createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709194116924 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1910.00 emd 153000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 11-03-2024 16:00:00 tenderQueryClose 07-03-2024 16:00:00 technicalBidOpen 12-03-2024 16:30:00 publishedDate 01-03-2024 11:35:11 publishedByPost PWD_EE_DIV_HSPT publishedByUser KPE10175 - RAVINDRA R KATTI bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Executive Engineer splitEmdRequiredYn True emdBankGuarantee 103000.00 emdCash 50000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 080394200231 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1709194116926 version 21 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT6907/CALL-2 title Construction of Anganwadi Building (A) at B.T.Guddi(18.00 lakhs), Suladahalli (A) (18.00 lakhs), Hulikere (B) (18.00 lakhs), Emblivaddarahatti(18.00 lakhs) and Piccharahatti(18.00 lakhs) Village, Kudligi Taluk Vijayanagara District.(This work is reserved for SC Catogery) description Construction of Anganwadi Building (A) at B.T.Guddi(18.00 lakhs), Suladahalli (A) (18.00 lakhs), Hulikere (B) (18.00 lakhs), Emblivaddarahatti(18.00 lakhs) and Piccharahatti(18.00 lakhs) Village, Kudligi Taluk Vijayanagara District.(This work is reserve for SC Catogery) category WORKS categoryText Works ecv 7616270.60 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1694 locationName PWD Division Office Hosapete provisionalAmount 9000000.0 groupOverheadTotal 0.0 fileNumber AEE/PWD/KDL/KKRDB/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709194117000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building (A) at B.T.Guddi Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2859361 92882 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2859362 92882 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2859363 92882 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2859364 92882 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2859365 92882 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2859366 92882 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2859367 92882 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2859368 92882 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2859369 92882 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2859370 92882 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2859371 92882 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2859372 92882 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2859373 92882 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2859374 92882 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2859375 92882 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2859376 92882 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2859377 92882 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2859378 92882 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2859379 92882 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2859380 92882 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2859381 92882 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2859382 92882 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2859383 92882 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2859384 92882 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2859385 92882 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2859386 92882 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2859387 92882 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2859388 92882 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2859389 92882 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2859390 92882 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2859391 92882 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2859392 92882 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2859393 92882 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2859394 92882 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2859395 92882 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2859396 92882 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2859397 92882 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2859398 92882 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2859399 92882 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2859400 92882 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2859401 92882 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2859402 92882 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2859403 92882 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2859404 92882 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2859405 92882 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2859406 92882 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2859407 92882 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2859408 92882 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2859409 92882 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2859410 92882 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2859411 92882 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2859412 92882 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2859413 92882 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1709194117000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building (A) at Suladahalli Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2859414 92883 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2859415 92883 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2859416 92883 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2859417 92883 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2859418 92883 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2859419 92883 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2859420 92883 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2859421 92883 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2859422 92883 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2859423 92883 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2859424 92883 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2859425 92883 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2859426 92883 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2859427 92883 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2859428 92883 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2859429 92883 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2859430 92883 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2859431 92883 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2859432 92883 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2859433 92883 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2859434 92883 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2859435 92883 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2859436 92883 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2859437 92883 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2859438 92883 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2859439 92883 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2859440 92883 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2859441 92883 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2859442 92883 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2859443 92883 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2859444 92883 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2859445 92883 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2859446 92883 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2859447 92883 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2859448 92883 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2859449 92883 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2859450 92883 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2859451 92883 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2859452 92883 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2859453 92883 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2859454 92883 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2859455 92883 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2859456 92883 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2859457 92883 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2859458 92883 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2859459 92883 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2859460 92883 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2859461 92883 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2859462 92883 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2859463 92883 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2859464 92883 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2859465 92883 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2859466 92883 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1709194117000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building (B) at Hulikere Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2859467 92884 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2859468 92884 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2859469 92884 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2859470 92884 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2859471 92884 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2859472 92884 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2859473 92884 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2859474 92884 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2859475 92884 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2859476 92884 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2859477 92884 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2859478 92884 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2859479 92884 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2859480 92884 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2859481 92884 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2859482 92884 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2859483 92884 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2859484 92884 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2859485 92884 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2859486 92884 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2859487 92884 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2859488 92884 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2859489 92884 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2859490 92884 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2859491 92884 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2859492 92884 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2859493 92884 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2859494 92884 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2859495 92884 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2859496 92884 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2859497 92884 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2859498 92884 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2859499 92884 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2859500 92884 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2859501 92884 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2859502 92884 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2859503 92884 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2859504 92884 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2859505 92884 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2859506 92884 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2859507 92884 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2859508 92884 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2859509 92884 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2859510 92884 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2859511 92884 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2859512 92884 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2859513 92884 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2859514 92884 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2859515 92884 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2859516 92884 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2859517 92884 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2859518 92884 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2859519 92884 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1709194117000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building at Emblivaddarahatti Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2859520 92885 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2859521 92885 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2859522 92885 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2859523 92885 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2859524 92885 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2859525 92885 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2859526 92885 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2859527 92885 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2859528 92885 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2859529 92885 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2859530 92885 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2859531 92885 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2859532 92885 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2859533 92885 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2859534 92885 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2859535 92885 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2859536 92885 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2859537 92885 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2859538 92885 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2859539 92885 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2859540 92885 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2859541 92885 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2859542 92885 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2859543 92885 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2859544 92885 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2859545 92885 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2859546 92885 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2859547 92885 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2859548 92885 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2859549 92885 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2859550 92885 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2859551 92885 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2859552 92885 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2859553 92885 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2859554 92885 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2859555 92885 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2859556 92885 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2859557 92885 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2859558 92885 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2859559 92885 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2859560 92885 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2859561 92885 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2859562 92885 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2859563 92885 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2859564 92885 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2859565 92885 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2859566 92885 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2859567 92885 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2859568 92885 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2859569 92885 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2859570 92885 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2859571 92885 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2859572 92885 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1709194117000 1 None None Buildings Detailed Estimate for the Construction of Anganwadi Building at Piccharahatti Village, Kudligi Taluk Vijayanagara District. 1523254.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2859573 92886 None CSR 2023-24 Pg-188 Item No.19.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge Sqm 275.1 275.1 6.84 False None None False None False 1881.684 0 2859574 92886 None CSR 2023-24 Pg-187 Item No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge Cum 2547.3 2547.3 3.6 False None None False None False 9170.28 0 2859575 92886 None 2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 506.1 506.1 14.16 False None None False None False 7166.376 0 2859576 92886 None CSR .2023-24 V-1 , Pg-5 Item No.1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 58.38 False None None False None False 14834.358 0 2859577 92886 None CSR .2023-24 Pg-15 Item No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 8.91 False None None False None False 56030.0895 0 2859578 92886 None CSR . 2023-24 Pg-9 Item No.5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 12.17 False None None False None False 71700.1635 0 2859579 92886 None CSR .2023-24 Pg-9 Item No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2859580 92886 None CSR .2023-24 V-1, Pg-17 Item No.2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates\ Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2859581 92886 None CSR .2023-24 Pg-44 Item No .8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 21.92 False None None False None False 5869.08 0 2859582 92886 None CSR .2023-24 V-1, Pg-7 Item No.1.11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 454.65 454.65 83.55 False None None False None False 37986.0075 0 2859583 92886 None CSR .2023-24 Pg-14 Item No.6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 28.07 False None None False None False 234874.3215 0 2859584 92886 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 7129.46 7129.46 6.08 False None None False None False 43347.1168 0 2859585 92886 None CSR .2023-24 Pg-15 Item No.2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Cum 11222.3 11222.3 5.59 False None None False None False 62732.657 0 2859586 92886 None CSR .2023-24 Pg-16 Item No.2.3.1 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7303.07 7303.07 3.33 False None None False None False 24319.2231 0 2859587 92886 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 4.35 False None None False None False 48452.04 0 2859588 92886 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 8.11 False None None False None False 84686.6475 0 2859589 92886 None CSR .2023-24 Pg-16 Item No.2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2859590 92886 None CSR .2023-24 V-1, Pg-18 I No.2.11A Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sqm 93.93 93.93 2377.4 False None None False None False 223309.182 0 2859591 92886 None CSR .2023-24 V-2, Pg-41 I No. 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.75 307.75 299.18 False None None False None False 92072.645 0 2859592 92886 None CSR .2023-24 V-2, Pg- 50 I No.8.51 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2859593 92886 None CSR .2023-24 V-2, Pg-77 I No. 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2859594 92886 None CSR .2023-24 Pg- 80 I No. 11.13.1 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2859595 92886 None CSR .2023-24 Pg-79 I No. 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2859596 92886 None CSR .2023-24 Pg-85 I No. 11.34 A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding CSR .2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Sqm 137.55 137.55 11.34 False None None False None False 1559.817 0 2859597 92886 None CSR .2023-24 V-2, Pg-60 I No.9.12.2 Rs. 1145.00s Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Sqm 1152.9 1152.9 37.65 False None None False None False 43406.685 0 2859598 92886 None CSR .2023-24 V-2, Pg-60 I No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 811.65 811.65 10.31 False None None False None False 8368.1115 0 2859599 92886 None CSR .2023-24 V-2, Pg.48 I No.8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 133.35 133.35 239.65 False None None False None False 31957.3275 0 2859600 92886 None CSR .2023-24 V-2, Pg- 46 I No.8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2859601 92886 None PWD SR. 2023-24 Pg- 82 I No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kgs 144.9 144.9 60.0 False None None False None False 8694.0 0 2859602 92886 None PWD SR. 2023-24 Pg- 49 I No.8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2859603 92886 None CSR .2023-24 V-2, Pg-48 I No .8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 48.54 False None None False None False 5861.205 0 2859604 92886 None RWSS SR 2012-13 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover Nos 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2859605 92886 None CSR .2023-24 V-2, Pg-63 I No .9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2859606 92886 None PWD SR. 2023-24 Pg- 131 I No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2859607 92886 None PWD SR. 2023-24 Pg- 123 I No.13.34A Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2859608 92886 None PWD SR. 2023-24 Pg- 122 I No.13.32.3 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2859609 92886 None PWD SR. 2023-24, Vol-5 Pg- 158 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments. Each 10762.5 10762.5 1.0 False None None False None False 10762.5 0 2859610 92886 None PWD SR. 2023-24 Pg-111 I No.13, H140A Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2216.55 2216.55 1.0 False None None False None False 2216.55 0 2859611 92886 None PWD EL SR. 2023-24 Pg- 2 I No.1.2.2 ELECTRICAL ITEMS Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 81.9 81.9 35.0 False None None False None False 2866.5 0 2859612 92886 None PWD EL SR.2022-23 Pg- 2 I No.1.3.2 Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick Mtr 82.95 82.95 35.0 False None None False None False 2903.25 0 2859613 92886 None PWD EL SR. 2023-24 Pg- 2 I No.1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. Nos 169.05 169.05 5.0 False None None False None False 845.25 0 2859614 92886 None PWD EL SR. 2023-24 Pg-52 I No.12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder Nos 34.65 34.65 5.0 False None None False None False 173.25 0 2859615 92886 None PWD EL SR. 2023-24 Pg- 46 I No.11.10.2 Supplying &fixing o fSurface mounting type retrofittype- tube.WcomprisingofLED linear source with CCT 6500 degree K, CRI less than 70 percentage efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322-IEC60598,LM 79 and LM 80. The LED are driven by HF electronic driver integrated in thesystem, with PF greater than 0.95, power loss should less than 5 percentage of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percentage , Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL-CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 - Pg- 46 I No.11.10.2 Rs.330.00-Nos Nos 346.5 346.5 2.0 False None None False None False 693.0 0 2859616 92886 None PWD EL SR. 2023-24 Pg- 30 I No.6.3.1 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) Nos 3133.2 3133.2 3.0 False None None False None False 9399.6 0 2859617 92886 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.1 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit - casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet- gang box, the other end of the wires shall be terminated with sufficient loose Nos 299.25 299.25 12.0 False None None False None False 3591.0 0 2859618 92886 None PWD EL SR. 2023-24 Pg- 05 I No.2.1.2 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 413.7 413.7 10.0 False None None False None False 4137.0 0 2859619 92886 None PWD EL SR. 2020-23 Pg- 05 I No.2.1.3 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 598.5 598.5 8.0 False None None False None False 4788.0 0 2859620 92886 None PWD EL SR. 2023-24 Pg- 8 I.No.3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way Point 154.35 154.35 8.0 False None None False None False 1234.8 0 2859621 92886 None PWD EL SR. 2023-24 Pg- 09 I No.3.9 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 0.37 0.37 500.0 False None None False None False 185.0 0 2859622 92886 None PWD EL SR. 2023-24 Pg-17 I No.5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP Nos 1113.0 1113.0 1.0 False None None False None False 1113.0 0 2859623 92886 None PWD EL SR. 2023-24 Pg-23 I No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specifie Nos 2280.6 2280.6 1.0 False None None False None False 2280.6 0 2859624 92886 None 1... KEB Charges for meter fixing and Deposit Each 14000.0 14000.0 1.0 False None None False None False 14000.0 0 2859625 92886 None 2... Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709194117000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709194117000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709194117000 0 None None ELIGIBILITY In accordance with the notification of Government of Karnataka No. PDS81PMS/2023, Bengaluru dated 10.10.2023 this work is reserved for Scheduled Caste contractors, and only Scheduled caste contractors shall have to participate in the tender. The Scheduled caste contractors participating in the tender should compulsorily furnish the Caste certificate issued by a competent authority, failing which the tender is liable for rejection None 1709194117000 0 None None ELIGIBILITY The schedule Caste contractor participating in the tender shall be domicile of State of Karnataka for more than 10 (ten) years None 1709194117000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1709194117000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1709194117000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1709194117000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1709194117000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1709194117000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1709194117000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification. None 1709194117000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive). None 1709194117000 0 None None ELIGIBILITY The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification. None 1709194117000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder None 1709194117000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason. None 1709194117000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing KPP-Portal None 1709194117000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1709194117000 0 None None ELIGIBILITY The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts None 1709194117000 0 None None ELIGIBILITY As per circular of Govt. of Karnataka Government Order No. PWD 107 CRM 2013, Bangalore, Dated: 20.02.2014, If the tenderer uploads the Bank Guarantee, but does not produce original at the time of technical scrutiny, such tenders will not be disqualified either in the technical bid stage or financial bid stage. But the qualified tenderer (L1) must submit the original copy of the BG at the time of agreement. None 1709194117000 0 None None ELIGIBILITY The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules and any modifications before and after execution of agreement None 1709194117000 0 None None ELIGIBILITY After the award of the contract, the contractor has to furnish the details in respect of labour employed and the EPF details for this work in every RA bill. None 1709194117000 0 None None ELIGIBILITY Bidders are advised to note that, 18% GST will be added to the contract amount. None 1709194117000 0 None None ELIGIBILITY The Increse in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1709194117000 0 None None ELIGIBILITY The bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected. None 1709194117000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1709194117000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2023-24 in the Technical Qualification Criteria mentioned in the next section. None 1709194117000 0 None None ELIGIBILITY The work should be completed in 09(Nine) Months ( including monsoon) None 1709194117000 0 None None ELIGIBILITY The earnest money deposit shall be in two parts i.e.,Part (1) Rs.50,000 by e.payment and balance Part (2) Rs. Balance amount as specified in the KPP portal shall be in the form of Bank Guarantee in the prescribed format obtained from the Nationalized / Schedule Bank FDR or specified small savings instrument pledged to the Executive Engineer, Public Works Department Division, HOSAPETE payable at HOSAPETE before the prescribed date and time of opening of Technical Bid without fail None 1709194560000 0 None None ELIGIBILITY Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalid thereof shall be referred and settled under the Arbitration centre Karnataka (Domastic and international Rules 2012,by one or more arbitratiors appointed in accordance with its rules None 1709194564000 0 None None ELIGIBILITY The deffect liability period is one year from the date of actual completion of work. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Information on works which are yet to be completed Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information on works which are yet to be completed None None None None Information of the works for which Tender acceptance letters are received. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information of the works for which Tender acceptance letters are received. None None None None Information of the works for which Tenderer has submitted Tender Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Information of the works for which Tenderer has submitted Tender None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 b) Executed in any one year, the following minimum quantities of work:1 Earth work /Embankment/Sub Grade/Shoulder 568.00Cum 2. CC/RCC/DLC/CC Pavement 154.00Cum 3 SSM/BBM/RSM 226.00 Cum 4 Steel 9554.00 Kgs 5 Plastering 1200.00 Sqm 6 flooring 192.00 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 b) Satisfactorily completed, as prime contractor, at least Any Constriction work to an extent of 25% of the cost of the work I.ef value not less than Rs. 19.04 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Principal Place of Business Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Principal Place of Business None None None None Latest Income Tax Clearance Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 a) Achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.76.16 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid Assets and /or availability of credit facilities of no less than Rs.22.85 lakhs (Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Registration Certificate True Technical Bid Annual Turnover Certificate Not below the rank of Charterd Accountant,The bidder should mention the UDIN No True Technical Bid Single Work Done Certificate Not Below the rank of Executive Engineer True Technical Bid Quantity Wise Work Done Certificate True Technical Bid Liquid Assets True Technical Bid GST CERTIFICATE True Technical Bid Principal Place of Business. True Technical Bid Tender Bid Capacity True Technical Bid List of Existing commitments & Ongoing works- Format-5 True Technical Bid List of works for which tenders acceptence letter received-Format-6 True Technical Bid List of works for which tenders already submitted-Format-7 True Technical Bid Profit and loss ac & Balance sheets for 5 years True Technical Bid Income Tax returns for 5 years True Technical Bid Reserved Category Certificate True Technical Bid Domacial Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None