| 2828533 | 91534 | None | Item 1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth | Cum | 106.4 | 106.4 | 55.71 | False | None | None | False | None | False | 5927.544 | 0 |
| 2828534 | 91534 | None | item 2 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | Cum | 1122.24 | 1122.24 | 1.01 | False | None | None | False | None | False | 1133.4624 | 0 |
| 2828535 | 91534 | None | item 3 | Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin- charge | Cum | 1328.32 | 1328.32 | 2.1 | False | None | None | False | None | False | 2789.472 | 0 |
| 2828536 | 91534 | None | Item 4 | Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. | Cum | 1335.04 | 1335.04 | 1.35 | False | None | None | False | None | False | 1802.304 | 0 |
| 2828537 | 91534 | None | Item 5 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1378.72 | 1378.72 | 15.92 | False | None | None | False | None | False | 21949.2224 | 0 |
| 2828538 | 91534 | None | Item 06 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 409.92 | 409.92 | 31.84 | False | None | None | False | None | False | 13051.8528 | 0 |
| 2828539 | 91534 | None | Item 7 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay (non modular) bricks of class designation 3.5 | No | 1910.72 | 1910.72 | 7.0 | False | None | None | False | None | False | 13375.04 | 0 |
| 2828540 | 91534 | None | Item 8 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. | Cum | 7133.88 | 7133.88 | 4.22 | False | None | None | False | None | False | 30104.9736 | 0 |
| 2828541 | 91534 | None | item 9 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handlin charges including encasing the pipe around to a depth not less than15 cms with gravel or selected earth available from the excavation etc. complet 160mm(weight of pipe -2.753 kg) 4 Kg/m2: | m | 547.68 | 547.68 | 159.0 | False | None | None | False | None | False | 87081.12 | 0 |
| 2828542 | 91534 | None | Item 10 | Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark withits latest amendments 160 mm dia PVC Elbows | No | 527.52 | 527.52 | 6.0 | False | None | None | False | None | False | 3165.12 | 0 |
| 2828543 | 91534 | None | item 11 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and ommissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 32mm dia., 10 kg/sqcm & class 5 | m | 75.04 | 75.04 | 300.0 | False | None | None | False | None | False | 22512.0 | 0 |
| 2828544 | 91534 | None | Item 12 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and ommissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 32mm dia., 10 kg/sqcm & class 5 ,PVC pipes 110mm dia., 6 kg/sqcm & class 3 | m | 460.32 | 460.32 | 100.0 | False | None | None | False | None | False | 46032.0 | 0 |
| 2828545 | 91534 | None | Item 13 | Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments-32 mm dia PVC Elbows | No | 23.52 | 23.52 | 48.0 | False | None | None | False | None | False | 1128.96 | 0 |
| 2828546 | 91534 | None | Item 14 | Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments-110 mm dia PVC Elbows | No | 338.24 | 338.24 | 10.0 | False | None | None | False | None | False | 3382.4 | 0 |
| 2828547 | 91534 | None | Item 15 | Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments-32 mm dia PVC TEE | No | 35.84 | 35.84 | 56.0 | False | None | None | False | None | False | 2007.04 | 0 |
| 2828548 | 91534 | None | Item 16 | Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments-110 mm dia PVC TEE | No | 338.24 | 338.24 | 5.0 | False | None | None | False | None | False | 1691.2 | 0 |
| 2828549 | 91534 | None | Item 17 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm | No | 2610.72 | 2610.72 | 4.0 | False | None | None | False | None | False | 10442.88 | 0 |
| 2828550 | 91534 | None | Item 18 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | No | 1292.48 | 1292.48 | 2.0 | False | None | None | False | None | False | 2584.96 | 0 |
| 2828551 | 91534 | None | Item 19 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid | No | 6694.24 | 6694.24 | 6.0 | False | None | None | False | None | False | 40165.44 | 0 |
| 2828552 | 91534 | None | Item 20 | Providing and fixing C.P. Brass bibcock 15 mm | No | 504.0 | 504.0 | 30.0 | False | None | None | False | None | False | 15120.0 | 0 |
| 2828553 | 91534 | None | Item 21 | Providing and fixing C.P. Brass stop cock (concealed) 15 mm | No | 558.0 | 558.0 | 12.0 | False | None | None | False | None | False | 6696.0 | 0 |
| 2828554 | 91534 | None | Item 22 | Providing and fixing, SS Overhead rain showers - Economy | No | 896.0 | 896.0 | 2.0 | False | None | None | False | None | False | 1792.0 | 0 |
| 2828555 | 91534 | None | Item 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3209.92 | 3209.92 | 6.0 | False | None | None | False | None | False | 19259.52 | 0 |
| 2828556 | 91534 | None | Item 24 | Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing
the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor
will make his own arrangements for procuring water for testing) etc. complete for:Pipes of SN4, 160mm dia. | m | 645.12 | 645.12 | 40.0 | False | None | None | False | None | False | 25804.8 | 0 |
| 2828557 | 91534 | None | Item 25 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7664.16 | 7664.16 | 1.069 | False | None | None | False | None | False | 8192.98704 | 0 |
| 2828558 | 91534 | None | Item 26 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and technical specification, All other type of structures | MT | 88492.32 | 88492.32 | 0.136 | False | None | None | False | None | False | 12034.95552 | 0 |
| 2828559 | 91534 | None | Item 27 | Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Roads & Bridges depending upon the type of structure.Cement Concrete Drain Walls-35% | No | 2866.87 | 2866.87 | 1.0 | False | None | None | False | None | False | 2866.87 | 0 |
| 2828560 | 91534 | None | Item 28 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. | Each | 552.52 | 552.52 | 2.0 | False | None | None | False | None | False | 1105.04 | 0 |
| 2828561 | 91534 | None | Item 29 | Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Economy | Each | 555.52 | 555.52 | 2.0 | False | None | None | False | None | False | 1111.04 | 0 |
| 2828562 | 91534 | None | Item 30 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below(tolerance mm)with wall thickness 2.0mm 0.2 mm, corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm 0.1 mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge 42x50mm PVC Extruded section | m | 267.68 | 267.68 | 60.0 | False | None | None | False | None | False | 16060.8 | 0 |
| 2828563 | 91534 | None | Item 31 | Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin,
moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate
for panels conforming to IS: 14856, including fixing to frames. 35 mm thickness | Sqm | 4071.2 | 4071.2 | 25.2 | False | None | None | False | None | False | 102594.24 | 0 |
| 2828564 | 91534 | None | Item 32 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 1366.4 | 1366.4 | 6.0 | False | None | None | False | None | False | 8198.4 | 0 |
| 2828565 | 91534 | None | Item 33 | Providing and fixing of Polyethylene water storage tank with cover and suitable locking arrangement | l | 6.72 | 6.72 | 1500.0 | False | None | None | False | None | False | 10080.0 | 0 |
| 2828566 | 91534 | None | Item 34 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 632.8 | 632.8 | 130.15 | False | None | None | False | None | False | 82358.92 | 0 |
| 2828567 | 91534 | None | Item 35 | Providing and fixing Name board | No | 2000.0 | 2000.0 | 2.0 | False | None | None | False | None | False | 4000.0 | 0 |