createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1707118939224 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 444000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 14-03-2024 17:00:00 tenderQueryClose 07-03-2024 17:00:00 technicalBidOpen 15-03-2024 17:02:03 publishedDate 24-02-2024 13:12:46 publishedByPost CMC_MCOM_UDP publishedByUser KPE15327 - RAYAPPA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 28-02-2024 17:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson yashwantha prabhu splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9743412642 tenderSupplierList None
tenderSchedule	createdTs 1707118939253 version 6 createdDate None modifiedDate None tenderNumber DMA/2023-24/BD/WORK_INDENT11982 title Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District. description Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District. category WORKS categoryText Works ecv 35000000.00 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2411 locationName DMA City Municipal Council Udupi provisionalAmount 35000000.0 groupOverheadTotal 5481842.17 fileNumber UCMC/CR/B2/CR/01/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(BUILDING WORK) 25307791.92 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2439854 73427 None code01 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.-By Mechanical Means using Dozer-In area of thorny jungle ha 188816.32 188816.32 0.22 False None None False None False 41539.5904 0 2439855 73427 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Cum 81.76 81.76 1777.18 False None None False None False 145302.2368 0 2439856 73427 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work- In ordinary/soft rock without blasting- Depth exceeding 3m, but not exceeding 4.5m Cum 390.88 390.88 1184.79 False None None False None False 463110.7152 0 2439857 73427 None code04 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/Sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications Sqm 106.4 106.4 680.5 False None None False None False 72405.2 0 2439858 73427 None code05 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse Cum 5830.72 5830.72 48.97 False None None False None False 285530.3584 0 2439859 73427 None code06 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-SQM5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7232.2 7232.2 138.24 False None None False None False 999779.328 0 2439860 73427 None code07 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-SQM5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7232.2 7232.2 11.88 False None None False None False 85918.536 0 2439861 73427 None code08 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--SQM5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 10392.48 10392.48 15.14 False None None False None False 157342.1472 0 2439862 73427 None code09 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other---- M30 Design Mix Using 20 mm nominal size graded crushed coarse Cum 7382.14 7382.14 156.78 False None None False None False 1157371.9092 0 2439863 73427 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 228.48 228.48 956.06 False None None False None False 218440.5888 0 2439864 73427 None code11 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 450.24 450.24 172.89 False None None False None False 77841.9936 0 2439865 73427 None code12 providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5994.24 5994.24 12.78 False None None False None False 76606.3872 0 2439866 73427 None code13 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse Cum 6415.36 6415.36 0.96 False None None False None False 6158.7456 0 2439867 73427 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--SQM5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11778.14 11778.14 13.35 False None None False None False 157238.169 0 2439868 73427 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--SQM5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11895.93 11895.93 13.35 False None None False None False 158810.6655 0 2439869 73427 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--SQM5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR Cum 12013.71 12013.71 1.24 False None None False None False 14897.0004 0 2439870 73427 None code17 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 11342.36 11342.36 4.04 False None None False None False 45823.1344 0 2439871 73427 None code18 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11085.31 11085.31 24.63 False None None False None False 273031.1853 0 2439872 73427 None code19 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11196.17 11196.17 24.63 False None None False None False 275761.6671 0 2439873 73427 None code20 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12241.04 12241.04 2.14 False None None False None False 26195.8256 0 2439874 73427 None code21 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11085.31 11085.31 0.66 False None None False None False 7316.3046 0 2439875 73427 None code22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11196.17 11196.17 7.97 False None None False None False 89233.4749 0 2439876 73427 None code23 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11307.02 11307.02 0.66 False None None False None False 7462.6332 0 2439877 73427 None code24 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse Cum 10264.58 10264.58 0.33 False None None False None False 3387.3114 0 2439878 73427 None code25 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse Cum 10367.22 10367.22 2.84 False None None False None False 29442.9048 0 2439879 73427 None code26 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse Cum 10469.87 10469.87 0.33 False None None False None False 3455.0571 0 2439880 73427 None code27 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (BASEMENT FLOOR Cum 10392.48 10392.48 18.0 False None None False None False 187064.64 0 2439881 73427 None code28 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (GROUND FLOOR Cum 10496.4 10496.4 4.29 False None None False None False 45029.556 0 2439882 73427 None code29 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S 3620/1979 having compressive strength not less than 3.5 N/mSqm for saturated dry samples-For super structure in CM 1:6. ITEM-6.37, volume-2, (1st addenda for vol.1,2 & 3 schedule of rates w.e.f 21-04-2022.) BASEMENT FLOOR Cum 6611.36 6611.36 8.57 False None None False None False 56659.3552 0 2439883 73427 None code30 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S 3620/1979 having compressive strength not less than 3.5 N/mSqm for saturated dry samples-For super structure in CM 1:6. ITEM-6.37, volume-2, (1st addenda for vol.1,2 & 3 schedule of rates w.e.f 21-04-2022.) GROUND FLOOR Cum 6677.47 6677.47 104.91 False None None False None False 700533.3777 0 2439884 73427 None code31 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S 3620/1979 having compressive strength not less than 3.5 N/mSqm for saturated dry samples-For super structure in CM 1:6. ITEM-6.37, volume-2, (1st addenda for vol.1,2 & 3 schedule of rates w.e.f 21-04-2022.) HEAD ROOM Cum 6743.59 6743.59 8.44 False None None False None False 56915.8996 0 2439885 73427 None code32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications GROUND FLOOR Sqm 1339.52 1339.52 36.66 False None None False None False 49106.8032 0 2439886 73427 None code33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. BASEMENT FLOOR Sqm 1188.32 1188.32 65.43 False None None False None False 77751.7776 0 2439887 73427 None code34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GROUND FLOOR Sqm 1200.2 1200.2 120.43 False None None False None False 144540.086 0 2439888 73427 None code35 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SECOND FLOOR Sqm 1212.09 1212.09 118.56 False None None False None False 143705.3904 0 2439889 73427 None code36 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. BASEMENT FLOOR Sqm 1052.8 1052.8 8.4 False None None False None False 8843.52 0 2439890 73427 None code37 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GROUND FLOOR Sqm 1063.33 1063.33 48.72 False None None False None False 51805.4376 0 2439891 73427 None code38 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 50% ON CONCRETE ITEM) BASEMENT FLOOR Cum 10392.48 10392.48 67.88 False None None False None False 705441.5424 0 2439892 73427 None code39 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 50% ON CONCRETE ITEM) GROUND FLOOR Cum 10496.4 10496.4 67.88 False None None False None False 712495.632 0 2439893 73427 None code40 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 50% ON CONCRETE ITEM) TERRACE FLOOR Cum 10600.33 10600.33 2.25 False None None False None False 23850.7425 0 2439894 73427 None code41 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 103.04 103.04 37020.13 False None None False None False 3814554.1952 0 2439895 73427 None code42 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)BASEMENT FLOOR Kg 103.04 103.04 19990.83 False None None False None False 2059855.1232 0 2439896 73427 None code43 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) GROUND FLOOR Kg 104.07 104.07 19100.4 False None None False None False 1987778.628 0 2439897 73427 None code45 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. GROUND FLOOR Cum 69685.31 69685.31 0.18 False None None False None False 12543.3558 0 2439898 73427 None code46 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. TERRACE FLOOR Cum 70375.27 70375.27 0.09 False None None False None False 6333.7743 0 2439899 73427 None code48 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross section 90mmx 45mm having single rebate of 32mm x 15mm to recive shutter of 30mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S stay shall be provided at the bottom to steady the frame. GROUND FLOOR Rmtr 713.79 713.79 25.6 False None None False None False 18273.024 0 2439900 73427 None code49 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. BASEMENT FLOOR Sqm 2811.2 2811.2 15.0 False None None False None False 42168.0 0 2439901 73427 None code50 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.GROUND FLOOR Sqm 2839.31 2839.31 126.75 False None None False None False 359882.5425 0 2439902 73427 None code51 Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. BASEMENT FLOOR Sqm 1105.44 1105.44 15.0 False None None False None False 16581.6 0 2439903 73427 None code52 Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-ChargeGROUND FLOOR Sqm 1116.49 1116.49 126.75 False None None False None False 141515.1075 0 2439904 73427 None code53 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. BASEMENT FLOOR Sqm 7350.56 7350.56 12.5 False None None False None False 91882.0 0 2439905 73427 None code54 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GROUND FLOOR Sqm 7424.07 7424.07 15.0 False None None False None False 111361.05 0 2439906 73427 None code55 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8108.8 8108.8 1.82 False None None False None False 14758.016 0 2439907 73427 None code56 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GROUND FLOOR Sqm 7180.32 7180.32 1.0 False None None False None False 7180.32 0 2439908 73427 None code57 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FIRST FLOOR Sqm 7252.12 7252.12 2.16 False None None False None False 15664.5792 0 2439909 73427 None code58 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) BASEMENT FLOOR Sqm 5454.4 5454.4 0.18 False None None False None False 981.792 0 2439910 73427 None code59 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)GROUND FLOOR Sqm 5508.94 5508.94 30.67 False None None False None False 168959.1898 0 2439911 73427 None code61 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick one side teak and one side commercial GROUND FLOOR Sqm 3896.98 3896.98 5.16 False None None False None False 20108.4168 0 2439912 73427 None code62 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick one side teak and one side commercial FIRST FLOOR Sqm 3935.57 3935.57 2.58 False None None False None False 10153.7706 0 2439913 73427 None code64 Providing and fixing to existing door frames. 30mm thick Glass fiber reinforced plastic (FRP) pannelled door shutter of requirred colour and approved brand and manufacture, made with fre-retardant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to IS: 14856, including fixing to frames. GROUND FLOOR Sqm 3535.0 3535.0 6.45 False None None False None False 22800.75 0 2439914 73427 None code65 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding BASEMENT FLOOR Kg 162.4 162.4 32.04 False None None False None False 5203.296 0 2439915 73427 None code66 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GROUND FLOOR Kg 164.02 164.02 820.8 False None None False None False 134627.616 0 2439916 73427 None code67 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. GROUND & FIRST FLOOR No 1658.72 1658.72 1.0 False None None False None False 1658.72 0 2439917 73427 None code68 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 122.08 122.08 2.0 False None None False None False 244.16 0 2439918 73427 None code69 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete. No. 196.0 196.0 4.0 False None None False None False 784.0 0 2439919 73427 None code70 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm, Each 377.44 377.44 4.0 False None None False None False 1509.76 0 2439920 73427 None code71 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5mm.(heavy type) No. 225.12 225.12 10.0 False None None False None False 2251.2 0 2439921 73427 None code72 Providing and fixing MS Hold fasts Each 35.84 35.84 12.0 False None None False None False 430.08 0 2439922 73427 None code73 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. No 52.64 52.64 2.0 False None None False None False 105.28 0 2439923 73427 None code74 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete BASEMENT FLOOR Sqm 306.88 306.88 945.04 False None None False None False 290013.8752 0 2439924 73427 None code75 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete GROUND FLOOR Sqm 309.95 309.95 705.45 False None None False None False 218654.2275 0 2439925 73427 None code76 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete TERRACE FLOOR Sqm 313.02 313.02 24.0 False None None False None False 7512.48 0 2439926 73427 None code77 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. BASEMENT FLOOR Sqm 348.32 348.32 664.98 False None None False None False 231625.8336 0 2439927 73427 None code78 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR Sqm 351.8 351.8 1281.4 False None None False None False 450796.52 0 2439928 73427 None code79 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FIRST FLOOR Sqm 355.29 355.29 62.7 False None None False None False 22276.683 0 2439929 73427 None code80 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. BASEMENT FLOOR Sqm 277.76 277.76 1.0 False None None False None False 277.76 0 2439930 73427 None code81 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR Sqm 280.54 280.54 203.64 False None None False None False 57129.1656 0 2439931 73427 None code82 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. BASEMENT FLOOR Sqm 360.64 360.64 225.4 False None None False None False 81288.256 0 2439932 73427 None code83 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR Sqm 364.25 364.25 359.8 False None None False None False 131057.15 0 2439933 73427 None code84 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. TERRACE FLOOR Sqm 367.85 367.85 269.85 False None None False None False 99264.3225 0 2439934 73427 None code85 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. BASEMENT FLOOR Kg 57.12 57.12 338.1 False None None False None False 19312.272 0 2439935 73427 None code86 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. GROUND FLOOR Kg 57.69 57.69 179.9 False None None False None False 10378.431 0 2439936 73427 None code87 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. FIRST FLOOR Kg 58.26 58.26 134.93 False None None False None False 7861.0218 0 2439937 73427 None code88 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse Cum 6415.36 6415.36 88.0 False None None False None False 564551.68 0 2439938 73427 None code89 Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3 , coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing BASEMENT FLOOR Cum 10040.8 10040.8 98.4 False None None False None False 988014.72 0 2439939 73427 None code90 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per Sqm to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per Sqm and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. TERRACE FLOOR Sqm 867.78 867.78 576.0 False None None False None False 499841.28 0 2439940 73427 None code91 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete TERRACE FLOOR Sqm 319.16 319.16 576.0 False None None False None False 183836.16 0 2439941 73427 None code92 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 653.86 653.86 332.08 False None None False None False 217133.8288 0 2439942 73427 None code93 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top co Sqm 428.06 428.06 16.53 False None None False None False 7075.8318 0 2439943 73427 None code94 Gutter (600 mm over all girth) Rmtr 1005.48 1005.48 55.1 False None None False None False 55401.948 0 2439944 73427 None code96 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 159.94 159.94 1992.49 False None None False None False 318678.8506 0 2439945 73427 None code97 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. BASEMENT FLOOR Sqm 3214.4 3214.4 355.98 False None None False None False 1144262.112 0 2439946 73427 None code98 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. GROUND FLOOR Sqm 3246.54 3246.54 256.61 False None None False None False 833094.6294 0 2439947 73427 None code99 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete.-- Size of Tile 800x800 mm BASEMENT FLOOR Sqm 1554.56 1554.56 19.16 False None None False None False 29785.3696 0 2439948 73427 None code100 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete.-- Size of Tile 800x800 mm GROUND FLOOR Sqm 1570.11 1570.11 202.87 False None None False None False 318528.2157 0 2439949 73427 None code101 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete.-- Size of Tile 800x800 mmTERRACE FLOOR Sqm 1585.65 1585.65 10.2 False None None False None False 16173.63 0 2439950 73427 None code102 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete BASEMENT FLOOR Sqm 853.44 853.44 3.75 False None None False None False 3200.4 0 2439951 73427 None code103 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete GROUND FLOOR Sqm 861.97 861.97 130.06 False None None False None False 112107.8182 0 2439952 73427 None code104 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. BASEMENT FLOOR Sqm 1079.68 1079.68 2.25 False None None False None False 2429.28 0 2439953 73427 None code105 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. GOUND FLOOR Sqm 1090.48 1090.48 155.12 False None None False None False 169155.2576 0 2439954 73427 None code106 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications BASEMENT FLOOR Sqm 1382.08 1382.08 5.13 False None None False None False 7090.0704 0 2439955 73427 None code107 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications GROUND FLOOR Sqm 1395.9 1395.9 2.57 False None None False None False 3587.463 0 2439956 73427 None code108 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. BASEMENT FLOOR Sqm 2647.68 2647.68 1.2 False None None False None False 3177.216 0 2439957 73427 None code109 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. GROUND FLOOR Sqm 2674.16 2674.16 2.4 False None None False None False 6417.984 0 2439958 73427 None code110 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. BASEMENT FLOOR Sqm 92.96 92.96 1610.02 False None None False None False 149667.4592 0 2439959 73427 None code111 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GROUND FLOOR Sqm 93.89 93.89 1986.85 False None None False None False 186545.3465 0 2439960 73427 None code112 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. TERRACE FLOOR Sqm 94.82 94.82 86.7 False None None False None False 8220.894 0 2439961 73427 None code113 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. BASEMENT FLOOR Sqm 132.16 132.16 945.04 False None None False None False 124896.4864 0 2439962 73427 None code114 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.GROUND FLOOR Sqm 133.48 133.48 705.45 False None None False None False 94163.466 0 2439963 73427 None code115 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.TERRACE FLOOR Sqm 134.8 134.8 24.0 False None None False None False 3235.2 0 2439964 73427 None code116 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.BASEMENT FLOOR Sqm 132.16 132.16 664.98 False None None False None False 87883.7568 0 2439965 73427 None code117 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.GROUND FLOOR Sqm 133.48 133.48 1281.4 False None None False None False 171041.272 0 2439966 73427 None code118 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.TERRACE FLOOR Sqm 134.8 134.8 62.7 False None None False None False 8451.96 0 2439967 73427 None code119 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. BASEMENT FLOOR Sqm 152.32 152.32 225.4 False None None False None False 34332.928 0 2439968 73427 None code120 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR Sqm 153.84 153.84 359.8 False None None False None False 55351.632 0 2439969 73427 None code121 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. TERRACE FLOOR Sqm 155.37 155.37 269.85 False None None False None False 41926.5945 0 2439970 73427 None code122 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. BASEMENT FLOOR Sqm 232.96 232.96 22.54 False None None False None False 5250.9184 0 2439971 73427 None code123 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GROUND FLOOR Sqm 235.29 235.29 35.98 False None None False None False 8465.7342 0 2439972 73427 None code124 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.TERRACE FLOOR Sqm 237.62 237.62 53.97 False None None False None False 12824.3514 0 2439973 73427 None code125 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.BASEMENT FLOOR Sqm 145.6 145.6 2.4 False None None False None False 349.44 0 2439974 73427 None code126 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.GROUND FLOOR Sqm 147.06 147.06 437.9 False None None False None False 64397.574 0 2439975 73427 None code133 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.BASEMENT FLOOR Kg 560.0 560.0 60.8 False None None False None False 34048.0 0 2439976 73427 None code134 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GROUND FLOOR Kg 565.6 565.6 262.24 False None None False None False 148322.944 0 2439977 73427 None code135 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 110mm dia., 6 kg/sqcm & class 3 Rmtr 441.28 441.28 100.0 False None None False None False 44128.0 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(PLUMBING AND SANITARY WORK) 440583.74 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2439978 73428 None code01 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 g/Sqm,made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing Sqm 1749.44 1749.44 46.0 False None None False None False 80474.24 0 2439979 73428 None code02 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required-White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests No 4755.52 4755.52 2.0 False None None False None False 9511.04 0 2439980 73428 None code03 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid No 5605.6 5605.6 2.0 False None None False None False 11211.2 0 2439981 73428 None code04 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and Each 7423.36 7423.36 2.0 False None None False None False 14846.72 0 2439982 73428 None code05 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer No 4030.88 4030.88 4.0 False None None False None False 16123.52 0 2439983 73428 None code06 Providing and fixing 100 mm sand cast Iron grating for gully trap. No 229.6 229.6 10.0 False None None False None False 2296.0 0 2439984 73428 None code07 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 646.24 646.24 15.0 False None None False None False 9693.6 0 2439985 73428 None code08 Providing and fixing C.P. brass long Noe bib cock of approved quality conforming to IS standards and weighing not less than 810 g. No 754.88 754.88 10.0 False None None False None False 7548.8 0 2439986 73428 None code09 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore No 591.36 591.36 2.0 False None None False None False 1182.72 0 2439987 73428 None code10 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore No 646.24 646.24 2.0 False None None False None False 1292.48 0 2439988 73428 None code11 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm nominal bore No 762.72 762.72 2.0 False None None False None False 1525.44 0 2439989 73428 None code12 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 50 mm nominal bore No 934.08 934.08 2.0 False None None False None False 1868.16 0 2439990 73428 None code13 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 65 mm nominal bore No 1556.8 1556.8 2.0 False None None False None False 3113.6 0 2439991 73428 None code14 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 80 mm nominal bore No 2302.72 2302.72 2.0 False None None False None False 4605.44 0 2439992 73428 None code15 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1087.52 1087.52 2.0 False None None False None False 2175.04 0 2439993 73428 None code16 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. No 425.6 425.6 2.0 False None None False None False 851.2 0 2439994 73428 None code17 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 160mm dia., 6 kg/sqcm & class 3-(basic rate 599- 7%) Rmtr 623.92 623.92 40.0 False None None False None False 24956.8 0 2439995 73428 None code18 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 110mm dia., 6 kg/sqcm & class 3-(basic rate 394- 7%) Rmtr 415.6 415.6 30.0 False None None False None False 12468.0 0 2439996 73428 None code19 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 90mm dia.,6kg/sqcm & class 3 (basic rate 281-7%) Rmtr 292.69 292.69 110.0 False None None False None False 32195.9 0 2439997 73428 None code20 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 50 mm dia Rmtr 859.04 859.04 60.0 False None None False None False 51542.4 0 2439998 73428 None code21 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 32 mm dia Rmtr 440.16 440.16 40.0 False None None False None False 17606.4 0 2439999 73428 None code22 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 25 mm dia Rmtr 353.92 353.92 30.0 False None None False None False 10617.6 0 2440000 73428 None code23 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 20 mm dia No 267.68 267.68 80.0 False None None False None False 21414.4 0 2440001 73428 None code24 Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the PE Inspection chambres with lid consisting of inlet & outlet arrangements with base, riser of min. 0.42 m depth which includes earth work, fixing in CC-1:2:4 with appurtenances., complete. (c) civil works like Earthwork excavation for the pipeline trenches for laying of PVC-U pipes for the house connections in all types of soils , disintegrated rock,soft rock, hard rock, including cutting of any road using , crossing drains, compound, Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, c.c. wood work, steel work, including T & P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable and stacking the serviceable material with all lifts and lead , restoring the damaged portions inside or outside the property premises, refilling the portions of trenches that are dug open including linking to existing sewer network with appurtenances. complete.Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with all lead No 8761.76 8761.76 6.0 False None None False None False 52570.56 0 2440002 73428 None code25 KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM and testing complete as per specifications. Ltr 8.96 8.96 2000.0 False None None False None False 17920.0 0 2440003 73428 None code26 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP-3.00 HP - 155 LPM @ 42 m = 3 STG Outlet Dia - 2.00” Each 30972.48 30972.48 1.0 False None None False None False 30972.48 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(ELECTRIFICATION WORK) 1939284.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440004 73429 None code01 INTERNAL WIRING & POWER POINTS PVC Conduit and its Accessories Concealed Conduit System Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory 19/20mm Dia 2mm Thick Rmtr 61.0 61.0 275.0 False None None False None False 16775.0 0 2440005 73429 None code02 INTERNAL WIRING & POWER POINTS PVC Conduit and its Accessories Concealed Conduit System Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory 25mm dia 2mm Thick Rmtr 70.0 70.0 385.0 False None None False None False 26950.0 0 2440006 73429 None code03 INTERNAL WIRING & POWER POINTS PVC Conduit and its Accessories Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory 19/20mm Dia 2mm Thick Rmtr 75.0 75.0 1276.0 False None None False None False 95700.0 0 2440007 73429 None code04 INTERNAL WIRING & POWER POINTS PVC Conduit and its Accessories Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory 25mm dia 2mm Thick Rmtr 80.0 80.0 3190.0 False None None False None False 255200.0 0 2440008 73429 None code05 INTERNAL WIRING & POWER POINTS PVC Conduit and its Accessories Supplying and fixing PVC/ Metal Conduit Deep Junction Boxes 25 mm Deep Junction Box Each 51.0 51.0 172.0 False None None False None False 8772.0 0 2440009 73429 None code06 INTERNAL WIRING & POWER POINTS Supply & Fixing of Metal fan box with round Hook Each 163.0 163.0 75.0 False None None False None False 12225.0 0 2440010 73429 None code07 INTERNAL WIRING & POWER POINTS Wires & Cables Point wiring using copper wire without Switch Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet. Make : KEI / Polycab/ FiNolex Short point upto 3 Mts. From Tapping point to outlet via switch box. Point 251.0 251.0 66.0 False None None False None False 16566.0 0 2440011 73429 None code08 INTERNAL WIRING & POWER POINTS Wires & Cables Point wiring using copper wire without Switch Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet. Make : KEI / Polycab/ FiNolex Medium point above 3 Mts upto 6 Mts. From tapping point to outlet via switch box. Point 361.0 361.0 106.0 False None None False None False 38266.0 0 2440012 73429 None code09 INTERNAL WIRING & POWER POINTS Wires & Cables Point wiring using copper wire without Switch Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet. Make : KEI / Polycab/ FiNolex Long point above 6 Mts. Upto 10 Mts. From tapping of point to outlet via switch box. Point 542.0 542.0 150.0 False None None False None False 81300.0 0 2440013 73429 None code10 INTERNAL WIRING & POWER POINTS Wires & Cables Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring 1.5 Sqmm Rmtr 26.0 26.0 1276.0 False None None False None False 33176.0 0 2440014 73429 None code11 INTERNAL WIRING & POWER POINTS Wires & Cables Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring 2.5Sqmm Rmtr 40.0 40.0 4257.0 False None None False None False 170280.0 0 2440015 73429 None code12 INTERNAL WIRING & POWER POINTS Wires & Cables Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring 4Sqmm Rmtr 59.0 59.0 1870.0 False None None False None False 110330.0 0 2440016 73429 None code13 INTERNAL WIRING & POWER POINTS Wires & Cables Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring 6Sqmm Rmtr 70.0 70.0 200.0 False None None False None False 14000.0 0 2440017 73429 None code14 Switches Sockets and Accessories Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall Make : Anchor / Schneider / Legrand 6 way Each 212.0 212.0 121.0 False None None False None False 25652.0 0 2440018 73429 None code15 Switches Sockets and Accessories Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall Make : Anchor / Schneider / Legrand 8 way Each 250.0 250.0 61.0 False None None False None False 15250.0 0 2440019 73429 None code16 Switches Sockets and Accessories Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall Make : Anchor / Schneider / Legrand 12 way Each 325.0 325.0 2.0 False None None False None False 650.0 0 2440020 73429 None code17 Switches Sockets and Accessories Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required No. of machine screws , bolts nuts etc. complte on existing metal / PVC box Make : Anchor / Schneider / Legrand 6 way Each 244.0 244.0 121.0 False None None False None False 29524.0 0 2440021 73429 None code18 Switches Sockets and Accessories Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required No. of machine screws , bolts nuts etc. complte on existing metal / PVC box Make : Anchor / Schneider / Legrand 8 way Each 302.0 302.0 61.0 False None None False None False 18422.0 0 2440022 73429 None code19 Switches Sockets and Accessories Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required No. of machine screws , bolts nuts etc. complte on existing metal / PVC box Make : Anchor / Schneider / Legrand 10-12 way Each 363.0 363.0 2.0 False None None False None False 726.0 0 2440023 73429 None code20 Switches Sockets and Accessories Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate Make : Anchor / Schneider / Legrand 6 Amp one way Each 88.0 88.0 290.0 False None None False None False 25520.0 0 2440024 73429 None code21 Switches Sockets and Accessories Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate Make : Anchor / Schneider / Legrand 6 Amps socket Each 162.0 162.0 53.0 False None None False None False 8586.0 0 2440025 73429 None code22 Switches Sockets and Accessories Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate Make : Anchor / Schneider / Legrand Stepped Fan Regulator Each 313.0 313.0 75.0 False None None False None False 23475.0 0 2440026 73429 None code23 Switches Sockets and Accessories Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate Make : Anchor / Schneider / Legrand 16 Amps 1 way switch Each 249.0 249.0 81.0 False None None False None False 20169.0 0 2440027 73429 None code24 Switches Sockets and Accessories Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate Make : Anchor / Schneider / Legrand 6/16 Amps universal socket Each 249.0 249.0 81.0 False None None False None False 20169.0 0 2440028 73429 None code25 LUMINERIES & LIGHT FIXTURES & ACCESSORIES Make : Panasonic/Phillips / Crompton Led Light Fixture 2 feet - 9/10 W Each 496.0 496.0 4.0 False None None False None False 1984.0 0 2440029 73429 None code26 LUMINERIES & LIGHT FIXTURES & ACCESSORIES Make : Panasonic/Phillips / Crompton Led Light Fixture 4 feet - 20/22 W Each 740.0 740.0 236.0 False None None False None False 174640.0 0 2440030 73429 None code27 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Fabrication and supply of sheet steel enclosure out of 14 SWG CRCA Sheet duly powder coated the contro panel ( Size of 2000 x1500x 450 ) is of compartment alized, All the components are duly wired and connected to Aluminum bus bar. Each 0.43 0.43 50000.0 False None None False None False 21500.0 0 2440031 73429 None code28 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying and fixing of 250 A 4 x 30 x 10 mm Alumunium Strips Rmtr 3078.0 3078.0 12.0 False None None False None False 36936.0 0 2440032 73429 None code29 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T 16 sqmm wire Rmtr 318.0 318.0 40.0 False None None False None False 12720.0 0 2440033 73429 None code30 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying and fixing of LED Panel Board indicating Lamp with required colour Suitable for 220 V AC 50 HZ Each 464.0 464.0 6.0 False None None False None False 2784.0 0 2440034 73429 None code31 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5to 20A single phase Class-1 Accuracy with Temper ProofEnergy Meter. Each 1150.0 1150.0 15.0 False None None False None False 17250.0 0 2440035 73429 None code32 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 5125.0 5125.0 4.0 False None None False None False 20500.0 0 2440036 73429 None code33 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 200A Each 14417.0 14417.0 1.0 False None None False None False 14417.0 0 2440037 73429 None code34 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T 125A ATS Each 74520.0 74520.0 1.0 False None None False None False 74520.0 0 2440038 73429 None code35 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying and fixing of 200 A MCCB Each 21289.0 21289.0 2.0 False None None False None False 42578.0 0 2440039 73429 None code36 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T 63A 4P MCB Each 2399.0 2399.0 4.0 False None None False None False 9596.0 0 2440040 73429 None code37 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T 5 - 32 A TPN Nos 1777.0 1777.0 8.0 False None None False None False 14216.0 0 2440041 73429 None code38 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying and fixing of Earth leakage relay Each 8316.0 8316.0 1.0 False None None False None False 8316.0 0 2440042 73429 None code39 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T Supplying and fixing of 50 x 50 x 6 mm Angle Rmtr 356.0 356.0 10.0 False None None False None False 3560.0 0 2440043 73429 None code40 PANEL & DISTRIBUTION BOARDS PANELS Make : Legrand / Schneider / Anchor / L&T 0 Rmtr 1.0 1.0 1.0 False None None False None False 1.0 0 2440044 73429 None code48 PANEL & DISTRIBUTION BOARDS 40 KVAR APFC Panel Make : Legrand / Schneider / Anchor / L&T Supplying and fixing of Heavy Duty low Voltage Capacitors Kvar 432.0 432.0 10.0 False None None False None False 4320.0 0 2440045 73429 None code49 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting 8Way SP &N No 1695.0 1695.0 12.0 False None None False None False 20340.0 0 2440046 73429 None code50 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting 12Way SP &N No 2067.0 2067.0 2.0 False None None False None False 4134.0 0 2440047 73429 None code51 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting 6Way TP &N No 3735.0 3735.0 3.0 False None None False None False 11205.0 0 2440048 73429 None code52 Supplying fixing & wiring earth leakage miniature circuit breaker (ELMCB) 240 / 450 V up to 300mA sensitivity on Existing / panel Board 16 - 25 Amps 2 pole No 2536.0 2536.0 20.0 False None None False None False 50720.0 0 2440049 73429 None code53 Supplying fixing & wiring earth leakage miniature circuit breaker (ELMCB) 240 / 450 V up to 300mA sensitivity on Existing / panel Board 32 - 40 Amps 4 pole No 2826.0 2826.0 2.0 False None None False None False 5652.0 0 2440050 73429 None code54 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898 5 - 32 Amp SP No 523.0 523.0 130.0 False None None False None False 67990.0 0 2440051 73429 None code55 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898 5 - 32 Amp DP No 1103.0 1103.0 2.0 False None None False None False 2206.0 0 2440052 73429 None code56 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898 5 - 32 A TPN No 1777.0 1777.0 3.0 False None None False None False 5331.0 0 2440053 73429 None code57 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898 40 - 63 Amp TPN No 2399.0 2399.0 1.0 False None None False None False 2399.0 0 2440054 73429 None code58 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING Supplying Fixing and Wiring earth electrode for grounding of lifts,Xmer, DG Sets etc using 40mm dia 2.9mm thick, 2.5mtr long GI pipe with GI funnel with mesh & suitable size reducer fixed on the top of Electrode. The funnel should be enclosed in a cc chamber of 400x400x400 with a cast iron cover. The Earth electrode shall have staggered holes of 12mm dia & electrode shoulde be covered 150mm around with alternate layers of salt & charcoal from the bottom of the CC Chamber. The connection from the electrode is to be established throgh GI strip using GI bolts & nuts. No 4150.0 4150.0 8.0 False None None False None False 33200.0 0 2440055 73429 None code59 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING 25 x 3 mm G.I strip. Rmtr 75.0 75.0 100.0 False None None False None False 7500.0 0 2440056 73429 None code60 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING 600x600x3 GI Plate Each 760.0 760.0 2.0 False None None False None False 1520.0 0 2440057 73429 None code61 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING 25 x 3 mm Rmtr 505.0 505.0 20.0 False None None False None False 10100.0 0 2440058 73429 None code62 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING 600x600x3 Cu. Plate Each 6900.0 6900.0 2.0 False None None False None False 13800.0 0 2440059 73429 None code63 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING 12 SWG GI wire Rmtr 14.0 14.0 200.0 False None None False None False 2800.0 0 2440060 73429 None code64 SERVICE MAINS & WORK UNDER UG CABLE , EARTHING 8 SWG Rmtr 105.0 105.0 50.0 False None None False None False 5250.0 0 2440061 73429 None code65 Supply & Fixing of Heavy Duty Cable Glands Suitable For UG Cable of 1.1KV Class (metal Only) 25mm Dia No 84.0 84.0 2.0 False None None False None False 168.0 0 2440062 73429 None code66 Supply & Fixing of Heavy Duty Cable Glands Suitable For UG Cable of 1.1KV Class (metal Only) 63mm Dia No 400.0 400.0 1.0 False None None False None False 400.0 0 2440063 73429 None code67 Supply & Fixing 2mm thick perforated cable tray with powder coated paint on exising MS Angle support using necessary GI bolts , nuts & washer or welding as required: 150 mmX 50 MM wide tray ( Perforated type ) Rmtr 425.0 425.0 20.0 False None None False None False 8500.0 0 2440064 73429 None code68 Supply & Fixing 2mm thick perforated cable tray with powder coated paint on exising MS Angle support using necessary GI bolts , nuts & washer or welding as required: 300 mm x 50 mm wide cabel tray ( Perforated type ) Rmtr 530.0 530.0 20.0 False None None False None False 10600.0 0 2440065 73429 None code69 FANS & AIR CONDITIONERS Make Fans : Crompton / Usha / Anchor Supplying exhaust fan 0f 1440 RPM of300 mm (12") size with bracket blades complte for light duty suitable to operate on 230V 50 Hz AC Supply Each 1542.0 1542.0 4.0 False None None False None False 6168.0 0 2440066 73429 None code70 FANS & AIR CONDITIONERS Make Fans : Crompton / Usha / Anchor Supplying capacitor type ceiling Fan complete with down rod blades shackle ,caNopies etc. for operation on 230 Vots 50 cycles ,single phase AC supply confirming to ISS -374-1979 with double ball bearing system 48 " Sweep EcoNomy model Each 2085.0 2085.0 68.0 False None None False None False 141780.0 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(COMPOUND WALL) 459628.83 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440067 73430 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m. Page No. 8,Sl. No.1.14..1,VOL-1 Cum 81.76 81.76 26.25 False None None False None False 2146.2 0 2440068 73430 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates. sl.no-2.1.2, pg.no-15. volume-1 Cum 5830.72 5830.72 3.68 False None None False None False 21457.0496 0 2440069 73430 None code03 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Sl.no-5.4, page no-9,volume-2. Cum 5994.24 5994.24 16.54 False None None False None False 99144.7296 0 2440070 73430 None code04 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. S.No. 6.33, Page No.17, Volume-2. Sqm 1188.32 1188.32 122.85 False None None False None False 145985.112 0 2440071 73430 None code05 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates sl.no-2.5.2, page no-17, volume-I. Cum 10392.48 10392.48 3.67 False None None False None False 38140.4016 0 2440072 73430 None code06 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Sl. No. 11.32 , Page No.84, Volume-2. Kg 107.52 107.52 183.4 False None None False None False 19719.168 0 2440073 73430 None code07 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2. Sqm 360.64 360.64 259.35 False None None False None False 93531.984 0 2440074 73430 None code08 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.30, Page No.46, Volume-2. Sqm 152.32 152.32 259.35 False None None False None False 39504.192 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.N 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(UNDER GROUND WATER TANK (5KLD) 188877.9 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440075 73431 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Cum 81.76 81.76 35.59 False None None False None False 2909.8384 0 2440076 73431 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse Cum 5830.72 5830.72 1.81 False None None False None False 10553.6032 0 2440077 73431 None code03 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 228.48 228.48 22.67 False None None False None False 5179.6416 0 2440078 73431 None code04 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 20% ON CONCRETE ITEM) Cum 8313.98 8313.98 6.43 False None None False None False 53458.8914 0 2440079 73431 None code05 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge.. Sqm 417.76 417.76 66.62 False None None False None False 27831.1712 0 2440080 73431 None code06 KSRB 12-6.2: Providing 20mm round M.S. footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 No 286.72 286.72 10.0 False None None False None False 2867.2 0 2440081 73431 None code07 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 103.04 103.04 835.38 False None None False None False 86077.5552 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.9(SEPTIC TANK) 365788.61 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440082 73432 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Cum 81.76 81.76 46.87 False None None False None False 3832.0912 0 2440083 73432 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse Cum 5830.72 5830.72 2.62 False None None False None False 15276.4864 0 2440084 73432 None code03 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 228.48 228.48 32.18 False None None False None False 7352.4864 0 2440085 73432 None code04 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 20% ON CONCRETE ITEM) Cum 8313.98 8313.98 12.79 False None None False None False 106335.8042 0 2440086 73432 None code05 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. Sqm 417.76 417.76 136.32 False None None False None False 56949.0432 0 2440087 73432 None code06 KSRB 12-6.2: Providing 20mm round M.S. footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 No 286.72 286.72 10.0 False None None False None False 2867.2 0 2440088 73432 None code07 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 103.04 103.04 1662.44 False None None False None False 171297.8176 0 2440089 73432 None code08 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Cum 81.76 81.76 2.0 False None None False None False 163.52 0 2440090 73432 None code09 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1075.2 1075.2 1.0 False None None False None False 1075.2 0 2440091 73432 None code10 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 416.64 416.64 1.0 False None None False None False 416.64 0 2440092 73432 None code11 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Cum 444.64 444.64 0.5 False None None False None False 222.32 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(RAIN WATER RECHARGE PIT) 10386.88 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440093 73433 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Cum 81.76 81.76 6.0 False None None False None False 490.56 0 2440094 73433 None code02 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1075.2 1075.2 6.0 False None None False None False 6451.2 0 2440095 73433 None code03 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 416.64 416.64 4.0 False None None False None False 1666.56 0 2440096 73433 None code04 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Cum 444.64 444.64 4.0 False None None False None False 1778.56 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(INTERLOCK PAVERS FOR PARKING) 399236.99 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440097 73434 None code01 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.- Page No. 24,Sl. No.4.27 VOL-3 Cum 2681.28 2681.28 25.4 False None None False None False 68104.512 0 2440098 73434 None code02 Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control-Page No. 56,Sl. No.8.13, VOL-3 Sqm 150.08 150.08 36.0 False None None False None False 5402.88 0 2440099 73434 None code03 Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications. Page No.64 ,Sl. No. 9.32, VOL-2 Sqm 1282.4 1282.4 254.0 False None None False None False 325729.6 0 1707118939000 0 None None Buildings Construction of Market Building at Sy.No 290/1B1, Herga Village, Parkala ward in Udupi CMC Limit, Udupi Taluk and District.(CULVERTS) 406578.96 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2440100 73435 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m Cum 81.76 81.76 32.4 False None None False None False 2649.024 0 2440101 73435 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse Cum 5830.72 5830.72 2.19 False None None False None False 12769.2768 0 2440102 73435 None code03 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 228.48 228.48 29.4 False None None False None False 6717.312 0 2440103 73435 None code04 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 20% ON CONCRETE ITEM) Cum 8313.98 8313.98 14.7 False None None False None False 122215.506 0 2440104 73435 None code05 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 103.04 103.04 1911.0 False None None False None False 196909.44 0 2440105 73435 None code06 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 120.96 120.96 540.0 False None None False None False 65318.4 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1707118940000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1707118940000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1707118940000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1708061751000 0 None None ELIGIBILITY GST shall be paid Separately None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None To qualify for award of this contract, last five years, 2018-19 to 2022-23Satisfactory completed, at least one similar nature of work like Construction of Building work value not less than Rs.148.03 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in one year (for a continuous period of 12 months) the following minimum quantities of work (80 percent of estimated quantity) Providing and laying Cement Concrete ( Plain & Reinforced)-690.00 Cum Laterite Masonry-98.00 Cum Plastering-3802.00 Sqm TMT Steel reinforcement-48570.00 Kg Tiles /Granite floor-912.00 sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- quantity None None None None availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capaTown and working conditions of each of the equipments along with RC issued by R.T.O. / Sale deed/purchase invoice, hire/lease agreements) shall be furnished.1)Tippers-2 No2)Excavator-1 No3)Concrete Mixer ajex/RMC plant-1 No Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- quantity None None None None To qualify for award of this contract, last five years, 2018-19 to 2022-23 achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 592.14 lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None liquid assets and or availability of credit facilities of no less than Rs. 88.82 Lakhs (Credit lines/ letters of credit/ certificates from banks for meeting the fund equirement Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Contractor Registration Certificate True Technical Bid Similar work done Certificate True Technical Bid ESI &EPF registration certificate True Technical Bid Payment more towards workers ESI &EPF challan up to till month True Technical Bid GST registration certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1708164041000 version 0 createdDate None modifiedDate None blockNumber KM MARGA UDUPI street None city UDUPI state Karnataka pin 576101
tenderRecallDTO	None