| 2750205 | 87610 | None | code01 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m | Cum | 266.2 | 266.2 | 182.62 | False | None | None | False | None | False | 48613.444 | 0 |
| 2750206 | 87610 | None | code02 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 292.6 | 292.6 | 127.83 | False | None | None | False | None | False | 37403.058 | 0 |
| 2750207 | 87610 | None | code03 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6230.4 | 6230.4 | 58.86 | False | None | None | False | None | False | 366721.344 | 0 |
| 2750208 | 87610 | None | code04 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. M25 Concrete For Foundation | Cum | 7527.17 | 7527.17 | 4.86 | False | None | None | False | None | False | 36582.0462 | 0 |
| 2750209 | 87610 | None | code05 | M25 Concrete For Plinth Beam | Cum | 10454.4 | 10454.4 | 23.31 | False | None | None | False | None | False | 243692.064 | 0 |
| 2750210 | 87610 | None | code06 | M25 Concrete For Columns | Cum | 11848.32 | 11848.32 | 1.8 | False | None | None | False | None | False | 21326.976 | 0 |
| 2750211 | 87610 | None | code07 | M25 Concrete For Lintel Beam | Cum | 11151.36 | 11151.36 | 4.16 | False | None | None | False | None | False | 46389.6576 | 0 |
| 2750212 | 87610 | None | code08 | M25 Concrete For Chajja | Cum | 10105.92 | 10105.92 | 0.79 | False | None | None | False | None | False | 7983.6768 | 0 |
| 2750213 | 87610 | None | code09 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings | Cum | 98402.7 | 98402.7 | 3.38 | False | None | None | False | None | False | 332601.126 | 0 |
| 2750214 | 87610 | None | code10 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 7027.9 | 7027.9 | 40.56 | False | None | None | False | None | False | 285051.624 | 0 |
| 2750215 | 87610 | None | code11 | Providing Flush Ruled pointing Pointing on stone work with cement mortar 1:3 (1 cement 3 fine sand) after raking joints to depth nicely lin x 005f ing including cost of materials labour curing as per specifications and as per directions of Engineer-in-charge | Sqm | 280.5 | 280.5 | 83.2 | False | None | None | False | None | False | 23337.6 | 0 |
| 2750216 | 87610 | None | code12 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6867.3 | 6867.3 | 9.9 | False | None | None | False | None | False | 67986.27 | 0 |
| 2750217 | 87610 | None | code13 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 819.5 | 819.5 | 66.0 | False | None | None | False | None | False | 54087.0 | 0 |
| 2750218 | 87610 | None | code14 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1322.2 | 1322.2 | 129.87 | False | None | None | False | None | False | 171714.114 | 0 |
| 2750219 | 87610 | None | code15 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1040.6 | 1040.6 | 30.6 | False | None | None | False | None | False | 31842.36 | 0 |
| 2750220 | 87610 | None | code16 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 337.7 | 337.7 | 108.0 | False | None | None | False | None | False | 36471.6 | 0 |
| 2750221 | 87610 | None | code17 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 278.3 | 278.3 | 173.16 | False | None | None | False | None | False | 48190.428 | 0 |
| 2750222 | 87610 | None | code18 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 239.8 | 239.8 | 64.08 | False | None | None | False | None | False | 15366.384 | 0 |
| 2750223 | 87610 | None | code19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 91.3 | 91.3 | 345.24 | False | None | None | False | None | False | 31520.412 | 0 |
| 2750224 | 87610 | None | code20 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 104.5 | 104.5 | 172.08 | False | None | None | False | None | False | 17982.36 | 0 |
| 2750225 | 87610 | None | code21 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 149.6 | 149.6 | 173.16 | False | None | None | False | None | False | 25904.736 | 0 |
| 2750226 | 87610 | None | code22 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 500x500 mm | Sqm | 1139.6 | 1139.6 | 46.08 | False | None | None | False | None | False | 52512.768 | 0 |
| 2750227 | 87610 | None | code23 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete | Sqm | 1071.4 | 1071.4 | 58.8 | False | None | None | False | None | False | 62998.32 | 0 |
| 2750228 | 87610 | None | code24 | Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) | Sqm | 5357.0 | 5357.0 | 2.16 | False | None | None | False | None | False | 11571.12 | 0 |
| 2750229 | 87610 | None | code25 | Providing & fixing of 2.5 track 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made | Sqm | 6426.2 | 6426.2 | 3.24 | False | None | None | False | None | False | 20820.888 | 0 |
| 2750230 | 87610 | None | code26 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Sqm | 522.5 | 522.5 | 12.6 | False | None | None | False | None | False | 6583.5 | 0 |
| 2750231 | 87610 | None | code27 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do- with both side prelam | Sqm | 4183.3 | 4183.3 | 12.6 | False | None | None | False | None | False | 52709.58 | 0 |
| 2750232 | 87610 | None | code28 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Each | 99432.3 | 99432.3 | 0.13 | False | None | None | False | None | False | 12926.199 | 0 |
| 2750233 | 87610 | None | code29 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. | Sqm | 5581.4 | 5581.4 | 7.56 | False | None | None | False | None | False | 42195.384 | 0 |
| 2750234 | 87610 | None | code30 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. | Each | 41.8 | 41.8 | 8.0 | False | None | None | False | None | False | 334.4 | 0 |
| 2750235 | 87610 | None | code31 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 915.2 | 915.2 | 6.0 | False | None | None | False | None | False | 5491.2 | 0 |
| 2750236 | 87610 | None | code32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | Each | 122.1 | 122.1 | 8.0 | False | None | None | False | None | False | 976.8 | 0 |
| 2750237 | 87610 | None | code33 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete | Each | 122.1 | 122.1 | 8.0 | False | None | None | False | None | False | 976.8 | 0 |
| 2750238 | 87610 | None | code34 | Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary | m | 70.0 | 70.0 | 50.0 | False | None | None | False | None | False | 3500.0 | 0 |
| 2750239 | 87610 | None | code35 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. | m | 80.0 | 80.0 | 50.0 | False | None | None | False | None | False | 4000.0 | 0 |
| 2750240 | 87610 | None | code36 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Point wiring using Copper wire without Switch. | Nos | 361.0 | 361.0 | 2.0 | False | None | None | False | None | False | 722.0 | 0 |
| 2750241 | 87610 | None | code37 | Suppling and fixing PVC/metal conduit deep juction boxes | Each | 51.0 | 51.0 | 6.0 | False | None | None | False | None | False | 306.0 | 0 |
| 2750242 | 87610 | None | code38 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1) 1-3Way | Each | 123.0 | 123.0 | 3.0 | False | None | None | False | None | False | 369.0 | 0 |
| 2750243 | 87610 | None | code39 | 2) 4-5Way | Mtr | 138.0 | 138.0 | 3.0 | False | None | None | False | None | False | 414.0 | 0 |
| 2750244 | 87610 | None | code40 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. | Each | 40.0 | 40.0 | 30.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 2750245 | 87610 | None | code41 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate 1) 6A mps one way | Each | 88.0 | 88.0 | 20.0 | False | None | None | False | None | False | 1760.0 | 0 |
| 2750246 | 87610 | None | code42 | 2) 6A mps Two way | Each | 152.0 | 152.0 | 10.0 | False | None | None | False | None | False | 1520.0 | 0 |
| 2750247 | 87610 | None | code43 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box 1) 1 to 3 Module | Each | 152.0 | 152.0 | 2.0 | False | None | None | False | None | False | 304.0 | 0 |
| 2750248 | 87610 | None | code44 | 2) 6 Module | Each | 244.0 | 244.0 | 1.0 | False | None | None | False | None | False | 244.0 | 0 |
| 2750249 | 87610 | None | code45 | Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete 8Way SP & N | Each | 1695.0 | 1695.0 | 2.0 | False | None | None | False | None | False | 3390.0 | 0 |
| 2750250 | 87610 | None | code46 | 12Way SP & N | Each | 2067.0 | 2067.0 | 1.0 | False | None | None | False | None | False | 2067.0 | 0 |
| 2750251 | 87610 | None | code47 | Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. | Each | 4831.0 | 4831.0 | 2.0 | False | None | None | False | None | False | 9662.0 | 0 |
| 2750252 | 87610 | None | code48 | 32-40 Amps 4 Pole | Each | 4677.0 | 4677.0 | 2.0 | False | None | None | False | None | False | 9354.0 | 0 |
| 2750253 | 87610 | None | code49 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | Each | 2999.7 | 2999.7 | 1.0 | False | None | None | False | None | False | 2999.7 | 0 |
| 2750254 | 87610 | None | code50 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | Each | 4150.0 | 4150.0 | 2.0 | False | None | None | False | None | False | 8300.0 | 0 |
| 2750255 | 87610 | None | code51 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required | Each | 118.0 | 118.0 | 30.0 | False | None | None | False | None | False | 3540.0 | 0 |
| 2750256 | 87610 | None | code52 | Supplying of recess mounting non integrated type LED down light 15 18W luminaire comprising of pressure decast / extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread life 25000 burning hours and Compliance to IS10322 IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly with PF 0.95, power loss should 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. | Each | 2174.0 | 2174.0 | 15.0 | False | None | None | False | None | False | 32610.0 | 0 |
| 2750257 | 87610 | None | code53 | Fixing all types and all capacities of fluorescent / fales ceiling /spot light /CFL / LED fittings indoor on the wall /ceiling / refters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps | Each | 119.0 | 119.0 | 15.0 | False | None | None | False | None | False | 1785.0 | 0 |
| 2750258 | 87610 | None | code54 | Supplying exhaust fan of 1440 RPM of 300 mm (12'') size with bracket blades complete for light duty suitable for operate of 230V 50Hz, AC Supply. | Each | 1542.0 | 1542.0 | 2.0 | False | None | None | False | None | False | 3084.0 | 0 |
| 2750259 | 87610 | None | code55 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge | Each | 110.0 | 110.0 | 2.0 | False | None | None | False | None | False | 220.0 | 0 |
| 2750260 | 87610 | None | code56 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bail bearing system. 48" Sweep (1200mm) | Each | 2949.0 | 2949.0 | 2.0 | False | None | None | False | None | False | 5898.0 | 0 |
| 2750261 | 87610 | None | code57 | Fixing a ceiling / wall mounting fan of all capacities and all types to the existing 's' hook with fan regulator to the existing board together with supplying and fixiting 5amps . Ceiling rose, necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring | Each | 150.0 | 150.0 | 2.0 | False | None | None | False | None | False | 300.0 | 0 |
| 2750262 | 87610 | None | code58 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore | Each | 379.5 | 379.5 | 15.0 | False | None | None | False | None | False | 5692.5 | 0 |
| 2750263 | 87610 | None | code59 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore | Each | 379.5 | 379.5 | 5.0 | False | None | None | False | None | False | 1897.5 | 0 |
| 2750264 | 87610 | None | code60 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia. | Nos | 97.9 | 97.9 | 12.0 | False | None | None | False | None | False | 1174.8 | 0 |
| 2750265 | 87610 | None | code61 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 1068.1 | 1068.1 | 4.0 | False | None | None | False | None | False | 4272.4 | 0 |
| 2750266 | 87610 | None | code62 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | Each | 4811.4 | 4811.4 | 4.0 | False | None | None | False | None | False | 19245.6 | 0 |
| 2750267 | 87610 | None | code63 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | Each | 4811.4 | 4811.4 | 4.0 | False | None | None | False | None | False | 19245.6 | 0 |
| 2750268 | 87610 | None | code64 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. | Each | 3958.9 | 3958.9 | 4.0 | False | None | None | False | None | False | 15835.6 | 0 |
| 2750269 | 87610 | None | code65 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm | Pan | 6747.4 | 6747.4 | 4.0 | False | None | None | False | None | False | 26989.6 | 0 |
| 2750270 | 87610 | None | code66 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Each | 5505.5 | 5505.5 | 4.0 | False | None | None | False | None | False | 22022.0 | 0 |
| 2750271 | 87610 | None | code67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 15mm nominal dia pipes. | Mtr | 336.6 | 336.6 | 58.0 | False | None | None | False | None | False | 19522.8 | 0 |
| 2750272 | 87610 | None | code68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia pipes. | Mtr | 410.3 | 410.3 | 50.0 | False | None | None | False | None | False | 20515.0 | 0 |
| 2750273 | 87610 | None | code69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 25mm nominal dia pipes. | Mtr | 523.6 | 523.6 | 50.0 | False | None | None | False | None | False | 26180.0 | 0 |
| 2750274 | 87610 | None | code70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 32mm nominal dia pipes | Mtr | 611.6 | 611.6 | 50.0 | False | None | None | False | None | False | 30580.0 | 0 |
| 2750275 | 87610 | None | code71 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :14.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 7290.8 | 7290.8 | 5.0 | False | None | None | False | None | False | 36454.0 | 0 |
| 2750276 | 87610 | None | code72 | Providing and placing on terrace(at all floor levels), polyethylene water storage tanks as per IS 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank(For 1000 litre capacity) | Ltr | 8.8 | 8.8 | 2000.0 | False | None | None | False | None | False | 17600.0 | 0 |
| 2750277 | 87610 | None | code73 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge | Sqm | 880.0 | 880.0 | 233.2 | False | None | None | False | None | False | 205216.0 | 0 |
| 2750278 | 87610 | None | code74 | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) | Mtr | 509.3 | 509.3 | 192.0 | False | None | None | False | None | False | 97785.6 | 0 |
| 2750279 | 87610 | None | code75 | Painting Two Coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. (The cost of PCC shall be paid extra) | Sqm | 119.9 | 119.9 | 50.32 | False | None | None | False | None | False | 6033.368 | 0 |
| 2750280 | 87610 | None | code76 | Executive Bench Made Out of Sadarahalli Grey Granite Stone with Hand Supports with 3 Line Finishing with arch/plain design with 100mm slabs Height 90 x Length 1500 width 45 cms (1.50* 0.45* 0.90m) including lead and Lift Charges as per direction of Engineer In charge | Each | 18200.0 | 18200.0 | 25.0 | False | None | None | False | None | False | 455000.0 | 0 |
| 2750281 | 87610 | None | code77 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charg | Kgs | 149.6 | 149.6 | 79.38 | False | None | None | False | None | False | 11875.248 | 0 |
| 2750282 | 87610 | None | code78 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. | Cum | 81.4 | 81.4 | 146.09 | False | None | None | False | None | False | 11891.726 | 0 |
| 2750283 | 87610 | None | code79 | Cost of Haulage Excluding Loading and Unloading Taking output 25 t load and lead 10 km = 250 t.km | T.Km | 105.6 | 105.6 | 146.09 | False | None | None | False | None | False | 15427.104 | 0 |