createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709376175667 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3280.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 16-03-2024 16:00:00 tenderQueryClose 06-03-2024 16:00:00 technicalBidOpen 18-03-2024 16:00:00 publishedDate 02-03-2024 18:20:28 publishedByPost KHB_EE_CO_BNG publishedByUser KPE11677 - SHIVASHANKARAPPA K H bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 07-03-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVASHANKARAPPA K H splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022273511 mobileNumber 8002227351 tenderSupplierList None
tenderSchedule	createdTs 1709376175686 version 6 createdDate None modifiedDate None tenderNumber KHB/2023-24/BD/WORK_INDENT197 title Construction of Post Metric Girls Hostel 2nd Phase at Sagara Taluk, Shivamogga District description Construction of Post Metric Girls Hostel 2nd Phase at Sagara Taluk, Shivamogga District category WORKS categoryText Works ecv 13083500.00 deptName Karnataka Housing Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5488 locationName KHB Central Office Bengaluru provisionalAmount 13083500.0 groupOverheadTotal None fileNumber 750/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709376176000 0 None None Buildings Construction of Post Metric Girls Hostel 2nd Phase at Sagara Taluk, Shivamogga District 13083500.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2887319 94492 None code01 BUILDING CIVIL WORK--Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) RCC COLUMN --FIRST FLOOR Cum 13159.36 13159.36 6.52 False None None False None False 85799.0272 0 2887320 94492 None code02 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) RCC COLUMN --SECOND FLOOR Cum 13289.65 13289.65 18.16 False None None False None False 241340.044 0 2887321 94492 None code03 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) RCC COLUMN --TERRACE FLOOR Cum 13419.94 13419.94 1.58 False None None False None False 21203.5052 0 2887322 94492 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING)-RCC COLUMN(DUMMY COLUMNS)-Terrace floor Cum 12192.28 12192.28 4.39 False None None False None False 53524.1092 0 2887323 94492 None code05 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING)-RCC BEAM--FIRST FLOOR Cum 12385.28 12385.28 5.88 False None None False None False 72825.4464 0 2887324 94492 None code06 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING)-RCC BEAM--SECOND FLOOR Cum 12507.91 12507.91 21.29 False None None False None False 266293.4039 0 2887325 94492 None code07 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING)-RCC BEAM--TERRACE FLOOR Cum 12630.54 12630.54 0.9 False None None False None False 11367.486 0 2887326 94492 None code08 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) -RCC LINTEL--FIRST FLOOR Cum 12385.28 12385.28 2.77 False None None False None False 34307.2256 0 2887327 94492 None code09 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) -RCC LINTEL--SECOND FLOOR Cum 12507.91 12507.91 3.15 False None None False None False 39399.9165 0 2887328 94492 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) -RCC LINTEL--TERRACE FLOOR Cum 12630.54 12630.54 0.39 False None None False None False 4925.9106 0 2887329 94492 None code11 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-FIRST FLOOR Cum 7032.67 7032.67 1.39 False None None False None False 9775.4113 0 2887330 94492 None code12 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-SECOND FLOOR Cum 7102.3 7102.3 1.57 False None None False None False 11150.611 0 2887331 94492 None code13 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-TERRACE FLOOR Cum 7171.93 7171.93 31.45 False None None False None False 225557.1985 0 2887332 94492 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING & SHUTTERING) RCC STAIRCASE--SECOND FLOOR Cum 11726.16 11726.16 3.71 False None None False None False 43504.0536 0 2887333 94492 None code15 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications-FIRST FLOOR Sqm 1481.87 1481.87 259.59 False None None False None False 384678.6333 0 2887334 94492 None code16 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specificationsSECOND FLOOR Sqm 1496.54 1496.54 718.87 False None None False None False 1075817.7098 0 2887335 94492 None code17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications-TERRACE FLOOR Sqm 1511.22 1511.22 60.42 False None None False None False 91307.9124 0 2887336 94492 None code18 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-SECOND FLOOR Sqm 1406.29 1406.29 81.0 False None None False None False 113909.49 0 2887337 94492 None code19 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-TERRACE FLOOR Sqm 1420.08 1420.08 48.0 False None None False None False 68163.84 0 2887338 94492 None code20 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.SECOND FLOOR Sqm 1261.21 1261.21 25.2 False None None False None False 31782.492 0 2887339 94492 None code21 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-(RATE INCLUDING CENTERING & SHUTTERING)-RCC SLAB-FIRST FLOOR Cum 11611.2 11611.2 38.34 False None None False None False 445173.408 0 2887340 94492 None code22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-(RATE INCLUDING CENTERING & SHUTTERING)-RCC SLAB SECOND FLOOR Cum 11726.16 11726.16 62.5 False None None False None False 732885.0 0 2887341 94492 None code23 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-(RATE INCLUDING CENTERING & SHUTTERING)-RCC SLAB TERRACE FLOOR Cum 11841.13 11841.13 5.1 False None None False None False 60389.763 0 2887342 94492 None code24 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-(RATE INCLUDING CENTERING & SHUTTERING)-RCC CHAJJA-FIRST FLOOR Cum 11224.16 11224.16 1.4 False None None False None False 15713.824 0 2887343 94492 None code25 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-(RATE INCLUDING CENTERING & SHUTTERING)-RCC CHAJJA-SECOND FLOOR Cum 11335.29 11335.29 5.0 False None None False None False 56676.45 0 2887344 94492 None code26 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-(RATE INCLUDING CENTERING & SHUTTERING)-RCC CHAJJA-TERRACE FLOOR Cum 11446.42 11446.42 0.18 False None None False None False 2060.3556 0 2887345 94492 None code27 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a)Buildings Tonne 101193.76 101193.76 19.1 False None None False None False 1932800.816 0 2887346 94492 None code28 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications-FIRST FLOOR Cum 112667.52 112667.52 0.55 False None None False None False 61967.136 0 2887347 94492 None code29 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications-SECOND FLOOR Cum 113794.2 113794.2 1.51 False None None False None False 171829.242 0 2887348 94492 None code30 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications-TERRACE FLOOR Cum 114898.56 114898.56 0.05 False None None False None False 5744.928 0 2887349 94492 None code31 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FIRST FLOOR Sqm 7617.5 7617.5 18.0 False None None False None False 137115.0 0 2887350 94492 None code32 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-SECOND FLOOR Sqm 7693.68 7693.68 33.47 False None None False None False 257507.4696 0 2887351 94492 None code33 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-TERRACE FLOOR Sqm 7692.92 7692.92 2.43 False None None False None False 18693.7956 0 2887352 94492 None code34 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FIRST FLOOR Sqm 6469.33 6469.33 8.64 False None None False None False 55895.0112 0 2887353 94492 None code35 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-SECOND FLOOR Sqm 6534.03 6534.03 16.56 False None None False None False 108203.5368 0 2887354 94492 None code36 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-FIRST FLOOR Sqm 3757.85 3757.85 12.9 False None None False None False 48476.265 0 2887355 94492 None code37 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-SECOND FLOOR Sqm 3795.42 3795.42 41.39 False None None False None False 157092.4338 0 2887356 94492 None code38 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-TERRACE FLOOR Sqm 3795.05 3795.05 2.15 False None None False None False 8159.3575 0 2887357 94492 None code39 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-FIRST FLOOR Kg 190.04 190.04 426.0284 False None None False None False 80962.437136 0 2887358 94492 None code40 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-SECOND FLOOR Kg 191.94 191.94 800.4 False None None False None False 153628.776 0 2887359 94492 None code41 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-TERRACE FLOOR Kg 191.92 191.92 43.74 False None None False None False 8394.5808 0 2887360 94492 None code42 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete-FIRST FLOOR Sqm 365.38 365.38 207.5 False None None False None False 75816.35 0 2887361 94492 None code43 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing completeSECOND FLOOR Sqm 369.03 369.03 456.46 False None None False None False 168447.4338 0 2887362 94492 None code44 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete-TERRACE FLOOR Sqm 369.0 369.0 33.97 False None None False None False 12534.93 0 2887363 94492 None code45 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 414.02 414.02 482.69 False None None False None False 199843.3138 0 2887364 94492 None code46 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 418.12 418.12 934.76 False None None False None False 390841.8512 0 2887365 94492 None code47 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 418.12 418.12 49.14 False None None False None False 20546.4168 0 2887366 94492 None code48 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 337.04 337.04 259.29 False None None False None False 87391.1016 0 2887367 94492 None code49 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in-Charge.-FIRST FLOOR Sqm 507.91 507.91 292.5 False None None False None False 148563.675 0 2887368 94492 None code50 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in-Charge.-SECOND FLOOR Sqm 512.94 512.94 587.25 False None None False None False 301224.015 0 2887369 94492 None code51 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in-Charge.-TERRACE FLOOR Sqm 517.97 517.97 302.4 False None None False None False 156634.128 0 2887370 94492 None code52 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in-Charge.-OPEN TERRACE PLASTERING Sqm 517.97 517.97 416.69 False None None False None False 215832.9193 0 2887371 94492 None code53 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-SECOND FLOOR Cum 2304.22 2304.22 15.74 False None None False None False 36268.4228 0 2887372 94492 None code54 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 636.16 636.16 25.0 False None None False None False 15904.0 0 2887373 94492 None code55 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top cover Crimp curve Sqm 476.0 476.0 3.0 False None None False None False 1428.0 0 2887374 94492 None code56 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top cover Gutter (600 mm over all girth) m 1202.88 1202.88 20.0 False None None False None False 24057.6 0 2887375 94492 None code57 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester Ridges plain (500 - 600mm) m 505.12 505.12 10.0 False None None False None False 5051.2 0 2887376 94492 None code58 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 164.64 164.64 125.0 False None None False None False 20580.0 0 2887377 94492 None code59 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.-FIRST FLOOR Sqm 3226.18 3226.18 71.2 False None None False None False 229704.016 0 2887378 94492 None code60 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.SECOND FLOOR Sqm 3258.44 3258.44 156.06 False None None False None False 508512.1464 0 2887379 94492 None code61 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.-- Size of Tile 800x800 mm-FIRST FLOOR Sqm 1421.92 1421.92 114.9 False None None False None False 163378.608 0 2887380 94492 None code62 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.-- Size of Tile 800x800 mm-SECONDFLOOR Sqm 1436.14 1436.14 196.31 False None None False None False 281928.6434 0 2887381 94492 None code63 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete-SECOND FLOOR Sqm 1015.59 1015.59 62.42 False None None False None False 63393.1278 0 2887382 94492 None code64 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.-SECOND FLOOR Sqm 1263.49 1263.49 259.29 False None None False None False 327610.3221 0 2887383 94492 None code65 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications-SECOND FLOOR Sqm 1884.96 1884.96 12.9 False None None False None False 24315.984 0 2887384 94492 None code66 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with ce ment mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications.SECOND FLOOR Sqm 4888.81 4888.81 6.72 False None None False None False 32852.8032 0 2887385 94492 None code67 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-FIRST FLOOR Sqm 113.12 113.12 690.19 False None None False None False 78074.2928 0 2887386 94492 None code68 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-SECOND FLOOR Sqm 114.25 114.25 1391.22 False None None False None False 158946.885 0 2887387 94492 None code69 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-TERRACE FLOOR Sqm 114.24 114.24 69.02 False None None False None False 7884.8448 0 2887388 94492 None code70 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 178.73 178.73 207.5 False None None False None False 37086.475 0 2887389 94492 None code71 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.SECOND FLOOR Sqm 180.52 180.52 456.46 False None None False None False 82400.1592 0 2887390 94492 None code72 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 180.5 180.5 20.75 False None None False None False 3745.375 0 2887391 94492 None code73 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 178.73 178.73 482.69 False None None False None False 86271.1837 0 2887392 94492 None code74 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 180.52 180.52 934.76 False None None False None False 168742.8752 0 2887393 94492 None code75 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 180.5 180.5 48.27 False None None False None False 8712.735 0 2887394 94492 None code76 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 196.83 196.83 292.5 False None None False None False 57572.775 0 2887395 94492 None code77 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 198.8 198.8 587.25 False None None False None False 116745.3 0 2887396 94492 None code78 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 198.78 198.78 29.25 False None None False None False 5814.315 0 2887397 94492 None code79 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 188.91 188.91 26.64 False None None False None False 5032.5624 0 2887398 94492 None code80 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 190.8 190.8 50.03 False None None False None False 9545.724 0 2887399 94492 None code81 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 190.78 190.78 2.66 False None None False None False 507.4748 0 2887400 94492 None code82 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.-FIRST FLOOR Sqm 63.35 63.35 27.09 False None None False None False 1716.1515 0 2887401 94492 None code83 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.-SECOND FLOOR Sqm 63.98 63.98 49.67 False None None False None False 3177.8866 0 2887402 94492 None code84 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.-TERRACE FLOOR Sqm 63.97 63.97 2.71 False None None False None False 173.3587 0 2887403 94492 None code85 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 152.71 152.71 27.09 False None None False None False 4136.9139 0 2887404 94492 None code86 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 154.24 154.24 49.67 False None None False None False 7661.1008 0 2887405 94492 None code87 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 154.22 154.22 2.71 False None None False None False 417.9362 0 2887406 94492 None code88 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.-FIRST FLOOR Kg 639.13 639.13 43.2 False None None False None False 27610.416 0 2887407 94492 None code89 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.-SECOND FLOOR Kg 645.52 645.52 116.8 False None None False None False 75396.736 0 2887408 94492 None code90 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 110mm dia., 6 kg/sqcm m 460.32 460.32 60.0 False None None False None False 27619.2 0 2887409 94492 None code91 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.(Polyurethane based Single Component for New Surface)-SECOND FLOOR Sqm 933.34 933.34 72.0 False None None False None False 67200.48 0 2887410 94492 None code92 Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : 150 mm Each 677.74 677.74 56.0 False None None False None False 37953.44 0 2887411 94492 None code93 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1083.56 1083.56 14.0 False None None False None False 15169.84 0 2887412 94492 None code94 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos 244.11 244.11 28.0 False None None False None False 6835.08 0 2887413 94492 None code95 roviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 133.9 133.9 12.0 False None None False None False 1606.8 0 2887414 94492 None code96 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms Nos 56.65 56.65 28.0 False None None False None False 1586.2 0 2887415 94492 None code97 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm Nos 105.06 105.06 48.0 False None None False None False 5042.88 0 2887416 94492 None code98 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10mm Nos 448.05 448.05 14.0 False None None False None False 6272.7 0 2887417 94492 None code99 PLUMBING AND SANITARY-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required-White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Nos 5470.08 5470.08 1.0 False None None False None False 5470.08 0 2887418 94492 None code100 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete Nos 12570.88 12570.88 5.0 False None None False None False 62854.4 0 2887419 94492 None code101 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Nos 4615.52 4615.52 8.0 False None None False None False 36924.16 0 2887420 94492 None code102 Providing and fixing 100 mm sand cast Iron grating for gully trap. Nos 52.64 52.64 20.0 False None None False None False 1052.8 0 2887421 94492 None code103 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Nos 812.0 812.0 15.0 False None None False None False 12180.0 0 2887422 94492 None code104 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. Nos 947.52 947.52 20.0 False None None False None False 18950.4 0 2887423 94492 None code105 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-25 mm nominal bore Nos 1098.0 1098.0 1.0 False None None False None False 1098.0 0 2887424 94492 None code106 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-32 mm nominal bore Nos 1196.0 1196.0 1.0 False None None False None False 1196.0 0 2887425 94492 None code107 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-40 mm nominal bore Nos 1404.0 1404.0 1.0 False None None False None False 1404.0 0 2887426 94492 None code108 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-50 mm nominal bore Nos 1710.0 1710.0 2.0 False None None False None False 3420.0 0 2887427 94492 None code109 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-65 mm nominal bore Nos 2822.0 2822.0 2.0 False None None False None False 5644.0 0 2887428 94492 None code110 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-80 mm nominal bore Nos 4154.0 4154.0 2.0 False None None False None False 8308.0 0 2887429 94492 None code111 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1366.4 1366.4 8.0 False None None False None False 10931.2 0 2887430 94492 None code112 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Nos 555.52 555.52 8.0 False None None False None False 4444.16 0 2887431 94492 None code113 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 160mm dia., 6 kg/sqcm & class 3- m 692.16 692.16 20.0 False None None False None False 13843.2 0 2887432 94492 None code114 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 460.32 460.32 30.0 False None None False None False 13809.6 0 2887433 94492 None code115 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 90mm dia., 6 kg/sqcm & class 3 m 329.28 329.28 45.0 False None None False None False 14817.6 0 2887434 94492 None code116 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 50 mm dia-Including gyser and solar line m 874.72 874.72 65.0 False None None False None False 56856.8 0 2887435 94492 None code117 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 32 mm dia-Including gyser and solar line m 448.0 448.0 65.0 False None None False None False 29120.0 0 2887436 94492 None code118 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 25 mm dia m 356.16 356.16 65.0 False None None False None False 23150.4 0 2887437 94492 None code119 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 20 mm dia m 271.04 271.04 45.0 False None None False None False 12196.8 0 2887438 94492 None code120 Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the PE Inspection chambres with lid consisting of inlet & outlet arrangements with base, riser of min. 0.42 m depth which includes earth work, fixing in CC-1:2:4 with appurtenances., complete. (c) civil works like Earthwork excavation for the pipeline trenches for laying of PVC-U pipes for the house connections in all types of soils , disintegrated rock,soft rock, hard rock, including cutting of any road using , crossing drains, compound, Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, c.c. wood work, steel work, including T & P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable and stacking the serviceable material with all lifts and lead , restoring the damaged portions inside or outside the property premises, refilling the portions of trenches that are dug open including linking to existing sewer network with appurtenances. complete.Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with all lead and lifts. 110 mm dia Nos 9110.08 9110.08 1.0 False None None False None False 9110.08 0 2887439 94492 None code121 KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM and testing complete as per specifications. Specification No.KBS 13.22 l 10.08 10.08 2000.0 False None None False None False 20160.0 0 2887440 94492 None code122 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3 density Rock wool insulation with 22SWG Aluminium cladding.-200L Each 49934.4 49934.4 1.0 False None None False None False 49934.4 0 2887441 94492 None code123 INTERNAL ELECTRIFICATION-Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory-19/20mm Dia 2mm Thick m 67.98 67.98 320.0 False None None False None False 21753.6 0 2887442 94492 None code124 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory25mm dia 2mm Thick m 80.34 80.34 360.0 False None None False None False 28922.4 0 2887443 94492 None code125 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory-19/20mm Dia 2mm Thick m 70.04 70.04 221.0 False None None False None False 15478.84 0 2887444 94492 None code126 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory-25mm dia 2mm Thick m 81.37 81.37 231.0 False None None False None False 18796.47 0 2887445 94492 None code127 Supplying and fixing PVC/ Metal Conduit Deep Junction Boxes-19/20 mm Deep Junction Box Each 50.47 50.47 110.0 False None None False None False 5551.7 0 2887446 94492 None code128 Supplying and fixing PVC/ Metal Conduit Deep Junction Boxes-25 mm Deep Junction Box Each 57.68 57.68 40.0 False None None False None False 2307.2 0 2887447 94492 None code129 Supplying and fixing PVC Casing and capping on the wall or ceiling using materials like bend , screws at an interval 0f 300 mm etc-20 mm m 28.84 28.84 68.0 False None None False None False 1961.12 0 2887448 94492 None code130 Supplying and fixing PVC Casing and capping on the wall or ceiling using materials like bend , screws at an interval 0f 300 mm etc-25 mm m 36.05 36.05 58.0 False None None False None False 2090.9 0 2887449 94492 None code131 Supplying PVC /GI flexible conduit pipe …. Mm dia fixing on surface cover inverted tapared wodden plugs or phill plugs or rawl plugs and clamped using heavy guage saddles in an interval of 300 mm using NF screws and on the eaiter end of the pipe terminated properly-20 mm m 19.57 19.57 65.0 False None None False None False 1272.05 0 2887450 94492 None code132 Supplying PVC /GI flexible conduit pipe …. Mm dia fixing on surface cover inverted tapared wodden plugs or phill plugs or rawl plugs and clamped using heavy guage saddles in an interval of 300 mm using NF screws and on the eaiter end of the pipe terminated properly-20 mm 25 mm m 22.66 22.66 45.0 False None None False None False 1019.7 0 2887451 94492 None code133 Supply & Fixing of Metal fan box with round Hook Each 164.8 164.8 30.0 False None None False None False 4944.0 0 2887452 94492 None code134 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Short point upto 3 Mtd. From Tapping point to outlet via switch box. Point 277.07 277.07 20.0 False None None False None False 5541.4 0 2887453 94492 None code135 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Medium point above 3 Mts upto 6 Mts. From tapping point to outlet via switch box. Point 390.37 390.37 30.0 False None None False None False 11711.1 0 2887454 94492 None code136 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Long point above 6 Mts. Upto 10 Mts. From tapping of point to outlet via switch box. Point 571.65 571.65 20.0 False None None False None False 11433.0 0 2887455 94492 None code137 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-1.5 Sqmm m 26.78 26.78 103.0 False None None False None False 2758.34 0 2887456 94492 None code138 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-2.5Sqmm m 43.26 43.26 250.0 False None None False None False 10815.0 0 2887457 94492 None code139 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-4Sqmm m 64.89 64.89 220.0 False None None False None False 14275.8 0 2887458 94492 None code140 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-6 sqmm m 94.76 94.76 160.0 False None None False None False 15161.6 0 2887459 94492 None code141 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-10Sqmm m 172.01 172.01 95.0 False None None False None False 16340.95 0 2887460 94492 None code142 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-1-3 way Each 142.14 142.14 52.0 False None None False None False 7391.28 0 2887461 94492 None code143 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-4-5 way Each 163.77 163.77 27.0 False None None False None False 4421.79 0 2887462 94492 None code144 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-6 way Each 182.31 182.31 49.0 False None None False None False 8933.19 0 2887463 94492 None code145 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-8 way Each 226.6 226.6 44.0 False None None False None False 9970.4 0 2887464 94492 None code146 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-12 way Each 268.83 268.83 27.0 False None None False None False 7258.41 0 2887465 94492 None code147 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-1-3 way Each 141.11 141.11 35.0 False None None False None False 4938.85 0 2887466 94492 None code148 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-4-5 way Each 165.83 165.83 41.0 False None None False None False 6799.03 0 2887467 94492 None code149 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-6 way Each 180.25 180.25 65.0 False None None False None False 11716.25 0 2887468 94492 None code150 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-8 way Each 241.02 241.02 35.0 False None None False None False 8435.7 0 2887469 94492 None code151 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-12way Each 292.52 292.52 25.0 False None None False None False 7313.0 0 2887470 94492 None code152 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amp one way Each 105.06 105.06 135.0 False None None False None False 14183.1 0 2887471 94492 None code153 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amps 2 way Each 170.98 170.98 8.0 False None None False None False 1367.84 0 2887472 94492 None code154 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amps 3 way socket Each 176.13 176.13 102.0 False None None False None False 17965.26 0 2887473 94492 None code155 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -Stepped Fan Regulator Each 367.71 367.71 37.0 False None None False None False 13605.27 0 2887474 94492 None code156 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -16 Amps 1 way switch Each 185.4 185.4 35.0 False None None False None False 6489.0 0 2887475 94492 None code157 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6/16 Amps universal socket Each 243.08 243.08 37.0 False None None False None False 8993.96 0 2887476 94492 None code158 Supply and fixing of -Led Light Fixture 2 feet - 9/10 W Each 567.53 567.53 15.0 False None None False None False 8512.95 0 2887477 94492 None code159 Supply and fixing of -Led Light Fixture 4 feet - 20/22 W Each 710.7 710.7 25.0 False None None False None False 17767.5 0 2887478 94492 None code160 Supply and fixing of -7 Watt LED Bulb Each 153.47 153.47 15.0 False None None False None False 2302.05 0 2887479 94492 None code161 Supply and fixing of -Surface Light LED square or round down light 10 -12 W Each 911.55 911.55 10.0 False None None False None False 9115.5 0 2887480 94492 None code162 Supply and fixing of -Led Streetlight 25 Watt Each 2497.75 2497.75 2.0 False None None False None False 4995.5 0 2887481 94492 None code163 Fabrication and supply of sheet steel enclosure out of 14 SWG CRCA Sheet duly powder coated the contro panel (Size of 2000 x1500x 450) is of compartment alized, All the components are duly wired and connected to Aluminum bus bar.-Supplying and fixing of 100 A 4 x 30 x 10 mm Alumunium Strips m 3445.35 3445.35 1.0 False None None False None False 3445.35 0 2887482 94492 None code164 Fabrication and supply of sheet steel enclosure out of 14 SWG CRCA Sheet duly powder coated the contro panel (Size of 2000 x1500x 450) is of compartment alized, All the components are duly wired and connected to Aluminum bus bar.-16 sqmm wire m 327.54 327.54 5.0 False None None False None False 1637.7 0 2887483 94492 None code165 Supplying and fixing of LED Panel Board indicating Lamp with required colour Suitable for 220 V AC 50 HZ Each 530.45 530.45 3.0 False None None False None False 1591.35 0 2887484 94492 None code166 Supplying of Multifunction Digital Meter Each 9594.45 9594.45 1.0 False None None False None False 9594.45 0 2887485 94492 None code167 Supplying and fixing of TPN ACCL 40A Each 10815.0 10815.0 1.0 False None None False None False 10815.0 0 2887486 94492 None code168 Supplying and fixing of 40 - 63 Amps TPN MCB Each 3180.64 3180.64 2.0 False None None False None False 6361.28 0 2887487 94492 None code169 Supplying and fixing of 50 x 50 x 6 mm Angle m 406.85 406.85 1.0 False None None False None False 406.85 0 2887488 94492 None code170 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…..-25 x 3 mm G.I strip. m 75.0 75.0 20.0 False None None False None False 1500.0 0 2887489 94492 None code171 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…..-600x600x3 GI Plate Each 760.0 760.0 2.0 False None None False None False 1520.0 0 2887490 94492 None code172 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…..-25 x 3 mm m 505.0 505.0 8.0 False None None False None False 4040.0 0 2887491 94492 None code173 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…..-600x600x3 Cu. Plate Each 6900.0 6900.0 1.0 False None None False None False 6900.0 0 2887492 94492 None code174 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 12 SWG GI wire m 14.0 14.0 78.0 False None None False None False 1092.0 0 2887493 94492 None code175 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 12 SWG m 58.0 58.0 39.0 False None None False None False 2262.0 0 2887494 94492 None code176 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 10 SWG m 68.0 68.0 39.0 False None None False None False 2652.0 0 2887495 94492 None code177 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 2C x 10sq.mm. Al. Alum. Cable m 95.0 95.0 20.0 False None None False None False 1900.0 0 2887496 94492 None code178 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 4C x 10sq.mm. Al. Alum. Cable m 130.0 130.0 23.0 False None None False None False 2990.0 0 2887497 94492 None code179 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 4C x 16sq.mm. Al. Alum. Cable m 150.0 150.0 23.0 False None None False None False 3450.0 0 2887498 94492 None code180 Supplying and fixing of 48 " Sweep 5 Star (1200 mm ) Each 2757.31 2757.31 22.0 False None None False None False 60660.82 0 2887499 94492 None code181 Supplying and fixing of 12" Exhausr fan 1400 rpm light duty exhaust fan Each 1536.76 1536.76 9.0 False None None False None False 13830.84 0 2887500 94492 None code182 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. andfixing using invetred wood plugs in Case of RCC ceiling and RCC wall /stone structure or rawl plug incase of brick walls and cement plastering the damaged portion using heavy guage saddles in an intervel of 700 mm using NF Screws-25mm dia 2mm Thick m 81.37 81.37 156.0 False None None False None False 12693.72 0 2887501 94492 None code183 4 Pair Telephone wire m 36.05 36.05 78.0 False None None False None False 2811.9 0 2887502 94492 None code184 Supplying & drawing UTP Cat 6 E Lan Cable m 39.14 39.14 254.0 False None None False None False 9941.56 0 2887503 94492 None code185 Supply & drawing of RG6 wire TV cable m 45.32 45.32 78.0 False None None False None False 3534.96 0 2887504 94492 None code186 Supplying & Fixing of Single I/0 Each 504.7 504.7 9.0 False None None False None False 4542.3 0 2887505 94492 None code187 Supplying & Fixing of Double I/O Each 566.5 566.5 1.0 False None None False None False 566.5 0 2887506 94492 None code188 Supplying & Fixing of T.V telephone Socket Each 160.68 160.68 11.0 False None None False None False 1767.48 0 2887507 94492 None code189 Supplying & Fixing of 12U with 800 mm depth Each 9100.05 9100.05 1.0 False None None False None False 9100.05 0 2887508 94492 None code190 Supplying & Fixing of power Strip Each 1500.71 1500.71 1.0 False None None False None False 1500.71 0 2887509 94492 None code191 24 port 10 / 100 /1000 Switch Each 7637.45 7637.45 1.0 False None None False None False 7637.45 0 2887510 94492 None code192 Supplying & Fixing of 1 Mtr patch cable Each 230.72 230.72 10.0 False None None False None False 2307.2 0 2887511 94492 None code193 Supplying & Fixing of 2 Mtr patch cable Each 264.71 264.71 10.0 False None None False None False 2647.1 0 2887512 94492 None code194 Supplying & Fixing of 24 port 10 / 100 patch panel Each 8137.0 8137.0 1.0 False None None False None False 8137.0 0 2887513 94492 None code195 NON SR RATES-Providing supplying and fixing Hydraulic door closures with mounting heavy duty shuitable for flush door shutters including cost of materials,labour etc., complete as per specifications., Nos 1350.0 1350.0 2.0 False None None False None False 2700.0 0 2887514 94492 None code196 Supplying, installing, testing and commissioning approved make15 mm CP health faucet of approved make with necessary CP flexible hose 1.0m long nozzle, CP crutch,nozzle anguler stop cock with wall flange etc., complete.make: Jaguar,modle no. ALD-573 Nos 1307.0 1307.0 6.0 False None None False None False 7842.0 0 2887515 94492 None code197 Supplying, installing and testing Soap Dish including necessary fixing materials etc., complete. (Jal,Jaquar or equivalent) Nos 126.0 126.0 10.0 False None None False None False 1260.0 0 2887516 94492 None code198 Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour flor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incindental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge.per the instructions of the Engineer in charge. (All floors) m 31.0 31.0 650.0 False None None False None False 20150.0 0 2887517 94492 None code199 Providing and fixing sand cast iron soil waste single equal junction of required degree with access door 100x100x100mm, including cost of materials, labour, testing complete as per specifications. Nos 1044.96 1044.96 20.0 False None None False None False 20899.2 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709376177000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709376177000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709376177000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709376179000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1709376182000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1709376187000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, None 1709376190000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. None 1709376194000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. None 1709376197000 0 None None ELIGIBILITY KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever None 1709376201000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates None 1709376204000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. None 1709376208000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only. None 1709376211000 0 None None ELIGIBILITY GST shall be added separately in the estimate. None 1709376215000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1709376218000 0 None None ELIGIBILITY The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1709376221000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. None 1709376225000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time None 1709376231000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Scanned copy of latest GST clearance certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of latest GST clearance certificate. None None None None Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. None None None None As per Tender Documents KW-4 clause 3.3 key & critical equipments available. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. None None None None Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document None None None None Required valid electrical license for executing similar nature of work as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required valid electrical license for executing similar nature of work as per tender document None None None None The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document None None None None Income Tax returns & PAN Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Assessed Available Bid Capacity as per tender document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessed Available Bid Capacity as per tender document None None None None Covering letter. Others Covering letter. createdTs version createdDate modifiedDate documentName None None None None Others -- Covering letter.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Work done certificate True Technical Bid key and critical equipment LIST True Technical Bid Income Tax returns & PAN no. True Technical Bid Pre-qualification certificate issued by KHB True Technical Bid GST clearance certificate True Technical Bid Credit lines/ letter of credit/Bankers certificate True Technical Bid Assessed available tender capacity calculation True Technical Bid Electrical license True Technical Bid Work done certificate with quantities True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1709383064000 version 0 createdDate None modifiedDate None blockNumber CAUVERY BHAVAN 3RD FLOOR street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None