| 1709381650000 | 0 | None | None | Buildings | Construction of Toilet Building to Govt higher primary Girls School No 02 at Gokak Town in Gokak Taluka | 439706.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2890600 | 94637 | None | 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting
& stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 105.06 | 105.06 | 18.97 | False | None | None | False | None | False | 1992.9882 | 0 | | 2890601 | 94637 | None | 2.1.4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6403.51 | 6403.51 | 5.25 | False | None | None | False | None | False | 33618.4275 | 0 | | 2890602 | 94637 | None | 5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :5.1.1 Cement mortar 1:6 | Cum | 5779.33 | 5779.33 | 5.05 | False | None | None | False | None | False | 29185.6165 | 0 | | 2890603 | 94637 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6580.67 | 6580.67 | 2.26 | False | None | None | False | None | False | 14872.3142 | 0 | | 2890604 | 94637 | None | 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 273.98 | 273.98 | 9.66 | False | None | None | False | None | False | 2646.6468 | 0 | | 2890605 | 94637 | None | 2.5.2 | Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10469.79 | 10469.79 | 2.52 | False | None | None | False | None | False | 26383.8708 | 0 | | 2890606 | 94637 | None | 11.32 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to djacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Tonne | 92140.71 | 92140.71 | 0.19 | False | None | None | False | None | False | 17506.7349 | 0 | | 2890607 | 94637 | None | 6.5 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to djacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Cum | 11306.31 | 11306.31 | 12.12 | False | None | None | False | None | False | 137032.4772 | 0 | | 2890608 | 94637 | None | 12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Mtr | 318.0 | 318.0 | 50.4 | False | None | None | False | None | False | 16027.2 | 0 | | 2890609 | 94637 | None | 12.53 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges | Sqm | 1588.0 | 1588.0 | 11.34 | False | None | None | False | None | False | 18007.92 | 0 | | 2890610 | 94637 | None | 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal paintingtwo coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications | No | 1046.48 | 1046.48 | 6.0 | False | None | None | False | None | False | 6278.88 | 0 | | 2890611 | 94637 | None | 11.34a | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with pproved steel primer all complete. Fixed to steel windows by welding | Kgs | 173.04 | 173.04 | 24.3 | False | None | None | False | None | False | 4204.872 | 0 | | 2890612 | 94637 | None | 9.22.2 | Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with wate absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 600x600 mm | Sqm | 1179.35 | 1179.35 | 28.75 | False | None | None | False | None | False | 33906.3125 | 0 | | 2890613 | 94637 | None | 8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, roviding and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 262.65 | 262.65 | 78.46 | False | None | None | False | None | False | 20607.519 | 0 | | 2890614 | 94637 | None | 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 382.13 | 382.13 | 55.65 | False | None | None | False | None | False | 21265.5345 | 0 | | 2890615 | 94637 | None | 8.29 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly rooming the surface to remove all dirt, dust, mortar droand foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge | Sqm | 291.49 | 291.49 | 55.65 | False | None | None | False | None | False | 16221.4185 | 0 | | 2890616 | 94637 | None | 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge | Sqm | 141.11 | 141.11 | 78.46 | False | None | None | False | None | False | 11071.4906 | 0 | | 2890617 | 94637 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and
floors wherever required | Each | 5030.52 | 5030.52 | 1.0 | False | None | None | False | None | False | 5030.52 | 0 | | 2890618 | 94637 | None | 7.44 | Providing and fixing of prepigmented extruded orange cement roof tiles of size 420mmx330mm with necessary specials such as Ridges , barges nd nails etc including cost of providing PVC (6.00 kg/sq cm) gutters of min 6" radius and down water pipes of 4" dia as per roof design on EXISTING CONCRETE SLOPING ROOF SLAB. Including cost of mortar band, all materials labour as per specifications | Rmtr | 719.97 | 719.97 | 12.0 | False | None | None | False | None | False | 8639.64 | 0 | | 2890619 | 94637 | None | 13.34 | KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications | Ltr | 9.0 | 9.0 | 500.0 | False | None | None | False | None | False | 4500.0 | 0 | | 2890620 | 94637 | None | 14.7.1 | Providing and fxing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fttings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | No | 4587.62 | 4587.62 | 1.0 | False | None | None | False | None | False | 4587.62 | 0 | | 2890621 | 94637 | None | 16.2 | Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 20 mm dia GM (Copper alloy) Gate valves | No | 888.0 | 888.0 | 1.0 | False | None | None | False | None | False | 888.0 | 0 | | 2890622 | 94637 | None | 2.2 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for 110mm dia 6kg/sqcm | Rmtr | 288.0 | 288.0 | 5.0 | False | None | None | False | None | False | 1440.0 | 0 | | 2890623 | 94637 | None | 13.32.3 | Providing and fixing Chlorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this including the pipe with clamp at 1.0m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete .(internal work exposed on wall) 25mm nominal OD Pipe | Rmtr | 379.0 | 379.0 | 10.0 | False | None | None | False | None | False | 3790.0 | 0 |
|