| 1709212072000 | 0 | None | None | Buildings | Providing water proofing, polycarbonate sheet, grill work, mosquito mesh and other allied works at C-90 quarters at vasanthnagar, Bengaluru | 3227677.75 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2864191 | 93161 | None | 003 | Providing and constructing burnt brick masonry with approved quality of
modular bricks of standard size of class designation 5.00 N/mm2 table moulded) with lime mortar
for basement and superstructure including cost of materials, labour charges, scaffolding, curingcomplete as per specification - Do- in Lime mortar 1:3 Propo (Page No.190 I.No.21.9.3 2021-22
Common SR Vol-2) | Cum | 3080.0 | 3080.0 | 2.16 | False | None | None | False | None | False | 6652.8 | 0 | | 2864192 | 93161 | None | 004 | Providing 15 mm cement plaster on the rough side of single or half brick wall
of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials, labour, curing
complete as per specifications and as per directions of Engineer-in-charge.(Page No.41 Item No.8.2.1 Common SR for 2021-22 Vol-2) | Sqm | 272.8 | 272.8 | 15.82 | False | None | None | False | None | False | 4315.696 | 0 | | 2864193 | 93161 | None | 005 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming
to having thermal stability for hot and cold water supply including all CPVC plain and brass
threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of
pipes and fittings with one step CPVC solvent cement and testing of joints complete, (internal
work exposed on wall) 20mm nominal dia pipe (1st Corringendum Dated:21.04.2022 Item
No,13.31.2) | Mtr | 262.9 | 262.9 | 85.0 | False | None | None | False | None | False | 22346.5 | 0 | | 2864194 | 93161 | None | 006 | Providing 12 mm cement plaster finished with a floating coat of neat cement of
mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever
required smooth rendering, providing and removing scaffolding, including cost of materials,
labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page
No. 41, Item No. 8.4.2 of PWD Bengaluru Circle SR 2021-22 - Vol-2) | Sqm | 294.8 | 294.8 | 15.82 | False | None | None | False | None | False | 4663.736 | 0 | | 2864195 | 93161 | None | 007 | Dismantling weather proof course and removing and conveying the debris to a
distance to the appropriate disposal area as per direction of Engineer-in-charge. I no 19.59 | Cum | 476.28 | 476.28 | 5.41 | False | None | None | False | None | False | 2576.6748 | 0 | | 2864196 | 93161 | None | 008 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming
to having thermal stability for hot and cold water supply including all CPVC plain and brass
threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of
pipes and fittings with one step CPVC solvent cement and testing of joints complete, (internal
work exposed on wall) 20mm nominal dia pipe (1st Corringendum Dated:21.04.2022 Item
No,13.31.2) | Sqm | 1230.12 | 1230.12 | 15.82 | False | None | None | False | None | False | 19460.4984 | 0 | | 2864197 | 93161 | None | 009 | Providing, laying & fixing cement base, precast, pre polished cement concrete,
designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and
landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using
white cement, including cost of materials, mortar, including cutting, griding the edge to half/full
round wherever required, labour, curing complete as per specification.(Page No.65 I.No.9.40
2021-22 Common SR Vol-2) | Sqm | 1230.12 | 1230.12 | 15.82 | False | None | None | False | None | False | 19460.4984 | 0 | | 2864198 | 93161 | None | 010 | Providing and laying water proofing treatment to the Roof with PU based
single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken
portion of WC:Bathroom, cold applied PU aterproofing membrane that is highly elastic with
elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The
waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film
thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with
120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface
preparation, making coving at Junction, Bore Packing, treatment of construction joints completely
as per specification & with a 10 years warranty on product & work from certified anufacturers as
per the direction of the ngineer In charge. .(I.No.15.1 2021-22 Common SR Vol-2) | Sqm | 804.6 | 804.6 | 188.45 | False | None | None | False | None | False | 151626.87 | 0 | | 2864199 | 93161 | None | 011 | Providing and laying in position plain cement concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine
aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm
thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of
quality, labour, Usage charges of machineries, curing, and all the other appurtenances required
to complete the work as per technical specifications. (The cost of steel reinforcement & formwork
shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse
aggregates(Page No.5 Item No.2.1.3 2021-22 Common SR Vol-1) | Cum | 6300.8 | 6300.8 | 1.09 | False | None | None | False | None | False | 6867.872 | 0 | | 2864200 | 93161 | None | 012 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of
12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including
cost of materials, labour, curing complete as per specifications. (Page No.23 item
No.7.18Common SR 2021-22 Vol-2) | Cum | 2218.7 | 2218.7 | 3.19 | False | None | None | False | None | False | 7077.653 | 0 | | 2864201 | 93161 | None | 013 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness
to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,
in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of
cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2
including pointing the joints with white cement and matching pigments etc., complete.(Page
No.60 I.No.9.11 for 2021-22 Common SR Vol-2) | Sqm | 850.3 | 850.3 | 6.75 | False | None | None | False | None | False | 5739.525 | 0 | | 2864202 | 93161 | None | 014 | Providing and fixing vitreous china clay "HINDWARE" make of equivalent
colour English water closet of wall mounting type with P or S trap with low level cistern of china clay tank and with 3.20 cms flush pipe, double flapped plastic seat of approved quality and make
conforming to IS specification etc., complete over flow arrangements with specials and 25mm
mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making
good the wall and floor whrever required, complete, including cost of all materials, labour
charges, with all lead and lift, loading and unloading, transportation, machineries and all other
incidental charges for successful completion of the work as per directions of the Engineer-incharge of the work. (Rate approved vide SE Letter No.6378 Dtd: 30.10.2013) | Each | 15000.0 | 15000.0 | 4.0 | False | None | None | False | None | False | 60000.0 | 0 | | 2864203 | 93161 | None | 015 | Providing and fixing Ivory colour, vitreous, china clay, Pedestal wash basin of
"HINDWARE" make, Rhapsody, Cat No. 10054, Pedestal cat No. 11018, with fittings, C.I.
brackets, 32mm C.P. Brass waste of standard pattern, painting of fittings and brackets, cutting
and making good the wall and floor, wherever required includin mosquito proof waste coupling of
approved design etc., complete. including cost of all materials, labour charges, with all lead and
lift, loading and unloading, transportation, machineries and all other incidental charges for
successful completion of the work as per directions of the Engineer-in-charge of the work.(ADR
No.6378 Dated:.30.10.2013) | Each | 7150.0 | 7150.0 | 4.0 | False | None | None | False | None | False | 28600.0 | 0 | | 2864204 | 93161 | None | 016 | Providing and fixing Jaguar wall mixer 3 in 1 system model No. QQT-CHR7281 of Queen's collection with provision for both Telephone shower and overhead shower
complete with wall flange etc., complete. The work includes cost of all materials, labour charges with all lead and unloading, transportation and all other incidental charges etc complete as directed by the Engineer in charge of the work.(ADR No.8446Dated:.16.01.2014) | Each | 5055.0 | 5055.0 | 4.0 | False | None | None | False | None | False | 20220.0 | 0 | | 2864205 | 93161 | None | 017 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single
hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting
and making good the walls wherever
required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass
single hole basin mixer. (Page No.125 item No.14.7A Common SR 2021-22 Vol-2) | Each | 3958.9 | 3958.9 | 4.0 | False | None | None | False | None | False | 15835.6 | 0 | | 2864206 | 93161 | None | 018 | Supply and fixing of ''JAQUAR'' make,Florentine series, 2 way bib cock with
wall flange CAT No. FLR-5041N, including necessary thread, white lead ,tapes,suitable length
CP brass extension pipe etc., complete including cost of all materials, labour charges, Hom of
machinery & equipments with all lead and lifts, loading and unloading charges, transportation
cost and conveyance and all other incidental charges for successfui completion of work as per
specifications and as directed by EIC of the work. (ADR No.: NO. 3826 DATE : 26-08-2014, Sl.
No.4)
| Each | 1887.0 | 1887.0 | 4.0 | False | None | None | False | None | False | 7548.0 | 0 | | 2864207 | 93161 | None | 019 | Providing & fixing of Health faucet of Jaguar brand CAT no 7547, of
continental series, including necessary screws, accessories, etc., complete including cost of all
material, labour charges, all lead & lift, loading & unloading charges, transportation charges,
machinery and all other incidental charges etc., complete as directed by Engineer in charge of
the work. (ADR: NO. 8280 DATE : 28-01-2015, Sl. No. 5) | Each | 2400.0 | 2400.0 | 4.0 | False | None | None | False | None | False | 9600.0 | 0 | | 2864208 | 93161 | None | 020 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not
less than 85 g (Page No.118 item No.13.24 Common SR 2021-22 Vol-2) | No | 239.8 | 239.8 | 4.0 | False | None | None | False | None | False | 959.2 | 0 | | 2864209 | 93161 | None | 021 | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall
mixer of quality & make as approved by Engineer in charge. (Page No.127 item No.14.22B
Common SR 2021-22 Vol-2) | Each | 6321.7 | 6321.7 | 4.0 | False | None | None | False | None | False | 25286.8 | 0 | | 2864210 | 93161 | None | 022 | Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground
fixed to wooden cleats with C.P. brass screws and washers complete.(Page No.128 item
No.14.31 Common SR 2021-22 Vol-2) | Each | 1068.1 | 1068.1 | 4.0 | False | None | None | False | None | False | 4272.4 | 0 | | 2864211 | 93161 | None | 023 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore
(Page No.115 item No.13.2.1 Common SR 2021-22 Vol-2) | No | 358.6 | 358.6 | 8.0 | False | None | None | False | None | False | 2868.8 | 0 | | 2864212 | 93161 | None | 024 | Providing and fixing PTMT pillar cock of approved quality and colour.15 mm
nominal bore, 107 mm long, weighing not less than 110 gms (Page No.118 item No.13.20.1
Common SR 2021-22 Vol-2) | No | 228.8 | 228.8 | 4.0 | False | None | None | False | None | False | 915.2 | 0 | | 2864213 | 93161 | None | 025 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete.Semi rigid pipe 32 mm dia (Page No.128 item No.14.28.1.1 Common SR
2021-22 Vol-2) | Each | 225.5 | 225.5 | 4.0 | False | None | None | False | None | False | 902.0 | 0 | | 2864214 | 93161 | None | 026 | Providing and fixing 600x120x5 mm glass shelf with edges round off,supported
on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with
40 mm long screws, rawl plugs etc., complete.(Page No.129 item No.14.33 Common SR 2021-
22 Vol-2)
| Each | 778.8 | 778.8 | 20.0 | False | None | None | False | None | False | 15576.0 | 0 | | 2864215 | 93161 | None | 027 | Providing and fixing unplasticised PVC connection pipe with brass unions : 30
cm length 15 mm nominal bore (Page No.116 item No.13.8.1.1 Common SR 2021-22 Vol-2) | No | 115.5 | 115.5 | 4.0 | False | None | None | False | None | False | 462.0 | 0 | | 2864216 | 93161 | None | 028 | Supplying and fixing Jagaur single towel rail of 600 mm long of AKP-35711P
or Equivalent Model, Including necessary fixing screws, etc., the rate includes cost of all
materials, labour charges, all lead and lift, loading and unloading, transportation charges, and all
other incidental charges complete as per the directions of Engineer in charge of work. (Kubix
prime series). (ADR No. 11005/29-03-2014, Sl. No. 16) | Each | 2681.0 | 2681.0 | 4.0 | False | None | None | False | None | False | 10724.0 | 0 | | 2864217 | 93161 | None | 029 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and
level and perfect linking at joints, testing and commissioning, including loading unloading at both
destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials
(excluding cost of specials) with jointing of approved type, with all labour with all lead & lift
including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or
selected earth available from the excavation etc. complete and giving necessary hydraulic test to
the required pressure as per ISS (Contractor will make his own arrangements for procuring water
for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 (Page No.134 NO.1.7 SOR
CODE M010G COMMON SCHEDULE OF RATES 2021-22 Vol-V) | Mtr | 433.4 | 433.4 | 62.0 | False | None | None | False | None | False | 26870.8 | 0 | | 2864218 | 93161 | None | 030 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest
amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and
level and perfect linking at joints, testing and commissioning, including loading unloading at both
destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials
(excluding cost of specials) with jointing of approved type, with all labour with all lead & lift
including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or
selected earth available from the excavation etc. complete and giving necessary hydraulic test to
the required pressure as per ISS (Contractor will make his own arrangements for procuring water
for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 (Page No.134 NO.1.6 & 1.5 SOR
CODE M010F & M010E COMMON SCHEDULE OF RATES 2021-22 Vol-Vmtr | Mtr | 231.0 | 231.0 | 132.0 | False | None | None | False | None | False | 30492.0 | 0 | | 2864219 | 93161 | None | 031 | Fabricating and fixing single/double leaf single swing flush shutter in 32 mm
thick approved flush board finished with approved 4mm thick approved Veneer on both sides,
complete as per drawing and Architect's instruction. Hardware : 2 Nos of handles, 3 nos
ofhinges, 1 no Door Stopper, 2 nos of Tower bolt along with 10" aldrop etc., complete,. The
Workincludes cost of all materials, labour charges with all lead lift and unloading, transportation
and
all types of statutory taxes and all incidental charges etc., complete including cost and
conveyance of all material all lead and lift, loading and unloading, transportation and all types of
statutory taxes and all material charges etc., complete including cost and vonveyance of all
materials, all lead and lift, loading and unloading, hire charges and all other incidental charges
etc., complete as per standard technical detailed specification and as per approved design and
drawing and directions of the Engineer in charge of the work (Size : 6.75' x3.05'). Data to be
prepared (ADR No.5717Dated:07.11.2015) | No | 18000.0 | 18000.0 | 3.0 | False | None | None | False | None | False | 54000.0 | 0 | | 2864220 | 93161 | None | 032 | Conveying the excavted earth debries silt and over burden earth to a distance
of 20 km by using private vehicle inluding all lead and lift charges etc.Basic rate Calculation :
Common SR Vol 3 of 2021-22 P.no.3/Item No. 1.1: P. No. 134 Loading & unloading of Stone
Boulder/Stone aggregates/ Sand/Kankar/Moorum charges Rs 72.00 and Item No. 1.4C Lead
Charges Rs 5.00 Ton/Km is Rs 195.00 (5.00 x1.30x30.00) Basic Rate 72.00+195.00=267.00
rs/Cum | Cum | 293.7 | 293.7 | 90.0 | False | None | None | False | None | False | 26433.0 | 0 | | 2864221 | 93161 | None | 033 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm
nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single
extruded) having density 600 kg/m3 and laminated on both side by laminate Sheet/PVC foil
lamination. The exposed edges shall be sealed with PVC edge beading of same shade and
colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall
be fixed to frame using approved hinges with necessary stainless steel screws, all complete as
per direction of Engineer-in-charge. (Page No.71 Item No.10.17 of PWD Bengaluru Circle SR
2021-22-Vol-2 | Sqm | 4434.1 | 4434.1 | 17.47 | False | None | None | False | None | False | 77463.727 | 0 | | 2864222 | 93161 | None | 034 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls
wherever required : 510x1040 mm bowl depth 250 mm(2021-22 Common SR Item No.14.10.1
Vol-2) | Each | 5467.0 | 5467.0 | 1.0 | False | None | None | False | None | False | 5467.0 | 0 | | 2864223 | 93161 | None | 035 | Providing and fixing ward robe as per Principal Chief Architect drawing no.
12640/ WARDROBE to 15 Hon'ble high court Judges quarters, using 19mm thick BWP board for
verticals, horizontals and drawers with 6mm thick BWP ply sheet for back side of the ward robe.
provide 1.00 mm thick Formica sheet for all exposed faces inside wardrobe. The vertical and
horizontal exposed edge faces should be provided with Burma teak wood beading of section 25
x 5 mm with suitable adhesives. The wardrobe shutters will be made with 19mm thick BWP
board and 4mm thick veneer sheet of approved colour and shade and provide Burma teak wood
beading all round shutter of section 75 x 10 mm. Provide 2 no's stainless steel oval shape pipe
with stainless steel brackets as shown in drawing all exposed faces should provide with 4mm
thick veneer sheet and finished with melamine polish matt/ shining finish (ADR No.2702/11-12
Dated:13.7.2011 Sl.No.1) | Sqm | 17676.0 | 17676.0 | 50.43 | False | None | None | False | None | False | 891400.68 | 0 | | 2864224 | 93161 | None | 036 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without
pair of handles (best make of approved quality) for aluminium doors including necessary cutting
and making good etc. complete including cost of materials, labour, usage charges of machinery
complete as per specifications. (Page No 92,Item No. 11.47 of PWD Bengaluru Circle SR 2021-
22-Vol-2) | No | 379.6 | 379.6 | 2.0 | False | None | None | False | None | False | 759.2 | 0 | | 2864225 | 93161 | None | 037 | Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate sections and other
sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,
rust free, straight, mitred and jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete
as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and
dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for
separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating
50 micron) including cost of materials, labour, usage charges of machinery complete as per
specifications. (Page No 87, Item No. 11.35.2.3 of PWD Bengaluru Circle SR 2021-22-Vol-2) | Kgs | 509.3 | 509.3 | 90.0 | False | None | None | False | None | False | 45837.0 | 0 | | 2864226 | 93161 | None | 038 | Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi
wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour
charges, and hire charges of machinery for cutting, welding, grinding and erection equipments,
with all lead and lifts, transportation, loading and unloading and all other incidental charges etc.
complete as per specification and directions of the engineer in charge of the work (Page No.26
item No.7.34 Common SR 2021-22 Vol-2) | Sqm | 3437.5 | 3437.5 | 40.0 | False | None | None | False | None | False | 137500.0 | 0 | | 2864227 | 93161 | None | 039 | suppluying cutting, straightening, fabricating and fixing in position of
M.S.Safety grill to the ventilators made out of M.S Square tuble of 25mm and 16 gauge alround
frame with 10mm M.S Square bars both verticle and horizantals at 7cms c/c including welding,
grinding the welded surface for a smooth finish and two coate of synthetic enamel painting over
one coat of shop paintiongect., complete | Sqm | 3250.0 | 3250.0 | 27.87 | False | None | None | False | None | False | 90577.5 | 0 | | 2864228 | 93161 | None | 040 | Removing white wash or colour wash by steel brushing and I or scraping,
sand papering and preparing wall surface smooth including repairs to scraches including cost of
labour, material complete as per specifications. (VOL-2 SR ITEM 20.50) | Sqm | 16.5 | 16.5 | 859.41 | False | None | None | False | None | False | 14180.265 | 0 | | 2864229 | 93161 | None | 041 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m and
under, including cutting the patch in proper shape, raking out joints and preparing plastering the
wall surface with white cement based polymer modified self curing mortar, including disposal of
rubbish, all complete as per the direction of Engineer-In-Charge. (For Roof and
Water Tanks) 20.38 | Sqm | 485.1 | 485.1 | 9.45 | False | None | None | False | None | False | 4584.195 | 0 | | 2864230 | 93161 | None | 042 | Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm
thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the
surface of the wall including disposal
of rubbish with a lead of 50m including curing cost of materials, labour, complete as per
specification 20.88 | Sqm | 369.6 | 369.6 | 249.88 | False | None | None | False | None | False | 92355.648 | 0 | | 2864231 | 93161 | None | 043 | Removing the old paint or polish from wood and I or wood based surface
with paint remover of approved brand I manufacturer and making surface even including cost
of materials, labour, complete as per specifications. (VOL-2 SR ITEM NO. 20.56) | Sqm | 80.3 | 80.3 | 50.34 | False | None | None | False | None | False | 4042.302 | 0 | | 2864232 | 93161 | None | 044 | Providing and applying white cement based putty of average thickness 1
mm, of approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth complete as per specifications and as per directions of Engineer in
charge. (VOL-2 SR ITEM NO. 8.51) | Sqm | 91.3 | 91.3 | 858.2 | False | None | None | False | None | False | 78353.66 | 0 | | 2864233 | 93161 | None | 045 | Providing and applying painting in two coats with Royal Emulsion paint to
Chief Secretary/Ministers Residence of approved brand on wall surface to give an even
approved shade after throughly brushing the surface, free from m ortar drops and other foreign
matter including preparing the surface even and sand paper smooth, including cost and
conveyance of all materials, labour charges, transportation, all lead and lift, loading and
unloading and all other incidental charges etc., complete as per specification and directions of
the Engineer in charge of the work. (ADR No.2420 Sl.No.2) | Sqm | 195.0 | 195.0 | 858.2 | False | None | None | False | None | False | 167349.0 | 0 | | 2864234 | 93161 | None | 046 | Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :Two coats on new work over an under coat of suitable
shade with ordinary paint of approved brand and manufacture after thoroughly brooming the
surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour complete as per specifications and as
per directions of Engineer-in-charge. (VOL-2 SR ITEM NO. 8.41) | Sqm | 143.0 | 143.0 | 241.73 | False | None | None | False | None | False | 34567.39 | 0 | | 2864235 | 93161 | None | 047 | Providing and fixing flush door shutter made out of solid core block board type,
well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm
wide wooden frame alround door shutters covered with cross bonded wooden sheets (core
veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde
resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per
spcification.40 mm thick both side commercial (Page No 106,Item No. 12.57.9 of PWD
Bengaluru Circle SR 2021-22-Vol-2) | Sqm | 3171.3 | 3171.3 | 3.65 | False | None | None | False | None | False | 11575.245 | 0 | | 2864236 | 93161 | None | 048 | Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of
wire 0.63 mm (Page No.A-19 item No.245 Common SR 2021-22 Vol-2) | Sqm | 275.0 | 275.0 | 41.04 | False | None | None | False | None | False | 11286.0 | 0 | | 2864237 | 93161 | None | 049 | Providing MS frame work with ply wall panelling of approved Veneer colour
with pattern as in drawing groove for providing strip light including complete men HOM and
material etc For external wall Se letter dated: 13.02.2023 am Conf hall estimate | Sqm | 8583.0 | 8583.0 | 15.24 | False | None | None | False | None | False | 130804.92 | 0 | | 2864238 | 93161 | None | 050 | Providing and fixing Gypsum board false ceiling of thickness 12.50mm
connecting toG.I. perimeter channel all round the perimeter of the false ceiling and intermediate
chaannl is provided as main channl at every 1229mm c/c and is supported from RCC slab by
means of expansion bolts fixed with raw plug after drilling in RCC slabs, soffit, cleat and ceiling
angle. The ceiling angle is connected to soffit cleat and intermediate channel by means of bolt
and nut, Mf ceiling section MF.5 is provided below intermediate channel perpendicular to it at
every 457mmc/c .The ceiling section and intermediate channal to be connected to each othar by
means of connecting clip. After the frame work is ready 12.5mm gypsum board is cut to the
required size and fixed with 25mm long dry wall screws. The joints of boards are to be filled with
jointing compound and the joins of boards are to be filled with jointing compound and the paper
tape is pasted on the joints. Another two coats of jointing compound is applied and to the level of
the board. Finally two coats of top coat primer are applied. The work has to be carried out as per
directions of the Engineer-in-charge of the work. All the items as Mentioned in the bill of
quantity (BOO) are including lead and lift charges loading and unloading charges labour charges
all incidental charges hire charges of all machinery and equipment required for successful
completion of work etc., complete. The work shall be executed as per standard technical
speeification and directions of Engineer in charge of the work. | Sqm | 2700.0 | 2700.0 | 92.11 | False | None | None | False | None | False | 248697.0 | 0 | | 2864239 | 93161 | None | 051 | Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate sections and other
sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,
rust free, straight, mitred and jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete
as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and
dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum
thickness of powder coating 50 micron) including cost of materials, labour, usage charges of
machinery complete as per specifications. (Page No.86 Item No.11.35.1.2 Common SR 2021-22
Vol-2) | Kg | 426.8 | 426.8 | 820.8 | False | None | None | False | None | False | 350317.44 | 0 | | 2864240 | 93161 | None | 052 | Cleaning of glazed tiles. (PAGE NO. 257 / ITEM NO. 37.34) | Sqm | 73.44 | 73.44 | 63.36 | False | None | None | False | None | False | 4653.1584 | 0 | | 2864241 | 93161 | None | 053 | Providing and fixing bright finished brass double acting spring hinges with
necessary brass screws etc. complete 20.26 150mm | No | 699.6 | 699.6 | 20.0 | False | None | None | False | None | False | 13992.0 | 0 | | 2864242 | 93161 | None | 054 | Repairing and fixing shutters (panelled or glazed) to doors, windows,ventilators and cupboards 20.104 | Sqm | 831.6 | 831.6 | 41.04 | False | None | None | False | None | False | 34128.864 | 0 | | 2864243 | 93161 | None | 055 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre
capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank
and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre
capacity of tank including marking the date of cleaning on the side of tank body with the help of
stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge.
(The old date already written on tank should be removed with paint remover or black paint and if
date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10
per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by
contractor at his own cost and nothing extra will be paid on this account)(Page No.177 Item
No.20.39 Common SR 2021-22 Vol-2) | Ltr | 0.28 | 0.28 | 17460.4 | False | None | None | False | None | False | 4888.912 | 0 | | 2864244 | 93161 | None | 056 | Providing and applying two coats of approved brand and shade Apex Ultima
paint on External wall surface to Chief Secretary/Ministers Residence after throughly brooming
the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the
surface even and sand paper smooth, including the cost of materials, labour charges complete as per the specifications and the directions of the Engineer-in-charge of the Work.(ADR No.2420Sl.No.1) | Sqm | 204.0 | 204.0 | 471.09 | False | None | None | False | None | False | 96102.36 | 0 | | 2864245 | 93161 | None | 057 | Supplying and fixing 25mm dia curtain rods of approved quality and design etc., complete as per directions of the Engineer in charge of the work. (ADR No.8462 Dtd:17.01.2014 Sl.No.9) | Rmtr | 2100.0 | 2100.0 | 39.96 | False | None | None | False | None | False | 83916.0 | 0 | | 2864246 | 93161 | None | 001 | Dismantling tile work in floors and roofs laid in cement mortar including
stacking material to the appropriate disposal area as per direction of Engineer-in-charge For
thickness of tiles 10 mm to 25 mm (Page No.165 Item No.19.22.1 2021-22 Common SR Vol-2)9
I.No.6.2) | Sqm | 40.7 | 40.7 | 7.22 | False | None | None | False | None | False | 293.854 | 0 | | 2864247 | 93161 | None | 002 | Dismantling old plaster or skirting raking out joints and cleaning the surface for
plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge(Page No.169 Item No.19.53 2021-22 Common SR Vol-2) | Sqm | 31.9 | 31.9 | 7.22 | False | None | None | False | None | False | 230.318 | 0 |
|