createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1708840339654 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2310.00 emd 186100.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 04-03-2024 17:00:00 tenderQueryClose 29-02-2024 17:00:00 technicalBidOpen 05-03-2024 17:01:00 publishedDate 25-02-2024 13:17:36 publishedByPost RDPR_EE_DIV_VJN publishedByUser KPE12111 - J R PAMPAPATHI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 28-02-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Yashaswini S R splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08392242173 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1708840339691 version 8 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT4286 title Providing basic facilities to Karnataka public schools of Kogali village of Hagaribommanahalli taluk. (Govt Primary School, Govt Higher Primary School and Govt High School) Rs. 93.05 lakhs (Under KPS) description Providing basic facilities to Karnataka public schools of Kogali village of Hagaribommanahalli taluk. (Govt Primary School, Govt Higher Primary School and Govt High School) Rs. 93.05 lakhs (Under KPS) category WORKS categoryText Works ecv 9211639.19 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 943 locationName RDPR Division Office Vijayanagara provisionalAmount 9305000.0 groupOverheadTotal 1405165.3 fileNumber 2023-24/KPS/93
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1708840340000 1 None None Buildings Providing basic facilities to Karnataka public schools of Kogali village of Hagaribommanahalli taluk. (Govt Primary School, Govt Higher Primary School and Govt High School) (Construction of New Class Rooms For Pre-Primary ) 2256885.23 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2803747 90175 None PRE01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. (PWD SR 2023-24, V-1, I No: 1.15.1, P-8) Cum 381.15 381.15 103.0171 False None None False None False 39264.967665 0 2803748 90175 None PRE02 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. (PWD SR 2023-24, V-2, I No: 4.1, P-5) Sqm 123.9 123.9 57.924 False None None False None False 7176.7836 0 2803749 90175 None PRE03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-1, Item No.2.1.2, Page No.15) Cum 5947.2 5947.2 25.412 False None None False None False 151130.2464 0 2803750 90175 None PRE04 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) .(PWD SR 2023-24, V-2, Item No.5.1.1, Page No.9) Cum 5891.55 5891.55 29.1818 False None None False None False 171926.03379 0 2803751 90175 None PRE05 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) .(PWD SR 2023-24, V-2, Item No.5.4, Page No.9) Cum 6708.45 6708.45 13.1522 False None None False None False 88230.87609 0 2803752 90175 None PRE06 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, Item No.2.3.1, Page No.16) Cum 6639.15 6639.15 2.3809 False None None False None False 15807.152235 0 2803753 90175 None PRE07 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m..(PWD SR 2023-24, V-1, Item No.1.9, Page No.7) Cum 279.3 279.3 128.3855 False None None False None False 35858.07015 0 2803754 90175 None PRE08 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD SR 2023-24, V-2, I No.6.8, P-14) Cum 8367.45 8367.45 21.3103 False None None False None False 178312.869735 0 2803755 90175 None PRE09 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, I No.2.4.2, P-16) Cum 6639.15 6639.15 10.2888 False None None False None False 68308.88652 0 2803756 90175 None PRE10 Form work, centering and scaffolding for Foundation upto Plinth b) All other types, 3% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:1 (b), P-111) Cum 199.17 199.17 10.2888 False None None False None False 2049.220296 0 2803757 90175 None PRE11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, I No.2.5.1, P-16) Cum 6961.5 6961.5 43.5622 False None None False None False 303258.2553 0 2803758 90175 None PRE12 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings. (PWD SR 2023-24, V-1, I No.2.11 (a), P-18) Tonne 93929.85 93929.85 4.4509 False None None False None False 418072.369365 0 2803759 90175 None PRE13 Form work, centering and scaffolding for RCC Columns / Shaft (Slip Centering), 70% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:9, P-111) Cum 4873.05 4873.05 5.5189 False None None False None False 26893.875645 0 2803760 90175 None PRE14 Form work, centering and scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections, 45% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:19, P-112) Cum 3132.67 3132.67 0.135 False None None False None False 422.91045 0 2803761 90175 None PRE15 Form work, centering and scaffolding for RCC Beams, Lintels & Troughs of Aqueducts, 60% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:14, P-112) Cum 4176.9 4176.9 19.5291 False None None False None False 81571.09779 0 2803762 90175 None PRE16 Form work, centering and scaffolding for RCC Roof Slabs, 50% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:15, P-112) Cum 3480.75 3480.75 18.3792 False None None False None False 63973.4004 0 2803763 90175 None PRE17 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.2.2, P-41) Sqm 292.95 292.95 158.76 False None None False None False 46508.742 0 2803764 90175 None PRE18 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.8, P-42) Sqm 389.55 389.55 157.4683 False None None False None False 61341.776265 0 2803765 90175 None PRE19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, V-2, I No.8.51, P-50) Sqm 105.0 105.0 101.696 False None None False None False 10678.08 0 2803766 90175 None PRE20 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24, V-2, I No.11.5.2, P-77) Sqm 4454.1 4454.1 20.16 False None None False None False 89794.656 0 2803767 90175 None PRE21 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (PWD SR 2023-24, V-2, I No.11.34A, P-86) Kg 176.4 176.4 204.12 False None None False None False 36006.768 0 2803768 90175 None PRE22 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. (PWD SR 2023-24, V-2, I No.9.34, P-64) Sqm 1622.25 1622.25 106.8 False None None False None False 173256.3 0 2803769 90175 None PRE23 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (PWD SR 2023-24, V-2, I No.9.36, P-64) Sqm 1732.5 1732.5 6.48 False None None False None False 11226.6 0 2803770 90175 None PRE24 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. (PWD SR 2023-24, V-2, I No.9.1, P-59) Sqm 473.55 473.55 33.885 False None None False None False 16046.24175 0 2803771 90175 None PRE25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.25, P-45) Sqm 143.85 143.85 158.76 False None None False None False 22837.626 0 2803772 90175 None PRE26 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.28, P-45) Sqm 93.45 93.45 157.4683 False None None False None False 14715.412635 0 2803773 90175 None PRE27 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.40, P-48) Sqm 120.75 120.75 46.728 False None None False None False 5642.406 0 2803774 90175 None PRE28 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (PWD SR 2023-24, V-2, I No.11.25.2, P-84) Kg 142.8 142.8 28.35 False None None False None False 4048.38 0 2803775 90175 None PRE29 Cement Board. (PWD SR 2023-24, V-2, I No.185, P-A-17) Sqm 308.7 308.7 11.52 False None None False None False 3556.224 0 2803776 90175 None PRE30 Student Desk : Of Size 4feet length x 2.5feet Height Bench top 12", Desk top 15" using 1"x2" Sq.Pipe and 20G book shelf, 18mm Brown/Teak colour Novapan top for Bench and Desk. (KSFIC SR 2022-23, SI.No..132 P.No.12 ) Each 9320.0 9320.0 7.0 False None None False None False 65240.0 0 2803777 90175 None PRE31 Concealed Conduit System Supplying heavygauge PVC conduit pipe..... mm dia....... mm thick confirming toIS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc.,and running before concreting thes lab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures ,run with 18 SWGGI fish wire wherever necessary-25 mm dia 2 mm thick. (PWD EL SR. 2023-24, Vol-6, I No-1.2.2, P No-2) Rmtr 78.0 78.0 100.0 False None None False None False 7800.0 0 2803778 90175 None PRE32 Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall andf ixing by bracing UorJ hooks and cement plastering upto the wall surface and run with18SWGGI fishwire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick. (PWD EL SR. 2023-24, Vol-6, I No-1.3.2, P No-2) Rmtr 79.0 79.0 100.0 False None None False None False 7900.0 0 2803779 90175 None PRE33 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick / Stone/C.C wall. 1-2 Way.(PWD EL SR. 2023-24, Vol-6, I No-3.4.1, P No-8) Each 103.0 103.0 6.0 False None None False None False 618.0 0 2803780 90175 None PRE34 Supplying of..... feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater Than 80.Power Input : 220-240V@50/60Hz & Power factor Greater Than 0.9 along with CE approved.2yearsWarranty against any manufacturing defect working unde rstandard electrical condition. LED light fitting 1 x 2feet - 9/10 W. (PWD EL SR. 2023-24, Vol-6, I No-11.3.1, P No-43) Each 551.0 551.0 8.0 False None None False None False 4408.0 0 2803781 90175 None PRE35 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model. (PWD EL SR. 2023-24, Vol-6, I No-6.3.1, P No-30) Each 2984.0 2984.0 4.0 False None None False None False 11936.0 0 2803782 90175 None PRE36 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.1, P No-5) Point 269.0 269.0 4.0 False None None False None False 1076.0 0 2803783 90175 None PRE37 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet vias witch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.2, P No-5) Point 379.0 379.0 6.0 False None None False None False 2274.0 0 2803784 90175 None PRE38 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto10Mtr from tapping point to outlet via switch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.3, P No-5) Point 555.0 555.0 4.0 False None None False None False 2220.0 0 2803785 90175 None PRE39 Supplying 6A flush type socket and 6A flush type SP switch either surface / flush mounting in existing gang box or in 4mm thick plastic sheet and fixing overa flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way. (PWD EL SR. 2023-24, Vol-6, I No-3.1.1, P No-8) Each 128.0 128.0 14.0 False None None False None False 1792.0 0 2803786 90175 None PRE40 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (PWD EL SR. 2023-24, Vol-6, I No-3.8, P No-9) Sq CM 0.41 0.41 300.0 False None None False None False 123.0 0 2803787 90175 None PRE41 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBfeets single phase / 3phase/ single door with powder coated painting Made out of 14SWG MS enclosure. II - Double Door-6 Way SP & N (PWD EL SR. 2023-24, Vol-6, I No-5.19.7, P No-18) Each 1791.0 1791.0 2.0 False None None False None False 3582.0 0 1708840340000 1 None None Buildings Providing basic facilities to Karnataka public schools of Kogali village of Hagaribommanahalli taluk. (Govt Primary School, Govt Higher Primary School and Govt High School) (Construction of (CMPTR-SCIENCE-ART Room) 4182426.33 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2803788 90176 None PRE01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. (PWD SR 2023-24, V-1, I No: 1.15.1, P-8) Cum 381.15 381.15 231.592 False None None False None False 88271.2908 0 2803789 90176 None PRE02 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. (PWD SR 2023-24, V-2, I No: 4.1, P-5) Sqm 123.9 123.9 139.716 False None None False None False 17310.8124 0 2803790 90176 None PRE03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-1, Item No.2.1.2, Page No.15) Cum 5947.2 5947.2 52.8625 False None None False None False 314383.86 0 2803791 90176 None PRE04 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) .(PWD SR 2023-24, V-2, Item No.5.1.1, Page No.9) Cum 5891.55 5891.55 59.098 False None None False None False 348178.8219 0 2803792 90176 None PRE05 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) .(PWD SR 2023-24, V-2, Item No.5.4, Page No.9) Cum 6708.45 6708.45 23.1968 False None None False None False 155614.57296 0 2803793 90176 None PRE06 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, Item No.2.3.1, Page No.16) Cum 6639.15 6639.15 5.6521 False None None False None False 37525.139715 0 2803794 90176 None PRE07 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m..(PWD SR 2023-24, V-1, Item No.1.9, Page No.7) Cum 279.3 279.3 281.069 False None None False None False 78502.5717 0 2803795 90176 None PRE08 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD SR 2023-24, V-2, I No.6.8, P-14) Cum 8367.45 8367.45 39.0051 False None None False None False 326373.223995 0 2803796 90176 None PRE09 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, I No.2.4.2, P-16) Cum 6639.15 6639.15 24.336 False None None False None False 161570.3544 0 2803797 90176 None PRE10 Form work, centering and scaffolding for Foundation upto Plinth b) All other types, 3% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:1 (b), P-111) Cum 199.17 199.17 24.336 False None None False None False 4847.00112 0 2803798 90176 None PRE11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, I No.2.5.1, P-16) Cum 6961.5 6961.5 69.3405 False None None False None False 482713.89075 0 2803799 90176 None PRE12 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings. (PWD SR 2023-24, V-1, I No.2.11 (a), P-18) Tonne 93929.85 93929.85 7.2359 False None None False None False 679667.001615 0 2803800 90176 None PRE13 Form work, centering and scaffolding for RCC Columns / Shaft (Slip Centering), 70% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:9, P-111) Cum 4873.05 4873.05 9.07 False None None False None False 44198.5635 0 2803801 90176 None PRE14 Form work, centering and scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections, 45% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:19, P-112) Cum 3132.67 3132.67 0.54 False None None False None False 1691.6418 0 2803802 90176 None PRE15 Form work, centering and scaffolding for RCC Beams, Lintels & Troughs of Aqueducts, 60% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:14, P-112) Cum 4176.9 4176.9 23.172 False None None False None False 96787.1268 0 2803803 90176 None PRE16 Form work, centering and scaffolding for RCC Roof Slabs, 50% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:15, P-112) Cum 3480.75 3480.75 36.5583 False None None False None False 127250.302725 0 2803804 90176 None PRE17 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.2.2, P-41) Sqm 292.95 292.95 301.05 False None None False None False 88192.5975 0 2803805 90176 None PRE18 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.8, P-42) Sqm 389.55 389.55 261.3883 False None None False None False 101823.812265 0 2803806 90176 None PRE19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, V-2, I No.8.51, P-50) Sqm 105.0 105.0 189.136 False None None False None False 19859.28 0 2803807 90176 None PRE20 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24, V-2, I No.11.5.2, P-77) Sqm 4454.1 4454.1 28.08 False None None False None False 125071.128 0 2803808 90176 None PRE21 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (PWD SR 2023-24, V-2, I No.11.34A, P-86) Kg 176.4 176.4 453.6 False None None False None False 80015.04 0 2803809 90176 None PRE22 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD SR 2023-24, V-2, I No.9.23, P-63) Sqm 2589.3 2589.3 202.104 False None None False None False 523307.8872 0 2803810 90176 None PRE23 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (PWD SR 2023-24, V-2, I No.9.36, P-64) Sqm 1732.5 1732.5 20.79 False None None False None False 36018.675 0 2803811 90176 None PRE24 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. (PWD SR 2023-24, V-2, I No.9.1, P-59) Sqm 473.55 473.55 68.211 False None None False None False 32301.31905 0 2803812 90176 None PRE25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.25, P-45) Sqm 143.85 143.85 301.05 False None None False None False 43306.0425 0 2803813 90176 None PRE26 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.28, P-45) Sqm 93.45 93.45 261.3883 False None None False None False 24426.736635 0 2803814 90176 None PRE27 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.40, P-48) Sqm 120.75 120.75 66.528 False None None False None False 8033.256 0 2803815 90176 None PRE28 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (PWD SR 2023-24, V-2, I No.11.25.2, P-84) Kg 142.8 142.8 296.73 False None None False None False 42373.044 0 2803816 90176 None PRE29 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24, V-2, I No.8.49, P-49) cm 4.2 4.2 2000.0 False None None False None False 8400.0 0 2803817 90176 None PRE30 Cement Board. (PWD SR 2023-24, V-2, I No.185, P-A-17) Sqm 308.7 308.7 17.28 False None None False None False 5334.336 0 2803818 90176 None PRE31 Concealed Conduit System Supplying heavygauge PVC conduit pipe..... mm dia....... mm thick confirming toIS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc.,and running before concreting thes lab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures ,run with 18 SWGGI fish wire wherever necessary-25 mm dia 2 mm thick. (PWD EL SR. 2023-24, Vol-6, I No-1.2.2, P No-2) Rmtr 78.0 78.0 225.0 False None None False None False 17550.0 0 2803819 90176 None PRE32 Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall andf ixing by bracing UorJ hooks and cement plastering upto the wall surface and run with18SWGGI fishwire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick. (PWD EL SR. 2023-24, Vol-6, I No-1.3.2, P No-2) Rmtr 79.0 79.0 225.0 False None None False None False 17775.0 0 2803820 90176 None PRE33 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick / Stone/C.C wall. 1-2 Way.(PWD EL SR. 2023-24, Vol-6, I No-3.4.1, P No-8) Each 103.0 103.0 15.0 False None None False None False 1545.0 0 2803821 90176 None PRE34 Supplying of..... feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than80.Power Input : 220-240V@50/60Hz & Power factor Greater than0.9 along with CE approved.2yearsWarranty against any manufacturing defect working unde rstandard electrical condition. LED light fitting 1 x 2feet - 9/10 W. (PWD EL SR. 2023-24, Vol-6, I No-11.3.1, P No-43) Each 551.0 551.0 12.0 False None None False None False 6612.0 0 2803822 90176 None PRE35 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model. (PWD EL SR. 2023-24, Vol-6, I No-6.3.1, P No-30) Each 2984.0 2984.0 6.0 False None None False None False 17904.0 0 2803823 90176 None PRE36 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.1, P No-5) Point 269.0 269.0 6.0 False None None False None False 1614.0 0 2803824 90176 None PRE37 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet vias witch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.2, P No-5) Point 379.0 379.0 9.0 False None None False None False 3411.0 0 2803825 90176 None PRE38 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto10Mtr from tapping point to outlet via switch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.3, P No-5) Point 555.0 555.0 6.0 False None None False None False 3330.0 0 2803826 90176 None PRE39 Supplying 6A flush type socket and 6A flush type SP switch either surface / flush mounting in existing gang box or in 4mm thick plastic sheet and fixing overa flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way. (PWD EL SR. 2023-24, Vol-6, I No-3.1.1, P No-8) Each 128.0 128.0 30.0 False None None False None False 3840.0 0 2803827 90176 None PRE40 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (PWD EL SR. 2023-24, Vol-6, I No-3.8, P No-9) Sq CM 0.41 0.41 300.0 False None None False None False 123.0 0 2803828 90176 None PRE41 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBfeets single phase / 3phase/ single door with powder coated painting Made out of 14SWG MS enclosure. II - Double Door-6 Way SP & N (PWD EL SR. 2023-24, Vol-6, I No-5.19.7, P No-18) Each 1791.0 1791.0 3.0 False None None False None False 5373.0 0 1708840340000 1 None None Buildings Providing basic facilities to Karnataka public schools of Kogali village of Hagaribommanahalli taluk. (Govt Primary School, Govt Higher Primary School and Govt High School) (Construction of Library at First Floor) 1367162.33 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2803829 90177 None PRE01 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, I No.2.5.1, P-16) Cum 7027.8 7027.8 28.7614 False None None False None False 202129.36692 0 2803830 90177 None PRE02 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings. (PWD SR 2023-24, V-1, I No.2.11 (a), P-18) Tonne 94824.42 94824.42 3.052 False None None False None False 289404.12984 0 2803831 90177 None PRE03 Form work, centering and scaffolding for RCC Columns / Shaft (Slip Centering), 70% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:9, P-111) Cum 4919.46 4919.46 3.5548 False None None False None False 17487.696408 0 2803832 90177 None PRE04 Form work, centering and scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections, 45% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:19, P-112) Cum 3162.51 3162.51 0.27 False None None False None False 853.8777 0 2803833 90177 None PRE05 Form work, centering and scaffolding for RCC Beams, Lintels & Troughs of Aqueducts, 60% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:14, P-112) Cum 4216.68 4216.68 8.405 False None None False None False 35441.1954 0 2803834 90177 None PRE06 Form work, centering and scaffolding for RCC Roof Slabs, 50% of Basic rate of concrete. (PWD SR 2023-24, V-1, I No:15, P-112) Cum 3513.9 3513.9 16.5315 False None None False None False 58090.03785 0 2803835 90177 None PRE07 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD SR 2023-24, V-2, I No.6.8, P-14) Sqm 8447.14 8447.14 23.5917 False None None False None False 199282.392738 0 2803836 90177 None PRE08 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR 2023-24, V-2, Item No.2.3.1, Page No.16) Cum 6702.38 6702.38 0.5683 False None None False None False 3808.962554 0 2803837 90177 None PRE09 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.2.2, P-41) Sqm 295.74 295.74 118.908 False None None False None False 35165.85192 0 2803838 90177 None PRE10 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.8, P-42) Sqm 393.26 393.26 211.1772 False None None False None False 83047.545672 0 2803839 90177 None PRE11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24, V-2, I No.8.51, P-50) Sqm 106.0 106.0 93.7125 False None None False None False 9933.525 0 2803840 90177 None PRE12 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24, V-2, I No.11.5.2, P-77) Sqm 4496.52 4496.52 12.6 False None None False None False 56656.152 0 2803841 90177 None PRE13 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (PWD SR 2023-24, V-2, I No.11.34A, P-86) Kg 178.08 178.08 226.8 False None None False None False 40388.544 0 2803842 90177 None PRE14 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. (PWD SR 2023-24, V-2, I No.9.34, P-64) Sqm 1637.7 1637.7 101.08 False None None False None False 165538.716 0 2803843 90177 None PRE15 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturerFeets specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks only). (PWD SR 2023-24, V-2, I No.7.32.1, P-25) Sqm 1041.98 1041.98 74.4 False None None False None False 77523.312 0 2803844 90177 None PRE16 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.25, P-45) Sqm 145.22 145.22 118.908 False None None False None False 17267.81976 0 2803845 90177 None PRE17 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.28, P-45) Sqm 94.34 94.34 211.1772 False None None False None False 19922.457048 0 2803846 90177 None PRE18 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24, V-2, I No.8.40, P-48) Sqm 121.9 121.9 30.096 False None None False None False 3668.7024 0 2803847 90177 None PRE19 Cement Board. (PWD SR 2023-24, V-2, I No.185, P-A-17) Sqm 311.64 311.64 5.76 False None None False None False 1795.0464 0 2803848 90177 None PRE20 Concealed Conduit System Supplying heavygauge PVC conduit pipe..... mm dia....... mm thick confirming toIS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc.,and running before concreting thes lab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures ,run with 18 SWGGI fish wire wherever necessary-25 mm dia 2 mm thick. (PWD EL SR. 2023-24, Vol-6, I No-1.2.2, P No-2) Rmtr 78.0 78.0 70.0 False None None False None False 5460.0 0 2803849 90177 None PRE21 Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall andf ixing by bracing UorJ hooks and cement plastering upto the wall surface and run with18SWGGI fishwire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick. (PWD EL SR. 2023-24, Vol-6, I No-1.3.2, P No-2) Rmtr 79.0 79.0 70.0 False None None False None False 5530.0 0 2803850 90177 None PRE22 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick / Stone/C.C wall. 1-2 Way.(PWD EL SR. 2023-24, Vol-6, I No-3.4.1, P No-8) Each 103.0 103.0 4.0 False None None False None False 412.0 0 2803851 90177 None PRE23 Supplying of..... feet PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than80.Power Input : 220-240V@50/60Hz & Power factor Greater than0.9 along with CE approved.2yearsWarranty against any manufacturing defect working unde rstandard electrical condition. LED light fitting 1 x 2Feet - 9/10 W. (PWD EL SR. 2023-24, Vol-6, I No-11.3.1, P No-43) Each 551.0 551.0 8.0 False None None False None False 4408.0 0 2803852 90177 None PRE24 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model. (PWD EL SR. 2023-24, Vol-6, I No-6.3.1, P No-30) Each 2984.0 2984.0 4.0 False None None False None False 11936.0 0 2803853 90177 None PRE25 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.1, P No-5) Point 269.0 269.0 8.0 False None None False None False 2152.0 0 2803854 90177 None PRE26 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to outlet vias witch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.2, P No-5) Point 379.0 379.0 12.0 False None None False None False 4548.0 0 2803855 90177 None PRE27 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) without control switch shallbe fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto10Mtr from tapping point to outlet via switch box. (PWD EL SR. 2023-24, Vol-6, I No-2.2.3, P No-5) Point 555.0 555.0 8.0 False None None False None False 4440.0 0 2803856 90177 None PRE28 Supplying 6A flush type socket and 6A flush type SP switch either surface / flush mounting in existing gang box or in 4mm thick plastic sheet and fixing overa flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way. (PWD EL SR. 2023-24, Vol-6, I No-3.1.1, P No-8) Each 128.0 128.0 28.0 False None None False None False 3584.0 0 2803857 90177 None PRE29 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (PWD EL SR. 2023-24, Vol-6, I No-3.8, P No-9) Sq CM 0.41 0.41 300.0 False None None False None False 123.0 0 2803858 90177 None PRE30 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBFeets single phase / 3phase/ single door with powder coated painting Made out of 14SWG MS enclosure. II - Double Door-6 Way SP & N (PWD EL SR. 2023-24, Vol-6, I No-5.19.7, P No-18) Each 1791.0 1791.0 4.0 False None None False None False 7164.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1708845499000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1708845499000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1708845499000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1708845551000 0 None None ELIGIBILITY Total value of civil engineering works executed and payments received in the last five years (2018-19 , 2019-20, 2020-21,2021-22 and 2022-23) should not be less than Estimated cost of the work. Turnover certificate must be submitted with UDIN No on it, Failing will be considered as invalid. None 1708845558000 0 None None ELIGIBILITY Bidder can access tender documents from the website, fill them and submit the completed tender document into electronic tender on the website. https://eproc.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder. None 1708845564000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. None 1708845570000 0 None None ELIGIBILITY Self attested copies of the document of all details uploaded to the e-portal in original should be submitted to the executive engineer on the date & time specified above i.e., at the time of bid opening as per notification. None 1708845577000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1708845591000 0 None None ELIGIBILITY It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc. None 1708845611000 0 None None ELIGIBILITY All other conditions and requirements has to be fulfilled as per the standard bid document kw-3. None 1708845617000 0 None None ELIGIBILITY The tenderer should quote his rates With all leads and lifts loading and un loading, including cost of Labour, hire charges of Machinery and other incidental charges etc complete as per the directions of the engineer incharge of the work specifications. None 1708845623000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1708845630000 0 None None ELIGIBILITY The tenderer should maintain the road during the defective liability period - 1YEAR ( maintenance period starts from the date of completion of the work.) None 1708845636000 0 None None ELIGIBILITY All original documents should be submitted in PDF format only. None 1708845642000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing e-procurement portal. None 1708845648000 0 None None ELIGIBILITY The Security Deposit will be released only after satisfactorily completion of defect liability period None 1708845662000 0 None None ELIGIBILITY Time given for the completion of work is 11 months (IMP). None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Satisfactorily completion as a prime contractor for at least one similar work to an extent of 50 percent of the cost of the work , for all works Rs. 46.05 lakhs (Building Workdone). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work.Earthwork Excavation & Construction of embankment : 595.00Cum,PCC/RCC,210.00 Cum,SSM/RSM : 100.00 sqm,BBM :67.00 sqm,Steel : 12.00 MT,Plastering : 967.00 sqm,Flooring : 270.00 sqm) (80% of peak rate of construction) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of existing commitments and ongoing works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Information on work on hand None None None None List of works for which tenders already submitted Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Information on works for which already bid submitted None None None None Constitution/ legal status of Tenderer, Place of Registration , Principal place of business. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- PWD Registration None None None None Achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 93.05 lakhs (Last 5 years 2018-19 to 2022-23) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets or availability of credit facilities of no less than Rs. 28.00 Lakhs Credit lines or letter of credit or certificates from banks for meeting the fund requirement etc. usually 30percent of the amount of contract. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Banker Details for reference Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- BANKERS CONTACT DETAILS None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Statement showing Profit and loss for last five years None None None None List of Financial Resources with Certificates Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- List of Financial Resources with Certificates None None None None Information on works which are yet to be completed. Others Existing commitment createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 5 and Certificates in Format 3 None None None None All the tenderer shall provide the requested Qualification Information accurately and in sufficient details as per formats given in Section 3 of KW-3 Others The details of information should submit in KW-3 prescribed format with relevant documents createdTs version createdDate modifiedDate documentName None None None None Others -- The details of information should submit in KW-3 prescribed format with relevant documents None None None None Information on litigation in which the Tenderer is involved: Others litigation createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 10 None None None None Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded. Others Biodata of the personnel. createdTs version createdDate modifiedDate documentName None None None None Others -- Biodata of the personnel. None None None None The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion. Others PERT/CHART createdTs version createdDate modifiedDate documentName None None None None Others -- CPM/PERT chart with relevant Documents
tenderCriterionDocumentList	documentName optional documentTypeText PWD Company Registration Certificate True Technical Bid Annual Turnover Certificate with compulsory UDIN Number True Technical Bid Single similar nature of work done certificate issued by competent authority, not below the rank of Executive Engineer. True Technical Bid Principal place of business details True Technical Bid Recent tax clearance certificate True Technical Bid Line of credit from nationalised or Scheduled bank with bankers contact details True Technical Bid Ongoing commitment details True Technical Bid Other Kw-3 documents True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1708846864000 version 0 createdDate None modifiedDate None blockNumber O/o Executive Engineer, PRE,Div, Hosapete street None city Hosapete state Karnataka pin 853201
tenderRecallDTO	None