| 2777596 | 88539 | None | 2.1 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 89.46 | 89.46 | 2098.98 | False | None | None | False | None | False | 187774.7508 | 0 |
| 2777597 | 88539 | None | 6.1 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage chargesof machinery & other incidental chargescomplete as per the direction of engineer incharge of work. | Cum | 8220.0 | 8220.0 | 66.88 | False | None | None | False | None | False | 549753.6 | 0 |
| 2777598 | 88539 | None | 8.6.1 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to concrete surface/brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 323.0 | 323.0 | 184.26 | False | None | None | False | None | False | 59515.98 | 0 |
| 2777599 | 88539 | None | 420.74 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 255.0 | 255.0 | 420.74 | False | None | None | False | None | False | 107288.7 | 0 |
| 2777600 | 88539 | None | 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 137.0 | 137.0 | 604.99 | False | None | None | False | None | False | 82883.63 | 0 |
| 2777601 | 88539 | None | 9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. | Sqm | 2852.0 | 2852.0 | 168.3 | False | None | None | False | None | False | 479991.6 | 0 |
| 2777602 | 88539 | None | 9.12.5 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200 mm | Sqm | 1314.0 | 1314.0 | 36.62 | False | None | None | False | None | False | 48118.68 | 0 |
| 2777603 | 88539 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 168.0 | 168.0 | 279.72 | False | None | None | False | None | False | 46992.96 | 0 |
| 2777604 | 88539 | None | 11.44 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 4345.0 | 4345.0 | 13.32 | False | None | None | False | None | False | 57875.4 | 0 |
| 2777605 | 88539 | None | 0.356 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications | Cum | 124202.0 | 124202.0 | 0.356 | False | None | None | False | None | False | 44215.912 | 0 |
| 2777606 | 88539 | None | 12.11 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications | Cum | 138074.0 | 138074.0 | 0.09 | False | None | None | False | None | False | 12426.66 | 0 |
| 2777607 | 88539 | None | 12.15 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawingand panels of 25mm thick including cost of materials, labour, usage charges complete as perspecifications. (excluding cost of fixtures | Sqm | 6897.0 | 6897.0 | 1.58 | False | None | None | False | None | False | 10897.26 | 0 |
| 2777608 | 88539 | None | 8.55 | Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion using
20mm and down size graded metal machine mixed with 10mm dia main steel bars and 8mm dia stirpes as shown in drawing. The board shall be provided with 12mm thick cement plaster in cement mortar 1:4 on both the sides. The poles shall be embedded in the ground for a depth of 0.5 m with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineer in charge of the work. The cost includes excavation, cost of all materials, cost of steel, painting, centering, transportation charges & fixing charges. | Each | 5861.0 | 5861.0 | 1.0 | False | None | None | False | None | False | 5861.0 | 0 |
| 2777609 | 88539 | None | 12.15 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawingand panels of 25mm thick including cost of materials, labour, usage charges complete as perspecifications. (excluding cost of fixtures) | Sqm | 6897.0 | 6897.0 | 12.92 | False | None | None | False | None | False | 89109.24 | 0 |
| 2777610 | 88539 | None | 12.15 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 7444.0 | 7444.0 | 3.15 | False | None | None | False | None | False | 23448.6 | 0 |
| 2777611 | 88539 | None | 8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 138.0 | 138.0 | 16.51 | False | None | None | False | None | False | 2278.38 | 0 |
| 2777612 | 88539 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(PWD CSR 2023-24 Page No.131, Item No. 14.1.1 Vol -2) | Each | 4884.0 | 4884.0 | 2.0 | False | None | None | False | None | False | 9768.0 | 0 |
| 2777613 | 88539 | None | 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.PWD CSR 2023-24 Vol -2 P.No- 123 I.No-13.34 | Ltr | 9.0 | 9.0 | 2000.0 | False | None | None | False | None | False | 18000.0 | 0 |
| 2777614 | 88539 | None | 13.33.3.25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm ,nominal dia Pipes PWD CSR 2023-24 Vol -2 P.No- 122 SI.No-13.33.3 25 MM Dia | Rmtr | 296.0 | 296.0 | 76.0 | False | None | None | False | None | False | 22496.0 | 0 |
| 2777615 | 88539 | None | 14.7A | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer(PWD CSR 2023-24 Page No.133, Item No. 14.7A Vol -2) | Each | 4121.0 | 4121.0 | 2.0 | False | None | None | False | None | False | 8242.0 | 0 |
| 2777616 | 88539 | None | 13.33.7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 65 mm ,nominal dia Pipes PWD CSR 2023-24 Vol -2 P.No- 123 SI.No-13.33.7 | Rmtr | 1400.0 | 1400.0 | 19.0 | False | None | None | False | None | False | 26600.0 | 0 |
| 2777617 | 88539 | None | 9.9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.PWD CSR 2023-24 Vol -2 P No-60 I No-9.9 | Sqm | 1076.0 | 1076.0 | 4.62 | False | None | None | False | None | False | 4971.12 | 0 |
| 2777618 | 88539 | None | 10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023-24 Vol -2 PNo-71 I No-10.14 | Sqm | 1106.0 | 1106.0 | 6.09 | False | None | None | False | None | False | 6735.54 | 0 |
| 2777619 | 88539 | None | 1.2.1 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ( P No 2 ; I No 1.2.1) Chapter No-1. PVC CONDUICT & ITS ACCESSORIES | Rmtr | 40.0 | 40.0 | 120.0 | False | None | None | False | None | False | 4800.0 | 0 |
| 2777620 | 88539 | None | 1.3.1 | Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20mm dia 2mm thick ( P No 2 ; I No 1.3.1) | Rmtr | 51.0 | 51.0 | 60.0 | False | None | None | False | None | False | 3060.0 | 0 |
| 2777621 | 88539 | None | 1.6.3 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood. After due groove cutting, necessary masonary patch work complete.10''x7''x3 (254x178x76mm) ( P No 3 ; I No 1.6.3) | Each | 77.0 | 77.0 | 10.0 | False | None | None | False | None | False | 770.0 | 0 |
| 2777622 | 88539 | None | 2.1.1 | Chapter No-2. WIRES & CABLES Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Short point upto 3Mtr from tapping point to out let via switch ( P No 5 ; I No 2.1.1) | Point | 200.0 | 200.0 | 12.0 | False | None | None | False | None | False | 2400.0 | 0 |
| 2777623 | 88539 | None | 2.1.2 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Medium point above 3M. upto 6M from tapping point to out let via switch ( P No 5 ; I No 2.1.2) | Point | 275.0 | 275.0 | 12.0 | False | None | None | False | None | False | 3300.0 | 0 |
| 2777624 | 88539 | None | 2.1.3 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch ( P No 5 ; I No 2.1.3) | Point | 400.0 | 400.0 | 16.0 | False | None | None | False | None | False | 6400.0 | 0 |
| 2777625 | 88539 | None | 2.3.1 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials. 1 sqmm (P.No. 5, I.No. 2.3.1) | Rmtr | 14.0 | 14.0 | 210.0 | False | None | None | False | None | False | 2940.0 | 0 |
| 2777626 | 88539 | None | 2.3.3 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials. 2.5 sqmm (P.No. 5&6, I.No. 2.3.3) | Rmtr | 32.0 | 32.0 | 220.0 | False | None | None | False | None | False | 7040.0 | 0 |
| 2777627 | 88539 | None | 2.3.4 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials. 4 sqmm (P.No. 5&6, I.No. 2.3.4) | Rmtr | 45.0 | 45.0 | 105.0 | False | None | None | False | None | False | 4725.0 | 0 |
| 2777628 | 88539 | None | 3.1.2 | Chapter No-3. SWITCHES, SOCKETS & ACCESSORIESSupply 6A flush/projected type socket and a 6 amps flush/ projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush monted wooden box and wiring using necessary capacity wires as required. 6 Amps 3/5 Way ( P No 9 ; I No 3.1.2 ) | Each | 132.0 | 132.0 | 24.0 | False | None | None | False | None | False | 3168.0 | 0 |
| 2777629 | 88539 | None | 3.6.10 | Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854 and IS 1293.32 Amps DP switch( P No 10 ; I No 3.6.10) | Each | 182.0 | 182.0 | 12.0 | False | None | None | False | None | False | 2184.0 | 0 |
| 2777630 | 88539 | None | 3.6.11 | Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps Univerals socket ( P No 10 ; I No 3.6.11) | Each | 162.0 | 162.0 | 16.0 | False | None | None | False | None | False | 2592.0 | 0 |
| 2777631 | 88539 | None | 3.6.4 | Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854 and IS 1293.Electronic stepped regulator. ( P No 10 ; I No 3.6.4) | Each | 290.0 | 290.0 | 5.0 | False | None | None | False | None | False | 1450.0 | 0 |
| 2777632 | 88539 | None | 3.9 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.(P No 10 ; I No 3.9) Chapter No-12. LUMINAIRS / LIGHT FIXTURES & ACCESSORIES | Sq CM | 0.24 | 0.24 | 3200.0 | False | None | None | False | None | False | 768.0 | 0 |
| 2777633 | 88539 | None | 12.5.2 | Supply of round/square recess/surface mounted rolling
type LED Down light with .W GU 10 LED Lamp Rib
Fabricated from Die cast aluminium with white powder
coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ( P No 65 ; I No 12.5.2) | Each | 768.0 | 768.0 | 12.0 | False | None | None | False | None | False | 9216.0 | 0 |
| 2777634 | 88539 | None | 5.6.1 | Chapter No-5. CONTROL SWITCH GEARS & ACCESSORIES Supplying and fixing polished wood board made of not lees then 15mm thick plank on both side with planks made out of more then 2 pieces and fixing the same to the wall using taperd inverted wooden flugs screws etc.8"*6"*1.5" (P.No.24.,I.No.5.6.1) | Each | 70.0 | 70.0 | 10.0 | False | None | None | False | None | False | 700.0 | 0 |
| 2777635 | 88539 | None | 5.7.2 | Supplying & fixing of porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and washers etc, complete. 32 Amps (P.No.24&25,I.No.5.7.2) | Each | 174.0 | 174.0 | 10.0 | False | None | None | False | None | False | 1740.0 | 0 |
| 2777636 | 88539 | None | 5.17.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps DP (P.No. 27 I.No. 5.17.4 ) | Each | 909.0 | 909.0 | 6.0 | False | None | None | False | None | False | 5454.0 | 0 |
| 2777637 | 88539 | None | 5.18.7 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.( II Double Door).8 way SP&N P.No.27&28, I.No. 5.18.7) | Each | 1450.0 | 1450.0 | 8.0 | False | None | None | False | None | False | 11600.0 | 0 |
| 2777638 | 88539 | None | 6.1 | Chapter No-6. L.T. U.G. CABLES Supplying, fixing & wiring, earth electrode for ground conduits. I.C. cutouts and other equipements, on the meter board using 40mm dia 2.90 thick of GI pipe 2.5 mtr long burid in a pit. The pit sholud be gilled with equal pro[ortion of salt and charcoal 150mm alround the pipe to completedepth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per clause 7.3.3 of is 732 using 12mm dia bolts, nuts, washers, & check nut etc., The pipe shall have 16 through holes of 12mm dia. (P.No.40,I.No.6.1) | Each | 2999.7 | 2999.7 | 4.0 | False | None | None | False | None | False | 11998.8 | 0 |
| 2777639 | 88539 | None | 1.1.1 | Chapter No-1 PVC CONDUIT & ITS ACCESSORIES Supplying heavy gauge PVC conduit pipe …….dia .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2mm thick.(P No 2 ; I No 1.1.1) | Rmtr | 50.0 | 50.0 | 50.0 | False | None | None | False | None | False | 2500.0 | 0 |
| 2777640 | 88539 | None | 7.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48'' Sweep (1200)mm Regular model (P.No. 46 I.No. 7.3.1) | Each | 2090.0 | 2090.0 | 5.0 | False | None | None | False | None | False | 10450.0 | 0 |
| 2777641 | 88539 | None | 14.1.2 | Chapter No-14. FIXING CHARGES Supplying and Fixing of.mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.Using 32 mm dia GI pipe (P No 79 ; I No 14.1.2) | Each | 835.0 | 835.0 | 3.0 | False | None | None | False | None | False | 2505.0 | 0 |
| 2777642 | 88539 | None | 14.7.1 | Fixing all types and all capacities fluorescent/ false ceiling/spot light/ CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076'' twin PVC insulated wires, required nos of round blocks and clamps (if required) On wall/ceiling/Rafter/Girders (P.No.79, I.No. 14.7.1) | Each | 110.0 | 110.0 | 14.0 | False | None | None | False | None | False | 1540.0 | 0 |
| 2777643 | 88539 | None | 14.9 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. (P No 80 ; I No 14.9) | Each | 260.0 | 260.0 | 8.0 | False | None | None | False | None | False | 2080.0 | 0 |