| 2890123 | 94622 | None | 2.5A | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle
| ha | 228.9 | 228.9 | 0.0136 | False | None | None | False | None | False | 3.11304 | 0 |
| 2890124 | 94622 | None | 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth
| Cum | 68.25 | 68.25 | 40.76 | False | None | None | False | None | False | 2781.87 | 0 |
| 2890125 | 94622 | None | 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m
| Cum | 76.65 | 76.65 | 53.36 | False | None | None | False | None | False | 4090.044 | 0 |
| 2890126 | 94622 | None | 1.15.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth
| Cum | 285.6 | 285.6 | 5.38 | False | None | None | False | None | False | 1536.528 | 0 |
| 2890127 | 94622 | None | 1.1A | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)
| Cum | 123.9 | 123.9 | 55.38 | False | None | None | False | None | False | 6861.582 | 0 |
| 2890128 | 94622 | None | 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
| Cum | 214.2 | 214.2 | 53.9 | False | None | None | False | None | False | 11545.38 | 0 |
| 2890129 | 94622 | None | 2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
| Cum | 5720.4 | 5720.4 | 9.93 | False | None | None | False | None | False | 56803.572 | 0 |
| 2890130 | 94622 | None | 5.2 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
| Cum | 5782.35 | 5782.35 | 12.88 | False | None | None | False | None | False | 74476.668 | 0 |
| 2890131 | 94622 | None | 5.3 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
| Cum | 5420.1 | 5420.1 | 11.59 | False | None | None | False | None | False | 62818.959 | 0 |
| 2890132 | 94622 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
| Cum | 5580.75 | 5580.75 | 5.15 | False | None | None | False | None | False | 28740.8625 | 0 |
| 2890133 | 94622 | None | 2.5.2 | PLINTH BEAM-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes & formwork all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 9484.65 | 9484.65 | 3.43 | False | None | None | False | None | False | 32532.3495 | 0 |
| 2890134 | 94622 | None | 2.5.2 | RCC BEAMS-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes & formwork all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 10116.96 | 10116.96 | 4.66 | False | None | None | False | None | False | 47145.0336 | 0 |
| 2890135 | 94622 | None | 2.5.2 | RCC SLAB-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes & formwork all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 9484.65 | 9484.65 | 8.82 | False | None | None | False | None | False | 83654.613 | 0 |
| 2890136 | 94622 | None | 2.5.2 | LINTELS-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes & formwork all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 10116.96 | 10116.96 | 1.3 | False | None | None | False | None | False | 13152.048 | 0 |
| 2890137 | 94622 | None | 2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including & formwork all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 8559.49 | 8559.49 | 0.84 | False | None | None | False | None | False | 7189.9716 | 0 |
| 2890138 | 94622 | None | 11.32 | Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
| Kg | 94.5 | 94.5 | 1818.95 | False | None | None | False | None | False | 171890.775 | 0 |
| 2890139 | 94622 | None | 6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
| Cum | 6991.95 | 6991.95 | 48.46 | False | None | None | False | None | False | 338829.897 | 0 |
| 2890140 | 94622 | None | 6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
| Sqm | 983.85 | 983.85 | 10.4 | False | None | None | False | None | False | 10232.04 | 0 |
| 2890141 | 94622 | None | 11.5.1 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
| Sqm | 3843.0 | 3843.0 | 15.75 | False | None | None | False | None | False | 60527.25 | 0 |
| 2890142 | 94622 | None | 12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.
| Cum | 64683.15 | 64683.15 | 0.17 | False | None | None | False | None | False | 10996.1355 | 0 |
| 2890143 | 94622 | None | 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
| No | 1555.05 | 1555.05 | 2.0 | False | None | None | False | None | False | 3110.1 | 0 |
| 2890144 | 94622 | None | 12.6 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
| No | 873.6 | 873.6 | 2.0 | False | None | None | False | None | False | 1747.2 | 0 |
| 2890145 | 94622 | None | 12.61 | Providing and fixing chromium plated brass night latch of approved
quality including necessary screws etc. complete.
| No | 652.05 | 652.05 | 2.0 | False | None | None | False | None | False | 1304.1 | 0 |
| 2890146 | 94622 | None | 12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete
| No | 183.75 | 183.75 | 4.0 | False | None | None | False | None | False | 735.0 | 0 |
| 2890147 | 94622 | None | 12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
| No | 116.55 | 116.55 | 4.0 | False | None | None | False | None | False | 466.2 | 0 |
| 2890148 | 94622 | None | 12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms
| No | 49.35 | 49.35 | 2.0 | False | None | None | False | None | False | 98.7 | 0 |
| 2890149 | 94622 | None | 12.75.1 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
| No | 211.05 | 211.05 | 6.0 | False | None | None | False | None | False | 1266.3 | 0 |
| 2890150 | 94622 | None | 10.6.3 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm
| No | 31.5 | 31.5 | 12.0 | False | None | None | False | None | False | 378.0 | 0 |
| 2890151 | 94622 | None | 12.57.4 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak
| Sqm | 4117.05 | 4117.05 | 3.46 | False | None | None | False | None | False | 14244.993 | 0 |
| 2890152 | 94622 | None | 12.88 | Providing & fixing of 2 track 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)
| Sqm | 6731.55 | 6731.55 | 12.31 | False | None | None | False | None | False | 82865.3805 | 0 |
| 2890153 | 94622 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
| Kg | 150.15 | 150.15 | 258.51 | False | None | None | False | None | False | 38815.2765 | 0 |
| 2890154 | 94622 | None | 8.4.2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside)
| Sqm | 270.9 | 270.9 | 200.74 | False | None | None | False | None | False | 54380.466 | 0 |
| 2890155 | 94622 | None | 8.1 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 179.55 | 179.55 | 123.16 | False | None | None | False | None | False | 22113.378 | 0 |
| 2890156 | 94622 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
| Sqm | 87.15 | 87.15 | 323.9 | False | None | None | False | None | False | 28227.885 | 0 |
| 2890157 | 94622 | None | 8.5.2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside)
| Sqm | 303.45 | 303.45 | 87.13 | False | None | None | False | None | False | 26439.5985 | 0 |
| 2890158 | 94622 | None | 8.79 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.
| Rmtr | 42.0 | 42.0 | 160.4 | False | None | None | False | None | False | 6736.8 | 0 |
| 2890159 | 94622 | None | 9.17.2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm
| Sqm | 1151.85 | 1151.85 | 51.85 | False | None | None | False | None | False | 59723.4225 | 0 |
| 2890160 | 94622 | None | 9.23 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.
| Sqm | 1976.1 | 1976.1 | 8.8 | False | None | None | False | None | False | 17389.68 | 0 |
| 2890161 | 94622 | None | 8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 99.75 | 99.75 | 123.16 | False | None | None | False | None | False | 12285.21 | 0 |
| 2890162 | 94622 | None | 8.29 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 218.4 | 218.4 | 87.13 | False | None | None | False | None | False | 19029.192 | 0 |
| 2890163 | 94622 | None | 8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 38.85 | 38.85 | 12.31 | False | None | None | False | None | False | 478.2435 | 0 |
| 2890164 | 94622 | None | 8.4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 94.5 | 94.5 | 12.31 | False | None | None | False | None | False | 1163.295 | 0 |
| 2890165 | 94622 | None | 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 42.23 | 42.23 | 3.47 | False | None | None | False | None | False | 146.5381 | 0 |
| 2890166 | 94622 | None | 8.47 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 110.21 | 110.21 | 3.47 | False | None | None | False | None | False | 382.4287 | 0 |
| 2890167 | 94622 | None | 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 251.32 | 251.32 | 28.76 | False | None | None | False | None | False | 7227.9632 | 0 |
| 2890168 | 94622 | None | 15.7 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)
| Sqm | 579.89 | 579.89 | 5.97 | False | None | None | False | None | False | 3461.9433 | 0 |
| 2890169 | 94622 | None | 9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.
| Sqm | 1068.11 | 1068.11 | 14.66 | False | None | None | False | None | False | 15658.4926 | 0 |
| 2890170 | 94622 | None | 8.36.2 | Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 142.14 | 142.14 | 80.0 | False | None | None | False | None | False | 11371.2 | 0 |
| 2890171 | 94622 | None | 1201 | PVC pipes of 6 Kg/cm2 for 110mm(1.894)
| m | 262.65 | 262.65 | 24.0 | False | None | None | False | None | False | 6303.6 | 0 |
| 2890172 | 94622 | None | 9.28 | Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with ce- ment mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications.
| Sqm | 2434.92 | 2434.92 | 4.26 | False | None | None | False | None | False | 10372.7592 | 0 |
| 2890173 | 94622 | None | 9.3 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.
| Sqm | 2466.85 | 2466.85 | 7.69 | False | None | None | False | None | False | 18970.0765 | 0 |
| 2890174 | 94622 | None | 6.21 | Providing Tile brick masonry work 5 cm thick with common burnt clay Non Modular tile bricks of class designation 5.0 conforming to IS 2690 (Part I) in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth and upto floor I level including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
| Sqm | 721.0 | 721.0 | 14.1 | False | None | None | False | None | False | 10166.1 | 0 |
| 2890175 | 94622 | None | 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm dia pipes, From wash basin waste lines
| m | 228.9 | 228.9 | 10.0 | False | None | None | False | None | False | 2289.0 | 0 |
| 2890176 | 94622 | None | T090D | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines
| m | 145.95 | 145.95 | 15.0 | False | None | None | False | None | False | 2189.25 | 0 |
| 2890177 | 94622 | None | 13.4.2 | PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines
| m | 129.15 | 129.15 | 20.0 | False | None | None | False | None | False | 2583.0 | 0 |
| 2890178 | 94622 | None | 13.28.1 | PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines
| m | 267.75 | 267.75 | 20.0 | False | None | None | False | None | False | 5355.0 | 0 |
| 2890179 | 94622 | None | 14.40.2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter
| m | 185.85 | 185.85 | 10.0 | False | None | None | False | None | False | 1858.5 | 0 |
| 2890180 | 94622 | None | 14.3.1 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
| No | 1019.55 | 1019.55 | 1.0 | False | None | None | False | None | False | 1019.55 | 0 |
| 2890181 | 94622 | None | 14.10.1.4 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
| Each | 399.0 | 399.0 | 1.0 | False | None | None | False | None | False | 399.0 | 0 |
| 2890182 | 94622 | None | 13.15 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
| No | 5255.25 | 5255.25 | 1.0 | False | None | None | False | None | False | 5255.25 | 0 |
| 2890183 | 94622 | None | 14.7.1 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm
| Each | 4629.45 | 4629.45 | 1.0 | False | None | None | False | None | False | 4629.45 | 0 |
| 2890184 | 94622 | None | 13.86.1 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
| No | 605.85 | 605.85 | 4.0 | False | None | None | False | None | False | 2423.4 | 0 |
| 2890185 | 94622 | None | 13.86.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps
| No | 2655.45 | 2655.45 | 1.0 | False | None | None | False | None | False | 2655.45 | 0 |
| 2890186 | 94622 | None | 13.86.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.-15 mm dia
| No | 321.3 | 321.3 | 20.0 | False | None | None | False | None | False | 6426.0 | 0 |
| 2890187 | 94622 | None | 13.87.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.-20 mm dia
| Each | 391.65 | 391.65 | 30.0 | False | None | None | False | None | False | 11749.5 | 0 |
| 2890188 | 94622 | None | 13.87.6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.-25 mm dia
| No | 499.8 | 499.8 | 20.0 | False | None | None | False | None | False | 9996.0 | 0 |
| 2890189 | 94622 | None | 13.2.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)-40mm DWS
| Each | 492.45 | 492.45 | 20.0 | False | None | None | False | None | False | 9849.0 | 0 |
| 2890190 | 94622 | None | 13.34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)-50mm DWS
| No | 737.1 | 737.1 | 20.0 | False | None | None | False | None | False | 14742.0 | 0 |
| 2890191 | 94622 | None | 14.7.1 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore
| Each | 220.5 | 220.5 | 5.0 | False | None | None | False | None | False | 1102.5 | 0 |
| 2890192 | 94622 | None | 13.4.1 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank.
| No | 8.4 | 8.4 | 500.0 | False | None | None | False | None | False | 4200.0 | 0 |
| 2890193 | 94622 | None | 13.4.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
| Each | 2655.45 | 2655.45 | 5.0 | False | None | None | False | None | False | 13277.25 | 0 |
| 2890194 | 94622 | None | 14.22A | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm dia
| No | 554.4 | 554.4 | 2.0 | False | None | None | False | None | False | 1108.8 | 0 |
| 2890195 | 94622 | None | 13.28.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm dia
| Each | 61.95 | 61.95 | 4.0 | False | None | None | False | None | False | 247.8 | 0 |
| 2890196 | 94622 | None | 13.28.2 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20 mm nominal bore, weighing not less than 40 g
| No | 94.5 | 94.5 | 4.0 | False | None | None | False | None | False | 378.0 | 0 |
| 2890197 | 94622 | None | 1.1.1 | Mains Pipe.
Supplying heavy gauge PVC conduit pipe …….dia .mm
thick confirming to IS 2509 with suitable size bends, junction
boxes, adhesive paste etc., and fixing using inverted wood
plugs in case of RCC ceiling and RCC wall / stone structure
or rawl plugs in case of brick walls and cement plastering the
damaged portion using heavy gauge saddles at an interval
of 700mm using NF screws. 1.1.1) 19/20mm dia 2mm thick
PWD,Elct, SR 2021-22 Page No. 1 IItem code 1.1.1
| Rmtr | 68.0 | 68.0 | 100.0 | False | None | None | False | None | False | 6800.0 | 0 |
| 2890198 | 94622 | None | 2.2.1 | Points
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping casing capping using 2x1.5Sqmm
(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS
multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch
shall be fixed on the existing plastic sheet/ gang box, the
other end of the wires shall be terminated with sufficient
loose length in a wood/PVC round block. complete for each
outlet. 2.2.1) Short point upto 3Mtr from tapping point to out let via switch PWD,Elct, SR 2021-22 Page No. 3 IItem code 2.2.1
| Point | 251.0 | 251.0 | 3.0 | False | None | None | False | None | False | 753.0 | 0 |
| 2890199 | 94622 | None | 2.2.2 | Points
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping casing capping using 2x1.5Sqmm
(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS
multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch
shall be fixed on the existing plastic sheet/ gang box, the
other end of the wires shall be terminated with sufficient
loose length in a wood/PVC round block. complete for each
outlet.
2.2.2) Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box
PWD,Elct, SR 2021-22 Page No. 3 IItem code 2.2.2
| Point | 361.0 | 361.0 | 7.0 | False | None | None | False | None | False | 2527.0 | 0 |
| 2890200 | 94622 | None | 2.2.3 | Points
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping casing capping using 2x1.5Sqmm
(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS
multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch
shall be fixed on the existing plastic sheet/ gang box, the
other end of the wires shall be terminated with sufficient
loose length in a wood/PVC round block. complete for each
outlet.
2.2.3) Long point above 6m upto 10m from tapping point to out let via
switch box
PWD,Elct, SR2021-22 Page No. 3 IItem code 2.2.3
| Point | 542.0 | 542.0 | 5.0 | False | None | None | False | None | False | 2710.0 | 0 |
| 2890201 | 94622 | None | 2.3.2 | Wire:
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed
system of wiring with specified IS-694:confirming to latest
amendments.
2.3.2)1.5 mm2
PWD,Elct, SR 2019-20 Page No. 3 IItem code 2.3.2
| Mtr | 26.0 | 26.0 | 50.0 | False | None | None | False | None | False | 1300.0 | 0 |
| 2890202 | 94622 | None | 2.3.3 | Wire:
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed
system of wiring with specified IS-694:confirming to latest
amendments.
2.3.3)2.5 sqmm
PWD,Elct, SR 2021-22 Page No. 3 IItem code2.3.3
| Rmtr | 40.0 | 40.0 | 95.0 | False | None | None | False | None | False | 3800.0 | 0 |
| 2890203 | 94622 | None | 3.3.4 | PVC modular box::
Supplying and fixing surface/flush mounting unbreakable
PVC modular box suitable for mounting modular switch
plates with due groove cutting in Brick/C.C wall, including
necessary rawl plugs, Machine/NF screws etc., complete. 3.3.1)1-3 Wayy
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.3.4
| No | 91.0 | 91.0 | 1.0 | False | None | None | False | None | False | 91.0 | 0 |
| 2890204 | 94622 | None | 3.3.5 | PVC modular box::
Supplying and fixing surface/flush mounting unbreakable
PVC modular box suitable for mounting modular switch
plates with due groove cutting in Brick/C.C wall, including
necessary rawl plugs, Machine/NF screws etc., complete. 3.3.5)10-12 Way
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.3.5
| No | 277.0 | 277.0 | 1.0 | False | None | None | False | None | False | 277.0 | 0 |
| 2890205 | 94622 | None | 3.3.6 | PVC modular box::
Supplying and fixing surface/flush mounting unbreakable
PVC modular box suitable for mounting modular switch
plates with due groove cutting in Brick/C.C wall, including
necessary rawl plugs, Machine/NF screws etc., complete. 3.3.6)16-18 Way
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.3.6
| No | 225.0 | 225.0 | 1.0 | False | None | None | False | None | False | 225.0 | 0 |
| 2890206 | 94622 | None | 3.5.1 | modular Switch Plate
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc., complete on the existing metal/PVC box. 3.5.1)1 to 3 Module
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.5.1
| No | 152.0 | 152.0 | 1.0 | False | None | None | False | None | False | 152.0 | 0 |
| 2890207 | 94622 | None | 3.5.3 | modular Switch Plate
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc., complete on the existing metal/PVC box. 3.5.3)6 Module
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.5.3
| No | 244.0 | 244.0 | 1.0 | False | None | None | False | None | False | 244.0 | 0 |
| 2890208 | 94622 | None | 3.5.5 | modular Switch Plate
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc., complete on the existing metal/PVC box. 3.5.5) 10-12 Module
PWD,Elct, SR 2021-22 Page No. 5 IItem code3.5.5
| No | 363.0 | 363.0 | 1.0 | False | None | None | False | None | False | 363.0 | 0 |
| 2890209 | 94622 | None | 3.5.6 | modular Switch Plate
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc., complete on the existing metal/PVC box. 3.5.6) 16-18 Module
PWD,Elct, SR 2021-22 Page No. 5 IItem code3.5.6
| No | 403.0 | 403.0 | 1.0 | False | None | None | False | None | False | 403.0 | 0 |
| 2890210 | 94622 | None | 3.6.1 | Modular switch
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293. 3.6.1)6Amps one way.
PWD,Elct, SR 2021-22 Page No.5 IItem code 3.6.1
| No | 88.0 | 88.0 | 17.0 | False | None | None | False | None | False | 1496.0 | 0 |
| 2890211 | 94622 | None | 3.6.3 | Modular socket
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293. 3.6.3)6Amps 3way socket
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.6.3
| No | 162.0 | 162.0 | 2.0 | False | None | None | False | None | False | 324.0 | 0 |
| 2890212 | 94622 | None | 3.6.4 | Stepped Fan Regulator.
Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854
and IS 1293. 3.6.4)Stepped Fan Regulator Two Module
PWD,Elct, SR 2021-22 Page No. 5 IItem code 3.6.4
| No | 313.0 | 313.0 | 3.0 | False | None | None | False | None | False | 939.0 | 0 |
| 2890213 | 94622 | None | 3.14.6 | Batten Holder
Supplying and fixing/replacing of 6/16/32Amps electrical
accessories on existing switch board. 3.14.6) 6 Amps lamp holder
PWD,Elct, SR 2021-22 Page No. 6 IItem code 3.14.6
"
| No | 63.0 | 63.0 | 12.0 | False | None | None | False | None | False | 756.0 | 0 |
| 2890214 | 94622 | None | 3.14.5 | Celling Rose
Supplying and fixing/replacing of 6/16/32Amps electrical
accessories on existing switch board. 3.14.5) 6Amps Bakelite ceiling rose
PWD,Elct, SR 2021-22 Page No.6 IItem code 3.14.5
| No | 63.0 | 63.0 | 3.0 | False | None | None | False | None | False | 189.0 | 0 |
| 2890215 | 94622 | None | 11.3.2 | LED Tube Fitting
Supplying of .feet -PVC Batten with integrated LED tube .
W with high quality diffuser with Life of 25000 burning
hours & 70% lumen maintenance with CRI 80. Power
Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE
approved. 2 years Warranty against any manufacturing defect
working under standard electrical condition.
11.3.2) LED light fitting 1 x 4' - 20/22 W
PWD,Elct, SR 2021-22 Page No.34 IItem code 11.3.2
| No | 740.0 | 740.0 | 7.0 | False | None | None | False | None | False | 5180.0 | 0 |
| 2890216 | 94622 | None | 13.7.1 | LED Fitting fixing Charges
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. 13.7.1) On wall / ceiling / Rafter / Girders
PWD,Elct, SR 2021-22 Page No.45 IItem code 13.7.1
"
| No | 119.0 | 119.0 | 7.0 | False | None | None | False | None | False | 833.0 | 0 |
| 2890217 | 94622 | None | 6.3.1 | Fans 48
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 6.3.1) 48"" Sweep (1200mm) Regular model
Page No. 23 IItem code6.3.1 PWD,Elct, SR 2021-22
| No | 2085.0 | 2085.0 | 3.0 | False | None | None | False | None | False | 6255.0 | 0 |
| 2890218 | 94622 | None | 13.11 | Fan Fixing Charges Fixing a ceiling / wall mounting fan of all capacities and all
types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Page No. 46 IItem code13.11 PWD,Elct, SR 2021-22
| No | 281.0 | 281.0 | 3.0 | False | None | None | False | None | False | 843.0 | 0 |
| 2890219 | 94622 | None | 5.6.1 | Wood board
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 5.6.1) 8"" x 6"" x 1.5""
PWD,Elct, SR 2021-22 Page No. 10 IItem code 5.6.1
| No | 76.0 | 76.0 | 1.0 | False | None | None | False | None | False | 76.0 | 0 |
| 2890220 | 94622 | None | 5.7.2 | Fuses
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2)32Amps
PWD,Elct, SR 2021-22 Page No. 10 IItem code 5.7.2
| No | 200.0 | 200.0 | 2.0 | False | None | None | False | None | False | 400.0 | 0 |
| 2890221 | 94622 | None | 5.17.4 | MCB Switches.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
5.17.1) 6-32 A SP
PWD,Elct, SR 2021-22 Page No. 13 IItem code5.17.4
| No | 523.0 | 523.0 | 1.0 | False | None | None | False | None | False | 523.0 | 0 |
| 2890222 | 94622 | None | 17.4 | MCB Switches.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
5.17.4) 6-32 Amps DP
PWD,Elct, SR 2021-22 Page No. 13 IItem code5.17.4
| No | 1103.0 | 1103.0 | 1.0 | False | None | None | False | None | False | 1103.0 | 0 |
| 2890223 | 94622 | None | 5.42.2 | MS Box Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 5.42.2) 16SWG PWD,Elct, SR 2021-22 Page No. 15 IItem code5.42.2
| Sq CM | 0.38 | 0.38 | 5550.0 | False | None | None | False | None | False | 2109.0 | 0 |
| 2890224 | 94622 | None | 11.11.5 | LED Lamps Supplying & fixing retrofit type PL LED Lamp .W
LED linear source with CCT 6500 degree K, CR 70%.
efficacy 80 lumen per watt, life 25000 burning hours
and Compliance to IS 10322/IEC 60598, LM 79 & LM
80. The LED are driven by HF electronic driver integrated
in the system, with PF 0.95, power loss should 5% of
lamp wattage., short circuit & open circuit protection to be
integrated in the circuit, THD less than 20%, Life as per LM
79. The operating input voltage should be between 130 to
275 volts. Tested by NABL/CPRI accredited laboratory with
2 years Warranty against any manufacturing defect working
under standard electrical condition. 11.11.5) 12W, 6500K PWD,Elct, SR2019-20 Page No.38 IItem code 11.11.5
| Each | 237.0 | 237.0 | 1.0 | False | None | None | False | None | False | 237.0 | 0 |
| 2890225 | 94622 | None | 1.2.3 | Mains Pipe.
Supplying heavy gauge PVC conduit pipe . mm
dia.mm thick confirming to IS 2509 with suitable size
bends, metal/PVC Junction boxes, adhesive paste etc., and
running before concreting the slab. The conduit should be tied
to the reinforcement rods by using binding wires and unused
ways of junction boxes and pipe ends should be covered
using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 1.2.3) 32mm dia 2.5mm thick
PWD,Elct, SR 2021-22 Page No. 1 IItem code 1.2.3
| Mtr | 93.0 | 93.0 | 32.0 | False | None | None | False | None | False | 2976.0 | 0 |
| 2890226 | 94622 | None | 31.05 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable item no. 31.05) 2.5 to 25 Sqmm page no. 9 labour cost
| Kg | 16159.0 | 16159.0 | 0.04 | False | None | None | False | None | False | 646.36 | 0 |
| 2890227 | 94622 | None | 29.03 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. item no. 29.03 page no. 21 labour cost
| Cum | 389.0 | 389.0 | 12.0 | False | None | None | False | None | False | 4668.0 | 0 |
| 2890228 | 94622 | None | XXXIV | Transformer grounding e)GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs item no. XXXIV.a) page no.3 Hescom SR 2021-22 (Material Charges)
| Each | 725.0 | 725.0 | 1.0 | False | None | None | False | None | False | 725.0 | 0 |
| 2890229 | 94622 | None | XXXIV | Transformer grounding e)GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick
with bolts nuts, GI Strips and washers complete
Minimum Weight of GI Pipe: 7.3 Kgs item no. XXXIV.a) page no.3 Hescom SR 2021-22 (Material Charges)
| Each | 1733.0 | 1733.0 | 1.0 | False | None | None | False | None | False | 1733.0 | 0 |
| 2890230 | 94622 | None | 110 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 Material cost item no. 32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) page no.9
| Each | 114683.0 | 114683.0 | 0.04 | False | None | None | False | None | False | 4587.32 | 0 |
| 2890231 | 94622 | None | 111 | 49.GI Pipe B - Class as per IS-1239 item no. 49.04). GI Pipe - 40 mm Dia page no.16 Material
| Rmtr | 295.0 | 295.0 | 6.0 | False | None | None | False | None | False | 1770.0 | 0 |
| 2890232 | 94622 | None | 112 | Epoxy Terminating Kit (Pothead) suitable
for 1.1 kV, LTUG Cable Material cost item no. 35.01) Up to 4C x 50 Sqmm page no.10
| Set | 316.0 | 316.0 | 1.0 | False | None | None | False | None | False | 316.0 | 0 |
| 2890233 | 94622 | None | 113 | Hescom Charges towards power Sanction , MeterCharges
| LS | 5184.12 | 5184.12 | 1.0 | False | None | None | False | None | False | 5184.12 | 0 |
| 2890234 | 94622 | None | 13.28.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm dia
| Each | 605.85 | 605.85 | 1.0 | False | None | None | False | None | False | 605.85 | 0 |
| 2890235 | 94622 | None | 13.28.2 | Supplying and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
| No | 1023.75 | 1023.75 | 1.0 | False | None | None | False | None | False | 1023.75 | 0 |