| 2812958 | 90680 | None | Comman SR Vol 1 2023 24 INO 1 17 1 PNO 10 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications including setting out construction of shoring strutting barricading caution lights bracing using sight rails & boning rods at every 100 mm whevere necessary as directed removal of stumps and other deleterious matter dressing of sides and levelling the bottom of trench to the extent required utilising the available excavated earth locally for the work etc and all other appurtenances complete in the following strata PWD Comman SR Vol 1 2023 24 Item no 1 17 1 Page No 10 | Cum | 269.86 | 269.86 | 37.91 | False | None | None | False | None | False | 10230.3926 | 0 |
| 2812959 | 90680 | None | PWD SR Vol 3 2023 24 INO 3 1 PNO 17 | Removal of Unserviceable Soil with Disposal up to a suitable distance as directed by the Engineer in charge of work PWD SR Vol 3 2023 24 Item no 3 1 Page No 17 | Cum | 87.55 | 87.55 | 37.91 | False | None | None | False | None | False | 3319.0205 | 0 |
| 2812960 | 90680 | None | PWD SR Vol 3 2023 24 INO 3 1 PNO 17 | Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications Mix 1 4 8 Using 40 mm nominal size graded crushed coarse aggregates PWD SR Vol 01 2023 24 Item no 2 1 2 Page No 15 | Cum | 5833.92 | 5833.92 | 7.25 | False | None | None | False | None | False | 42295.92 | 0 |
| 2812961 | 90680 | None | PWD SR Vol 01 2023 24 INO 2 1 2 PNO 15 | Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading grading to required slope and compacting to meet the requirement complete as per specifications including cost of labour rolling water all materials usage& all other appurtenaces required to complete the work PWD SR Vol 01 2023 24 Item no 1 8 Page No 7 | Cum | 414.06 | 414.06 | 26.53 | False | None | None | False | None | False | 10985.0118 | 0 |
| 2812962 | 90680 | None | PWD SR 2018 19 INO 2 15 | KSRB 2 8 Providing and Filling in foundation with granite trap broken metal 100mm and down size with approved sand including hand packing ramming watering including cost of all materials and labour with all lead and lift complete as per specifications specification No KBS PWD SR 2018 19 Item no 2 15 | Cum | 2207.29 | 2207.29 | 14.01 | False | None | None | False | None | False | 30924.1329 | 0 |
| 2812963 | 90680 | None | PWD Vol 1 SR 2023 24 INO 1 10 PNO 7 | Refilling available earth around trenches pipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1 5 m Including cost of all labour complete as per specifications PWD Vol 1 SR 2023 24 Item no 1 10 Page No 7 | Cum | 164.8 | 164.8 | 10.05 | False | None | None | False | None | False | 1656.24 | 0 |
| 2812964 | 90680 | None | PWD Vol 1 SR 2023 24 INO 2 11a PNO 18 | Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings PWD Vol 1 SR 2023 24 Item No 2 11a Page No 18 | Tonne | 92140.71 | 92140.71 | 1.9 | False | None | None | False | None | False | 175067.349 | 0 |
| 2812965 | 90680 | None | PWD Vol 02 SR 2023 24 INO 6 7 PNO 13 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3 5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 4 1 cement 4 coarse sand including cost of all materials labour scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work PWD Vol 02 SR 2023 24 Item no 6 7 Page No 13 | Cum | 8457.33 | 8457.33 | 23.0 | False | None | None | False | None | False | 194518.59 | 0 |
| 2812966 | 90680 | None | PWD SR Vol 1 2023 24 INO 2 5 2 PNO 16 | Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3 50 m height The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators The cost includes all lead & lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR Vol 1 2023 24 Item no 2 5 2 Page No 16 | Cum | 11154.09 | 11154.09 | 14.84 | False | None | None | False | None | False | 165526.6956 | 0 |
| 2812967 | 90680 | None | PWD SR Vol 1 2023 24 INO 2 5 2 PNO 16 | Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3 50 m height The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators The cost includes all lead & lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR Vol 1 2023 24 Item no 2 5 2 Page No 16 | Cum | 10469.79 | 10469.79 | 8.06 | False | None | None | False | None | False | 84386.5074 | 0 |
| 2812968 | 90680 | None | PWD SR Vol 02 2023 24 INO 8 4 1 PNO 41 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 3 1 cement 3 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge PWD SR Vol 02 2023 24 Item no 8 4 1 Page No 41 | Sqm | 332.69 | 332.69 | 106.6 | False | None | None | False | None | False | 35464.754 | 0 |
| 2812969 | 90680 | None | PWD SR Vol 02 2023 24 INO 8 10 PNO 43 | Providing 6 mm cement plaster with cement mortar 1 3 1 cement 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge PWD SR Vol 02 2023 24 Item no 8 10 Page No 43 | Sqm | 217.33 | 217.33 | 147.45 | False | None | None | False | None | False | 32045.3085 | 0 |
| 2812970 | 90680 | None | PWD SR Vol 02 2023 24 INO 8 5 1 PNO 42 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 3 1 cement 3 fine sand including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge PWD SR Vol 02 2023 24 Item no 8 5 1 Page No 42 | Sqm | 376.98 | 376.98 | 147.45 | False | None | None | False | None | False | 55585.701 | 0 |
| 2812971 | 90680 | None | PWD SR Vol 02 2023 24 INO 8 9 PNO 42 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1 3 1 cement 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge PWD SR Vol 02 2023 24 Item no 8 9 Page No 42 | Sqm | 396.55 | 396.55 | 92.91 | False | None | None | False | None | False | 36843.4605 | 0 |
| 2812972 | 90680 | None | PWD SR Vol 02 2023 24 INO 9 2 PNO 59 | Providing and laying Cement concrete flooring 40 mm thick with 20 mm
nominal size stone aggregate using 1 2 4 (1 cement 2 coarse sand
4 graded stone aggregate) finished with a floating coat of neat cement,
including cement slurry complete. (PWD SR Vol 02, 2023 24, Item no9.1, Page No.59) | Sqm | 824.0 | 824.0 | 25.97 | False | None | None | False | None | False | 21399.28 | 0 |
| 2812973 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 14 6 PN 10 | Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of 1 Liquid 2 Powder to the RCC surface like bathroom toilet balcony & utility area applied @ 1 7kg m2 in 2 coats to achieve 1mm DFT having Elongation at break 50 as per ASTM D 412 Tensile strength 1N mm2 as per ASTM D 412 Adhesion strength 0 80 N mm2 as per ASTM
D 4541 crack bridging upto 1mm as per ASTM C 836 Water penetration 5 bar pressure as per BS EN 12390 The finished cost to include surface preparation making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet treatment of cracks completely as per specification Newly Constructed Bathroom toilet balcony utility with Cementatius Waterproof coating Below 300 m2 PWD SR Vol 02 2023 24 Item no 15 10 Page No 151 | Sqm | 378.01 | 378.01 | 41.37 | False | None | None | False | None | False | 15638.2737 | 0 |
| 2812974 | 90680 | None | PWD SR Vol 02 2023 24 INO 9 11 PNO 60 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in all colours shades except White Ivory Grey Fume Red Brown laid on 20 mm thick bed of cement mortar 1 4 1 Cement 4 Coarse sand jointing with grey cement slurry @ 3 3 kg m2 including pointing the joints with white cement and matching pigments etc complete PWD SR Vol 02 2023 24 Item no 9 11 Page No 60 | Sqm | 915.67 | 915.67 | 130.34 | False | None | None | False | None | False | 119348.4278 | 0 |
| 2812975 | 90680 | None | PWD SR Vol 02 2023 24 INO 9 39 PNO 65 | Providing skirting dadooing rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials labour complete as per specifications PWD SR Vol 02 2023 24 Item no 9 39 Page No 65 | Sqm | 1492.47 | 1492.47 | 0.13 | False | None | None | False | None | False | 194.0211 | 0 |
| 2812976 | 90680 | None | PWD SR Vol 03, 2023 24, INO. 12.54, PNO.104 | Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long brackets
of 15x15mm M.S Square tube, the entire door frame to be reinforced with
19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the
wall using M.S. Screws of 65/80mm size complete as per manufacturers
specification & direction of Engineer in charge(PWD SR Vol 03, 2023 24, Item no. 12.54, Page No.104) | Sqm | 365.64 | 365.64 | 3.15 | False | None | None | False | None | False | 1151.766 | 0 |
| 2812977 | 90680 | None | PWD SR Vol 03, 2023 24, INO. 12.53, PNO.104 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M S tube of 19 gauge thickness Providing & fixing 30mm thick factory made rigid foam Panelled Door
Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for
stiles and 15x15mm for top & bottom rails, covered with heat moulded
PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm
thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either
side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom
rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to
the stiles & rails with 5x30mm PVC sheet beading on either side & joined
together with solvent cement adhesive etc., Complete as per manufacturers
specification & direction of Engineer in charge fixed to frames with 3 nos
of 75 mm Aluminium hin(PWD SR Vol 03, 2023 24, Item no. 12.53, Page No.104) | Sqm | 1635.64 | 1635.64 | 3.15 | False | None | None | False | None | False | 5152.266 | 0 |
| 2812978 | 90680 | None | PWD SR Vol 03, 2023 24, INO. 12.21, PNO.100 | Providing and fixing in position fully panelled Matti/Nandi wood shutters
for doors with , stiles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and stiles 100mm wide as per drawing and panels
of 25mm thick including cost of materials, labour, usage charges complete
as per specifications. (excluding cost of fixtures)(PWD SR Vol 03, 2023 24, Item no. 12.21, Page No.100) | Sqm | 5789.64 | 5789.64 | 4.41 | False | None | None | False | None | False | 25532.3124 | 0 |
| 2812979 | 90680 | None | PWD SR Vol 03, 2023 24, INO. 12.87, PNO.109 | Providing & fixing of 2.5 track x 2 panel sliding windows made out of multi
chambered UPVC(Matching to RAL 9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and
lead free, gaskets grey colour having isolated drainage and reinforced with
Galvanized Iron profile through out the window frame. The outer frame
having an overall size of 81mm width x 42mmheight with reinforcement
of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh
sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing
bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall
be provided with 5mm plain float glass, standard hardware& single point
locking system with touch lock. Wall thickness of frame & sash shall be
of 1.8 2.0mm. | Sqm | 6598.64 | 6598.64 | 5.4 | False | None | None | False | None | False | 35632.656 | 0 |
| 2812980 | 90680 | None | PWD SR Vol 02 2023 24 INO 11 34B PNO 86 | Providing and fixing M S grills of required pattern in frames of windows etc with M S flats square or round bars etc including priming coat with approved steel primer all complete Fixed to openings wooden frames with rawl plugs screws etc PWD SR Vol 02 2023 24 Item no 11 34B Page No 86 | Kg | 230.64 | 230.64 | 160.65 | False | None | None | False | None | False | 37052.316 | 0 |
| 2812981 | 90680 | None | PWD SR Vol 02 2023 24 INO 8 33 1 PNO 46 | Providing and fixing stainless steel Grade 304 railing made of Hollow tubes channels plates etc including welding grinding buffing polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete i c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge PWD SR Vol 02 2023 24 Item no 11 28 Page No 85 | Kg | 581.95 | 581.95 | 60.94 | False | None | None | False | None | False | 35464.033 | 0 |
| 2812982 | 90680 | None | PWD SR Vol 02 2023 24 INO 8 33 1 PNO 46 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls @ 1 25 L 10 m² over and including one coat of Special primer applied @ 0 75 L 10 m² with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge The gloss should be 50 @ 60 degree
angle with 10 years life PWD SR Vol 02 2023 24 Item no 8 33 1 Page No 46 | Sqm | 162.74 | 162.74 | 96.18 | False | None | None | False | None | False | 15652.3332 | 0 |
| 2812983 | 90680 | None | PWD SRVol 05 2021 22 Sl no 7 2 M100B PNO 137 | Finishing walls with textured exterior paint of required shade New work Two coats applied @ 3 28 L 10 m² over and including priming coat of exterior primer applied @ 2 20kg 10 m² to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge PWD SR Vol 02 2023 24 Item no 8 29 Page No 45 | Sqm | 291.49 | 291.49 | 89.7 | False | None | None | False | None | False | 26146.653 | 0 |
| 2812984 | 90680 | None | PWD SRVol 05 2021 22 Sl no 7 2 M100B PNO 137 | Providing and fixing water closet squatting pan Indian type W C pan with 100 mm sand cast Iron P or S trap 10 litre low level white P V C flushing cistern including flush pipe with manually controlled device handle lever conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W C pan of size 580x440 mm with integral type foot rests PWD SR Vol 02 2023 24 Item no 14 1 1 Page No 131 | Each | 5030.52 | 5030.52 | 3.0 | False | None | None | False | None | False | 15091.56 | 0 |
| 2812985 | 90680 | None | PWD SRVol 05 2021 22 Sl no 7 2 M100B PNO 137 | Providing and fixing wash basin with C I brackets 15 mm dia CP Brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls wherever required using White Vitreous China Wash basin size 630x450 mm with a single 15 mm C P brass pillar tap PWD SR Vol 02 2023 24 Item no 14 7A Page No 133 | Each | 4244.63 | 4244.63 | 3.0 | False | None | None | False | None | False | 12733.89 | 0 |
| 2812986 | 90680 | None | PWDSR Vol 05 2021 22 Sl no 7 2 M100B PNO 137 | Supplying PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testingand commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms with soft gravel or selected earth available from the excavation etc complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc for PVC pipes 32mm dia 10 kg sqcm & class 5 PWD SR Vol 05 2021 22 Sl no 1 2 M010B Page No 134 | m | 65.92 | 65.92 | 120.0 | False | None | None | False | None | False | 7910.4 | 0 |
| 2812987 | 90680 | None | PWDSR Vol 05 2021 22 Sl no 7 2 M100B PNO 137 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes with cost of elastomeric sealing rings and specials excluding cost of specials with jointing of approved type with all labour lead & lifts including encasing the pipes alround to a depth of not less than 15 cms with soft gravel or selected earth available from the excavation etc complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing etc for Pipes of SN4 160mm dia PWD SR Vol 05 2021 22 Sl no 2 4 M020D Page No 134 | m | 572.68 | 572.68 | 80.0 | False | None | None | False | None | False | 45814.4 | 0 |
| 2812988 | 90680 | None | PWDSR Vol 05 2021 22 Sl no 7 2 M100B PNO 137 | Supplying laying and jointing HDPE pipes of specified grade and conforming to IS 4984 2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches laying true to line and jointing of pipes and specials with electrofusion welding giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms with soft gravel or selected earth available from the excation testing and commissioning The rate is exclusive of required specials and fittings wherever necessary like saddle Tee stub ends flanged sets bedns reducers etc complete Contractor will make his own arrangements for procuring water for testing etc Note Upto 110mm dia Coil shall be used For Grade PE80 PN6 0 HDPE Grade PE80 PN6 0 90mm dia PWD SR Vol 05 2021 22 Sl no 1 3 K010C Page No 121 | m | 245.14 | 245.14 | 30.0 | False | None | None | False | None | False | 7354.2 | 0 |
| 2812989 | 90680 | None | PWDSR Vol 05 2021 22 Sl no 7 2 M100B PNO 137 | Supply and delivery at site special moulded variety PVC couplers as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark and with its latest amendments 32mm dia PVC couplers PWD SR Vol 05 2021 22 Sl no 6 2 M090B Page No 136 | Each | 17.51 | 17.51 | 30.0 | False | None | None | False | None | False | 525.3 | 0 |
| 2812990 | 90680 | None | PWDSR Vol 05 2021 22 Sl no 7 2 M100B PNO 137 | Supply and delivery at site special moulded variety PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 32 mm dia PVC Elbows PWD SR Vol 05 2021 22 Sl no 7 2 M100B Page No 137 | Each | 22.66 | 22.66 | 25.0 | False | None | None | False | None | False | 566.5 | 0 |
| 2812991 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supply and delivery at site special moulded variety PVC bend as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 32 mm dia PVC BEND PWD SR Vol 05 2021 22 Sl no 9 2 M120B Page No 138 | No | 39.14 | 39.14 | 40.0 | False | None | None | False | None | False | 1565.6 | 0 |
| 2812992 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover conforming to ISI 12701 colour of opaque white or as approved by Engineer in charge The rate includes making necessary holes for inlet outlet & over flow pipes The base support i c fittings & fixtures for tank shall be paid separately For 1000 litre capacity PWD SR Vol 02 2023 24 Sl no 13 34A Page No 123 | Ltr | 9.27 | 9.27 | 1000.0 | False | None | None | False | None | False | 9270.0 | 0 |
| 2812993 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Providing and fixing Brass full way valve gate with C I wheel of approved quality screwed end 32 mm nominal bore PWD SR Vol 02 2023 24 ltem no 13 4 2 Page No 117 | No | 615.94 | 615.94 | 6.0 | False | None | None | False | None | False | 3695.64 | 0 |
| 2812994 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Providing and fixing brass stop cock of approved quality 20 mm nominal bore PWD SR Vol 02 2023 24 ltem no 13 3 2 Page No 117 | No | 314.15 | 314.15 | 8.0 | False | None | None | False | None | False | 2513.2 | 0 |
| 2812995 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Providing and fixing brass bib cock of approved quality 20 mm nominal bore PWD SR Vol 02 2023 24 ltem no 13 2 2 Page No 117 | No | 314.15 | 314.15 | 12.0 | False | None | None | False | None | False | 3769.8 | 0 |
| 2812996 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in charge PWD SR Vol 02 2023 24 ltem no 14 22A Page No 135 | No | 834.3 | 834.3 | 10.0 | False | None | None | False | None | False | 8343.0 | 0 |
| 2812997 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc and running before concreting the slab The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary 19 20 mm dia 2 mm thick PWD Electrical CSR 2023 24 IN 1 2 1 PN 2 | m | 66.0 | 66.0 | 20.0 | False | None | None | False | None | False | 1320.0 | 0 |
| 2812998 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends metal PVC Junction boxes adhesive paste etc and running before concreting the slab The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick PWD Electrical CSR 2023 24 IN 1 2 2 PN 2 | m | 78.0 | 78.0 | 55.0 | False | None | None | False | None | False | 4290.0 | 0 |
| 2812999 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends metal junction boxes adhesive paste etc by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19 20 mm dia 2 mm thick PWD Electrical CSR 2023 24 IN 1 3 1 PN 2 | m | 68.0 | 68.0 | 10.0 | False | None | None | False | None | False | 680.0 | 0 |
| 2813000 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends metal junction boxes adhesive paste etc by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick PWD Electrical CSR 2023 24 IN 1 3 2 PN 2 | m | 79.0 | 79.0 | 20.0 | False | None | None | False | None | False | 1580.0 | 0 |
| 2813001 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1 5mm2 Phase & Neutral & 1x1 0 mm2 Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694 and latest amendments without control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block complete for each outlet PWD Electrical SR 2021 22 Short point upto 3m from tapping point to out let via switch box PWD Electrical CSR 2021 2022 IN 2 2 1 PN 5 Short point upto 3m from tapping point to out let via switch box | m | 269.0 | 269.0 | 2.0 | False | None | None | False | None | False | 538.0 | 0 |
| 2813002 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1 5mm2 Phase & Neutral & 1x1 0 mm2 Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694 and latest amendments without control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block complete for each outlet PWD Electrical SR 2021 22 Short point upto 3m from tapping point to out let via switch box PWD Electrical CSR 2023 24 IN 2 2 2 PN 5 Medium point above 3m upto 6m from tapping point to out let via switch box | No | 379.0 | 379.0 | 6.0 | False | None | None | False | None | False | 2274.0 | 0 |
| 2813003 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1 5mm2 Phase & Neutral & 1x1 0 mm2 Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694 and latest amendments without control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block complete for each outlet PWD Electrical SR 2021 22 Short point upto 3m from tapping point to out let via switch box PWD Electrical CSR 2023 24 IN 2 2 2 PN 5 Long point above 6m upto 10m from tapping point to out let via switch box | No | 555.0 | 555.0 | 16.0 | False | None | None | False | None | False | 8880.0 | 0 |
| 2813004 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments PWD Electrical CSR 2023 24 IN 2 3 2 PN 5 1 5 mm2 | m | 26.0 | 26.0 | 20.0 | False | None | None | False | None | False | 520.0 | 0 |
| 2813005 | 90680 | None | PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 | Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments PWD Electrical CSR 2023 24 IN 2 3 3 PN 5 2 5 mm2 | m | 42.0 | 42.0 | 20.0 | False | None | None | False | None | False | 840.0 | 0 |
| 2813006 | 90680 | None | PWDElectrical CSR 2023 24 IN 3 5 7 PN 8 16 | Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments PWD Electrical CSR 2023 24 IN 2 3 4 PN 5 4 mm2 | m | 63.0 | 63.0 | 45.0 | False | None | None | False | None | False | 2835.0 | 0 |
| 2813007 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying 6A flush type socket and 6 A flush type SP switch either surface flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 PWD Electrical CSR 2023 24 IN 3 1 2 PN 8 6A 3 5 Way | No | 147.0 | 147.0 | 4.0 | False | None | None | False | None | False | 588.0 | 0 |
| 2813008 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 PWD Electrical CSR 2023 24 IN 6 3 3 PN 9 6A Three Way socket | No | 147.0 | 147.0 | 14.0 | False | None | None | False | None | False | 2058.0 | 0 |
| 2813009 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick Stone C C wall PWD Electrical CSR 2023 24 IN 3 4 3 PN 8 6 Way | No | 177.0 | 177.0 | 1.0 | False | None | None | False | None | False | 177.0 | 0 |
| 2813010 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick Stone C C wall PWD Electrical CSR 2023 24 IN 3 4 6 PN 8 16 18 Way | No | 319.0 | 319.0 | 2.0 | False | None | None | False | None | False | 638.0 | 0 |
| 2813011 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal PVC box PWD Electrical CSR 2023 24 IN 3 5 3 PN 8 6 Module | No | 175.0 | 175.0 | 1.0 | False | None | None | False | None | False | 175.0 | 0 |
| 2813012 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal PVC box PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 Module | No | 397.0 | 397.0 | 2.0 | False | None | None | False | None | False | 794.0 | 0 |
| 2813013 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees CCT 5500K IP66 optical and electrical compartment & impact resistance of complete luminaire IK08 Power Factor 0 9 with mains Surge Protection Min 5KV along with Over voltage Overload short circuit miss wiring protection Compatible for pole mounting with outer dia of 40mm to 50mm Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60Hz application Compliance to IS 10322 IEC 60598 LM 79 & LM 80 Adherence with RoHS UL approved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools LED Light fixture with W System Power consumption LED fficiency 1301m w nominal CRI 75 Luminaire manufacturer should have in house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001 2008 Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned Note 3 LED street lights that is procured shall comply to the specification as per DMA Order No 25775DMA 69 DEVT 2018 19 Dated 03 01 2019 PWD Electrical CSR 2023 24 IN 11 8 1 PN 46 LED Streetlight 25 W | No | 2425.0 | 2425.0 | 1.0 | False | None | None | False | None | False | 2425.0 | 0 |
| 2813014 | 90680 | None | PWD Electrical CSR 2023 24 IN 13 2 1 PN 56 | Supplying and Fixing mm dia class A GI pipe bracket upto 2 7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV SV MH FTL street light fitting of all capacities on rail RCC wall tubular pole using suitable clA bolts nuts and wiring using suitable capacity wires PWD Electrical CSR 2023 24 IN 13 2 1 PN 56 Using 25mm dia G I Pipe | No | 1203.0 | 1203.0 | 1.0 | False | None | None | False | None | False | 1203.0 | 0 |
| 2813015 | 90680 | None | PWD Electrical CSR 2023 24 IN 13 5 PN 56 | Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clA bolts nuts and wiring using suitable capacity wires PWD Electrical CSR 2023 24 IN 13 5 PN 56 | No | 162.0 | 162.0 | 1.0 | False | None | None | False | None | False | 162.0 | 0 |
| 2813016 | 90680 | None | PWD Electrical CSR 2023 24 IN 11 3 1 PN 43 | Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80 Power Input 220 240V@ 50 60Hz & Power factor 0 9 along with CE approved 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 2' 9 10 W PWD Electrical CSR 2023 24 IN 11 3 1 PN 43 | No | 551.0 | 551.0 | 2.0 | False | None | None | False | None | False | 1102.0 | 0 |
| 2813017 | 90680 | None | PWD Electrical CSR 2023 24 IN 11 3 2 PN 43 | Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80 Power Input 220 240V@ 50 60Hz & Power factor 0 9 along with CE approved 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 4' 20 22 W PWD Electrical CSR 2023 24 IN 11 3 2 PN 43 | No | 690.0 | 690.0 | 2.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 2813018 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 5 7 PN 8 16 | Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70 efficacy 80 lumen per W life 25000 burning hours and Compliance to IS 10322 IEC 60598 LM 79 & LM 80 The LED are driven by HF electronic driver integrated in the system with PF 0 95 power loss should 5 of lamp Wage short circuit & open circuit protection to be integrated in the circuit THD less than 20 Life as per LM 79 The operating input voltage should be between 130 to 275 V BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition PWD Electrical CSR 2023 24 IN 11 11 5 PN 38 Part 1 12W 6500K | No | 269.0 | 269.0 | 2.0 | False | None | None | False | None | False | 538.0 | 0 |
| 2813019 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 14 6 PN 10 | Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power COB with CCT 6500 degree K CRI 70 efficacy 100 lumen per W 120degree beam spread life 25000 burning hours and Compliance to IS10322 IEC 60598 LM 79 & LM 80 The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LED's are driven by HF electronic driver integrated in a separate control gear assembly with PF 0 95 power loss should 5 of lamp Wage short circuit & open circuit protection to be integrated in the circuit THD less than 20 Life as per LM 79 The operating input voltage should be between 130 to 275 V BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition 10 12W PWD Electrical CSR 2023 24 IN 11 4 2 PN 44 | No | 1269.0 | 1269.0 | 4.0 | False | None | None | False | None | False | 5076.0 | 0 |
| 2813020 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 14 6 PN 10 | Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0 0076 twin twisted PVC insulated wires required Nos of round blocks and clA On wall ceiling Rafter Girders PWD Electrical CSR 2023 2024 IN 13 7 1 PN 56 | No | 122.0 | 122.0 | 16.0 | False | None | None | False | None | False | 1952.0 | 0 |
| 2813021 | 90680 | None | PWD Electrical CSR 2023 24 IN 3 14 6 PN 10 | Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board PWD Electrical CSR 2023 24 IN 3 14 6 PN 10 6A Lamp Holder | No | 71.0 | 71.0 | 6.0 | False | None | None | False | None | False | 426.0 | 0 |
| 2813022 | 90680 | None | PWD Electrical CSR 2023 24 IN 6 1 PN 30 | Supplying exhaust fan of 1440 RPM of 300 mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz AC Supply PWD Electrical CSR 2023 24 IN 6 1 PN 30 | No | 1492.0 | 1492.0 | 6.0 | False | None | None | False | None | False | 8952.0 | 0 |
| 2813023 | 90680 | None | PWD Electrical CSR 2023 24 IN 13 13 PN 57 | Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 A ceiling rose with sufficient length of 23 0 0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame PWD Electrical CSR 2023 24 IN 13 13 PN 57 | No | 707.0 | 707.0 | 6.0 | False | None | None | False | None | False | 4242.0 | 0 |
| 2813024 | 90680 | None | PWD Electrical CSR 2023 24 IN 5 18 4 PN 17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 PWD Electrical CSR 2023 24 IN 5 18 4 PN 17 6 32 A DP | No | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 2813025 | 90680 | None | PWD Electrical CSR 2023 24 IN 5 42 2 PN 20 | Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equipped with tamper proof locking arrangements with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc complete PWD Electrical CSR 2023 24 IN 5 42 2 PN 20 16SWG | Sqm | 0.43 | 0.43 | 8000.0 | False | None | None | False | None | False | 3440.0 | 0 |
| 2813026 | 90680 | None | Electrical CSR 2023 24 IN 5 40 1 PN 20 | Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M S flat frame work in existing panel board The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts nuts and washers etc complete PWD Electrical CSR 2023 24 IN 5 40 1 PN 20 100 A 4 x 30 x 6 mm Aluminium Strips | m | 2465.0 | 2465.0 | 1.0 | False | None | None | False | None | False | 2465.0 | 0 |
| 2813027 | 90680 | None | PWD Electrical CSR 2023 24 IN 5 30 PN 19 | Supplying fixing and wiring Electronic Trivector Meter ETV 5 to 20A single phase Class 1 Accuracy with Temper Proof Energy Meter PWD Electrical CSR 2023 24 IN 5 30 PN 19 | No | 1380.0 | 1380.0 | 1.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 2813028 | 90680 | None | Bescom CSR 2023 24 IN 1 6 2 PN 43 | Digging of Pit for providing GI Pipe type Earthing Hard Soil Bescom CSR 2023 24 IN 1 6 2 PN 43 | No | 2990.0 | 2990.0 | 1.0 | False | None | None | False | None | False | 2990.0 | 0 |
| 2813029 | 90680 | None | Bescom CSR 2021 22 IN 54 01 PN 17 Part III | GI Grounding pipe B Class 42 mm dia 2 5 Mtr long 3 2 mm thick with bolt nut GI Strips and washer complete Minimum Weight of GI Pipe 7 3 Kg Bescom CSR 2021 22 IN 54 01 PN 17 Part III | No | 743.0 | 743.0 | 1.0 | False | None | None | False | None | False | 743.0 | 0 |
| 2813030 | 90680 | None | Bescom CSR 2023 24 IN 51 02 PN 22 | Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each Bescom CSR 2023 24 IN 51 02 PN 22 | No | 676.0 | 676.0 | 1.0 | False | None | None | False | None | False | 676.0 | 0 |
| 2813031 | 90680 | None | Bescom CSR 2023 24 IN 51 03 PN 22 | Good Quality Salt for grounding purposes packed in 50 Kg gunny bag Bescom CSR 2023 24 IN 51 03 PN 22 | No | 310.0 | 310.0 | 1.0 | False | None | None | False | None | False | 310.0 | 0 |
| 2813032 | 90680 | None | Bescom CSR 2023 24 IN 32 03 PN 13 | 1 1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 Bescom CSR 2023 24 IN 32 03 PN 13 10 Sqmm 4 Core 10 GI Strips 4 x 0 8 mm | Km | 118004.0 | 118004.0 | 0.06 | False | None | None | False | None | False | 7080.24 | 0 |
| 2813033 | 90680 | None | Bescom CSR 2023 24 IN 32 03 PN 13 | Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff LT Cable Bescom CSR 2023 24 IN 21 05 PN 52 2 5 to 25 Sqmm | Km | 20886.0 | 20886.0 | 0.06 | False | None | None | False | None | False | 1253.16 | 0 |
| 2813034 | 90680 | None | Bescom CSR 2023 24 IN 60 03 PN 27 | Aluminium End Terminal Lug 25 Sqmm Bescom CSR 2023 24 IN 60 03 PN 27 | No | 3.0 | 3.0 | 8.0 | False | None | None | False | None | False | 24.0 | 0 |
| 2813035 | 90680 | None | Bescom CSR 2023 24 IN 49 04 PN 16 Part III | GI Pipe B Class as per IS 1239 Bescom CSR 2023 24 IN 49 04 PN 16 Part III GI Pipe 40 mm Dia | m | 295.0 | 295.0 | 3.0 | False | None | None | False | None | False | 885.0 | 0 |
| 2813036 | 90680 | None | Bescom CSR 2023 24 IN 32 03 PN 13 | Epoxy Terminating Kit Pothead suitable for 1 1 kV LTUG Cable Bescom CSR 2021 22 IN 35 01 PN 15 Up to 4C x 50 Sqmm | No | 324.0 | 324.0 | 1.0 | False | None | None | False | None | False | 324.0 | 0 |
| 2813037 | 90680 | None | PWD SR Vol 05 2021 22 Sl No 50 | Supply delivery erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments PWD SR Vol 05 2021 22 Sl No 50 CODE P480A Page No 165 | No | 4500.0 | 4500.0 | 1.0 | False | None | None | False | None | False | 4500.0 | 0 |
| 2813038 | 90680 | None | 4 PWDSR Vol IIBuildings 11 22 PAGE 71 | Providing and fixing Structural Steel work riveted bolted or welded in
built up sections trusses and framed work including cutting hoisting
fixing in position and applying a priming coat of approved steel primer all
complete including cost of materials labour usage charges of machinery
complete as per specifications and as per directions of the Engineer in
Charge sr2023 24 PWDSR Vol IIBuildings 11 22 PAGE 71 | Kg | 116.39 | 116.39 | 2800.0 | False | None | None | False | None | False | 325892.0 | 0 |
| 2813039 | 90680 | None | PWDSR Vol IIBuildings PAGE 21 IT NO7 1 | Providing & fixing corrugated G S sheet roofing including vertical
curved surface fixed with polymer coated J or L hooks bolts and nuts 8
mm diameter with bitumen and G I limpet washers or with G I limpet
washers filled with white lead including a coat of approved steel primer
and two coats of approved paint on overlapping of sheets complete as
per design drawings up to any pitch in horizontal vertical or curved
surfaces excluding the cost of purlins rafters and trusses and including
cutting to size and shape wherever required as per the direction of
Engineer in charge
0 63 mm thick with zinc coating not less than 275 g m² r2023 24 PWDSR Vol IIBuildings PAGE 21 IT NO7 1 | Sqm | 905.37 | 905.37 | 100.0 | False | None | None | False | None | False | 90537.0 | 0 |