| 2882262 | 94249 | None | 19.7.3 | 1. Dismantling Work : Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar | Cum | 1080.45 | 1080.45 | 162.94 | False | None | None | False | None | False | 176048.523 | 0 |
| 2882263 | 94249 | None | 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge | Cum | 2547.3 | 2547.3 | 64.55 | False | None | None | False | None | False | 164428.215 | 0 |
| 2882264 | 94249 | None | 19.9.2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge. In cement mortar | Cum | 1768.2 | 1768.2 | 24.88 | False | None | None | False | None | False | 43992.816 | 0 |
| 2882265 | 94249 | None | 19.2.2 | Demolishing lime concrete manually/ by mechanical means and disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | Cum | 1080.45 | 1080.45 | 12.1 | False | None | None | False | None | False | 13073.445 | 0 |
| 2882266 | 94249 | None | 19.12.1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin- charge. Of area 3 m² and below | Cum | 252.0 | 252.0 | 5.63 | False | None | None | False | None | False | 1418.76 | 0 |
| 2882267 | 94249 | None | 1.4.2 | 2.GROUND FLOOR CIVIL WORK Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m | Cum | 271.95 | 271.95 | 112.15 | False | None | None | False | None | False | 30499.1925 | 0 |
| 2882268 | 94249 | None | 1.23 | Providing and filling in foundation with granite/trap broken metal 100mm and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. specification. No.KBS | Cum | 2816.1 | 2816.1 | 7.29 | False | None | None | False | None | False | 20529.369 | 0 |
| 2882269 | 94249 | None | 4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. | Sqm | 123.9 | 123.9 | 366.37 | False | None | None | False | None | False | 45393.243 | 0 |
| 2882270 | 94249 | None | 2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 33.07 | False | None | None | False | None | False | 207959.0415 | 0 |
| 2882271 | 94249 | None | 2.2.1 | Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super plasticizers laid in finished
layers, well compacted using needle vibrators, including all lead & lifts, cost
of all materials, quality confirming to the requirements of relevant IS codes,
labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footing | Cum | 6601.35 | 6601.35 | 29.16 | False | None | None | False | None | False | 192495.366 | 0 |
| 2882272 | 94249 | None | 2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Centering Charges For Footing | Cum | 528.11 | 528.11 | 29.16 | False | None | None | False | None | False | 15399.6876 | 0 |
| 2882273 | 94249 | None | 2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Column (Upto Ground Level) | Cum | 6601.35 | 6601.35 | 1.47 | False | None | None | False | None | False | 9703.9845 | 0 |
| 2882274 | 94249 | None | 2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering Charges for Column (Upto Ground Level) | Cum | 4620.95 | 4620.95 | 1.47 | False | None | None | False | None | False | 6792.7965 | 0 |
| 2882275 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Column ( Above GL) | Cum | 7185.15 | 7185.15 | 5.59 | False | None | None | False | None | False | 40164.9885 | 0 |
| 2882276 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering Charges For Column ( Above GL) | Cum | 5029.6 | 5029.6 | 5.59 | False | None | None | False | None | False | 28115.464 | 0 |
| 2882277 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Plinth Beam, Cill, Slab, Staircase | Cum | 7185.15 | 7185.15 | 35.58 | False | None | None | False | None | False | 255647.637 | 0 |
| 2882278 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Plinth beam, Cill, Slab, Staircase | Cum | 3592.57 | 3592.57 | 35.58 | False | None | None | False | None | False | 127823.6406 | 0 |
| 2882279 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel, Roof Beam | Cum | 7185.15 | 7185.15 | 9.28 | False | None | None | False | None | False | 66678.192 | 0 |
| 2882280 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Lintel, Roof Beam | Cum | 4311.09 | 4311.09 | 9.28 | False | None | None | False | None | False | 40006.9152 | 0 |
| 2882281 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja | Cum | 7185.15 | 7185.15 | 2.35 | False | None | None | False | None | False | 16885.1025 | 0 |
| 2882282 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Chajja | Cum | 3233.31 | 3233.31 | 2.35 | False | None | None | False | None | False | 7598.2785 | 0 |
| 2882283 | 94249 | None | 2.11 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Tonne | 93929.85 | 93929.85 | 11.616 | False | None | None | False | None | False | 1091089.1376 | 0 |
| 2882284 | 94249 | None | 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 44.7 | False | None | None | False | None | False | 12484.71 | 0 |
| 2882285 | 94249 | None | 1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 86.08 | False | None | None | False | None | False | 42842.016 | 0 |
| 2882286 | 94249 | None | 6.19 | Providing Tile brick masonry with common burnt clay machine moulded tile bricks of class designation 5.0 conforming to IS : 2690 (Part I) in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 17006.85 | 17006.85 | 21.77 | False | None | None | False | None | False | 370239.1245 | 0 |
| 2882287 | 94249 | None | 6.13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Sqm | 1024.8 | 1024.8 | 9.27 | False | None | None | False | None | False | 9499.896 | 0 |
| 2882288 | 94249 | None | 8.3.2 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 349.65 | 349.65 | 222.68 | False | None | None | False | None | False | 77860.062 | 0 |
| 2882289 | 94249 | None | 8.4.1 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 339.15 | 339.15 | 184.01 | False | None | None | False | None | False | 62406.9915 | 0 |
| 2882290 | 94249 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge | Sqm | 105.0 | 105.0 | 372.48 | False | None | None | False | None | False | 39110.4 | 0 |
| 2882291 | 94249 | None | 8.17.2 | Providing Raised and cut pointing: Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge | Sqm | 294.0 | 294.0 | 136.49 | False | None | None | False | None | False | 40128.06 | 0 |
| 2882292 | 94249 | None | 9.2 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer in charges | Sqm | 840.0 | 840.0 | 36.31 | False | None | None | False | None | False | 30500.4 | 0 |
| 2882293 | 94249 | None | 9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent | Sqm | 2994.6 | 2994.6 | 196.88 | False | None | None | False | None | False | 589576.848 | 0 |
| 2882294 | 94249 | None | 10.2 | Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge | m | 344.4 | 344.4 | 58.14 | False | None | None | False | None | False | 20023.416 | 0 |
| 2882295 | 94249 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 176.4 | 176.4 | 310.02 | False | None | None | False | None | False | 54687.528 | 0 |
| 2882296 | 94249 | None | 12.10 | Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications | Cum | 247431.45 | 247431.45 | 0.304 | False | None | None | False | None | False | 75219.1608 | 0 |
| 2882297 | 94249 | None | 12.14 | Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications | Sqm | 9800.7 | 9800.7 | 5.265 | False | None | None | False | None | False | 51600.6855 | 0 |
| 2882298 | 94249 | None | 8.82 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | Sqm | 710.85 | 710.85 | 14.18 | False | None | None | False | None | False | 10079.853 | 0 |
| 2882299 | 94249 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Upto 3.50 m | Sqm | 165.9 | 165.9 | 556.48 | False | None | None | False | None | False | 92320.032 | 0 |
| 2882300 | 94249 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Upto 3.50 m Out Side | Sqm | 165.9 | 165.9 | 222.68 | False | None | None | False | None | False | 36942.612 | 0 |
| 2882301 | 94249 | None | 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 120.75 | 120.75 | 23.97 | False | None | None | False | None | False | 2894.3775 | 0 |
| 2882302 | 94249 | None | 12.90 | Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm Windows shall be provided with 6mm plain float glass standard hardware and Multi point locking system with touch lock Wall thickness of frame and sash shall be of 2mm and 2.5mm Maximum possible size 2419mm x 2200mm (The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made) | Sqm | 7070.7 | 7070.7 | 14.76 | False | None | None | False | None | False | 104363.532 | 0 |
| 2882303 | 94249 | None | 11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, | Kg | 593.25 | 593.25 | 317.4 | False | None | None | False | None | False | 188297.55 | 0 |
| 2882304 | 94249 | None | 2.5.2 | 3.FIRST FLOOR CIVIL WORK Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Colomns | Cum | 7185.15 | 7185.15 | 4.78 | False | None | None | False | None | False | 34345.017 | 0 |
| 2882305 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Colomns | Cum | 5029.6 | 5029.6 | 4.78 | False | None | None | False | None | False | 24041.488 | 0 |
| 2882306 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cill | Cum | 7185.15 | 7185.15 | 0.52 | False | None | None | False | None | False | 3736.278 | 0 |
| 2882307 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Cill | Cum | 3592.57 | 3592.57 | 0.52 | False | None | None | False | None | False | 1868.1364 | 0 |
| 2882308 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel, Beam | Cum | 7185.15 | 7185.15 | 7.37 | False | None | None | False | None | False | 52954.5555 | 0 |
| 2882309 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Lintel, Beam | Cum | 4311.09 | 4311.09 | 7.37 | False | None | None | False | None | False | 31772.7333 | 0 |
| 2882310 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja | Cum | 7185.15 | 7185.15 | 4.95 | False | None | None | False | None | False | 35566.4925 | 0 |
| 2882311 | 94249 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Centering For Chejja | Cum | 3233.31 | 3233.31 | 4.95 | False | None | None | False | None | False | 16004.8845 | 0 |
| 2882312 | 94249 | None | 2.11 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) For First Floor | Tonne | 93929.85 | 93929.85 | 3.091 | False | None | None | False | None | False | 290337.16635 | 0 |
| 2882313 | 94249 | None | 6.19 | Providing Tile brick masonry with common burnt clay machine moulded tile bricks of class designation 5.0 conforming to IS : 2690 (Part I) in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 17006.85 | 17006.85 | 20.24 | False | None | None | False | None | False | 344218.644 | 0 |
| 2882314 | 94249 | None | 6.13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Sqm | 1024.8 | 1024.8 | 16.92 | False | None | None | False | None | False | 17339.616 | 0 |
| 2882315 | 94249 | None | 8.3.2 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Out Side | Sqm | 349.65 | 349.65 | 215.89 | False | None | None | False | None | False | 75485.9385 | 0 |
| 2882316 | 94249 | None | 8.4.1 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 339.15 | 339.15 | 132.81 | False | None | None | False | None | False | 45042.5115 | 0 |
| 2882317 | 94249 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 105.0 | 105.0 | 132.81 | False | None | None | False | None | False | 13945.05 | 0 |
| 2882318 | 94249 | None | 8.17.2 | Providing Raised and cut pointing: Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge | Sqm | 294.0 | 294.0 | 138.21 | False | None | None | False | None | False | 40633.74 | 0 |
| 2882319 | 94249 | None | 9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. | Sqm | 2994.6 | 2994.6 | 152.68 | False | None | None | False | None | False | 457215.528 | 0 |
| 2882320 | 94249 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 176.4 | 176.4 | 340.2 | False | None | None | False | None | False | 60011.28 | 0 |
| 2882321 | 94249 | None | 12.10 | Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 247431.45 | 247431.45 | 0.152 | False | None | None | False | None | False | 37609.5804 | 0 |
| 2882322 | 94249 | None | 12.14 | Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications | Sqm | 9800.7 | 9800.7 | 2.63 | False | None | None | False | None | False | 25775.841 | 0 |
| 2882323 | 94249 | None | 8.82 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | Sqm | 710.85 | 710.85 | 7.09 | False | None | None | False | None | False | 5039.9265 | 0 |
| 2882324 | 94249 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Upto 3.50 m Inside | Sqm | 165.9 | 165.9 | 265.62 | False | None | None | False | None | False | 44066.358 | 0 |
| 2882325 | 94249 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Upto 3.50 m Outside | Sqm | 165.9 | 165.9 | 215.89 | False | None | None | False | None | False | 35816.151 | 0 |
| 2882326 | 94249 | None | 11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 142.8 | 142.8 | 5817.52 | False | None | None | False | None | False | 830741.856 | 0 |
| 2882327 | 94249 | None | 7.43 | Providing and fixing of prepigmented extruded orange cement roof tiles of size 420mmx330mm with necessary specials such as Ridges , barges and nails etc including cost of providing PVC (6.00 kg/cm2) gutters of min 6" radius and down water pipes of 4" dia as per the roof design on EXISTING MS/WOODEN ROOF or TRUSS. Including cost of materials, scaffoldings, labour etc., compelte as per specifications | Sqm | 767.55 | 767.55 | 266.23 | False | None | None | False | None | False | 204344.8365 | 0 |
| 2882328 | 94249 | None | 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 120.75 | 120.75 | 241.19 | False | None | None | False | None | False | 29123.6925 | 0 |
| 2882329 | 94249 | None | 12.90 | Providing and fixing of 3 track X 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame The outer frame having an overall size of 108mm width X 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 75mm with GI reinforcement of 2mm and mesh sash of size 37mm X 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm X 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm to 2.5mm Maximum possible size 2419mm X 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made) | Sqm | 7070.7 | 7070.7 | 16.2 | False | None | None | False | None | False | 114545.34 | 0 |
| 2882330 | 94249 | None | 7.32.4 | Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 | Sqm | 1387.05 | 1387.05 | 147.68 | False | None | None | False | None | False | 204839.544 | 0 |
| 2882331 | 94249 | None | 11.3.1 | Electrification Works Supplying of .feet PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning
hours and 70 percent lumen maintenance with CRI Greater than 80. Power
Input 220-240Vat 50 or 60Hz and Power factor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 X 2' to 9 or10 W | Each | 551.0 | 551.0 | 9.0 | False | None | None | False | None | False | 4959.0 | 0 |
| 2882332 | 94249 | None | 11.3.2 | Supplying of .feet PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning
hours and 70 percent lumen maintenance with CRI Greater than 80. Power
Input 220-240Vat 50 or 60Hz and Power factor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 X 4' to 20 or 22 W | Each | 690.0 | 690.0 | 4.0 | False | None | None | False | None | False | 2760.0 | 0 |
| 2882333 | 94249 | None | 11.5.1 | Supply of round or square recess or surface mounted rolling
type LED Down light with . W GU 10 LED Lamp Rib
Fabricated from diecast aluminium with white powder
coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70 percent lumen maintenance with CRI Greater than 80. Power Input 220 to 240V at 50 or 60Hz and Power factor Greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 5 to 6W | Each | 571.0 | 571.0 | 4.0 | False | None | None | False | None | False | 2284.0 | 0 |
| 2882334 | 94249 | None | 11.5.2 | Supply of round or square recess or surface mounted rolling
type LED Down light with . W GU 10 LED Lamp Rib
Fabricated from diecast aluminium with white powder
coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70 percent lumen maintenance with CRI Greater than 80. Power Input 220 to 240V at 50 or 60Hz and Power factor Greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 10 to 12W | Each | 885.0 | 885.0 | 4.0 | False | None | None | False | None | False | 3540.0 | 0 |
| 2882335 | 94249 | None | 11.11.1 | Supplying and fixing of retrofit type to LED bulb . W with
OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI Greater Than 70 Percent. efficacy Greater Than 80 lumen per W, lifeGreater Than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Greater Than 0.95, power loss should Less Than 5Percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20Percent, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 3W 6500K | Each | 124.0 | 124.0 | 8.0 | False | None | None | False | None | False | 992.0 | 0 |
| 2882336 | 94249 | None | 6.5.1 | Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply. 300 mm Sweep | Each | 2492.0 | 2492.0 | 6.0 | False | None | None | False | None | False | 14952.0 | 0 |
| 2882337 | 94249 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model | Each | 2984.0 | 2984.0 | 6.0 | False | None | None | False | None | False | 17904.0 | 0 |
| 2882338 | 94249 | None | 6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size
with bracket blades complete for light duty suitable to operate
on 230V 50Hz, AC Supply | Each | 1492.0 | 1492.0 | 2.0 | False | None | None | False | None | False | 2984.0 | 0 |
| 2882339 | 94249 | None | 13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders | Each | 122.0 | 122.0 | 30.0 | False | None | None | False | None | False | 3660.0 | 0 |
| 2882340 | 94249 | None | 13.11 | Fixing a ceiling /wall mounting fan of all capacities and all
types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with
necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 315.0 | 315.0 | 12.0 | False | None | None | False | None | False | 3780.0 | 0 |
| 2882341 | 94249 | None | 13.13 | Fixing one exhaust fan after making a suitable notch in the
wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. | Each | 707.0 | 707.0 | 2.0 | False | None | None | False | None | False | 1414.0 | 0 |
| 2882342 | 94249 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe . mm
dia.mm thick confirming to IS 2509 with suitable size
bends, metal/PVC Junction boxes, adhesive paste etc., and
running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 25 mm dia 2 mm thick | Mtr | 78.0 | 78.0 | 250.0 | False | None | None | False | None | False | 19500.0 | 0 |
| 2882343 | 94249 | None | 1.1.1 | Supplying heavy gauge PVC conduit pipe . dia . mm
thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick | Mtr | 69.0 | 69.0 | 400.0 | False | None | None | False | None | False | 27600.0 | 0 |
| 2882344 | 94249 | None | 1.9.1 | Supplying PVC/GI flexible conduit pipe . mm dia fixing on
surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an
interval of 300 mm using NF screws and on either end of the pipe terminated completely. 20mm | Mtr | 19.0 | 19.0 | 100.0 | False | None | None | False | None | False | 1900.0 | 0 |
| 2882345 | 94249 | None | 5.35 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. | Each | 5705.0 | 5705.0 | 1.0 | False | None | None | False | None | False | 5705.0 | 0 |
| 2882346 | 94249 | None | 5.40.1 | Supplying . A rated 3phase with neutral bus bar using
required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on
phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100 A 4 x 30 x 6 mm Aluminium Strips | Mtr | 2465.0 | 2465.0 | 2.0 | False | None | None | False | None | False | 4930.0 | 0 |
| 2882347 | 94249 | None | 5.34 | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden
Current Transformer Class 0.5 accuracy with Tape Wound. | Each | 562.0 | 562.0 | 2.0 | False | None | None | False | None | False | 1124.0 | 0 |
| 2882348 | 94249 | None | 5.41.1 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm | Mtr | 305.0 | 305.0 | 8.0 | False | None | None | False | None | False | 2440.0 | 0 |
| 2882349 | 94249 | None | 5.44.3 | Supply and Installation / Fixing / Provision of Outdoor type
Thermoplastic Modular Panel enclosure with transparent
Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust
proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix SinglePhase / Three Phase Energy Meter in suitable base plate andhaving a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 600 mm x 170 mm | Each | 6867.0 | 6867.0 | 1.0 | False | None | None | False | None | False | 6867.0 | 0 |
| 2882350 | 94249 | None | 12.56 | Supplying, fixing, wiring, earth electrode for grounding
conduits, I.C. cutouts and other equipment's on the meter
board using 40mm dia 2.90mm thick GI pipe 2.5 mtr
long buried in a pit … The pit should be filled with equal
proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | No | 3510.0 | 3510.0 | 2.0 | False | None | None | False | None | False | 7020.0 | 0 |
| 2882351 | 94249 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2 | Mtr | 26.0 | 26.0 | 500.0 | False | None | None | False | None | False | 13000.0 | 0 |
| 2882352 | 94249 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 2.5 mm2 | Mtr | 42.0 | 42.0 | 300.0 | False | None | None | False | None | False | 12600.0 | 0 |
| 2882353 | 94249 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4.0 mm2 | Mtr | 63.0 | 63.0 | 300.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 2882354 | 94249 | None | 9.2.5 | Supplying, erecting, testing & commissioning of OFF- LINE
UPS system suitable for operation on 230V, 50Hz, A/C
supply, with all accessories complete and Excluding batteries and wiring complete. 5 KVA off line UPS one hour backup : 6 x 80 AH batteries. | Each | 39898.0 | 39898.0 | 1.0 | False | None | None | False | None | False | 39898.0 | 0 |
| 2882355 | 94249 | None | 9.5.6 | SSupplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 75/80 AH capacity | Each | 10172.0 | 10172.0 | 6.0 | False | None | None | False | None | False | 61032.0 | 0 |
| 2882356 | 94249 | None | 2.6.3 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694:2010. 3C x 4 mm2 | Mtr | 245.0 | 245.0 | 30.0 | False | None | None | False | None | False | 7350.0 | 0 |
| 2882357 | 94249 | None | 1.5.1 | Supplying and fixing PVC/metal conduit Deep junction
box. 19/20mm deep junction box | Each | 49.0 | 49.0 | 60.0 | False | None | None | False | None | False | 2940.0 | 0 |
| 2882358 | 94249 | None | 5.7.3 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and
washers. 63 A | Each | 401.0 | 401.0 | 2.0 | False | None | None | False | None | False | 802.0 | 0 |
| 2882359 | 94249 | None | 5.42.1 | Fabricating supplying and mounting MS box made out
.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG | Sq CM | 0.5 | 0.5 | 15000.0 | False | None | None | False | None | False | 7500.0 | 0 |
| 2882360 | 94249 | None | 6.4.5 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 6.4.5 3.5 core 25 sqmm | Mtr | 180.0 | 180.0 | 50.0 | False | None | None | False | None | False | 9000.0 | 0 |
| 2882361 | 94249 | None | 5.20.1 | Supplying, fixing and wiring Earth Leakage Miniature Circuit
Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 16-25 A 2 pole | Each | 2536.0 | 2536.0 | 2.0 | False | None | None | False | None | False | 5072.0 | 0 |
| 2882362 | 94249 | None | 5.14.7 | SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overtheexistingwood/panelboardusingnecessaryscrews,bolts,nuts,necessaryphaseseparators,handleandwiringcomplete.ProtectionofOverloadandShortcircuitwithadjustablethermalmagneticrelease,MicroprocessorreleaseshallhaveEarthFaultasperIS/IEC60947-2.(Icu=100%lcs).In4PMCCB,allPolesshouldhaveprotectionforShort-Cicrcuit/OverLoad.ForMicroprocessorMCCBSFacilityforsegregatingPriorityandNon-PriorityloadsmustbeavailableintheMCCB.MCCBshallbeprovidedwithdoubleinsulation(insulationbetweenfrontcoverandinternalpowercircuitstoavoidanyaccidentalcontactwithlivecurrentcarryingpathwiththefrontcoveropen).Multi-polebreakersshallbedesignedtobreakallthepolessimultaneously and they shall have a single mechanism. 100 A 25 kA | Each | 8487.0 | 8487.0 | 1.0 | False | None | None | False | None | False | 8487.0 | 0 |
| 2882363 | 94249 | None | 5.18.4 | Supplying & fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP | Each | 739.0 | 739.0 | 5.0 | False | None | None | False | None | False | 3695.0 | 0 |
| 2882364 | 94249 | None | 5.18.7 | Supplying & fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN | Each | 1717.0 | 1717.0 | 4.0 | False | None | None | False | None | False | 6868.0 | 0 |
| 2882365 | 94249 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP | Each | 415.0 | 415.0 | 4.0 | False | None | None | False | None | False | 1660.0 | 0 |
| 2882366 | 94249 | None | 5.14.3 | Supply and fixing of 4pole power contactor with NO/NC
contacts on existing wood/panel board using necessary
bolts, nuts, washers and wiring etc., complete with AC-3
Rating and as per IS-13947. 40A | Each | 6119.0 | 6119.0 | 2.0 | False | None | None | False | None | False | 12238.0 | 0 |
| 2882367 | 94249 | None | 2.5.2 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010. 3C X 1.5 mm2 | Mtr | 72.0 | 72.0 | 50.0 | False | None | None | False | None | False | 3600.0 | 0 |
| 2882368 | 94249 | None | 6.5.2 | Labour charges for laying of 1.1 KV class UG cable in
existing trench GI pipe / stoneware pipe / on wall / on pole
as required 6.5.2 25 sqmm to 75 sqmm | Mtr | 15.5 | 15.5 | 50.0 | False | None | None | False | None | False | 775.0 | 0 |
| 2882369 | 94249 | None | 6.6.1 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the
trench to the required ground level and consolidating etc.,
complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary) | Mtr | 76.0 | 76.0 | 30.0 | False | None | None | False | None | False | 2280.0 | 0 |
| 2882370 | 94249 | None | 6.10.3 | Supplying and fixing L.T. cast Iron pot heads suitable for 1.1
KV class UG cable filled with necessary bitumen/insulating
compound complete with terminals, clamps, bolts, nuts and
washers etc. 25sq.mm | Each | 350.0 | 350.0 | 1.0 | False | None | None | False | None | False | 350.0 | 0 |
| 2882371 | 94249 | None | 5.18.3 | Supplying and fixing regular MCB distribution boards on
wall/ood board / flush mounting using required clA, bolts,
nuts etc., with provision for fixing suitable type capacity
MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 8 Way SP & N | Each | 1302.0 | 1302.0 | 12.0 | False | None | None | False | None | False | 15624.0 | 0 |
| 2882372 | 94249 | None | 5.9.2 | Supplying and fixing HRC fuse units base on existing switch /panel board. 32 to 63 A | Each | 612.0 | 612.0 | 2.0 | False | None | None | False | None | False | 1224.0 | 0 |
| 2882373 | 94249 | None | 5.7.3 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and
washers. 63A
| Each | 401.0 | 401.0 | 2.0 | False | None | None | False | None | False | 802.0 | 0 |
| 2882374 | 94249 | None | 5.10.1 | Supplying and fixing HRC fuse link on existing switch fuse
base with W loss as per IS-13703. upto 63 A | Each | 291.0 | 291.0 | 2.0 | False | None | None | False | None | False | 582.0 | 0 |
| 2882375 | 94249 | None | 3.3.1 | Supplying and fixing surface or flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick or CC wall including necessary rawl plugs Machine or NF screws etc complete 1to way2 | Each | 103.0 | 103.0 | 12.0 | False | None | None | False | None | False | 1236.0 | 0 |
| 2882376 | 94249 | None | 3.3.3 | Supplying and fixing surface or flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick or C.C wall, including necessary rawl plugs, Machine or NF screws etc., complete. 4-5 way | Each | 137.0 | 137.0 | 16.0 | False | None | None | False | None | False | 2192.0 | 0 |
| 2882377 | 94249 | None | 3.3.4 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 way | Each | 173.0 | 173.0 | 12.0 | False | None | None | False | None | False | 2076.0 | 0 |
| 2882378 | 94249 | None | 3.3.5 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 way | Each | 219.0 | 219.0 | 10.0 | False | None | None | False | None | False | 2190.0 | 0 |
| 2882379 | 94249 | None | 3.3.6 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10 to 12 way | Each | 261.0 | 261.0 | 10.0 | False | None | None | False | None | False | 2610.0 | 0 |
| 2882380 | 94249 | None | 3.4.2 | Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-3 way | Each | 159.0 | 159.0 | 12.0 | False | None | None | False | None | False | 1908.0 | 0 |
| 2882381 | 94249 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 way | Each | 177.0 | 177.0 | 16.0 | False | None | None | False | None | False | 2832.0 | 0 |
| 2882382 | 94249 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 way | Each | 220.0 | 220.0 | 12.0 | False | None | None | False | None | False | 2640.0 | 0 |
| 2882383 | 94249 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 way | Each | 261.0 | 261.0 | 10.0 | False | None | None | False | None | False | 2610.0 | 0 |
| 2882384 | 94249 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12 way | Each | 319.0 | 319.0 | 10.0 | False | None | None | False | None | False | 3190.0 | 0 |
| 2882385 | 94249 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-3 Module | Each | 161.0 | 161.0 | 12.0 | False | None | None | False | None | False | 1932.0 | 0 |
| 2882386 | 94249 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module | Each | 175.0 | 175.0 | 12.0 | False | None | None | False | None | False | 2100.0 | 0 |
| 2882387 | 94249 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module | Each | 234.0 | 234.0 | 10.0 | False | None | None | False | None | False | 2340.0 | 0 |
| 2882388 | 94249 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module | Each | 284.0 | 284.0 | 10.0 | False | None | None | False | None | False | 2840.0 | 0 |
| 2882389 | 94249 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module | Each | 344.0 | 344.0 | 10.0 | False | None | None | False | None | False | 3440.0 | 0 |
| 2882390 | 94249 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module | Each | 357.0 | 357.0 | 14.0 | False | None | None | False | None | False | 4998.0 | 0 |
| 2882391 | 94249 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket | Each | 236.0 | 236.0 | 20.0 | False | None | None | False | None | False | 4720.0 | 0 |
| 2882392 | 94249 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket | Each | 156.0 | 156.0 | 3.0 | False | None | None | False | None | False | 468.0 | 0 |
| 2882393 | 94249 | None | 3.6.12 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 | Each | 337.0 | 337.0 | 3.0 | False | None | None | False | None | False | 1011.0 | 0 |
| 2882394 | 94249 | None | 8.1 | Supplying and drawing UTP-CAT 6E LAN cable. | Mtr | 38.0 | 38.0 | 20.0 | False | None | None | False | None | False | 760.0 | 0 |
| 2882395 | 94249 | None | 8.2.1 | Supplying and drawing PVC flexible one pair telephone
unarmoured tinned copper cable-1 pair | Rmtr | 15.0 | 15.0 | 20.0 | False | None | None | False | None | False | 300.0 | 0 |
| 2882396 | 94249 | None | 8.10.1 | Supplying & fixing of I/O socket with back box Single I/O | Each | 490.0 | 490.0 | 3.0 | False | None | None | False | None | False | 1470.0 | 0 |
| 2882397 | 94249 | None | 8.12.3 | Supplying & Fixing of Patch panel for LAN cabling 16 Port 10/100 patch panel | Each | 3050.0 | 3050.0 | 1.0 | False | None | None | False | None | False | 3050.0 | 0 |
| 2882398 | 94249 | None | 6.17.1 | Supplying tinned copper lugs and crimping and wiring to
terminal point for wire of the following sizes 6.17.1 1.5 sqmm | Each | 3.0 | 3.0 | 30.0 | False | None | None | False | None | False | 90.0 | 0 |
| 2882399 | 94249 | None | 6.17.2 | Supplying tinned copper lugs and crimping and wiring to
terminal point for wire of the following sizes 6.17.2- 2.5 sqmm | Each | 4.0 | 4.0 | 30.0 | False | None | None | False | None | False | 120.0 | 0 |
| 2882400 | 94249 | None | 6.17.3 | Supplying tinned copper lugs and crimping and wiring to
terminal point for wire of the following sizes 6.17.2- 4 sqmm | Each | 7.0 | 7.0 | 30.0 | False | None | None | False | None | False | 210.0 | 0 |
| 2882401 | 94249 | None | 6.17.7 | Supplying tinned copper lugs and crimping and wiring to
terminal point for wire of the following sizes 6.17.2- 25 sqmm long barrel | Each | 20.0 | 20.0 | 30.0 | False | None | None | False | None | False | 600.0 | 0 |
| 2882402 | 94249 | None | 6.11.2 | Supplying and fixing of heavy duty cable glands suitable for
UG cable of 1.1 KV class (metal only) 25mm | Each | 84.0 | 84.0 | 30.0 | False | None | None | False | None | False | 2520.0 | 0 |
| 2882403 | 94249 | None | 6.8.4 | Supplying of . TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 1 Ton Capacity | Each | 47557.0 | 47557.0 | 3.0 | False | None | None | False | None | False | 142671.0 | 0 |
| 2882404 | 94249 | None | 6.12 | Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. | Each | 3175.0 | 3175.0 | 3.0 | False | None | None | False | None | False | 9525.0 | 0 |
| 2882405 | 94249 | None | 6.13.1 | Supplying and installation of insulated refrigerant copper
tubing of 5/8" and 3/8" with polythene foam insulation 3
core 80 stand copper wiring between indoor and outdoor
unit Leak testing oil and gas charging for additional piping
length of tube. Split | Mtr | 1549.0 | 1549.0 | 30.0 | False | None | None | False | None | False | 46470.0 | 0 |
| 2882406 | 94249 | None | 6.14.1 | Supplying installation testing and commissioning of heavy
duty compressor suitable for window/split type A/C. Split AC 1 Ton | Each | 14331.0 | 14331.0 | 3.0 | False | None | None | False | None | False | 42993.0 | 0 |
| 2882407 | 94249 | None | 6.15.1 | Supply and fixing of condensing coil for Split Air Conditioners. Split AC 1 ton | Each | 8960.0 | 8960.0 | 3.0 | False | None | None | False | None | False | 26880.0 | 0 |