| 1708686997000 | 0 | None | None | Buildings | Providing & installing of Additional pipelane and pump to the well and Repair of underdrainage at 2nd Basement of New Annex Building and Construction of Borewell At CMM Court, Nrupathunga Road,Bengaluru. | 642996.34 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2786783 | 89049 | None | 12.4 | Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test.(Comn-SR V-5, SOR Code -12.4 page no:140)SR-23-24 ---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Each | 5816.8 | 5816.8 | 2.0 | False | None | None | False | None | False | 11633.6 | 0 | | 2786784 | 89049 | None | 1.00 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [WS&UW CSR 2021-22, Vol:V, Chapter No:14, Item No.1, SOR CODE:O010].
0.00 to 50.00 M ---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 407.0 | 407.0 | 50.0 | False | None | None | False | None | False | 20350.0 | 0 | | 2786785 | 89049 | None | 1.0a | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [WS&UW CSR 2021-22, Vol:V, Chapter No:14, Item No.1, SOR CODE:O010]. 50.0 to 100.00 M
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 510.4 | 510.4 | 50.0 | False | None | None | False | None | False | 25520.0 | 0 | | 2786786 | 89049 | None | 1.0c | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [WS&UW CSR 2021-22, Vol:V, Chapter No:14, Item No.1, SOR CODE:O010].
100.00 to 150.00 M ---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 542.3 | 542.3 | 50.0 | False | None | None | False | None | False | 27115.0 | 0 | | 2786787 | 89049 | None | 1.0d | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [WS&UW CSR 2021-22, Vol:V, Chapter No:14, Item No.1, SOR CODE:O010].
150.00 to 200.00 M ---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 629.2 | 629.2 | 50.0 | False | None | None | False | None | False | 31460.0 | 0 | | 2786788 | 89049 | None | 1.0e | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [WS&UW CSR 2021-22, Vol:V, Chapter No:14, Item No.1, SOR CODE:O010].
200.00 to 231.00 M ---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 738.1 | 738.1 | 31.0 | False | None | None | False | None | False | 22881.1 | 0 | | 2786789 | 89049 | None | 12.32 | Supply of ISI Mark 175 mm nominal Bore, plain end steel casing Pipe-grade of Steel Fe 410 of wall thickness 5.4mm thick confirming to IS 4270:2001 and latest amendments, electric resistance welded steel tube material and confirming to IS 1387/1993 and manufactured by basic open hearth eletric or basic oxygen process in random length of 5 to 7 mts. Both ends threaded confirming to IS 554/1985, one end fixed with socket confirming to IS 4270:2001 and the other end with screwed pipes. All pipes shall be reasonably free from defects. the tubes shall be reasonably straight should be with ISI Marking, weighing 25.10kg/mtr. (Inclusive of all taxes and durties). Prices include Collar-medium duty. [ CSR 2023-24 Vol:V, , Item No.12.32, [g no:143 ]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 2126.3 | 2126.3 | 40.0 | False | None | None | False | None | False | 85052.0 | 0 | | 2786790 | 89049 | None | 12.34 | Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge [ CSR 2023-24, Vol:V, Chapter No:14, Item No.12.34,P-no-143 ] No 1.00
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Nos | 180.4 | 180.4 | 1.0 | False | None | None | False | None | False | 180.4 | 0 | | 2786791 | 89049 | None | 13.19 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. [WS&UW CSR 2023-24,Vol-V, Item No: 13.19.6,P.no-153]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Each | 85759.3 | 85759.3 | 2.0 | False | None | None | False | None | False | 171518.6 | 0 | | 2786792 | 89049 | None | 13.37 | Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover)[WS&UW CSR 2023-24,Vol-V, Chapter No-15, Item No: 13.37, p-155]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Each | 3050.0 | 3050.0 | 34.0 | False | None | None | False | None | False | 103700.0 | 0 | | 2786793 | 89049 | None | 22.50 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. [ CSR 2023-24,Vol-V, Item No: 22.5, SOR CODE P240]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Rmtr | 203.5 | 203.5 | 250.0 | False | None | None | False | None | False | 50875.0 | 0 | | 2786794 | 89049 | None | 13.24.3 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter 6 to 15 HP pumps[ CSR 2023-24,Vol-V, Item No:13.24.3P-155 ]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Each | 19250.0 | 19250.0 | 1.0 | False | None | None | False | None | False | 19250.0 | 0 | | 2786795 | 89049 | None | 13.24.1 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments [CSR 2023-24,Vol-V, , Item No:13.24.1, pN154 SOR CODE P260A]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Each | 1375.0 | 1375.0 | 1.0 | False | None | None | False | None | False | 1375.0 | 0 | | 2786796 | 89049 | None | 6.5 | Providing wrought mild steel (galvanized) 50 mmm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any [ CSR 2023-24,Vol-V, , Item No: 6.5, SOR CODE N090F]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 293.7 | 293.7 | 32.0 | False | None | None | False | None | False | 9398.4 | 0 | | 2786797 | 89049 | None | 11.7.6 | Supply and delivery at site wrought middle steel (galvanized) 50 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any [WS&UW CSR 2023-24,Vol-V, , Item No:11.7.6, PN 129SOR CODE N100F]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 293.7 | 293.7 | 3.0 | False | None | None | False | None | False | 881.1 | 0 | | 2786798 | 89049 | None | 11.12.6 | Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any [WS&UW CSR 2023-24,Vol-V, , Item No: 11.12.6, PNo131 ]
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Each | 293.7 | 293.7 | 1.0 | False | None | None | False | None | False | 293.7 | 0 | | 2786799 | 89049 | None | 1.4.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including ressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available xcavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.Comn-SR V-1, Item No - 1.4.1)
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | Cum | 266.2 | 266.2 | 16.2 | False | None | None | False | None | False | 4312.44 | 0 | | 2786800 | 89049 | None | 13.31.4 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement testing of joints complete as per direction of Engineer in charge,40mm nominal dia (Comn-SR V-2, Item No - 13.31.4 ,P-142)
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 440.0 | 440.0 | 60.0 | False | None | None | False | None | False | 26400.0 | 0 | | 2786801 | 89049 | None | 13.33.7 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. as per direction of Engineer in charge. external work 65mm Nominal dia Pipes (P. No - 123, I. No - 13.33.7, S R 2023-24 Vol-2)
---- the item is inclusive of all materials, lead and lift ,loading and unloading, Transportation charges and other incidental charges and work should be carried out as per the directions of the Engineer-in-charge of the work. | m | 1540.0 | 1540.0 | 20.0 | False | None | None | False | None | False | 30800.0 | 0 |
|