2807914 | 90446 | None | code01 | Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barricading, caution lights,racing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata Hard rock (blasting prohibited) Depth upto 1.50 m | Cum | 1064.7 | 1064.7 | 4887.0 | False | None | None | False | None | False | 5203188.9 | 0 |
2807915 | 90446 | None | code02 | Providing bedding for the pipeline trenches in black cotton and rock
reaches including watering and consolidation by punners etc. complete with all lead and lift with Gravel | Mtr | 383.25 | 383.25 | 3665.25 | False | None | None | False | None | False | 1404707.0625 | 0 |
2807916 | 90446 | None | code03 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating
each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 454.65 | 454.65 | 1221.75 | False | None | None | False | None | False | 555468.6375 | 0 |
2807917 | 90446 | None | code04 | Providing laying Providing jointing materials jointing and testing but excluding excavation and back filling etc for Oriented Poly vinyl chloride Pipes or O PVC Pipes of highest Orientation Class 500 with homogeneous socket during orientation process including supply of Elastomeric sealing ring manufactured and the elastomeric sealing ring gasket conforming to EN 681 The manufacturing testing at factory Providing transpotation handling stacking installation jointing and testing at sites shall comply with all applicable standards etc complete Pipes of 200mm dia and elestromatic fittings | Mtr | 2724.75 | 2724.75 | 2190.0 | False | None | None | False | None | False | 5967202.5 | 0 |
2807918 | 90446 | None | code05 | Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber.Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia - Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. 1.0 M depth & SFRC cover & frame | No | 30499.35 | 30499.35 | 29.0 | False | None | None | False | None | False | 884481.15 | 0 |
2807919 | 90446 | None | code06 | Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber.Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia - Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.5M depth & SFRC cover & frame | No | 40300.05 | 40300.05 | 35.0 | False | None | None | False | None | False | 1410501.75 | 0 |
2807920 | 90446 | None | code07 | Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barricading, caution lights,racing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata Hard rock (blasting prohibited) Depth upto 1.50 m | Cum | 1064.7 | 1064.7 | 53.33 | False | None | None | False | None | False | 56780.451 | 0 |
2807921 | 90446 | None | code08 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 6.22 | False | None | None | False | None | False | 39114.159 | 0 |
2807922 | 90446 | None | code09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. | Cum | 7129.46 | 7129.46 | 17.02 | False | None | None | False | None | False | 121343.4092 | 0 |
2807923 | 90446 | None | code10 | Appendix - I Additionalities for framework,centering-1 For Raft -8% with all lead and lift ,loading &unloading , hire charges of machinery and equipments , transportation charges cost and conveyance of all materials,labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and direction of the Engineer incharge of the work | Cum | 7261.49 | 7261.49 | 29.3 | False | None | None | False | None | False | 212761.657 | 0 |
2807924 | 90446 | None | code11 | Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification | Tonne | 93929.85 | 93929.85 | 5.79 | False | None | None | False | None | False | 543853.8315 | 0 |
2807925 | 90446 | None | code12 | Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading grading to required slope and compacting to meet the requirement complete as per specifications including cost of labour rolling water all materials usage and all other appurtenaces required to complete the work If the height of embankment construction is more than 1.50 m add 5 percent per m3 for every 1.50 m height or part there off | Cum | 521.4 | 521.4 | 1861.89 | False | None | None | False | None | False | 970789.446 | 0 |
2807926 | 90446 | None | code13 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per Design in Double Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per Clause 1101.6, 1000mm Dia | Mtr | 16807.35 | 16807.35 | 15.0 | False | None | None | False | None | False | 252110.25 | 0 |
2807927 | 90446 | None | code14 | RCC Pole 9 Mtr Long 145 Kg WL | No | 7076.0 | 7076.0 | 2.0 | False | None | None | False | None | False | 14152.0 | 0 |
2807928 | 90446 | None | code15 | Labour Charges | No | 1742.0 | 1742.0 | 2.0 | False | None | None | False | None | False | 3484.0 | 0 |
2807929 | 90446 | None | code16 | 11 kV Horizontal Cross Arm with clamps,HTSTsupports, bolts, nuts and washers for RCC Pole 9 Mtr Long 145 Kg WL | Set | 646.0 | 646.0 | 12.0 | False | None | None | False | None | False | 7752.0 | 0 |
2807930 | 90446 | None | code17 | Labour Charges | Set | 272.0 | 272.0 | 12.0 | False | None | None | False | None | False | 3264.0 | 0 |
2807931 | 90446 | None | code18 | 1.1 kV Pin Insulator with GI Pin | No | 66.0 | 66.0 | 30.0 | False | None | None | False | None | False | 1980.0 | 0 |
2807932 | 90446 | None | code19 | 70, 90 kN Disc Insulator | No | 299.0 | 299.0 | 12.0 | False | None | None | False | None | False | 3588.0 | 0 |
2807933 | 90446 | None | code20 | Guy Set Complete with No 15 Strain Insulator | Set | 1170.0 | 1170.0 | 6.0 | False | None | None | False | None | False | 7020.0 | 0 |
2807934 | 90446 | None | code21 | Labour Charges | Set | 593.0 | 593.0 | 6.0 | False | None | None | False | None | False | 3558.0 | 0 |
2807935 | 90446 | None | code22 | Rabbit ACSR Conductor | Km | 46234.0 | 46234.0 | 0.55 | False | None | None | False | None | False | 25428.7 | 0 |
2807936 | 90446 | None | code23 | Labour Charges | Km | 4361.0 | 4361.0 | 0.55 | False | None | None | False | None | False | 2398.55 | 0 |
2807937 | 90446 | None | code24 | Spiral Earth Electrode | No | 239.0 | 239.0 | 2.0 | False | None | None | False | None | False | 478.0 | 0 |
2807938 | 90446 | None | code25 | Labour Charges | No | 93.0 | 93.0 | 2.0 | False | None | None | False | None | False | 186.0 | 0 |
2807939 | 90446 | None | code26 | Labour Charges | No | 4495.0 | 4495.0 | 5.0 | False | None | None | False | None | False | 22475.0 | 0 |
2807940 | 90446 | None | code27 | 4 Pin Cross Arm with clamps, bolts, nuts and washers for guarding | Set | 420.0 | 420.0 | 5.0 | False | None | None | False | None | False | 2100.0 | 0 |
2807941 | 90446 | None | code28 | Labour Charges | Set | 160.0 | 160.0 | 5.0 | False | None | None | False | None | False | 800.0 | 0 |
2807942 | 90446 | None | code29 | Road Guarding | Set | 1960.0 | 1960.0 | 7.0 | False | None | None | False | None | False | 13720.0 | 0 |
2807943 | 90446 | None | code30 | Labour Charges | Set | 726.0 | 726.0 | 7.0 | False | None | None | False | None | False | 5082.0 | 0 |
2807944 | 90446 | None | code31 | DP Transformer Structure using RCC Pole 9 Mtr Long 145 Kg WL | No | 31544.0 | 31544.0 | 5.0 | False | None | None | False | None | False | 157720.0 | 0 |
2807945 | 90446 | None | code32 | Labour Charges | No | 6983.0 | 6983.0 | 5.0 | False | None | None | False | None | False | 34915.0 | 0 |
2807946 | 90446 | None | code33 | 11 KV 5 KN Polymeric Pin Insulator 24 mm Dia FRP Rod | No | 205.0 | 205.0 | 15.0 | False | None | None | False | None | False | 3075.0 | 0 |
2807947 | 90446 | None | code34 | 70/90 kN Disc Insulator | No | 299.0 | 299.0 | 15.0 | False | None | None | False | None | False | 4485.0 | 0 |
2807948 | 90446 | None | code35 | Guy Set Complete with No 15 Strain Insulator | Set | 1170.0 | 1170.0 | 20.0 | False | None | None | False | None | False | 23400.0 | 0 |
2807949 | 90446 | None | code36 | Labour Charges | Set | 593.0 | 593.0 | 20.0 | False | None | None | False | None | False | 11860.0 | 0 |
2807950 | 90446 | None | code37 | 11kV/433V 100 kVA 3 Phase 50 Cys Distribution Transformer BEE 5 Star Rated with Oil | No | 221952.0 | 221952.0 | 5.0 | False | None | None | False | None | False | 1109760.0 | 0 |
2807951 | 90446 | None | code38 | Labour Charges | No | 1590.0 | 1590.0 | 5.0 | False | None | None | False | None | False | 7950.0 | 0 |
2807952 | 90446 | None | code39 | Earthing materials pipe type for grounding Single Electrode with accessories | No | 1729.0 | 1729.0 | 20.0 | False | None | None | False | None | False | 34580.0 | 0 |
2807953 | 90446 | None | code40 | Labour Charges | No | 949.0 | 949.0 | 20.0 | False | None | None | False | None | False | 18980.0 | 0 |
2807954 | 90446 | None | code41 | Guy concreting with Boulders, Mud and Sand | No | 200.0 | 200.0 | 20.0 | False | None | None | False | None | False | 4000.0 | 0 |
2807955 | 90446 | None | code42 | Labour Charges | No | 987.0 | 987.0 | 20.0 | False | None | None | False | None | False | 19740.0 | 0 |
2807956 | 90446 | None | code43 | GI Wire 8 SWG | Kg | 75.04 | 75.04 | 30.0 | False | None | None | False | None | False | 2251.2 | 0 |
2807957 | 90446 | None | code44 | Guy wire 7/10 SWG | Kg | 77.23 | 77.23 | 60.0 | False | None | None | False | None | False | 4633.8 | 0 |
2807958 | 90446 | None | code45 | 11 kV Lightning Arrester Metal Oxide 10 kV 5 kA Polymetic Type with ground disconnector | Set | 4785.0 | 4785.0 | 5.0 | False | None | None | False | None | False | 23925.0 | 0 |
2807959 | 90446 | None | code46 | Labour Charges | Set | 119.0 | 119.0 | 5.0 | False | None | None | False | None | False | 595.0 | 0 |
2807960 | 90446 | None | code47 | LT Protection Kit for 100 kVA | No | 2023.0 | 2023.0 | 10.0 | False | None | None | False | None | False | 20230.0 | 0 |
2807961 | 90446 | None | code48 | Labour Charges | No | 356.0 | 356.0 | 10.0 | False | None | None | False | None | False | 3560.0 | 0 |
2807962 | 90446 | None | code49 | LT Wiring From DTC to LT Line Through Metering Box & LT Protection Kit SINGLE CIRCUIT | No | 22686.0 | 22686.0 | 10.0 | False | None | None | False | None | False | 226860.0 | 0 |
2807963 | 90446 | None | code50 | Labour Charges | No | 920.0 | 920.0 | 10.0 | False | None | None | False | None | False | 9200.0 | 0 |
2807964 | 90446 | None | code51 | Al Lead Wire 240 Sqmm | Mtr | 260.37 | 260.37 | 650.0 | False | None | None | False | None | False | 169240.5 | 0 |
2807965 | 90446 | None | code52 | Heavy Duty Long Barrel Copper Lug 240 Sqmm | No | 355.0 | 355.0 | 80.0 | False | None | None | False | None | False | 28400.0 | 0 |
2807966 | 90446 | None | code53 | Labour Charges | No | 30.8 | 30.8 | 80.0 | False | None | None | False | None | False | 2464.0 | 0 |
2807967 | 90446 | None | code54 | PG Clamp Rabbit to 240 Sqmm | No | 410.0 | 410.0 | 25.0 | False | None | None | False | None | False | 10250.0 | 0 |
2807968 | 90446 | None | code55 | Spacer for DTC Wiring | No | 42.0 | 42.0 | 60.0 | False | None | None | False | None | False | 2520.0 | 0 |
2807969 | 90446 | None | code56 | Fish Plate with necessary Clamps bolts & nuts etc complete Galvanised | No | 264.0 | 264.0 | 20.0 | False | None | None | False | None | False | 5280.0 | 0 |
2807970 | 90446 | None | code57 | LT Metering box with CTs and necessary wiring for housing ETV Meter Please see CDS 39 | No | 5393.0 | 5393.0 | 5.0 | False | None | None | False | None | False | 26965.0 | 0 |
2807971 | 90446 | None | code58 | Labour Charges | No | 865.0 | 865.0 | 5.0 | False | None | None | False | None | False | 4325.0 | 0 |
2807972 | 90446 | None | code59 | LT Electronic TriVector Meter 5 Amps 0.5/1.0 Accuracy Class | No | 3396.0 | 3396.0 | 5.0 | False | None | None | False | None | False | 16980.0 | 0 |
2807973 | 90446 | None | code60 | Labour Charges | No | 480.0 | 480.0 | 5.0 | False | None | None | False | None | False | 2400.0 | 0 |
2807974 | 90446 | None | code61 | 11 kV Solid Core Type HG Fuse Unit | No | 1069.0 | 1069.0 | 5.0 | False | None | None | False | None | False | 5345.0 | 0 |
2807975 | 90446 | None | code62 | Labour Charges | No | 237.0 | 237.0 | 5.0 | False | None | None | False | None | False | 1185.0 | 0 |
2807976 | 90446 | None | code63 | 11 kV 200 Amps Single Break GOS | No | 9450.0 | 9450.0 | 5.0 | False | None | None | False | None | False | 47250.0 | 0 |
2807977 | 90446 | None | code64 | Labour Charges | No | 1104.0 | 1104.0 | 5.0 | False | None | None | False | None | False | 5520.0 | 0 |
2807978 | 90446 | None | code65 | H Frame for mounting GOS | No | 4332.0 | 4332.0 | 5.0 | False | None | None | False | None | False | 21660.0 | 0 |
2807979 | 90446 | None | code66 | Labour Charges | No | 323.0 | 323.0 | 5.0 | False | None | None | False | None | False | 1615.0 | 0 |
2807980 | 90446 | None | code67 | Caution/Danger Board | No | 150.0 | 150.0 | 5.0 | False | None | None | False | None | False | 750.0 | 0 |
2807981 | 90446 | None | code68 | Labour Charges | No | 80.0 | 80.0 | 5.0 | False | None | None | False | None | False | 400.0 | 0 |
2807982 | 90446 | None | code69 | Anti Climbing Device 12 Mtr GI Barbed Wire | Kg | 89.0 | 89.0 | 5.0 | False | None | None | False | None | False | 445.0 | 0 |
2807983 | 90446 | None | code70 | Labour Charges | No | 42.0 | 42.0 | 5.0 | False | None | None | False | None | False | 210.0 | 0 |
2807984 | 90446 | None | code71 | Labour Charges | No | 4495.0 | 4495.0 | 10.0 | False | None | None | False | None | False | 44950.0 | 0 |
2807985 | 90446 | None | code72 | Labour Charges | No | 250.0 | 250.0 | 20.0 | False | None | None | False | None | False | 5000.0 | 0 |
2807986 | 90446 | None | code73 | Labour Charges | Sqm | 987.0 | 987.0 | 150.0 | False | None | None | False | None | False | 148050.0 | 0 |
2807987 | 90446 | None | code74 | RCC Pole 9 Mtr Long 145 Kg WL | No | 7076.0 | 7076.0 | 10.0 | False | None | None | False | None | False | 70760.0 | 0 |
2807988 | 90446 | None | code75 | Labour Charges | No | 1742.0 | 1742.0 | 10.0 | False | None | None | False | None | False | 17420.0 | 0 |
2807989 | 90446 | None | code76 | PSCC Pole 9 Mtr Long 200 Kg WL for Intermediate Pole | No | 4199.0 | 4199.0 | 25.0 | False | None | None | False | None | False | 104975.0 | 0 |
2807990 | 90446 | None | code77 | Labour Charges | No | 1742.0 | 1742.0 | 25.0 | False | None | None | False | None | False | 43550.0 | 0 |
2807991 | 90446 | None | code78 | 4 Pin Cross Arm | No | 423.0 | 423.0 | 48.0 | False | None | None | False | None | False | 20304.0 | 0 |
2807992 | 90446 | None | code79 | Labour Charges | No | 160.0 | 160.0 | 48.0 | False | None | None | False | None | False | 7680.0 | 0 |
2807993 | 90446 | None | code80 | LT Single Top Support with bolts nuts and washers | No | 140.0 | 140.0 | 48.0 | False | None | None | False | None | False | 6720.0 | 0 |
2807994 | 90446 | None | code81 | Labour Charges | No | 112.0 | 112.0 | 48.0 | False | None | None | False | None | False | 5376.0 | 0 |
2807995 | 90446 | None | code82 | 1.1 kV Pin Insulator with GI Pin | No | 66.0 | 66.0 | 155.0 | False | None | None | False | None | False | 10230.0 | 0 |
2807996 | 90446 | None | code83 | No 8 Strain Insulator | No | 27.0 | 27.0 | 90.0 | False | None | None | False | None | False | 2430.0 | 0 |
2807997 | 90446 | None | code84 | Rabbit ACSR Conductor | Km | 46234.0 | 46234.0 | 6.1 | False | None | None | False | None | False | 282027.4 | 0 |
2807998 | 90446 | None | code85 | Labour Charges | Km | 4361.0 | 4361.0 | 6.1 | False | None | None | False | None | False | 26602.1 | 0 |
2807999 | 90446 | None | code86 | Spiral Earth Electrode | No | 239.0 | 239.0 | 35.0 | False | None | None | False | None | False | 8365.0 | 0 |
2808000 | 90446 | None | code87 | Labour Charges | No | 93.0 | 93.0 | 35.0 | False | None | None | False | None | False | 3255.0 | 0 |
2808001 | 90446 | None | code88 | PSCC Pole 8 Mtr Long For Stud | No | 3699.0 | 3699.0 | 10.0 | False | None | None | False | None | False | 36990.0 | 0 |
2808002 | 90446 | None | code89 | Labour Charges | No | 1425.0 | 1425.0 | 10.0 | False | None | None | False | None | False | 14250.0 | 0 |
2808003 | 90446 | None | code90 | LT 2 Pin Cross Arm with clamps, bolts nuts for PSCC Pole 9 Mtr Long 200 Kg WL | Set | 263.0 | 263.0 | 20.0 | False | None | None | False | None | False | 5260.0 | 0 |
2808004 | 90446 | None | code91 | Labour Charges | Set | 160.0 | 160.0 | 20.0 | False | None | None | False | None | False | 3200.0 | 0 |
2808005 | 90446 | None | code92 | Road Guarding | No | 1960.0 | 1960.0 | 5.0 | False | None | None | False | None | False | 9800.0 | 0 |
2808006 | 90446 | None | code93 | Labour Charges | No | 726.0 | 726.0 | 5.0 | False | None | None | False | None | False | 3630.0 | 0 |
2808007 | 90446 | None | code94 | Cross Arm with clamps bolts nuts and washers for guarding | No | 420.0 | 420.0 | 10.0 | False | None | None | False | None | False | 4200.0 | 0 |
2808008 | 90446 | None | code95 | Labour Charges | No | 160.0 | 160.0 | 10.0 | False | None | None | False | None | False | 1600.0 | 0 |
2808009 | 90446 | None | code96 | Labour Charges | No | 3434.0 | 3434.0 | 35.0 | False | None | None | False | None | False | 120190.0 | 0 |
2808010 | 90446 | None | code97 | Labour Charges | No | 3434.0 | 3434.0 | 10.0 | False | None | None | False | None | False | 34340.0 | 0 |