | 3831.8 | 18.47 | False | None | None | False | None | False | 70773.346 | 0 | | 2767393 | 88219 | None | 043 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work. ---- GST | Sqm | 2873.85 | 2873.85 | 6.24 | False | None | None | False | None | False | 17932.824 | 0 | | 2767394 | 88219 | None | 044 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 3193.17 | 3193.17 | 9.0 | False | None | None | False | None | False | 28738.53 | 0 | | 2767395 | 88219 | None | 045 | Providing Thermo-Mechanically Treated bars of grade Fe-500e Steelreinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall notbe measured separately) and as per directions of Engineer-in-charge. ---- GST | Kgs | 95.45 | 95.45 | 559.2 | False | None | None | False | None | False | 53375.64 | 0 | | 2767396 | 88219 | None | 046 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- GST | Sqm | 1264.12 | 1264.12 | 32.88 | False | None | None | False | None | False | 41564.2656 | 0 | | 2767397 | 88219 | None | 047 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates, and as per directions of Engineer-in-charge ---- GST | Cum | 5962.13 | 5962.13 | 0.24 | False | None | None | False | None | False | 1430.9112 | 0 | | 2767398 | 88219 | None | 048 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) and as per directions of the Engineer-in-Charge ---- GST | Sqm | 6195.44 | 6195.44 | 3.6 | False | None | None | False | None | False | 22303.584 | 0 | | 2767399 | 88219 | None | 049 | Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. ---- GST | Kgs | 163.32 | 163.32 | 75.6 | False | None | None | False | None | False | 12346.992 | 0 | | 2767400 | 88219 | None | 050 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 285.27 | 285.27 | 9.63 | False | None | None | False | None | False | 2747.1501 | 0 | | 2767401 | 88219 | None | 051 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 337.24 | 337.24 | 50.25 | False | None | None | False | None | False | 16946.31 | 0 | | 2767402 | 88219 | None | 052 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 258.76 | 258.76 | 6.72 | False | None | None | False | None | False | 1738.8672 | 0 | | 2767403 | 88219 | None | 053 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.and as per the directions of engineer-in-charge of work ---- GST | Sqm | 88.02 | 88.02 | 9.63 | False | None | None | False | None | False | 847.6326 | 0 | | 2767404 | 88219 | None | 054 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, CherryRed, Brown, Cat Eye, River Pink or equivalent. and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 3037.27 | 3037.27 | 16.8 | False | None | None | False | None | False | 51026.136 | 0 | | 2767405 | 88219 | None | 055 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.and as perthe directions of engineer-in-charge of work. ---- GST | Sqm | 1017.02 | 1017.02 | 6.72 | False | None | None | False | None | False | 6834.3744 | 0 | | 2767406 | 88219 | None | 056 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 100.75 | 100.75 | 9.63 | False | None | None | False | None | False | 970.2225 | 0 | | 2767407 | 88219 | None | 057 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 144.23 | 144.23 | 50.25 | False | None | None | False | None | False | 7247.5575 | 0 | | 2767408 | 88219 | None | 058 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- GST | Sqm | 6960.06 | 6960.06 | 9.0 | False | None | None | False | None | False | 62640.54 | 0 | | 2767409 | 88219 | None | 059 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 137.87 | 137.87 | 12.6 | False | None | None | False | None | False | 1737.162 | 0 | | 2767410 | 88219 | None | 060 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- GST | Kgs | 525.0 | 525.0 | 37.7 | False | None | None | False | None | False | 19792.5 | 0 | | 2767411 | 88219 | None | 061 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge and as per the directions of engineer-in charge of work. ---- GST | Kgs | 142.8 | 142.8 | 80.0 | False | None | None | False | None | False | 11424.0 | 0 | | 2767412 | 88219 | None | 062 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m². .and as per the directions of engineer-in-charge of work ---- GST | Sqm | 834.75 | 834.75 | 6.0 | False | None | None | False | None | False | 5008.5 | 0 | | 2767413 | 88219 | None | 063 | Making the opening in brick masonry for door/window/clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge..and cupboards as directed by Engineer-in-charge ---- GST | Sqm | 1192.0 | 1192.0 | 3.6 | False | None | None | False | None | False | 4291.2 | 0 | | 2767414 | 88219 | None | 064 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- GST | Cum | 1970.41 | 1970.41 | 3.0 | False | None | None | False | None | False | 5911.23 | 0 | | 2767415 | 88219 | None | 065 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) (Additionalities: For form work 8 % including lead and lift cost of all materials as per technical specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.as per the direction of Engineer-In-Charge. ---- GST | Cum | 6449.56 | 6449.56 | 5.83 | False | None | None | False | None | False | 37600.9348 | 0 | | 2767416 | 88219 | None | 066 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work.. ---- GST | Sqm | 4514.69 | 4514.69 | 22.05 | False | None | None | False | None | False | 99548.9145 | 0 | | 2767417 | 88219 | None | 067 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 3869.74 | 3869.74 | 18.47 | False | None | None | False | None | False | 71474.0978 | 0 | | 2767418 | 88219 | None | 068 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work. ---- GST | Sqm | 2902.3 | 2902.3 | 6.24 | False | None | None | False | None | False | 18110.352 | 0 | | 2767419 | 88219 | None | 069 | Additionalities for Formwork, Centering & Scaffolding Percentage on finished rate of concrete per m3,including cost of all materials, with all lead and lifts, loading and un-loading charges, cost oflabour, HOM charges of all machineries, incidental and equipment charges, and implementationof Environmental and Social Safeguards etc., complete and as per the directions of engineer-in charge of work ---- GST | Sqm | 3224.78 | 3224.78 | 13.5 | False | None | None | False | None | False | 43534.53 | 0 | | 2767420 | 88219 | None | 070 | Providing Thermo-Mechanically Treated bars of grade Fe-500e Steelreinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall notbe measured separately) and as per directions of Engineer-in-charge. ---- GST | Kgs | 96.39 | 96.39 | 699.6 | False | None | None | False | None | False | 67434.444 | 0 | | 2767421 | 88219 | None | 071 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- GST | Sqm | 1276.63 | 1276.63 | 42.56 | False | None | None | False | None | False | 54333.3728 | 0 | | 2767422 | 88219 | None | 072 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates, and as per directions of Engineer-in-charge ---- GST | Cum | 6021.16 | 6021.16 | 0.32 | False | None | None | False | None | False | 1926.7712 | 0 | | 2767423 | 88219 | None | 073 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) and as per directions of the Engineer-in-Charge ---- GST | Sqm | 6256.78 | 6256.78 | 3.6 | False | None | None | False | None | False | 22524.408 | 0 | | 2767424 | 88219 | None | 074 | Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. ---- GST | Kgs | 164.93 | 164.93 | 75.6 | False | None | None | False | None | False | 12468.708 | 0 | | 2767425 | 88219 | None | 075 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 288.1 | 288.1 | 9.63 | False | None | None | False | None | False | 2774.403 | 0 | | 2767426 | 88219 | None | 076 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 340.58 | 340.58 | 50.25 | False | None | None | False | None | False | 17114.145 | 0 | | 2767427 | 88219 | None | 077 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 261.32 | 261.32 | 6.72 | False | None | None | False | None | False | 1756.0704 | 0 | | 2767428 | 88219 | None | 078 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.and as per the directions of engineer-in-charge of work ---- GST | Sqm | 88.89 | 88.89 | 9.63 | False | None | None | False | None | False | 856.0107 | 0 | | 2767429 | 88219 | None | 079 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, CherryRed, Brown, Cat Eye, River Pink or equivalent. and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 3067.34 | 3067.34 | 16.8 | False | None | None | False | None | False | 51531.312 | 0 | | 2767430 | 88219 | None | 080 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.and as perthe directions of engineer-in-charge of work. ---- GST | Sqm | 1027.09 | 1027.09 | 6.72 | False | None | None | False | None | False | 6902.0448 | 0 | | 2767431 | 88219 | None | 081 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. and as per the directions of engineer-in-charge of work. ---- GST | Sqm | 101.75 | 101.75 | 9.63 | False | None | None | False | None | False | 979.8525 | 0 | | 2767432 | 88219 | None | 082 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 145.66 | 145.66 | 50.25 | False | None | None | False | None | False | 7319.415 | 0 | | 2767433 | 88219 | None | 083 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- GST | Sqm | 7028.97 | 7028.97 | 9.0 | False | None | None | False | None | False | 63260.73 | 0 | | 2767434 | 88219 | None | 084 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- GST | Sqm | 139.23 | 139.23 | 12.6 | False | None | None | False | None | False | 1754.298 | 0 | | 2767435 | 88219 | None | 085 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- GST | Kgs | 525.0 | 525.0 | 37.7 | False | None | None | False | None | False | 19792.5 | 0 | | 2767436 | 88219 | None | 086 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge and as per the directions of engineer-in charge of work. ---- GST | Kgs | 142.8 | 142.8 | 80.0 | False | None | None | False | None | False | 11424.0 | 0 | | 2767437 | 88219 | None | 087 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m². .and as per the directions of engineer-in-charge of work ---- GST | Sqm | 834.75 | 834.75 | 6.0 | False | None | None | False | None | False | 5008.5 | 0 | | 2767438 | 88219 | None | 088 | Design, supplying, erecting testing and commissioning of - passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or
without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional / international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc., D With Out Machine Room-SS Finish , 8 Passengers. 3 stops. and as per the directions of engineer-in-charge of work. ---- GST | Job | 1312850.0 | 1312850.0 | 1.0 | False | None | None | False | None | False | 1312850.0 | 0 | | 2767439 | 88219 | None | 089 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick. and as per directions of Engineer-in-charge. ---- GST | Mtr | 70.0 | 70.0 | 15.0 | False | None | None | False | None | False | 1050.0 | 0 | | 2767440 | 88219 | None | 090 | Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box. as per the direction of the Engineer-in-charge. ---- GST | Each | 51.0 | 51.0 | 8.0 | False | None | None | False | None | False | 408.0 | 0 | | 2767441 | 88219 | None | 091 | Supplying PVC/ GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy guage saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 20mm. and as per the directions of engineer-in charge of work. ---- GST | Mtr | 25.0 | 25.0 | 10.0 | False | None | None | False | None | False | 250.0 | 0 | | 2767442 | 88219 | None | 092 | Wiring for lighting/ power circuit using one of FRLS pvc insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. 1.5 Sqmm as per direction of Engineer-in-charge. ---- GST | Mtr | 26.0 | 26.0 | 50.0 | False | None | None | False | None | False | 1300.0 | 0 | | 2767443 | 88219 | None | 093 | Wiring for lighting/ power circuit using one of FRLS pvc insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. 2.5 Sqmm. as per specification and as per directions of Engineer-in-charge. ---- GST | Mtr | 40.0 | 40.0 | 70.0 | False | None | None | False | None | False | 2800.0 | 0 | | 2767444 | 88219 | None | 094 | Wiring for lighting/ power circuit using one of FRLS pvc insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. 4 Sqmm. as per specification and as per directions of Engineer-in-charge. ---- GST | Mtr | 59.0 | 59.0 | 350.0 | False | None | None | False | None | False | 20650.0 | 0 | | 2767445 | 88219 | None | 095 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way ---- GST | Each | 122.0 | 122.0 | 13.0 | False | None | None | False | None | False | 1586.0 | 0 | | 2767446 | 88219 | None | 096 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supperting, back plate with required nos. of machine screws, bolts nuts etc. complete on the existing metal/PVC box. 4 module. as directed by Engineer-in-charge ---- GST | Each | 175.0 | 175.0 | 13.0 | False | None | None | False | None | False | 2275.0 | 0 | | 2767447 | 88219 | None | 097 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps SP switch. as directed by Engineer-in-charge ---- GST | Nos | 88.0 | 88.0 | 16.0 | False | None | None | False | None | False | 1408.0 | 0 | | 2767448 | 88219 | None | 098 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way 5pin socket and as per directions of Engineer-in-charge. ---- GST | Nos | 162.0 | 162.0 | 3.0 | False | None | None | False | None | False | 486.0 | 0 | | 2767449 | 88219 | None | 099 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. and as per directions of Engineer-in-charge. ---- GST | Nos | 313.0 | 313.0 | 3.0 | False | None | None | False | None | False | 939.0 | 0 | | 2767450 | 88219 | None | 100 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP ---- GST | Nos | 523.0 | 523.0 | 3.0 | False | None | None | False | None | False | 1569.0 | 0 | | 2767451 | 88219 | None | 101 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN ---- GST | Nos | 1777.0 | 1777.0 | 1.0 | False | None | None | False | None | False | 1777.0 | 0 | | 2767452 | 88219 | None | 102 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 Way SP & N. and as per directions of Engineer-in-charge. ---- GST | Nos | 1591.0 | 1591.0 | 1.0 | False | None | None | False | None | False | 1591.0 | 0 | | 2767453 | 88219 | None | 103 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 4 pole. as per direction of Engineer-in-charge. ---- GST | Nos | 4677.0 | 4677.0 | 1.0 | False | None | None | False | None | False | 4677.0 | 0 | | 2767454 | 88219 | None | 104 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 48" Sweep 5 Star (1200 mm). and as per directions of Engineer-in-charge. ---- GST | Nos | 2949.0 | 2949.0 | 3.0 | False | None | None | False | None | False | 8847.0 | 0 | | 2767455 | 88219 | None | 105 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W. ---- GST | Nos | 1197.0 | 1197.0 | 4.0 | False | None | None | False | None | False | 4788.0 | 0 | | 2767456 | 88219 | None | 106 | Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18W-20W (T8). ---- GST | Nos | 622.0 | 622.0 | 3.0 | False | None | None | False | None | False | 1866.0 | 0 | | 2767457 | 88219 | None | 107 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 48" Sweep 5 Star (1200 mm). and as per directions of Engineer-in-charge. ---- GST | Nos | 2949.0 | 2949.0 | 3.0 | False | None | None | False | None | False | 8847.0 | 0 | | 2767458 | 88219 | None | 108 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W. ---- GST | Nos | 1197.0 | 1197.0 | 4.0 | False | None | None | False | None | False | 4788.0 | 0 | | 2767459 | 88219 | None | 109 | Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18W-20W (T8). ---- GST | Nos | 622.0 | 622.0 | 3.0 | False | None | None | False | None | False | 1866.0 | 0 |
|