2829749 | 91570 | None | code01 | Material charges : Supply of End cap for 50/70 Sq.mm | No | 25.3 | 25.3 | 50.0 | False | None | None | False | None | False | 1265.0 | 0 |
2829750 | 91570 | None | code02 | Dead End clamp / Anchor clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of pole clamp and eye hook | No | 167.2 | 167.2 | 20.0 | False | None | None | False | None | False | 3344.0 | 0 |
2829751 | 91570 | None | code03 | Supply of T-Connector KZ3-95 | No | 431.2 | 431.2 | 50.0 | False | None | None | False | None | False | 21560.0 | 0 |
2829752 | 91570 | None | code04 | Supply of Piercing connector suitable for 16 Sqmm - 95
Sqmm AB Cable - Service Connections | No | 291.5 | 291.5 | 336.0 | False | None | None | False | None | False | 97944.0 | 0 |
2829753 | 91570 | None | code05 | Cable Covering Tiles 125x250x40 mm | Packet | 11280.5 | 11280.5 | 0.68 | False | None | None | False | None | False | 7670.74 | 0 |
2829754 | 91570 | None | code06 | River Sand | CUBIC METER | 1940.4 | 1940.4 | 25.0 | False | None | None | False | None | False | 48510.0 | 0 |
2829755 | 91570 | None | code07 | 11KV, 3 Core, XLPE HTUG Cable (Round Armoured)-95 Sqmm | Km | 978632.6 | 978632.6 | 0.28 | False | None | None | False | None | False | 274017.128 | 0 |
2829756 | 91570 | None | code08 | Transparent Alkathine tube 19mm dia, 2mm thick in coils of
30 mtrs | Coil | 568.7 | 568.7 | 2.0 | False | None | None | False | None | False | 1137.4 | 0 |
2829757 | 91570 | None | code09 | 11KV G.O.S 200A Single Break | Set | 10396.1 | 10396.1 | 6.0 | False | None | None | False | None | False | 62376.6 | 0 |
2829758 | 91570 | None | code10 | H-Frame Set for 11KV, 200Amps Single Break GOS Mounting-GI | Set | 6678.1 | 6678.1 | 6.0 | False | None | None | False | None | False | 40068.6 | 0 |
2829759 | 91570 | None | code11 | Conductor Rabbit ACSR | Km | 50857.4 | 50857.4 | 0.06 | False | None | None | False | None | False | 3051.444 | 0 |
2829760 | 91570 | None | code12 | LT 2 Pin X Arms GI | No | 190.3 | 190.3 | 42.0 | False | None | None | False | None | False | 7992.6 | 0 |
2829761 | 91570 | None | code13 | Spun Pole Structure kit | Set | 37879.6 | 37879.6 | 2.0 | False | None | None | False | None | False | 75759.2 | 0 |
2829762 | 91570 | None | code14 | Spiral Earth Electrode | No | 262.9 | 262.9 | 25.0 | False | None | None | False | None | False | 6572.5 | 0 |
2829763 | 91570 | None | code15 | MS Bolts & Nuts of Size 16 x 40mm | MT | 107619.6 | 107619.6 | 0.06 | False | None | None | False | None | False | 6457.176 | 0 |
2829764 | 91570 | None | code16 | 11KV Cross arm with HT top Support (glass reinforced hot pressed SMC compound) | No | 790.9 | 790.9 | 2.0 | False | None | None | False | None | False | 1581.8 | 0 |
2829765 | 91570 | None | code17 | Pole clamp for HT/LT AB Cables | No | 119.9 | 119.9 | 42.0 | False | None | None | False | None | False | 5035.8 | 0 |
2829766 | 91570 | None | code18 | RCC Pole-9.0 mtrs long, 145kg WL | No | 7783.6 | 7783.6 | 42.0 | False | None | None | False | None | False | 326911.2 | 0 |
2829767 | 91570 | None | code19 | LT Metering Box for housing the ETV Meters without CT's busbar wiring etc., | No | 4008.4 | 4008.4 | 2.0 | False | None | None | False | None | False | 8016.8 | 0 |
2829768 | 91570 | None | code20 | Measuring Equipments-LT Three Phase, 4wire, CT Operated DLMS Complaint ETV meter-5A, class 0.5s Accracy | No | 3735.6 | 3735.6 | 2.0 | False | None | None | False | None | False | 7471.2 | 0 |
2829769 | 91570 | None | code21 | Pre-stressed Tubular Spun Pole 11 Mtrs Long | No | 19472.2 | 19472.2 | 2.0 | False | None | None | False | None | False | 38944.4 | 0 |
2829770 | 91570 | None | code22 | LT Distribution box for 100/250 KVA DTC with MCCB's (SMC) | No | 26870.8 | 26870.8 | 2.0 | False | None | None | False | None | False | 53741.6 | 0 |
2829771 | 91570 | None | code23 | Supply of PVC insulated wire 25 Sq.mm | m | 5206.3 | 5206.3 | 22.0 | False | None | None | False | None | False | 114538.6 | 0 |
2829772 | 91570 | None | code24 | H.G.Fuse unit 11KV Class with solid core insulators | Set of 3 Nos | 1175.9 | 1175.9 | 2.0 | False | None | None | False | None | False | 2351.8 | 0 |
2829773 | 91570 | None | code25 | Grounding Materials for RMU's & Transformers Good quality salt for grounding purposes packed in 50kg guny bags | Bag | 341.0 | 341.0 | 10.0 | False | None | None | False | None | False | 3410.0 | 0 |
2829774 | 91570 | None | code26 | 11kv Pin insulator (G.I pin only) | No | 72.6 | 72.6 | 6.0 | False | None | None | False | None | False | 435.6 | 0 |
2829775 | 91570 | None | code27 | Supply of cable straight thru joint kits suitable for 95 | No | 463.1 | 463.1 | 5.0 | False | None | None | False | None | False | 2315.5 | 0 |
2829776 | 91570 | None | code28 | Grounding Materials for RMU's & Transformers Good quality salt for grounding purposes packed in non returnable gunny bags of 30kg each | No | 743.6 | 743.6 | 10.0 | False | None | None | False | None | False | 7436.0 | 0 |
2829777 | 91570 | None | code29 | Grounding Materials for RMUs & Transformers GI grounding pipe, B Class, 40mm dia, 2.5mtrs long, 2.9mm thick with bolts nuts, GI Strips and washers complete | No | 817.3 | 817.3 | 10.0 | False | None | None | False | None | False | 8173.0 | 0 |
2829778 | 91570 | None | code30 | 11kv ceramic Pin insulator (Shell only) | No | 91.3 | 91.3 | 6.0 | False | None | None | False | None | False | 547.8 | 0 |
2829779 | 91570 | None | code31 | Stringing of 1.1 KV Class 3 Phase Aerial Bunch cable of size 3x95+1x16+1x70 Sq.mm | Km | 543500.1 | 543500.1 | 1.0 | False | None | None | False | None | False | 543500.1 | 0 |
2829780 | 91570 | None | code32 | Caution / Danger Board | No | 165.0 | 165.0 | 2.0 | False | None | None | False | None | False | 330.0 | 0 |
2829781 | 91570 | None | code33 | Eye Hook (Flat Type) for fixing clamps | No | 112.2 | 112.2 | 40.0 | False | None | None | False | None | False | 4488.0 | 0 |
2829782 | 91570 | None | code34 | Supply of piercing connector suitable for 16 sq.mm-95 Sq.mm AB Cable-Street light connections | No | 204.6 | 204.6 | 186.0 | False | None | None | False | None | False | 38055.6 | 0 |
2829783 | 91570 | None | code35 | LT 4 Pin x Arms -GI | No | 416.9 | 416.9 | 42.0 | False | None | None | False | None | False | 17509.8 | 0 |
2829784 | 91570 | None | code36 | BEE 5 star Rated Distribution Transformer, 3 Phase, 11KV / 433V(Amorphous Core) with oil 250KVA | No | 558459.0 | 558459.0 | 2.0 | False | None | None | False | None | False | 1116918.0 | 0 |
2829785 | 91570 | None | code37 | GI Pipes B-Class / GI Pipe-100mm dia | Mtr | 1680.8 | 1680.8 | 16.0 | False | None | None | False | None | False | 26892.8 | 0 |
2829786 | 91570 | None | code38 | Route & Joint indicating stone with M.s Anchor rod | No | 146.3 | 146.3 | 40.0 | False | None | None | False | None | False | 5852.0 | 0 |
2829787 | 91570 | None | code39 | Collars for RCC hume pipe 150mm dia | No | 90.2 | 90.2 | 8.0 | False | None | None | False | None | False | 721.6 | 0 |
2829788 | 91570 | None | code40 | RCC hume pipes 2000mm long 150mm dia | No | 337.7 | 337.7 | 12.0 | False | None | None | False | None | False | 4052.4 | 0 |
2829789 | 91570 | None | code41 | Heat Shrinkable Type Transition Jointing Kit for XLPE Cable
3x95 Sqmm | Set | 4473.7 | 4473.7 | 4.0 | False | None | None | False | None | False | 17894.8 | 0 |
2829790 | 91570 | None | code42 | Heat Shrinkable Straight Through Jointing Kits for XLPE Cable with Copper Lugs & Al Ferrules
3x95 Sqmm | Set | 8042.1 | 8042.1 | 2.0 | False | None | None | False | None | False | 16084.2 | 0 |
2829791 | 91570 | None | code43 | Heavy duty Copper terminals long barrel / 240 Sq.mm Copper terminals | No | 141.9 | 141.9 | 150.0 | False | None | None | False | None | False | 21285.0 | 0 |
2829792 | 91570 | None | code44 | L.T.Current Transformers / CT Ratio-400/5A, Class-0.5 accuracy, 3.75 VA, Ring type | No | 641.3 | 641.3 | 8.0 | False | None | None | False | None | False | 5130.4 | 0 |
2829793 | 91570 | None | code45 | LT Three phase Four Wire 5-30A Thread through type composite Meter Housing Box consisting of ETV Meter with AMR complice and LTCT with built in GSM/GPRS modem (as per technical specification ) upto 100kVA Distribution Transformer. | No | 19772.5 | 19772.5 | 2.0 | False | None | None | False | None | False | 39545.0 | 0 |
2829794 | 91570 | None | code46 | LT Spacer for TC Wiring | No | 46.2 | 46.2 | 32.0 | False | None | None | False | None | False | 1478.4 | 0 |
2829795 | 91570 | None | code47 | P.G. Clamps Rabbit to insulated wire / 240 Sq.mm | No | 451.0 | 451.0 | 16.0 | False | None | None | False | None | False | 7216.0 | 0 |
2829796 | 91570 | None | code48 | Heavy duty Copper terminals long barrel / 240 Sq.mm Copper terminals | No | 390.5 | 390.5 | 48.0 | False | None | None | False | None | False | 18744.0 | 0 |
2829797 | 91570 | None | code49 | Service Connection accessories / FGRP Aerial fuse boards 30A-6 way | No | 1218.8 | 1218.8 | 92.0 | False | None | None | False | None | False | 112129.6 | 0 |
2829798 | 91570 | None | code50 | Labour Charges: Installation of Insulation piercing connector for main to street light Main : 16-95sqmm, Tap : 1.5-10sqmm(EP95) | No | 99.0 | 99.0 | 42.0 | False | None | None | False | None | False | 4158.0 | 0 |
2829799 | 91570 | None | code51 | Fixing of GOS including wiring (11KV SB 200A) | Set | 1214.4 | 1214.4 | 6.0 | False | None | None | False | None | False | 7286.4 | 0 |
2829800 | 91570 | None | code52 | Stringing of ACSR Rabbit conductor, binding of conductor on each insulator and dead ending on strain or disc / strain insulator by means of clamps | Km | 4797.1 | 4797.1 | 0.06 | False | None | None | False | None | False | 287.826 | 0 |
2829801 | 91570 | None | code53 | Fixing of Cable straight thru joint kits suitable for 95 | No | 1566.4 | 1566.4 | 5.0 | False | None | None | False | None | False | 7832.0 | 0 |
2829802 | 91570 | None | code54 | Fixing of T-Connector KZ3 95 for AB cable works | No | 246.4 | 246.4 | 50.0 | False | None | None | False | None | False | 12320.0 | 0 |
2829803 | 91570 | None | code55 | Providing coping for pole with CC 1:2:4 (As per actuals) 390mm all around the pole for an height o f 300mm for Spun poles | Each | 2442.0 | 2442.0 | 2.0 | False | None | None | False | None | False | 4884.0 | 0 |
2829804 | 91570 | None | code56 | Providing cement concrete to pole base 11mtr spun pole (1000x1000x150mm) with CC 1:4:8(includes material and labour including necessary curing etc., (cost does not include excavation) | Each | 924.0 | 924.0 | 2.0 | False | None | None | False | None | False | 1848.0 | 0 |
2829805 | 91570 | None | code57 | Providing cement concrete to pole base 11mtr spun pole (1000x1000x2500mm) with CC 1:2:4 (without coping)(includes material and labour including necessary curing etc., (cost does not include excavation) | Each | 15404.4 | 15404.4 | 2.0 | False | None | None | False | None | False | 30808.8 | 0 |
2829806 | 91570 | None | code58 | Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm for UG cable works (sand charges are separate) | Km | 16291.0 | 16291.0 | 0.28 | False | None | None | False | None | False | 4561.48 | 0 |
2829807 | 91570 | None | code59 | UG Cable Work: Refilling the cable trenches with selected available earth from trench excavation
including watering, consolidation in layers of 15 cm. Thickness including
depositing of the surplus earth with a lead of 200 Mtrs. | CUBIC METER | 63.8 | 63.8 | 154.0 | False | None | None | False | None | False | 9825.2 | 0 |
2829808 | 91570 | None | code60 | Errction of RCC poles 9 mtr with 145 kg WL (As per Cost data sheet 6) | No | 1316.7 | 1316.7 | 42.0 | False | None | None | False | None | False | 55301.4 | 0 |
2829809 | 91570 | None | code61 | Fixing one Circuit of LT Wiring for - 250/500 KVA Transformers via metering box | No | 1357.4 | 1357.4 | 4.0 | False | None | None | False | None | False | 5429.6 | 0 |
2829810 | 91570 | None | code62 | Fixing DOLO cutouts / Horn Gap Fuses including fixing of cross arms and wiring | Each | 260.7 | 260.7 | 2.0 | False | None | None | False | None | False | 521.4 | 0 |
2829811 | 91570 | None | code63 | Digging of pit for providing GI Pipe type earthing in ordinary soil | No | 834.9 | 834.9 | 6.0 | False | None | None | False | None | False | 5009.4 | 0 |
2829812 | 91570 | None | code64 | Making and fixing of Heat shrinkable type pot head for 3x95 to 3x150 Sq.mm HT UG Cable only | No | 2923.8 | 2923.8 | 4.0 | False | None | None | False | None | False | 11695.2 | 0 |
2829813 | 91570 | None | code65 | Covering cable with tiles for UG cable works | Km | 3621.2 | 3621.2 | 0.3 | False | None | None | False | None | False | 1086.36 | 0 |
2829814 | 91570 | None | code66 | Earth work excavation for cable trench of 0.5 to 0.75 mtr. Width and Depth upto 1
mtr. including trial pits, depositing on bank upto a lead o f 50 mtrs, Supplying and
Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign
Boards at every 100mtrs wherever necessary as directed.
181 22.1.1 In Ordinary Soil | CUBIC METER | 286.0 | 286.0 | 168.0 | False | None | None | False | None | False | 48048.0 | 0 |
2829815 | 91570 | None | code67 | Fixing of 4 Pin Cross arm with insulator and Braces | Each | 176.0 | 176.0 | 42.0 | False | None | None | False | None | False | 7392.0 | 0 |
2829816 | 91570 | None | code68 | Providing spiral earth electrode type earthing along with pole (without charcol, salt etc.,) | No | 102.3 | 102.3 | 42.0 | False | None | None | False | None | False | 4296.6 | 0 |
2829817 | 91570 | None | code69 | Digging of Pits 1.8 mtr depth for errection of 9 to 10 mtr Long Steel/RCC/PSC
supports as per approved Drawing. Ordinary Soil | No | 691.9 | 691.9 | 42.0 | False | None | None | False | None | False | 29059.8 | 0 |
2829818 | 91570 | None | code70 | Erection of 11 mtr long Consrete spun pole in apit of 2.5 mtr depth, alinging refilling with soil and ramming | No | 1337.6 | 1337.6 | 2.0 | False | None | None | False | None | False | 2675.2 | 0 |
2829819 | 91570 | None | code71 | Digging of pit 2.5 mtr depth for errection of 11mtr long tubular spun pole as per approved drawing in Ordinary soil | No | 2095.5 | 2095.5 | 2.0 | False | None | None | False | None | False | 4191.0 | 0 |
2829820 | 91570 | None | code72 | Fixing of 2 pin Cross Arm | Each | 176.0 | 176.0 | 42.0 | False | None | None | False | None | False | 7392.0 | 0 |
2829821 | 91570 | None | code73 | Erection of 200-250 KVA Transformer on Transformer Structure | Each | 2505.8 | 2505.8 | 2.0 | False | None | None | False | None | False | 5011.6 | 0 |
2829822 | 91570 | None | code74 | Laying of 3x95 to 150 Sq.mm HT UG cable in Existing trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as
directed by the departmental staff. | Km | 67454.2 | 67454.2 | 0.28 | False | None | None | False | None | False | 18887.176 | 0 |
2829823 | 91570 | None | code75 | Heat shrinkable straight through joint
for 3x95 to 3x150 sq.mm HT UG Cable | No | 3132.8 | 3132.8 | 2.0 | False | None | None | False | None | False | 6265.6 | 0 |
2829824 | 91570 | None | code76 | Stringing of 1.1kV grade aerial bunched 3 core cable of XLPE insulation standard aluminum conductor, standard around a weather resistant black XLPE insulated AAA messenger wire (3x95) (for Phase conductor) + (1x70) (insulated messenger
neutral) + (1x16) street light control. | Km | 36419.9 | 36419.9 | 1.0 | False | None | None | False | None | False | 36419.9 | 0 |
2829825 | 91570 | None | code77 | Construction of platform with size stone, cement concert for erection o f 500 kVA Transformer/Metering cubicle/Heavy Equipment. Construction o f platform (1.5x1.5x1.2) mtr in size stone, for erection of transformers/Heavy equipment including all materials, labour. Excavation of (1.5x1.5x1) mt pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 1cm thick layers, well compacted curing etc.,
complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement morter 1:6 cutting complete providing pointing to stone masonary in cement morter 1:3 after racking oint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely. | CUBIC METER | 33397.1 | 33397.1 | 2.0 | False | None | None | False | None | False | 66794.2 | 0 |
2829826 | 91570 | None | code78 | Fixing of Pole clmps | No | 176.0 | 176.0 | 42.0 | False | None | None | False | None | False | 7392.0 | 0 |
2829827 | 91570 | None | code79 | Installation of Insulation piercing connector for main to Service linemain : 16-95Sqmm,TAP: 4-35Sqmm (P2x95) for AB Cable works | No | 140.8 | 140.8 | 114.0 | False | None | None | False | None | False | 16051.2 | 0 |
2829828 | 91570 | None | code80 | Supervision Charges | No | 215892.0 | 215892.0 | 1.0 | False | None | None | False | None | False | 215892.0 | 0 |
2829829 | 91570 | None | code81 | Layman Charges | No | 215892.0 | 215892.0 | 1.0 | False | None | None | False | None | False | 215892.0 | 0 |
2829830 | 91570 | None | code82 | CT Test | No | 20000.0 | 20000.0 | 1.0 | False | None | None | False | None | False | 20000.0 | 0 |
2829831 | 91570 | None | code83 | Earthing:Supplying, fixing, wiring, earth electrode for grounding conduits,I.C. cutout sand other equipment's onthe mete rboard using 40 mm dia 2.90 mm thick GIpipe 2.5m long buried in a pit.The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc.,is to be established through GI wire of size as per lSI specification 7.3.3.of IS732 using 12mm dia bolts, nuts, washer sand check nuts etc., the pipe shall have 16 through holes of 12 mm dia | Nos | 3861.0 | 3861.0 | 334.0 | False | None | None | False | None | False | 1289574.0 | 0 |
2829832 | 91570 | None | code84 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. | Km | 69746.0 | 69746.0 | 10.02 | False | None | None | False | None | False | 698854.92 | 0 |
2829833 | 91570 | None | code85 | Fixing of pot heads : Supplying and fixing LT cast iron pot-heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts and nuts & washers etc., | Nos | 275.0 | 275.0 | 334.0 | False | None | None | False | None | False | 91850.0 | 0 |
2829834 | 91570 | None | code86 | Supplying&fixingofPorcelainfusechannelwithcutoutonexisting wooden/panel using necessary nuts, bolts and washers. | Nos | 172.7 | 172.7 | 334.0 | False | None | None | False | None | False | 57681.8 | 0 |
2829835 | 91570 | None | code87 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898.. 6-32 A SP | Nos | 456.5 | 456.5 | 334.0 | False | None | None | False | None | False | 152471.0 | 0 |
2829836 | 91570 | None | code88 | Platform for TC & Street Lights: Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD Common SR 2023-24,Volume-I Item No. - 1.4, Page No.5) | Sqm | 266.2 | 266.2 | 6.48 | False | None | None | False | None | False | 1724.976 | 0 |
2829837 | 91570 | None | code89 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD Common SR - 2023-2024 - Volmn I - Item No.2.1.4, Page No. 15) | CUBIC METER | 6230.4 | 6230.4 | 0.65 | False | None | None | False | None | False | 4049.76 | 0 |
2829838 | 91570 | None | code90 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR - 2023-2024 - Volumn I - Item No.8.30, Page No. 46) | CUBIC METER | 7027.9 | 7027.9 | 9.45 | False | None | None | False | None | False | 66413.655 | 0 |
2829839 | 91570 | None | code91 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR - 2023-2024 - Volmn I - Item No.2.1.6, Page No. 15) | CUBIC METER | 6867.3 | 6867.3 | 0.45 | False | None | None | False | None | False | 3090.285 | 0 |
2829840 | 91570 | None | code92 | Providing Raised and cut pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.. (PWD Common SR 2023-24,Volume-II Item No. - 8.19.2, Page No.44) | Sqm | 509.3 | 509.3 | 14.4 | False | None | None | False | None | False | 7333.92 | 0 |
2829841 | 91570 | None | code93 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specificationsand as per directions of Engineer-in-charge. (PWD Common SR 2023-24,Volume-II Item No. - 8.2.1, Page No.41) | Sqm | 324.5 | 324.5 | 5.7 | False | None | None | False | None | False | 1849.65 | 0 |
2829842 | 91570 | None | code94 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin- charge. (Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade) (PWD Common SR 2023-24,Volume-II Item No. - 11.59, Page No.41) | Sqm | 925.1 | 925.1 | 70.0 | False | None | None | False | None | False | 64757.0 | 0 |
2829843 | 91570 | None | code95 | Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT steel rods and 6 mm dia stirups at 15 cm c/c fixed 1.5 m above Ground level using steel moulding , curing , transportation to work spot including excavation in all types of soil, fixing in plain cement concrete M15 using 20 mm downsize aggregate including aligning to plumb and line providing including cost of all materials, labour,usage charges of machinery complete. (PWD Common SR 2023-24,Volume-II Item No. - 11.62, Page No.96) | Each | 1193.5 | 1193.5 | 8.0 | False | None | None | False | None | False | 9548.0 | 0 |
2829844 | 91570 | None | code96 | Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm
including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineerin- charge of works as per the standard procedure. (PWD Common SR 2023-24,Volume-VI Item No. - 1, Page No.158) | Each | 1950.3 | 1950.3 | 2.0 | False | None | None | False | None | False | 3900.6 | 0 |
2829845 | 91570 | None | code97 | Supply of LED Street light luminaire with pressure diecasta luminium housing body for optimal thermaldissipation.Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs50000hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K,IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, Surge Protection Min5KV along with Overvoltage /Overload, shortcircuit/miss wiring protection. Compatible for pole mounting with outerdia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hzapplication. Compliance to IS10322/IEC60598, LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools.LED Light fixture with 120 W System Power consumption.LED Efficiency 1301m/w, nominalCRI 75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark/ name shall be Engraved/Embossing on the diecasthousing/Bodypart. Warranty of 2 Years against any manufacturing defectworking under standard electrical conditions as mentioned above should be given byLED manufacturer &Cree/Nichia/Lumileds/Osram make LED Source.LED Streetlight 120 W | Each | 11066.0 | 11066.0 | 50.0 | False | None | None | False | None | False | 553300.0 | 0 |
2829846 | 91570 | None | code98 | Additional Works for Building: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
specifications and as per directions of Engineer in charge | Sqm | 110.0 | 110.0 | 25429.37 | False | None | None | False | None | False | 2797230.7 | 0 |
2829847 | 91570 | None | code99 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge | CUBIC METER | 58.3 | 58.3 | 25429.37 | False | None | None | False | None | False | 1482532.271 | 0 |
2829848 | 91570 | None | code100 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-100 mm nominal dia Pipes | m | 1023.0 | 1023.0 | 1122.2 | False | None | None | False | None | False | 1148010.6 | 0 |
2829849 | 91570 | None | code101 | Providing and applying floor painting with ready mix paint in two coats ( exluding priming coat ) on new concrete / asbestos cement sheet / plastered surfaces brushing to give an even shade after preparing the surface after throughly cleaning oil, dirt, dust other foreign matter and sand papering including cost of materials, labour, complete as per specifications. | Sqm | 55.97 | 55.97 | 4565.73 | False | None | None | False | None | False | 255543.9081 | 0 |
2829850 | 91570 | None | code102 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M15 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Sqm | 6838.7 | 6838.7 | 281.46 | False | None | None | False | None | False | 1924820.502 | 0 |
2829851 | 91570 | None | code103 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. | Sqm | 898.7 | 898.7 | 5629.11 | False | None | None | False | None | False | 5058881.157 | 0 |