createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1708758982288 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 717200.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 05-03-2024 17:30:00 tenderQueryClose 01-03-2024 14:00:00 technicalBidOpen 07-03-2024 11:00:00 publishedDate 27-02-2024 00:19:33 publishedByPost BMTC_EE_HOFF_BNG publishedByUser KPE14985 - RANGARAJU B P bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 01-03-2024 15:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Narasimhamurthy splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022537447 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1708758982324 version 8 createdDate None modifiedDate None tenderNumber BMTC/2023-24/BD/WORK_INDENT41 title Construction of Staff Quarters at Shanthinagar, Bangalore description Construction of Staff Quarters at Shanthinagar, Bangalore category WORKS categoryText Works ecv 40423204.44 deptName Bangalore Metropolitan Transport Corporation status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 3586 locationName Bangalore Metropolitan Transport Corporation Office Bengaluru provisionalAmount 47811000.0 groupOverheadTotal None fileNumber 1706
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1708758982000 0 None None Buildings Construction of Staff Quarters at Shanthinagar, Bangalore 40423204.44 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2794773 89575 None code01 Stilt & Ground Floor Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.P8/1.2 Vol 1 Cum 71.5 71.5 472.5 False None None False None False 33783.75 0 2794774 89575 None code02 Earth work excavation by manual means for drains,canals, waste eir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ghts,removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Vol 01 P 5/1.4.1 In all kinds of soils Depth upto 1.5 m Cum 204.6 204.6 866.43 False None None False None False 177271.578 0 2794775 89575 None code03 Earth work excavation by manual means for drains,canals, waste weir, raft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils ,as per drawing and chnicalspecifications, including setting out, shoring, strutting, brricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off theexcavated stuff or sorting & stacking the selected stuff for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces equired to complete the work.Vol 01 P 5/1.4.2 Depth exceeding 1.5m, but not exceeding 3 m. Cum 218.9 218.9 739.5 False None None False None False 161876.55 0 2794776 89575 None code04 1.11 Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.Vol 01 P 07/1.11. Cum 2394.7 2394.7 221.13 False None None False None False 529540.011 0 2794777 89575 None code05 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse Vol 01 P 15/2.1.2 . Cum 5726.6 5726.6 146.13 False None None False None False 836828.058 0 2794778 89575 None code06 Gravel filling to the foundation and basement with approved new Gravel including watering, tamping in layers of 15cms.thick with steel runners, rammers etc., including breaking clots, removing all vegetation etc. complete including consolidation with all all leads and lifts etc., complete as per specification .Gravel 5 mm to 10 mm Vol 02 P A 20/258 Cum 190.0 190.0 1295.0 False None None False None False 246050.0 0 2794779 89575 None code07 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately)M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates vol 1, P 15/2.2.3.1 aggregates. Cum 7331.6 7331.6 279.42 False None None False None False 2048595.672 0 2794780 89575 None code08 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with Cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Providing Size Stone masonry with hard stone in foundation & plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5964.2 5964.2 18.0 False None None False None False 107355.6 0 2794781 89575 None code09 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge.vol 2, P 59/9.4 Cum 6820.0 6820.0 80.0 False None None False None False 545600.0 0 2794782 89575 None code10 6.5 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Vol 02 P 13/6.5 Cum 7739.6 7739.6 223.0 False None None False None False 1725930.8 0 2794783 89575 None code11 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 998.8 998.8 127.0 False None None False None False 126847.6 0 2794784 89575 None code12 Providing and laying in position plain cement concrete for leveling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse Vol 01 P15/2.1.4 aggregates Cum 6292.0 6292.0 8.0 False None None False None False 50336.0 0 2794785 89575 None code13 Providing and laying in position Reinforced cement concrete for all Foundation works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cills /Lintels Cum 6537.3 6537.3 15.0 False None None False None False 98059.5 0 2794786 89575 None code14 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.m2 321.00 Vol 02 P 42/8.7 Sqm 353.1 353.1 1160.0 False None None False None False 409596.0 0 2794787 89575 None code15 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Vol 02 P 42/8.9 Sqm 361.9 361.9 460.0 False None None False None False 166474.0 0 2794788 89575 None code16 KSRB 15.3.14 Providing 12mm thick cement plaster in single coat with CM 1:4 to ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.Vol 02 P 42/8.6.1 Sqm 310.2 310.2 700.0 False None None False None False 217140.0 0 2794789 89575 None code17 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Vol 02 P 50/8.51 Sqm 91.3 91.3 1860.0 False None None False None False 169818.0 0 2794790 89575 None code18 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. completeSize of Tile 600x600 mm.Vol 02 P 61/9.17.3 Sqm 1222.1 1222.1 777.0 False None None False None False 949571.7 0 2794791 89575 None code19 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.Vol 02 P 71/10.14 Cum 1671.4 1671.4 155.0 False None None False None False 259067.0 0 2794792 89575 None code20 Providing and fixing Ceramic tiles of size 300x300 mm for flooring, threads,steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush pointing with white cement mixed with matching colour pigment including curing, cleaning etc., complete. The work includes cost of all materials, mortar,labour charges for all items of work, hire charges for equipment, etc., complete as per specification. Sqm 677.6 677.6 18.0 False None None False None False 12196.8 0 2794793 89575 None code21 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3169.1 3169.1 109.0 False None None False None False 345431.9 0 2794794 89575 None code22 Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.Vol 02 P 99/12.12 Cum 82878.4 82878.4 2.0 False None None False None False 165756.8 0 2794795 89575 None code23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part I) 1991. from manufacturer complete as per spcification. do 30 mm thick both side commercial. Vol 02 P 106/12.57.3 Sqm 2901.8 2901.8 63.0 False None None False None False 182813.4 0 2794796 89575 None code24 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer in charge.Vol 02 P 105/12.54. Sqm 522.5 522.5 13.0 False None None False None False 6792.5 0 2794797 89575 None code25 KSRB 7.10 : Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections anodised 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting with making good the original surface using cement mortar, aluminium sections pretreated for removal of any and including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. P 38/7.11.2 Sqm 3374.8 3374.8 59.0 False None None False None False 199113.2 0 2794798 89575 None code26 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Vol 02 P 47/8.35.2 Sqm 104.5 104.5 1860.0 False None None False None False 194370.0 0 2794799 89575 None code27 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied at 1.43 ltr/10 m over and including priming coat of exterior primer applied at 2.20 kg/10 m) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 145.2 145.2 4400.0 False None None False None False 638880.0 0 2794800 89575 None code28 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. Sqm 99.0 99.0 11.0 False None None False None False 1089.0 0 2794801 89575 None code29 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge..Vol 02 P 48/8.42 Sqm 143.0 143.0 200.0 False None None False None False 28600.0 0 2794802 89575 None code30 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Vol 02 P 85/11.34A Kg 161.7 161.7 1222.0 False None None False None False 197597.4 0 2794803 89575 None code31 Providing and fixing Stainless Steel hand rails for height of 900mm using 62.50mm dia of 16 gauge for top measure and verticals at 1.50m c/c and 50mm dia of 16 gauge stainless steel pipes of 4 rows below top measure at equal intervals including fixing with 5omm dia GI pipe including cutting, welding bending wherver necessary with suitable caps at top & bottm tec complete as per technical specification and as directed by the Engineer in charge of work. balcony ,P 48/7.39 Sqm 5770.6 5770.6 36.0 False None None False None False 207741.6 0 2794804 89575 None code32 Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members asshown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specifiocation. Sqm 3227.4 3227.4 9.0 False None None False None False 29046.6 0 2794805 89575 None code33 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at 150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.Vol 02 P 133/15.1 Sqm 819.5 819.5 55.66 False None None False None False 45613.37 0 2794806 89575 None code34 Providing groove cutting for width of 5mm to 10mm and depth 80mm 100mm including cost of cutting machine, generator and HOM of machinery including cost of blade, cement etc, including cleaning of groove and providing sand and hot bitumen fillars and filler material etc., including cost and conveyance of all materials, albour, lead and lift charges and all other incidental charges as per drawing and as per specifications. (Page.162/Item No. 22.8) concrete pavement Sqm 126.5 126.5 600.0 False None None False None False 75900.0 0 2794807 89575 None code35 Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications Vol 02 P 64/9.32 Sqm 1259.5 1259.5 96.0 False None None False None False 120912.0 0 2794808 89575 None code36 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm Kerb Stone Mtr 465.3 465.3 50.0 False None None False None False 23265.0 0 2794809 89575 None code37 First Floor Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse Vol 1,P 15/2.2.2.1 aggregates. Cum 10259.96 10259.96 142.0 False None None False None False 1456914.32 0 2794810 89575 None code38 6.5 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Vol 02 P 13/6.5 Cum 7817.0 7817.0 135.0 False None None False None False 1055295.0 0 2794811 89575 None code39 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1925.87 1925.87 98.0 False None None False None False 188735.26 0 2794812 89575 None code40 Providing and laying in position Reinforced cement concrete for all Foundation works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cills /Lintels Cum 6602.47 6602.47 7.2 False None None False None False 47537.784 0 2794813 89575 None code41 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse Vol 1,P 15/2.2.2.1 for chejjas Cum 6672.27 6672.27 4.2 False None None False None False 28023.534 0 2794814 89575 None code42 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.m2 321.00 Vol 02 P 42/8.7 Sqm 356.63 356.63 927.0 False None None False None False 330596.01 0 2794815 89575 None code43 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Vol 02 P 42/8.9 Sqm 365.52 365.52 240.0 False None None False None False 87724.8 0 2794816 89575 None code44 KSRB 15.3.14 Providing 12mm thick cement plaster in single coat with CM 1:4 to ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.Vol 02 P 42/8.6.1 Sqm 313.3 313.3 320.0 False None None False None False 100256.0 0 2794817 89575 None code45 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Vol 02 P 50/8.51 Sqm 92.21 92.21 1260.0 False None None False None False 116184.6 0 2794818 89575 None code46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. completeSize of Tile 600x600 mm.Vol 02 P 61/9.17.3 Sqm 1234.32 1234.32 500.0 False None None False None False 617160.0 0 2794819 89575 None code47 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.Vol 02 P 71/10.14 Sqm 1082.11 1082.11 130.0 False None None False None False 140674.3 0 2794820 89575 None code48 Providing and fixing Ceramic tiles of size 400x400 mm for flooring, threads,steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush pointing with white cement mixed with matching colour pigment including curing, cleaning etc., complete. The work includes cost of all materials, mortar,labour charges for all items of work, hire charges for equipment, etc., complete as per specification. SRP 112/I 14.63/2018 19). Sqm 684.38 684.38 18.0 False None None False None False 12318.84 0 2794821 89575 None code49 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3200.79 3200.79 69.0 False None None False None False 220854.51 0 2794822 89575 None code50 Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.Vol 02 P 99/12.12 Cum 83707.18 83707.18 2.0 False None None False None False 167414.36 0 2794823 89575 None code51 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part I) 1991. from manufacturer complete as per spcification. do 30 mm thick both side commercial. Vol 02 P 106/12.57.3 Sqm 2930.82 2930.82 63.0 False None None False None False 184641.66 0 2794824 89575 None code52 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer in charge.Vol 02 P 105/12.54. Sqm 1007.48 1007.48 13.0 False None None False None False 13097.24 0 2794825 89575 None code53 KSRB 7.10 : Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections anodised 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting with making good the original surface using cement mortar, aluminium sections pretreated for removal of any and including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. P 38/7.11.2 Sqm 3408.55 3408.55 44.0 False None None False None False 149976.2 0 2794826 89575 None code54 Providing Thermo Mechanically Treated bars of grade Fe 500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (Thelaps and wastages shall not be measured separately) Volume 2 ,Page 84/11.32. Quintal 10665.6 10665.6 157.0 False None None False None False 1674499.2 0 2794827 89575 None code55 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Vol 02 P 47/8.35.2 Sqm 105.55 105.55 1250.0 False None None False None False 131937.5 0 2794828 89575 None code56 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Vol 02 P 48/8.41 Sqm 99.99 99.99 20.61 False None None False None False 2060.7939 0 2794829 89575 None code57 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge..Vol 02 P 48/8.42 Sqm 144.43 144.43 358.56 False None None False None False 51786.8208 0 2794830 89575 None code58 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Vol 02 P 85/11.34A Kg 163.32 163.32 3650.85 False None None False None False 596256.822 0 2794831 89575 None code59 Providing and fixing Stainless Steel hand rails for height of 900mm using 62.50mm dia of 16 gauge for top measure and verticals at 1.50m c/c and 50mm dia of 16 gauge stainless steel pipes of 4 rows below top measure at equal intervals including fixing with 5omm dia GI pipe including cutting, welding bending wherver necessary with suitable caps at top & bottm tec complete as per technical specification and as directed by the Engineer in charge of work. balcony ,P 48/7.39 Sqm 5828.31 5828.31 44.0 False None None False None False 256445.64 0 2794832 89575 None code60 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at 150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.Vol 02 P 133/15.1 Sqm 827.7 827.7 55.66 False None None False None False 46069.782 0 2794833 89575 None code61 Second Floor Providing and laying cement concrete using 20mm and down size jelly or ready mixed concrete for RCC works laid in 15 cm thick layers and well compacted including vibrating curing and necessary steel or ply wood or plank centering and form work etc including smooth finish in CM 1:3 with all lead and lift etc complete (exclusive of cost of steel and fabrication charges) P 19/4.49.2 Ready mixed cement concrete for beams, columns,staircase and roof with M 25 (cement 340 kg/cum) Cum 9668.04 9668.04 200.0 False None None False None False 1933608.0 0 2794834 89575 None code62 6.5 Providing Brick work with common burnt clay machine moulded bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Vol 02 P 13/6.5 Cum 7894.36 7894.36 135.0 False None None False None False 1065738.6 0 2794835 89575 None code63 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1018.78 1018.78 98.0 False None None False None False 99840.44 0 2794836 89575 None code64 Providing and laying in position Reinforced cement concrete for all Foundation works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cills /Lintels Cum 6668.05 6668.05 7.2 False None None False None False 48009.96 0 2794837 89575 None code65 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.m2 321.00 Vol 02 P 42/8.7 Sqm 360.16 360.16 927.0 False None None False None False 333868.32 0 2794838 89575 None code66 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Vol 02 P 42/8.9 Sqm 369.14 369.14 240.0 False None None False None False 88593.6 0 2794839 89575 None code67 KSRB 15.3.14 Providing 12mm thick cement plaster in single coat with CM 1:4 to ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.Vol 02 P 42/8.6.1 Sqm 316.4 316.4 320.0 False None None False None False 101248.0 0 2794840 89575 None code68 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Vol 02 P 50/8.51 Sqm 93.13 93.13 1260.0 False None None False None False 117343.8 0 2794841 89575 None code69 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. completeSize of Tile 600x600 mm.Vol 02 P 61/9.17.3 Sqm 1246.54 1246.54 500.0 False None None False None False 623270.0 0 2794842 89575 None code70 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.Vol 02 P 71/10.14 Cum 1092.83 1092.83 130.0 False None None False None False 142067.9 0 2794843 89575 None code71 Providing and fixing Ceramic tiles of size 400x400 mm for flooring, threads,steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush pointing with white cement mixed with matching colour pigment including curing, cleaning etc., complete. The work includes cost of all materials, mortar,labour charges for all items of work, hire charges for equipment, etc., complete as per specification. SRP 112/I 14.63/2018 19). Sqm 691.05 691.05 18.0 False None None False None False 12438.9 0 2794844 89575 None code72 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3232.48 3232.48 69.0 False None None False None False 223041.12 0 2794845 89575 None code73 Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.Vol 02 P 99/12.12 Cum 84535.97 84535.97 2.0 False None None False None False 169071.94 0 2794846 89575 None code74 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part I) 1991. from manufacturer complete as per spcification. do 30 mm thick both side commercial. Vol 02 P 106/12.57.3 Sqm 2959.84 2959.84 63.0 False None None False None False 186469.92 0 2794847 89575 None code75 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer in charge.Vol 02 P 105/12.54. Sqm 484.5 484.5 13.0 False None None False None False 6298.5 0 2794848 89575 None code76 KSRB 7.10 : Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections anodised 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting with making good the original surface using cement mortar, aluminium sections pretreated for removal of any and including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. P 38/7.11.2 Sqm 3442.3 3442.3 44.0 False None None False None False 151461.2 0 2794849 89575 None code77 Providing Thermo Mechanically Treated bars of grade Fe 500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (Thelaps and wastages shall not be measured separately) Volume 2 ,Page 84/11.32. Quintal 10771.2 10771.2 202.1 False None None False None False 2176859.52 0 2794850 89575 None code78 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Vol 02 P 47/8.35.2 Sqm 106.59 106.59 1250.0 False None None False None False 133237.5 0 2794851 89575 None code79 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Vol 02 P 48/8.41 Sqm 100.98 100.98 20.61 False None None False None False 2081.1978 0 2794852 89575 None code80 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge..Vol 02 P 48/8.42 Sqm 145.86 145.86 358.56 False None None False None False 52299.5616 0 2794853 89575 None code81 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Vol 02 P 85/11.34A Kg 164.93 164.93 3650.85 False None None False None False 602134.6905 0 2794854 89575 None code82 Providing and fixing Stainless Steel hand rails for height of 900mm using 62.50mm dia of 16 gauge for top measure and verticals at 1.50m c/c and 50mm dia of 16 gauge stainless steel pipes of 4 rows below top measure at equal intervals including fixing with 5omm dia GI pipe including cutting, welding bending wherver necessary with suitable caps at top & bottm tec complete as per technical specification and as directed by the Engineer in charge of work. balcony ,P 48/7.39 Sqm 5886.01 5886.01 44.0 False None None False None False 258984.44 0 2794855 89575 None code83 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at 150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.Vol 02 P 133/15.1 Sqm 835.89 835.89 321.66 False None None False None False 268872.3774 0 2794856 89575 None code84 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.Vol 02 P 75/11.2 Kgs 116.69 116.69 6000.0 False None None False None False 700140.0 0 2794857 89575 None code85 Granular aggregate Vol 1 P A 38 /8 40mm downsixe Cum 1250.0 1250.0 36.0 False None None False None False 45000.0 0 2794858 89575 None code86 Granular aggregate Vol 1 P A 38 /7 53mm downsize Cum 1250.0 1250.0 24.0 False None None False None False 30000.0 0 2794859 89575 None code87 River sand Cum 1764.0 1764.0 12.0 False None None False None False 21168.0 0 2794860 89575 None code88 KSRB 13 8.1 Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No. KBS 13.2.15.1/13.9 P 93/13.66 Mtr 460.08 460.08 160.0 False None None False None False 73612.8 0 2794861 89575 None code89 Water supply & Sanitary works Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore Vol 2 P115/13.5.3 No 422.4 422.4 12.0 False None None False None False 5068.8 0 2794862 89575 None code90 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore Vol 2 P115/13.1.1 No 518.1 518.1 6.0 False None None False None False 3108.6 0 2794863 89575 None code91 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore Vol 2 P116/13.7.3 No 368.5 368.5 6.0 False None None False None False 2211.0 0 2794864 89575 None code92 Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connections including conveying and fixing of necessary G.I. specials with appurtenances. complete, with all lead and lift 20mm dia BWSSB P79/54.2 No 2909.5 2909.5 1.0 False None None False None False 2909.5 0 2794865 89575 None code93 Providing and fixing gun metal non return valve of approved quality (screwed end) :32 mm nominal bore Horizontal No 708.4 708.4 2.0 False None None False None False 1416.8 0 2794866 89575 None code94 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 15 mm dia Sl.No 13.31.1 VOL 2 first ammendment 15mm nominal OD pipes Mtr 185.9 185.9 20.0 False None None False None False 3718.0 0 2794867 89575 None code95 20mm nominal OD pipes Mtr 262.9 262.9 40.0 False None None False None False 10516.0 0 2794868 89575 None code96 25mm nominal OD pipes Mtr 347.6 347.6 90.0 False None None False None False 31284.0 0 2794869 89575 None code97 32mm nominal OD pipes Mtr 374.0 374.0 110.0 False None None False None False 41140.0 0 2794870 89575 None code98 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g.Sl.No 13.13 Page No.117 Volume II No 741.4 741.4 30.0 False None None False None False 22242.0 0 2794871 89575 None code99 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Vol 2 P116/13.9.2 No 242.0 242.0 12.0 False None None False None False 2904.0 0 2794872 89575 None code100 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. vol 2 P 128/14.31. No 1068.1 1068.1 12.0 False None None False None False 12817.2 0 2794873 89575 None code101 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Sl.No 14.1.1 Page No.123 Volume II No 4670.6 4670.6 12.0 False None None False None False 56047.2 0 2794874 89575 None code102 Providing and fixing CI Nahani trap of approved make confirming to ISI specifications constructions of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). P 88/12.113.1 ,do 10cms x 7.5cm No 275.0 275.0 50.0 False None None False None False 13750.0 0 2794875 89575 None code103 Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100mm dia. P 88/12.111] No 176.0 176.0 50.0 False None None False None False 8800.0 0 2794876 89575 None code104 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..BWSSB SR T130B P 187. No 5474.7 5474.7 12.0 False None None False None False 65696.4 0 2794877 89575 None code105 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x460 mm bowl depth 200 mm Vol 2 P126/14.10.2.2 No 2589.4 2589.4 12.0 False None None False None False 31072.8 0 2794878 89575 None code106 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps vol 2 P 124/14.7.1. No 3141.6 3141.6 12.0 False None None False None False 37699.2 0 2794879 89575 None code107 Supplying and fixing approved make CP 15mm dia master control valve inside the toilets for main control etc., complete with CP wall flanges. Market Rate No 432.0 432.0 16.0 False None None False None False 6912.0 0 2794880 89575 None code108 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 50mm dia., 6 kg/sqcm & class 5 Sl.No 1.3 Page No.127 BWSSB Mtr 103.68 103.68 150.0 False None None False None False 15552.0 0 2794881 89575 None code109 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 25mm dia., 6 kg/sqcm & class 5 Sl.No 1.1 Page No.127 BWSSB Mtr 51.7 51.7 150.0 False None None False None False 7755.0 0 2794882 89575 None code110 Supplying and fixing approved make UPVC multi inlet floor trap with 75mm dia outlet and C.P. cover on top etc., complete with cement concrete support alround the floor trap. Market Rate No 220.0 220.0 60.0 False None None False None False 13200.0 0 2794883 89575 None code111 Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC,perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 230 mm dia. pipes Mtr 881.1 881.1 150.0 False None None False None False 132165.0 0 2794884 89575 None code112 Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (seals according to EN 681 & ASPM 425) The rubber seals joints pipe will have groves in interior of socket and exterior of the spigot. The rubber gasket shall be prefixed at the factory by the manufacturer rigidly with approved glue to have leak proof joint including conveying of pipe to work site and rolling and lowering into trenches, laying true to line, level and perfect linking at joints testing and commissoning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of GSW pipes and specials, with rubber gaskets conforming to EN 681 and ASTM C 425 including cleaning the socket and spigot with soap solution and applying talcum powder for detecting crack, then applying glue and before inserting of rubber gaskets, jacking and fixing in perfect condition including the cost of soap solution, talcum powder and glue etc. and giving necessary hydraulic test to the required pressure of water head with all lead and lifts including costing of jointing materials and all Necessary survey works for laying of sewers etc., and disposal of debris as directed etc., complete. (Contractor will make his own arrangements for procuring water for testing) with Rubber ring gasket joints 100 mm dia. pipes This is for house service connection only Mtr 354.2 354.2 70.0 False None None False None False 24794.0 0 2794885 89575 None code113 Providing and fixing Chorinated poly venyl chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (concelaed work including cutting chases and making good walls) (SRP .99/Item No.13.86.1, 13.86.2,13.86.3).32 mm dia Mtr 403.92 403.92 100.0 False None None False None False 40392.0 0 2794886 89575 None code114 40 mm dia. Mtr 478.5 478.5 150.0 False None None False None False 71775.0 0 2794887 89575 None code115 50 mm dia. Mtr 561.0 561.0 150.0 False None None False None False 84150.0 0 2794888 89575 None code116 Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark.BWSSB P147/16.1 No 460.0 460.0 20.0 False None None False None False 9200.0 0 2794889 89575 None code117 25 mm dia No 1262.52 1262.52 20.0 False None None False None False 25250.4 0 2794890 89575 None code118 32 mm dia No 1471.8 1471.8 20.0 False None None False None False 29436.0 0 2794891 89575 None code119 Wall bores in size stone masonry (Page. 269/ Item No.37.36) ,do upto 60 to 90cm thick P264/37.36.2 No 223.3 223.3 20.0 False None None False None False 4466.0 0 2794892 89575 None code120 Wall bores in Brick masonry upto 45 cm thick. P264/37.36.2 No 205.7 205.7 20.0 False None None False None False 4114.0 0 2794893 89575 None code121 Drilling holes of 10 cms dia (roof/chajja/stone). (Page. 263/ Item No.37.28) No 106.7 106.7 50.0 False None None False None False 5335.0 0 2794894 89575 None code122 KSRB 13 11 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM and testing complete as per specifications. Specification No.KBS 13.22 Sl. No. 13.34, vol 2, First ammenddment Ltr 8.8 8.8 12000.0 False None None False None False 105600.0 0 2794895 89575 None code123 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.Sl.No 14.40.2 Page No.130 Volume II No 418.0 418.0 24.0 False None None False None False 10032.0 0 2794896 89575 None code124 KSRB 12 1.6 : Providing and laying in position to required level or slope 300mm internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of cement mortar in proportion of 1:1, testing of pipes and joints, including cost of materials, labour charges complete as per specifications (Page.70/I.No.11.6) Cum 673.92 673.92 50.0 False None None False None False 33696.0 0 2794897 89575 None code125 Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber.Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe 500) with 3mm thick plastic encapsulation (IS 10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.0 M depth & SFRC cover & frame .BWSSB SR (P188/13.1) No 30718.6 30718.6 2.0 False None None False None False 61437.2 0 2794898 89575 None code126 Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, and hire charges of machinery for cutting, welding, grinding and erection equipments, with all lead and lifts, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the engineer in charge of the work.Vol 2 P26/7.34 Sqm 139.7 139.7 180.0 False None None False None False 25146.0 0 2794899 89575 None code127 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 110mm dia., 6 kg/sqcm & class 3 Sl.No 1.7 Page No.127 BWSSB 110mm Dia Mtr 341.0 341.0 20.0 False None None False None False 6820.0 0 2794900 89575 None code128 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the otherappurtenancesrequired to complete the work as per technical specifications. (The costof steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse Vol 1,P 15/2.2.2.1 aggregates. Cum 10194.0 10194.0 226.4 False None None False None False 2307921.6 0 2794901 89575 None code129 Providing Thermo Mechanically Treated bars of grade Fe 500D ormore Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (Thelaps and wastages shall not be measured separately) Volume 2 ,Page 84/11.32. Quintal 10560.0 10560.0 586.0 False None None False None False 6188160.0 0 2794902 89575 None code130 KSRB 15.3.14 Providing 12mm thick cement plaster in single coat with CM 1:4 to ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.Vol 02 P 42/8.6.1 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the ngineerin Charge Vol 2 P43/8.12 Cum 366.3 366.3 108.0 False None None False None False 39560.4 0 2794903 89575 None code131 Drilling of Borewell Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: 0 to 50 Mtr 247.0 247.0 50.0 False None None False None False 12350.0 0 2794904 89575 None code132 50 to 100 Mtr 309.0 309.0 50.0 False None None False None False 15450.0 0 2794905 89575 None code133 100 to 150 Mtr 329.0 329.0 50.0 False None None False None False 16450.0 0 2794906 89575 None code134 150 to200 Mtr 381.0 381.0 50.0 False None None False None False 19050.0 0 2794907 89575 None code135 200 to250 Mtr 447.0 447.0 50.0 False None None False None False 22350.0 0 2794908 89575 None code136 250 to 300 Mtr 473.0 473.0 50.0 False None None False None False 23650.0 0 2794909 89575 None code137 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M 15%, b) Above 30 M 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/ is to be deducted for Dry Borewell towards yield test Each 5141.0 5141.0 2.0 False None None False None False 10282.0 0 2794910 89575 None code138 Supply of ISI mark 150 mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270 2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387 1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5 7m both ends.threaded conforming to IS 554 1985 one end fixed with socket conforming to IS 4270 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar Medium duty. Mtr 1600.0 1600.0 30.0 False None None False None False 48000.0 0 2794911 89575 None code139 Supplying 150mm CRW collars with all lead and lift. No 100.0 100.0 8.0 False None None False None False 800.0 0 2794912 89575 None code140 Supplying 150mm casing cap with all lead and lift No 100.0 100.0 1.0 False None None False None False 100.0 0 2794913 89575 None code141 Providing laying and jointing 50mm Diameter G.I pipes conforming to IS specification of approved make with fittings such as collars, Bends, Elbows, Tees, Nipples, Plugs with cuts threads using white lead and thread for joints wherever necessary as per directions including all lead and lift et complete (excluding cost of fittings) Pipes (P.79 / 13.6) Mtr 351.92 351.92 280.0 False None None False None False 98537.6 0 2794914 89575 None code142 KSRB13 7.2 2 : Providing and fixing in position 50mm nominal bore non return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. P82/13.60 No 1570.8 1570.8 2.0 False None None False None False 3141.6 0 2794915 89575 None code143 KSRB13 9.1 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kg/sq.cm working pressure 250mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9 (Page.101/Item No.13.71) Mtr 1781.25 1781.25 12.0 False None None False None False 21375.0 0 2794916 89575 None code144 Electrical works Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25mm dia 2mm thick P 1 47/1.1 Mtr 80.0 80.0 1500.0 False None None False None False 120000.0 0 2794917 89575 None code145 19/20mm dia 2mm thick Mtr 68.0 68.0 500.0 False None None False None False 34000.0 0 2794918 89575 None code146 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. P/1 471.3.1 19/20mm dia 2mm thick Mtr 75.0 75.0 300.0 False None None False None False 22500.0 0 2794919 89575 None code147 25mm dia 2mm thick Mtr 80.0 80.0 500.0 False None None False None False 40000.0 0 2794920 89575 None code148 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch box P3 47/2.2.1 Point 251.0 251.0 150.0 False None None False None False 37650.0 0 2794921 89575 None code149 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 361.0 361.0 100.0 False None None False None False 36100.0 0 2794922 89575 None code150 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 542.0 542.0 100.0 False None None False None False 54200.0 0 2794923 89575 None code151 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments. Mtr 26.0 26.0 2000.0 False None None False None False 52000.0 0 2794924 89575 None code152 2.5 sqmm Mtr 40.0 40.0 2000.0 False None None False None False 80000.0 0 2794925 89575 None code153 4 sqmm Mtr 59.0 59.0 1000.0 False None None False None False 59000.0 0 2794926 89575 None code154 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.1 3Way P5 47/3.3 Each 91.0 91.0 72.0 False None None False None False 6552.0 0 2794927 89575 None code155 8Way Each 195.0 195.0 48.0 False None None False None False 9360.0 0 2794928 89575 None code156 10 12Way Each 277.0 277.0 48.0 False None None False None False 13296.0 0 2794929 89575 None code157 16 18Way Each 225.0 225.0 10.0 False None None False None False 2250.0 0 2794930 89575 None code158 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module P5 47/3.5 Each 152.0 152.0 72.0 False None None False None False 10944.0 0 2794931 89575 None code159 8 Module Each 302.0 302.0 48.0 False None None False None False 14496.0 0 2794932 89575 None code160 10 12 Module Each 363.0 363.0 48.0 False None None False None False 17424.0 0 2794933 89575 None code161 16 18Way Each 403.0 403.0 10.0 False None None False None False 4030.0 0 2794934 89575 None code162 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch P/5 47/3.6.1 Each 88.0 88.0 200.0 False None None False None False 17600.0 0 2794935 89575 None code163 6Amps Two way Switch Each 152.0 152.0 100.0 False None None False None False 15200.0 0 2794936 89575 None code164 6Amps 3way socket Each 162.0 162.0 120.0 False None None False None False 19440.0 0 2794937 89575 None code165 Stepped Fan Regulator. Each 313.0 313.0 36.0 False None None False None False 11268.0 0 2794938 89575 None code166 32Amps DP switch Each 375.0 375.0 60.0 False None None False None False 22500.0 0 2794939 89575 None code167 6Amps Bell push Each 159.0 159.0 12.0 False None None False None False 1908.0 0 2794940 89575 None code168 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 32Amps SP P/13 47/5.17 Each 523.0 523.0 72.0 False None None False None False 37656.0 0 2794941 89575 None code169 6 32Amps DP Each 1103.0 1103.0 24.0 False None None False None False 26472.0 0 2794942 89575 None code170 6 32Amps TPN Each 1777.0 1777.0 4.0 False None None False None False 7108.0 0 2794943 89575 None code171 50 63Amps TPN Each 2399.0 2399.0 2.0 False None None False None False 4798.0 0 2794944 89575 None code172 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II Double I Single Door 8 Way SP & N Each 1302.0 1302.0 12.0 False None None False None False 15624.0 0 2794945 89575 None code173 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150mm all round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 2999.7 2999.7 12.0 False None None False None False 35996.4 0 2794946 89575 None code174 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm) P/22 47/6.2.1 Each 2997.0 2997.0 24.0 False None None False None False 71928.0 0 2794947 89575 None code175 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.P/46 47/13.13 Each 702.0 702.0 24.0 False None None False None False 16848.0 0 2794948 89575 None code176 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 10% RPM, Rated air delivery 210 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.48" Sweep 5 Star (1200mm) P/22 47/6.3.1 Each 2085.0 2085.0 36.0 False None None False None False 75060.0 0 2794949 89575 None code177 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.P46 47/13.10 Each 162.0 162.0 36.0 False None None False None False 5832.0 0 2794950 89575 None code178 Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220 240V at 50/60Hz & Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' 20/22 w P/35 47/11.3.2 Each 740.0 740.0 50.0 False None None False None False 37000.0 0 2794951 89575 None code179 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection Min 5KV along with Over voltage/ Overload, short circuit/ miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygreater than1301m/w, nominal CRI greater than75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 70 Watts P/36 47/11.8.3 No 5955.0 5955.0 4.0 False None None False None False 23820.0 0 2794952 89575 None code180 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders P45 47/13.7.1 Each 119.0 119.0 54.0 False None None False None False 6426.0 0 2794953 89575 None code181 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.16SWG P15 47/5.42.2 Sq CM 0.38 0.38 100000.0 False None None False None False 38000.0 0 2794954 89575 None code182 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40x40x6mm P/15 47/5.41.1 Mtr 275.0 275.0 6.0 False None None False None False 1650.0 0 2794955 89575 None code183 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. P14 47/5.38 Each 464.0 464.0 1.0 False None None False None False 464.0 0 2794956 89575 None code184 Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.P/14 47/5.22 Each 407.0 407.0 1.0 False None None False None False 407.0 0 2794957 89575 None code185 Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter without CT P/14 47/5.26 Each 434.0 434.0 1.0 False None None False None False 434.0 0 2794958 89575 None code186 Supplying, fixing and wiring rotary selector switch suitable for Ammeter P/14 47/5.27 Each 178.0 178.0 1.0 False None None False None False 178.0 0 2794959 89575 None code187 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter P/14 47/5.28 Each 146.0 146.0 1.0 False None None False None False 146.0 0 2794960 89575 None code188 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)25mm dia Each 84.0 84.0 4.0 False None None False None False 336.0 0 2794961 89575 None code189 50mm dia Each 255.0 255.0 4.0 False None None False None False 1020.0 0 2794962 89575 None code190 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 sqmm Long Barrel Each 20.0 20.0 16.0 False None None False None False 320.0 0 2794963 89575 None code191 50 sqmm Long Barrel Each 60.0 60.0 8.0 False None None False None False 480.0 0 2794964 89575 None code192 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 25 Sqmm, 3.5 Core, P/9 27/32 Mtr 181.45 181.45 100.0 False None None False None False 18145.0 0 2794965 89575 None code193 3.5 core 50 sqmm Mtr 242.41 242.41 100.0 False None None False None False 24241.0 0 2794966 89575 None code194 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required.In existing trench/duct.25 sqmm to 75 sqmm P/9 14/31.05 Mtr 16.15 16.15 100.0 False None None False None False 1615.0 0 2794967 89575 None code195 95 sqmm to 150 sqmm Mtr 23.64 23.64 100.0 False None None False None False 2364.0 0 2794968 89575 None code196 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1 2, P 7) Cutting road surface Mtr 82.0 82.0 100.0 False None None False None False 8200.0 0 2794969 89575 None code197 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete100Amps 4x30x6mm Aluminium Strips.P15 47/5.40 Mtr 2214.0 2214.0 4.0 False None None False None False 8856.0 0 2794970 89575 None code198 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS 13947. (Icu=lcs)THREE POLE100Amps 25kA.P/12 47/5.14.1 Each 5641.0 5641.0 1.0 False None None False None False 5641.0 0 2794971 89575 None code199 125Amps 25kA. Each 8586.0 8586.0 1.0 False None None False None False 8586.0 0 2794972 89575 None code200 Supplying of on load change over switches 4 poles, AC 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 200Amps P11 47/5.12.4 Each 14417.0 14417.0 1.0 False None None False None False 14417.0 0 2794973 89575 None code201 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. No 4150.0 4150.0 2.0 False None None False None False 8300.0 0 2794974 89575 None code202 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV 100mm P/16 27/49.08 Mtr 1528.0 1528.0 4.0 False None None False None False 6112.0 0 2794975 89575 None code203 Supplying and fixing LT cast Iron pot heads suitable for 1.1KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc 95Sqmm P/10 27/35.02. Each 373.0 373.0 4.0 False None None False None False 1492.0 0 2794976 89575 None code204 HT Cable: Supplying and laying of high tension 11KV cable, Dry Curing & Dry Cooling with true triple extrusion, simultaneously through a single common head, 3 core under ground XLPE (E) cable having stranded compact circular aluminium conductor, screened insulated, insulation screened with extruded semiconducting compound in combination with copper tape, core laid up extruded inner sheathed of GI flat strip armoured and overall PVC sheathed with specified IS 7098/11/85 with latest amendments.3Cx95sqmm P/10 27/36.01 Mtr 1115.61 1115.61 10.0 False None None False None False 11156.1 0 2794977 89575 None code205 Supply, erection, testing and commissioning of 100 KVA 5Star rated Aluminium/Copper wound Distribution Transformer 11 KV/433V with Off Load Tap Switch, Bocholt relay winding temperature indicator, oil temperature indicator, marshalling box with wiring, oil level indicator with 5% to 10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part 1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved.P/4 27/12.06 63 KVA Aluminium Wound 5 Star rated Each 176257.0 176257.0 1.0 False None None False None False 176257.0 0 2794978 89575 None code206 11 KV HT Metering cubicle o different CT ratio,both side cable entry type with 3CT&3PT with transparent cover TTB,with 30x8mm copper bus bar modem& 2 no of meters for 3 phase 4wire metering without load break switch (HT metering box fabricated out of 3mm MS sheet duly epoxy powder coatewd as per revised specification.P/20of27/61.01 No 244780.0 244780.0 1.0 False None None False None False 244780.0 0 2794979 89575 None code207 Supplying erection, testing and commissioning of 3 way 11 kV Load Break Switch with connected accessories and hardware's etc. suitable for outdoor type complete as per latest IS standard and ESCOM approved technical specification. 3 panel LBS. P/12 27/41.01 Each 73632.0 73632.0 1.0 False None None False None False 73632.0 0 2794980 89575 None code208 Supply of 11Mtr Spun Pole including earth work etc,. complete as per the standard technical specification.7/1.07 Each 18140.0 18140.0 1.0 False None None False None False 18140.0 0 2794981 89575 None code209 Erection of 11Mtr long concrete spun pole in a pit of 2.5Mtr depth P2 14/2.05 No 1898.0 1898.0 1.0 False None None False None False 1898.0 0 2794982 89575 None code210 Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification.()1.1 KV Pin InsulaorP2 27/6.01 Each 76.0 76.0 25.0 False None None False None False 1900.0 0 2794983 89575 None code211 Supplying and Fixing of Rabbit Conductor(6/3.15mm Al 6/3.15mm Steel)(34/5.12) Mtr 47.0 47.0 40.0 False None None False None False 1880.0 0 2794984 89575 None code212 Supplying and fixing of Alkathine Tube Of 25mm dia as per standard technical specification Item P17 27/444/55.01 Each 504.0 504.0 50.0 False None None False None False 25200.0 0 2794985 89575 None code213 Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.a)GOS Set 200 Amps Single break P/8 27/184/24.01 Each 9125.0 9125.0 3.0 False None None False None False 27375.0 0 2794986 89575 None code214 c)Horn Gap Fuse Unit (H.G.) set of 3 Nos P/6 27/157/20.01 Each 1032.0 1032.0 1.0 False None None False None False 1032.0 0 2794987 89575 None code215 d)D.O.L.O cut out P/8 27/25.01 Each 5672.0 5672.0 1.0 False None None False None False 5672.0 0 2794988 89575 None code216 e)Lightning Arrestor 9KV 5kA polymeric type. Each 4250.0 4250.0 1.0 False None None False None False 4250.0 0 2794989 89575 None code217 f)H Frame Set Each 4560.0 4560.0 4.0 False None None False None False 18240.0 0 2794990 89575 None code218 Supplying and installing of Dry chemical powder Each 2125.0 2125.0 2.0 False None None False None False 4250.0 0 2794991 89575 None code219 Supplying of Four Bucket stands along with Buckets.(65/6) Each 1200.0 1200.0 2.0 False None None False None False 2400.0 0 2794992 89575 None code220 Supplying of TWO Bucket stands along with Buckets.(65/7) Each 630.0 630.0 2.0 False None None False None False 1260.0 0 2794993 89575 None code221 Rubber Hand gloves 15 kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose P/21 27/541/65.04 Each 1102.0 1102.0 2.0 False None None False None False 2204.0 0 2794994 89575 None code222 Supplying of First Aid BOX.(65/9) Each 215.0 215.0 2.0 False None None False None False 430.0 0 2794995 89575 None code223 Supplying of Safety MASK.(65/10) Each 64.0 64.0 2.0 False None None False None False 128.0 0 2794996 89575 None code224 Supplying of First Aid Chart with Lamination.(65/11) Each 225.0 225.0 2.0 False None None False None False 450.0 0 2794997 89575 None code225 Supplying and fixing of DANGER/NO ADMISSION/NO SMOKING board made out of MS sheet metal with two coats of non corrosive enameled paint..P24 27/660/67.20 Each 146.0 146.0 10.0 False None None False None False 1460.0 0 2794998 89575 None code226 Supplying and installation of RUBBER MAT 10mm ( 3 by 6) .(66/13) Each 1105.0 1105.0 6.0 False None None False None False 6630.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1708758983000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1708758983000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1708758983000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1708759036000 0 None None ELIGIBILITY All terms & condition as per tender notification & KW standard documents. None 1708760903000 0 None None ELIGIBILITY Any misprint in units or specification to be read as per the relevant PWD SR None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Should be valid registered Class-I Civil Contractors / Firms in Karnataka CPWD/MES/KPWD. Others Registration Certificate. createdTs version createdDate modifiedDate documentName None None None None Others -- Registration Certificate. None None None None Work-done Certificate for having satisfactorily completed as a prime contractor for at least one similar nature of work not less than 50% of amount put to tender in last previous five years in any of the Government / Public Sector Undertaking i.e. (2018-19, 2019-20, 2020-21 , 2021-22 & 2022-23).ie,Rs.239.05 Lakhs Others Workdone certificate createdTs version createdDate modifiedDate documentName None None None None Others -- Workdone certificate None None None None Executed in any one financial year, (ie. during the years (2018-19, 2019-20, 2020-21, 2021-22 & 2022-23) the following minimum quantities of work in any of the Government / Public Sector Undertaking. Others Quantity workdone certificate createdTs version createdDate modifiedDate documentName None None None None Others -- Quantity workdone certificate None None None None Should have achieved in at least two financial years a minimum financial turn over (in all classes of Civil Engineering Construction works only) usually not less than two times the amount put to tender pertaining to works out of five financial years. (2018-19, 2019-20, 2020-21, 2021-22 & 2022-23). ie,Rs.956.22 Lakhs Others Turnover certificate createdTs version createdDate modifiedDate documentName None None None None Others -- Turnover certificate None None None None Liquid assets and availability of credit facilities of not less than 30 % of the equivalent of the amount put to tender. ie,Rs.143.43 Lakhs Others Line of credit createdTs version createdDate modifiedDate documentName None None None None Others -- Line of credit None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Others Bid Capacity createdTs version createdDate modifiedDate documentName None None None None Others -- Bid Capacity None None None None Tenderer should demonstrate having the following Plants & Machineries Others Tenderer should demonstrate having the following Plants & Machineries createdTs version createdDate modifiedDate documentName None None None None Others -- Tenderer should demonstrate having the following Plants & Machineries
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1708950723000 version 0 createdDate None modifiedDate None blockNumber Executive Engineer, BMTC Central Office, KH.Road, Bangalore street None city Bangalore state Karnataka pin 560027
tenderRecallDTO	None