| 2884205 | 94343 | None | 001 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.41/Vol-2/8.3.1) Upto 3.50m | Sqm | 313.95 | 313.95 | 549.31 | False | None | None | False | None | False | 172455.8745 | 0 |
| 2884206 | 94343 | None | 002 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.41/Vol-2/8.3.1) Above 3.50m | Sqm | 317.09 | 317.09 | 588.7 | False | None | None | False | None | False | 186670.883 | 0 |
| 2884207 | 94343 | None | 003 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.41/Vol-2/8.2.1) Upto 3.50m | Sqm | 260.4 | 260.4 | 1267.81 | False | None | None | False | None | False | 330137.724 | 0 |
| 2884208 | 94343 | None | 004 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.41/Vol-2/8.2.1) above 3.50m | Sqm | 263.0 | 263.0 | 313.2 | False | None | None | False | None | False | 82371.6 | 0 |
| 2884209 | 94343 | None | 005 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. for Ceiling. (CM SR 2021-22/P.No.41/Vol-2/8.4.1) | Sqm | 287.7 | 287.7 | 305.75 | False | None | None | False | None | False | 87964.275 | 0 |
| 2884210 | 94343 | None | 006 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing
and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (CM SR 2021-22/P.No.138/Vol-3/20.29) | Cum | 6837.6 | 6837.6 | 48.03 | False | None | None | False | None | False | 328409.928 | 0 |
| 2884211 | 94343 | None | 007 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size)
by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge.s (CM SR 2021-22/P.No.59/Vol-2/9.2) | Sqm | 740.25 | 740.25 | 124.77 | False | None | None | False | None | False | 92360.9925 | 0 |
| 2884212 | 94343 | None | 009 | Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. (CM SR 2021-22/P.No.146/Vol-3/MoRTH 602.6.3/21B-4) | Mtr | 73.5 | 73.5 | 172.89 | False | None | None | False | None | False | 12707.415 | 0 |
| 2884213 | 94343 | None | 010 | Providing and laying of Modular wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm thick foam underlay etc., (PWD SR 2018-19 /P.No. 113/14.71) | Sqm | 4280.85 | 4280.85 | 355.52 | False | None | None | False | None | False | 1521927.792 | 0 |
| 2884214 | 94343 | None | 011 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. (CM SR 2021-22/P.No.63/Vol-2/9.24 | Sqm | 3013.5 | 3013.5 | 138.8 | False | None | None | False | None | False | 418273.8 | 0 |
| 2884215 | 94343 | None | 012 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (CM SR 2021-22/P.No.65/Vol-2/9.38) For Bathroom | Sqm | 1022.7 | 1022.7 | 71.55 | False | None | None | False | None | False | 73174.185 | 0 |
| 2884216 | 94343 | None | 013 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (CM SR 2021-22/P.No.60/Vol-2/9.11) For Bathroom | Cum | 800.1 | 800.1 | 58.28 | False | None | None | False | None | False | 46629.828 | 0 |
| 2884217 | 94343 | None | 014 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (CM SR 2021-22/P.No.93/Vol-2/11.52) | Sqm | 4040.4 | 4040.4 | 12.96 | False | None | None | False | None | False | 52363.584 | 0 |
| 2884218 | 94343 | None | 015 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (CM SR 2021-22/P.No.100/Vol-2/12.12) | Cum | 79111.2 | 79111.2 | 0.43 | False | None | None | False | None | False | 34017.816 | 0 |
| 2884219 | 94343 | None | 0016 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges completeas per specifications. (excluding cost of fixtures) (CM SR 2021-22/P.No.101/Vol-2/12.21 | Sqm | 4053.0 | 4053.0 | 21.77 | False | None | None | False | None | False | 88233.81 | 0 |
| 2884220 | 94343 | None | 017 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (CM SR 2021-22/P.No.105/Vol-2/12.54) | Sqm | 498.75 | 498.75 | 29.7 | False | None | None | False | None | False | 14812.875 | 0 |
| 2884221 | 94343 | None | 018 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together
with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with both side prelam (CM SR 2021-22/P.No.106/Vol-2/12.55.1) | Sqm | 3993.15 | 3993.15 | 8.0 | False | None | None | False | None | False | 31945.2 | 0 |
| 2884222 | 94343 | None | 019 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (CM SR 2021-22/P.No.85/Vol-2/11.34A) | Kg | 152.25 | 152.25 | 740.88 | False | None | None | False | None | False | 112798.98 | 0 |
| 2884223 | 94343 | None | 020 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (CM SR 2021-22/P.No.76/Vol-2/11.6.1) | Sqm | 2635.5 | 2635.5 | 18.72 | False | None | None | False | None | False | 49336.56 | 0 |
| 2884224 | 94343 | None | 021 | Providing and fixing self-supported, ribbed,high quality, high grade (D:350 MPA Yst Min ), pre- painted Galvalume steel roof sheet, coated with bare Galvalume coating AZ 150, @ 150 gms/Smtr 55%AL,45%Zn) by hot dip process , of total coated thickness as specified for different spans with (Data Rate) | Sqm | 3740.1 | 3740.1 | 445.44 | False | None | None | False | None | False | 1665990.144 | 0 |
| 2884225 | 94343 | None | 022 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on wall .25 ltr/10 over and including including one coat of Special primer applied @ 0.75 ltr /10 m2 with paint of approved quality to give
an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Upto 3.50 m (CM SR 2021-22/P.No.46/Vol-2/8.33.1) | Sqm | 123.9 | 123.9 | 1537.6 | False | None | None | False | None | False | 190508.64 | 0 |
| 2884226 | 94343 | None | 023 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m2 over and including one coat of Special primer applied @ 0.75 ltr /10 m2 with paint of approved quality to give
an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Above 3.50 m (CM SR 2021-22/P.No.46/Vol-2/8.33.1) | Sqm | 125.14 | 125.14 | 313.2 | False | None | None | False | None | False | 39193.848 | 0 |
| 2884227 | 94343 | None | 024 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m2 over and including one coat of Special primer applied @ 0.75 ltr /10 m2 with paint of approved quality to give
an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Upto 3.50 m (CM SR 2021-22/P.No.46/Vol-2/8.33.1) | Sqm | 123.9 | 123.9 | 549.31 | False | None | None | False | None | False | 68059.509 | 0 |
| 2884228 | 94343 | None | 025 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m2 over and including one coat of Special primer applied @ 0.75 ltr /10 m2 with paint of approved quality to give
an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.46/Vol-2/8.33.1) Above 3.50 m | Sqm | 125.14 | 125.14 | 588.7 | False | None | None | False | None | False | 73669.918 | 0 |
| 2884229 | 94343 | None | 026 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.48/Vol-2/8.40) | Sqm | 94.5 | 94.5 | 52.92 | False | None | None | False | None | False | 5000.94 | 0 |
| 2884230 | 94343 | None | 027 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.47/Vol-2/8.34.1 | Sqm | 43.05 | 43.05 | 53.34 | False | None | None | False | None | False | 2296.287 | 0 |
| 2884231 | 94343 | None | 028 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m2 over an under coat of primer applied @0.75 ltr/10 m2 of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2021-22/P.No.46/Vol-2/8.33.2) | Sqm | 110.25 | 110.25 | 53.34 | False | None | None | False | None | False | 5880.735 | 0 |
| 2884232 | 94343 | None | 029 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm | Sqm | 7602.0 | 7602.0 | 60.03 | False | None | None | False | None | False | 456348.06 | 0 |
| 2884233 | 94343 | None | 001 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. ( CM SR 2021-22 P.No. 10/Vol-1/ 1.17.1 ) All kinds of soils. Depth upto 1.50 m | Cum | 203.7 | 203.7 | 66.15 | False | None | None | False | None | False | 13474.755 | 0 |
| 2884234 | 94343 | None | 002 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : ( CM SR 2021-22 P.No. 121/Vol-5/ 1.1 ) HDPE Grade PE80-PN6.0, 63mm dia | Mtr | 150.15 | 150.15 | 40.0 | False | None | None | False | None | False | 6006.0 | 0 |
| 2884235 | 94343 | None | 003 | Providing, supplying to work site,Single Phase Submersible Pump Sets
of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000
specifications,with testing of as per instructions of engineer incharge of
work and latest amendments. (CM SR 2021-22 P.No. 158/Vol-5/6.1/P060A) 7 Stage | No | 14148.75 | 14148.75 | 2.0 | False | None | None | False | None | False | 28297.5 | 0 |
| 2884236 | 94343 | None | 004 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete as per the direction of engineer incharge of work.external work. - 32mm nominal dia pipes ( PWD SR 2021-22 P.No. 8/Vol-2/ 13.33.4 /corrigendum-1) | Mtr | 375.9 | 375.9 | 100.0 | False | None | None | False | None | False | 37590.0 | 0 |
| 2884237 | 94343 | None | 005 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.0m spacing. this includes jointing of pipes and fittings with one step solvent cementand the cost of cutting chase and making good the same including testing of joints complete as per the direction of engineer incharge of work Conclead work, including cutting chase and making good the walls etc - 20mm nominal dia pipes ( PWD SR 2021-22 P.No. 8/Vol-2/ 13.32.2/corrigendum-1 ) | Mtr | 391.65 | 391.65 | 70.0 | False | None | None | False | None | False | 27415.5 | 0 |
| 2884238 | 94343 | None | 005 | Cutting holes upto 30x30 cm in walls including making good the same : with common burnt clay F.P.S (non-modular) Bricks (CM SR 2021-22 P.No. 119/Vol-2/ 13.36) | Each | 279.3 | 279.3 | 40.0 | False | None | None | False | None | False | 11172.0 | 0 |
| 2884239 | 94343 | None | 006 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore ( CM SR 2021-22 P.No. 115/Vol-1/ 13.2.2/corrigendum-1) | Each | 362.25 | 362.25 | 10.0 | False | None | None | False | None | False | 3622.5 | 0 |
| 2884240 | 94343 | None | 007 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore ( CM SR 2021-22 P.No. 115/Vol-1/ 13.4.2) | Each | 605.85 | 605.85 | 5.0 | False | None | None | False | None | False | 3029.25 | 0 |
| 2884241 | 94343 | None | 008 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ( CM SR 2021-22 P.No. 123/Vol-2/ 14.3.1) | Each | 5255.25 | 5255.25 | 5.0 | False | None | None | False | None | False | 26276.25 | 0 |
| 2884242 | 94343 | None | 009 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making dood to walls and floors. 100mm inlet 75 mm outlet ( CM SR 2021-22 P.No. 115/Vol-1/ 13.46/corrigendum-1) | Each | 498.75 | 498.75 | 10.0 | False | None | None | False | None | False | 4987.5 | 0 |
| 2884243 | 94343 | None | 010 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps
complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern ( CM SR 2021-22 P.No. 123/Vol-2/ 14.4.1) | Each | 3712.8 | 3712.8 | 2.0 | False | None | None | False | None | False | 7425.6 | 0 |
| 2884244 | 94343 | None | 011 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.( CM SR 2021-22 P.No. 187/Vol-5/ 8/T130B ) | Each | 5246.85 | 5246.85 | 5.0 | False | None | None | False | None | False | 26234.25 | 0 |
| 2884245 | 94343 | None | 012 | Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the PE Inspection chambres with lid consisting of inlet & outlet arrangements with base, riser of min. 0.42 m depth which includes earth work, fixing in CC-1:2:4 with appurtenances., complete. (c) civil works like Earthwork excavation for the pipeline trenches for laying of PVC-U pipes for the house connections in all types of soils , disintegrated rock,soft rock, hard rock, including cutting of any road using , crossing drains, compound, Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, c.c. wood work, steel work, including T & P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable and stacking the serviceable material with all lifts and lead , restoring the damaged portions inside or outside the property premises, refilling the portions of trenches that are dug open including linking to existing sewer network with appurtenances.
complete. ( CM SR 2021-22 P.No. 187/Vol-5/60.1/T800A ) 110 mm dia | No | 8214.15 | 8214.15 | 3.0 | False | None | None | False | None | False | 24642.45 | 0 |
| 2884246 | 94343 | None | 013 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer ( CM SR 2021-22 P.No. 123/Vol-2/ 14.7A) | Each | 3778.95 | 3778.95 | 5.0 | False | None | None | False | None | False | 18894.75 | 0 |
| 2884247 | 94343 | None | 014 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ( CM SR 2021-22 P.No. 123/Vol-2/ 14.40.2) | Each | 399.0 | 399.0 | 5.0 | False | None | None | False | None | False | 1995.0 | 0 |
| 2884248 | 94343 | None | 015 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ( CM SR 2021-22 P.No. 128/Vol-2/ 14.31) | Each | 1019.55 | 1019.55 | 10.0 | False | None | None | False | None | False | 10195.5 | 0 |
| 2884249 | 94343 | None | 016 | KSRB 13-11.1 : Providing and placing on terrace (at all floor levels) polyethylene water storage tanks, IS : 12701marked with cover and suitable locking arrangements, making necessary holes for inlet, outlet and over flow pipes but with out fittings and the base support for tank ( CM SR 2021-22 P.No. 128/Vol-2/ 13.34) | Ltr | 8.4 | 8.4 | 2500.0 | False | None | None | False | None | False | 21000.0 | 0 |
| 2884250 | 94343 | None | 017 | Providing and fixing on wall face unplastcised Rigid PVC rain water pipes confirming to IS:13592 Type A, including jointing with seal ring confirming to IS:5382, leaving 10mm gap for thermal expansion,(i) single socketed pipes 100mm diameter. ( CM SR 2021-22 P.No. 119/Vol-2/ 13.48) | Mtr | 265.65 | 265.65 | 80.0 | False | None | None | False | None | False | 21252.0 | 0 |
| 2884251 | 94343 | None | 018 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:( CM SR 2021-22 P.No. 134/Vol-5/1.7/M010G ) PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Mtr | 413.7 | 413.7 | 100.0 | False | None | None | False | None | False | 41370.0 | 0 |
| 2884252 | 94343 | None | 001 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.point wiring using class A Materials Short point upto 3 mts from tapping point to out let via switch box | Point | 251.0 | 251.0 | 5.0 | False | None | None | False | None | False | 1255.0 | 0 |
| 2884253 | 94343 | None | 002 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.point wiring using class A Materials Medium point above 3 mts upto 6mts from tapping point to outlet via switch box | Point | 361.0 | 361.0 | 10.0 | False | None | None | False | None | False | 3610.0 | 0 |
| 2884254 | 94343 | None | 003 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.point wiring using class A Materials Long point above 6 mts upto 10 mts from tapping point to outlet via switch box | Point | 542.0 | 542.0 | 10.0 | False | None | None | False | None | False | 5420.0 | 0 |
| 2884255 | 94343 | None | 004 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.point wiring using class A Materials Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches | Point | 671.0 | 671.0 | 5.0 | False | None | None | False | None | False | 3355.0 | 0 |
| 2884256 | 94343 | None | 005 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.point wiring using class A Materials Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches | Point | 979.0 | 979.0 | 5.0 | False | None | None | False | None | False | 4895.0 | 0 |
| 2884257 | 94343 | None | 006 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 1 - 3Way | Each | 91.0 | 91.0 | 1.0 | False | None | None | False | None | False | 91.0 | 0 |
| 2884258 | 94343 | None | 007 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.4 - 5Way | Each | 122.0 | 122.0 | 1.0 | False | None | None | False | None | False | 122.0 | 0 |
| 2884259 | 94343 | None | 008 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 Way | Each | 149.0 | 149.0 | 1.0 | False | None | None | False | None | False | 149.0 | 0 |
| 2884260 | 94343 | None | 008 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way | Each | 195.0 | 195.0 | 1.0 | False | None | None | False | None | False | 195.0 | 0 |
| 2884261 | 94343 | None | 001 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3Way | Each | 123.0 | 123.0 | 10.0 | False | None | None | False | None | False | 1230.0 | 0 |
| 2884262 | 94343 | None | 002 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 4-5 way | Each | 138.0 | 138.0 | 5.0 | False | None | None | False | None | False | 690.0 | 0 |
| 2884263 | 94343 | None | 003 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 6 wat | Each | 212.0 | 212.0 | 5.0 | False | None | None | False | None | False | 1060.0 | 0 |
| 2884264 | 94343 | None | 004 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 8 way | Each | 250.0 | 250.0 | 2.0 | False | None | None | False | None | False | 500.0 | 0 |
| 2884265 | 94343 | None | 008 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 10 / 12 Way | Each | 325.0 | 325.0 | 2.0 | False | None | None | False | None | False | 650.0 | 0 |
| 2884266 | 94343 | None | 009 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 16/18 way | Each | 354.0 | 354.0 | 2.0 | False | None | None | False | None | False | 708.0 | 0 |
| 2884267 | 94343 | None | 001 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 1 to 3 module | Each | 152.0 | 152.0 | 2.0 | False | None | None | False | None | False | 304.0 | 0 |
| 2884268 | 94343 | None | 002 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 4 module | Each | 175.0 | 175.0 | 5.0 | False | None | None | False | None | False | 875.0 | 0 |
| 2884269 | 94343 | None | 003 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 6 module | Each | 244.0 | 244.0 | 5.0 | False | None | None | False | None | False | 1220.0 | 0 |
| 2884270 | 94343 | None | 004 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 8 module | Each | 302.0 | 302.0 | 4.0 | False | None | None | False | None | False | 1208.0 | 0 |
| 2884271 | 94343 | None | 004 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 10/12 Module | Each | 363.0 | 363.0 | 4.0 | False | None | None | False | None | False | 1452.0 | 0 |
| 2884272 | 94343 | None | 006 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 12/10 Module | Each | 403.0 | 403.0 | 5.0 | False | None | None | False | None | False | 2015.0 | 0 |
| 2884273 | 94343 | None | 001 | Open Conduit System 25 mm dia 2mm thick | Mtr | 80.0 | 80.0 | 80.0 | False | None | None | False | None | False | 6400.0 | 0 |
| 2884274 | 94343 | None | 002 | Open Conduit System 32 mm dia 2.5mm thick | Mtr | 100.0 | 100.0 | 50.0 | False | None | None | False | None | False | 5000.0 | 0 |
| 2884275 | 94343 | None | 001 | Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2mm thick | Mtr | 61.0 | 61.0 | 100.0 | False | None | None | False | None | False | 6100.0 | 0 |
| 2884276 | 94343 | None | 002 | Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 25 mm dia 2mm thick | Mtr | 70.0 | 70.0 | 150.0 | False | None | None | False | None | False | 10500.0 | 0 |
| 2884277 | 94343 | None | 003 | Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 32 mm dia 2.5mm thick | Mtr | 93.0 | 93.0 | 50.0 | False | None | None | False | None | False | 4650.0 | 0 |
| 2884278 | 94343 | None | 001 | Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia 2mm thick | Mtr | 75.0 | 75.0 | 100.0 | False | None | None | False | None | False | 7500.0 | 0 |
| 2884279 | 94343 | None | 002 | conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 25 mm dia 2mm thick | Mtr | 80.0 | 80.0 | 85.0 | False | None | None | False | None | False | 6800.0 | 0 |
| 2884280 | 94343 | None | 003 | Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 32 mm dia 2.5mm thick | Mtr | 105.0 | 105.0 | 10.0 | False | None | None | False | None | False | 1050.0 | 0 |
| 2884281 | 94343 | None | 001 | Supplying and fixing PVC/metal conduit deep junction box .19/20mm deep junction box | Each | 49.0 | 49.0 | 10.0 | False | None | None | False | None | False | 490.0 | 0 |
| 2884282 | 94343 | None | 002 | Supplying and fixing PVC/metal conduit deep junction box . 25mm deep junction box | Each | 51.0 | 51.0 | 15.0 | False | None | None | False | None | False | 765.0 | 0 |
| 2884283 | 94343 | None | 003 | Supplying and fixing PVC/metal conduit deep junction box .32mm deep junction box | Each | 69.0 | 69.0 | 10.0 | False | None | None | False | None | False | 690.0 | 0 |
| 2884284 | 94343 | None | 001 | WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 1.5 Sq.mm | Mtr | 26.0 | 26.0 | 150.0 | False | None | None | False | None | False | 3900.0 | 0 |
| 2884285 | 94343 | None | 002 | WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 2.5 sq.mm | Mtr | 40.0 | 40.0 | 150.0 | False | None | None | False | None | False | 6000.0 | 0 |
| 2884286 | 94343 | None | 003 | WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 4 sq.mm | Mtr | 59.0 | 59.0 | 200.0 | False | None | None | False | None | False | 11800.0 | 0 |
| 2884287 | 94343 | None | 004 | WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 6sq.mm | Mtr | 87.0 | 87.0 | 100.0 | False | None | None | False | None | False | 8700.0 | 0 |
| 2884288 | 94343 | None | 006 | WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 10sq.mm | Mtr | 157.0 | 157.0 | 100.0 | False | None | None | False | None | False | 15700.0 | 0 |
| 2884289 | 94343 | None | 015 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (CM SR 2021-22/P.No.100/Vol-2/12.12) Door D | Cum | 79111.2 | 79111.2 | 0.152 | False | None | None | False | None | False | 12024.9024 | 0 |
| 2884290 | 94343 | None | 015 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (CM SR 2021-22/P.No.100/Vol-2/12.12) D-3 No. D1 | Cum | 79111.2 | 79111.2 | 0.049 | False | None | None | False | None | False | 3876.4488 | 0 |