| 1708599988000 | 0 | None | None | Water supply/sewage lines | Construction of OHT 0.50 Lakh Ltr Capacity at Ummathuru Village in Ummathuru GP | 1779232.62 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2762434 | 87984 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m | Cum | 73.0 | 73.0 | 48.04 | False | None | None | False | None | False | 3506.92 | 0 | | 2762435 | 87984 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately). PCC 1:3:6 using 40 mm aggregate | Cum | 5742.0 | 5742.0 | 2.9 | False | None | None | False | None | False | 16651.8 | 0 | | 2762436 | 87984 | None | code03 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, strutting, plywood / steel form work , Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) (Minimum cement content: 340 kgs (6.80 bags)).RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick etc. | Cum | 9689.0 | 9689.0 | 9.72 | False | None | None | False | None | False | 94177.08 | 0 | | 2762437 | 87984 | None | code04 | Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted, using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate for level 6m to 9m height. | Cum | 13731.0 | 13731.0 | 9.16 | False | None | None | False | None | False | 125775.96 | 0 | | 2762438 | 87984 | None | code05 | Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). | Cum | 20305.0 | 20305.0 | 7.79 | False | None | None | False | None | False | 158175.95 | 0 | | 2762439 | 87984 | None | code06 | Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate | Cum | 21359.0 | 21359.0 | 8.89 | False | None | None | False | None | False | 189881.51 | 0 | | 2762440 | 87984 | None | code07 | Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs
(7.20 bags)) -RCC M30 Design Mix with 20mm aggregate | Cum | 20696.0 | 20696.0 | 3.23 | False | None | None | False | None | False | 66848.08 | 0 | | 2762441 | 87984 | None | code08 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for
R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 106.0 | 106.0 | 4460.85 | False | None | None | False | None | False | 472850.1 | 0 | | 2762442 | 87984 | None | code09 | Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 8mm | Mtr | 4323.0 | 4323.0 | 13.0 | False | None | None | False | None | False | 56199.0 | 0 | | 2762443 | 87984 | None | code10 | Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete | Mtr | 3099.0 | 3099.0 | 3.5 | False | None | None | False | None | False | 10846.5 | 0 | | 2762444 | 87984 | None | code11 | Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel. For over head tanks upto 2.5 lakhs capacity. | Each | 5750.0 | 5750.0 | 1.0 | False | None | None | False | None | False | 5750.0 | 0 | | 2762445 | 87984 | None | code12 | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc. | Each | 2111.0 | 2111.0 | 1.0 | False | None | None | False | None | False | 2111.0 | 0 | | 2762446 | 87984 | None | code13 | Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23
M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for: MS Guage sheet for 2.0 m depth | Each | 4440.0 | 4440.0 | 1.0 | False | None | None | False | None | False | 4440.0 | 0 | | 2762447 | 87984 | None | code14 | Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete. For DI/CI puddle flanges of 80mm dia.80mmDia | Each | 1526.0 | 1526.0 | 4.0 | False | None | None | False | None | False | 6104.0 | 0 | | 2762448 | 87984 | None | code15 | Providing plastering in CM 1:3 proportion for RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffolding and giving satisfactory water proof testing as per direction etc. complete with all lead lifts etc. for side walls, shell portions, bottom doom, bottom slab and ribs etc. for: 12mm thick for exposed surfaces | Sqm | 299.0 | 299.0 | 242.41 | False | None | None | False | None | False | 72480.59 | 0 | | 2762449 | 87984 | None | code16 | Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for: Tanks staging above 6 m and upto 9 m | Sqm | 153.0 | 153.0 | 242.41 | False | None | None | False | None | False | 37088.73 | 0 | | 2762450 | 87984 | None | code17 | Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | cm | 3.0 | 3.0 | 1200.0 | False | None | None | False | None | False | 3600.0 | 0 | | 2762451 | 87984 | None | code18 | Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For80mm Dia | Each | 8013.0 | 8013.0 | 5.0 | False | None | None | False | None | False | 40065.0 | 0 | | 2762452 | 87984 | None | code19 | Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. For double flanged CI pipes of 80mmdia.2.75 meter length, 80mm dia | Mtr | 2205.0 | 2205.0 | 40.0 | False | None | None | False | None | False | 88200.0 | 0 | | 2762453 | 87984 | None | code20 | Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.ii 80mm CI All flanged Tee IS | Nos | 320.0 | 320.0 | 2.0 | False | None | None | False | None | False | 640.0 | 0 | | 2762454 | 87984 | None | code21 | Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 80X900mm | Each | 2365.0 | 2365.0 | 4.0 | False | None | None | False | None | False | 9460.0 | 0 | | 2762455 | 87984 | None | code22 | Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc.complete. | Each | 8606.0 | 8606.0 | 1.0 | False | None | None | False | None | False | 8606.0 | 0 | | 2762456 | 87984 | None | code23 | Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 750mm including curing, painting GI pipes with two coats of anticorrosive steel paint over a primer coat etc. with all lead lift etc. (The rate per meter is for 3 rows of GI pipes and RCC post) | Mtr | 1098.0 | 1098.0 | 49.07 | False | None | None | False | None | False | 53878.86 | 0 | | 2762457 | 87984 | None | code24 | Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808 | Mtr | 401.0 | 401.0 | 24.0 | False | None | None | False | None | False | 9624.0 | 0 | | 2762458 | 87984 | None | code25 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). - PCC 1:2:4 using 40 mm aggregate | Cum | 5911.0 | 5911.0 | 3.6 | False | None | None | False | None | False | 21279.6 | 0 | | 2762459 | 87984 | None | code26 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the equirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates | Cum | 6471.0 | 6471.0 | 5.4 | False | None | None | False | None | False | 34943.4 | 0 | | 2762460 | 87984 | None | code27 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 131.0 | 131.0 | 100.0 | False | None | None | False | None | False | 13100.0 | 0 | | 2762461 | 87984 | None | code28 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m | Cum | 110.0 | 110.0 | 4.54 | False | None | None | False | None | False | 499.4 | 0 | | 2762462 | 87984 | None | code29 | Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vib rators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Set | 5752.0 | 5752.0 | 0.324 | False | None | None | False | None | False | 1863.648 | 0 | | 2762463 | 87984 | None | code30 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6096.0 | 6096.0 | 1.818 | False | None | None | False | None | False | 11082.528 | 0 | | 2762464 | 87984 | None | code31 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure/ Superstructure complete as per Drawing and Technical Specifications.Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. | Tonne | 94295.0 | 94295.0 | 0.109 | False | None | None | False | None | False | 10278.155 | 0 | | 2762465 | 87984 | None | code32 | Raising main:- Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m | Cum | 371.0 | 371.0 | 113.4 | False | None | None | False | None | False | 42071.4 | 0 | | 2762466 | 87984 | None | code33 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used.PE80(PN 6.0 / 6 Kg/cm2BASIC RATE 75MMdia (It.No:12.2 SOR Code K080B)75 mm | Mtr | 290.78 | 290.78 | 280.0 | False | None | None | False | None | False | 81418.4 | 0 | | 2762467 | 87984 | None | code34 | Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation. For PN 10.0 50 mm | Each | 22942.0 | 22942.0 | 1.0 | False | None | None | False | None | False | 22942.0 | 0 | | 2762468 | 87984 | None | code35 | 63 MM ELECTRO FUSION COUPLER | Each | 153.0 | 153.0 | 7.0 | False | None | None | False | None | False | 1071.0 | 0 | | 2762469 | 87984 | None | code36 | 63 MM ELECTRO FUSION ELBOW | Each | 246.0 | 246.0 | 7.0 | False | None | None | False | None | False | 1722.0 | 0 |
|