| 2794392 | 89555 | None | 11.34B | Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.PWD CSR 2022 Vol-2, Pg -85 I.NO-11.34B | Kg | 143.0 | 143.0 | 486.86 | False | None | None | False | None | False | 69620.98 | 0 |
| 2794393 | 89555 | None | 12.90 | Providing fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor TPs shall not be made) PWD CSR 2022 Vol-2, Vol-2, Pg - 112 I.NO-12.90. | Sqm | 7240.0 | 7240.0 | 25.43 | False | None | None | False | None | False | 184113.2 | 0 |
| 2794394 | 89555 | None | 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. PWD, Belagavi SR 2022 Vol-2, Pg - 100 I.No12.12 | Cum | 75344.0 | 75344.0 | 0.5 | False | None | None | False | None | False | 37672.0 | 0 |
| 2794395 | 89555 | None | 12.17 | Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) PWD, Belagavi
SR 2022 Vol-2,Pg - 100 I.No-12.17 | Sqm | 4866.0 | 4866.0 | 21.42 | False | None | None | False | None | False | 104229.72 | 0 |
| 2794396 | 89555 | None | 12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-chargePWD,Belagavi SR 2022 Vol-2,Pg - 109 I.No-12.54 | Sqm | 475.0 | 475.0 | 6.3 | False | None | None | False | None | False | 2992.5 | 0 |
| 2794397 | 89555 | None | 12.53 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. PWD CSR 2021-22 Volume -2 P.No-105 I.No-12.53 | Sqm | 2847.0 | 2847.0 | 6.3 | False | None | None | False | None | False | 17936.1 | 0 |
| 2794398 | 89555 | None | 023 | 023 Aluminium Handle 15mm (Sl.No 023) | Each | 60.0 | 60.0 | 30.0 | False | None | None | False | None | False | 1800.0 | 0 |
| 2794399 | 89555 | None | 12.68 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.
12.68.1 125x65x2.12mm (PWD SR 2021-22 / Volumme II / I.NO-12.68.1 /P.NO-107) | Each | 38.0 | 38.0 | 60.0 | False | None | None | False | None | False | 2280.0 | 0 |
| 2794400 | 89555 | None | 392 | 0220 Locking Arrangements (Sl.No 392) | Each | 550.85 | 550.85 | 24.0 | False | None | None | False | None | False | 13220.4 | 0 |
| 2794401 | 89555 | None | 401 | 0265Nails and Screws (Sl.No 401) | Kg | 45.76 | 45.76 | 10.0 | False | None | None | False | None | False | 457.6 | 0 |
| 2794402 | 89555 | None | 6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD CSR 2021-22 Volume 2 P.No-14 I.No-6.8 | Cum | 6690.0 | 6690.0 | 3.11 | False | None | None | False | None | False | 20805.9 | 0 |
| 2794403 | 89555 | None | 8.3.2 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.:(PWD SR 2021-22 / Volumme II / I.NO-8.3.2 /P.NO-41) | Sqm | 276.0 | 276.0 | 379.89 | False | None | None | False | None | False | 104849.64 | 0 |
| 2794404 | 89555 | None | 8.3.2 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.:(PWD SR 2021-22 / Volumme II / I.NO-8.3.2 /P.NO-41) | Sqm | 213.0 | 213.0 | 191.71 | False | None | None | False | None | False | 40834.23 | 0 |
| 2794405 | 89555 | None | 8.21 | Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials,labour complete as per specifications and as per directions of Engineerin-charge.(PWD SR 2021-22 / Volumme II / I.NO8.21 /P.NO-44) | Sqm | 32.0 | 32.0 | 571.6 | False | None | None | False | None | False | 18291.2 | 0 |
| 2794406 | 89555 | None | 8.3.2 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.:(PWD SR 2021-22 / Volumme II / I.NO-8.3.2 /P.NO-41) | Sqm | 276.0 | 276.0 | 26.775 | False | None | None | False | None | False | 7389.9 | 0 |
| 2794407 | 89555 | None | 8.3.2 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.:(PWD SR 2021-22 / Volumme II / I.NO-8.3.2 /P.NO-41) | Sqm | 213.0 | 213.0 | 242.37 | False | None | None | False | None | False | 51624.81 | 0 |
| 2794408 | 89555 | None | 9.4 | Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge (PWD SR 2021-22 / Volumme II / I.NO-9.4 /P.NO-59) | Cum | 6200.0 | 6200.0 | 12.01 | False | None | None | False | None | False | 74462.0 | 0 |
| 2794409 | 89555 | None | 9.35 | Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing,polishing complete as per specifications.(PWD CSR 2021-22 Volume -2 Page No-64 I.No-9.35) | Sqm | 1324.0 | 1324.0 | 193.8 | False | None | None | False | None | False | 256591.2 | 0 |
| 2794410 | 89555 | None | 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (PWD SR 2021-22 / Volumme II / I.NO- 9.11 /P.NO-60) | Sqm | 773.0 | 773.0 | 8.93 | False | None | None | False | None | False | 6902.89 | 0 |
| 2794411 | 89555 | None | 9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(PWD SR 2021-22 / Volumme II / I.NO- 9.39 /P.NO-65) | Sqm | 2075.0 | 2075.0 | 44.43 | False | None | None | False | None | False | 92192.25 | 0 |
| 2794412 | 89555 | None | 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 / Volumme II / I.NO- 8.34.1 /P.NO-47) | Sqm | 41.0 | 41.0 | 55.69 | False | None | None | False | None | False | 2283.29 | 0 |
| 2794413 | 89555 | None | 8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 / Volumme II / I.NO- 8.33.2 /P.NO-46 | Sqm | 105.0 | 105.0 | 53.55 | False | None | None | False | None | False | 5622.75 | 0 |
| 2794414 | 89555 | None | 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 / Volumme II / I.NO- 8.25 /P.NO-45 | Sqm | 105.0 | 105.0 | 571.6 | False | None | None | False | None | False | 60018.0 | 0 |
| 2794415 | 89555 | None | 8.28 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 / Volumme II / I.NO- 8.28 /P.NO-45 | Sqm | 66.0 | 66.0 | 242.37 | False | None | None | False | None | False | 15996.42 | 0 |
| 2794416 | 89555 | None | 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD CSR 2021-22 Vol -2 P.No- 48 I.No-8.40 | Sqm | 90.0 | 90.0 | 25.44 | False | None | None | False | None | False | 2289.6 | 0 |
| 2794417 | 89555 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests PWD CSR 2021-22 Vol -2 P.No- 123 I.No-14.1.1 | Each | 4246.0 | 4246.0 | 4.0 | False | None | None | False | None | False | 16984.0 | 0 |
| 2794418 | 89555 | None | 13.34 | Providing and placing on terrace(at all floor levels) polyethylene water storage tanks as per IS12701 marked, with cover suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes,but without fittings and the base support for tank.[PWD SR2022/Vol-II/1st Addenda w.e.f 21-04-2022/It.no-13.34] | Ltr | 8000.0 | 8000.0 | 2.0 | False | None | None | False | None | False | 16000.0 | 0 |
| 2794419 | 89555 | None | 7.6 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:PWD CSR V-2 -2022 I.NO:7.6 P.NO-21 | Rmtr | 524.0 | 524.0 | 40.0 | False | None | None | False | None | False | 20960.0 | 0 |
| 2794420 | 89555 | None | 14.17.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: PWD CSR V-2 -202214.17.1 p.no-124 | Each | 2529.0 | 2529.0 | 4.0 | False | None | None | False | None | False | 10116.0 | 0 |
| 2794421 | 89555 | None | 13.4.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore PWD CSR 2021-22 Vol -2 P.No- 115 I.No-13.4.1 | Each | 528.0 | 528.0 | 5.0 | False | None | None | False | None | False | 2640.0 | 0 |
| 2794422 | 89555 | None | 15.5.3 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore PWD CSR 2021-22 Vol -2 P.No- 115 I.No-13.5.3 | Each | 384.0 | 384.0 | 4.0 | False | None | None | False | None | False | 1536.0 | 0 |
| 2794423 | 89555 | None | 13.8.1.1 | Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore PWD CSR 2021-22 Vol -2 P.No- 116 I.No-13.8.1.1 | Set | 105.0 | 105.0 | 6.0 | False | None | None | False | None | False | 630.0 | 0 |
| 2794424 | 89555 | None | 13.33.1 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings includes jointing of pipes&fitting one step CPVC solvent cement,trenching,refilling&testing of joints complete as per direction of engineer in charge. (External Work).[PWD SR2022/Vol-II/1st Addenda w.e.from 21-04-2022/It.no-13.33.1] -15mm Nominal Dia Pipes | Rmtr | 165.0 | 165.0 | 40.0 | False | None | None | False | None | False | 6600.0 | 0 |
| 2794425 | 89555 | None | 166 | 066 Brass bib-cock 15 mm dia PWD SR2022/Vol-II/Sl.no.066 P.No-A1-13, | Each | 210.0 | 210.0 | 8.0 | False | None | None | False | None | False | 1680.0 | 0 |
| 2794426 | 89555 | None | 072 | 0072 C.P.brass pillar tap elbow operated PWD SR2022/Vol-II/Sl.no.072 P.No-A1-13, | Each | 415.25 | 415.25 | 1.0 | False | None | None | False | None | False | 415.25 | 0 |
| 2794427 | 89555 | None | 2.8 | GI pipe of 80mm dia RWS SR2022 Sl.no.2.8 P.No-142, | Rmtr | 754.0 | 754.0 | 16.0 | False | None | None | False | None | False | 12064.0 | 0 |
| 2794428 | 89555 | None | 134 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestvamendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:.[PWD SR2022/Vol-VI/P.no-134/SOR Code-M010F] -PVC Pipes 90mm Dia 6kg/Sqcm& Class3. | Rmtr | 281.0 | 281.0 | 35.0 | False | None | None | False | None | False | 9835.0 | 0 |
| 2794429 | 89555 | None | 2.1.1 and 2.1.2 | Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using 1100V grade,copper conductor fexibele multistrand FRLS PVC insulated, 2 x 1.5 Sqmm cable conferming to GTP,with a 6AMPS flush type SP Controll switch shal be fixed on existing plastic sheet or Gang box, the other end of the wires shall be terminated wiht sufficeint loose length in a wood or PVC round block. complete for each outlet. [PWD Ele SR2022-23/Vol-VI/P.no-2/It.no-2.1.1&2.1.2].Short point upto 3m from tapping point to out let via switch | Point | 276.0 | 276.0 | 16.0 | False | None | None | False | None | False | 4416.0 | 0 |
| 2794430 | 89555 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick. [PWD Ele SR2022-23/Vol-VI/P.no-1/It.no-1.2.2] | Rmtr | 70.0 | 70.0 | 55.0 | False | None | None | False | None | False | 3850.0 | 0 |
| 2794431 | 89555 | None | 1.5.2 | Supplying and fixing PVC/metal conduit Deep junction box.25 mm deep Junction box [PWD Ele SR2022-23/Vol-VI/P.no-1/It.no-1.5.2] | Each | 51.0 | 51.0 | 15.0 | False | None | None | False | None | False | 765.0 | 0 |
| 2794432 | 89555 | None | 1.8.3 | Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm . etc. as required.32mm.[PWD Ele SR2022-23/Vol-VI/P.no-2/It.no-1.8.3] | Rmtr | 41.0 | 41.0 | 55.0 | False | None | None | False | None | False | 2255.0 | 0 |
| 2794433 | 89555 | None | 2.3.1 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.[PWD Ele SR2022-23/Vol-VI/P.no-3/It.no-2.3.1] 1.0 Sqmm | Rmtr | 18.0 | 18.0 | 160.0 | False | None | None | False | None | False | 2880.0 | 0 |
| 2794434 | 89555 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.[PWD Ele SR2022-23/Vol-VI/P.no-3/It.no-2.3.2] 1.5 Sqmm | Rmtr | 26.0 | 26.0 | 50.0 | False | None | None | False | None | False | 1300.0 | 0 |
| 2794435 | 89555 | None | 3.3.3 | Supplyig and fixing surface /flush mounting unbreakable PVC modulur box suitable for mounting modulur switch plates with due groove cutting in brick/c.c wall ,including necessary rawl plugs,Machine/NF screws etc,complete.[PWD Ele SR2022-23/Vol-VI/P.no-5/It.no-3.3.3]-6Way | Each | 149.0 | 149.0 | 10.0 | False | None | None | False | None | False | 1490.0 | 0 |
| 2794436 | 89555 | None | 3.3.4 | Supplyig and fixing surface /flush mounting unbreakable PVC modulur box suitable for mounting modulur switch plates with due groove cutting in brick/c.c wall ,including necessary rawl plugs,Machine/NF screws etc,complete.[PWD Ele SR2022-23/Vol-VI/P.no-5/It.no-3.3.4]-8 Way | Each | 195.0 | 195.0 | 10.0 | False | None | None | False | None | False | 1950.0 | 0 |
| 2794437 | 89555 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. [PWD Ele SR2022-23/Vol-VI/P.no-5/It.no-3.5.3]-6Way | Each | 244.0 | 244.0 | 10.0 | False | None | None | False | None | False | 2440.0 | 0 |
| 2794438 | 89555 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. [PWD Ele SR2022-23/Vol-VI/P.no-5/It.no-3.5.4]-8Way | Each | 302.0 | 302.0 | 8.0 | False | None | None | False | None | False | 2416.0 | 0 |
| 2794439 | 89555 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.[PWD Ele2022-23/Vo-VI/P.no-5/It.no-3.6.1]-6Amps One Way | Each | 88.0 | 88.0 | 18.0 | False | None | None | False | None | False | 1584.0 | 0 |
| 2794440 | 89555 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.[PWD Ele2022-23/Vo-VI/P.no-5/It.no-3.6.3]-6Amps 3Way socket | Each | 162.0 | 162.0 | 10.0 | False | None | None | False | None | False | 1620.0 | 0 |
| 2794441 | 89555 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.[PWD Ele2022-23/Vo-VI/P.no-5/It.no-3.6.4]-Stepped Fan Regulator | Each | 313.0 | 313.0 | 10.0 | False | None | None | False | None | False | 3130.0 | 0 |
| 2794442 | 89555 | None | 5.18.1 | Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCB's single phase /3phase /single door with powder coated painting. Made out of 14 SWG MS enclosure.[PWD Ele SR2022-23/Vol-VI/P.no-13/It.no-5.18.1]-Single Door, 4 Way SP & N | Each | 1104.0 | 1104.0 | 4.0 | False | None | None | False | None | False | 4416.0 | 0 |
| 2794443 | 89555 | None | 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. [PWD Ele SR2022-23/Vol-VI/P.no-13/It.no-5.18.1]-6-32A SP | Each | 523.0 | 523.0 | 5.0 | False | None | None | False | None | False | 2615.0 | 0 |
| 2794444 | 89555 | None | 3.14.6 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.[PWD Ele SR2022-23/Vol-VI/P.no-6/It.no-3.14.6]-6-32A SP | Each | 63.0 | 63.0 | 5.0 | False | None | None | False | None | False | 315.0 | 0 |
| 2794445 | 89555 | None | 11.5.2 | Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powdercoated prewired to mains connector & has swivelling unit ofaluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70%lumen maintenance with CRI 80. Power Input: 220-240V50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working understandard electrical condition. LED square or round down light 10-12W-[PWD Ele SR2022-23/Vol-VI/P.no-38/It.no-11.5.2] | Each | 768.0 | 768.0 | 20.0 | False | None | None | False | None | False | 15360.0 | 0 |
| 2794446 | 89555 | None | 6.3.1 | Supplying & fixing of Capacitor Type ceiling fan complete with down rod blades,shackle,canapies etc for operation on 230v,50 cycles.Single phase ac Supply Confirming to ISS-374-1979 and with double ball bearing system- 48"Sweep(1200mm)Regular Model.-[PWD Ele SR2022-23/Vol-VI/P.no-22/It.no-6.3.1] | Each | 2085.0 | 2085.0 | 6.0 | False | None | None | False | None | False | 12510.0 | 0 |
| 2794447 | 89555 | None | 6.2.1 | Supplying & fixing of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230v,50Hz,AC Supply Complete 12"Sweep(300mm)Regular Model.-[PWD Ele SR2022-23/Vol-VI/P.no-22/It.no-6.2.1] | Each | 2997.0 | 2997.0 | 4.0 | False | None | None | False | None | False | 11988.0 | 0 |